This is a manual forward-port of #8944 and related fixes from v0.35.x.
One difference of note is that the CheckTx response messages no longer have a
field to record an error from the ABCI application. The code is set up so that
these could be reported directly to the CheckTx caller, but it would be an API
change, and right now a bunch of test plumbing depends on the existing semantics.
Also fix up tests relying on implementation-specific mempool behavior.
- Commit was setting the expected mempool size incorrectly.
- Fix sequence test not to depend on the incorrect size.
(cherry picked from commit 18b5a500da)
Pull out the library functionality from scripts/confix and move it to
internal/libs/confix. Replace scripts/confix with a simple stub that has the
same command-line API, but uses the library instead.
Related:
- Move and update unit tests.
- Move scripts/confix/condiff to scripts/condiff.
- Update test data for v34, v35, and v36.
- Update reference diffs.
- Update testdata README.
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
This is (#8446) pulled from the `main/libp2p` branch but without any
of the libp2p content, and is perhaps the easiest first step to enable
pluggability at the peer layer, and makes it possible hoist shims
(including for, say 0.34) into tendermint without touching the reactors.
(cherry picked from commit d5fb82e414)
Co-authored-by: Sam Kleinman <garen@tychoish.com>
I think the decision in #8806 is that we shouldn't do this yet, so I think it's best to just drop this.
(cherry picked from commit 636320f901)
Co-authored-by: Sam Kleinman <garen@tychoish.com>
Port the bug fix terra-money#76 to upstream. This is critical for ethermint json-rpc to work.
fix: prevent duplicate tx index if it succeeded before
fix: use CodeTypeOk instead of 0
fix: handle duplicate txs within the same block
Co-authored-by: jess jesse@soob.co
ref: #5281
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
(cherry picked from commit be6d74e657)
Co-authored-by: yihuang <huang@crypto.com>
This test was made flakey by #8839. The cooldown period means that the node in the test will not try to reconnect as quickly as the test expects. This change makes the cooldown shorter in the test so that the node quickly reconnects.
(cherry picked from commit 5274f80de4)
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* p2p: remove dial sleep and provide disconnect cooldown (#8839)
Alternative proposal for #8826
(cherry picked from commit 52b6dc19ba)
# Conflicts:
# internal/p2p/router.go
* fix merge
Co-authored-by: Sam Kleinman <garen@tychoish.com>
These timeouts default to 'do not time out' if they are not set. This times up resources, potentially indefinitely. If node on the other side of the the handshake is up but unresponsive, the[ handshake call](edec79448a/internal/p2p/router.go (L720)) will _never_ return.
This change wires up the values from the config file so that they are actually used.
Closes#8069
* Type `ABCIResponses` was just wrapping type `ResponseFinalizeBlock`. This patch removes the former.
* Did some renaming to avoid confusion on the data structure we are working with.
* We also remove any stale ABCIResponses we may have in the state store at the time of pruning
**IMPORTANT**: There is an undesirable side-effect of the unwrapping. An empty `ResponseFinalizeBlock` yields a 0-length proto-buf serialized buffer. This was not the case with `ABCIResponses`. I have added an interim solution, but open for suggestions on more elegant ones.
* abci:mempoolError from ResponseCheckTx
* responseCheckTx returns an error if Tendermint decides not to accept an app after CheckTx
*updated spec, upgrading.md and changelog.md
This pull requests adds the protocol buffer field for the `ABCI.VoteExtensionsEnableHeight` parameter. This proto field is threaded throughout all of the relevant places where consensus params are used and referenced.
This PR also adds validation of the consensus param updates. Previous consensus param changes didn't depend on _previous_ versions of the params, so this change adds a method for validating against the old params as well.
closes: #8453
This PR makes vote extensions optional within Tendermint. A new ConsensusParams field, called ABCIParams.VoteExtensionsEnableHeight, has been added to toggle whether or not extensions should be enabled or disabled depending on the current height of the consensus engine. Related to: #8453
Closes: #8575
This PR aims to fix the `LastCommitRound can only be negative for initial height 0` issue we see in the e2e tests by initializing the `state` object before starting the receive routines in the consensus reactor. This is somewhat inelegant, but it should fix the issue.
* Fix lock sequencing in socket client request tracking.
It is not safe to check base service state (IsRunning) while holding the lock
for the client state. If we do, then during shutdown we may deadlock with the
invocation of the OnStop handler, which the base service executes while holding
the service lock.
* Enqueue pending requests before sending them to the server.
If we don't do this, the server can reply before the request lands in the
queue. That will cause the receiver to terminate early for an unsolicited
response. So enqueue first: This is safe because we're doing it in the same
routine as services the channel, so we won't take another message till we are
safely past that point.
* Document what we did.
* Fix socket paths in tests.
In #3435 we allowed this timeout to override the global write timeout.
But after #8570 this meant we were applying a shorter timeout by default.
Don't do the patch if the timeout is already unlimited.
This is a temporary workaround; in light of #8561 I plan to get rid of this
option entirely during the v0.37 cycle, but meanwhile we should keep existing
use more or less coherent.
* rpc: rework timeouts to be per-method instead of global
Prior to this change, we set a 10-second global timeout for all RPC methods
using the net/http Server type's WriteTimeout. This meant that any request
whose handler did not return within that period would simply drop the
connection to the client.
This timeout is too short for a default, as evidenced by issues like [1] and
[2]. In addition, the mode of failure on the client side is confusing; it
shows up as a dropped connection (EOF) rather than a meaningful error from the
service. More importantly, various methods have diffent constraints: Some
should be able to return quickly, others may need to adjust based on the
application workload.
This is a first step toward supporting configurable timeouts. This change:
- Removes the server-wide default global timeout, and instead:
- Wires up a default context timeout for all RPC handlers.
- Increases the default timeout from 10s to 60s.
- Adds a hook to override this per-method as needed.
This does NOT expose the timeouts in the configuration file (yet).
[1] https://github.com/osmosis-labs/osmosis/issues/1391
[2] https://github.com/tendermint/tendermint/issues/8465
## What does this change do?
This pull request completes the change to the `metricsgen` metrics. It adds `go generate` directives to all of the files containing the `Metrics` structs.
Using the outputs of `metricsdiff` between these generated metrics and `master`, we can see that there is not a diff between the two sets of metrics when run locally.
```
[william@sidewinder] tendermint[wb/metrics-gen-transition]:. ◆ ./scripts/metricsgen/metricsdiff/metricsdiff metrics_master metrics_generated
[william@sidewinder] tendermint[wb/metrics-gen-transition]:. ◆
```
This change also adds parsing for a `metrics:` key in a field comment. If a comment line begins with `//metrics:` the rest of the line is interpreted to be the metric help text. Additionally, a bug where lists of labels were not properly quoted in the `metricsgen` rendered output was fixed.
Although we index block.height for blocks in the KV indexer, this reserved
attribute was not previously exposed to the event subscription API. Despite
being advertised in the OpenAPI spec, neither the old (websocket) nor new
(events) query interface could see it. This change exposes block.height to the
/events API.
In addition: Remove a non-public constant from types (finalize_block). This
value is used only as an internal tag by the indexer, and should not be exposed
to users of the public interface. (We could probably drop it entirely, as it
was previously a disambiguator for BeginBlock vs. EndBlock events, but keeping
a tag here simplifies the cleanup).
