Per https://blog.mergify.com/strict-mode-deprecation/, the strict mode
has been deprecated and will be turned off on 10-Jan-2022. This updates
the config to use the new, approved thing instead of the old thing.
(cherry picked from commit 2d4844f97f)
Some of our tests were creating a psql event sink and expecting
it to report (or not report) certain kinds of errors. These tests
were ill-founded in a couple of ways:
1. Tests that required the Postgres driver were not loading it.
This led to spurious successes on tests that wanted "some error"
from the sink constructor, but didn't exercise the right path.
2. Tests that wanted a Postgres sink to succeed without a database.
These tests "passed" because they weren't actually establishing a
connection to the database, but if they had would have failed for
the lack of one.
To fix this:
- Load the postgres driver in tests that need it.
- Verify connectivity before reporting successful creation of a PSQL event sink.
- Remove tests that wanted a psql sink without a database, since that case
is already tested elsewhere.
(cherry picked from commit ab1788b922)
* internal/proxy: add initial set of abci metrics (#7115)
This PR adds an initial set of metrics for use ABCI. The initial metrics enable the calculation of timing histograms and call counts for each of the ABCI methods. The metrics are also labeled as either 'sync' or 'async' to determine if the method call was performed using ABCI's `*Async` methods.
An example of these metrics is included here for reference:
```
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0001"} 0
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0004"} 5
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.002"} 12
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.009"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.02"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.1"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.65"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="2"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="6"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="25"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="+Inf"} 13
tendermint_abci_connection_method_timing_sum{chain_id="ci",method="commit",type="sync"} 0.007802058000000001
tendermint_abci_connection_method_timing_count{chain_id="ci",method="commit",type="sync"} 13
```
These metrics can easily be graphed using prometheus's `histogram_quantile(...)` method to pick out a particular quantile to graph or examine. I chose buckets that were somewhat of an estimate of expected range of times for ABCI operations. They start at .0001 seconds and range to 25 seconds. The hope is that this range captures enough possible times to be useful for us and operators.
* lint++
* docs: add abci timing metrics to the metrics docs (#7311)
* cherry-pick fixup
The event examples for the query filter language were not updated after the
change of key and value types from []byte to string. Also, the attributes need
to be a slice not a bare value.
(cherry picked from commit da3449599f)
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
If a subscriber arrives while the pubsub service is shutting down, the existing
code will return a nil subscription without error. With unlucky timing, this
may lead to a nil indirection panic in the RPC service.
To avoid that problem, make sure that when a subscription fails for this
reason, we report a non-nil error so that the client will detect it and give up
gracefully.
This is a manual backport of the changes to how we build and run the protobuf
toolchain images in Docker. The main effect here is to point to the new image
from ghcr.io/tendermint/docker-proto-builder, but to make that work it is also
necessary to update some of the branch pointers.
This change does NOT include the changes from #7269 and #7291 to point to the
proto files in the spec repo. To do that, we will need to create a branch or
tag on the spec that has the released version, which does not exist in the spec
history as it currently stands.
* p2p: reduce peer score for dial failures (#7265)
When dialing fails to succeed we should reduce the score of the peer,
which puts the peer at (potentially) greater chances of being removed
from the peer manager, and reduces the chance of the peer being
gossiped by the PEX reactor.
(cherry picked from commit 27560cf7a4)
Co-authored-by: Sam Kleinman <garen@tychoish.com>
The evidence test produces a set of mock evidence in the evidence pool of the 'Primary' node. The test then fills the evidence pools of secondaries with half of this mock evidence. Finally, the test waits until the secondary has an evidence pool as full as the primary.
The assertions that are removed here were checking that the primary and secondaries' evidence channels were empty. However, nothing in the test actually ensures that the channels are empty. The test only waits for the secondaries to have received the complete set of evidence, and the secondaries already received half of the evidence at the beginning. It's more than possible that the secondaries can receive the complete set of evidence and not finish reading the duplicate evidence off the channels.
(cherry picked from commit 4acd117b5e)
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
As a safety measure, don't allow a query string to be unreasonably
long. The query filter is not especially efficient, so a query that
needs more than basic detail should filter coarsely in the subscriber
and refine on the client side.
This affects Subscribe and TxSearch queries.
(cherry picked from commit 9dc3d7f9a2)
This ensures the implementation respects disabling the pex reactor.
(cherry picked from commit ffcd347ef6)
Co-authored-by: Sam Kleinman <garen@tychoish.com>
Fixes#7176. Some of the benchmarks create a bunch of different subscriptions all sharing the same query. These were all using the same client ID, which violates one of the subscriber rules. Ensure each subscriber gets a unique ID.
This has been broken as long as this library has been in the repo—I tracked it back to bb9aa85d and it was already failing there, so I think this never really worked. I'm not sure these test anything useful, but at least now they run.
(cherry picked from commit 1fd7060542)
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* p2p: add message type into the send/recv bytes metrics (#7155)
This pull request adds a new "mesage_type" label to the send/recv bytes metrics calculated in the p2p code.
Below is a snippet of the updated metrics that includes the updated label:
```
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_HasVote",peer_id="2551a13ed720101b271a5df4816d1e4b3d3bd133"} 652
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_HasVote",peer_id="4b1068420ef739db63377250553562b9a978708a"} 631
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_HasVote",peer_id="927c50a5e508c747830ce3ba64a3f70fdda58ef2"} 631
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_NewRoundStep",peer_id="2551a13ed720101b271a5df4816d1e4b3d3bd133"} 393
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_NewRoundStep",peer_id="4b1068420ef739db63377250553562b9a978708a"} 357
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_NewRoundStep",peer_id="927c50a5e508c747830ce3ba64a3f70fdda58ef2"} 386
```
(cherry picked from commit b4bc6bb4e8)
This pull request fixes a panic that exists in both mempools. The panic occurs when the ABCI client misses a response from the ABCI application. This happen when the ABCI client drops the request as a result of a full client queue. The fix here was to loop through the ordered list of recheck-tx in the callback until one matches the currently observed recheck request.
(cherry picked from commit b0130c88fb)
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
