Consider the following scenario:
1. Let nodes A,B,C form a cluster with RF=3
2. Write query with CL=QUORUM is submitted and is acknowledged by
nodes B,C
3. Follow-up read query with CL=QUORUM is sent to verify the write
from the previous step
4. Coordinator sends data/digest requests to the nodes A,B. Since the
node A is missing data, digest mismatches and data reconciliation
is triggered
5. The node A or B fails, becomes unavailable, etc
6. During reconciliation, data requests are sent to node A,B and fail
failing the entire read query
When the above scenario happens, the tests using `start_writes()` fail
with the following stacktrace:
```
...
> await finish_writes()
test/cluster/test_tablets_migration.py:259:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/pylib/util.py:241: in finish
await asyncio.gather(*tasks)
test/pylib/util.py:227: in do_writes
raise e
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
worker_id = 1
...
> rows = await cql.run_async(rd_stmt, [pk])
E cassandra.ReadFailure: Error from server: code=1300 [Replica(s) failed to execute read] message="Operation failed for test_1767777001181_bmsvk.test - received 1 responses and 1 failures from 2 CL=QUORUM." info={'consistency': 'QUORUM', 'required_responses': 2, 'received_responses': 1, 'failures': 1}
```
Note that when a node failure happens before/during a read query,
there is no test failure as the speculative retries are enabled
by default. Hence an additional data/digest read is sent to the third
remaining node.
However, the same speculative read is cancelled the moment, the read
query reaches CL which may trigger a read-repair.
This change:
- Retries the verification read in start_writes() on failure to mitigate
races between reads and node failures
- Adds additional logging to correlate Python exceptions with Scylla logs
Fixes https://github.com/scylladb/scylladb/issues/27478
Fixes https://github.com/scylladb/scylladb/issues/27974
Fixes https://github.com/scylladb/scylladb/issues/27494
Fixes https://github.com/scylladb/scylladb/issues/23529
Note that this change test flakiness observed during tablet transitions.
However, it serves as a workaround for a higher-level issue
https://github.com/scylladb/scylladb/issues/28125Closesscylladb/scylladb#28140
(cherry picked from commit e07fe2536e)
Closesscylladb/scylladb#28826
The test `test_sync_point` had a few shortcomings that made it flaky
or simply wrong:
1. We were verifying that hints were written by checking the size of
in-flight hints. However, that could potentially lead to problems
in rare situations.
For instance, if all of the hints failed to be written to disk, the
size of in-flight hints would drop to zero, but creating a sync point
would correspond to the empty state.
In such a situation, we should fail immediately and indicate what
the cause was.
2. A sync point corresponds to the hints that have already been written
to disk. The number of those is tracked by the metric `written`.
It's a much more reliable way to make sure that hints have been
written to the commitlog. That ensures that the sync point we'll
create will really correspond to those hints.
3. The auxiliary function `wait_for` used in the test works like this:
it executes the passed callback and looks at the result. If it's
`None`, it retries it. Otherwise, the callback is deemed to have
finished its execution and no further retries will be attempted.
Before this commit, we simply returned a bool, and so the code was
wrong. We improve it.
---
Note that this fixes scylladb/scylladb#28203, which was a manifestation
of scylladb/scylladb#25879. We created a sync point that corresponded
to the empty state, and so it immediately resolved, even when node 3
was still dead.
As a bonus, we rewrite the auxiliary code responsible for fetching
metrics and manipulating sync points. Now it's asynchronous and
uses the existing standard mechanisms available to developers.
Furthermore, we reduce the time needed for executing
`test_sync_point` by 27 seconds.
---
The total difference in time needed to execute the whole test file
(on my local machine, in dev mode):
Before:
CPU utilization: 0.9%
real 2m7.811s
user 0m25.446s
sys 0m16.733s
After:
CPU utilization: 1.1%
real 1m40.288s
user 0m25.218s
sys 0m16.566s
---
Refs scylladb/scylladb#25879
Fixes scylladb/scylladb#28203
Backport: This improves the stability of our CI, so let's
backport it to all supported versions.
- (cherry picked from commit 628e74f157)
- (cherry picked from commit ac4af5f461)
- (cherry picked from commit c5239edf2a)
- (cherry picked from commit a256ba7de0)
- (cherry picked from commit f83f911bae)
Parent PR: #28602Closesscylladb/scylladb#28621
* github.com:scylladb/scylladb:
test: cluster: Reduce wait time in test_sync_point
test: cluster: Fix test_sync_point
test: cluster: Await sync points asynchronously
test: cluster: Create sync points asynchronously
test: cluster: Fetch hint metrics asynchronously
This workflow calls the reusable backport-with-jira workflow from
scylladb/github-automation to enable automatic backport PR creation with
Jira sub-issue integration.
The workflow triggers on:
- Push to master/next-*/branch-* branches (for promotion events)
- PR labeled with backport/X.X pattern (for manual backport requests)
- PR closed/merged on version branches (for chain backport processing)
Features enabled by calling the shared workflow:
- Creates Jira sub-issues under the main issue for each backport version
- Sorts versions descending (highest first: 2025.4 -> 2025.3 -> 2025.2)
- Cherry-picks from previous version branch to avoid repeated conflicts
- On Jira API failure: adds comment to main issue, applies 'jira-sub-issue-creation-failed' label, continues with PR
Closesscylladb/scylladb#28804
(cherry picked from commit b211590bc0)
Closesscylladb/scylladb#28814
The connection's `cpu_concurrency_t` struct tracks the state of a connection
to manage the admission of new requests and prevent CPU overload during
connection storms. When a connection holds units (allowed only 0 or 1), it is
considered to be in the "CPU state" and contributes to the concurrency limits
used when accepting new connections.
The bug stems from the fact that `counted_data_source_impl::get` and
`counted_data_sink_impl::put` calls can interleave during execution. This
occurs because of `should_parallelize` and `_ready_to_respond`, the latter being
a future chain that can run in the background while requests are being read.
Consequently, while reading request (N), the system may concurrently be
writing the response for request (N-1) on the same connection.
This interleaving allows `return_all()` to be called twice before the
subsequent `consume_units()` is invoked. While the second `return_all()` call
correctly returns 0 units, the matching `consume_units()` call would
mistakenly take an extra unit from the semaphore. Over time, a connection
blocked on a read operation could end up holding an unreturned semaphore
unit. If this pattern repeats across multiple connections, the semaphore
units are eventually depleted, preventing the server from accepting any
new connections.
The fix ensures that we always consume the exact number of units that were
previously returned. With this change, interleaved operations behave as
follows:
get() return_all — returns 1 unit
put() return_all — returns 0 units
get() consume_units — takes back 1 unit
put() consume_units — takes back 0 units
Logically, the networking phase ends when the first network operation
concludes. But more importantly, when a network operation
starts, we no longer hold any units.
Other solutions are possible but the chosen one seems to be the
simplest and safest to backport.
Fixes SCYLLADB-485
Backport: all supported affected versions, bug introduced with initial feature implementation in: ed3e4f33fd
- (cherry picked from commit 0376d16ad3)
- (cherry picked from commit 3b98451776)
Parent PR: #28530Closesscylladb/scylladb#28713
* github.com:scylladb/scylladb:
test: decrease strain in test_startup_response
test: auth_cluster: add test for hanged AUTHENTICATING connections
transport: fix connection code to consume only initially taken semaphore units
transport: remove redundant futurize_invoke from counted data sink and source
For 2025.3 and 2025.4 this test runs order of magnitude
slower in debug mode. Potentially due to passwords::check
running in alien thread and overwhelming the CPU (this is
fixed in newer versions).
Decreasing the number of connections in test makes it fast
again, without breaking reproducibility.
As additional measure we double the timeout.
The connection's cpu_concurrency_t struct tracks the state of a connection
to manage the admission of new requests and prevent CPU overload during
connection storms. When a connection holds units (allowed only 0 or 1), it is
considered to be in the "CPU state" and contributes to the concurrency limits
used when accepting new connections.
The bug stems from the fact that `counted_data_source_impl::get` and
`counted_data_sink_impl::put` calls can interleave during execution. This
occurs because of `should_parallelize` and `_ready_to_respond`, the latter being
a future chain that can run in the background while requests are being read.
Consequently, while reading request (N), the system may concurrently be
writing the response for request (N-1) on the same connection.
This interleaving allows `return_all()` to be called twice before the
subsequent `consume_units()` is invoked. While the second `return_all()` call
correctly returns 0 units, the matching `consume_units()` call would
mistakenly take an extra unit from the semaphore. Over time, a connection
blocked on a read operation could end up holding an unreturned semaphore
unit. If this pattern repeats across multiple connections, the semaphore
units are eventually depleted, preventing the server from accepting any
new connections.
The fix ensures that we always consume the exact number of units that were
previously returned. With this change, interleaved operations behave as
follows:
get() return_all — returns 1 unit
put() return_all — returns 0 units
get() consume_units — takes back 1 unit
put() consume_units — takes back 0 units
Logically, the networking phase ends when the first network operation
concludes. But more importantly, when a network operation
starts, we no longer hold any units.
Other solutions are possible but the chosen one seems to be the
simplest and safest to backport.
Fixes SCYLLADB-485
(cherry picked from commit 0376d16)
If everything is OK, the sync point will not resolve with node 3 dead.
As a result, the waiting will use all of the time we allocate for it,
i.e. 30 seconds. That's a lot of time.
There's no easy way to verify that the sync point will NOT resolve, but
let's at least reduce the waiting to 3 seconds. If there's a bug, it
should be enough to trigger it at some point, while reducing the average
time needed for CI.
(cherry picked from commit f83f911bae)
The test had a few shortcomings that made it flaky or simply wrong:
1. We were verifying that hints were written by checking the size of
in-flight hints. However, that could potentially lead to problems
in rare situations.
For instance, if all of the hints failed to be written to disk, the
size of in-flight hints would drop to zero, but creating a sync point
would correspond to the empty state.
In such a situation, we should fail immediately and indicate what
the cause was.
2. A sync point corresponds to the hints that have already been written
to disk. The number of those is tracked by the metric `written`.
It's a much more reliable way to make sure that hints have been
written to the commitlog. That ensures that the sync point we'll
create will really correspond to those hints.
3. The auxiliary function `wait_for` used in the test works like this:
it executes the passed callback and looks at the result. If it's
`None`, it retries it. Otherwise, the callback is deemed to have
finished its execution and no further retries will be attempted.
Before this commit, we simply returned a bool, and so the code was
wrong. We improve it.
Note that this fixesscylladb/scylladb#28203, which was a manifestation
of scylladb/scylladb#25879. We created a sync point that corresponded
to the empty state, and so it immediately resolved, even when node 3
was still dead.
Refs scylladb/scylladb#25879Fixesscylladb/scylladb#28203
(cherry picked from commit a256ba7de0)
There's a dedicated HTTP API for communicating with the cluster, so
let's use it instead of yet another custom solution.
(cherry picked from commit c5239edf2a)
There's a dedicated HTTP API for communicating with the nodes, so let's
use it instead of yet another custom solution.
(cherry picked from commit ac4af5f461)
- Correct `calc_part_size` function since it could return more than 10k parts
- Add tests
- Add more checks in `calc_part_size` to comply with S3 limits
Fixes: https://scylladb.atlassian.net/browse/SCYLLADB-640
Must be ported back to 2025.3/4 and 2026.1 since we may encounter this bug in production clusters
- (cherry picked from commit 289e910cec)
- (cherry picked from commit 6280cb91ca)
- (cherry picked from commit 960adbb439)
Parent PR: #28592Closesscylladb/scylladb#28695
* github.com:scylladb/scylladb:
s3_client: add more constrains to the calc_part_size
s3_client: add tests for calc_part_size
s3_client: correct multipart part-size logic to respect 10k limit
When we build a materialized view we read the entire base table from start to
end to generate all required view udpates. If a view is created while another view
is being built on the same base table, this is optimized - we start generating
view udpates for the new view from the base table rows that we're currently
reading, and we read the missed initial range again after the previous view
finishes building.
The view building progress is only updated after generating view updates for
some read partitions. However, there are scenarios where we'll generate no
view updates for the entire read range. If this was not handled we could
end up in an infinite view building loop like we did in https://github.com/scylladb/scylladb/issues/17293
To handle this, we mark the view as built if the reader generated no partitions.
However, this is not always the correct conclusion. Another scenario where
the reader won't encounter any partitions is when view building is interrupted,
and then we perform a reshard. In this scenario, we set the reader for all
shards to the last unbuilt token for an existing partition before the reshard.
However, this partition may not exist on a shard after reshard, and if there
are also no partitions with higher tokens, the reader will generate no partitions
even though it hasn't finished view building.
Additionally, we already have a check that prevents infinite view building loops
without taking the partitions generated by the reader into account. At the end
of stream, before looping back to the start, we advance current_key to the end
of the built range and check for built views in that range. This handles the case
where the entire range is empty - the conditions for a built view are:
1. the "next_token" is no greater than "first_token" (the view building process
looped back, so we've built all tokens above "first_token")
2. the "current_token" is no less than "first_token" (after looping back, we've
built all tokens below "first_token")
If the range is empty, we'll pass these conditions on an empty range after advancing
"current_key" to the end because:
1. after looping back, "next_token" will be set to `dht::minimum_token`
2. "current_key" will be set to `dht::ring_position::max()`
In this patch we remove the check for partitions generated by the reader. This fixes
the issue with resharding and it does not resurrect the issue with infinite view building
that the check was introduced for.
Fixes https://github.com/scylladb/scylladb/issues/26523Closesscylladb/scylladb#26635
(cherry picked from commit 0a22ac3c9e)
Closesscylladb/scylladb#26887
When we delete a table in alternator, the schema change is performed on shard 0.
However, we actually use the storage_proxy from the shard that is handling the
delete_table command. This can lead to problems because some information is
stored only on shard 0 and using storage_proxy from another shard may make
us miss it.
In this patch we fix this by using the storage_proxy from shard 0 instead.
Fixes https://github.com/scylladb/scylladb/issues/27223Closesscylladb/scylladb#27224
(cherry picked from commit 3c376d1b64)
Closesscylladb/scylladb#27259
Currently, raft-based node operations with streaming use topology guards, but repair-based don't.
Topology guards ensure that if a respective session is closed (the operation has finished), each leftover operation being a part of this session fails. Thanks to that we won't incorrectly assume that e.g. the old rpc received late belongs to the newly started operation. This is especially important if the operation involves writes.
Pass a topology_guard down from raft_topology_cmd_handler to repair tasks. Repair tasks already support topology guards.
Fixes: https://github.com/scylladb/scylladb/issues/27759
No topology_guard in any version; needs backport to all versions
- (cherry picked from commit 3fe596d556)
- (cherry picked from commit 2be5ee9f9d)
Parent PR: #27839Closesscylladb/scylladb#28297
* github.com:scylladb/scylladb:
service: use session variable for streaming
service: pass topology guard to RBNO
Fixes#28678
If replenish loop exits the sleep condition, with an empty queue,
when "_shutdown" is already set, a waiter might get stuck, unsignalled
waiting for segments, even though we are exiting.
Simply move queue abort to always be done on loop exit.
Closesscylladb/scylladb#28679
(cherry picked from commit ab4e4a8ac7)
Closesscylladb/scylladb#28691
The test can currently fail like this:
```
> await cql.run_async(f"ALTER TABLE {ks}.test WITH tablets = {{'min_tablet_count': 1}}")
E cassandra.cluster.NoHostAvailable: ('Unable to complete the operation against any hosts', {<Host: 127.158.27.9:9042 datacenter1>: <Error from server: code=0000 [Server error] message="Failed to apply group 0 change due to concurrent modification">})
```
The following happens:
- node A is restarted and becomes the group0 leader,
- the driver sends the ALTER TABLE request to node B,
- the request hits group 0 concurrent modification error 10 times and fails
because node A performs tablet migrations at the the same time.
What is unexpected is that even though the driver session uses the default
retry policy, the driver doesn't retry the request on node A. The request
is guaranteed to succeed on node A because it's the only node adding group0
entries.
The driver doesn't retry the request on node A because of a missing
`wait_for_cql_and_get_hosts` call. We add it in this commit. We also reconnect
the driver just in case to prevent hitting scylladb/python-driver#295.
Moreover, we can revert the workaround from
4c9efc08d8, as the fix from this commit also
prevents DROP KEYSPACE failures.
The commit has been tested in byo with `_concurrent_ddl_retries{0}` to
verify that node A really can't hit group 0 concurrent modification error
and always receives the ALTER TABLE request from the driver. All 300 runs in
each build mode passed.
Fixes#25938Closesscylladb/scylladb#28632
(cherry picked from commit 0693091aff)
Closesscylladb/scylladb#28671
Introduce tests that validate the corrected multipart part-size
calculation, including boundary conditions and error cases.
(cherry picked from commit 6280cb91ca)
The previous calculation could produce more than 10,000 parts for large
uploads because we mixed values in bytes and MiB when determining the
part size. This could result in selecting a part size that still
exceeded the AWS multipart upload limit. The updated logic now ensures
the number of parts never exceeds the allowed maximum.
This change also aligns the implementation with the code comment: we
prefer a 50 MiB part size because it provides the best performance, and
we use it whenever it fits within the 10,000-part limit. If it does not,
we increase the part size (in bytes, aligned to MiB) to stay within the
limit.
(cherry picked from commit 289e910cec)
There's a dedicated API for fetching metrics now. Let's use it instead
of developing yet another solution that's also worse.
(cherry picked from commit 628e74f157)
In production environments, we observed cases where the S3 client would repeatedly fail to connect due to DNS entries becoming stale. Because the existing logic only attempted the first resolved address and lacked a way to refresh DNS state, the client could get stuck in a failure loop.
Introduce RR TTL and connection failure retry to
- re-resolve the RR in a timely manner
- forcefully reset and re-resolve addresses
- add a special case when the TTL is 0 and the record must be resolved for every request
Fixes: CUSTOMER-96
Fixes: CUSTOMER-139
Should be backported to 2025.3/4 and 2026.1 since we already encountered it in the production clusters for 2025.3
- (cherry picked from commit bd9d5ad75b)
- (cherry picked from commit 359d0b7a3e)
- (cherry picked from commit ce0c7b5896)
- (cherry picked from commit 5b3e513cba)
- (cherry picked from commit 66a33619da)
- (cherry picked from commit 6eb7dba352)
- (cherry picked from commit a05a4593a6)
- (cherry picked from commit 3a31380b2c)
- (cherry picked from commit 912c48a806)
Parent PR: #27891Closesscylladb/scylladb#28403
* github.com:scylladb/scylladb:
connection_factory: includes cleanup
dns_connection_factory: refine the move constructor
connection_factory: retry on failure
connection_factory: introduce TTL timer
connection_factory: get rid of shared_future in dns_connection_factory
connection_factory: extract connection logic into a member
connection_factory: remove unnecessary `else`
connection_factory: use all resolved DNS addresses
s3_test: remove client double-close
We currently make the local node the only token owner (that owns the
whole ring) in maintenance mode, but we don't update the topology properly.
The node is present in the topology, but in the `none` state. That's how
it's inserted by `tm.get_topology().set_host_id_cfg(host_id);` in
`scylla_main`. As a result, the node started in maintenance mode crashes
in the following way in the presence of a vnodes-based keyspace with the
NetworkTopologyStrategy:
```
scylla: locator/network_topology_strategy.cc:207:
locator::natural_endpoints_tracker::natural_endpoints_tracker(
const token_metadata &, const network_topology_strategy::dc_rep_factor_map &):
Assertion `!_token_owners.empty() && !_racks.empty()' failed.
```
Both `_token_owners` and `_racks` are empty. The reason is that
`_tm.get_datacenter_token_owners()` and
`_tm.get_datacenter_racks_token_owners()` called above filter out nodes
in the `none` state.
This bug basically made maintenance mode unusable in customer clusters.
We fix it by changing the node state to `normal`.
We also extend `test_maintenance_mode` to provide a reproducer for
Fixes#27988
This PR must be backported to all branches, as maintenance mode is
currently unusable everywhere.
- (cherry picked from commit a08c53ae4b)
- (cherry picked from commit 9d4a5ade08)
- (cherry picked from commit c92962ca45)
- (cherry picked from commit 408c6ea3ee)
- (cherry picked from commit 53f58b85b7)
- (cherry picked from commit 867a1ca346)
- (cherry picked from commit 6c547e1692)
- (cherry picked from commit 7e7b9977c5)
Parent PR: #28322Closesscylladb/scylladb#28497
* https://github.com/scylladb/scylladb:
test: test_maintenance_mode: enable maintenance mode properly
test: test_maintenance_mode: shutdown cluster connections
test: test_maintenance_mode: run with different keyspace options
test: test_maintenance_mode: check that group0 is disabled by creating a keyspace
test: test_maintenance_mode: get rid of the conditional skip
test: test_maintenance_mode: remove the redundant value from the query result
storage_proxy: skip validate_read_replica in maintenance mode
storage_service: set up topology properly in maintenance mode
Clean up the awkward move constructor that was declared in the header
but defaulted in a separate compilation unit, improving clarity and
consistency.
(cherry picked from commit 3a31380b2c)
If connecting to a provided address throws, renew the address list and
retry once (and only once) before giving up.
(cherry picked from commit a05a4593a6)
Add a TTL-based timer to connection_factory to automatically refresh
resolved host name addresses when they expire.
(cherry picked from commit 6eb7dba352)
Move state management from dns_connection_factory into state class
itself to encapsulate its internal state and stop managing it from the
`dns_connection_factory`
(cherry picked from commit 66a33619da)
`test_chunked_download_data_source_with_delays` was calling `close()` on a client twice, remove the unnecessary call
(cherry picked from commit bd9d5ad75b)
The same issue as the one fixed in
394207fd69.
This one didn't cause real problems, but it's still cleaner to fix it.
(cherry picked from commit 7e7b9977c5)
We extend the test to provide a reproducer for #27988 and to avoid
similar bugs in the future.
The test slows down from ~14s to ~19s on my local machine in dev
mode. It seems reasonable.
(cherry picked from commit 867a1ca346)
In the following commit, we make the rest run with multiple keyspaces,
and the old check becomes inconvenient. We also move it below to the
part of the code that won't be executed for each keyspace.
Additionally, we check if the error message is as expected.
(cherry picked from commit 53f58b85b7)
This skip has already caused trouble.
After 0668c642a2, the skip was always hit, and
the test was silently doing nothing. This made us miss #26816 for a long
time. The test was fixed in 222eab45f8, but we
should get rid of the skip anyway.
We increase the number of writes from 256 to 1000 to make the chance of not
finding the key on server A even lower. If that still happens, it must be
due to a bug, so we fail the test. We also make the test insert rows until
server A is a replica of one row. The expected number of inserted rows is
a small constant, so it should, in theory, make the test faster and cleaner
(we need one row on server A, so we insert exactly one such row).
It's possible to make the test fully deterministic, by e.g., hardcoding
the key and tokens of all nodes via `initial_token`, but I'm afraid it would
make the test "too deterministic" and could hide a bug.
(cherry picked from commit 408c6ea3ee)
In maintenance mode, the local node adds only itself to the topology. However,
the effective replication map of a keyspace with tablets enabled contains all
tablet replicas. It gets them from the tablets map, not the topology. Hence,
`network_topology_strategy::sanity_check_read_replicas` hits
```
throw std::runtime_error(format("Requested location for node {} not in topology. backtrace {}", id, lazy_backtrace()));
```
for tablet replicas other than the local node.
As a result, all requests to a keyspace with tablets enabled and RF > 1 fail
in debug mode (`validate_read_replica` does nothing in other modes). We don't
want to skip maintenance mode tests in debug mode, so we skip the check in
maintenance mode.
We move the `is_debug_build()` check because:
- `validate_read_replicas` is a static function with no access to the config,
- we want the `!_db.local().get_config().maintenance_mode()` check to be
dropped by the compiler in non-debug builds.
We also suppress `-Wunneeded-internal-declaration` with `[[maybe_unused]]`.
(cherry picked from commit 9d4a5ade08)
We currently make the local node the only token owner (that owns the
whole ring) in maintenance mode, but we don't update the topology properly.
The node is present in the topology, but in the `none` state. That's how
it's inserted by `tm.get_topology().set_host_id_cfg(host_id);` in
`scylla_main`. As a result, the node started in maintenance mode crashes
in the following way in the presence of a vnodes-based keyspace with the
NetworkTopologyStrategy:
```
scylla: locator/network_topology_strategy.cc:207:
locator::natural_endpoints_tracker::natural_endpoints_tracker(
const token_metadata &, const network_topology_strategy::dc_rep_factor_map &):
Assertion `!_token_owners.empty() && !_racks.empty()' failed.
```
Both `_token_owners` and `_racks` are empty. The reason is that
`_tm.get_datacenter_token_owners()` and
`_tm.get_datacenter_racks_token_owners()` called above filter out nodes
in the `none` state.
This bug basically made maintenance mode unusable in customer clusters.
We fix it by changing the node state to `normal`. We also update its
rack, datacenter, and shards count. Rack and datacenter are present in the
topology somehow, but there is nothing wrong with updating them again.
The shard count is also missing, so we better update it to avoid other
issues.
Fixes#27988
(cherry picked from commit a08c53ae4b)
When the topology coordinator refreshes load_stats, it caches load_stats for every node. In case the node becomes unresponsive, and fresh load_stats can not be read from the node, the cached version of load_stats will be used. This is to allow the load balancer to have at least some information about the table sizes and disk capacities of the host.
During load_stats refresh, we aggregate the table sizes from all the nodes. This procedure calls db.find_column_family() for each table_id found in load_stats. This function will throw if the table is not found. This will cause load_stats refresh to fail.
It is also possible for a table to have been dropped between the time load_stats has been prepared on the host, and the time it is processed on the topology coordinator. This would also cause an exception in the refresh procedure.
This fixes this problem by checking if the table still exists.
Fixes: #28359
- (cherry picked from commit 71be10b8d6)
- (cherry picked from commit 92dbde54a5)
Parent PR: #28440Closesscylladb/scylladb#28469
* github.com:scylladb/scylladb:
test: add test and reproducer for load_stats refresh exception
load_stats: handle dropped tables when refreshing load_stats
This patch adds a test and reproducer for the issue where the load_stats
refresh procedure throws exceptions if any of the tables have been
dropped since load_stats was produced.
(cherry picked from commit 92dbde54a5)
When the topology coordinator refreshes load_stats, it caches load_stats
for every node. In case the node becomes unresponsive, and fresh
load_stats can not be read from the node, the cached version of
load_stats will be used. This is to allow the load balancer to
have at least some information about the table sizes and disk capacities
of the host.
During load_stats refresh, we aggregate the table sizes from all the
nodes. This procedure calls db.find_column_family() for each table_id
found in load_stats. This function will throw if the table is not found.
This will cause load_stats refresh to fail.
It is also possible for a table to have been dropped between the time
load_stats has been prepared on the host, and the time it is processed
on the topology coordinator. This would also cause an exception in the
refresh procedure.
This patch fixes this problem by checking if the table still exists.
(cherry picked from commit 71be10b8d6)
…played
Currently, if flushing hints falls within the repair cache timeout, then the flush_time is set to batchlog_manager::_last_replay. _last_replay is updated on each replay, even if some batches weren't replayed. Due to that, we risk the data resurrection.
Update _last_replay only if all batches were replayed.
Fixes: https://github.com/scylladb/scylladb/issues/24415.
Needs backport to all live versions.
- (cherry picked from commit 4d0de1126f)
- (cherry picked from commit e3dcb7e827)
Parent PR: #26793Closesscylladb/scylladb#27092
* github.com:scylladb/scylladb:
test: extend test_batchlog_replay_failure_during_repair
db: batchlog_manager: update _last_replay only if all batches were replayed
The API contract in partition_version.hh states that when dealing with
evictable entries, a real cache tracker pointer has to be passed to all
methods that ask for it. The nonpopulating reader violates this, passing
a nullptr to the snapshot. This was observed to cause a crash when a
concurrent cache read accessed the snapshot with the null tracker.
A reproducer is included which fails before and passes after the fix.
Fixes: #26847Closesscylladb/scylladb#28163
(cherry picked from commit a53f989d2f)
Closesscylladb/scylladb#28278
The test is currently flaky. It tries to get the host ID of the bootstrapping
node via the REST API after the node crashes. This can obviously fail. The
test usually doesn't fail, though, as it relies on the host ID being saved
in `ScyllaServer._host_id` at this point by `ScyllaServer.try_get_host_id()`
repeatedly called in `ScyllaServer.start()`. However, with a very fast crash
and unlucky timings, no such call may succeed.
We deflake the test by getting the host ID before the crash. Note that at this
point, the bootstrapping node must be serving the REST API requests because
`await log.wait_for("finished do_send_ack2_msg")` above guarantees that the
node has started the gossip shadow round, which happens after starting the REST
API.
Fixes#28385Closesscylladb/scylladb#28388
(cherry picked from commit a2c1569e04)
Closesscylladb/scylladb#28415
A replaced node may have pending operation on it. The replace operation
will move the node into the 'left' state and the request will never be
completed. More over the code does not expect left node to have a
request. It will try to process the request and will crash because the
node for the request will not be found.
The patch checks is the replaced node has peening request and completes
it with failure. It also changes topology loading code to skip requests
for nodes that are in a left state. This is not strictly needed, but
makes the code more robust.
Fixes#27990Closesscylladb/scylladb#28009
(cherry picked from commit bee5f63cb6)
Closesscylladb/scylladb#28177
The test is currently flaky. It tries to get the host ID of the bootstrapping
node via the REST API after the node crashes. This can obviously fail. The
test usually doesn't fail, though, as it relies on the host ID being saved
in `ScyllaServer._host_id` at this point by `ScyllaServer.try_get_host_id()`
repeatedly called in `ScyllaServer.start()`. However, with a very fast crash
and unlucky timings, no such call may succeed.
We deflake the test by getting the host ID before the crash. Note that at this
point, the bootstrapping node must be serving the REST API requests because
`await coordinator_log.wait_for("delay_node_bootstrap: waiting for message")`
above guarantees that the node has submitted the join topology request, which
happens after starting the REST API.
Fixes#28227Closesscylladb/scylladb#28233
(cherry picked from commit e503340efc)
Closesscylladb/scylladb#28309
The test is currently flaky. It incorrectly assumes that a read with
CL=LOCAL_ONE will see the data inserted by a preceding write with
CL=LOCAL_ONE in the same datacenter with RF=2.
The same issue has already been fixed for CL=ONE in
21edec1ace. The difference is that
for CL=LOCAL_ONE, only dc1 is problematic, as dc2 has RF=1.
We fix the issue for CL=LOCAL_ONE by skipping the check for dc1.
Fixes#28253
The fix addresses CI flakiness and only changes the test, so it
should be backported.
Closesscylladb/scylladb#28274
(cherry picked from commit 1f0f694c9e)
Closesscylladb/scylladb#28303
Use session that was retrieved at the beginning of the handler for
node operations with streaming to ensure that the session id won't
change in between.
(cherry picked from commit 2be5ee9f9d)
Currently, raft-based node operations with streaming use topology
guards, but repair-based don't.
Topology guards ensure that if a respective session is closed
(the operation has finished), each leftover operation being a part
of this session fails. Thanks to that we won't incorrectly assume
that e.g. the old rpc received late belongs to the newly started
operation. This is especially important if the operation involves
writes.
Pass a topology_guard down from raft_topology_cmd_handler to repair
tasks. Repair tasks already support topology guards.
Fixes: https://github.com/scylladb/scylladb/issues/27759
(cherry picked from commit 3fe596d556)
Modify test_batchlog_replay_failure_during_repair to also check
that there isn't data resurrection if flushing hints falls within
the repair cache timeout.
(cherry picked from commit e3dcb7e827)
Currently, if flushing hints falls within the repair cache timeout,
then the flush_time is set to batchlog_manager::_last_replay.
_last_replay is updated on each replay, even if some batches weren't
replayed. Due to that, we risk the data resurrection.
Update _last_replay only if all batches were replayed.
Fixes: https://github.com/scylladb/scylladb/issues/24415.
(cherry picked from commit 4d0de1126f)
reader_permit::release_base_resources() is a soft evict for the permit:
it releases the resources aquired during admission. This is used in
cases where a single process owns multiple permits, creating a risk for
deadlock, like it is the case for repair. In this case,
release_base_resources() acts as a manual eviction mechanism to prevent
permits blockings each other from admission.
Recently we found a bad interaction between release_base_resources() and
permit eviction. Repair uses both mechanism: it marks its permits as
inactive and later it also uses release_base_resources(). This partice
might be worth reconsidering, but the fact remains that there is a bug
in the reader permit which causes the base resources to be released
twice when release_base_resources() is called on an already evicted
permit. This is incorrect and is fixed in this patch.
Improve release_base_resources():
* make _base_resources const
* move signal call into the if (_base_resources_consumed()) { }
* use reader_permit::impl::signal() instead of
reader_concurrency_semaphore::signal()
* all places where base resources are released now call
release_base_resources()
A reproducer unit test is added, which fails before and passes after the
fix.
Fixes: #28083Closesscylladb/scylladb#28155
(cherry picked from commit b7bc48e7b7)
Closesscylladb/scylladb#28242
In storage_service::raft_topology_cmd_handler we pass a lambda
wrapped in coroutine::lambda to a function that creates streaming_task_impl.
The lambda is kept in streaming_task_impl that invokes it in its run
method.
The lambda captures may be destroyed before the lambda is called, leading
to use after free.
Do not wrap a lambda passed to streaming_task_impl into coroutine::lambda.
Use this auto dissociate the lambda lifetime from the calling statement.
Fixes: https://github.com/scylladb/scylladb/issues/28200.
Closesscylladb/scylladb#28201
(cherry picked from commit 65cba0c3e7)
Closesscylladb/scylladb#28241
The loop that unwraps nested exception, rethrows nested exception and saves pointer to the temporary std::exception& inner on stack, then continues. This pointer is, thus, pointing to a released temporary
Closesscylladb/scylladb#28143
(cherry picked from commit 829bd9b598)
Closesscylladb/scylladb#28239
It is observed that:
repair - repair[667d4a59-63fb-4ca6-8feb-98da49946d8b]: Failed to update
system.repair_history table of node d27de212-6f32-4649ad76-a9ef1165fdcb:
seastar::rpc::remote_verb_error
(repair[667d4a59-63fb-4ca6-8feb-98da49946d8b]: range (minimum
token,maximum token) is not in the format of (start, end])
This is because repair checks the end of the range to be repaired needs
to be inclusive. When small_table_optimization is enabled for regular
repair, a (minimum token,maximum token) will be used.
To fix, we can relax the check of (start, end] for the min max range.
Fixes#27220
Backport to all active branches.
(cherry picked from commit e97a504)
Parent PR: #27357Closesscylladb/scylladb#27460
The `make_key` lambda erroneously allocates a fixed 8-byte buffer
(`sizeof(s.size())`) for variable-length strings, potentially causing
uninitialized bytes to be included. If such bytes exist and they are
not valid UTF-8 characters, deserialization fails:
```
ERROR 2026-01-16 08:18:26,062 [shard 0:main] testlog - snapshot_list_contains_dropped_tables: cql env callback failed, error: exceptions::invalid_request_exception (Exception while binding column p1: marshaling error: Validation failed - non-UTF8 character in a UTF8 string, at byte offset 7)
```
Fixes#28195.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Closesscylladb/scylladb#28197
(cherry picked from commit 8aca7b0eb9)
Closesscylladb/scylladb#28208
Consider the following scenario:
1. A table has RF=3 and writes use CL=QUORUM
2. One node is down
3. There is a pending tablet migration from the unavailable node
that is reverted
During the revert, there can be a time window where the pending replica
being cleaned up still accepts writes. This leads to write failures,
as only two nodes (out of four) are able to acknowledge writes.
This patch fixes the issue by adding a barrier to the cleanup_target
tablet transition state, ensuring that the coordinator switches back to
the previous replica set before cleanup is triggered.
Fixes https://github.com/scylladb/scylladb/issues/26512
It's a pre existing issue. Backport is required to all recent 2025.x versions.
- (cherry picked from commit 669286b1d6)
- (cherry picked from commit 67f1c6d36c)
- (cherry picked from commit 6163fedd2e)
Parent PR: #27413Closesscylladb/scylladb#27427
* github.com:scylladb/scylladb:
topology_coordinator: Fix the indentation for the cleanup_target case
topology_coordinator: Add barrier to cleanup_target
test_node_failure_during_tablet_migration: Increase RF from 2 to 3
Fixes#27992
When doing a commit log oversized allocation, we lock out all other writers by grabbing
the _request_controller semaphore fully (max capacity).
We thereafter assert that the semaphore is in fact zero. However, due to how things work
with the bookkeep here, the semaphore can in fact become negative (some paths will not
actually wait for the semaphore, because this could deadlock).
Thus, if, after we grab the semaphore and execution actually returns to us (task schedule),
new_buffer via segment::allocate is called (due to a non-fully-full segment), we might
in fact grab the segment overhead from zero, resulting in a negative semaphore.
The same problem applies later when we try to sanity check the return of our permits.
Fix is trivial, just accept less-than-zero values, and take same possible ltz-value
into account in exit check (returning units)
Added whitebox (special callback interface for sync) unit test that provokes/creates
the race condition explicitly (and reliably).
Closesscylladb/scylladb#27998
(cherry picked from commit a7cdb602e1)
Closesscylladb/scylladb#28097
Currently, tablet allocation intentionally ignores current load (
introduced by the commit #1e407ab) which could cause identical shard
selection when allocating a small number of tablets in the same topology.
When a tablet allocator is asked to allocate N tablets (where N is smaller
than the number of shards on a node), it selects the first N lowest shards.
If multiple such tables are created, each allocator run picks the same
shards, leading to tablet imbalance across shards.
This change initializes the load sketch with the current shard load,
scaled into the [0,1] range, ensuring allocation still remains even
while starting from globally least-loaded shards.
Fixes https://github.com/scylladb/scylladb/issues/27620
Closes https://github.com/scylladb/scylladb/pull/27802Closesscylladb/scylladb#28106
`test_schema_versioning_with_recovery` is currently flaky. It performs
a write with CL=ALL and then checks if the schema version is the same on
all nodes by calling `verify_table_versions_synced`. All nodes are expected
to sync their schema before handling the replica write. The node in
RECOVERY mode should do it through a schema pull, and other nodes should do
it through a group 0 read barrier.
The problem is in `verify_local_schema_versions_synced` that compares the
schema versions in `system.local`. The node in RECOVERY mode updates the
schema version in `system.local` after it acknowledges the replica write
as completed. Hence, the check can fail.
We fix the problem by making the function wait until the schema versions
match.
Note that RECOVERY mode is about to be retired together with the whole
gossip-based topology in 2026.2. So, this test is about to be deleted.
However, we still want to fix it, so that it doesn't bother us in older
branches.
Fixes#23803Closesscylladb/scylladb#28114
(cherry picked from commit 6b5923c64e)
Closesscylladb/scylladb#28175
We currently do it only for a bootstrapping node, which is a bug. The
missing IP can cause an internal error, for example, in the following
scenario:
- replace fails during streaming,
- all live nodes are shut down before the rollback of replace completes,
- all live nodes are restarted,
- live nodes start hitting internal error in all operations that
require IP of the replacing node (like client requests or REST API
requests coming from nodetool).
We fix the bug here, but we do it separately for replace with different
IP and replace with the same IP.
For replace with different IP, we persist the IP -> host ID mapping
in `system.peers` just like for bootstrap. That's necessary, since there
is no other way to determine IP of the replacing node on restart.
For replace with the same IP, we can't do the same. This would require
deleting the row corresponding to the node being replaced from
`system.peers`. That's fine in theory, as that node is permanently
banned, so its IP shouldn't be needed. Unfortunately, we have many
places in the code where we assume that IP of a topology member is always
present in the address map or that a topology member is always present in
the gossiper endpoint set. Examples of such places:
- nodetool operations,
- REST API endpoints,
- `db::hints::manager::store_hint`,
- `group0_voter_handler::update_nodes`.
We could fix all those places and verify that drivers work properly when
they see a node in the token metadata, but not in `system.peers`.
However, that would be too risky to backport.
We take a different approach. We recover IP of the replacing node on
restart based on the state of the topology state machine and
`system.peers` just after loading `system.peers`.
We rely on the fact that group 0 is set up at this point. The only case
where this assumption is incorrect is a restart in the Raft-based
recovery procedure. However, hitting this problem then seems improbable,
and even if it happens, we can restart the node again after ensuring
that no client and REST API requests come before replace is rolled back
on the new topology coordinator. Hence, it's not worth to complicate the
fix (by e.g. looking at the persistent topology state instead of the
in-memory state machine).
Fixes#28057
Backport this PR to all branches as it fixes a problematic bug.
- (cherry picked from commit fc4c2df2ce)
- (cherry picked from commit 4526dd93b1)
- (cherry picked from commit 749b0278e5)
- (cherry picked from commit 0fed9f94f8)
Manually cherry-picked:
- 90b5b2c5f5
- 92b165b8c0
Parent PR: #27435Closesscylladb/scylladb#28098
* https://github.com/scylladb/scylladb:
gossiper: add_saved_endpoint: make generations of excluded nodes negative
test: introduce test_full_shutdown_during_replace
utils: error_injection: allow aborting wait_for_message
raft topology: preserve IP -> ID mapping of a replacing node on restart
pylib/rest_client.py: encode injection name
utils/error_injection: allow to abort `injection_handler::wait_for_message()`
The explanation is in the new comment in `gossiper::add_saved_endpoint`.
We add a test for this change. It's "extremely white-box", but it's better
than nothing.
(cherry picked from commit 0fed9f94f8)
We currently do it only for a bootstrapping node, which is a bug. The
missing IP can cause an internal error, for example, in the following
scenario:
- replace fails during streaming,
- all live nodes are shut down before the rollback of replace completes,
- all live nodes are restarted,
- live nodes start hitting internal error in all operations that
require IP of the replacing node (like client requests or REST API
requests coming from nodetool).
We fix the bug here, but we do it separately for replace with different
IP and replace with the same IP.
For replace with different IP, we persist the IP -> host ID mapping
in `system.peers` just like for bootstrap. That's necessary, since there
is no other way to determine IP of the replacing node on restart.
For replace with the same IP, we can't do the same. This would require
deleting the row corresponding to the node being replaced from
`system.peers`. That's fine in theory, as that node is permanently
banned, so its IP shouldn't be needed. Unfortunately, we have many
places in the code where we assume that IP of a topology member is always
present in the address map or that a topology member is always present in
the gossiper endpoint set. Examples of such places:
- nodetool operations,
- REST API endpoints,
- `db::hints::manager::store_hint`,
- `group0_voter_handler::update_nodes`.
We could fix all those places and verify that drivers work properly when
they see a node in the token metadata, but not in `system.peers`.
However, that would be too risky to backport.
We take a different approach. We recover IP of the replacing node on
restart based on the state of the topology state machine and
`system.peers` just after loading `system.peers`.
We rely on the fact that group 0 is set up at this point. The only case
where this assumption is incorrect is a restart in the Raft-based
recovery procedure. However, hitting this problem then seems improbable,
and even if it happens, we can restart the node again after ensuring
that no client and REST API requests come before replace is rolled back
on the new topology coordinator. Hence, it's not worth to complicate the
fix (by e.g. looking at the persistent topology state instead of the
in-memory state machine).
(cherry picked from commit fc4c2df2ce)
Sometimes it's convenient to use slashes in injection names,
for example my_component/my_method/my_condition. Without quote()
we get 'handler not found' error from Scylla.
(cherry picked from commit 92b165b8c0)
Call discover_staging_sstables in view_update_generator::start() instead
of in the constructor, because the constructor is called during
initialization before sstables are loaded.
The initialization order was changed in 5d1f74b86a and caused this
regression. It means the view update generator won't discover staging
sstables on startup and view updates won't be generated for them. It
also causes issues in sstable cleanup.
view_update_generator::start() is called in a later stage of the
initialization, after sstable loading, so do the discovery of staging
sstables there.
Fixesscylladb/scylladb#27956
(cherry picked from commit 5077b69c06)
Closesscylladb/scylladb#28091
Currently, database::truncate_table_on_all_shards calls the table::can_flush only on the coordinator shard
and therefore it may miss shards with dirty data if the coordinator shard happens to have empty memtables, leading to clearing the memtables with dirty data rather than flushing them.
This change fixes that by making flush safe to be called, even if the memtable list is empty, and calling it on every shard that can flush (i.e. seal_immediate_fn is engaged).
Also, change database_test::do_with_some_data is use random keys instead of hard-coded key names, to reproduce this issue with `snapshot_list_contains_dropped_tables`.
Fixes#27639
* The issue exists since forever and might cause data loss due to wrongly clearing the memtable, so it needs backport to all live versions
- (cherry picked from commit ec4069246d)
- (cherry picked from commit 5be6b80936)
- (cherry picked from commit 0342a24ee0)
- (cherry picked from commit 02ee341a03)
- (cherry picked from commit 2a803d2261)
- (cherry picked from commit 93b827c185)
- (cherry picked from commit ebd667a8e0)
Parent PR: #27643Closesscylladb/scylladb#28071
* https://github.com/scylladb/scylladb:
test: database_test: do_with_some_data: randomize keys
database: truncate_table_on_all_shards: drop outdated TODO comment
database: truncate_table_on_all_shards: consider can_flush on all shards
memtable_list: unify can_flush and may_flush
test: database_test: add test_flush_empty_table_waits_on_outstanding_flush
replica: table, storage_group, compaction_group: add needs_flush
test: database_test: do_with_some_data_in_thread: accept void callback function
The driver must see server_c before we stop server_a, otherwise
there will be no live host in the pool when we attempt to drop
the keyspace:
```
@pytest.mark.asyncio
async def test_not_enough_token_owners(manager: ManagerClient):
"""
Test that:
- the first node in the cluster cannot be a zero-token node
- removenode and decommission of the only token owner fail in the presence of zero-token nodes
- removenode and decommission of a token owner fail in the presence of zero-token nodes if the number of token
owners would fall below the RF of some keyspace using tablets
"""
logging.info('Trying to add a zero-token server as the first server in the cluster')
await manager.server_add(config={'join_ring': False},
property_file={"dc": "dc1", "rack": "rz"},
expected_error='Cannot start the first node in the cluster as zero-token')
logging.info('Adding the first server')
server_a = await manager.server_add(property_file={"dc": "dc1", "rack": "r1"})
logging.info('Adding two zero-token servers')
# The second server is needed only to preserve the Raft majority.
server_b = (await manager.servers_add(2, config={'join_ring': False}, property_file={"dc": "dc1", "rack": "rz"}))[0]
logging.info(f'Trying to decommission the only token owner {server_a}')
await manager.decommission_node(server_a.server_id,
expected_error='Cannot decommission the last token-owning node in the cluster')
logging.info(f'Stopping {server_a}')
await manager.server_stop_gracefully(server_a.server_id)
logging.info(f'Trying to remove the only token owner {server_a} by {server_b}')
await manager.remove_node(server_b.server_id, server_a.server_id,
expected_error='cannot be removed because it is the last token-owning node in the cluster')
logging.info(f'Starting {server_a}')
await manager.server_start(server_a.server_id)
logging.info('Adding a normal server')
await manager.server_add(property_file={"dc": "dc1", "rack": "r2"})
cql = manager.get_cql()
await wait_for_cql_and_get_hosts(cql, [server_a], time.time() + 60)
> async with new_test_keyspace(manager, "WITH replication = {'class': 'NetworkTopologyStrategy', 'replication_factor': 2} AND tablets = { 'enabled': true }") as ks_name:
test/cluster/test_not_enough_token_owners.py:57:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
/usr/lib64/python3.14/contextlib.py:221: in __aexit__
await anext(self.gen)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
manager = <test.pylib.manager_client.ManagerClient object at 0x7f37efe00830>
opts = "WITH replication = {'class': 'NetworkTopologyStrategy', 'replication_factor': 2} AND tablets = { 'enabled': true }"
host = None
@asynccontextmanager
async def new_test_keyspace(manager: ManagerClient, opts, host=None):
"""
A utility function for creating a new temporary keyspace with given
options. It can be used in a "async with", as:
async with new_test_keyspace(ManagerClient, '...') as keyspace:
"""
keyspace = await create_new_test_keyspace(manager.get_cql(), opts, host)
try:
yield keyspace
except:
logger.info(f"Error happened while using keyspace '{keyspace}', the keyspace is left in place for investigation")
raise
else:
> await manager.get_cql().run_async("DROP KEYSPACE " + keyspace, host=host)
E cassandra.cluster.NoHostAvailable: ('Unable to complete the operation against any hosts', {<Host: 127.69.108.39:9042 dc1>: ConnectionException('Pool for 127.69.108.39:9042 is shutdown')})
test/cluster/util.py:544: NoHostAvailable
```
Fixes#28011Closesscylladb/scylladb#28040
(cherry picked from commit 34df158605)
Closesscylladb/scylladb#28070
The semaphore has detection and protection against regular resource
leaks, where some resources go unaccounted for and are not released by
the time the semaphore is destroyed. There is no detection or protection
against negative leaks: where resources are "made up" of thin air. This
kind of leaks looks benign at first sight, a few extra resources won't
hurt anyone so long as this is a small amount. But turns out that even a
single extra count resource can defeat a very important anti-deadlock
protection in can_admit_read(): the special case which admits a new
permit regardless of memory resources, when all original count resources
all available. This check uses ==, so if resource > original, the
protection is defeated indefinitely. Instead of just changing == to >=,
we add detection of such negative leaks to signal(), via
on_internal_error_noexcept().
At this time I still don't now how this negative leak happens (the code
doesn't confess), with this detection, hopefully we'll get a clue from
tests or the field. Note that on_internal_error_noexcept() will not
generate a coredump, unless ScyllaDB is explicitely configured to do so.
In production, it will just generate an error log with a backtrace.
The detection also clams the _resources to _initial_resources, to
prevent any damage from the negativae leak.
I just noticed that there is no unit test for the deadlock protection
described above, so one is added in this PR, even if only loosely
related to the rest of the patch.
Fixes: SCYLLADB-163
Closesscylladb/scylladb#27764
(cherry picked from commit e4da0afb8d)
Closesscylladb/scylladb#28002
With randomized keys, and since we're inserting only 2 keys,
it is possible that they would end up owned only by a single shard,
reproducing #27639 in snapshot_list_contains_dropped_tables.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit ebd667a8e0)
The comment was added in 83323e155e
Since then, table::seal_active_memtable was improved to guarantee
waiting on oustanding flushes on success (See d55a2ac762), so
we can remove this TODO comment (it also not covered by any issue
so nobody is planned to ever work on it).
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 93b827c185)
can_flush might return a different value for each shard
so check it right before deciding whether to flush or clear a memtable
shard.
Note that under normal condition can_flush would always return true
now that it checks only the presence of the seal memtable function
rather than check memtable_list::empty().
Fixes#27639
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 2a803d2261)
Now that we have a unit test proving that it's safe to flush an
empty memtable list there is no need to distinguish between
may_flush and can_flush.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 02ee341a03)
Test that table::flush waits on outstanding flushes, even if the active memtable is empty
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 0342a24ee0)
Table needs flush if not all its memtable lists are empty.
To be used in the next patch for a unit test.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 5be6b80936)
Many test cases already assume `func` is being called a seastar
thread and although the function they pass returns a (ready) future,
it serves no purpose other than to conform to the interface.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit ec4069246d)
Service levels cache is empty after upgrade to consistent topology
if no mutations are commited to `system.service_levels_v2` or rolling
restart is not done.
To fix the bug, this commit adds service levels cache reloading after
upgrading the SL data accessor to v2 in `storage_service::topology_state_load()`.
Fixes SCYLLADB-90
(cherry picked from commit be16e42cb0)
before doing migration to raft
There is no need to call `service_level_controller::upgrade_to_v2()`
on every topology state load, we only need to do it once.
(cherry picked from commit 53d0a2b5dc)
Fixes#27077
Multiple points can be clarified relating to:
* Names of each sub-procedure could be clearer
* Requirements of each sub-procedure could be clearer
* Clarify which keyspaces are relevant and how to check them
* Fix typos in keyspace name
Closesscylladb/scylladb#26855
(cherry picked from commit a0734b8605)
Closesscylladb/scylladb#27154
Currently, all apis that start a compaction have two versions:
synchronous and asynchronous. They share most of the implementation,
but some checks and params have diverged.
Unify the handlers of synchronous and asynchronous cleanup, major
compaction, and upgrade_sstables.
Fixes: https://github.com/scylladb/scylladb/issues/26715.
Requires backports to all live versions
- (cherry picked from commit 12dabdec66)
- (cherry picked from commit 044b001bb4)
- (cherry picked from commit fdd623e6bc)
Parent PR: #26746Closesscylladb/scylladb#26886
* github.com:scylladb/scylladb:
api: storage_service: tasks: unify upgrade_sstable
api: storage_service: tasks: force_keyspace_cleanup
pi: storage_service: tasks: unify force_keyspace_compaction
Currently, batchlog replay is considered successful even if all batches fail
to be sent (they are replayed later). However, repair requires all batches
to be sent successfully. Currently, if batchlog isn't cleared, the repair never
learns and updates the repair_time. If GC mode is set to "repair", this means
that the tombstones written before the repair_time (minus propagation_delay)
can be GC'd while not all batches were replied.
Consider a scenario:
- Table t has a row with (pk=1, v=0);
- There is an entry in the batchlog that sets (pk=1, v=1) in table t;
- The row with pk=1 is deleted from table t;
- Table t is repaired:
- batchlog reply fails;
- repair_time is updated;
- propagation_delay seconds passes and the tombstone of pk=1 is GC'd;
- batchlog is replayed and (pk=1, v=1) inserted - data resurrection!
Do not update repair_time if sending any batch fails. The data is still repaired.
For tablet repair the repair runs, but at the end the exception is passed
to topology coordinator. Thanks to that the repair_time isn't updated.
The repair request isn't removed as well, due to which the repair will need
to rerun.
Apart from that, a batch is removed from the batchlog if its version is invalid
or unknown. The condition on which we consider a batch too fresh to replay
is updated to consider propagation_delay.
Fixes: https://github.com/scylladb/scylladb/issues/24415
Data resurrection fix; needs backport to all versions
- (cherry picked from commit 502b03dbc6)
- (cherry picked from commit 904183734f)
- (cherry picked from commit 7f20b66eff)
- (cherry picked from commit e1b2180092)
- (cherry picked from commit d436233209)
- (cherry picked from commit 1935268a87)
- (cherry picked from commit 6fc43f27d0)
Parent PR: #26319Closesscylladb/scylladb#26762
* github.com:scylladb/scylladb:
repair: throw if flush failed in get_flush_time
db: fix indentation
test: add reproducer for data resurrection
repair: fail tablet repair if any batch wasn't sent successfully
db/batchlog_manager: fix making decision to skip batch replay
db: repair: throw if replay fails
db/batchlog_manager: delete batch with incorrect or unknown version
db/batchlog_manager: coroutinize replay_all_failed_batches
Replace -1 with 0 for the liveness check operation to avoid triggering digest validation failures. This prevents rare fatal errors when the cluster is recovering and ensures the test does not violate append_seq invariants.
The value -1 was causing invalid digest results in the append_seq structure, leading to assertion failures. This could happen when the sentinel value was the first (or only) element being appended, resulting in a digest that did not match the expected value.
By using 0 instead, we ensure that the digest calculations remain valid and consistent with the expected behavior of the test.
The specific value of the sentinel is not important, as long as it is a valid elem_t that does not violate the invariants of the append_seq structure. In particular, the sentinel value is typically used only when no valid result is received from any server in the current loop iteration, in which case the loop will retry.
Fixes: scylladb/scylladb#27307
Backporting to active branches - this is a test-only fix (low risk) for a flaky test that exists in older branches (thus affects the CI of active branches).
- (cherry picked from commit 3af5183633)
- (cherry picked from commit 4ba3e90f33)
Parent PR: #28010Closesscylladb/scylladb#28037
* https://github.com/scylladb/scylladb:
test/raft: use valid sentinel in liveness check to prevent digest errors
test/raft: improve debugging in randomized_nemesis_test
test/raft: improve reporting in the randomized_nemesis_test digest functions
Replace -1 with 0 for the liveness check operation to avoid triggering
digest validation failures. This prevents rare fatal errors when the
cluster is recovering and ensures the test does not violate append_seq
invariants.
The value -1 was causing invalid digest results in the append_seq
structure, leading to assertion failures. This could happen when the
sentinel value was the first (or only) element being appended, resulting
in a digest that did not match the expected value.
By using 0 instead, we ensure that the digest calculations remain valid
and consistent with the expected behavior of the test.
The specific value of the sentinel is not important, as long as it is
a valid elem_t that does not violate the invariants of the append_seq
structure. In particular, the sentinel value is typically used only
when no valid result is received from any server in the current loop
iteration, in which case the loop will retry.
Fixes: scylladb/scylladb#27307
(cherry picked from commit 4ba3e90f33)
Move the post-condition check before the assertion to ensure it is
always executed first. Before, the wrong value could be passed to the
digest_remove assertion, making the pre-check trigger there instead of
the post-check as expected.
Also, add a check in the append_seq constructor to ensure that the
digest value is valid when creating an append_seq object.
(cherry picked from commit 3af5183633)
The Boost ASSERTs in the digest functions of the randomized_nemesis_test
were not working well inside the state machine digest functions, leading
to unhelpful boost::execution_exception errors that terminated the apply
fiber, and didn't provide any helpful information.
Replaced by explicit checks with on_fatal_internal_error calls that
provide more context about the failure. Also added validation of the
digest value after appending or removing an element, which allows to
determine which operation resulted in causing the wrong value.
This effectively reverts the changes done in https://github.com/scylladb/scylladb/pull/19282,
but adds improved error reporting.
Refs: scylladb/scylladb#27307
Refs: scylladb/scylladb#17030
(cherry picked from commit d60b908a8e)
Fixed a critical bug where
`storage_group::for_each_compaction_group()` was incorrectly marked
`noexcept`, causing `std::terminate` when actions threw exceptions
(e.g., `utils::memory_limit_reached` during memory-constrained reader
creation).
**Changes made:**
1. Removed `noexcept` from `storage_group::for_each_compaction_group()` declaration and implementation
2. Removed `noexcept` from `storage_group::compaction_groups()` overloads (they call for_each_compaction_group)
3. Removed `noexcept` from `storage_group::live_disk_space_used()` and `memtable_count()` (they call compaction_groups())
4. Kept `noexcept` on `storage_group::flush()` - it's a coroutine that automatically captures exceptions and returns them as exceptional futures
5. Removed `noexcept` from `table_load_stats()` functions in base class, table, and storage group managers
**Rationale:**
There's no reason to kill the server if these functions throw. For
coroutines returning futures, `noexcept` is appropriate because
Seastar automatically captures exceptions and returns them as
exceptional futures. For other functions, proper exception handling
allows the system to recover gracefully instead of terminating.
Fixes#27475Closesscylladb/scylladb#27476
* github.com:scylladb/scylladb:
replica: Remove unnecessary noexcept
replica: Remove noexcept from compaction_groups() functions
replica: Remove noexcept from storage_group::for_each_compaction_group
(cherry picked from commit 730eca5dac)
(cherry picked from commit 2153308cef)
Closesscylladb/scylladb#27946
Raft topology goes over all nodes in a 'left' state and triggers 'remove
node' notification in case id/ip mapping is available (meaning the node
left recently), but the problem is that, since the mapping is not removed
immediately, when multiple nodes are removed in succession a notification
for the same node can be sent several times. Fix that by sending
notification only if the node still exists in the peers table. It will
be removed by the first notification and following notification will not
be sent.
Closesscylladb/scylladb#27743
(cherry picked from commit 4a5292e815)
Closesscylladb/scylladb#27912
`test_insert_failure_doesnt_report_success` test in `test/cluster/dtest/audit_test.py`
has an insert statement that is expected to fail. Dtest environment uses
`FlakyRetryPolicy`, which has `max_retries = 5`. 1 initial fail and 5 retry fails
means we expect 6 error audit logs.
The test failed because `create keyspace ks` failed once, then succeeded on retry.
It allowed the test to proceed properly, but the last part of the test that expects
exactly 6 failed queries actually had 7.
The goal of this patch is to make sure there are exactly 6 = 1 + `max_retries` failed
queries, counting only the query expected to fail. If other queries fail with
successful retry, it's fine. If other queries fail without successful retry, the test
will fail, as it should in such situations. They are not related to this expected
failed insert statement.
Fixes#27322Closesscylladb/scylladb#27378
(cherry picked from commit f545ed37bc)
Closesscylladb/scylladb#27580
Commit d3efb3ab6f added streaming session for rebuild, but it set
the session and request submission time. The session should be set when
request starts the execution, so this patch moved it to the correct
place.
Closesscylladb/scylladb#27757
(cherry picked from commit 04976875cc)
Closesscylladb/scylladb#27866
The test test_truncate_during_topology_change tests TRUNCATE TABLE while
bootstrapping a new node. With tablets enabled TRUNCATE is a global
topology operation which needs to serialize with boostrap.
When TRUNCATE TABLE is issued, it first checks if there is an already
queued truncate for the same table. This can happen if a previous
TRUNCATE operation has timed out, and the client retried. The newly
issued truncate will only join the queued one if it is waiting to be
processed, and will fail immediatelly if the TRUNCATE is already being
processed.
In this test, TRUNCATE will be retried after a timeout (1 minute) due to
the default retry policy, and will be retried up to 3 times, while the
bootstrap is delayed by 2 minutes. This means that the test can validate
the result of a truncate which was started after bootstrap was
completed.
Because of the way truncate joins existing truncate operations, we can
also have the following scenario:
- TRUNCATE times out after one minute because the new node is being
bootstrapped
- the client retries the TRUNCATE command which also times out after 1m
- the third attempt is received during TRUNCATE being processed which
fails the test
This patch changes the retry policy of the TRUNCATE operation to
FallthroughRetryPolicy which guarantees that TRUNCATE will not be
retried on timeout. It also increases the timeout of the TRUNCATE from 1
to 4 minutes. This way the test will actually validate the performance
of the TRUNCATE operation which was issued during bootstrap, instead of
the subsequent, retried TRUNCATEs which could have been issued after the
bootstrap was complete.
Fixes: #26347Closesscylladb/scylladb#27245
(cherry picked from commit d883ff2317)
Closesscylladb/scylladb#27506
The test had a sporadic failure due to a broken promise exception.
The issue was in `test_pinger::ping()` which captured the promise by
move into the subscription lambda, causing the promise to be destroyed
when the lambda was destroyed during coroutine unwinding.
Simplify `test_pinger::ping()` by replacing manual abort_source/promise
logic with `seastar::sleep_abortable()`.
This removes the risk of promise lifetime/race issues and makes the code
simpler and more robust.
Fixes: scylladb/scylladb#27136
Backport to active branches: This fixes a CI test issue, so it is
beneficial to backport the fix. As this is a test-only fix, it is a low
risk change.
Closesscylladb/scylladb#27737
(cherry picked from commit 2a75b1374e)
Closesscylladb/scylladb#27782
In several exception handlers, only `raft::request_aborted` was being caught and rethrown, while `seastar::abort_requested_exception` was falling through to the generic catch(...) block. This caused the exception to be incorrectly treated as a failure that triggers rollback, instead of being recognized as an abort signal.
For example, during tablet draining, the error log showed: "tablets draining failed with seastar::abort_requested_exception (abort requested). Aborting the topology operation"
This change adds `seastar::abort_requested_exception` handling alongside `raft::request_aborted` in all places where it was missing. When rethrown, these exceptions propagate up to the main `run()` loop where `handle_topology_coordinator_error()` recognizes them as normal abort signals and allows the coordinator to exit gracefully without triggering unnecessary rollback operations.
Fixes: scylladb/scylladb#27255
No backport: The problem was only seen in tests and not reported in customer tickets, so it's enough to fix it in the main branch.
- (cherry picked from commit 37e3dacf33)
Parent PR: #27314Closesscylladb/scylladb#27662
* https://github.com/scylladb/scylladb:
topology_coordinator: handle seastar::abort_requested_exception alongside raft::request_aborted
topology_coordinator: consistently rethrow `raft::request_aborted` for direct/global commands
In several exception handlers, only raft::request_aborted was being
caught and rethrown, while seastar::abort_requested_exception was
falling through to the generic catch(...) block. This caused the
exception to be incorrectly treated as a failure that triggers
rollback, instead of being recognized as an abort signal.
For example, during tablet draining, the error log showed:
"tablets draining failed with seastar::abort_requested_exception
(abort requested). Aborting the topology operation"
This change adds seastar::abort_requested_exception handling
alongside raft::request_aborted in all places where it was missing.
When rethrown, these exceptions propagate up to the main run() loop
where handle_topology_coordinator_error() recognizes them as normal
abort signals and allows the coordinator to exit gracefully without
triggering unnecessary rollback operations.
Fixes: scylladb/scylladb#27255
(cherry picked from commit 37e3dacf33)
We saw that in large clusters direct failure detector may cause large task queues to be accumulated. The series address this issue and also moves the code into the correct scheduling group.
Fixes https://github.com/scylladb/scylladb/issues/27142
Backport to all version where 60f1053087 was backported to since it should improve performance in large clusters.
- (cherry picked from commit 82f80478b8)
- (cherry picked from commit 6a6bbbf1a6)
- (cherry picked from commit 86dde50c0d)
Parent PR: #27387Closesscylladb/scylladb#27482
* https://github.com/scylladb/scylladb:
direct_failure_detector: run direct failure detector in the gossiper scheduling group
raft: drop invoke_on from the pinger verb handler
direct_failure_detector: pass timeout to direct_fd_ping verb
Currently, _flush_time was stored as a std::optional<gc_clock::time_point>
and std::nullopt indicates that the flush was needed but failed. It's confusing
for the caller and does not work as expected since the _flush_time is initialized
with value (not optional).
Change _flush_time type to gc_clock::time_point. If a flush is needed but failed,
get_flush_time() throws an exception.
This was suppose to be a part of https://github.com/scylladb/scylladb/pull/26319
but it was mistakenly overwritten during rebases.
Refs: https://github.com/scylladb/scylladb/issues/24415.
Closesscylladb/scylladb#26794
(cherry picked from commit e3e81a9a7a)
Add a reproducer to check that the repair_time isn't updated
if the batchlog replay fails.
If repair_time was updated, tombstones could be GC'd before the
batchlog is replayed. The replay could later cause the data
resurrection.
(cherry picked from commit 1935268a87)
If any batch replay failed, we cannot update repair_time as we risk the
data resurrection.
If replay of any batch needs to be retried, run the whole repair but
fail at the very end, so that the repair_time for it won't be updated.
(cherry picked from commit d436233209)
Ensure all direct and global topology commands rethrow the
`raft::request_aborted` exception when aborted, typically due to
leadership changes. This makes abortion explicit to callers, enabling
proper handling such as retries or workflow termination.
This change completes the work started in PR scylladb/scylladb#23962,
covering all remaining cases where the exception was not rethrown.
Fixes: scylladb/scylladb#23589
(cherry picked from commit 943af1ef1c)
Currently, we skip batch replay if less than batch_log_timeout passed
from the moment the batch was written. batch_log_timeout value can
be configured. If it is large, it won't be replayed for a long time.
If the tombstone will be GC'd before the batch is replayed, then we
risk the data resurrection.
To ensure safety we can skip only the batches that won't be GC'd.
In this patch we skip replay of the batches for which:
now() < written_at + min(timeout + propagation_delay)
repair_time is set as a start of batchlog replay, so at the moment
of the check we will have:
repair_time <= now()
So we know that:
repair_time < written_at + propagation_delay
With this condition we are sure that GC won't happen.
(cherry picked from commit e1b2180092)
Return a flag determining whether all the batches were sent successfully in
batchlog_manager::replay_all_failed_batches (batches skipped due to being
too fresh are not counted). Throw in repair_flush_hints_batchlog_handler
if not all batches were replayed, to ensure that repair_time isn't updated.
(cherry picked from commit 7f20b66eff)
batchlog_manager::replay_all_failed_batches skips batches that have
unknown or incorrect version. Next round will process these batches
again.
Such batches will probably be skipped everytime, so there is no point
in keeping them. Even if at some point the version becomes correct,
we should not replay the batch - it might be old and this may lead
to data resurrection.
(cherry picked from commit 904183734f)
When draining the view builder, we abort ongoing operations using the
view builder's abort source, which may cause them to fail with
abort_requested_exception or raft::request_aborted exceptions.
Since these failures are expected during shutdown, reduce the log level
in add_new_view from 'error' to 'debug' for these specific exceptions
while keeping 'error' level for unexpected failures.
Closesscylladb/scylladb#26297
(cherry picked from commit 6bc41926e2)
Closesscylladb/scylladb#27537
When waiting for the condition variable times out
we call on_internal_error, but unfortunately, the backtrace
it generates is obfuscated by
`coroutine_handle<seastar::internal::coroutine_traits_base<void>::promise_type>::resume`.
To make the log more useful, print the error injection name
and the caller's source_location in the timeout error message.
Fixes#27531
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#27532
(cherry picked from commit 5f13880a91)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#27583
This commit removes the now redundant driver pages from
the Scylla DB documentation. Instead, the link to the pages
where we moved the diver information is added.
Also, the links are updated across the ScyllaDB manual.
Redirections are added for all the removed pages.
Fixes https://github.com/scylladb/scylladb/issues/26871Closesscylladb/scylladb#27277
(cherry picked from commit c5580399a8)
Closesscylladb/scylladb#27440
Greatly improves performance of plan making, because we don't consider
candidates in other racks, most of which will fail to be selected due
to replication constraints (no rack overload). Also (but minor)
reduces the overhead of candidate evaluation, as we don't have to
evaluate rack load.
Enabled only for rf_rack_valid_keyspaces because such setups guarantee
that we will not need (because we must not) move tablets across racks,
and we don't need to execute the general algorithm for the whole DC.
Tested with perf-load-balancing, which performs a single scale-out
operation on a cluster which initially has 10 nodes 88 shards each, 2
racks, RF=2, 70 tables, 256 tablets per table. Scale out adds 6 new
nodes (same shard count). Time to reballance the cluster (plan making
only, sum of all iterations, no streaming):
Before: 16 min 25 s
After: 0 min 25 s
Before, plan making cost (single incremental iteration) alternated
between fast (0.1 [s]) and slow (14.1 [s]):
testlog - Rebalance iteration 7 took 14.156 [s]: mig=88, bad=88, first_bad=17741, eval=93874484, skiplist=0, skip: (load=0, rack=17653, node=0)
testlog - Rebalance iteration 8 took 0.143 [s]: mig=88, bad=88, first_bad=88, eval=865407, skiplist=0, skip: (load=0, rack=0, node=0)
The slow run chose min and max nodes in different racks, hence the
fast path failed to find any candidates and we switched to exhaustive
search of candidates in other nodes.
After, all iterations are fast (0.1 [s] per rack, 0.2 [s] per plan-making). The plan is twice as large because it combines the output of two subsequent (pre-patch) plan-making calls.
Fixes#26016
- (cherry picked from commit c9f0a9d0eb)
- (cherry picked from commit 0dcaaa061e)
- (cherry picked from commit 2b03a69065)
Parent PR: #26017Closesscylladb/scylladb#26218
* github.com:scylladb/scylladb:
test: perf: perf-load-balancing: Add parallel-scaleout scenario
test: perf: perf-load-balancing: Convert to tool_app_template
tablets: scheduler: Balance racks separately when rf_rack_valid_keyspaces is true
load_balancer: include dead nodes when calculating rack load
When direct failure detector was introduces the idea was that it will
run on the same connection raft group0 verbs are running, but in
60f1053087 raft verbs were moved to run on the gossiper connection
while DIRECT_FD_PING was left where it was. This patch move it to
gossiper connection as well and fix the pinger code to run in gossiper
scheduling group.
(cherry picked from commit 86dde50c0d)
Currently raft direct pinger verb jumps to shard 0 to check if group0 is
alive before replying. The verb runs relatively often, so it is not very
efficient. The patch distributes group0 liveness information (as it
changes) to all shard instead, so that the handler itself does not need
to jump to shard 0.
(cherry picked from commit 6a6bbbf1a6)
Simulates reblancing on a single scale-out involving simultaneous
addition of multiple nodes per rack.
Default parameters create a cluster with 2 racks, 70 tables, 256
tablets/table, 10 nodes, 88 shards/node.
Adds 6 nodes in parallel (3 per rack).
Current result on my laptop:
testlog - Rebalance took 21.874 [s] after 82 iteration(s)
(cherry picked from commit 2b03a69065)
To support sub-commands for testing different scenarios.
The current scenario is given the name "rolling-add-dec".
(cherry picked from commit 0dcaaa061e)
Greatly improves performance of plan making, because we don't consider
candidates in other racks, most of which will fail to be selected due
to replication constraints (no rack overload). Also (but minor)
reduces the overhead of candidate evaluation, as we don't have to
evaluate rack load.
Enabled only for rf_rack_valid_keyspaces because such setups guarantee
that we will not need (because we must not) move tablets across racks,
and we don't need to execute the general algorithm for the whole DC.
Tested with perf-load-balancing, which performs a single scale-out
operation on a cluster which initially has 10 nodes 88 shards each, 2
racks, RF=2, 70 tables, 256 tablets per table. Scale out adds 6 new
nodes (same shard count). Time to rebalance the cluster (plan making
only, sum of all iterations, no streaming):
Before: 16 min 25 s
After: 0 min 25 s
Before, plan making cost (single incremental iteration) alternated
between fast (0.1 [s]) and slow (14.1 [s]):
Rebalance iteration 7 took 14.156 [s]: mig=88, bad=88, first_bad=17741, eval=93874484, skiplist=0, skip: (load=0, rack=17653, node=0)
Rebalance iteration 8 took 0.143 [s]: mig=88, bad=88, first_bad=88, eval=865407, skiplist=0, skip: (load=0, rack=0, node=0)
The slow run chose min and max nodes in different racks, hence the
fast path failed to find any candidates and we switched to exhaustive
search of candidates in other nodes.
After, all iterations are fast (0.1 [s] per rack, 0.2 [s] per plan-making).
The plan is twice as large because it combines the output of two subsequent (pre-patch)
plan-making calls.
Fixes#26016
(cherry picked from commit c9f0a9d0eb)
Load balancer aims to preserve a balance in rack loads when generating
tablet migrations. However, this balance might get broken when dead nodes
are present. Currently, these nodes aren't include in rack load calculations,
even if they own tablet replicas. As a result, load balancer treats racks
with dead nodes as racks with a lower load, so I generates migrations to these
racks.
This is incorrect, because a dead node might come back alive, which would result
in having multiple tablet replicas on the same rack. It's also inefficient
even if we know that the node won't come back - when it's being replaced or removed.
In that case we know we are going to rebuild the lost tablet replicas
so migrating tablets to this rack just doubles the work. Allowing such migrations
to happen would also require adjustments in the materialized view pairing code
because we'd temporarily allow having multiple tablet replicas on the same rack.
So in this patch we include dead nodes when calculating rack loads in the load
balancer. The dead nodes still aren't treated as potential migration sources or
destinations.
We also add a test which verifies that no migrations are performed by doing a node
replace with a mv workload in parallel. Before the patch, we'd get pairing errors
and after the patch, no pairing errors are detected.
Fixes https://github.com/scylladb/scylladb/issues/24485Closesscylladb/scylladb#26028
Currently direct_fd_ping runs without timeout, but the verb is not
waited forever, the wait is canceled after a timeout, this timeout
simply is not passed to the rpc. It may create a situation where the
rpc callback can runs on a destination but it is no longer waited on.
Change the code to pass timeout to rpc as well and return earlier from
the rpc handler if the timeout is reached by the time the callback is
called. This is backwards compatible since timeout is passed as
optional.
(cherry picked from commit 82f80478b8)
Primary issue with the old method is that each update is a separate
cross-shard call, and all later updates queue behind it. If one of the
shards has high latency for such calls, the queue may accumulate and
system will appear unresponsive for mapping changes on non-zero shards.
This happened in the field when one of the shards was overloaded with
sstables and compaction work, which caused frequent stalls which
delayed polling for ~100ms. A queue of 3k address updates
accumulated, because we update mapping on each change of gossip
states. This made bootstrap impossible because nodes couldn't
learn about the IP mapping for the bootstrapping node and streaming
failed.
To protect against that, use a more efficient method of replication
which requires a single cross-shard call to replicate all prior
updates.
It is also more reliable, if replication fails transiently for some
reason, we don't give up and fail all later updates.
Fixes#26865
- (cherry picked from commit ed8d127457)
- (cherry picked from commit 4a85ea8eb2)
- (cherry picked from commit f83c4ffc68)
Parent PR: #26941Closesscylladb/scylladb#27188
* github.com:scylladb/scylladb:
address_map: Use barrier() to wait for replication
address_map: Use more efficient and reliable replication method
utils: Introduce helper for replicated data structures
utils: add "fatal" version of utils::on_internal_error()
We store the per-shard chunk count in a uint64_t vector
global_offset, and then convert the counts to offsets with
a prefix sum:
```c++
// [1, 2, 3, 0] --> [0, 1, 3, 6]
std::exclusive_scan(global_offset.begin(), global_offset.end(), global_offset.begin(), 0, std::plus());
```
However, std::exclusive_scan takes the accumulator type from the
initial value, 0, which is an int, instead of from the range being
iterated, which is of uint64_t.
As a result, the prefix sum is computed as a 32-bit integer value. If
it exceeds 0x8000'0000, it becomes negative. It is then extended to
64 bits and stored. The result is a huge 64-bit number. Later on
we try to find an sstable with this chunk and fail, crashing on
an assertion.
An example of the failure can be seen here: https://godbolt.org/z/6M8aEbo57
The fix is simple: the initial value is passed as uint64_t instead of int.
Fixes https://github.com/scylladb/scylladb/issues/27417Closesscylladb/scylladb#27418
(cherry picked from commit 9696ee64d0)
More efficient than 100 pings.
There was one ping in test which was done "so this shard notices the
clock advance". It's not necessary, since obsering completed SMP
call implies that local shard sees the clock advancement done within in.
(cherry picked from commit f83c4ffc68)
Primary issue with the old method is that each update is a separate
cross-shard call, and all later updated queue behind it. If one of the
shards has high latency for such calls, the queue may accumulate and
system will appear unresponsive for mapping changes on non-zero shards.
This happened in the field when one of the shards was overloaded with
sstables and compaction work, which caused frequent stalls which
delayed polling for ~100ms. A queue of 3k address updates
accumulated. This made bootstrap impossible, since nodes couldn't
learn about the IP mapping for the bootstrapping node and streaming
failed.
To protect against that, use a more efficient method of replication
which requires a single cross-shard call to replicate all prior
updates.
It is also more reliable, if replication fails transiently for some
reason, we don't give up and fail all later updates.
Fixes#26865Fixes#26835
(cherry picked from commit 4a85ea8eb2)
Key goals:
- efficient (batching updates)
- reliable (no lost updates)
Will be used in data structures maintained on one designed owning
shard and replicated to other shards.
(cherry picked from commit ed8d127457)
utils::on_internal_error() is a wrapper for Seastar's on_internal_error()
which does not require a logger parameter - because it always uses one
logger ("on_internal_error"). Not needing a unique logger is especially
important when using on_internal_error() in a header file, where we
can't define a logger.
Seastar also has a another similar function, on_fatal_internal_error(),
for which we forgot to implement a "utils" version (without a logger
parameter). This patch fixes that oversight.
In the next patch, we need to use on_fatal_internal_error() in a header
file, so the "utils" version will be useful. We will need the fatal
version because we will encounter an unexpected situation during server
destruction, and if we let the regular on_internal_error() just throw
an exception, we'll be left in an undefined state.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
(cherry picked from commit 33476c7b06)
Consider the following scenario:
1. A table has RF=3 and writes use CL=QUORUM
2. One node is down
3. There is a pending tablet migration from the unavailable node
that is reverted
During the revert, there can be a time window where the pending replica
being cleaned up still accepts writes. This leads to write failures,
as only two nodes (out of four) are able to acknowledge writes.
This patch fixes the issue by adding a barrier to the cleanup_target
tablet transition state, ensuring that the coordinator switches back to
the previous replica set before cleanup is triggered.
Fixes https://github.com/scylladb/scylladb/issues/26512
(cherry picked from commit 67f1c6d36c)
The patch prepares the test for additional write workload to be
executed in parallel with node failures. With the original RF=2,
QUORUM is also 2, which causes writes to fail during node outage.
To address it, the third rack with a single node is added and the
replication factor is increased to 3.
(cherry picked from commit 669286b1d6)
Fixes#24346
When reading, we check for each entry and each chunk, if advancing there
will hit EOF of the segment. However, IFF the last chunk being read has
the last entry _exactly_ matching the chunk size, and the chunk ending
at _exactly_ segment size (preset size, typically 32Mb), we did not check
the position, and instead complained about not being able to read.
This has literally _never_ happened in actual commitlog (that was replayed
at least), but has apparently happened more and more in hints replay.
Fix is simple, just check the file position against size when advancing
said position, i.e. when reading (skipping already does).
v2:
* Added unit test
Closesscylladb/scylladb#27236
(cherry picked from commit 59c87025d1)
Closesscylladb/scylladb#27343
The tablet scheduler should not emit conflicting migrations for the same tablet. This was addressed initially in scylladb/scylladb#26038 but the check is missing in the merge colocation plan, so add it there as well.
Without this check, the merge colocation plan could generate a conflicting migration for a tablet that is already scheduled for migration, as the test demonstrates.
This can cause correctness problems, because if the load balancer generates two migrations for a single tablet, both will be written as mutations, and the resulting mutation could contain mixed cells from both migrations.
Fixes scylladb/scylladb#27304
backport to existing releases - this is a bug that can affect correctness
- (cherry picked from commit 97b7c03709)
Parent PR: #27312Closesscylladb/scylladb#27330
* github.com:scylladb/scylladb:
tablet: scheduler: Do not emit conflicting migration in merge colocation
tablet: scheduler: Do not emit conflicting migrations in the plan
The tablet scheduler should not emit conflicting migrations for the same
tablet. This was addressed initially in scylladb/scylladb#26038 but the
check is missing in the merge colocation plan, so add it there as well.
Without this check, the merge colocation plan could generate a
conflicting migration for a tablet that is already scheduled for
migration, as the test demonstrates.
This can cause correctness problems, because if the load balancer
generates two migrations for a single tablet, both will be written as
mutations, and the resulting mutation could contain mixed cells from
both migrations.
Fixesscylladb/scylladb#27304Closesscylladb/scylladb#27312
(cherry picked from commit 97b7c03709)
Plan-making is invoked independently for different DCs (and in the
future, racks) and then plans are merged. It could be that the same
tablets are selected for migration in different DCs. Only one
migration will prevail and be committed to group0, so it's not a
correctness problem. Next cycle will recognize that the tablet is in
transition and will not be selected by plan-maker. But it makes
plan-making less efficient.
It may also surprise consumers of the plan, like we saw in #25912.
So we should make plan-maker be aware of already scheduled transitions
and not consider those tablets as candidates.
Fixes#26038Closesscylladb/scylladb#26048
(cherry picked from commit 981592bca5)
We currently ignore the `_excluded` field in `node::clone()` and the verbose
formatter of `locator::node`. The first one is a bug that can have
unpredictable consequences on the system. The second one can be a minor
inconvenience during debugging.
We fix both places in this PR.
Fixes https://scylladb.atlassian.net/browse/SCYLLADB-72
This PR is a bugfix that should be backported to all supported branches.
- (cherry picked from commit 4160ae94c1)
- (cherry picked from commit 287c9eea65)
Parent PR: #27265Closesscylladb/scylladb#27290
* https://github.com/scylladb/scylladb:
locator/node: include _excluded in verbose formatter
locator/node: preserve _excluded in clone()
Commit 6e4803a750 broke notification about expired erms held for too long since it resets the tracker without calling its destructor (where notification is triggered). Fix the assign operator to call the destructor like it should.
Fixes https://github.com/scylladb/scylladb/issues/27141
- (cherry picked from commit 9f97c376f1)
- (cherry picked from commit 5dcdaa6f66)
Parent PR: #27140Closesscylladb/scylladb#27275
* github.com:scylladb/scylladb:
test: test that expired erm that held for too long triggers notification
token_metadata: fix notification about expiring erm held for to long
We currently ignore the `_excluded` field in `clone()`. Losing
information about exclusion can have unpredictable consequences. One
observed effect (that led to finding this issue) is that the
`/storage_service/nodes/excluded` API endpoint sometimes misses excluded
nodes.
(cherry picked from commit 4160ae94c1)
Commit 6e4803a750 broke notification about expired erms held for too
long since it resets the tracker without calling its destructor (where
notification is triggered). Fix assign operator to call destructor.
(cherry picked from commit 9f97c376f1)
Correct the loop termination logic that previously caused
certain SSTables to be prematurely excluded, resulting in
lost mutations. This change ensures all relevant SSTables
are properly streamed and their mutations preserved.
(cherry picked from commit dedc8bdf71)
Closesscylladb/scylladb#27153Fixes: #26979
Parent PR: #26980
Unfortunatelly the pytest based test cannot be ported back because of changes made to the testing harness and scylla-tools
The prepare scripts uses 'reg' to verify we're not going to
overwrite an existing image. The 'reg' command is not
available in Fedora 43. Use 'skopeo' instead. Skopeo
is part of the podman ecosystem so hopefully will live longer.
Fixes#27178.
Closesscylladb/scylladb#27179
(cherry picked from commit d6ef5967ef)
Closesscylladb/scylladb#27199
Consider the following:
1) single-key read starts, blocks on replica e.g. waiting for memory.
2) the same replica is migrated away
3) single-key read expires, coordinator abandons it, releases erm.
4) migration advances to cleanup stage, barrier doesn't wait on
timed-out read
5) compaction group of the replica is deallocated on cleanup
6) that single-key resumes, but doesn't find sstable set (post cleanup)
7) with abort-on-internal-error turned on, node crashes
It's fine for abandoned (= timed out) reads to fail, since the
coordinator is gone.
For active reads (non timed out), the barrier will wait for them
since their coordinator holds erm.
This solution consists of failing reads which underlying tablet
replica has been cleaned up, by just converting internal error
to plain exception.
Fixes#26229.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#27078
(cherry picked from commit 74ecedfb5c)
Closesscylladb/scylladb#27155
Not waiting for nodes to see each other as alive can cause the driver to
fail the request sent in `wait_for_upgrade_state()`.
scylladb/scylladb#19771 has already replaced concurrent restarts with
`ManagerClient.rolling_restart()`, but it has missed this single place,
probably because we do concurrent starts here.
Fixes#27055Closesscylladb/scylladb#27075
(cherry picked from commit e35ba974ce)
Closesscylladb/scylladb#27109
This series allows an operator to reset 'cleanup needed' flag if he already cleaned up the node, so that automatic cleanup will not do it again. We also change 'nodetool cleanup' back to run cleanup on one node only (and reset 'cleanup needed' flag in the end), but the new '--global' option allows to run cleanup on all nodes that needed it simultaneously.
Fixes https://github.com/scylladb/scylladb/issues/26866
Backport to all supported version since automatic cleanup behaviour as it is now may create unexpected by the operator load during cluster resizing.
- (cherry picked from commit e872f9cb4e)
- (cherry picked from commit 0f0ab11311)
Parent PR: #26868Closesscylladb/scylladb#27093
* github.com:scylladb/scylladb:
cleanup: introduce "nodetool cluster cleanup" command to run cleanup on all dirty nodes in the cluster
cleanup: Add RESTful API to allow reset cleanup needed flag
Refs #26822Fixes#27062
AWS says to treat 503 errors, at least in the case of ec2 metadata query, as backoff-retry (generally, we do _not_ retry on provider level, but delegate this to higher levels). This patch adds special treatment for 503:s (service unavailable) for both ec2 meta and actual endpoint, doing exponential backoff.
Note: we do _not_ retry forever.
Not tested as such, since I don't get any errors when testing (doh!). Should try to set up a mock ec2 meta with injected errors maybe.
- (cherry picked from commit 190e3666cb)
- (cherry picked from commit d22e0acf0b)
Parent PR: #26934Closesscylladb/scylladb#27063
* github.com:scylladb/scylladb:
encryption::kms_host: Add exponential backoff-retry for 503 errors
encryption::kms_host: Include http error code in kms_error
The service level controller relies on `auth::service` to collect
information about roles and the relation between them and the service
levels (those attached to them). Unfortunately, the service level
controller is initialized way earlier than `auth::service` and so we
had to prevent potential invalid queries of user service levels
(cf. 46193f5e79).
Unfortunately, that came at a price: it made the maintenance socket
incompatible with the current implementation of the service level
controller. The maintenance socket starts early, before the
`auth::service` is fully initialized and registered, and is exposed
almost immediately. If the user attempts to connect to Scylla within
this time window, via the maintenance socket, one of the things that
will happen is choosing the right service level for the connection.
Since the `auth::service` is not registered, Scylla with fail an
assertion and crash.
A similar scenario occurs when using maintenance mode. The maintenance
socket is how the user communicates with the database, and we're not
prepared for that either.
To avoid unnecessary crashes, we add new branches if the passed user is
absent or if it corresponds to the anonymous role. Since the role
corresponding to a connection via the maintenance socket is the anonymous
role, that solves the problem.
Some accesses to `auth::service` are not affected and we do not modify
those.
Fixes scylladb/scylladb#26816
Backport: yes. This is a fix of a regression.
- (cherry picked from commit c0f7622d12)
- (cherry picked from commit 222eab45f8)
- (cherry picked from commit 394207fd69)
- (cherry picked from commit b357c8278f)
Parent PR: #26856Closesscylladb/scylladb#27039
* github.com:scylladb/scylladb:
test/cluster/test_maintenance_mode.py: Wait for initialization
test: Disable maintenance mode correctly in test_maintenance_mode.py
test: Fix keyspace in test_maintenance_mode.py
service/qos: Do not crash Scylla if auth_integration absent
When dropping a column from a CDC log table, set the column drop
timestamp several seconds into the future.
If a value is written to a column concurrently with dropping that
column, the value's timestamp may be after the column drop timestamp. If
this value is also flushed to an SSTable, the SSTable would be
corrupted, because it considers the column missing after the drop
timestamp and doesn't allow values for it.
While this issue affects general tables, it especially impacts CDC tables
because this scenario can occur when writing to a table with CDC preimage
enabled while dropping a column from the base table. This happens even if
the base mutation doesn't write to the dropped column, because CDC log
mutations can generate values for a column even if the base mutation doesn't.
For general tables, this issue can be avoided by simply not writing to a
column while dropping it.
We fix this for the more problematic case of CDC log tables by setting
the column drop timestamp several seconds into the future, ensuring that
writes concurrent with column drops are much less likely to have
timestamps greater than the column drop timestamp.
Fixes https://github.com/scylladb/scylladb/issues/26340
the issue affects all previous releases, backport to improve stability
- (cherry picked from commit eefae4cc4e)
- (cherry picked from commit 48298e38ab)
- (cherry picked from commit 039323d889)
- (cherry picked from commit e85051068d)
Parent PR: #26533Closesscylladb/scylladb#27036
* github.com:scylladb/scylladb:
test: test concurrent writes with column drop with cdc preimage
cdc: check if recreating a column too soon
cdc: set column drop timestamp in the future
97ab3f6622 changed "nodetool cleanup" (without arguments) to run
cleanup on all dirty nodes in the cluster. This was somewhat unexpected,
so this patch changes it back to run cleanup on the target node only (and
reset "cleanup needed" flag afterwards) and it adds "nodetool cluster
cleanup" command that runs the cleanup on all dirty nodes in the
cluster.
(cherry picked from commit 0f0ab11311)
Cleaning up a node using per keyspace/table interface does not reset cleanup
needed flag in the topology. The assumption was that running cleanup on
already clean node does nothing and completes quickly. But due to
https://github.com/scylladb/scylladb/issues/12215 (which is closed as
WONTFIX) this is not the case. This patch provides the ability to reset
the flag in the topology if operator cleaned up the node manually
already.
(cherry picked from commit e872f9cb4e)
Load-and-stream is broken when running concurrently to the finalization step of tablet split.
Consider this:
1) split starts
2) split finalization executes barrier and succeed
3) load-and-stream runs now, starts writing sstable (pre-split)
4) split finalization publishes changes to tablet metadata
5) load-and-stream finishes writing sstable
6) sstable cannot be loaded since it spans two tablets
two possible fixes (maybe both):
1) load-and-stream awaits for topology to quiesce
2) perform split compaction on sstable that spans both sibling tablets
This patch implements # 1. By awaiting for topology to quiesce,
we guarantee that load-and-stream only starts when there's no
chance coordinator is handling some topology operation like
split finalization.
Fixes https://github.com/scylladb/scylladb/issues/26455.
- (cherry picked from commit 3abc66da5a)
- (cherry picked from commit 4654cdc6fd)
Parent PR: #26456Closesscylladb/scylladb#26648
* github.com:scylladb/scylladb:
sstables_loader: Don't bypass synchronization with busy topology
test: Add reproducer for l-a-s and split synchronization issue
sstables_loader: Synchronize tablet split and load-and-stream
Refs #26822
AWS says to treat 503 errors, at least in the case of ec2 metadata
query, as backoff-retry (generally, we do _not_ retry on provider
level, but delegate this to higher levels). This patch adds special
treatment for 503:s (service unavailable) for both ec2 meta and
actual endpoint, doing exponential backoff.
Note: we do _not_ retry forever.
Not tested as such, since I don't get any errors when testing
(doh!). Should try to set up a mock ec2 meta with injected errors
maybe.
v2:
* Use utils::exponential_backoff_retry
(cherry picked from commit d22e0acf0b)
This patch fixes 2 issues at one go:
First, Currently sstables::load clears the sharding metadata
(via open_data()), and so scylla-sstable always prints
an empty array for it.
Second, printing token values would generate invalid json
as they are currently printed as binary bytes, and they
should be printed simply as numbers, as we do elsewhere,
for example, for the first and last keys.
Fixes#26982
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#26991
(cherry picked from commit f9ce98384a)
Closesscylladb/scylladb#27037
add a test that writes to a table concurrently with dropping a column,
where the table has CDC enabled with preimage.
the test reproduces issue #26340 where this results in a malformed
sstable.
(cherry picked from commit e85051068d)
When we drop a column from a CDC log table, we set the column drop
timestamp a few seconds into the future. This can cause unexpected
problems if a user tries to recreate a CDC column too soon, before
the drop timestamp has passed.
To prevent this issue, when creating a CDC column we check its
creation timestamp against the existing drop timestamp, if any, and
fail with an informative error if the recreation attempt is too soon.
(cherry picked from commit 039323d889)
When dropping a column from a CDC log table, set the column drop
timestamp several seconds into the future.
If a value is written to a column concurrently with dropping that
column, the value's timestamp may be after the column drop timestamp. If
this value is also flushed to an SSTable, the SSTable would be
corrupted, because it considers the column missing after the drop
timestamp and doesn't allow values for it.
While this issue affects general tables, it especially impacts CDC tables
because this scenario can occur when writing to a table with CDC preimage
enabled while dropping a column from the base table. This happens even if
the base mutation doesn't write to the dropped column, because CDC log
mutations can generate values for a column even if the base mutation doesn't.
For general tables, this issue can be avoided by simply not writing to a
column while dropping it.
We fix this for the more problematic case of CDC log tables by setting
the column drop timestamp several seconds into the future, ensuring that
writes concurrent with column drops are much less likely to have
timestamps greater than the column drop timestamp.
Fixesscylladb/scylladb#26340
(cherry picked from commit 48298e38ab)
If we try to perform queries too early, before the call to
`storage_service::start_maintenance_mode` has finished, we will
fail with the following error:
```
ERROR 2025-11-12 20:32:27,064 [shard 0:sl:d] token_metadata - sorted_tokens is empty in first_token_index!
```
To avoid that, we should wait until initialization is complete.
(cherry picked from commit b357c8278f)
Although setting the value of `maintenance_mode` to the string `"false"`
disables maintenance mode, the testing framework misinterprets the value
and thinks that it's actually enabled. As a result, it might try to
connect to Scylla via the maintenance socket, which we don't want.
(cherry picked from commit 394207fd69)
If the user connects to Scylla via the maintenance socket, it may happen
that `auth_integration` has not been registered in the service level
controller yet. One example is maintenance mode when that will never
happen; another when the connection occurs before Scylla is fully
initialized.
To avoid unnecessary crashes, we add new branches if the passed user is
absent or if it corresponds to the anonymous role. Since the role
corresponding to a connection via the maintenance socket is the anonymous
role, that solves the problem.
In those cases, we completely circumvent any calls to `auth_integration`
and handle them separately. The modified methods are:
* `get_user_scheduling_group`,
* `with_user_service_level`,
* `describe_service_levels`.
For the first two, the new behavior is in line with the previous
implementation of those functions. The last behaves differently now,
but since it's a soft error, crashing the node is not necessary anyway.
We throw an exception instead, whose error message should give the user
a hint of what might be wrong.
The other uses of `auth_integration` within the service level controller
are not problematic:
* `find_effective_service_level`,
* `find_cached_effective_service_level`.
They take the name of a role as their argument. Since the anonymous role
doesn't have a name, it's not possible to call them with it.
Fixesscylladb/scylladb#26816
(cherry picked from commit c0f7622d12)
Currently, all apis that start a compaction have two versions:
synchronous and asynchronous. They share most of the implementation,
but some checks and params have diverged.
Unify the handlers of /storage_service/keyspace_upgrade_sstables/{keyspace}
and /tasks/compaction/keyspace_upgrade_sstables/{keyspace}.
(cherry picked from commit fdd623e6bc)
Currently, all apis that start a compaction have two versions:
synchronous and asynchronous. They share most of the implementation,
but some checks and params have diverged.
Unify the handlers of /storage_service/keyspace_cleanup/{keyspace}
and /tasks/compaction/keyspace_cleanup/{keyspace}.
(cherry picked from commit 044b001bb4)
Currently, all apis that start a compaction have two versions:
synchronous and asynchronous. They share most of the implementation,
but some checks and params have diverged.
Add consider_only_existing_data parameter to /tasks/compaction/keyspace_compaction/{keyspace},
to match the synchronous version of the api (/storage_service/keyspace_compaction/{keyspace}).
Unify the handlers of both apis.
(cherry picked from commit 12dabdec66)
The patch c543059f86 fixed the synchronization issue between tablet
split and load-and-stream. The synchronization worked only with
raft topology, and therefore was disabled with gossip.
To do the check, storage_service::raft_topology_change_enabled()
but the topology kind is only available/set on shard 0, so it caused
the synchronization to be bypassed when load-and-stream runs on
any shard other than 0.
The reason the reproducer didn't catch it is that it was restricted
to single cpu. It will now run with multi cpu and catch the
problem observed.
Fixes#22707
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#26730
(cherry picked from commit 7f34366b9d)
(cherry picked from commit e8a74d0fb3)
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
This patch series re-enables support for speculative retry values `0` and `100`. These values have been supported some time ago, before [schema: fix issue 21825: add validation for PERCENTILE values in speculative_retry configuration. #21879
](https://github.com/scylladb/scylladb/pull/21879). When that PR prevented using invalid `101PERCENTILE` values, valid `100PERCENTILE` and `0PERCENTILE` value were prevented too.
Reproduction steps from [[Bug]: drop schema and all tables after apply speculative_retry = '99.99PERCENTILE' #26369](https://github.com/scylladb/scylladb/issues/26369) are unable to reproduce the issue after the fix. A test is added to make sure the inclusive border values `0` and `100` are supported.
Documentation is updated to give more information to the users. It now states that these border values are inclusive, and also that the precision, with automatic rounding, is 1 decimal digit.
Fixes#26369
This is a bug fix. If at any time a client tries to use value >= 99.5 and < 100, the raft error will happen. Backport is needed. The code which introduced inconsistency is introduced in 2025.2, so no backporting to 2025.1.
- (cherry picked from commit da2ac90bb6)
- (cherry picked from commit 5d1913a502)
- (cherry picked from commit aba4c006ba)
- (cherry picked from commit 85f059c148)
- (cherry picked from commit 7ec9e23ee3)
Parent PR: #26909Closesscylladb/scylladb#27014
* github.com:scylladb/scylladb:
test: cqlpy: add test case for non-numeric PERCENTILE value
schema: speculative_retry: update exception type for sstring ops
docs: cql: ddl.rst: update speculative-retry-options
test: cqlpy: add test for valid speculative_retry values
schema: speculative_retry: allow 0 and 100 PERCENTILE values
cql3: Fix std::bad_cast when deserializing vectors of collections
This PR fixes a bug where attempting to INSERT a vector containing collections (e.g., `vector<set<int>,1>`) would fail. On the client side, this manifested as a `ServerError: std::bad_cast`.
The cause was "type slicing" issue in the reserialize_value function. When retrieving the vector's element type, the result was being assigned by value (using auto) instead of by reference.
This "sliced" the polymorphic abstract_type object, stripping it of its actual derived type information. As a result, a subsequent dynamic_cast would fail, even if the underlying type was correct.
To prevent this entire class of bugs from happening again, I've made the polymorphic base class `abstract_type` explicitly uncopyable.
Fixes: #26704
This fix needs to be backported as these releases are affected: `2025.4` , `2025.3`.
- (cherry picked from commit 960fe3da60)
- (cherry picked from commit 77da4517d2)
Parent PR: #26740Closesscylladb/scylladb#26997
* github.com:scylladb/scylladb:
cql3: Make abstract_type explicitly noncopyable
cql3: Fix std::bad_cast when deserializing vectors of collections
Add test case for non-numeric PERCENTILE value, which raises an error
different to the out-of-range invalid values. Regex in the test
test_invalid_percentile_speculative_retry_values is expanded.
Refs #26369
(cherry picked from commit 7ec9e23ee3)
Change speculative_retry::to_sstring and speculative_retry::from_sstring
to throw exceptions::configuration_exception instead of std::invalid_argument.
These errors can be triggered by CQL, so appropriate CQL exception should be
used.
Reference: https://github.com/scylladb/scylladb/issues/24748#issuecomment-3025213304
Refs #26369
(cherry picked from commit 85f059c148)
Clarify how the value of `XPERCENTILE` is handled:
- Values 0 and 100 are supported
- The percentile value is rounded to the nearest 0.1 (1 decimal place)
Refs #26369
(cherry picked from commit aba4c006ba)
test_valid_percentile_speculative_retry_values is introduced to test that
valid values for speculative_retry are properly accepted.
Some of the values are moved from the
test_invalid_percentile_speculative_retry_values test, because
the previous commit added support for them.
Refs #26369
(cherry picked from commit 5d1913a502)
This patch allows specifying 0 and 100 PERCENTILE values in speculative_retry.
It was possible to specify these values before #21825. #21825 prevented specifying
invalid values, like -1 and 101, but also prevented using 0 and 100.
On top of that, speculative_retry::to_sstring function did rounding when
formatting the string, which introduced inconsistency.
Fixes#26369
(cherry picked from commit da2ac90bb6)
The polymorphic abstract_type class serves as an interface and should not be copied.
To prevent accidental and unsafe copies, make it explicitly uncopyable.
(cherry picked from commit 77da4517d2)
When deserializing a vector whose elements are collections (e.g., set, list),
the operation raises a `std::bad_cast` exception.
This was caused by type slicing due to an incorrect assignment of a
polymorphic type by value instead of by reference. This resulted in a
failed `dynamic_cast` even when the underlying type was correct.
(cherry picked from commit 960fe3da60)
Load-and-stream is broken when running concurrently to the
finalization step of tablet split.
Consider this:
1) split starts
2) split finalization executes barrier and succeed
3) load-and-stream runs now, starts writing sstable (pre-split)
4) split finalization publishes changes to tablet metadata
5) load-and-stream finishes writing sstable
6) sstable cannot be loaded since it spans two tablets
two possible fixes (maybe both):
1) load-and-stream awaits for topology to quiesce
2) perform split compaction on sstable that spans both sibling tablets
This patch implements #1. By awaiting for topology to quiesce,
we guarantee that load-and-stream only starts when there's no
chance coordinator is handling some topology operation like
split finalization.
Fixes#26455.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit 3abc66da5a)
Batches that fail on the initial send are retired later, until they
succeed. These retires happen with CL=ALL, regardless of what the
original CL of the batch was. This is unnecessarily strict. We tried to
follow Cassandra here, but Cassandra has a big caveat in their use of
CL=ALL for batches. They accept saving just a hint for any/all of the
endpoints, so a batch which was just logged in hints is good enough for
them.
We do not plan on replicating this usage of hints at this time, so as a
middle ground, the CL is changed to EACH_QUORUM.
Fixes: scylladb/scylladb#25432Closesscylladb/scylladb#26304
(cherry picked from commit d9c3772e20)
Closesscylladb/scylladb#26929
Fixes: #26440
1. Added description to primary-replica-only option
2. Fixed code text to better reflect the constrained cheked in the code
itself. namely: that both primary replica only and scope must be
applied only if load and steam is applied too, and that they are mutual
exclusive to each other.
Note: when https://github.com/scylladb/scylladb/issues/26584 is
implemented (with #26609) there will be a need to align the docs as
well - namely, primary-replica-only and scope will no longer be
mutual exclusive
Signed-off-by: Ran Regev <ran.regev@scylladb.com>
Closesscylladb/scylladb#26480
(cherry picked from commit aaf53e9c42)
Closesscylladb/scylladb#26905
This is backport of fix for https://github.com/scylladb/scylladb/issues/26040 and related test (https://github.com/scylladb/scylladb/pull/26589) to 2025.3.
Before this change, unauthorized connections stayed in main
scheduling group. It is not ideal, in such case, rather sl:default
should be used, to have a consistent behavior with a scenario
where users is authenticated but there is no service level assigned
to the user.
This commit adds a call to update_scheduling_group at the end of
connection creation for an unauthenticated user, to make sure the
service level is switched to sl:default.
Fixes: https://github.com/scylladb/scylladb/issues/26040
Fixes: https://github.com/scylladb/scylladb/issues/26581
(cherry picked from commit 278019c328)
(cherry picked from commit 8642629e8e)
No backport, as it's already a backport (but similar PRs will be created for 2025.4)
Closesscylladb/scylladb#26814
* github.com:scylladb/scylladb:
test: add test_anonymous_user to test_raft_service_levels
transport: call update_scheduling_group for non-auth connections
The primary goal of this test is to reproduce scylladb/scylladb#26040
so the fix (278019c328) can be backported
to older branches.
Scenario: connect via CQL as an anonymous user and verify that the
`sl:default` scheduling group is used. Before the fix for #26040
`main` scheduling group was incorrectly used instead of `sl:default`.
Control connections may legitimately use `sl:driver`, so the test
accepts those occurrences while still asserting that regular anonymous
queries use `sl:default`.
This adds explicit coverage on master. After scylladb#24411 was
implemented, some other tests started to fail when scylladb#26040
was unfixed. However, none of the tests asserted this exact behavior.
Refs: scylladb/scylladb#26040
Refs: scylladb/scylladb#26581Closesscylladb/scylladb#26589
(cherry picked from commit 8642629e8e)
Before this change, unauthorized connections stayed in `main`
scheduling group. It is not ideal, in such case, rather `sl:default`
should be used, to have a consistent behavior with a scenario
where users is authenticated but there is no service level assigned
to the user.
This commit adds a call to `update_scheduling_group` at the end of
connection creation for an unauthenticated user, to make sure the
service level is switched to `sl:default`.
Fixes: scylladb/scylladb#26040
(cherry picked from commit 278019c328)
ScyllaDB offers the `compression` DDL property for configuring compression per user table (compression algorithm and chunk size). If not specified, the default compression algorithm is the LZ4Compressor with a 4KiB chunk size. The same default applies to system tables as well.
This series introduces a new configuration option to allow customizing the default for user tables. It also adds some tests for the new functionality.
Fixes#25195.
- (cherry picked from commit 1106157756)
- (cherry picked from commit ea41f652c4)
- (cherry picked from commit a7e46974d4)
- (cherry picked from commit e1d9c83406)
- (cherry picked from commit 8d5bd212ca)
- (cherry picked from commit 6ba0fa20ee)
- (cherry picked from commit 8410532fa0)
Parent PR: #26003Closesscylladb/scylladb#26301
* github.com:scylladb/scylladb:
test/cluster: Add tests for invalid SSTable compression options
test/boost: Add tests for SSTable compression config options
main: Validate SSTable compression options from config
db/config: Add SSTable compression options for user tables
db/config: Prepare compression_parameters for config system
compressor: Validate presence of sstable_compression in parameters
compressor: Add missing space in exception message
Sometimes file::list_directory() returns entries without type set. In
thase case lister calls file_type() on the entry name to get it. In case
the call returns disengated type, the code assumes that some error
occurred and resolves into exception.
That's not correct. The file_type() method returns disengated type only
if the file being inspected is missing (i.e. on ENOENT errno). But this
can validly happen if a file is removed bettween readdir and stat. In
that case it's not "some error happened", but a enry should be just
skipped. In "some error happened", then file_type() would resolve into
exceptional future on its own.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26595
(cherry picked from commit d9bfbeda9a)
Closesscylladb/scylladb#26764
It turns out that #21477 wasn't sufficient to fix the issue. The driver
may still decide to reconnect the connection after `rolling_restart`
returns. One possible explanation is that the driver sometimes handles
the DOWN notification after all nodes consider each other UP.
Reconnecting the driver after restarting nodes seems to be a reliable
workaround that many tests use. We also use it here.
Fixes#19959Closesscylladb/scylladb#26638
(cherry picked from commit 5321720853)
Closesscylladb/scylladb#26758
* seastar 26badcb14...4431d974f (1):
> Merge '[Backport 2025.3] all commits required for enabling i7i support' from Robert Bindar
split random io buffer size in 2 options
Fix hang in io_queue for big write ioproperties numbers
Fix incorrect defaults for io queue iops/bandwidth
iotune: fix very long warm up duration on systems with high cpu count
Add iotune --get-best-iops-with-buffer-sizes option
Add sequential buffer size options to IOTune
iotune: Ignore measurements during warmup period
iotune: Fix warmup calculation bug and botched rebase
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26725
We noticed during work on scylladb/seastar#2802 that on i7i family
(later proved that it's valid for i4i family as well),
the disks are reporting the physical sector sizes incorrectly
as 512bytes, whilst we proved we can render much better write IOPS with
4096bytes.
This is not the case on AWS i3en family where the reported 512bytes
physical sector size is also the size we can achieve the best write IOPS.
This patch works around this issue by changing `scylla_io_setup` to parse
the instance type out of `/sys/devices/virtual/dmi/id/product_name`
and run iotune with the correct request size based on the instance type.
Signed-off-by: Robert Bindar <robert.bindar@scylladb.com>
Closesscylladb/scylladb#25315
(cherry picked from commit 2c74a6981b)
Closesscylladb/scylladb#26714
Group0 tombstone GC considers only the current group 0 members
while computing the group 0 tombstone GC time. It's not enough
because in the Raft-based recovery procedure, there can be nodes
that haven't joined the current group 0 yet, but they have belonged
to a different group 0 and thus have a non-empty group 0 state ID.
The current code can cause a data resurrection in group 0 tables.
We fix this issue in this PR and add a regression test.
This issue was uncovered by `test_raft_recovery_entry_loss`, which
became flaky recently. We skipped this test for now. We will unskip
it in a following PR because it's skipped only on master, while we
want to backport this PR.
Fixes#26534
This PR contains an important bugfix, so we should backport it
to all branches with the Raft-based recovery procedure (2025.2
and newer).
- (cherry picked from commit 1d09b9c8d0)
- (cherry picked from commit 6b2e003994)
- (cherry picked from commit c57f097630)
Parent PR: #26612Closesscylladb/scylladb#26680
* https://github.com/scylladb/scylladb:
test: test group0 tombstone GC in the Raft-based recovery procedure
group0_state_id_handler: remove unused group0_server_accessor
group0_state_id_handler: consider state IDs of all non-ignored topology members
Apply two main changes to the s3_client error handling
1. Add a loop to s3_client's `make_request` for the case whe the retry strategy will not help since the request itself have to be updated. For example, authentication token expiration or timestamp on the request header
2. Refine the way we handle exceptions in the `chunked_download_source` background fiber, now we carry the original `exception_ptr` and also we wrap EVERY exception in `filler_exception` to prevent retry strategy trying to retry the request altogether
Fixes: https://github.com/scylladb/scylladb/issues/26483
Should be ported back to 2025.3 and 2025.4 to prevent deadlocks and failures in these versions
- (cherry picked from commit 55fb2223b6)
- (cherry picked from commit db1ca8d011)
- (cherry picked from commit 185d5cd0c6)
- (cherry picked from commit 116823a6bc)
- (cherry picked from commit 43acc0d9b9)
- (cherry picked from commit 58a1cff3db)
- (cherry picked from commit 1d34657b14)
- (cherry picked from commit 4497325cd6)
- (cherry picked from commit fdd0d66f6e)
Parent PR: #26527
This backport diverges from the original PR patch, as the 2025.3 release lacks the
required Seastar changes. Namely, there is no overload for make_request in this
version of the Seastar which accepts const& to the request argument. Thus here it's
handled by removing constness from request arguments when calling http's make_request
Closesscylladb/scylladb#26649
* https://github.com/scylladb/scylladb:
s3_client: tune logging level
s3_client: add logging
s3_client: improve exception handling for chunked downloads
s3_client: fix indentation
s3_client: add max for client level retries
s3_client: remove `s3_retry_strategy`
s3_client: support high-level request retries
s3_client: just reformat `make_request`
s3_client: unify `make_request` implementation
Rewrite wait_for first_completed to return only first completed task guarantee
of awaiting(disappearing) all cancelled and finished tasks
Use wait_for_first_completed to avoid false pass tests in the future and issues
like #26148
Use gather_safely to await tasks and removing warning that coroutine was
not awaited
Closesscylladb/scylladb#26435
(cherry picked from commit 24d17c3ce5)
Closesscylladb/scylladb#26662
It's not enough to consider only the current group 0 members. In the
Raft-based recovery procedure, there can be nodes that haven't joined
the current group 0 yet, but they have belonged to a different group 0
and thus have a non-empty group 0 state ID.
We fix this issue in this commit by considering topology members
instead.
We don't consider ignored nodes as an optimization. When some nodes are
dead, the group 0 state ID handler won't have to wait until all these
nodes leave the cluster. It will only have to wait until all these nodes
are ignored, which happens at the beginning of the first
removenode/replace. As a result, tombstones of group 0 tables will be
purged much sooner.
We don't rename the `group0_members` variable to keep the change
minimal. There seems to be no precise and succinct name for the used set
of nodes anyway.
We use `std::ranges::join_view` in one place because:
- `std::ranges::concat` will become available in C++26,
- `boost::range::join` is not a good option, as there is an ongoing
effort to minimize external dependencies in Scylla.
(cherry picked from commit 1d09b9c8d0)
Change all logging related to errors in `chunked_download_source` background download fiber to `info` to make it visible right away in logs.
(cherry picked from commit fdd0d66f6e)
Refactor the wrapping exception used in `chunked_download_source` to
prevent the retry strategy from reattempting failed requests. The new
implementation preserves the original `exception_ptr`, making the root
cause clearer and easier to diagnose.
(cherry picked from commit 1d34657b14)
To prevent client retrying indefinitely time skew and authentication errors add `max_attempts` to the `client::make_request`
(cherry picked from commit 43acc0d9b9)
It never worked as intended, so the credentials handling is moving to the same place where we handle time skew, since we have to reauthenticate the request
(cherry picked from commit 116823a6bc)
Add an option to retry S3 requests at the highest level, including
reinitializing headers and reauthenticating. This addresses cases
where retrying the same request fails, such as when the S3 server
rejects a timestamp older than 15 minutes.
(cherry picked from commit 185d5cd0c6)
Refactor `make_request` to use a single core implementation that
handles authentication and issues the HTTP request. All overloads now
delegate to this unified method.
(cherry picked from commit 55fb2223b6)
Schema pulls should always be disabled when group 0 is used. However,
`migration_manager::disable_schema_pulls()` is never called during
a restart with `recovery_leader` set in the Raft-based recovery
procedure, which causes schema pulls to be re-enabled on all live nodes
(excluding the nodes replacing the dead nodes). Moreover, schema pulls
remain enabled on each node until the node is restarted, which could
be a very long time.
We fix this issue and add a regression test in this PR.
Fixes#26569
This is an important bug fix, so it should be backported to all branches
with the Raft-based recovery procedure (2025.2 and newer branches).
- (cherry picked from commit ec3a35303d)
- (cherry picked from commit da8748e2b1)
- (cherry picked from commit 71de01cd41)
Parent PR: #26572Closesscylladb/scylladb#26597
* github.com:scylladb/scylladb:
test: test_raft_recovery_entry_loss: fix the typo in the test case name
test: verify that schema pulls are disabled in the Raft-based recovery procedure
raft topology: disable schema pulls in the Raft-based recovery procedure
Complementary to the previous patch. It triggers semantic validation
checks in `compression_parameters::validate()` and expects the server to
exit. The tests examine both command line and YAML options.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit 8410532fa0)
Since patch 03461d6a54, all boost unit tests depending on `cql_test_env`
are compiled into a single executable (`combined_tests`). Add the new
test in there.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit 6ba0fa20ee)
`compression_parameters` provides two levels of validation:
* syntactic checks - implemented in the constructor
* semantic checks - implemented by `compression_parameters::validate()`
The former are applied implicitly when parsing the options from the
command line or from scylla.yaml. The latter are currently not applied,
but they should.
In lack of a better place, apply them in main, right after joining the
cluster, to make sure that the cluster features have been negotiated.
The feature needed here is the `SSTABLE_COMPRESSION_DICTS`. Validation
will fail if the feature is disabled and a dictionary compression
algorithm has been selected.
Also, mark `validate()` as const so that it can be called from a config
object.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit 8d5bd212ca)
ScyllaDB offers the `compression` DDL property for configuring
compression per user table (compression algorithm and chunk size). If
not specified, the default compression algorithm is the LZ4Compressor
with a 4KiB chunk size (refer to the default constructor for
`compression_parameters`). The same default applies to system tables as
well.
Add a new configuration option to allow customizing the default for user
tables. Use the previously hardcoded default as the new option's default
value.
Note that the option has no effect on ALTER TABLE statements. An altered
table either inherits explicit compression options from the CQL
statement, or maintains its existing options.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit e1d9c83406)
SSTable compression is currently configurable only per table, via the
`compression` property in CREATE/ALTER TABLE statements. This is
represented internally via the `compression_parameters` class. We plan
to offer the same options via the configuration as well, to make the
default compression method for user tables configurable.
This patch prepares the ground by making the `compression_parameters`
usable as a `config_file::named_value`, namely:
* Define an extraction operator (required by `boost::program_options`
for parsing the options from command line).
* Define a formatter (required by `named_value::operator()`).
* Define a template specialization for `config_type_for` (required by
`named_value` constructor).
* Define a yaml converter (required for parsing the options from
scylla.yaml).
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit a7e46974d4)
We do this at the end of `test_raft_recovery_entry_loss`. It's not worth
to add a separate regression test, as tests of the recovery procedure
are complicated and have a long running time. Also, we choose
`test_raft_recovery_entry_loss` out of all tests of the recovery
procedure because it does some schema changes.
(cherry picked from commit da8748e2b1)
Schema pulls should always be disabled when group 0 is used. However,
`migration_manager::disable_schema_pulls()` is never called during
a restart with `recovery_leader` set in the Raft-based recovery
procedure, which causes schema pulls to be re-enabled on all live nodes
(excluding the nodes replacing the dead nodes). Moreover, schema pulls
remain enabled on each node until the node is restarted, which could
be a very long time.
The old gossip-based recovery procedure doesn't have this problem
because we disable schema pulls after completing the upgrade-to-group0
procedure, which is a part of the old recovery procedure.
Fixes#26569
(cherry picked from commit ec3a35303d)
Introduce a counter metric to monitor instances where the background
filling fiber is blocked due to insufficient memory in the S3 client.
Closesscylladb/scylladb#26466
(cherry picked from commit 413739824f)
Closesscylladb/scylladb#26553
It turns out that Boost assertions are thread-unsafe,
(and can't be used from multiple threads concurrently).
This causes the test to fail with cryptic log corruptions sometimes.
Fix that by switching to thread-safe checks.
Fixesscylladb/scylladb#24982Closesscylladb/scylladb#26472
(cherry picked from commit 7c6e84e2ec)
Closesscylladb/scylladb#26552
The `describe_multi_item` function treated the last reference-captured
argument as the number of used RCU half units. The caller
`batch_get_item`, however, expected this parameter to hold an item size.
This RCU value was then passed to
`rcu_consumed_capacity_counter::get_half_units`, treating the
already-calculated RCU integer as if it were a size in bytes.
This caused a second conversion that undercounted the true RCU. During
conversion, the number of bytes is divided by `RCU_BLOCK_SIZE_LENGTH`
(=4KB), so the double conversion divided the number of bytes by 16 MB.
The fix removes the second conversion in `describe_multi_item` and
changes the API of `describe_multi_item`.
Fixes: https://github.com/scylladb/scylladb/pull/25847Closesscylladb/scylladb#25842
(cherry picked from commit a55c5e9ec7)
Closesscylladb/scylladb#26538
Using `driver_connect()` after a cluster restart isn't enough to ensure
full CQL availability, but the test assumes that it is.
Fix that by making the test wait for CQL availability via `get_ready_cql()`.
Also, replace some manual usages of wait_for_cql_and_get_hosts with
`get_ready_cql()` too.
Fixesscylladb/scylladb#25362Closesscylladb/scylladb#25366
(cherry picked from commit 85fd4d23fa)
Closesscylladb/scylladb#26514
We were recently surprised (in pull request #25797) to "discover" that
Scylla does not allow granting SELECT permissions on individual
materialized views. Instead, all materialized views of a base table
are readable if the base table is readable.
In this patch we document this fact, and also add a test to verify
that it is indeed true. As usual for cqlpy tests, this test can also
be run on Cassandra - and it passes showing that Cassandra also
implemented it the same way (which isn't surprising, given that we
probably copied our initial implementation from them).
The test demonstrates that neither Scylla nor Cassandra prints an error
when attempting to GRANT permissions on a specific materialized view -
but this GRANT is simply ignored. This is not ideal, but it is the
existing behavior in both and it's not important now to change it.
Additionally, because pull request #25797 made CDC-log permissions behave
the same as materialized views - i.e., you need to make the base table
readable to allow reading from the CDC log, this patch also documents
this fact and adds a test for it also.
Fixes#25800Closesscylladb/scylladb#25827
(cherry picked from commit 3c969e2122)
Closesscylladb/scylladb#26104
pass an appropriate query state for auth queries called from service
level cache reload. we use the function qos_query_state to select a
query_state based on caller context - for internal queries, we set a
very long timeout.
the service level cache reload is called from group0 reload. we want it
to have a long timeout instead of the default 5 seconds for auth
queries, because we don't have strict latency requirement on the one
hand, and on the other hand a timeout exception is undesired in the
group0 reload logic and can break group0 on the node.
Fixes https://github.com/scylladb/scylladb/issues/25290
backport possible to improve stability
- (cherry picked from commit a1161c156f)
- (cherry picked from commit 3c3dd4cf9d)
- (cherry picked from commit ad1a5b7e42)
Parent PR: #26180Closesscylladb/scylladb#26478
* github.com:scylladb/scylladb:
service/qos: set long timeout for auth queries on SL cache update
auth: add query_state parameter to query functions
auth: refactor query_all_directly_granted
In the Raft-based recovery procedure, we create a new group 0 and add
live nodes to it one by one. This means that for some time there are
nodes which belong to the topology, but not to the new group 0. The
voter handler running on the recovery leader incorrectly considers these
nodes while choosing voters.
The consequences:
- misleading logs, for example, "making servers {<ID of a non-member>}
voters", where the non-member won't become a voter anyway,
- increased chance of majority loss during the recovery procedure, for
example, all 3 nodes that first joined the new group 0 are in the same
dc and rack, but only one of them becomes a voter because the voter
handler tries to make non-members in other dcs/racks voters.
Fixes#26321Closesscylladb/scylladb#26327
(cherry picked from commit 67d48a459f)
Closesscylladb/scylladb#26427
pass an appropriate query state for auth queries called from service
level cache reload. we use the function qos_query_state to select a
query_state based on caller context - for internal queries, we set a
very long timeout.
the service level cache reload is called from group0 reload. we want it
to have a long timeout instead of the default 5 seconds for auth
queries, because we don't have strict latency requirement on the one
hand, and on the other hand a timeout exception is undesired in the
group0 reload logic and can break group0 on the node.
Fixesscylladb/scylladb#25290
(cherry picked from commit ad1a5b7e42)
add a query_state parameter to several auth functions that execute
internal queries. currently the queries use the
internal_distributed_query_state() query state, and we maintain this as
default, but we want also to be able to pass a query state from the
caller.
in particular, the auth queries currently use a timeout of 5 seconds,
and we will want to set a different timeout when executed in some
different context.
(cherry picked from commit 3c3dd4cf9d)
rewrite query_all_directly_granted to use execute_internal instead of
query_internal in a style that is more consistent with the rest of the
module.
This will also be useful for a later change because execute_internal
accepts an additional parameter of query_state.
(cherry picked from commit a1161c156f)
Consider this:
1) merge finishes, wakes up fiber to merge compaction groups
2) drop table happens, which in turn invokes truncate underneath
3) merge fiber stops old groups
4) truncate disables compaction on all groups, but the ones stopped
5) truncate performs a check that compaction has been disabled on
all groups, including the ones stopped
6) the check fails because groups being stopped didn't have compaction
explicitly disabled on them
To fix it, the check on step 6 will ignore groups that have been
stopped, since those are not eligible for having compaction explicitly
disabled on them. The compaction check is there, so ongoing compaction
will not propagate data being truncated, but here it happens in the
context of drop table which doesn't leave anything behind. Also, a
group stopped is somewhat equivalent to compaction disabled on it,
since the procedure to stop a group stops all ongoing compaction
and eventually removes its state from compaction manager.
Fixes#25551.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#25563
(cherry picked from commit 149f9d8448)
Closesscylladb/scylladb#25632
Some tools commands have links to online documentation in their help output. These links were left behind in the source-available change, they still point to the old opensource docs. Furthermore, the links in the scylla-sstable help output always point to the latest stable release's documentation, instead of the appropriate one for the branch the tool was built from. Fix both of these.
Fixes: scylladb/scylladb#26320
Broken documentation link fix for the tool help output, needs backport to all live source-available versions.
- (cherry picked from commit 5a69838d06)
- (cherry picked from commit 15a4a9936b)
- (cherry picked from commit fe73c90df9)
Parent PR: #26322Closesscylladb/scylladb#26389
* github.com:scylladb/scylladb:
tools/scylla-sstable: fix doc links
release: adjust doc_link() for the post source-available world
tools/scylla-nodetool: remove trailing " from doc urls
The doc links in scylla-sstable help output are static, so they always
point to the documentation of the latest stable release, not to the
documentation of the release the tool binary is from. On top of that,
the links point to old open-source documentation, which is now EOL.
Fix both problems: point link at the new source-available documentation
pages and make them version aware.
(cherry picked from commit fe73c90df9)
Always set the node ops progress to 100% when the operation finishes,
regardless of success or failure. This ensures the progress never
remains below 100%, which would otherwise indicates a pending node
operation in case of an error.
Fixes#26193Closesscylladb/scylladb#26194
(cherry picked from commit b31e651657)
Closesscylladb/scylladb#26267
Consider the following:
1) balancer emits split decision
2) split compaction starts
3) split decision is revoked
4) emits merge decision
5) completes merge, before compaction in step 2 finishes
After last step, split compaction initiated in step 2 can fail because it works with the global tablet map, rather than the map when the compaction started. With the global state changing under its feet, on merge, the mutation splitting writer will think it's going backwards since sibling tablets are merged.
This problem was also seen when running load-and-stream, where split initiated by the sstable writer failed, split completed, and the unsplit sstable is left in the table dir, causing problems in the restart.
To fix this, let's make split compaction always work with the state when it started, not a global state.
Fixes#24153.
All 2025.* versions are vulnerable, so fix must be backported to them.
- (cherry picked from commit 0c1587473c)
- (cherry picked from commit 68f23d54d8)
Parent PR: #25690Closesscylladb/scylladb#25935
* github.com:scylladb/scylladb:
replica: Fix split compaction when tablet boundaries change
replica: Futurize split_compaction_options()
Catching a live entry in IO queue is very rare event, so we haven't seen it so far, but the `_ticket` member had been removed ~2 years ago and had been replaced with `_capacity` which is plain 64bit integer.
Fixes#26184
The issue is present in 2025.x as well and looks cheap to backport
- (cherry picked from commit 8438c59ad3)
Parent PR: #26185
Also includes backport of #24835 which also applies to 2025.3 and is now crucial.
The scylla_io_queues.ticket() method is renamed by this backport, but without 24835 it will be problematic to fix all callers of it
Closesscylladb/scylladb#26266
* github.com:scylladb/scylladb:
scylla-gdb: Fix fair-queue entry printing
scylla-gdb: Don't show io_queue executing and queued resources
Catching a live entry in IO queue is very rare event, so we haven't seen
it so far, but the `_ticket` member had been removed ~2 years ago and
had been replaced with `_capacity` which is plain 64bit integer.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26185
(cherry picked from commit 8438c59ad3)
These counters are no longer accounted by io-queue code and are always
zero. Even more -- accounting removal happened years ago and we don't
have Scylla versions built with seastar older than that.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#24835
Consider the following:
1) balancer emits split decision
2) split compaction starts
3) split decision is revoked
4) emits merge decision
5) completes merge, before compaction in step 2 finishes
After last step, split compaction initiated in step 2 can fail
because it works with the global tablet map, rather than the
map when the compaction started. With the global state changing
under its feet, on merge, the mutation splitting writer will
think it's going backwards since sibling tablets are merged.
This problem was also seen when running load-and-stream, where
split initiated by the sstable writer failed, split completed,
and the unsplit sstable is left in the table dir, causing
problems in the restart.
To fix this, let's make split compaction always work with
the state when it started, not a global state.
Fixes#24153.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit 68f23d54d8)
SSTable compression parameters should always define an algorithm via the
`sstable_compression` sub-option. Add a check in the constructor to
ensure this is always provided (unless no options are given, which is
interpreted as "no compression").
This change has no user-visible effect, since the same check is already
performed at a higher-level, while validating the CQL properties of
CREATE TABLE and ALTER TABLE statements (see `cf_prop_defs::validate()`).
However, it will become useful in later patches, when compression config
options will be introduced.
Although now redundant, keep the sanity check in
`cf_prop_defs::validate()` to maintain consistency of error messages
with Cassandra.
Note also that Cassandra uses 'class' instead of 'sstable_compression'
since version 3.11.10, but Scylla still doesn't support this, see:
https://github.com/scylladb/scylladb/issues/4200
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit ea41f652c4)
test_two_tablets_concurrent_repair_and_migration_repair_writer_level waits
for the first node that logs info about repair_writer using asyncio.wait.
The done group is never awaited, so we never learn about the error.
The test itself is incorrect and the log about repair_writer is never
printed. We never learn about that and tests finishes successfully
after 10 minutes timeout.
Fix the test:
- disable hinted handoff;
- repair tablets of the whole table:
- new table is added so that concurrent migration is possible;
- use wait_for_first_completed that awaits done group;
- do some cleanups.
Remove nightly mark.
Fixes: #26148.
Closesscylladb/scylladb#26209
(cherry picked from commit 48bbe09c8b)
Closesscylladb/scylladb#26220
Currently, while stopping the compaction_manager, we stop task_manager
compaction module and concurrently run compaction_manager::really_do_stop.
really_do_stop stops and waits for all task_executors that are kept
in compaction_manager::_tasks, but nothing ensures that no more tasks will
be added there. Due to leftover tasks, we trigger on_fatal_internal_error.
Modify the order of compaction_manager::stop. After the change, we stop
compaction tasks in the following order:
- abort module abort source;
- close module gate in the background;
- stop_ongoing_compactions (kept in compaction_manager::_tasks);
- wait until module gate is closed.
Check module abort source before creating compaction executor and
adding it to _tasks.
Thanks to the above, we can be sure that:
- after module::stop there will be no tasks in _tasks;
- compaction_manager::stop aborts all tasks; we don't wait for any whole
compaction to finish.
Fixes: https://github.com/scylladb/scylladb/issues/25806.
Fixes shutdown bug; Needs backports to all version
- (cherry picked from commit 17707d0e6b)
- (cherry picked from commit 97c77d7cd5)
Parent PR: #25885Closesscylladb/scylladb#26224
* github.com:scylladb/scylladb:
compaction: move _tasks check
compaction: stop compaction module in really_do_stop
In compaction_manager::really_do_stop we check whether _tasks list
is empty after the compactions are stopped. However, a new task may
still sneak in, causing the assertion failure. Such a task won't
be there for long - module::make_task will fail as the module is
already stopped.
Move the assertion, that checks if _tasks is empty, after the
compaction_states' gates are closed.
Fixes: #25806.
(cherry picked from commit 97c77d7cd5)
Currently, compaction::task_manager_module is stopped in compaction_manager::stop,
concurrently to really_do_stop. We can't predict the order of the two.
Do not set _task_manager_module to nullptr at stop, because
compaction_manager::really_do_stop() may be called before the actual
shutdown, while other components still try to use it.
compaction::task_manager_module does not keep a pointer to compaction_manager,
so we won't end up with memory leak.
Stop compaction module in really_do_stop, after ongoing compactions
are stopped.
It's a preparation for further patches.
(cherry picked from commit 17707d0e6b)
Consider the following:
The tablet load balancer is working on:
- node1: an empty node (no tablets) with a large disk capacity
- node2: an empty node (no tablets) with a lower disk capacity then node1
- node3: is being decommissioned and contains tablet replicas
In load_balancer::make_internode_plan() the initial destination
node/shard is selected like this:
// Pick best target shard.
auto dst = global_shard_id {target, _load_sketch->get_least_loaded_shard(target)};
load_sketch::get_least_loaded_shard(host_id) calls ensure_node() which
adds the host to load_sketch's internal hash maps in case the node was
not yet seen by load_sketch.
Let's assume dst is a shard on node1.
Later in load_balancer::make_internode_plan() we will call
pick_candidate() to try to find a better destination node than the
initial one:
// May choose a different source shard than src.shard or different destination host/shard than dst.
auto candidate = co_await pick_candidate(nodes, src_node_info, target_info, src, dst, nodes_by_load_dst,
drain_skipped);
auto source_tablets = candidate.tablets;
src = candidate.src;
dst = candidate.dst;
If pick_candidate() selects some other empty destination (due to larger
capacity: node1) node, and that node has not yet been seen by
load_sketch (because it was empty), a subsequent call to
load_sketch::pick() will search for the node using
std::unordered_map::at(), and because the node is not found it will
throw a std::out_of_bounds() exception crashing the load balancer.
This problem is fixed by changing load_sketch::populate() to initialize
its internal maps with all the nodes which populate()'s arguments
filter for.
Fixes: #26203Closesscylladb/scylladb#26207
(cherry picked from commit c6c9c316a7)
Closesscylladb/scylladb#26240
If there are pending mutations in the batchlog for a table that
has been dropped, we'll keep attempting to replay them but with
no success -- `db::no_such_column_family` exceptions will be thrown,
and we'll keep trying again and again.
To prevent that, we drop the batch in that case just like we do
in the case of a non-existing keyspace.
A reproducer test has been included in the commit. It fails without
the changes in `db/batchlog_manager.cc`, and it succeeds with them.
Fixesscylladb/scylladb#24806Closesscylladb/scylladb#26057
(cherry picked from commit 35f7d2aec6)
Closesscylladb/scylladb#26201
`line_to_row` is a test function that converts `syslog` audit log to
the format of `table` audit log so tests can use the same checks
for both types of audit. Because `syslog` audit doesn't have `date`
information, the field was filled with the current date. This behavior
broke the tests running at 23:59:59 because `line_to_row` returned
different results on different days.
Fixes: scylladb/scylladb#25509Closesscylladb/scylladb#26101
(cherry picked from commit 15e71ee083)
Closesscylladb/scylladb#26191
In 789a4a1ce7, we adjusted the test file
to work with the configuration option `rf_rack_valid_keyspaces`. Part of
the commit was making the two tables used in the test replicate in
separate data centers.
Unfortunately, that destroyed the point of the test because the tables
no longer competed for resources. We fix that by enforcing the same
replication factor for both tables.
We still accept different values of replication factor when provided
manually by the user (by `--rf1` and `--rf2` commandline options). Scylla
won't allow for creating RF-rack-invalid keyspaces, but there's no reason
to take away the flexibility the user of the test already has.
Fixesscylladb/scylladb#26026Closesscylladb/scylladb#26115
(cherry picked from commit 0d2560c07f)
Closesscylladb/scylladb#26172
Capacity based balancing was introduced in 2025.1. It computes balance
based on a node's capacity: the number of tablets located on a node
should be directly proportional to that node's storage capacity.
This change adds this explanation to the docs.
Fixes: #25686Closesscylladb/scylladb#25687
(cherry picked from commit de5dab8429)
Closesscylladb/scylladb#26107
compaction/scrub: register sstables for compaction before validation
When `scrub --validate` runs, it collects all candidate sstables at the
start and validates them one by one in separate compaction tasks.
However, scrub in validate mode does not register these sstables for
compaction, which allows regular compaction to pick them up and
potentially compact them away before validation begins. This leads to
scrub failures because the sstables can no longer be found.
This patch fixes the issue by first disabling compaction, collecting the
sstables, and then registering them for compaction before starting
validation. This ensures that the enqueued sstables remain available for
the entire duration of the scrub validation task.
Fixes#23363
This reported scrub failure occurs on all versions that have the
checksum/digest validation feature for uncompressed sstables.
So, backport it to older versions.
- (cherry picked from commit 84f2e99c05)
- (cherry picked from commit 7cdda510ee)
Parent PR: #26034Closesscylladb/scylladb#26099
* github.com:scylladb/scylladb:
compaction/scrub: register sstables for compaction before validation
compaction/scrub: handle exceptions when moving invalid sstables to quarantine
The chunked download source sends large GET requests and then consumes data
as it arrives. Sometimes it can stop reading from socket early and drop the
in-flight data. The existing read-bytes metrics show only the number of
consumed bytes, we we also want to know the number of requested bytes
Refs #25770 (accounting of read-bytes)
Fixes#25876
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#25877
(cherry picked from commit 6fb66b796a)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#26070
All three tests could hit
https://github.com/scylladb/python-driver/issues/295. We use the
standard workaround for this issue: reconnecting the driver after
the rolling restart, and before sending any requests to local tables
(that can fail if the driver closes a connection to the node that
restarted last).
All three tests perform two rolling restarts, but the latter ones
already have the workaround.
Fixes#26005Closesscylladb/scylladb#26056
(cherry picked from commit a56115f77b)
Closesscylladb/scylladb#26199
Currently, it runs in the gossiper scheduling group, because it's
invoked by the topology coordinator. That scheduling group has the
same amount of shares as user workload. Plan-making can take
significant amount of time during rebalancing, and we don't want that
to impact user workload which happens to run on the same shard.
Reduce impact by running in the maintenance scheduling group.
Fixes#26037Closesscylladb/scylladb#26046
(cherry picked from commit ddbcea3e2a)
Closesscylladb/scylladb#26168
In S3 client both read and write metrics have three counters -- number
of requests made, number of bytes processed and request latency. In most
of the cases all three counters are updated at once -- upon response
arrival.
However, in case of chunked download source this way of accounting
metrics is misleading. In this code the request is made once, and then
the obtained bytes are consumed eventually as the data arrive.
Currently, each time a new portion of data is read from the socket the
number of read requests is incremented. That's wrong, the request is
made once, and this counter should also be incremented once, not for
every data buffer that arrived in response.
Same for read request latency -- it's "added" for every data buffer that
arrives, but it's a lenghy process, the _request_ latency should be
accounted once per responce. Maybe later we'll want to have "data
latency" metrics as well, but for what we have now it's request latency.
The number of read bytes is accounted properly, so not touched here.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#25770
(cherry picked from commit 9deea3655f)
Closesscylladb/scylladb#26145
- Move the initialization of log_done inside the try block to catch any
exceptions it may throw.
- Relocate the failure warning log after sink.close() cleanup
to guarantee sink.close() is always called before logging errors.
Refs #25497Closesscylladb/scylladb#25591
(cherry picked from commit b12404ba52)
Closesscylladb/scylladb#25903
In test/alternator/test_returnvalues.py we had tests for the
ReturnValues feature on UpdateItem requests - but we only tested
UpdateItem requests with the "modern" UpdateExpression, and forgot to
test the combination of ReturnValues with the old AttributeUpdates API.
It turns out this combination is buggy: when both ReturnValues=ALL_OLD
and AttributeUpdates need the previous value of the item, we may wrongly
std::move() the value out, and the operation will fail with a strange
error:
An error occurred (ValidationException) when calling the UpdateItem
operation: JSON assert failed on condition 'IsObject()'
The fix in this patch is trivial - just move the std::move() to the
correct place, after both UpdateExpression and AttributeUpdates
handling is done.
This patch also includes a reproducing test, which fails before this
patch and passes with it - and of course passes on DynamoDB. This
test reproduces two cases where the bug happened, as well as one
case where it didn't (to make sure we don't regress in what already
worked).
Fixes#25894
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#25900
(cherry picked from commit 3c0032deb4)
Closesscylladb/scylladb#26096
When `scrub --validate` runs, it collects all candidate sstables at the
start and validates them one by one in separate compaction tasks.
However, scrub in validate mode does not register these sstables for
compaction, which allows regular compaction to pick them up and
potentially compact them away before validation begins. This leads to
scrub failures because the sstables can no longer be found.
This patch fixes the issue by first disabling compaction, collecting the
sstables, and then registering them for compaction before starting
validation. This ensures that the enqueued sstables remain available for
the entire duration of the scrub validation task.
Fixes#23363
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
(cherry picked from commit 7cdda510ee)
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
In validate mode, scrub moves invalid sstables into the quarantine
folder. If validation fails because the sstable files are missing from
disk, there is nothing to move, and the quarantine step will throw an
exception. Handle such exceptions so scrub can return a proper
compaction_result instead of propagating the exception to the caller.
This will help the testcase for #23363 to reliably determine if the
scrub has failed or not.
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
(cherry picked from commit 84f2e99c05)
This patch overrides the antlr3 function that allocates the missing
tokens that would eventually leak. The override stores these tokens in
a vector, ensuring memory is freed whenever the parser is destroyed.
Solution is copied from CQL implementation.
A unit test to reproduce the issue is added - leak would be reported
by ASAN, when running this test in debug mode - the test passed but
the leak is discovered when the test file exits.
Fixes#25878Closesscylladb/scylladb#25930
(cherry picked from commit 776f90e2f8)
Closesscylladb/scylladb#26085
This change disables caching for raft log table due to the following reasons:
* Immediate reason is a deficiency in handling emerging range tombstones in the cache, which causes stalls.
* Long-term reason is that sequential reads from the raft log do not benefit from the cache, making it better to bypass it to free up space and avoid stalls.
Fixesscylladb/scylladb#26027Closesscylladb/scylladb#26031
(cherry picked from commit 2640b288c2)
Closesscylladb/scylladb#26074
Sometimes gossiper operations invoked from storage_service and other components run under a non-gossiper scheduling group. If these operations acquire gossiper locks, priority inversion can occur: higher-priority gossiper tasks may wait behind lower-priority tasks (e.g. streaming), which can cause gossiper slowness or even failures.
This patch ensures that gossiper operations requiring locks on gossiper structures are explicitly executed in the gossiper scheduling group. To help detect similar issues in the future, a warning is logged whenever a gossiper lock is acquired under a non-gossiper scheduling group.
Fixes scylladb/scylladb#25907
Refs: scylladb/scylladb#25702
Backport: this patch fixes an issue with gossiper operations scheduling group, that might affect topology operations, therefore backport is needed to 2025.1, 2025.2, 2025.3
- (cherry picked from commit 340413e797)
- (cherry picked from commit 6c2a145f6c)
Parent PR: #25981Closesscylladb/scylladb#26073
* https://github.com/scylladb/scylladb:
gossiper: ensure gossiper operations are executed in gossiper scheduling group
gossiper: fix wrong gossiper instance used in `force_remove_endpoint`
Sometimes gossiper operations invoked from storage_service and other components
run under a non-gossiper scheduling group. If these operations acquire gossiper
locks, priority inversion can occur: higher-priority gossiper tasks may wait
behind lower-priority tasks (e.g. streaming), which can cause gossiper slowness
or even failures.
This patch ensures that gossiper operations requiring locks on gossiper
structures are explicitly executed in the gossiper scheduling group.
To help detect similar issues in the future, a warning is logged whenever
a gossiper lock is acquired under a non-gossiper scheduling group.
Fixesscylladb/scylladb#25907
(cherry picked from commit 6c2a145f6c)
`gossiper::force_remove_endpoint` is always executed on shard 0 using
`invoke_on`. Since each shard has its own `gossiper` instance, if
`force_remove_endpoint` is called from a shard other than shard 0,
`my_host_id()` may be invoked on the wrong `gossiper` object. This
results in undefined behavior due to unsynchronized access to resources
on another shard.
(cherry picked from commit 340413e797)
The PRUNE MATERIALIZED VIEW statement is supposed to remove ghost rows from the
view. Ghost rows are rows in the view with no corresponding row in the base table.
Before this patch, only rows whose primary key columns of the base table had
different values than any of the base rows were treated as ghost rows by the PRUNE
statement. However, view rows which have a column in their primary key that's not
in the base primary can also be ghost rows if this column has a different value
than the base row with the same values of remaining primary key columns. That's
because these rows won't be deleted unless we change value of this column in the
base table to this specific value.
In this patch we add a check for this column in the PRUNE MATERIALIZED VIEW logic.
If this column isn't the same in the base table and the view, these rows are also
deleted.
Fixes https://github.com/scylladb/scylladb/issues/25655Closesscylladb/scylladb#25720
(cherry picked from commit 1f9be235b8)
Closesscylladb/scylladb#25956
In the Raft-based topology, a decommissioning node is removed from group
0 after the decommission request is considered finished (and the token
ring is updated). Therefore, `check_token_ring_and_group0_consistency`
called just after decommission might fail when the decommissioned node
is still in group 0 (as a non-voter). We deflake all tests that call
`check_token_ring_and_group0_consistency` after decommission in this PR.
Fixes#25809
This PR improves CI stability and changes only tests, so it should be
backported to all supported branches.
- (cherry picked from commit e41fc841cd)
- (cherry picked from commit bb9fb7848a)
Parent PR: #25927Closesscylladb/scylladb#25963
* https://github.com/scylladb/scylladb:
test: cluster: deflake consistency checks after decommission
test: cluster: util: handle group 0 changes after token ring changes in wait_for_token_ring_and_group0_consistency
In the Raft-based topology, a decommissioning node is removed from group
0 after the decommission request is considered finished (and the token
ring is updated). Therefore, `check_token_ring_and_group0_consistency`
called just after decommission might fail when the decommissioned node
is still in group 0 (as a non-voter). We deflake all tests that call
`check_token_ring_and_group0_consistency` after decommission in this
commit.
Fixes#25809
(cherry picked from commit bb9fb7848a)
In the Raft-based topology, a decommissioning node is removed from group
0 after the decommission request is considered finished (and the token
ring is updated). `wait_for_token_ring_and_group0_consistency` doesn't
handle such a case; it only handles cases where the token ring is
updated later. We fix this in this commit.
We rely on the new implementation of
`wait_for_token_ring_and_group0_consistency` in the following commit to
fix flakiness of some tests.
We also update the obsolete docstring in this commit.
(cherry picked from commit e41fc841cd)
We modify the logic to make sure that all of the keyspaces that the test
creates are RF-rack-valid. For that, we distribute the nodes across two
DCs and as many racks as the provided replication factor.
That may have an effect on the load balancing logic, but since this is
a performance test and since tablet load balancing is still taking place,
it should be acceptable.
This commit also finishes work in adjusting perf tests to pass with
the `rf_rack_valid_keyspaces` configuration option enabled. The remaining
tests either don't attempt to create keyspaces or they already create
RF-rack-valid keyspaces.
We don't need to explicitly enable the configuration option. It's already
enabled by default by `cql_test_config`. The reason why we haven't run into
any issue because of that is that performance tests are not part of our CI.
Fixesscylladb/scylladb#25127Closesscylladb/scylladb#25728
(cherry picked from commit 789a4a1ce7)
Closesscylladb/scylladb#25922
The files object is moved before the log when stream finishes. We've
logged the files when the stream starts. Skip it in the end of
streaming.
Fixes#25830Closesscylladb/scylladb#25835
(cherry picked from commit 451e1ec659)
Closesscylladb/scylladb#25891
Consider the following scenario:
- Current replica set is [A, B, C]
- write succeeds on [A, B], and a hint is logged for node C
- before the hint is replayed, D bootstraps and the token migrates from C to D
- hint is replayed to node C while D is pending, but it's too late, since streaming for that token is already done
- C is cleaned up, replayed data is lost, and D has a stale copy until next repair.
In the scenario we effectively fail to send the hint. This scenario is also more likely to happen with tablets,
as it can happen for every tablet migration.
This issue is particularly detrimental to materialized views. View updates use hints by default and a specific
view update may be sent to just one view replica (when a single base replica has a different row state due to
reordering or missed writes). When we lose a hint for such a view update, we can generate a persistent inconsistency
between the base and view - ghost rows can appear due to a lost tombstone and rows may be missing in the view due
to a lost row update. Such inconsistencies can't be fixed neither by repairing the view or the base table.
To handle this, in this patch we add the pending replicas to the list of targets of each hint, even if the original
target is still alive.
This will cause some updates to be redundant. These updates are probably unavoidable for now, but they shouldn't
be too common either. The scenarios for them are:
1. managing to send the hint to the source of a migrating replica before streaming that its token - the write will
arrive on the pending replica anyway in streaming
2. the hint target not being the source of the migration - if we managed to apply the original write of the hint to
the actual source of the migration, the pending replica will get it during streaming
3. sending the same hint to many targets at a similar time - while sending to each target, we'll see the same pending
replica for the hint so we'll send it multiple times
4. possible retries where even though the hint was successfully sent to the main target, we failed to send it to the
pending replica, so we need to retry the entire write
This patch handles both tablet migrations and tablet rebuilds. In the future, for tablet migrations, we can avoid
sending the hint to pending replias if the hint target is not the source fo the migration, which would allow us to
avoid the redundant writes 2 and 3. For rack-aware RF, this will be as simple as checking whether the replicas are
in the same rack.
We also add a test case reproducing the issue.
Co-Authored-By: Raphael S. Carvalho <raphaelsc@scylladb.com>
Fixes https://github.com/scylladb/scylladb/issues/19835Closesscylladb/scylladb#25590
(cherry picked from commit 10b8e1c51c)
Closesscylladb/scylladb#25882
Before the patch, user with CREATE access could create a table with CDC or alter the table enabling CDC, but could not query a SELECT on the CDC table they created.
It was due to the fact, the SELECT permission was checked on the CDC log, and later it's "parent" - the keyspace, but not the base table, on which the user had SELECT permission automatically granted on CREATE.
This patch matches the behavior of querying the CDC log to the one implemented for Materialized Views:
1. No new permissions are granted on CREATE.
2. When querying SELECT, the permissions on base table SELECT are checked.
Fixes: https://github.com/scylladb/scylladb/issues/19798
Fixes: VECTOR-151
- (cherry picked from commit be54346846)
- (cherry picked from commit 5e72d71188)
Parent PR: #25797Closesscylladb/scylladb#25870
* github.com:scylladb/scylladb:
cqlpy/test_permissions: run the reproducer tests for #19798
select_statement: check for access to CDC base table
The memory usage is tracked with the help of a semaphore, so just export
its "consumed" units.
One tricky place here is the need to skip metrics registration for
scylla-sstable tool. The thing is that the tools starts the storage
manager and sstables manager on start and then some of tool's operations
may want to start both managers again (via cql environment) causing
double metrics registration exception.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#25769
(cherry picked from commit b26816f80d)
Closesscylladb/scylladb#25865
Populate the local state during gossiper initialization in start_gossiping, preventing an empty state from being added to _endpoint_state_map and returned in get_endpoint_states responses, that was causing an 'empty host id issue' on the other nodes during nodes restart.
Check for a race condition in do_apply_state_locally In do_apply_state_locally, a race condition can occur if a task is suspended at a preemption point while the node entry is not locked.
During this time, the host may be removed from _endpoint_state_map. When the task resumes, this can lead to inserting an entry with an empty host ID into the map, causing various errors, including a node crash.
This change adds a check after locking the map entry: if a gossip ACK update does not contain a host ID, we verify that an entry with that host ID still exists in the gossiper’s _endpoint_state_map.
Fixes https://github.com/scylladb/scylladb/issues/25831
Fixes https://github.com/scylladb/scylladb/issues/25803
Fixes https://github.com/scylladb/scylladb/issues/25702
Fixes https://github.com/scylladb/scylladb/issues/25621
Ref https://github.com/scylladb/scylla-enterprise/issues/5613
Backport: The issue affects all current releases(2025.x), therefore this PR needs to be backported to all 2025.1-2025.3.
- (cherry picked from commit 28e0f42a83)
- (cherry picked from commit f08df7c9d7)
- (cherry picked from commit 775642ea23)
- (cherry picked from commit b34d543f30)
Parent PR: #25849Closesscylladb/scylladb#25898
* https://github.com/scylladb/scylladb:
gossiper: fix empty initial local node state
gossiper: add test for a race condition in start_gossiping
gossiper: check for a race condition in `do_apply_state_locally`
test/gossiper: add reproducible test for race condition during node decommission
This change removes the addition of an empty state to `_endpoint_state_map`.
Instead, a new state is created locally and then published via replicate,
avoiding the issue of an empty state existing in `_endpoint_state_map`
before the preemption point. Since this resolves the issue tested in
`test_gossiper_empty_self_id_on_shadow_round`, the `xfail` mark has been removed.
Fixes: scylladb/scylladb#25831
(cherry picked from commit b34d543f30)
This change adds a test for a race condition in `start_gossiping` that
can lead to an empty self state sent in `gossip_get_endpoint_states_response`.
Test for scylladb/scylladb#25831
(cherry picked from commit 775642ea23)
In do_apply_state_locally, a race condition can occur if a task is
suspended at a preemption point while the node entry is not locked.
During this time, the host may be removed from _endpoint_state_map.
When the task resumes, this can lead to inserting an entry with an
empty host ID into the map, causing various errors, including a node
crash.
This change
1. adds a check after locking the map entry: if a gossip ACK update
does not contain a host ID, we verify that an entry with that host ID
still exists in the gossiper’s _endpoint_state_map.
2. Removes xfail from the test_gossiper_race test since the issue is now
fixed.
3. Adds exception handling in `do_shadow_round` to skip responses from
nodes that sent an empty host ID.
This re-applies the commit 13392a40d4 that
was reverted in 46aa59fe49, after fixing
the issues that caused the CI to fail.
Fixes: scylladb/scylladb#25702Fixes: scylladb/scylladb#25621
Ref: scylladb/scylla-enterprise#5613
(cherry picked from commit f08df7c9d7)
This change introduces a targeted test that simulates the gossiper race
condition observed during node decommissioning. The test delays gossip
state application and host ID lookup to reliably reproduce the scenario
where `gossiper::get_host_id()` is called on a removed endpoint,
potentially triggering an abort in `apply_new_states`.
There is a specific error injection added to widen the race window, in
order to increase the likelihood of hitting the race condition. The
error injection is designed to delay the application of gossip state
updates, for the specific node that is being decommissioned. This should
then result in the server abort in the gossiper.
This re-applies the commit 5dac4b38fb that
was reverted in dc44fca67c, but modified
to relax the check from "on_internal_error" to a just warning log. The
more strict can be re-introduced later once we are sure that all
remaining problems are resolved and it will not break the CI.
Refs: scylladb/scylladb#25621Fixes: scylladb/scylladb#25721
(cherry picked from commit 28e0f42a83)
Before the patch, user with CREATE access could create a table
with CDC or alter the table enabling CDC, but could not query
a SELECT on the CDC table they created.
It was due to the fact, the SELECT permission was checked on
the CDC log, and later it's "parent" - the keyspace,
but not thebase table, on which the user had SELECT permission
automatically granted on CREATE.
This patch matches the behaviour of querying the CDC log
to the one implemented for Materialized Views:
1. No new permissions are granted on CREATE.
2. When querying SELECT, the permissions on base table
SELECT are checked.
Fixes: #19798
(cherry picked from commit be54346846)
Analysis of customer stalls revealed that the function `detail::hash_with_salt` (invoked by `passwords::check`) often blocks the reactor. Internally, this function uses the external `crypt_r` function to compute password hashes, which is CPU-intensive.
This PR addresses the issue in two ways:
1) `sha-512` is now the only password hashing scheme for new passwords (it was already the common-case).
2) `passwords::check` is moved to a dedicated alien thread.
Regarding point 1: before this change, the following hashing schemes were supported by `identify_best_supported_scheme()`: bcrypt_y, bcrypt_a, SHA-512, SHA-256, and MD5. The reason for this was that the `crypt_r` function used for password hashing comes from an external library (currently `libxcrypt`), and the supported hashing algorithms vary depending on the library in use. However:
- The bcrypt schemes never worked properly because their prefixes lack the required round count (e.g. `$2y$` instead of `$2y$05$`). Moreover, bcrypt is slower than SHA-512, so it not good idea to fix or use it.
- SHA-256 and SHA-512 both belong to the SHA-2 family. Libraries that support one almost always support the other, so it’s very unlikely to find SHA-256 without SHA-512.
- MD5 is no longer considered secure for password hashing.
Regarding point 2: the `passwords::check` call now runs on a shared alien thread created at database startup. An `std::mutex` synchronizes that thread with the shards. In theory this could introduce a frequent lock contention, but in practice each shard handles only a few hundred new connections per second—even during storms. There is already `_conns_cpu_concurrency_semaphore` in `generic_server` limits the number of concurrent connection handlers.
Fixes https://github.com/scylladb/scylladb/issues/24524
Backport not needed, as it is a new feature.
Closesscylladb/scylladb#24924
* github.com:scylladb/scylladb:
main: utils: add thread names to alien workers
auth: move passwords::check call to alien thread
test: wait for 3 clients with given username in test_service_level_api
auth: refactor password checking in password_authenticator
auth: make SHA-512 the only password hashing scheme for new passwords
auth: whitespace change in identify_best_supported_scheme()
auth: require scheme as parameter for `generate_salt`
auth: check password hashing scheme support on authenticator start
(cherry picked from commit c762425ea7)
Fixes#25683
Once a table drop is complete, there should be no reason to retain
truncation records for it, as any replay should skip mutations
anyway (no CF), and iff we somehow resurrect a dropped table,
this replay-resurrected data is the least problem anyway.
Adds a prune phase to the startup drop_truncation_rp_records run,
which ignores updating, and instead deletes records for non-existant
tables (which should patch any existing servers with lingering data
as well).
Also does an explicit delete of records on actual table DROP, to
ensure we don't grow this table more than needed even in long
uptime nodes.
Small unit test included.
Closesscylladb/scylladb#25699
(cherry picked from commit bc20861afb)
Closesscylladb/scylladb#25815
Consider the following scenario:
- A tablet is migrated away from a shard
- The tablet cleanup stage closes the storage group's async_gate
- A drop table runs truncate which attempts to disable compaction on the tablet with its gate closed. This fails, because table::parallel_foreach_compaction_group() ultimately calls storage_group_manager::parallel_foreach_storage_group() which will not disable compaction if it can't hold the storage group's gate
- Truncate calls table::discard_sstables() which checks if the compaction has been disabled, and because it hasn't, it then runs on_internal_error() with "compaction not disabled on table ks.cf during TRUNCATE" which causes a crash
Fixes: #25706
This needs to be backported to all supported versions with tablets
- (cherry picked from commit a0934cf80d)
- (cherry picked from commit 1b8a44af75)
Parent PR: #25708Closesscylladb/scylladb#25785
* github.com:scylladb/scylladb:
test: reproducer and test for drop with concurrent cleanup
truncate: check for closed storage group's gate in discard_sstables
Currently, run will execute twice pytest without modifying the path of the
JUnit XML report. This leads that the second execution of the pytest
will override the report. This PR fixing this issue so both reports will
be stored.
Closesscylladb/scylladb#25726
(cherry picked from commit e55c8a9936)
Closesscylladb/scylladb#25778
This patch fixes an error-path bug in the base-64 decoding code in
utils/base64.cc, which among other things is used in Alternator to decode
blobs in JSON requests.
The base-64 decoding code has a lookup table, which was wrongly sized 255
bytes, but needed to be 256 bytes. This meant that if the byte 255 (0xFF)
was included in an invalid base-64 string, instead of detecting that this
is an invalid byte (since the only valid bytes in a base-64 string are
A-Z,a-z,0-9,+,/ and =), the code would either think it's valid with a
nonsense 6-bit part, or even crash on an out-of-bounds read.
Besides the trivial fix, this patch also includes a reproducing test,
which tries to write a blob as a supposedly base-64 encoded string with
a 0xFF byte in it. The test fails before this patch (the write succeeds,
unexpectedly), and passes after this patch (the write fails as
expected). The test also passes on DynamoDB.
Fixes#25701
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#25705
(cherry picked from commit ff91027eac)
Closesscylladb/scylladb#25767
Move management over effective service levels from `service_level_controller`
to a new dedicated type -- `auth_integration`.
Before these changes, it was possible for the service level controller to try
to access `auth::service` after it was deinitialized. For instance, it could
happen when reloading the cache. That HAS happened as described in the following
issue: scylladb/scylladb#24792.
Although the problem might have been mitigated or even resolved in
scylladb/scylladb@10214e13bd, it's not clear
how the service will be used in the future. It's best to prevent similar bugs
than trying to fix them later on.
The logic responsible for preventing to access an uninitialized `auth::service`
was also either non-existent, complex, or non-sufficient.
To prevent accessing `auth::service` by the service level controller, we extract
the relevant portion of the code to a separate entity -- `auth_integration`.
It's an internal helper type whose sole purpose is to manage effective service
levels.
Thanks to that, we were able to nest the lifetime of `auth_integration` within
the lifetime of `auth::service`. It's now impossible to attempt to dereference
it while it's uninitialized.
If a bug related to an invalid access is spotted again, though, it might also
be easier to debug it now.
There should be no visible change to the users of the interface of the service
level controller. We strived to make the patch minimal, and the only affected
part of the logic should be related to how `auth::service` is accessed.
The relevant portion of the initialization and deinitialization flow:
(a) Before the changes:
1. Initialize `service_level_controller`. Pass a reference to an uninitialized
`auth::service` to it.
2. Initialize other services.
3. Initialize and start `auth::service`.
4. (work)
5. Stop and deinitialize `auth::service`.
6. Deinitialize other services.
7. Deinitialize `service_level_controller`.
(b) After the changes:
1. Initialize `service_level_controller`. Pass a reference to an uninitialized
`auth::service` to it. (*)
2. Initialize other services.
3. Initialize and start `auth::service`.
4. Initialize `auth_integration`. Register it in `service_level_controller`.
5. (work)
6. Unregister `auth_integration` in `service_level_controller` and deinitialize
it.
7. Stop and deinitialize `auth::service`.
8. Deinitialize other services.
9. Deinitialize `service_level_controller`.
(*):
The reference to `auth::service` in `service_level_controller` is still
necessary. We need to access the service when dropping a distributed
service level.
Although it would be best to cut that link between the service level
controller and `auth::service` too, effectively separating the entities,
it would require more work, so we leave it as-is for now.
It shouldn't prove problematic as far as accessing an uninitialized service
goes. Trying to drop a service level at the point when we're de-initializing
auth should be impossible.
For more context, see the function `drop_distributed_service_level` in
`service_level_controller`.
A trivial test has been included in the PR. Although its value is questionable
as we only try to reload the service level cache at a specific moment, it's
probably the best we can deliver to provide a reproducer of the issue this patch
is resolving.
Fixesscylladb/scylladb#24792
Backport: The impact of the bug was minimal as it only affected the shutdown.
However, since CI is failing because of it, let's backport the change to all
supported versions.
- (cherry picked from commit 7d0086b093)
- (cherry picked from commit 34afb6cdd9)
- (cherry picked from commit e929279d74)
- (cherry picked from commit dd5a35dc67)
- (cherry picked from commit fc1c41536c)
Parent PR: #25478Closesscylladb/scylladb#25753
* github.com:scylladb/scylladb:
service/qos: Move effective SL cache to auth_integration
service/qos: Add auth::service to auth_integration
service/qos: Reload effective SL cache conditionally
service/qos: Add gate to auth_integration
service/qos: Introduce auth_integration
Before these changes, the logs in hinted handoff often didn't provide
crucial information like the identifier of the node that hints were
being sent to. Also, some of the logs were misleading and referred to
other places in the code than the one where an exception or some other
situation really occurred.
We modify those logs, extending them by more valuable information
and fixing existing issues. What's more, all of the logs in
`hint_endpoint_manager` and `hint_sender` follow a consistent format
now:
```
<class_name>[<destination host ID>]:<function_name>: <message>
```
This way, we should always have AT LEAST the basic information.
Fixes scylladb/scylladb#25466
Backport:
There is no risk in backporting these changes. They only have
impact on the logs. On the other hand, they might prove helpful
when debugging an issue in hinted handoff.
- (cherry picked from commit 2327d4dfa3)
- (cherry picked from commit d7bc9edc6c)
- (cherry picked from commit 6f1fb7cfb5)
Parent PR: #25470Closesscylladb/scylladb#25538
* github.com:scylladb/scylladb:
db/hints: Add new logs
db/hints: Adjust log levels
db/hints: Improve logs
This PR implements solution proposed in scylladb/scylladb#24481
Instead of terminating connections immediately, the shutdown now proceeds in two stages: first closing the receive (input) side to stop new requests, then waiting for all active requests to complete before fully closing the connections.
The updated shutdown process is as follows:
1. Initial Shutdown Phase
* Close the accept gate to block new incoming connections.
* Abort all accept() calls.
* For all active connections:
* Close only the input side of the connection to prevent new requests.
* Keep the output side open to allow responses to be sent.
2. Drain Phase
* Wait for all in-progress requests to either complete or fail.
3. Final Shutdown Phase
* Fully close all connections.
Fixes scylladb/scylladb#24481
- (cherry picked from commit 122e940872)
- (cherry picked from commit 3848d10a8d)
- (cherry picked from commit 3610cf0bfd)
- (cherry picked from commit 27b3d5b415)
- (cherry picked from commit 061089389c)
- (cherry picked from commit 7334bf36a4)
- (cherry picked from commit ea311be12b)
- (cherry picked from commit 4f63e1df58)
Parent PR: #24499Closesscylladb/scylladb#25519
* github.com:scylladb/scylladb:
test: Set `request_timeout_on_shutdown_in_seconds` to `request_timeout_in_ms`, decrease request timeout.
generic_server: Two-step connection shutdown.
transport: consmetic change, remove extra blanks.
transport: Handle sleep aborted exception in sleep_until_timeout_passes
generic_server: replace empty destructor with `= default`
generic_server: refactor connection::shutdown to use `shutdown_input` and `shutdown_output`
generic_server: add `shutdown_input` and `shutdown_output` functions to `connection` class.
test: Add test for query execution during CQL server shutdown
This change introduces a targeted test that simulates the gossiper race
condition observed during node decommissioning. The test delays gossip
state application and host ID lookup to reliably reproduce the scenario
where `gossiper::get_host_id()` is called on a removed endpoint,
potentially triggering an abort in `apply_new_states`.
There is a specific error injection added to widen the race window, in
order to increase the likelihood of hitting the race condition. The
error injection is designed to delay the application of gossip state
updates, for the specific node that is being decommissioned. This should
then result in the server abort in the gossiper.
Refs: scylladb/scylladb#25621Fixes: scylladb/scylladb#25721
Backport: The test is primarily for an issue found in 2025.1, so it
needs to be backported to all the 2025.x branches.
Closesscylladb/scylladb#25685
(cherry picked from commit 5dac4b38fb)
Closesscylladb/scylladb#25781
Consider the following scenario:
- A tablet is migrated away from a shard
- The tablet cleanup stage closes the storage group's async_gate
- A drop table runs truncate which attempts to disable compaction on the
tablet with its gate closed. This fails, because
table::parallel_foreach_compaction_group() ultimately calls
storage_group_manager::parallel_foreach_storage_group() which will not
disable compaction if it can't hold the storage group's gate
- Truncate calls table::discard_sstables() which checks if the compaction
has been disabled, and because it hasn't, it then runs
on_internal_error() with "compaction not disabled on table ks.cf during
TRUNCATE" which causes a crash
This patch makes dicard_sstables check if the storage group's gate is
closed whend checking for disabled compaction.
(cherry picked from commit a0934cf80d)
The gossiper can call `storage_service::on_change` frequently (see scylladb/scylla-enterprise#5613), which may cause high CPU load and even trigger OOMs or related issues.
This PR adds a temporary cache for `system.peers` to resolve host_id -> ip without hitting storage on every call. The cache is short-lived to handle the unlikely case where `system.peers` is updated directly via CQL.
This is a temporary fix; a more thorough solution is tracked in https://github.com/scylladb/scylladb/issues/25620.
Fixes scylladb/scylladb#25660
backport: this patch needs to be backported to all supported versions (2025.1/2/3).
- (cherry picked from commit 91c633371e)
- (cherry picked from commit de5dc4c362)
- (cherry picked from commit 4b907c7711)
Parent PR: #25658Closesscylladb/scylladb#25766
* github.com:scylladb/scylladb:
storage_service: move get_host_id_to_ip_map to system_keyspace
system_keyspace: use peers cache in get_ip_from_peers_table
storage_service: move get_ip_from_peers_table to system_keyspace
Users with single-column partition keys that contain colon characters
were unable to use certain REST APIs and 'nodetool' commands, because the
API split key by colon regardless of the partition key schema.
Affected commands:
- 'nodetool getendpoints'
- 'nodetool getsstables'
Affected endpoints:
- '/column_family/sstables/by_key'
- '/storage_service/natural_endpoints'
Refs: #16596 - This does not fully fix the issue, as users with compound
keys will face the issue if any column of the partition key contains
a colon character.
Closesscylladb/scylladb#24829Closesscylladb/scylladb#25565
Reimplemented the function to use the peers cache. It could be replaced
with get_ip_from_peers_table, but that would create a coroutine frame for
each call.
(cherry picked from commit 4b907c7711)
The storage_service::on_change method can be called quite often
by the gossiper, see scylladb/scylla-enterprise#5613. In this commit
we introduce a temporal cache for system.peers so that we don't have
to go to the storage each time we need to resolve host_id -> ip.
We keep the cache only for a small amount of time to handle the
(unlikely) scenario when the user wants to update system.peers table
from CQL.
Fixesscylladb/scylladb#25660
(cherry picked from commit de5dc4c362)
We plan to add a cache to get_ip_from_peers_table in upcoming commits.
It's more convenient to do this from system_keyspace, since the only two
methods that mutate system.peers (remove_endpoint and update_peers_info)
are already there.
(cherry picked from commit 91c633371e)
Fixes#25682
Refs scylla-enterprise#5580
If the truncation table is large in entries, we might create a
huge parallel execution, quite possibly consuming loads of resources
doing something quite trivial.
Limit concurrency to a small-ish number
Closesscylladb/scylladb#25678
(cherry picked from commit 2eccd17e70)
Closesscylladb/scylladb#25751
Previously, `maybe_reconnect_to_preferred_ip()` retrieved the host ID
using `gossiper::get_host_id()`. Since the host ID is already available
in the calling function, we now pass it directly as a parameter.
This change simplifies the code and eliminates a potential race condition
where `gossiper::get_host_id()` could fail, as described in scylladb/scylladb#25621.
Refs: scylladb/scylladb#25621Fixes: scylladb/scylladb#25715
Backport: Recommended for 2025.x release branches to avoid potential issues
from unnecessary calls to `gossiper::get_host_id()` in subscribers.
(cherry picked from commit cfc87746b6)
Closesscylladb/scylladb#25718
Although RF-rack-valid keyspaces are not universally enforced
yet (they're governed by the configuration option
`rf_rack_valid_keyspaces`), we'd like to encourage the user to
abide by the restriction.
To that end, we're introducing a warning when creating or
altering a keyspace. If the configuration option is disabled,
but the user is trying to create an RF-rack-invalid keyspace,
they'll receive a warning.
If the option is turned off, we will also log all of the
RF-rack-invalid keyspaces at start-up.
We provide validation tests.
Fixes scylladb/scylladb#23330
Backport: we'd like to encourage the user to abide by the restriction
even when they don't enforce it to make it easier in the future to
adjust the schema when there's no way to disable it anymore. Because
of that, we'd like to backport it to all relevant versions, starting with 2025.1.
- (cherry picked from commit 60ea22d887)
- (cherry picked from commit af8a3dd17b)
- (cherry picked from commit 837d267cbf)
Parent PR: #24785Closesscylladb/scylladb#25635
* github.com:scylladb/scylladb:
main: Log RF-rack-invalid keyspaces at startup
cql3/statements: Fix indentation
cql3: Warn when creating RF-rack-invalid keyspace
We're providing additional information in error messages when throwing
an exception related to data corruption: when a segment is truncated
and when it's content is invalid. That might prove helpful when debugging.
Closesscylladb/scylladb#25190
(cherry picked from commit 408b45fa7e)
Closesscylladb/scylladb#25461
To avoid situation that port is occupied on localhost, use unique
hostname for Minio
(cherry picked from commit c6c3e9f492)
Closesscylladb/scylladb#24775
Several parameters that `test.py` should pass to pytest->boost were missing. This PR adds handling these parameters: `--random-seed` and `--x-log2-compaction-groups`
Since this code affected with this issue in 2025.3 and this is only framework change, backport for that version needed.
Fixes: https://github.com/scylladb/scylladb/issues/24927
- (cherry picked from commit 71b875c932)
- (cherry picked from commit f7c7877ba6)
Parent PR: #24928Closesscylladb/scylladb#25035
* github.com:scylladb/scylladb:
test.py: add bypassing x_log2_compaction_groups to boost tests
test.py: add bypassing random seed to boost tests
Fixes#25709
If we have large allocations, spanning more than one segment, and
the internal segment references from lead to secondary are the
only thing keeping a segment alive, the implicit drop in
discard_unused_segments and orphan_all can cause a recursive call
to discard_unused_segments, which in turn can lead to vector
corruption/crash, or even double free of segment (iterator confusion).
Need to separate the modification of the vector (_segments) from
actual releasing of objects. Using temporaries is the easiest
solution.
To further reduce recursion, we can also do an early clear of
segment dependencies in callbacks from segment release (cf release).
Closesscylladb/scylladb#25719
(cherry picked from commit cc9eb321a1)
Closesscylladb/scylladb#25756
Since `auth_integration` manages effective service levels, let's move
the relevant cache from `service_level_controller` to it.
(cherry picked from commit fc1c41536c)
The new service, `auth_integration`, has taken over the responsibility
over managing effective service levels from `service_level_controller`.
However, before these changes, it still accessed `auth::service` via
the service level controller. Let's change that.
Note that we also remove a check that `auth::service` has been
initialized. It's not necessary anymore because the lifetime of
`auth_integration` is strictly nested within the lifetime of `auth::service`.
In actuality, `service_level_controller` should lose its reference to
`auth::service` completely. All of the management over effective service
levels has already been moved to `auth_integration`. However, the
referernce is still needed when dropping a distributed service level
because we need to update the corresponding attribute for relevant
roles.
That should not lead to invalid accesses, though. Dropping a service level
should not be possible when `auth::service` is not initialized.
(cherry picked from commit dd5a35dc67)
Since `service_level_controller` outlives `auth_integration`, it may
happen that we try to access it when it has already been deinitialized.
To prevent that, we only try to reload or clear the effective service
level cache when the object is still alive.
These changes solve an existing problem with an invalid memory access.
For more context, see issue scylladb/scylladb#24792.
We provide a reproducer test that consistently fails before these
changes but passes after them.
Fixesscylladb/scylladb#24792
(cherry picked from commit e929279d74)
We add a named gate to `auth_integration` that will aid us in synchronizing
ongoing tasks with stopping the service.
(cherry picked from commit 34afb6cdd9)
We introduce a new type, `auth_integration`, that will be used internally
by `service_level_controller`. Its purpose is to take over the responsibility
over managing effective service levels.
The main problem of the current implementation of service level controller
is its dependency on `auth::service` whose lifetime is strictly nested
within the lifetime of service level controller. That may and already have
led to invalid memory accesses; for an example, see issue
scylladb/scylladb#24792.
Our strategy is to split service level controller into smaller parts and
ensure that we access `auth::service` only when it's valid to do so.
This commit is the first step towards that.
We don't change anything in the logic yet, just add the new type. Further
adjustments will be made in following commits.
(cherry picked from commit 7d0086b093)
When the configuration option `rf_rack_valid_keyspaces` is enabled and there
is an RF-rack-invalid keyspace, starting a node fails. However, when the
configuration option is disabled, but there still is a keyspace that violates
the condition, we'd like Scylla to print a warning informing the user about
the fact. That's what happens in this commit.
We provide a validation test.
(cherry picked from commit 837d267cbf)
Although RF-rack-valid keyspaces are not universally enforced
yet (they're governed by the configuration option
`rf_rack_valid_keyspaces`), we'd like to encourage the user to
abide by the restriction.
To that end, we're introducing a warning when creating or
altering a keyspace. If the configuration option is disabled,
but the user is trying to create an RF-rack-invalid keyspace,
they'll receive a warning.
We provide a validation test.
(cherry picked from commit 60ea22d887)
The test test_tombstone_gc_disabled_on_pending_replica was added when
we fixed (#20788) the potential problem with data resurrection during
file based streaming. The issue was occurring only in Enterprise, but
we added the fix in OSS to limit code divergence. This test was added
together with the fix in OSS with the idea to guard this change in OSS.
The real reproducer and test for this fix was added later, after the
fix was ported into Enterprise.
It is in: test/cluster/test_resurrection.py
Since Enterprise has been merged into OSS, there is no more need to
keep the test test_tombstone_gc_disabled_on_pending_replica. Also,
it is flaky with very low probability of failure, making it difficult
to investigate the cause of failure.
Fixes: #22182
Refs: scylladb/scylladb#25448Closesscylladb/scylladb#25134
(cherry picked from commit 7ce96345bf)
Closesscylladb/scylladb#25573
The PR fixes a test flakiness issue in test_mv_backlog related to reading metrics.
The first commit fixes a more general issue in the ScyllaMetrics helper class where it doesn't return the value of all matching lines when a specific shard is requested, but it breaks after the first match.
The second commit fixes a test issue where it expects exactly one write to be throttled, not taking into account other internal writes that may be executed during this time.
Fixes https://github.com/scylladb/scylladb/issues/23139
backport to improve CI stability - test only change
- (cherry picked from commit 5c28cffdb4)
- (cherry picked from commit 276a09ac6e)
Parent PR: #25279Closesscylladb/scylladb#25475
* github.com:scylladb/scylladb:
test: test_mv_backlog: fix to consider internal writes
test/pylib/rest_client: fix ScyllaMetrics filtering
The test creates all driver sessions by itself. As a consequence, all
sessions use the default request timeout of 10s. This can be too low for
the debug mode, as observed in scylladb/scylla-enterprise#5601.
In this commit, we change the test to use `cluster_con`, so that the
sessions have the request timeout set to 200s from now on.
Fixesscylladb/scylla-enterprise#5601
This commit changes only the test and is a CI stability improvement,
so it should be backported all the way to 2024.2. 2024.1 doesn't have
this test.
Closesscylladb/scylladb#25510
(cherry picked from commit 03cc34e3a0)
Closesscylladb/scylladb#25547
We're adding new logs in just a few places that may however prove
important when debugging issues in hinted handoff in the future.
(cherry picked from commit 6f1fb7cfb5)
Some of the logs could be clogging Scylla's logs, so we demote their
level to a lower one.
On the other hand, some of the logs would most likely not do that,
and they could be useful when debugging -- we promote them to debug
level.
(cherry picked from commit d7bc9edc6c)
Before these changes, the logs in hinted handoff often didn't provide
crucial information like the identifier of the node that hints were
being sent to. Also, some of the logs were misleading and referred to
other places in the code than the one where an exception or some other
situation really occurred.
We modify those logs, extending them by more valuable information
and fixing existing issues. What's more, all of the logs in
`hint_endpoint_manager` and `hint_sender` follow a consistent format
now:
```
<class_name>[<destination host ID>]:<function_name>: <message>
```
This way, we should always have AT LEAST the basic information.
(cherry picked from commit 2327d4dfa3)
decrease request timeout.
In debug mode, queries may sometimes take longer than the default 30 seconds.
To address this, the timeout value `request_timeout_on_shutdown_in_seconds`
during tests is aligned with other request timeouts.
Change request timeout for tests from 180s to 90s since we must keep the request
timeout during shutdown significantly lower than the graceful shutdown timeout(2m),
or else a request timeout would cause a graceful shutdown timeout and fail a test.
(cherry picked from commit 4f63e1df58)
When shutting down in `generic_server`, connections are now closed in two steps.
First, only the RX (receive) side is shut down. Then, after all ongoing requests
are completed, or a timeout happened the connections are fully closed.
Fixesscylladb/scylladb#24481
(cherry picked from commit ea311be12b)
The test_base_partition_deletion_with_metrics test case (and the batch
variant) uses the metric of view updates done during its runtime to check
if we didn't perform too many of them. The test runs in the cqlpy suite,
which runs all test cases sequentially on one Scylla instance. Because
of this, if another test case starts a process which generates view
updates and doesn't wait for it to finish before it exists, we may
observe too many view updates in test_base_partition_deletion_with_metrics
and fail the test.
In all test cases we make sure that all tables that were created
during the test are dropped at the end. However, that doesn't
stop the view building process immediately, so the issue can happen
even if we drop the view. I confirmed it by adding a test just before
test_base_partition_deletion_with_metrics which builds a big
materialized view and drops it at the end - the metrics check still failed.
The issue could be caused by any of the existing test cases where we create
a view and don't wait for it to be built. Note that even if we start adding
rows after creating the view, some of them may still be included in the view
building, as the view building process is started asynchronously. In such
a scenario, the view building also doesn't cause any issues with the data in
these tests - writes performed after view creation generate view updates
synchronously when they're local (and we're running a single Scylla server),
the corresponding view udpates generated during view building are redundant.
Because we have many test cases which could be causing this issue, instead
of waiting for the view building to finish in every single one of them, we
move the susceptible test cases to be run on separate Scylla instances, in
the "cluster" suite. There, no other test cases will influence the results.
Fixes https://github.com/scylladb/scylladb/issues/20379Closesscylladb/scylladb#25209
(cherry picked from commit 2ece08ba43)
Closesscylladb/scylladb#25504
RAFT_TEST_CASE macro creates 2 test cases, one with random 20% packet
loss named name_drops. The framework makes hard coded assumptions about
leader which doesn't hold well in case of packet losses.
This short term fix disables the packet drop variant of the specified test.
It should be safe to re-enable it once the whole framework is re-worked to
remove these hard coded assumptions.
This PR fixes a bug. Hence we need to backport it.
Fixes: scylladb/scylladb#23816Closesscylladb/scylladb#25489
(cherry picked from commit a0ee5e4b85)
Closesscylladb/scylladb#25528
In PR #23156, a new function `sleep_until_timeout_passes` was introduced
to wait until a read request times out or completes. However, the function
did not handle cases where the sleep is aborted via _abort_source, which
could result in WARN messages like "Exceptional future is ignored" during
shutdown.
This change adds proper handling for that exception, eliminating the warning.
(cherry picked from commit 061089389c)
This change improves logging and modifies the behavior to attempt closing
the output side of a connection even if an error occurs while closing the input side.
(cherry picked from commit 3610cf0bfd)
`connection` class.
The functions are just wrappers for _fd.shutdown_input() and _fd.shutdown_output(), with added error reporting.
Needed by later changes.
(cherry picked from commit 3848d10a8d)
This test simulates a scenario where a query is being executed while
the query coordinator begins shutting down the CQL server and client
connections. The shutdown process should wait until the query execution
is either completed or timed out.
Test for scylladb/scylladb#24481
(cherry picked from commit 122e940872)
The test executes a single write, fetching metrics before and after the
write, and expects the total throttled writes count to be increased
exactly by one.
However, other internal writes (compaction for example) may be executed
during this time and be throttled, causing the metrics to be increased
by more than expected.
To address this, we filter the metrics by the scheduling group label of
the user write, to filter out the compaction writes that run in the
compaction scheduling group.
Fixesscylladb/scylladb#23139
(cherry picked from commit 276a09ac6e)
In the ScyllaMetrics `get` function, when requesting the value for a
specific shard, it is expected to return the sum of all values of
metrics for that shard that match the labels.
However, it would return the value of the first matching line it finds
instead of summing all matching lines.
For example, if we have two lines for one shard like:
some_metric{scheduling_group_name="compaction",shard="0"} 1
some_metric{scheduling_group_name="sl:default",shard="0"} 2
The result of this call would be 1 instead of 3:
get('some_metric', shard="0")
We fix this to sum all matching lines.
The filtering of lines by labels is fixed to allow specifying only some
of the labels. Previously, for the line to match the filter, either the
filter needs to be empty, or all the labels in the metric line had to be
specified in the filter parameter and match its value, which is
unexpected, and breaks when more labels are added.
We also simplify the function signature and the implementation - instead
of having the shard as a separate parameter, it can be specified as a
label, like any other label.
(cherry picked from commit 5c28cffdb4)
This instruction adds additional safety. The faster we notice that
a node didn't restart properly, the better.
The old gossip-based recovery procedure had a similar recommendation
to verify that each restarting node entered `RECOVERY` mode.
Fixes#25375
This is a documentation improvement. We should backport it to all
branches with the new recovery procedure, so 2025.2 and 2025.3.
Closesscylladb/scylladb#25376
(cherry picked from commit 7b77c6cc4a)
Closesscylladb/scylladb#25440
* Fix discovery of application default credentials by using fully expanded pathnames (no tildes).
* Fix grant type in token request with user credentials.
Fixes#25345.
- (cherry picked from commit 77cc6a7bad)
- (cherry picked from commit b1d5a67018)
Parent PR: #25351Closesscylladb/scylladb#25407
* github.com:scylladb/scylladb:
encryption: gcp: Fix the grant type for user credentials
encryption: gcp: Expand tilde in pathnames for credentials file
Previous way of execution repeat was to launch pytest for each repeat.
That was resource consuming, since each time pytest was doing discovery
of the tests. Now all repeats are done inside one pytest process.
Backport for 2025.3 is needed, since this functionality is framework only, and 2025.3 affected with this slow repeats as well.
Fixes: https://github.com/scylladb/scylladb/issues/25391
- (cherry picked from commit cc75197efd)
- (cherry picked from commit 557293995b)
- (cherry picked from commit 853bdec3ec)
- (cherry picked from commit d0e4045103)
Parent PR: #25073Closesscylladb/scylladb#25392
* github.com:scylladb/scylladb:
test.py: add repeats in pytest
test.py: add directories and filename to the log files
test.py: rename log sink file for boost tests
test.py: better error handling in boost facade
This patch sets, for alternator test suite, all 'alternator-*' loggers and 'paxos' logger to trace level. This should significantly ease debugging of failed tests, while it has no effect on test time and increases log size only by 7%.
This affects running alternator tests only with `test.py`, not with `test/alternator/run`.
Closes#24645Closesscylladb/scylladb#25327
(cherry picked from commit eb11485969)
Closesscylladb/scylladb#25383
Audit tests are vulnerable to noise from LOGIN queries (because AUTH
audit logs can appear at any time). Most tests already use the
`filter_out_noise` mechanism to remove this noise, but tests
focused on AUTH verification did not, leading to sporadic failures.
This change adds a filter to ignore AUTH logs generated by the default
"cassandra" user, so tests only verify logs from the user created
specifically for each test.
Additionally, this PR:
- Adds missing `nonlocal new_rows` statement that prevented some checks from being called
- Adds a testcase for audit logs of `cassandra` user
Fixes: https://github.com/scylladb/scylladb/issues/25069
Better backport those test changes to 2025.3. 2025.2 and earlier don't have `./cluster/dtest/audit_test.py`.
- (cherry picked from commit e634a2cb4f)
- (cherry picked from commit daf1c58e21)
- (cherry picked from commit aef6474537)
- (cherry picked from commit 21aedeeafb)
Parent PR: #25111Closesscylladb/scylladb#25140
* github.com:scylladb/scylladb:
test: audit: add cassandra user test case
test: audit: ignore cassandra user audit logs in AUTH tests
test: audit: change names of `filter_out_noise` parameters
Previous way of executin repeat was to launch pytest for each repeat.
That was resource consuming, since each time pytest was doing discovery
of the tests. Now all repeats are done inside one pytest process.
(cherry picked from commit d0e4045103)
The GCP host searches for application default credentials in known
locations within the user's home directory using
`seastar::file_exists()`. However, this function does not perform tilde
expansion in pathnames.
Replace tildes with the home directory from the HOME environment
variable.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit 77cc6a7bad)
Currently, only test function name used for output and log files. For better
clarity adding the relative path from the test directory of the file name
without extension to these files.
Before:
test_aggregate_avg.1.log
test_aggregate_avg_stdout.1.log
After:
boost.aggregate_fcts_test.test_aggregate_avg.1.log
boost.aggregate_fcts_test.test_aggregate_avg_stdout.3.log
(cherry picked from commit 853bdec3ec)
If test was not executed for some reason, for example not known parameter passed to the test, but boost framework was able to finish correctly, log file will have data but it will be parsed to an empty list. This will raise an exception in pytest execution, rather than produce test output. This change will handle this situation.
(cherry picked from commit cc75197efd)
TRUNCATE TABLE performs a memtable flush and then discards the sstables of the table being truncated. It collects the highest replay position for both of these. When the highest replay position of the discarded sstables is higher than the highest replay position of the flushed memtable, that means that we have had writes during truncate which have been flushed to disk independently of the truncate process. We check for this and trigger an on_internal_error() which throws an exception, informing the user that writing data concurrently with TRUNCATE TABLE is not advised.
The problem with this is that truncate is also called from DROP KEYSPACE and DROP TABLE. These are raft operations and exceptions thrown by them are caught by the (...) exception handler in the raft applier fiber, which then exits leaving the node without the ability to execute subsequent raft commands.
This commit changes the on_internal_error() into a warning log entry. It also outputs to keyspace/table names, and the offending replay positions which caused the check to fail.
This PR also adds a test which validates that TRUNCATE works correctly with concurrent writes. More specifically, it checks that:
- all data written before TRUNCATE starts is deleted
- none of the data after TRUNCATE completes is deleted
Fixes: #25173Fixes: #25013
Backport is needed in versions which check for truncate with concurrent writes using `on_internal_error()`: 2025.3 2025.2 2025.1
- (cherry picked from commit 268ec72dc9)
- (cherry picked from commit 33488ba943)
Parent PR: #25174Closesscylladb/scylladb#25350
* github.com:scylladb/scylladb:
truncate: add test for truncate with concurrent writes
truncate: change check for write during truncate into a log warning
Audit tests use the `filter_out_noise` function to remove noise from
audit logs generated by user authentication. As a result, none of the
existing tests covered audit logs for the default `cassandra` user.
This change adds a test case for that user.
Refs: scylladb/scylladb#25069
(cherry picked from commit 21aedeeafb)
The following steps are performed in sequence as part of the
Raft-based recovery procedure:
- set `recovery_leader` to the host ID of the recovery leader in
`scylla.yaml` on all live nodes,
- send the `SIGHUP` signal to all Scylla processes to reload the config,
- perform a rolling restart (with the recovery leader being restarted
first).
These steps are not intuitive and more complicated than they could be.
In this PR, we simplify these steps. From now on, we will be able to
simply set `recovery_leader` on each node just before restarting it.
Apart from making necessary changes in the code, we also update all
tests of the Raft-based recovery procedure and the user-facing
documentation.
Fixes scylladb/scylladb#25015
The Raft-based procedure was added in 2025.2. This PR makes the
procedure simpler and less error-prone, so it should be backported
to 2025.2 and 2025.3.
- (cherry picked from commit ec69028907)
- (cherry picked from commit 445a15ff45)
- (cherry picked from commit 23f59483b6)
- (cherry picked from commit ba5b5c7d2f)
- (cherry picked from commit 9e45e1159b)
- (cherry picked from commit f408d1fa4f)
Parent PR: #25032Closesscylladb/scylladb#25335
* https://github.com/scylladb/scylladb:
docs: document the option to set recovery_leader later
test: delay setting recovery_leader in the recovery procedure tests
gossip: add recovery_leader to gossip_digest_syn
db: system_keyspace: peers_table_read_fixup: remove rows with null host_id
db/config, gms/gossiper: change recovery_leader to UUID
db/config, utils: allow using UUID as a config option
`kmip_test_helper()` is a utility function to spawn a dedicated PyKMIP
server for a particular Boost test case. The function runs the server as
an external process and uses a thread to parse the port from the
server's logs. The thread communicates the port to the main thread via
a promise.
The current implementation has a bug where the thread may set a value
to the promise after its destruction, causing a segfault. This happens
when the server does not start within 20 seconds, in which case the port
future throws and the stack unwinding machinery destroys the port
promise before the thread that writes to it.
Fix the bug by declaring the promise before the cleanup action.
The bug has been encountered in CI runs on slow machines, where the
PyKMIP server takes too long to create its internal tables (due to slow
fdatasync calls from SQLite). This patch does not improve CI stability -
it only ensures that the error condition is properly reflected in the
test output.
This patch is not a backport. The same bug has been fixed in master as
part of a larger rewrite of the `kmip_test_helper()` (see 722e2bce96).
Refs #24747, #24842.
Fixes#24574.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Closesscylladb/scylladb#25030
This PR introduces a refinement in how credential renewal is triggered. Previously, the system attempted to renew credentials one hour before their expiration, but the credentials provider did not recognize them as expired—resulting in a no-op renewal that returned existing credentials. This led the timer fiber to immediately retry renewal, causing a renewal storm.
To resolve this, we remove expiration (or any other checks) in `reload` method, assuming that whoever calls this method knows what he does.
Fixes: https://github.com/scylladb/scylladb/issues/25044
Should be backported to 2025.3 since we need this fix for the restore
- (cherry picked from commit 68855c90ca)
- (cherry picked from commit e4ebe6a309)
- (cherry picked from commit 837475ec6f)
Parent PR: #24961Closesscylladb/scylladb#25347
* github.com:scylladb/scylladb:
s3_creds: code cleanup
s3_creds: Make `reload` unconditional
s3_creds: Add test exposing credentials renewal issue
Parent task keeps a vector of statuses (task_essentials) of its finished
children. When the children number is large - for example because we
have many tables and a child task is created for each table - we may hit
oversize allocation while adding a new child essentials to the vector.
Keep task_essentails of children in chunked_vector.
Fixes: #25040.
Closesscylladb/scylladb#25064
(cherry picked from commit b5026edf49)
Closesscylladb/scylladb#25319
Currently the service levels cache is unnecessarily updated in every
call of `topology_state_load()`.
But it is enough to reload it only when a snapshot is loaded.
(The cache is also already updated when there is a change to one of
`service_levels_v2`, `role_members`, `role_attributes` tables.)
Fixesscylladb/scylladb#25114Fixesscylladb/scylladb#23065Closesscylladb/scylladb#25116
(cherry picked from commit 10214e13bd)
Closesscylladb/scylladb#25305
Documentation had outdated information how to run C++ test.
Additionally, some information added about gathered test metrics.
Closesscylladb/scylladb#25180
(cherry picked from commit a6a3d119e8)
Closesscylladb/scylladb#25291
We're enabling the configuration option `rf_rack_valid_keyspaces`
in all Python test suites. All relevant tests have been adjusted
to work with it enabled.
That encompasses the following suites:
* alternator,
* broadcast_tables,
* cluster (already enabled in scylladb/scylladb@ee96f8dcfc),
* cql,
* cqlpy (already enabled in scylladb/scylladb@be0877ce69),
* nodetool,
* rest_api.
Two remaining suites that use tests written in Python, redis and scylla_gdb,
are not affected, at least not directly.
The redis suite requires creating an instance of Scylla manually, and the tests
don't do anything that could violate the restriction.
The scylla_gdb suite focuses on testing the capabilities of scylla-gdb.py, but
even then it reuses the `run` file from the cqlpy suite.
Fixesscylladb/scylladb#25126Closesscylladb/scylladb#24617
(cherry picked from commit b41151ff1a)
Closesscylladb/scylladb#25231
Otherwise, tablet rebuilt will be delayed for up to 60s, as the tablet
scheduler needs load stats for the new node (replacing) to make
decisisons.
Fixes#25163Closesscylladb/scylladb#25181
(cherry picked from commit 55116ee660)
Closesscylladb/scylladb#25216
test_validate_truncate_with_concurrent_writes checks if truncate deletes
all the data written before the truncate starts, and does not delete any
data after truncate completes.
(cherry picked from commit 33488ba943)
TRUNCATE TABLE performs a memtable flush and then discards the sstables
of the table being truncated. It collects the highest replay position
for both of these. When the highest replay position of the discarded
sstables is higher than the highest replay position of the flushed
memtable, that means that we have had writes during truncate which have
been flushed to disk independently of the truncate process. We check for
this and trigger an on_internal_error() which throws an exception,
informing the user that writing data concurrently with TRUNCATE TABLE is
not advised.
The problem with this is that truncate is also called from DROP KEYSPACE
and DROP TABLE. These are raft operations and exceptions thrown by them
are caught by the (...) exception handler in the raft applier fiber,
which then exits leaving the node without the ability to execute
subsequent raft commands.
This commit changes the on_internal_error() into a warning log entry. It
also outputs to keyspace/table names, the truncated_at timepoint, the
offending replay positions which caused the check to fail.
Fixes: #25173Fixes: #25013
(cherry picked from commit 268ec72dc9)
Assume that any caller invoking `reload` intends to refresh credentials.
Remove conditional logic that checks for expiration before reloading.
(cherry picked from commit e4ebe6a309)
Add a test demonstrating that renewing credentials does not update
their expiration. After requesting credentials again, the expiration
remains unchanged, indicating no actual update occurred.
(cherry picked from commit 68855c90ca)
Currently, in repair_service::repair_tablets a shard that initiates
the repair keeps repair_tablet_metas of all tablets that have a replica
on this node (on any shard). This may lead to oversized allocations.
Modify tablet_repair_task_impl to repair only the tablets which replicas
are kept on this shard. Modify repair_service::repair_tablets to gather
repair_tablet_metas only on local shard. repair_tablets is invoked on
all shards.
Add a new legacy_tablet_repair_task_impl that covers tablet repair started with
async_repair. A user can use sequence number of this task to manage the repair
using storage_service API.
In a test that reproduced this, we have seen 11136 tablets and 5636096 bytes
allocation failure. If we had a node with 250 shards, 100 tablets each, we could
reach 12MB kept on one shard for the whole repair time.
Fixes: https://github.com/scylladb/scylladb/issues/23632
Needs backport to all live branches as they are all vulnerable to such crashes.
Closesscylladb/scylladb#24194
* github.com:scylladb/scylladb:
repair: distribute tablet_repair_task_meta among shards
repair: do not keep erm in tablet_repair_task_meta
`protocol_exception` is thrown in several places. This has become a performance issue, especially when starting/restarting a server. To alleviate this issue, throwing the exception has to be replaced with returning it as a result or an exceptional future.
This PR replaces throws in the `transport/server` module. This is achieved by using result_with_exception, and in some places, where suitable, just by creating and returning an exceptional future.
There are four commits in this PR. The first commit introduces tests in `test/cqlpy`. The second commit refactors transport server `handle_error` to not rethrow exceptions. The third commit refactors reusable buffer writer callbacks. The fourth commit replaces throwing `protocol_exception` to returning it.
Based on the comments on an issue linked in https://github.com/scylladb/scylladb/issues/24567, the main culprit from the side of protocol exceptions is the invalid protocol version one, so I tested that exception for performance.
In order to see if there is a measurable difference, a modified version of `test_protocol_version_mismatch` Python is used, with 100'000 runs across 10 processes (not threads, to avoid Python GIL). One test run consisted of 1 warm-up run and 5 measured runs. First test run has been executed on the current code, with throwing protocol exceptions. Second test urn has been executed on the new code, with returning protocol exceptions. The performance report is in https://github.com/scylladb/scylladb/pull/24738#issuecomment-3051611069. It shows ~10% gains in real, user, and sys time for this test.
Testing
Build: `release`
Test file: `test/cqlpy/test_protocol_exceptions.py`
Test name: `test_protocol_version_mismatch` (modified for mass connection requests)
Test arguments:
```
max_attempts=100'000
num_parallel=10
```
Throwing `protocol_exception` results:
```
real=1:26.97 user=10:00.27 sys=2:34.55 cpu=867%
real=1:26.95 user=9:57.10 sys=2:32.50 cpu=862%
real=1:26.93 user=9:56.54 sys=2:35.59 cpu=865%
real=1:26.96 user=9:54.95 sys=2:32.33 cpu=859%
real=1:26.96 user=9:53.39 sys=2:33.58 cpu=859%
real=1:26.95 user=9:56.85 sys=2:34.11 cpu=862% # average
```
Returning `protocol_exception` as `result_with_exception` or an exceptional future:
```
real=1:18.46 user=9:12.21 sys=2:19.08 cpu=881%
real=1:18.44 user=9:04.03 sys=2:17.91 cpu=869%
real=1:18.47 user=9:12.94 sys=2:19.68 cpu=882%
real=1:18.49 user=9:13.60 sys=2:19.88 cpu=883%
real=1:18.48 user=9:11.76 sys=2:17.32 cpu=878%
real=1:18.47 user=9:10.91 sys=2:18.77 cpu=879% # average
```
This PR replaced `transport/server` throws of `protocol_exception` with returns. There are a few other places where protocol exceptions are thrown, and there are many places where `invalid_request_exception` is thrown. That is out of scope of this single PR, so the PR just refs, and does not resolve issue #24567.
Refs: #24567Fixes: #25271
This PR improves performance in cases when protocol exceptions happen, for example during connection storms. It will require backporting.
* (cherry picked from commit 7aaeed012e)
* (cherry picked from commit 30d424e0d3)
* (cherry picked from commit 9f4344a435)
* (cherry picked from commit 5390f92afc)
* (cherry picked from commit 4a6f71df68)
Parent PR: #24738Closesscylladb/scylladb#25117
* github.com:scylladb/scylladb:
test/cqlpy: add cpp exception metric test conditions
transport/server: replace protocol_exception throws with returns
utils/reusable_buffer: accept non-throwing writer callbacks via result_with_exception
transport/server: avoid exception-throw overhead in handle_error
test/cqlpy: add protocol_exception tests
In one of the previous commits, we made it possible to set
`recovery_leader` on each node just before restarting it. Here, we
update the corresponding documentation.
(cherry picked from commit f408d1fa4f)
In the previous commit, we made it possible to set `recovery_leader`
on each node just before restarting it. Here, we change all the
tests of the Raft-based recovery procedure to use and test this option.
(cherry picked from commit 9e45e1159b)
In the new Raft-based recovery procedure, live nodes join the new
group 0 one by one during a rolling restart. There is a time window when
some of them are in the old group 0, while others are in the new group
0. This causes a group 0 mismatch in `gossiper::handle_syn_msg`. The
current solution for this problem is to ignore group 0 mismatches if
`recovery_leader` is set on the local node and to ask the administrator
to perform the rolling restart in the following way:
- set `recovery_leader` in `scylla.yaml` on all live nodes,
- send the `SIGHUP` signal to all Scylla processes to reload the config,
- proceed with the rolling restart.
This commit makes `gossiper::handle_syn_msg` ignore group 0 mismatches
when exactly one of the two gossiping nodes has `recovery_leader` set.
We achieve this by adding `recovery_leader` to `gossip_digest_syn`.
This change makes setting `recovery_leader` earlier on all nodes and
reloading the config unnecessary. From now on, the administrator can
simply restart each node with `recovery_leader` set.
However, note that nodes that join group 0 must have `recovery_leader`
set until all nodes join the new group 0. For example, assume that we
are in the middle of the rolling restart and one of the nodes in the new
group 0 crashes. It must be restarted with `recovery_leader` set, or
else it would reject `gossip_digest_syn` messages from nodes in the old
group 0. To avoid problems in such cases, we will continue to recommend
setting `recovery_leader` in `scylla.yaml` instead of passing it as
a command line argument.
(cherry picked from commit ba5b5c7d2f)
Currently, `peers_table_read_fixup` removes rows with no `host_id`, but
not with null `host_id`. Null host IDs are known to appear in system
tables, for example in `system.cluster_status` after a failed bootstrap.
We better make sure we handle them properly if they ever appear in
`system.peers`.
This commit guarantees that null UUID cannot belong to
`loaded_endpoints` in `storage_service::join_cluster`, which in
particular ensures that we throw a runtime error when a user sets
`recovery_leader` to null UUID during the recovery procedure. This is
handled by the code verifying that `recovery_leader` belongs to
`loaded_endpoints`.
(cherry picked from commit 23f59483b6)
We change the type of the `recovery_leader` config parameter and
`gossip_config::recovery_leader` from sstring to UUID. `recovery_leader`
is supposed to store host ID, so UUID is a natural choice.
After changing the type to UUID, if the user provides an incorrect UUID,
parsing `recovery_leader` will fail early, but the start-up will
continue. Outside the recovery procedure, `recovery_leader` will then be
ignored. In the recovery procedure, the start-up will fail on:
```
throw std::runtime_error(
"Cannot start - Raft-based topology has been enabled but persistent group 0 ID is not present. "
"If you are trying to run the Raft-based recovery procedure, you must set recovery_leader.");
```
(cherry picked from commit 445a15ff45)
The PyKMIP server uses an SQLite database to store artifacts such as
encryption keys. By default, SQLite performs a full journal and data
flush to disk on every CREATE TABLE operation. Each operation triggers
three fdatasync(2) calls. If we multiply this by 16, that is the number
of tables created by the server, we get a significant number of file
syncs, which can last for several seconds on slow machines.
This behavior has led to CI stability issues from KMIP unit tests where
the server failed to complete its schema creation within the 20-second
timeout (observed on spider9 and spider11).
Fix this by configuring the server to use an in-memory SQLite.
Fixes#24842.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Closesscylladb/scylladb#24995
(cherry picked from commit 2656fca504)
Closesscylladb/scylladb#25300
Right now, service levels are migrated in one group0 command and auth is migrated in the next one. This has a bad effect on the group0 state reload logic - modifying service levels in group0 causes the effective service levels cache to be recalculated, and to do so we need to fetch information about all roles. If the reload happens after SL upgrade and before auth upgrade, the query for roles will be directed to the legacy auth tables in system_auth - and the query, being a potentially remote query, has a timeout. If the query times out, it will throw an exception which will break the group0 apply fiber and the node will need to be restarted to bring it back to work.
In order to solve this issue, make sure that the service level module does not start populating and using the service level cache until both service levels and auth are migrated to raft. This is achieved by adding the check both to the cache population logic and the effective service level getter - they now look at service level's accessor new method, `can_use_effective_service_level_cache` which takes a look at the auth version.
Fixes: scylladb/scylladb#24963
Should be backported to all versions which support upgrade to topology over raft - the issue described here may put the cluster into a state which is difficult to get out of (group0 apply fiber can break on multiple nodes, which necessitates their restart).
- (cherry picked from commit 2bb800c004)
- (cherry picked from commit 3a082d314c)
Parent PR: #25188Closesscylladb/scylladb#25285
* github.com:scylladb/scylladb:
test: sl: verify that legacy auth is not queried in sl to raft upgrade
qos: don't populate effective service level cache until auth is migrated to raft
Adjust `test_service_levels_upgrade`: right before upgrade to topology
on raft, enable an error injection which triggers when the standard role
manager is about to query the legacy auth tables in the
system_auth keyspace. The preceding commit which fixes
scylladb/scylladb#24963 makes sure that the legacy tables are not
queried during upgrade to topology on raft, so the error injection does
not trigger and does not cause a problem; without that commit, the test
fails.
(cherry picked from commit 3a082d314c)
Right now, service levels are migrated in one group0 command and auth
is migrated in the next one. This has a bad effect on the group0 state
reload logic - modifying service levels in group0 causes the effective
service levels cache to be recalculated, and to do so we need to fetch
information about all roles. If the reload happens after SL upgrade and
before auth upgrade, the query for roles will be directed to the legacy
auth tables in system_auth - and the query, being a potentially remote
query, has a timeout. If the query times out, it will throw
an exception which will break the group0 apply fiber and the node will
need to be restarted to bring it back to work.
In order to solve this issue, make sure that the service level module
does not start populating and using the service level cache until both
service levels and auth are migrated to raft. This is achieved by adding
the check both to the cache population logic and the effective service
level getter - they now look at service level's accessor new method,
`can_use_effective_service_level_cache` which takes a look at the auth
version.
Fixes: scylladb/scylladb#24963
(cherry picked from commit 2bb800c004)
Audit tests are vulnerable to noise from LOGIN queries (because AUTH
audit logs can appear at any time). Most tests already use the
`filter_out_noise` mechanism to remove this noise, but tests
focused on AUTH verification did not, leading to sporadic failures.
This change adds a filter to ignore AUTH logs generated by the default
"cassandra" user, so tests only verify logs from the user created
specifically for each test.
Fixes: scylladb/scylladb#25069
(cherry picked from commit aef6474537)
This is a refactoring commit that changes the names of the parameters
of the `filter_out_noise` function, as well as names of related
variables. The motiviation for the change is introduction of more
complex filtering logic in next commit of this patch series.
Refs: scylladb/scylladb#25069
(cherry picked from commit daf1c58e21)
Currently, in repair_service::repair_tablets a shard that initiates
the repair keeps tablet_repair_task_meta of all tablets that have a replica
on this node (on any shard). This may lead to oversized allocations.
Add remote_metas class which takes care of distributing tablet_repair_task_meta
among different shards. An additional class remote_metas_builder was
added in order to ensure safety and separate writes and reads to meta
vectors.
Fixes: #23632
Do not keep erm in tablet_repair_task_meta to avoid non-owner shared
pointer access when metas will be distributes among shards.
Pass std::chunked_vector of erms to tablet_repair_task_impl to
preserve safety.
Tested code paths should not throw exceptions. `scylla_reactor_cpp_exceptions`
metric is used. This is a global metric. To address potential test flakiness,
each test runs multiple times:
- `run_count = 100`
- `cpp_exception_threshold = 10`
If a change in the code introduced an exception, expectation is that the number
of registered exceptions will be > `cpp_exception_threshold` in `run_count` runs.
In which case the test fails.
Fixes: #25271
(cherry picked from commit 4a6f71df68)
This PR adds the upgrade guide from version 2025.2 to 2025.3.
Also, it removes the upgrade guide existing for the previous version
that is irrelevant in 2025.2 (upgrade from 2025.1 to 2025.2).
Note that the new guide does not include the "Enable Consistent Topology Updates" page and note,
as users upgrading to 2025.3 have consistent topology updates already enabled.
Fixes https://github.com/scylladb/scylladb/issues/24696Closesscylladb/scylladb#25219
(cherry picked from commit 8365219d40)
Closesscylladb/scylladb#25248
This commit:
- Extends the Drivers support table with information on which driver supports tablets
and since which version.
- Adds the driver support policy to the Drivers page.
- Reorganizes the Drivers page to accommodate the updates.
In addition:
- The CPP-over-Rust driver is added to the table.
- The information about Serverless (which we don't support) is removed
and replaced with tablets to correctly describe the contents of the table.
Fixes https://github.com/scylladb/scylladb/issues/19471
Refs https://github.com/scylladb/scylladb-docs-homepage/issues/69Closesscylladb/scylladb#24635
(cherry picked from commit 18b4d4a77c)
Closesscylladb/scylladb#25251
Replace throwing protocol_exception with returning it as a result
or an exceptional future in the transport server module. This
improves performance, for example during connection storms and
server restarts, where protocol exceptions are more frequent.
In functions already returning a future, protocol exceptions are
propagated using an exceptional future. In functions not already
returning a future, result_with_exception is used.
Notable change is checking v.failed() before calling v.get() in
process_request function, to avoid throwing in case of an
exceptional future.
Refs: #24567Fixes: #25271
(cherry picked from commit 5390f92afc)
Make make_bytes_ostream and make_fragmented_temporary_buffer accept
writer callbacks that return utils::result_with_exception instead of
forcing them to throw on error. This lets callers propagate failures
by returning an error result rather than throwing an exception.
Introduce buffer_writer_for, bytes_ostream_writer, and fragmented_buffer_writer
concepts to simplify and document the template requirements on writer callbacks.
This patch does not modify the actual callbacks passed, except for the syntax
changes needed for successful compilation, without changing the logic.
Refs: #24567Fixes: #25271
(cherry picked from commit 9f4344a435)
Previously, connection::handle_error always called f.get() inside a try/catch,
forcing every failed future to throw and immediately catch an exception just to
classify it. This change eliminates that extra throw/catch cycle by first checking
f.failed(), getting the stored std::exception_ptr via f.get_exception(), and
then dispatching on its type via utils::try_catch<T>(eptr).
The error-response logic is not changed - cassandra_exception, std::exception,
and unknown exceptions are caught and processed, and any exceptions thrown by
write_response while handling those exceptions continues to escape handle_error.
Refs: #24567Fixes: #25271
(cherry picked from commit 30d424e0d3)
Add a helper to fetch scylla_transport_cql_errors_total{type="protocol_error"} counter
from Scylla's metrics endpoint. These metrics are used to track protocol error
count before and after each test.
Add cql_with_protocol context manager utility for session creation with parameterized
protocol_version value. This is used for testing connection establishment with
different protocol versions, and proper disposal of successfully established sessions.
The tests cover two failure scenarios:
- Protocol version mismatch in test_protocol_version_mismatch which tests both supported
and unsupported protocol version
- Malformed frames via raw socket in _protocol_error_impl, used by several test functions,
and also test_no_protocol_exceptions test to assert that the error counters never decrease
during test execution, catching unintended metric resets
Refs: #24567Fixes: #25271
(cherry picked from commit 7aaeed012e)
This PR reverts the changes of #24418 since they can cause use-after-free.
The `raft_group0::abort()` was called in `storage_service::do_drain` (introduced in #24418) to stop the group0 Raft server before destroying local storage. This was necessary because `raft::server` depends on storage (via `raft_sys_table_storage` and `group0_state_machine`).
However, this caused issues: services like `sstable_dict_autotrainer` and `auth::service`, which use `group0_client` but are not stopped by `storage_service`, could trigger use-after-free if `raft_group0` was destroyed too early. This can happen both during normal shutdown and when 'nodetool drain' is used.
This PR reverts two of the three commits from #24418. The commit [e456d2d](e456d2d507) is not reverted because it only affects logging and does not impact correctness.
Fixesscylladb/scylladb#25221
Backport: this PR is a backport
Closesscylladb/scylladb#25206
* https://github.com/scylladb/scylladb:
Revert "main.cc: fix group0 shutdown order"
Revert "storage_service: test_group0_apply_while_node_is_being_shutdown"
Enhance and fix error handling in the `chunked_download_source` to prevent errors seeping from the request callback. Also stop retrying on seastar's side since it is going to break the integrity of data which maybe downloaded more than once for the same range.
Fixes: https://github.com/scylladb/scylladb/issues/25043
Should be backported to 2025.3 since we have an intention to release native backup/restore feature
- (cherry picked from commit d53095d72f)
- (cherry picked from commit b7ae6507cd)
- (cherry picked from commit ba910b29ce)
- (cherry picked from commit fc2c9dd290)
Parent PR: #24883Closesscylladb/scylladb#25137
* github.com:scylladb/scylladb:
s3_client: Disable Seastar-level retries in HTTP client creation
s3_test: Validate handling of non-`aws_error` exceptions
s3_client: Improve error handling in chunked_download_source
aws_error: Add factory method for `aws_error` from exception
When a node shuts down, in storage service, after storage_proxy RPCs are stopped, some write handlers within storage_proxy may still be waiting for background writes to complete. These handlers hold appropriate ERMs to block schema changes before the write finishes. After the RPCs are stopped, these writes cannot receive the replies anymore.
If, at the same time, there are RPC commands executing `barrier_and_drain`, they may get stuck waiting for these ERM holders to finish, potentially blocking node shutdown until the writes time out.
This change introduces cancellation of all outstanding write handlers from storage_service after the storage proxy RPCs were stopped.
Fixes scylladb/scylladb#23665
Backport: since this fixes an issue that frequently causes issues in CI, backport to 2025.1, 2025.2, and 2025.3.
- (cherry picked from commit bc934827bc)
- (cherry picked from commit e0dc73f52a)
Parent PR: #24714Closesscylladb/scylladb#25170
* github.com:scylladb/scylladb:
storage_service: Cancel all write requests on storage_proxy shutdown
test: Add test for unfinished writes during shutdown and topology change
Currently, progress of a parent task depends on expected_total_workload,
expected_children_number, and children progresses. Basically, if total
workload is known or all children have already been created, progresses
of children are summed up. Otherwise binary progress is returned.
As a result, two tasks of the same type may return progress in different
units. If they are children of the same task and this parent gathers the
progress - it becomes meaningless.
Drop expected_children_number as we can't assume that children are able
to show their progresses.
Modify get_progress method - progress is calculated based on children
progresses. If expected_total_workload isn't specified, the total
progress of a task may grow. If expected_total_workload isn't specified
and no children are created, empty progress (0/0) is returned.
Fixes: https://github.com/scylladb/scylladb/issues/24650.
Closesscylladb/scylladb#25113
(cherry picked from commit a7ee2bbbd8)
Closesscylladb/scylladb#25200
This series fixes one cause of oversized allocations - and therefore potentially stalls and increased tail latencies - in Alternator.
The first patch in the series is the main fix - the later patches are cleanups requested by reviewers but also involved other pre-existing code, so I did those cleanups as separate patches.
Alternator's Scan or Query operation return a page of results. When the number of items is not limited by a "Limit" parameter, the default is to return a 1 MB page. If items are short, a large number of them can fit in that 1MB. The test test_query.py::test_query_large_page_small_rows has 30,000 items returned in a single page.
In the response JSON, all these items are returned in a single array "Items". Before this patch, we build the full response as a RapidJSON object before sending it. The problem is that unfortunately, RapidJSON stores arrays as contiguous allocations. This results in large contiguous allocations in workloads that scan many small items, and large contiguous allocations can also cause stalls and high tail latencies. For example, before this patch, running
test/alternator/run --runveryslow \
test_query.py::test_query_large_page_small_rows
reports in the log:
oversized allocation: 573440 bytes.
After this patch, this warning no longer appears.
The patch solves the problem by collecting the scanned items not in a RapidJSON array, but rather in a chunked_vector<rjson::value>, i.e, a chunked (non-contiguous) array of items (each a JSON value). After collecting this array separately from the response object, we need to print its content without actually inserting it into the object - we add a new function print_with_extra_array() to do that.
The new separate-chunked-vector technique is used when a large number (currently, >256) of items were scanned. When there is a smaller number of items in a page (this is typical when each item is longer), we just insert those items in the object and print it as before.
Beyond the original slow test that demonstrated the oversized allocation (which is now gone), this patch also includes a new test which exercises the new code with a scan of 700 (>256) items in a page - but this new test is fast enough to be permanently in our test suite and not a manual "veryslow" test as the other test.
Fixes#23535
The stalls caused by large allocations was seen by actual users, so it makes sense to backport this patch. On the other hand, the patch while not big is fairly intrusive (modifies the nomal Scan and Query path and also the later patches do some cleanup of additional code) so there is some small risk involved in the backport.
- (cherry picked from commit 2385fba4b6)
- (cherry picked from commit d8fab2a01a)
- (cherry picked from commit 13ec94107a)
- (cherry picked from commit a248336e66)
Parent PR: #24480Closesscylladb/scylladb#25194
* github.com:scylladb/scylladb:
alternator: clean up by co-routinizing
alternator: avoid spamming the log when failing to write response
alternator: clean up and simplify request_return_type
alternator: avoid oversized allocation in Query/Scan
Reviewers of the previous patch complained on some ugly pre-existing
code in alternator/executor.cc, where returning from an asynchronous
(future) function require lengthy verbose casts. So this patch cleans
up a few instances of these ugly casts by using co_return instead of
return.
For example, the long and verbose
return make_ready_future<executor::request_return_type>(
rjson::print(std::move(response)));
can be changed to the shorter and more readable
co_return rjson::print(std::move(response));
This patch should not have any functional implications, and also not any
performance implications: I only coroutinized slow-path functions and
one function that was already "partially" coroutinized (and this was
expecially ugly and deserved being fixed).
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
(cherry picked from commit a248336e66)
Both make_streamed() and new make_streamed_with_extra_array() functions,
used when returning a long response in Alternator, would write an error-
level log message if it failed to write the response. This log message
is probably not helpful, and may spam the log if the application causes
repeated errors intentionally or accidentally.
So drop these log messages. The exception is still thrown as usual.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
(cherry picked from commit 13ec94107a)
The previous patch introduced a function make_streamed_with_extra_array
which was a duplicate of the existing make_streamed. Reviewers
complained how baroque the new function is (just like the old function),
having to jump through hoops to return a copyable function working
on non-copyable objects, making strange-named copies and shared pointers
of everything.
We needed to return a copyable function (std::function) just because
Alternator used Seastar's json::json_return_type in the return type
from executor function (request_return_type). This json_return_type
contained either a sstring or an std::function, but neither was ever
really appropriate:
1. We want to return noncopyable_function, not an std::function!
2. We want to return an std::string (which rjson::print()) returns,
not an sstring!
So in this patch we stop using seastar::json::json_return_type
entirely in Alternator.
Alternator's request_return_type is now an std::variant of *three* types:
1. std::string for short responses,
2. noncopyable_function for long streamed response
3. api_error for errors.
The ugliest parts of make_streamed() where we made copies and shared
pointers to allow for a copyable function are all gone. Even nicer, a
lot of other ugly relics of using seastar::json_return_type are gone:
1. We no longer need obscure classes and functions like make_jsonable()
and json_string() to convert strings to response bodies - an operation
can simply return a string directly - usually returning
rjson::print(value) or a fixed string like "" and it just works.
2. There is no more usage of seastar::json in Alternator (except one
minor use of seastar::json::formatter::to_json in streams.cc that
can be removed later). Alternator uses RapidJSON for its JSON
needs, we don't need to use random pieces from a different JSON
library.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
(cherry picked from commit d8fab2a01a)
This patch fixes one cause of oversized allocations - and therefore
potentially stalls and increased tail latencies - in Alternator.
Alternator's Scan or Query operation return a page of results. When the
number of items is not limited by a "Limit" parameter, the default is
to return a 1 MB page. If items are short, a large number of them can
fit in that 1MB. The test test_query.py::test_query_large_page_small_rows
has 30,000 items returned in a single page.
In the response JSON, all these items are returned in a single array
"Items". Before this patch, we build the full response as a RapidJSON
object before sending it. The problem is that unfortunately, RapidJSON
stores arrays as contiguous allocations. This results in large
contiguous allocations in workloads that scan many small items, and
large contiguous allocations can also cause stalls and high tail
latencies. For example, before this patch, running
test/alternator/run --runveryslow \
test_query.py::test_query_large_page_small_rows
reports in the log:
oversized allocation: 573440 bytes.
After this patch, this warning no longer appears.
The patch solves the problem by collecting the scanned items not in a
RapidJSON array, but rather in a chunked_vector<rjson::value>, i.e,
a chunked (non-contiguous) array of items (each a JSON value).
After collecting this array separately from the response object, we
need to print its content without actually inserting it into the object -
we add a new function print_with_extra_array() to do that.
The new separate-chunked-vector technique is used when a large number
(currently, >256) of items were scanned. When there is a smaller number
of items in a page (this is typical when each item is longer), we just
insert those items in the object and print it as before.
Beyond the original slow test that demonstrated the oversized allocation
(which is now gone), this patch also includes a new test which
exercises the new code with a scan of 700 (>256) items in a page -
but this new test is fast enough to be permanently in our test suite
and not a manual "veryslow" test as the other test.
Fixes#23535
(cherry picked from commit 2385fba4b6)
Fixes#24574
* Ensure we close the embedded load_cache objects on encryption shutdown, otherwise we can, in unit testing, get destruction of these while a timer is still active -> assert
* Add extra exception handling to `network_error_test_helper`, so even if test framework might exception-escape, we properly stop the network proxy to avoid use after free.
- (cherry picked from commit ee98f5d361)
- (cherry picked from commit 8d37e5e24b)
Parent PR: #24633Closesscylladb/scylladb#24772
* github.com:scylladb/scylladb:
encryption_at_rest_test: Add exception handler to ensure proxy stop
encryption: Ensure stopping timers in provider cache objects
This issue happens with removenode, when RBNO is disabled, so range
streamer is used.
The deadlock happens in a scenario like this:
1. Start 3 nodes: {A, B, C}, RF=2
2. Node A is lost
3. removenode A
4. Both B and C gain ownership of ranges.
5. Streaming sessions are started with crossed directions: B->C, C->B
Readers created by sender side exhaust streaming semaphore on B and C.
Receiver side attempts to obtain a permit indirectly by calling
check_needs_view_update_path(), which reads local tables. That read is
blocked and times-out, causing streaming to fail. The streaming writer
is already using a tracking-only permit.
Even if we didn't deadlock, and the streaming semaphore was simply exhausted
by other receiving sessions (via tracking-only permit), the query may still time-out due to starvation.
To avoid that, run the query under a different scheduling group, which
translates to the system semaphore instead of the maintenance
semaphore, to break the dependency. The gossip group was chosen
because it shouldn't be contended and this change should not interfere
with it much.
Fixes#24807Fixes#24925
- (cherry picked from commit ee2fa58bd6)
- (cherry picked from commit dff2b01237)
Parent PR: #24929Closesscylladb/scylladb#25058
* github.com:scylladb/scylladb:
streaming: Avoid deadlock by running view checks in a separate scheduling group
service: migration_manager: Run group0 barrier in gossip scheduling group
During a graceful node shutdown, RPC listeners are stopped in `storage_service::drain_on_shutdown`
as one of the first steps. However, even after RPCs are shut down, some write handlers in
`storage_proxy` may still be waiting for background writes to complete. These handlers retain the ERM.
Since the RPC subsystem is no longer active, replies cannot be received, and if any RPC commands are
concurrently executing `barrier_and_drain`, they may get stuck waiting for those writes. This can block
the messaging server shutdown and delay the entire shutdown process until the write timeout occurs.
This change introduces the cancellation of all outstanding write handlers in `storage_proxy`
during shutdown to prevent unnecessary delays.
Fixesscylladb/scylladb#23665
(cherry picked from commit e0dc73f52a)
This test reproduces an issue where a topology change and an ongoing write query
during query coordinator shutdown can cause the node to get stuck.
When a node receives a write request, it creates a write handler that holds
a copy of the current table's ERM (Effective Replication Map). The ERM ensures
that no topology or schema changes occur while the request is being processed.
After the query coordinator receives the required number of replica write ACKs
to satisfy the consistency level (CL), it sends a reply to the client. However,
the write response handler remains alive until all replicas respond — the remaining
writes are handled in the background.
During shutdown, when all network connections are closed, these responses can no longer
be received. As a result, the write response handler is only destroyed once the write
timeout is reached.
This becomes problematic because the ERM held by the handler blocks topology or schema
change commands from executing. Since shutdown waits for these commands to complete,
this can lead to unnecessary delays in node shutdown and restarts, and occasional
test case failures.
Test for: scylladb/scylladb#23665
(cherry picked from commit bc934827bc)
Prevent Seastar from retrying HTTP requests to avoid buffer double-feed
issues when an entire request is retried. This could cause data
corruption in `chunked_download_source`. The change is global for every
instance of `s3_client`, but it is still safe because:
* Seastar's `http_client` resets connections regardless of retry behavior
* `s3_client` retry logic handles all error types—exceptions, HTTP errors,
and AWS-specific errors—via `http_retryable_client`
(cherry picked from commit fc2c9dd290)
Inject exceptions not wrapped in `aws_error` from request callback
lambda to verify they are properly caught and handled.
(cherry picked from commit ba910b29ce)
Create aws_error from raised exceptions when possible and respond
appropriately. Previously, non-aws_exception types leaked from the
request handler and were treated as non-retryable, causing potential
data corruption during download.
(cherry picked from commit b7ae6507cd)
Move `aws_error` creation logic out of `retryable_http_client` and
into the `aws_error` class to support reuse across components.
(cherry picked from commit d53095d72f)
Add `make_data_or_index_source` to the storages to utilize new S3 based data source which should improve restore performance
* Introduce the `encrypted_data_source` class that wraps an existing data source to read and decrypt data on the fly using block encryption. Also add unit tests to verify correct decryption behavior.
* Add `make_data_or_index_source` to the `storage` interface, implement it for `filesystem_storage` storage which just creates `data_source` from a file and for the `s3_storage` create a (maybe) decrypting source from s3 make_download_source. This change should solve performance improvement for reading large objects from S3 and should not affect anything for the `filesystem_storage`
Fixes: https://github.com/scylladb/scylladb/issues/22458
- (cherry picked from commit 211daeaa40)
- (cherry picked from commit 7e5e3c5569)
- (cherry picked from commit 0de61f56a2)
- (cherry picked from commit 8ac2978239)
- (cherry picked from commit dff9a229a7)
- (cherry picked from commit 8d49bb8af2)
Parent PR: #23695Closesscylladb/scylladb#25016
* github.com:scylladb/scylladb:
sstables: Start using `make_data_or_index_source` in `sstable`
sstables: refactor readers and sources to use coroutines
sstables: coroutinize futurized readers
sstables: add `make_data_or_index_source` to the `storage`
encryption: refactor key retrieval
encryption: add `encrypted_data_source` class
The set of columns of a CDC log table should be managed automatically
by Scylla, and the user should not have the ability to manipulate them
directly. That could lead to disastrous consequences such as a
segmentation fault.
In this commit, we're restricting those operations. We also provide two
validation tests.
One of the existing tests had to be adjusted as it modified the type
of a column in a CDC log table. Since the test simply verifies that
the user has sufficient permissions to perform `ALTER TABLE` on the log
table, the test is still valid.
Fixes scylladb/scylladb#24643
Backport: we should backport the change to all affected
branches to prevent the consequences that may affect the user.
- (cherry picked from commit 20d0050f4e)
- (cherry picked from commit 59800b1d66)
Parent PR: #25008Closesscylladb/scylladb#25108
* github.com:scylladb/scylladb:
cdc: Forbid altering columns of inactive CDC log table
cdc: Forbid altering columns of CDC log tables directly
When CDC becomes disabled on the base table, the CDC log table
still exsits (cf. scylladb/scylladb@adda43edc7).
If it continues to exist up to the point when CDC is re-enabled
on the base table, no new log table will be created -- instead,
the old olg table will be *re-attached*.
Since we want to avoid situations when the definition of the log
table has become misaligned with the definition of the base table
due to actions of the user, we forbid modifying the set of columns
or renaming them in CDC log tables, even when they're inactive.
Validation tests are provided.
(cherry picked from commit 59800b1d66)
The set of columns of a CDC log table should be managed automatically
by Scylla, and the user should not have the ability to manipulate them
directly. That could lead to disastrous consequences such as a
segmentation fault.
In this commit, we're restricting those operations. We also provide two
validation tests.
One of the existing tests had to be adjusted as it modified the type
of a column in a CDC log table. Since the test simply verifies that
the user has sufficient permissions to perform `ALTER TABLE` on the log
table, the test is still valid.
Fixesscylladb/scylladb#24643
(cherry picked from commit 20d0050f4e)
in the CDC log transformer, when creating a CDC mutation based on some
base table mutation, for each value of a base column we set the value in
the CDC column with the same name.
When looking up the column in the CDC schema by name, we may get a null
pointer if a column by that name is not found. This shouldn't happen
normally because the base schema and CDC schema should be compatible,
and for each base column there should be a CDC column with the same
name.
However, there are scenarios where the base schema and CDC schema are
incompatible for a short period of time when they are being altered.
When a base column is being added or dropped, we could get a base
mutation with this column set, and then the CDC transformer picks up the
latest CDC schema which doesn't have this column.
If such thing happens, we fix the code to throw an exception instead of
crashing on null pointer dereference. Currently we don't have a safer
approach to handle this, but this might be changed in the future. The
other alternative is dropping that data silently which we prefer not to
do.
Throwing an error is acceptable because this scenario most likely
indicates this behavior by the user:
* The user adds a new column, and start writing values to the column
before the ALTER is complete. or,
* The user drops a column, and continues writing values to the column
while it's being dropped.
Both cases might as well fail with an error because the column is not
found in the base table.
Fixes scylladb/scylladb#/24952
backport needed - simple fix for a node crash
- (cherry picked from commit b336f282ae)
- (cherry picked from commit 86dfa6324f)
Parent PR: #24986Closesscylladb/scylladb#25067
* github.com:scylladb/scylladb:
test: cdc: add test_cdc_with_alter
cdc: throw error if column doesn't exist
in the CDC log transformer, when creating a CDC mutation based on some
base table mutation, for each value of a base column we set the value in
the CDC column with the same name.
When looking up the column in the CDC schema by name, we may get a null
pointer if a column by that name is not found. This shouldn't happen
normally because the base schema and CDC schema should be compatible,
and for each base column there should be a CDC column with the same
name.
However, there are scenarios where the base schema and CDC schema are
incompatible for a short period of time when they are being altered.
When a base column is being added or dropped, we could get a base
mutation with this column set, and then the CDC transformer picks up the
latest CDC schema which doesn't have this column.
If such thing happens, we fix the code to throw an exception instead of
crashing on null pointer dereference. Currently we don't have a safer
approach to handle this, but this might be changed in the future. The
other alternative is dropping that data silently which we prefer not to
do.
Throwing an error is acceptable because this scenario most likely
indicates this behavior by the user:
* The user adds a new column, and start writing values to the column
before the ALTER is complete. or,
* The user drops a column, and continues writing values to the column
while it's being dropped.
Both cases might as well fail with an error because the column is not
found in the base table.
Fixesscylladb/scylladb#24952
(cherry picked from commit b336f282ae)
This issue happens with removenode, when RBNO is disabled, so range
streamer is used.
The deadlock happens in a scenario like this:
1. Start 3 nodes: {A, B, C}, RF=2
2. Node A is lost
3. removenode A
4. Both B and C gain ownership of ranges.
5. Streaming sessions are started with crossed directions: B->C, C->B
Readers created by sender side exhaust streaming semaphore on B and C.
Receiver side attempts to obtain a permit indirectly by calling
check_needs_view_update_path(), which reads local tables. That read is
blocked and times-out, causing streaming to fail. The streaming writer
is already using a tracking-only permit.
To avoid that, run the query under a different scheduling group, which
translates to the system semaphore instead of the maintenance
semaphore, to break the dependency. The gossip group was chosen
because it shouldn't be contended and this change should not interfere
with it much.
Fixes: #24807
(cherry picked from commit dff2b01237)
Fixes two issues.
One is potential priority inversion. The barrier will be executed
using scheduling group of the first fiber which triggers it, the rest
will block waiting on it. For example, CQL statements which need to
sync the schema on replica side can block on the barrier triggered by
streaming. That's undesirable. This is theoretical, not proved in the
field.
The second problem is blocking the error path. This barrier is called
from the streaming error handling path. If the streaming concurrency
semaphore is exhausted, and streaming fails due to timeout on
obtaining the permit in check_needs_view_update_path(), the error path
will block too because it will also attempt to obtain the permit as
part of the group0 barrier. Running it in the gossip scheduling group
prevents this.
Fixes#24925
(cherry picked from commit ee2fa58bd6)
The functions password_authenticator::start and
standard_role_manager::start have a similar structure: they spawn a
fiber which invokes a callback that performs some migration until that
migration succeeds. Both handlers set a shared promise called
_superuser_created_promise (those are actually two promises, one for the
password authenticator and the other for the role manager).
The handlers are similar in both cases. They check if auth is in legacy
mode, and behave differently depending on that. If in legacy mode, the
promise is set (if it was not set before), and some legacy migration
actions follow. In auth-on-raft mode, the superuser is attempted to be
created, and if it succeeds then the promise is _unconditionally_ set.
While it makes sense at a glance to set the promise unconditionally,
there is a non-obvious corner case during upgrade to topology on raft.
During the upgrade, auth switches from the legacy mode to auth on raft
mode. Thus, if the callback didn't succeed in legacy mode and then tries
to run in auth-on-raft mode and succeds, it will unconditionally set a
promise that was already set - this is a bug and triggers an assertion
in seastar.
Fix the issue by surrounding the `shared_promise::set_value` call with
an `if` - like it is already done for the legacy case.
Fixes: scylladb/scylladb#24975Closesscylladb/scylladb#24976
(cherry picked from commit a14b7f71fe)
Closesscylladb/scylladb#25019
Convert all necessary methods to be awaitable. Start using `make_data_or_index_source`
when creating data_source for data and index components.
For proper working of compressed/checksummed input streams, start passing
stream creator functors to `make_(checksummed/compressed)_file_(k_l/m)_format_input_stream`.
(cherry picked from commit 8d49bb8af2)
Refactor readers and sources to support coroutine usage in
preparation for integration with `make_data_or_index_source`.
Move coroutine-based member initialization out of constructors
where applicable, and defer initialization until first use.
(cherry picked from commit dff9a229a7)
Add `make_data_or_index_source` to the `storage` interface, implement it
for `filesystem_storage` storage which just creates `data_source` from a
file and for the `s3_storage` create a (maybe) decrypting source from s3
make_download_source.
This change should solve performance improvement for reading large objects
from S3 and should not affect anything for the `filesystem_storage`.
(cherry picked from commit 0de61f56a2)
Introduce the `encrypted_data_source` class that wraps an existing data
source to read and decrypt data on the fly using block encryption. Also add
unit tests to verify correct decryption behavior.
NOTE: The wrapped source MUST read from offset 0, `encrypted_data_source` assumes it is
Co-authored-by: Calle Wilund <calle@scylladb.com>
(cherry picked from commit 211daeaa40)
The test could fail with RF={DC1: 2, DC2: 0} and CL=ONE when:
- both writes succeeded with the same replica responding first,
- one of the following reads succeeded with the other replica
responding before it applied mutations from any of the writes.
We fix the test by not expecting reads with CL=ONE to return a row.
We also harden the test by inserting different rows for every pair
(CL, coordinator), where one of the two coordinators is a normal
node from DC1, and the other one is a zero-token node from DC2.
This change makes sure that, for example, every write really
inserts a row.
Fixesscylladb/scylladb#22967
The fix addresses CI flakiness and only changes the test, so it
should be backported.
Closesscylladb/scylladb#23518
(cherry picked from commit 21edec1ace)
Closesscylladb/scylladb#24985
- Fix missing negation in the `if` in the background downloading fiber
- Add test to catch this case
- Improve the s3 proxy to inject errors if the same resource requested more than once
- Suppress client retry since retrying the same request when each produces multiple buffers may lead to the same data appear more than once in the buffer deque
- Inject exception from the test to simulate response callback failure in the middle
No need to backport anything since this class in not used yet
- (cherry picked from commit f1d0690194)
- (cherry picked from commit e73b83e039)
- (cherry picked from commit 6d9cec558a)
- (cherry picked from commit ec59fcd5e4)
- (cherry picked from commit c75acd274c)
- (cherry picked from commit d2d69cbc8c)
- (cherry picked from commit e50f247bf1)
- (cherry picked from commit 49e8c14a86)
- (cherry picked from commit a5246bbe53)
- (cherry picked from commit acf15eba8e)
Parent PR: #24657Closesscylladb/scylladb#24943
* github.com:scylladb/scylladb:
s3_test: Add s3_client test for non-retryable error handling
s3_test: Add trace logging for default_retry_strategy
s3_client: Fix edge case when the range is exhausted
s3_client: Fix indentation in try..catch block
s3_client: Stop retries in chunked download source
s3_client: Enhance test coverage for retry logic
s3_client: Add test for Content-Range fix
s3_client: Fix missing negation
s3_client: Refine logging
s3_client: Improve logging placement for current_range output
When a tablet transitions to a post-cleanup stage on the leaving replica
we deallocate its storage group. Before the storage can be deallocated
and destroyed, we must make sure it's cleaned up and stopped properly.
Normally this happens during the tablet cleanup stage, when
table::cleanup_table is called, so by the time we transition to the next
stage the storage group is already stopped.
However, it's possible that tablet cleanup did not run in some scenario:
1. The topology coordinator runs tablet cleanup on the leaving replica.
2. The leaving replica is restarted.
3. When the leaving replica starts, still in `cleanup` stage, it
allocates a storage group for the tablet.
4. The topology coordinator moves to the next stage.
5. The leaving replica deallocates the storage group, but it was not
stopped.
To address this scenario, we always stop the storage group when
deallocating it. Usually it will be already stopped and complete
immediately, and otherwise it will be stopped in the background.
Fixesscylladb/scylladb#24857Fixesscylladb/scylladb#24828Closesscylladb/scylladb#24896
(cherry picked from commit fa24fd7cc3)
Closesscylladb/scylladb#24909
If small_table_optimization is on, a repair works on a whole table
simultaneously. It may be distributed across the whole cluster and
all nodes might participate in repair.
On a repair master, row buffer is copied for each repair peer.
This means that the memory scales with the number of peers.
In large clusters, repair with small_table_optimization leads to OOM.
Divide the max_row_buf_size by the number of repair peers if
small_table_optimization is on.
Use max_row_buf_size to calculate number of units taken from mem_sem.
Fixes: https://github.com/scylladb/scylladb/issues/22244.
Closesscylladb/scylladb#24868
(cherry picked from commit 17272c2f3b)
Closesscylladb/scylladb#24907
The test has two major problems
1. Wrongly computed time windows. Data was not spread across two 1-minute
windows causing the test to generate even three sstables instead
of two
2. Timestamp was not propagated to the prepared CQL statements. So
in fact, a current time was used implicitly
3. Because of the incorrect timestamp issue, the remaining tests
testing purged tombstones were affected as well.
Fixes https://github.com/scylladb/scylladb/issues/24532Closesscylladb/scylladb#24609
(cherry picked from commit a22d1034af)
Closesscylladb/scylladb#24791
ScyllaDB container image doesn't have ps command installed, while this command is used by perftune.py script shipped within the same image. This breaks node and container tuning in Scylla Operator.
Fixes: #24827Closesscylladb/scylladb#24830
(cherry picked from commit 66ff6ab6f9)
Closesscylladb/scylladb#24956
Introduce a test that injects a non-retryable error and verifies
that the chunked download source throws an exception as expected.
(cherry picked from commit acf15eba8e)
Introduce trace-level logging for `default_retry_strategy` in
`s3_test` to improve visibility into retry logic during test
execution.
(cherry picked from commit a5246bbe53)
Handle case where the download loop exits after consuming all data,
but before receiving an empty buffer signaling EOF. Without this, the
next request is sent with a non-zero offset and zero length, resulting
in "Range request cannot be satisfied" errors. Now, an empty buffer is
pushed to indicate completion and exit the fiber properly.
(cherry picked from commit 49e8c14a86)
Disable retries for S3 requests in the chunked download source to
prevent duplicate chunks from corrupting the buffer queue. The
response handler now throws an exception to bypass the retry
strategy, allowing the next range to be attempted cleanly.
This exception is only triggered for retryable errors; unretryable
ones immediately halt further requests.
(cherry picked from commit d2d69cbc8c)
Extend the S3 proxy to support error injection when the client
makes multiple requests to the same resource—useful for testing
retry behavior and failure handling.
(cherry picked from commit c75acd274c)
Introduce a test that accurately verifies the Content-Range
behavior, ensuring the previous fix is properly validated.
(cherry picked from commit ec59fcd5e4)
Relocated logging to occur after determining the `current_range`,
ensuring more relevant output during S3 client operations.
(cherry picked from commit f1d0690194)
This reverts commit 04fb2c026d. 2025.3 got
the reduced threshold, but won't get many of the fixes the warning will
generate, leaving it very noisy. Better to avoid the noise for this release.
Fixes#24384.
make_repair_plan() allocates a temporary vector which can grow larger
than our 128k basic allocation unit. Use a chunked vector to avoid
stalls due to large allocations.
Fixes#24713.
Closesscylladb/scylladb#24801
(cherry picked from commit 0138afa63b)
Closesscylladb/scylladb#24902
The series adds more logging and provides new REST api around topology command rpc execution to allow easier debugging of stuck topology operations.
Backport since we want to have in the production as quick as possible.
Fixes#24860
- (cherry picked from commit c8ce9d1c60)
- (cherry picked from commit 4e6369f35b)
Parent PR: #24799Closesscylladb/scylladb#24881
* https://github.com/scylladb/scylladb:
topology coordinator: log a start and an end of topology coordinator command execution at info level
topology coordinator: add REST endpoint to query the status of ongoing topology cmd rpc
When replaying a failed batch and sending the mutation to all replicas, make the write response handler cancellable and abort it on shutdown or if some target is marked down. also set a reasonable timeout so it gets aborted if it's stuck for some other unexpected reason.
Previously, the write response handler is not cancellable and has no timeout. This can cause a scenario where some write operation by the batchlog manager is stuck indefinitely, and node shutdown gets stuck as well because it waits for the batchlog manager to complete, without aborting the operation.
backport to relevant versions since the issue can cause node shutdown to hang
Fixes scylladb/scylladb#24599
- (cherry picked from commit 8d48b27062)
- (cherry picked from commit fc5ba4a1ea)
- (cherry picked from commit 7150632cf2)
- (cherry picked from commit 74a3fa9671)
- (cherry picked from commit a9b476e057)
- (cherry picked from commit d7af26a437)
Parent PR: #24595Closesscylladb/scylladb#24882
* github.com:scylladb/scylladb:
test: test_batchlog_manager: batchlog replay includes cdc
test: test_batchlog_manager: test batch replay when a node is down
batchlog_manager: set timeout on writes
batchlog_manager: abort writes on shutdown
batchlog_manager: create cancellable write response handler
storage_proxy: add write type parameter to mutate_internal
Add a new test that verifies that when replaying batch mutations from
the batchlog, the mutations include cdc augmentation if needed.
This is done in order to verify that it works currently as expected and
doesn't break in the future.
(cherry picked from commit d7af26a437)
Add a test of the batchlog manager replay loop applying failed batches
while some replica is down.
The test reproduces an issue where the batchlog manager tries to replay
a failed batch, doesn't get a response from some replica, and becomes
stuck.
It verifies that the batchlog manager can eventually recover from this
situation and continue applying failed batches.
(cherry picked from commit a9b476e057)
Set a timeout on writes of replayed batches by the batchlog manager.
We want to avoid having infinite timeout for the writes in case it gets
stuck for some unexpected reason.
The timeout is set to be high enough to allow any reasonable write to
complete.
(cherry picked from commit 74a3fa9671)
On shutdown of batchlog manager, abort all writes of replayed batches
by the batchlog manager.
To achieve this we set the appropriate write_type to BATCH, and on
shutdown cancel all write handlers with this type.
(cherry picked from commit 7150632cf2)
When replaying a batch mutation from the batchlog manager and sending it
to all replicas, create the write response handler as cancellable.
To achieve this we define a new wrapper type for batchlog mutations -
batchlog_replay_mutation, and this allows us to overload
create_write_response_handler for this type. This is similar to how it's
done with hint_wrapper and read_repair_mutation.
(cherry picked from commit fc5ba4a1ea)
Currently mutate_internal has a boolean parameter `counter_write` that
indicates whether the write is of counter type or not.
We replace it with a more general parameter that allows to indicate the
write type.
It is compatible with the previous behavior - for a counter write, the
type COUNTER is passed, and otherwise a default value will be used
as before.
(cherry picked from commit 8d48b27062)
The topology coordinator executes several topology cmd rpc against some nodes
during a topology change. A topology operation will not proceed unless
rpc completes (successfully or not), but sometimes it appears that it
hangs and it is hard to tell on which nodes it did not complete yet.
Introduce new REST endpoint that can help with debugging such cases.
If executed on the topology coordinator it returns currently running
topology rpc (if any) and a list of nodes that did not reply yet.
(cherry picked from commit c8ce9d1c60)
As seen in #23284, when the tablet_metadata contains many tables, even empty ones,
we're seeing a long queue of seastar tasks coming from the individual destruction of
`tablet_map_ptr = foreign_ptr<lw_shared_ptr<const tablet_map>>`.
This change improves `tablet_metadata::clear_gently` to destroy the `tablet_map_ptr` objects
on their owner shard by sorting them into vectors, per- owner shard.
Also, background call to clear_gently was added to `~token_metadata`, as it is destroyed
arbitrarily when automatic token_metadata_ptr variables go out of scope, so that the
contained tablet_metadata would be cleared gently.
Finally, a unit test was added to reproduce the `Too long queue accumulated for gossip` symptom
and verify that it is gone with this change.
Fixes#24814
Refs #23284
This change is not marked as fixing the issue since we still need to verify that there is no impact on query performance, reactor stalls, or large allocations, with a large number of tablet-based tables.
* Since the issue exists in 2025.1, requesting backport to 2025.1 and upwards
- (cherry picked from commit 3acca0aa63)
- (cherry picked from commit 493a2303da)
- (cherry picked from commit e0a19b981a)
- (cherry picked from commit 2b2cfaba6e)
- (cherry picked from commit 2c0bafb934)
- (cherry picked from commit 4a3d14a031)
- (cherry picked from commit 6e4803a750)
Parent PR: #24618Closesscylladb/scylladb#24864
* github.com:scylladb/scylladb:
token_metadata_impl: clear_gently: release version tracker early
test: cluster: test_tablets_merge: add test_tablet_split_merge_with_many_tables
token_metadata: clear_and_destroy_impl when destroyed
token_metadata: keep a reference to shared_token_metadata
token_metadata: move make_token_metadata_ptr into shared_token_metadata class
replica: database: get and expose a mutable locator::shared_token_metadata
locator: tablets: tablet_metadata: clear_gently: optimize foreign ptr destruction
Old nodes do not expect global topology request names to be in
request_type field, so set it only if a cluster is fully upgraded
already.
Closesscylladb/scylladb#24731
(cherry picked from commit ca7837550d)
Closesscylladb/scylladb#24833
No need to wait for all members to be cleared gently.
We can release the version earlier since the
held version may be awaited for in barriers.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 6e4803a750)
Reproduces #23284
Currently skipped in release mode since it requires
the `short_tablet_stats_refresh_interval` interval.
Ref #24641
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 4a3d14a031)
We have a lot of places in the code where
a token_metadata_ptr is kept in an automatic
variable and destroyed when it leaves the scope.
since it's a referenced counted lw_shared_ptr,
the token_metadata object is rarely destroyed in
those cases, but when it is, it doesn't go through
clear_gently, and in particular its tablet_metadata
is not cleared gently, leading to inefficient destruction
of potentially many foreign_ptr:s.
This patch calls clear_and_destroy_impl that gently
clears and destroys the impl object in the background
using the shared_token_metadata.
Fixes#13381
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 2c0bafb934)
To be used by a following patch to gently clean and destroy
the token_data_impl in the background.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 2b2cfaba6e)
So we can use the local shared_token_metadata instance
for safe background destroy of token_metadata_impl:s.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit e0a19b981a)
Prepare for next patch, the will use this shared_token_metadata
to make mutable_token_metadata_ptr:s
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 493a2303da)
Sort all tablet_map_ptr:s by shard_id
and then destroy them on each shard to prevent
long cross-shard task queues for foreign_ptr destructions.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 3acca0aa63)
Currently, when computing the mutation to be stored in system.batchlog,
we go through data_value. In turn this goes through `bytes` type
(#24810), so it causes a large contiguous allocation if the batch is
large.
Fix by going through the more primitive, but less contiguous,
atomic_cell API.
Fixes#24809.
Closesscylladb/scylladb#24811
(cherry picked from commit 60f407bff4)
Closesscylladb/scylladb#24846
We move a `seastar::promise` on the external worker thread,
after the matching `seastar::future` was returned to the shard.
That's illegal. If the `promise` move occurs concurrently with some
operation (move, await) on the `future`, it becomes a data race
which could cause various kinds of corruption.
This patch fixes that by keeping the promise at a stable address
on the shard (inside a coroutine frame) and only passing through
the worker.
Fixes#24751Closesscylladb/scylladb#24752
(cherry picked from commit a29724479a)
Closesscylladb/scylladb#24780
to_repair_rows_on_wire() moves the contents of its input std::list
and is careful to yield after each element, but the final destruction
of the input list still deals with all of the list elements without
yielding. This is expensive as not all contents of repair_row are moved
(_dk_with_hash is of type lw_shared_ptr<const decorated_key_with_hash>).
To fix, destroy each row element as we move along. This is safe as we
own the input and don't reference row_list other than for the iteration.
Fixes#24725.
Closesscylladb/scylladb#24726
(cherry picked from commit 6aa71205d8)
Closesscylladb/scylladb#24771
Currently, repair_service::repair_tablets starts repair if there
is no ongoing tablet operations. The check does not consider global
topology operations, like tablet resize finalization.
Hence, if:
- topology is in the tablet_resize_finalization state;
- repair starts (as there is no tablet transitions) and holds the erm;
- resize finalization finishes;
then the repair sees a topology state different than the actual -
it does not see that the storage groups were already split.
Repair code does not handle this case and it results with
on_internal_error.
Start repair when topology is not busy. The check isn't atomic,
as it's done on a shard 0. Thus, we compare the topology versions
to ensure that the business check is valid.
Fixes: https://github.com/scylladb/scylladb/issues/24195.
Needs backport to all branches since they are affected
- (cherry picked from commit df152d9824)
- (cherry picked from commit 83c9af9670)
Parent PR: #24202Closesscylladb/scylladb#24783
* github.com:scylladb/scylladb:
test: add test for repair and resize finalization
repair: postpone repair until topology is not busy
If boost test is run such that we somehow except even in a test macro
such as BOOST_REQUIRE_THROW, we could end up not stopping the net proxy
used, causing a use after free.
(cherry picked from commit 8d37e5e24b)
utils::loading cache has a timer that can, if we're unlucky, be runnnig
while the encryption context/extensions referencing the various host
objects containing them are destroyed in the case of unit testing.
Add a stop phase in encryption context shutdown closing the caches.
(cherry picked from commit ee98f5d361)
ScyllaDB supports non-frozen UDTs since 3.2, no need to keep referencing
this limitation in the current docs. Replace the description of the
limitation with general description of frozen semantics for UDTs.
Fixes: #22929Closesscylladb/scylladb#24763
(cherry picked from commit 37ef9efb4e)
Closesscylladb/scylladb#24784
Currently, repair_service::repair_tablets starts repair if there
is no ongoing tablet operations. The check does not consider global
topology operations, like tablet resize finalization. This may cause
a data race and unexpected behavior.
Start repair when topology is not busy.
(cherry picked from commit df152d9824)
./test.py --mode=dev test/cluster/test_raft_no_quorum.py --repeat 5# Repeat test 5 times
```
**Important:**
- Use full path with `.py` extension (e.g., `test/cluster/test_raft_no_quorum.py`, not `cluster/test_raft_no_quorum`)
- To run a single test case, append `::<test_function_name>` to the file path
- Add `-v` for verbose output
- Add `--repeat <num>` to repeat a test multiple times
- After modifying C++ source files, only rebuild the Scylla binary for Python tests - building the entire repository is unnecessary
## Code Philosophy
- Performance matters in hot paths (data read/write, inner loops)
- Self-documenting code through clear naming
- Comments explain "why", not "what"
- Prefer standard library over custom implementations
- Strive for simplicity and clarity, add complexity only when clearly justified
- Question requests: don't blindly implement requests - evaluate trade-offs, identify issues, and suggest better alternatives when appropriate
- Consider different approaches, weigh pros and cons, and recommend the best fit for the specific context
## Test Philosophy
- Performance matters. Tests should run as quickly as possible. Sleeps in the code are highly discouraged and should be avoided, to reduce run time and flakiness.
- Stability matters. Tests should be stable. New tests should be executed 100 times at least to ensure they pass 100 out of 100 times. (use --repeat 100 --max-failures 1 when running it)
- Unit tests should ideally test one thing and one thing only.
- Tests for bug fixes should run before the fix - and show the failure and after the fix - and show they now pass.
- Tests for bug fixes should have in their comments which bug fixes (GitHub or JIRA issue) they test.
- Tests in debug are always slower, so if needed, reduce number of iterations, rows, data used, cycles, etc. in debug mode.
- Tests should strive to be repeatable, and not use random input that will make their results unpredictable.
- Tests should consume as little resources as possible. Prefer running tests on a single node if it is sufficient, for example.
- name:Comment and close if author email is scylladb.com
uses:actions/github-script@v7
with:
github-token:${{ secrets.GITHUB_TOKEN }}
script:|
const issue = context.payload.issue;
const actor = context.actor;
// Get user data (only public email is available)
const { data: user } = await github.rest.users.getByUsername({
username: actor,
});
const email = user.email || "";
console.log(`Actor: ${actor}, public email: ${email || "<none>"}`);
// Only continue if email exists and ends with @scylladb.com
if (!email || !email.toLowerCase().endsWith("@scylladb.com")) {
console.log("User is not a scylladb.com email (or email not public); skipping.");
return;
}
const owner = context.repo.owner;
const repo = context.repo.repo;
const issue_number = issue.number;
const body = "Issues in this repository are closed automatically. Scylla associates should use Jira to manage issues.\nPlease move this issue to Jira https://scylladb.atlassian.net/jira/software/c/projects/SCYLLADB/list";
CLEANER_DIRS:test/unit exceptions alternator api auth cdc compaction db dht gms index lang message mutation mutation_writer node_ops raft redis replica service
@@ -12,7 +12,7 @@ Please use the [issue tracker](https://github.com/scylladb/scylla/issues/) to re
## Contributing code to Scylla
Before you can contribute code to Scylla for the first time, you should sign the [Contributor License Agreement](https://www.scylladb.com/open-source/contributor-agreement/) and send the signed form to cla@scylladb.com. You can then submit your changes as patches to the [scylladb-dev mailing list](https://groups.google.com/forum/#!forum/scylladb-dev) or as a pull request to the [Scylla project on github](https://github.com/scylladb/scylla).
Before you can contribute code to Scylla for the first time, you should sign the [Contributor License Agreement](https://www.scylladb.com/open-source/contributor-agreement/) and send the signed form cla@scylladb.com. You can then submit your changes as patches to the [scylladb-dev mailing list](https://groups.google.com/forum/#!forum/scylladb-dev) or as a pull request to the [Scylla project on github](https://github.com/scylladb/scylla).
If you need help formatting or sending patches, [check out these instructions](https://github.com/scylladb/scylla/wiki/Formatting-and-sending-patches).
The Scylla C++ source code uses the [Seastar coding style](https://github.com/scylladb/seastar/blob/master/coding-style.md) so please adhere to that in your patches. Note that Scylla code is written with `using namespace seastar`, so should not explicitly add the `seastar::` prefix to Seastar symbols. You will usually not need to add `using namespace seastar` to new source files, because most Scylla header files have `#include "seastarx.hh"`, which does this.
and other sanity checks. It has no optimizations, which allows for debugging with tools like
@@ -361,7 +361,7 @@ avoid that the gold linker can be told to create an index with
More info at https://gcc.gnu.org/wiki/DebugFission.
Both options can be enabled by passing `--split-dwarf` to configure.py.
Both options can be enable by passing `--split-dwarf` to configure.py.
Note that distcc is *not* compatible with it, but icecream
(https://github.com/icecc/icecream) is.
@@ -370,7 +370,7 @@ Note that distcc is *not* compatible with it, but icecream
Sometimes Scylla development is closely tied with a feature being developed in Seastar. It can be useful to compile Scylla with a particular check-out of Seastar.
One way to do this is to create a local remote for the Seastar submodule in the Scylla repository:
One way to do this it to create a local remote for the Seastar submodule in the Scylla repository:
slogger.warn("alternator_warn_authorization=true: {} for user {}, client address {}",e.what(),user,client_address);
}
throwstd::move(e);
}else{
if(warn_authorization){
slogger.warn("If you set alternator_enforce_authorization=true the following will be enforced: {} for user {}, client address {}",e.what(),user,client_address);
seastar::metrics::make_histogram("batch_item_count_histogram",seastar::metrics::description("Histogram of the number of items in a batch request"),labels,
seastar::metrics::make_histogram("batch_item_count_histogram",seastar::metrics::description("Histogram of the number of items in a batch request"),labels,
seastar::metrics::description("Counts number of hits of cached expressions"),labels)(expression_label("UpdateExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of misses of cached expressions"),labels)(expression_label("UpdateExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of hits of cached expressions"),labels)(expression_label("ConditionExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of misses of cached expressions"),labels)(expression_label("ConditionExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of hits of cached expressions"),labels)(expression_label("ProjectionExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of misses of cached expressions"),labels)(expression_label("ProjectionExpression")).aggregate(aggregate_labels).set_skip_when_empty()
});
// Only register the following metrics for the global metrics, not per-table
co_returnapi_error::unknown_operation("UpdateTimeToLive not yet supported. Experimental support is available if the 'alternator-ttl' experimental feature is enabled on all nodes.");
// Should never happen - we verified the column's type
// before starting the scan.
[[unlikely]]
on_internal_error(tlogger,format("expiration scanner value of unsupported type {} in column {}",meta[*expiration_column]->type->cql3_type_name(),scan_ctx.column_name));
}
// must be a numeric type.
// FIXME: Currently we only support decimal_type (which is
// what Alternator uses), but other numeric types can be
// supported as well to make this feature more useful in CQL.
"summary":"This method returns the N endpoints that are responsible for storing the specified key i.e for replication. the endpoint responsible for this key",
"type":"array",
"items":{
"type":"string"
},
"nickname":"get_natural_endpoints_v2",
"produces":[
"application/json"
],
"parameters":[
{
"name":"keyspace",
"description":"The keyspace to query about.",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"path"
},
{
"name":"cf",
"description":"Column family name.",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"key_component",
"description":"Each component of the key for which we need to find the endpoint (e.g. ?key_component=part1&key_component=part2).",
"description":"Load the sstables and stream to the primary replica node within the scope, if one is specified. If not, stream to the global primary replica.",
"required":false,
"allowMultiple":false,
"type":"boolean",
"paramType":"query"
}
]
}
@@ -1195,14 +1124,6 @@
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"drop_unfixable_sstables",
"description":"When set to true, drop unfixable sstables. Applies only to scrub mode SEGREGATE.",
"required":false,
"allowMultiple":false,
"type":"boolean",
"paramType":"query"
}
]
}
@@ -1295,45 +1216,6 @@
}
]
},
{
"path":"/storage_service/logstor_compaction",
"operations":[
{
"method":"POST",
"summary":"Trigger compaction of the key-value storage",
"type":"void",
"nickname":"logstor_compaction",
"produces":[
"application/json"
],
"parameters":[
{
"name":"major",
"description":"When true, perform a major compaction",
"required":false,
"allowMultiple":false,
"type":"boolean",
"paramType":"query"
}
]
}
]
},
{
"path":"/storage_service/logstor_flush",
"operations":[
{
"method":"POST",
"summary":"Trigger flush of logstor storage",
"type":"void",
"nickname":"logstor_flush",
"produces":[
"application/json"
],
"parameters":[]
}
]
},
{
"path":"/storage_service/active_repair/",
"operations":[
@@ -1661,30 +1543,6 @@
}
]
},
{
"path":"/storage_service/exclude_node",
"operations":[
{
"method":"POST",
"summary":"Marks the node as permanently down (excluded).",
"type":"void",
"nickname":"exclude_node",
"produces":[
"application/json"
],
"parameters":[
{
"name":"hosts",
"description":"Comma-separated list of host ids to exclude",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
}
]
}
]
},
{
"path":"/storage_service/removal_status",
"operations":[
@@ -3087,14 +2945,6 @@
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"incremental_mode",
"description":"Set the incremental repair mode. Can be 'disabled', 'incremental', or 'full'. 'incremental': The incremental repair logic is enabled. Unrepaired sstables will be included for repair. Repaired sstables will be skipped. The incremental repair states will be updated after repair. 'full': The incremental repair logic is enabled. Both repaired and unrepaired sstables will be included for repair. The incremental repair states will be updated after repair. 'disabled': The incremental repair logic is disabled completely. The incremental repair states, e.g., repaired_at in sstables and sstables_repaired_at in the system.tablets table, will not be updated after repair. When the option is not provided, it defaults to incremental mode.",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
}
]
}
@@ -3124,48 +2974,6 @@
}
]
},
{
"path":"/storage_service/tablets/snapshots",
"operations":[
{
"method":"POST",
"summary":"Takes the snapshot for the given keyspaces/tables. A snapshot name must be specified.",
"type":"void",
"nickname":"take_cluster_snapshot",
"produces":[
"application/json"
],
"parameters":[
{
"name":"tag",
"description":"the tag given to the snapshot",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"keyspace",
"description":"Keyspace(s) to snapshot. Multiple keyspaces can be provided using a comma-separated list. If omitted, snapshot all keyspaces.",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"table",
"description":"Table(s) to snapshot. Multiple tables (in a single keyspace) can be provided using a comma-separated list. If omitted, snapshot all tables in the given keyspace(s).",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
}
]
}
]
},
{
"path":"/storage_service/quiesce_topology",
"operations":[
@@ -3268,38 +3076,6 @@
}
]
},
{
"path":"/storage_service/logstor_info",
"operations":[
{
"method":"GET",
"summary":"Logstor segment information for one table",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
