docs: master → docs-staging (#5990)

* Makefile: always pull image in proto-gen-docker. (#5953)

The `proto-gen-docker` target didn't pull an updated Docker image, and would use a local image if present which could be outdated and produce wrong results.

* test: fix TestPEXReactorRunning data race (#5955)

Fixes #5941.

Not entirely sure that this will fix the problem (couldn't reproduce), but in any case this is an artifact of a hack in the P2P transport refactor to make it work with the legacy P2P stack, and will be removed when the refactor is done anyway.

* test/fuzz: move fuzz tests into this repo (#5918)

Co-authored-by: Emmanuel T Odeke <emmanuel@orijtech.com>

Closes #5907

- add init-corpus to blockchain reactor
- remove validator-set FromBytes test
now that we have proto, we don't need to test it! bye amino
- simplify mempool test
do we want to test remote ABCI app?
- do not recreate mux on every crash in jsonrpc test
- update p2p pex reactor test
- remove p2p/listener test
the API has changed + I did not understand what it's tested anyway
- update secretconnection test
- add readme and makefile
- list inputs in readme
- add nightly workflow
- remove blockchain fuzz test
EncodeMsg / DecodeMsg no longer exist

* docker: dont login when in PR (#5961)

* docker: release Linux/ARM64 image (#5925)

Co-authored-by: Marko <marbar3778@yahoo.com>

* p2p: make PeerManager.DialNext() and EvictNext() block (#5947)

See #5936 and #5938 for background.

The plan was initially to have `DialNext()` and `EvictNext()` return a channel. However, implementing this became unnecessarily complicated and error-prone. As an example, the channel would be both consumed and populated (via method calls) by the same driving method (e.g. `Router.dialPeers()`) which could easily cause deadlocks where a method call blocked while sending on the channel that the caller itself was responsible for consuming (but couldn't since it was busy making the method call). It would also require a set of goroutines in the peer manager that would interact with the goroutines in the router in non-obvious ways, and fully populating the channel on startup could cause deadlocks with other startup tasks. Several issues like these made the solution hard to reason about.

I therefore simply made `DialNext()` and `EvictNext()` block until the next peer was available, using internal triggers to wake these methods up in a non-blocking fashion when any relevant state changes occurred. This proved much simpler to reason about, since there are no goroutines in the peer manager (except for trivial retry timers), nor any blocking channel sends, and it instead relies entirely on the existing goroutine structure of the router for concurrency. This also happens to be the same pattern used by the `Transport.Accept()` API, following Go stdlib conventions, so all router goroutines end up using a consistent pattern as well.

* libs/log: format []byte as hexidecimal string (uppercased) (#5960)

Closes: #5806 

Co-authored-by: Lanie Hei <heixx011@umn.edu>

* docs: log level docs (#5945)

## Description

add section on configuring log levels

Closes: #XXX

* .github: fix fuzz-nightly job (#5965)

outputs is a property of the job, not an individual step.

* e2e: add control over the log level of nodes (#5958)

* mempool: fix reactor tests (#5967)

## Description

Update the faux router to either drop channel errors or handle them based on an argument. This prevents deadlocks in tests where we try to send an error on the mempool channel but there is no reader.

Closes: #5956

* p2p: improve peerStore prototype (#5954)

This improves the `peerStore` prototype by e.g.:

* Using a database with Protobuf for persistence, but also keeping full peer set in memory for performance.
* Simplifying the API, by taking/returning struct copies for safety, and removing errors for in-memory operations.
* Caching the ranked peer set, as a temporary solution until a better data structure is implemented.
* Adding `PeerManagerOptions.MaxPeers` and pruning the peer store (based on rank) when it's full.
* Rewriting `PeerAddress` to be independent of `url.URL`, normalizing it and tightening semantics.

* p2p: simplify PeerManager upgrade logic (#5962)

Follow-up from #5947, branched off of #5954.

This simplifies the upgrade logic by adding explicit eviction requests, which can also be useful for other use-cases (e.g. if we need to ban a peer that's misbehaving). Changes:

* Add `evict` map which queues up peers to explicitly evict.
* `upgrading` now only tracks peers that we're upgrading via dialing (`DialNext` → `Dialed`/`DialFailed`).
* `Dialed` will unmark `upgrading`, and queue `evict` if still beyond capacity.
* `Accepted` will pick a random lower-scored peer to upgrade to, if appropriate, and doesn't care about `upgrading` (the dial will fail later, since it's already connected).
* `EvictNext` will return a peer scheduled in `evict` if any, otherwise if beyond capacity just evict the lowest-scored peer.

This limits all of the `upgrading` logic to `DialNext`, `Dialed`, and `DialFailed`, making it much simplier, and it should generally do the right thing in all cases I can think of.

* p2p: add PeerManager.Advertise() (#5957)

Adds a naïve `PeerManager.Advertise()` method that the new PEX reactor can use to fetch addresses to advertise, as well as some other `FIXME`s on address advertisement.

* blockchain v0: fix waitgroup data race (#5970)

## Description

Fixes the data race in usage of `WaitGroup`. Specifically, the case where we invoke `Wait` _before_ the first delta `Add` call when the current waitgroup counter is zero. See https://golang.org/pkg/sync/#WaitGroup.Add.

Still not sure how this manifests itself in a test since the reactor has to be stopped virtually immediately after being started (I think?).

Regardless, this is the appropriate fix.

closes: #5968

* tests: fix `make test` (#5966)

## Description
 
- bump deadlock dep to master
  - fixes `make test` since we now use `deadlock.Once`

Closes: #XXX

* terminate go-fuzz gracefully (w/ SIGINT) (#5973)

and preserve exit code.

```
2021/01/26 03:34:49 workers: 2, corpus: 4 (8m28s ago), crashers: 0, restarts: 1/9976, execs: 11013732 (21596/sec), cover: 121, uptime: 8m30s
make: *** [fuzz-mempool] Terminated
Makefile:5: recipe for target 'fuzz-mempool' failed
Error: Process completed with exit code 124.
```

https://github.com/tendermint/tendermint/runs/1766661614

`continue-on-error` should make GH ignore any error codes.

* p2p: add prototype PEX reactor for new stack (#5971)

This adds a prototype PEX reactor for the new P2P stack.

* proto/p2p: rename PEX messages and fields (#5974)

Fixes #5899 by renaming a bunch of P2P Protobuf entities (while maintaining wire compatibility):

* `Message` to `PexMessage` (as it's only used for PEX messages).
* `PexAddrs` to `PexResponse`.
* `PexResponse.Addrs` to `PexResponse.Addresses`.
* `NetAddress` to `PexAddress` (as it's only used by PEX).

* p2p: resolve PEX addresses in PEX reactor (#5980)

This changes the new prototype PEX reactor to resolve peer address URLs into IP/port PEX addresses itself. Branched off of #5974.

I've spent some time thinking about address handling in the P2P stack. We currently use `PeerAddress` URLs everywhere, except for two places: when dialing a peer, and when exchanging addresses via PEX. We had two options:

1. Resolve addresses to endpoints inside `PeerManager`. This would introduce a lot of added complexity: we would have to track connection statistics per endpoint, have goroutines that asynchronously resolve and refresh these endpoints, deal with resolve scheduling before dialing (which is trickier than it sounds since it involves multiple goroutines in the peer manager and router and messes with peer rating order), handle IP address visibility issues, and so on.

2. Resolve addresses to endpoints (IP/port) only where they're used: when dialing, and in PEX. Everywhere else we use URLs.

I went with 2, because this significantly simplifies the handling of hostname resolution, and because I really think the PEX reactor should migrate to exchanging URLs instead of IP/port numbers anyway -- this allows operators to use DNS names for validators (and can easily migrate them to new IPs and/or load balance requests), and also allows different protocols (e.g. QUIC and `MemoryTransport`). Happy to discuss this.

* test/p2p: close transports to avoid goroutine leak failures (#5982)

* mempool: fix TestReactorNoBroadcastToSender (#5984)

## Description

Looks like I missed a test in the original PR when fixing the tests.

Closes: #5956

* mempool: fix mempool tests timeout (#5988)

* p2p: use stopCtx when dialing peers in Router (#5983)

This ensures we don't leak dial goroutines when shutting down the router.

* docs: fix typo in state sync example (#5989)

Co-authored-by: Erik Grinaker <erik@interchain.berlin>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Co-authored-by: odidev <odidev@puresoftware.com>
Co-authored-by: Lanie Hei <heixx011@umn.edu>
Co-authored-by: Callum Waters <cmwaters19@gmail.com>
Co-authored-by: Aleksandr Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: Sergey <52304443+c29r3@users.noreply.github.com>

.github/CODEOWNERS

@@ -1,12 +1,25 @@
 # CODEOWNERS: https://help.github.com/articles/about-codeowners/
 
-# Everything goes through the following "global owners" by default.
+# Everything goes through the following "global owners" by default. 
 # Unless a later match takes precedence, these three will be
-# requested for review when someone opens a PR.
+# requested for review when someone opens a PR. 
 # Note that the last matching pattern takes precedence, so
 # global owners are only requested if there isn't a more specific
-# codeowner specified below. For this reason, the global codeowners
+# codeowner specified below. For this reason, the global codeowners 
 # are often repeated in package-level definitions.
-*      @ebuchman @cmwaters @tychoish @williambanfield @creachadair @sergio-mena @jmalicevic @thanethomson @samricotta
+*       @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+
+# Overrides for tooling packages
+.github/ @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+DOCKER/ @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+
+# Overrides for core Tendermint packages 
+abci/  @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+evidence/ @cmwaters @ebuchman @melekes @tessr
+light/ @cmwaters @melekes @ebuchman @tessr
+
+# Overrides for docs
+*.md @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr  
+docs/ @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+
 
-/spec @josef-widder @milosevic @cason @sergio-mena @jmalicevic

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,7 +1,7 @@
-Please add a description of the changes that this PR introduces and the files that
-are the most critical to review.
+## Description
 
-If this PR fixes an open Issue, please include "Closes #XXX" (where "XXX" is the Issue number) 
-so that GitHub will automatically close the Issue when this PR is merged.
+_Please add a description of the changes that this PR introduces and the files that
+are the most critical to review._ 
 
+Closes: #XXX
 

.github/auto-comment.yml

@@ -1,16 +1,16 @@
 pullRequestOpened: |
-  :wave: Thanks for creating a PR!
+  :wave: Thanks for creating a PR!   
 
-  Before we can merge this PR, please make sure that all the following items have been
+  Before we can merge this PR, please make sure that all the following items have been 
   checked off. If any of the checklist items are not applicable, please leave them but
-  write a little note why.
+  write a little note why.   
 
-  - [ ] Wrote tests
-  - [ ] Updated CHANGELOG_PENDING.md
-  - [ ] Linked to Github issue with discussion and accepted design OR link to spec that describes this work.
-  - [ ] Updated relevant documentation (`docs/`) and code comments
-  - [ ] Re-reviewed `Files changed` in the Github PR explorer
-  - [ ] Applied Appropriate Labels
+  - [ ] Wrote tests  
+  - [ ] Updated CHANGELOG_PENDING.md   
+  - [ ] Linked to Github issue with discussion and accepted design OR link to spec that describes this work.  
+  - [ ] Updated relevant documentation (`docs/`) and code comments  
+  - [ ] Re-reviewed `Files changed` in the Github PR explorer  
+  - [ ] Applied Appropriate Labels  
 
 
-  Thank you for your contribution to Tendermint! :rocket:
+  Thank you for your contribution to Tendermint! :rocket:   

.github/codecov.yml

@@ -5,14 +5,19 @@ coverage:
   status:
     project:
       default:
-        threshold: 20%
-    patch: off
+        threshold: 1%
+    patch: on
     changes: off
 
 github_checks:
   annotations: false
 
-comment: false
+comment:
+  layout: "diff, files"
+  behavior: default
+  require_changes: no
+  require_base: no
+  require_head: yes
 
 ignore:
   - "docs"
@@ -20,6 +25,3 @@ ignore:
   - "scripts"
   - "**/*.pb.go"
   - "libs/pubsub/query/query.peg.go"
-  - "*.md"
-  - "*.rst"
-  - "*.yml"

.github/dependabot.yml

@@ -0,0 +1,28 @@
+version: 2
+updates:
+  - package-ecosystem: github-actions
+    directory: "/"
+    schedule:
+      interval: daily
+      time: "11:00"
+    open-pull-requests-limit: 10
+  - package-ecosystem: npm
+    directory: "/docs"
+    schedule:
+      interval: daily
+      time: "11:00"
+    open-pull-requests-limit: 10
+    reviewers:
+      - fadeev
+  - package-ecosystem: gomod
+    directory: "/"
+    schedule:
+      interval: daily
+      time: "11:00"
+    open-pull-requests-limit: 10
+    reviewers:
+      - melekes
+      - tessr
+      - erikgrinaker
+    labels:
+      - T:dependencies

.github/linter/markdownlint.yml

@@ -0,0 +1,8 @@
+default: true,
+MD007: { "indent": 4 }
+MD013: false
+MD024: { siblings_only: true }
+MD025: false
+MD033: { no-inline-html: false }
+no-hard-tabs: false
+whitespace: false

.github/linters/markdownlint.yml

@@ -1,8 +0,0 @@
-default: true,
-MD007: {"indent": 4}
-MD013: false
-MD024: {siblings_only: true}
-MD025: false
-MD033: {no-inline-html: false}
-no-hard-tabs: false
-whitespace: false

.github/linters/yaml-lint.yml

@@ -1,9 +0,0 @@
----
-# Default rules for YAML linting from super-linter.
-# See: See https://yamllint.readthedocs.io/en/stable/rules.html
-extends: default
-rules:
-  document-end: disable
-  document-start: disable
-  line-length: disable
-  truthy: disable

.github/mergify.yml

@@ -1,19 +1,10 @@
-queue_rules:
-  - name: default
-    conditions:
-      - base=v0.35.x
-      - label=S:automerge
-
 pull_request_rules:
-  - name: Automerge to v0.35.x
+  - name: Automerge to master
     conditions:
-      - base=v0.35.x
+      - base=master
       - label=S:automerge
     actions:
-      queue:
+      merge:
         method: squash
-        name: default
-        commit_message_template: |
-          {{ title }} (#{{ number }})
-
-          {{ body }}
+        strict: true
+        commit_message: title+body

.github/workflows/build.yml

@@ -1,82 +0,0 @@
-name: Build
-# Tests runs different tests (test_abci_apps, test_abci_cli, test_apps)
-# This workflow runs on every push to master or release branch and  every pull requests
-# All jobs will pass without running if no *{.go, .mod, .sum} files have been modified
-on:
-  pull_request:
-  push:
-    branches:
-      - master
-      - release/**
-
-jobs:
-  build:
-    name: Build
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        goarch: ["arm", "amd64"]
-        goos: ["linux"]
-    timeout-minutes: 5
-    steps:
-      - uses: actions/setup-go@v3
-        with:
-          go-version: "1.17"
-      - uses: actions/checkout@v3
-      - uses: technote-space/get-diff-action@v6
-        with:
-          PATTERNS: |
-            **/**.go
-            "!test/"
-            go.mod
-            go.sum
-            Makefile
-      - name: install
-        run: GOOS=${{ matrix.goos }} GOARCH=${{ matrix.goarch }} make build
-        if: "env.GIT_DIFF != ''"
-
-  test_abci_cli:
-    runs-on: ubuntu-latest
-    needs: build
-    timeout-minutes: 5
-    steps:
-      - uses: actions/setup-go@v3
-        with:
-          go-version: "1.17"
-      - uses: actions/checkout@v3
-      - uses: technote-space/get-diff-action@v6
-        with:
-          PATTERNS: |
-            **/**.go
-            go.mod
-            go.sum
-      - name: install
-        run: make install_abci
-        if: "env.GIT_DIFF != ''"
-      - run: abci/tests/test_cli/test.sh
-        shell: bash
-        if: "env.GIT_DIFF != ''"
-
-  test_apps:
-    runs-on: ubuntu-latest
-    needs: build
-    timeout-minutes: 5
-    steps:
-      - uses: actions/setup-go@v3
-        with:
-          go-version: "1.17"
-      - uses: actions/checkout@v3
-      - uses: technote-space/get-diff-action@v6
-        with:
-          PATTERNS: |
-            **/**.go
-            go.mod
-            go.sum
-      - name: install
-        run: make install install_abci
-        if: "env.GIT_DIFF != ''"
-      - name: test_apps
-        run: test/app/test.sh
-        shell: bash
-        if: "env.GIT_DIFF != ''"

.github/workflows/coverage.yml

@@ -0,0 +1,127 @@
+name: Test Coverage
+on:
+  pull_request:
+  push:
+    branches:
+      - master
+      - release/**
+
+jobs:
+  split-test-files:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - name: Create a file with all the pkgs
+        run: go list ./... > pkgs.txt
+      - name: Split pkgs into 4 files
+        run: split -d -n l/4 pkgs.txt pkgs.txt.part.
+      # cache multiple
+      - uses: actions/upload-artifact@v2
+        with:
+          name: "${{ github.sha }}-00"
+          path: ./pkgs.txt.part.00
+      - uses: actions/upload-artifact@v2
+        with:
+          name: "${{ github.sha }}-01"
+          path: ./pkgs.txt.part.01
+      - uses: actions/upload-artifact@v2
+        with:
+          name: "${{ github.sha }}-02"
+          path: ./pkgs.txt.part.02
+      - uses: actions/upload-artifact@v2
+        with:
+          name: "${{ github.sha }}-03"
+          path: ./pkgs.txt.part.03
+
+  build-linux:
+    name: Build
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        goarch: ["arm", "amd64"]
+    timeout-minutes: 5
+    steps:
+      - uses: actions/setup-go@v2
+        with:
+          go-version: "1.15"
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
+        with:
+          PATTERNS: |
+            **/**.go
+            go.mod
+            go.sum
+      - name: install
+        run: GOOS=linux GOARCH=${{ matrix.goarch }} make build
+        if: "env.GIT_DIFF != ''"
+
+  tests:
+    runs-on: ubuntu-latest
+    needs: split-test-files
+    strategy:
+      fail-fast: false
+      matrix:
+        part: ["00", "01", "02", "03"]
+    steps:
+      - uses: actions/setup-go@v2
+        with:
+          go-version: "1.15"
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
+        with:
+          PATTERNS: |
+            **/**.go
+            go.mod
+            go.sum
+      - uses: actions/download-artifact@v2
+        with:
+          name: "${{ github.sha }}-${{ matrix.part }}"
+        if: env.GIT_DIFF
+      - name: Set up Go
+        uses: actions/setup-go@v2
+        with:
+          go-version: 1.15
+      - name: test & coverage report creation
+        run: |
+          cat pkgs.txt.part.${{ matrix.part }} | xargs go test -mod=readonly -timeout 8m -race -coverprofile=${{ matrix.part }}profile.out -covermode=atomic
+        if: env.GIT_DIFF
+      - uses: actions/upload-artifact@v2
+        with:
+          name: "${{ github.sha }}-${{ matrix.part }}-coverage"
+          path: ./${{ matrix.part }}profile.out
+
+  upload-coverage-report:
+    runs-on: ubuntu-latest
+    needs: tests
+    steps:
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
+        with:
+          PATTERNS: |
+            **/**.go
+            go.mod
+            go.sum
+      - uses: actions/download-artifact@v2
+        with:
+          name: "${{ github.sha }}-00-coverage"
+        if: env.GIT_DIFF
+      - uses: actions/download-artifact@v2
+        with:
+          name: "${{ github.sha }}-01-coverage"
+        if: env.GIT_DIFF
+      - uses: actions/download-artifact@v2
+        with:
+          name: "${{ github.sha }}-02-coverage"
+        if: env.GIT_DIFF
+      - uses: actions/download-artifact@v2
+        with:
+          name: "${{ github.sha }}-03-coverage"
+        if: env.GIT_DIFF
+      - run: |
+          cat ./*profile.out | grep -v "mode: atomic" >> coverage.txt
+        if: env.GIT_DIFF
+      - uses: codecov/codecov-action@v1.2.1
+        with:
+          file: ./coverage.txt
+        if: env.GIT_DIFF

.github/workflows/docker.yml

@@ -1,19 +1,20 @@
-name: Docker
-# Build & Push rebuilds the tendermint docker image on every push to master and creation of tags
+name: Build & Push
+#  Build & Push rebuilds the tendermint docker image on every push to master and creation of tags
 # and pushes the image to https://hub.docker.com/r/interchainio/simapp/tags
 on:
+  pull_request:
   push:
     branches:
       - master
     tags:
-      - "v[0-9]+.[0-9]+.[0-9]+"  # Push events to matching v*, i.e. v1.0, v20.15.10
-      - "v[0-9]+.[0-9]+.[0-9]+-rc*"  # Push events to matching v*, i.e. v1.0-rc1, v20.15.10-rc5
+      - "v[0-9]+.[0-9]+.[0-9]+" # Push events to matching v*, i.e. v1.0, v20.15.10
+      - "v[0-9]+.[0-9]+.[0-9]+-rc*" # Push events to matching v*, i.e. v1.0-rc1, v20.15.10-rc5
 
 jobs:
   build:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@master
       - name: Prepare
         id: prep
         run: |
@@ -38,18 +39,18 @@ jobs:
         with:
           platforms: all
 
-      - name: Set up Docker Build
-        uses: docker/setup-buildx-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v1
 
       - name: Login to DockerHub
         if: ${{ github.event_name != 'pull_request' }}
-        uses: docker/login-action@v2
+        uses: docker/login-action@v1
         with:
           username: ${{ secrets.DOCKERHUB_USERNAME }}
           password: ${{ secrets.DOCKERHUB_TOKEN }}
 
       - name: Publish to Docker Hub
-        uses: docker/build-push-action@v3
+        uses: docker/build-push-action@v2
         with:
           context: .
           file: ./DOCKER/Dockerfile

.github/workflows/docs.yml

@@ -0,0 +1,32 @@
+name: Documentation
+# This job builds and deploys documentation to github pages.
+# It runs on every push to master, and can be manually triggered.
+on:
+  workflow_dispatch: # allow running workflow manually
+  push:
+    branches:
+      - master
+
+jobs:
+  build-and-deploy:
+    runs-on: ubuntu-latest
+    container:
+      image: tendermintdev/docker-website-deployment
+    steps:
+      - name: Checkout 🛎️
+        uses: actions/checkout@v2.3.1
+        with:
+          persist-credentials: false
+          fetch-depth: 0
+
+      - name: Install and Build 🔧
+        run: |
+          apk add rsync
+          make build-docs
+
+      - name: Deploy 🚀
+        uses: JamesIves/github-pages-deploy-action@3.7.1
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          BRANCH: gh-pages
+          FOLDER: ~/output

.github/workflows/e2e-manual.yml

@@ -1,36 +0,0 @@
-# Manually run randomly generated E2E testnets (as nightly).
-name: e2e-manual
-on:
-  workflow_dispatch:
-
-jobs:
-  e2e-nightly-test:
-    # Run parallel jobs for the listed testnet groups (must match the
-    # ./build/generator -g flag)
-    strategy:
-      fail-fast: false
-      matrix:
-        p2p: ['legacy', 'new', 'hybrid']
-        group: ['00', '01', '02', '03']
-    runs-on: ubuntu-latest
-    timeout-minutes: 60
-    steps:
-      - uses: actions/setup-go@v3
-        with:
-          go-version: '1.17'
-
-      - uses: actions/checkout@v3
-
-      - name: Build
-        working-directory: test/e2e
-        # Run make jobs in parallel, since we can't run steps in parallel.
-        run: make -j2 docker generator runner tests
-
-      - name: Generate testnets
-        working-directory: test/e2e
-        # When changing -g, also change the matrix groups above
-        run: ./build/generator -g 4 -d networks/nightly/${{ matrix.p2p }} -p ${{ matrix.p2p }}
-
-      - name: Run ${{ matrix.p2p }} p2p testnets
-        working-directory: test/e2e
-        run: ./run-multiple.sh networks/nightly/${{ matrix.p2p }}/*-group${{ matrix.group }}-*.toml

.github/workflows/e2e-nightly-34x.yml

@@ -1,76 +0,0 @@
-# Runs randomly generated E2E testnets nightly
-# on the 0.34.x release branch
-
-# !! If you change something in this file, you probably want
-# to update the e2e-nightly-master workflow as well!
-
-name: e2e-nightly-34x
-on:
-  workflow_dispatch:  # allow running workflow manually, in theory
-  schedule:
-    - cron: '0 2 * * *'
-
-jobs:
-  e2e-nightly-test:
-    # Run parallel jobs for the listed testnet groups (must match the
-    # ./build/generator -g flag)
-    strategy:
-      fail-fast: false
-      matrix:
-        group: ['00', '01']
-    runs-on: ubuntu-latest
-    timeout-minutes: 60
-    steps:
-      - uses: actions/setup-go@v3
-        with:
-          go-version: '1.17'
-
-      - uses: actions/checkout@v3
-        with:
-          ref: 'v0.34.x'
-
-      - name: Build
-        working-directory: test/e2e
-        # Run make jobs in parallel, since we can't run steps in parallel.
-        run: make -j2 docker generator runner
-
-      - name: Generate testnets
-        working-directory: test/e2e
-        # When changing -g, also change the matrix groups above
-        run: ./build/generator -g 2 -d networks/nightly
-
-      - name: Run testnets in group ${{ matrix.group }}
-        working-directory: test/e2e
-        run: ./run-multiple.sh networks/nightly/*-group${{ matrix.group }}-*.toml
-
-  e2e-nightly-fail:
-    needs: e2e-nightly-test
-    if: ${{ failure() }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Notify Slack on failure
-        uses: rtCamp/action-slack-notify@12e36fc18b0689399306c2e0b3e0f2978b7f1ee7
-        env:
-          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-          SLACK_CHANNEL: tendermint-internal
-          SLACK_USERNAME: Nightly E2E Tests
-          SLACK_ICON_EMOJI: ':skull:'
-          SLACK_COLOR: danger
-          SLACK_MESSAGE: Nightly E2E tests failed on v0.34.x
-          SLACK_FOOTER: ''
-
-  e2e-nightly-success:  # may turn this off once they seem to pass consistently
-    needs: e2e-nightly-test
-    if: ${{ success() }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Notify Slack on success
-        uses: rtCamp/action-slack-notify@12e36fc18b0689399306c2e0b3e0f2978b7f1ee7
-        env:
-          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-          SLACK_CHANNEL: tendermint-internal
-          SLACK_USERNAME: Nightly E2E Tests
-          SLACK_ICON_EMOJI: ':white_check_mark:'
-          SLACK_COLOR: good
-          SLACK_MESSAGE: Nightly E2E tests passed on v0.34.x
-          SLACK_FOOTER: ''

.github/workflows/e2e-nightly-master.yml

@@ -1,74 +0,0 @@
-# Runs randomly generated E2E testnets nightly on master
-
-# !! If you change something in this file, you probably want
-# to update the e2e-nightly-34x workflow as well!
-
-name: e2e-nightly-master
-on:
-  workflow_dispatch:  # allow running workflow manually
-  schedule:
-    - cron: '0 2 * * *'
-
-jobs:
-  e2e-nightly-test-2:
-    # Run parallel jobs for the listed testnet groups (must match the
-    # ./build/generator -g flag)
-    strategy:
-      fail-fast: false
-      matrix:
-        p2p: ['legacy', 'new', 'hybrid']
-        group: ['00', '01', '02', '03']
-    runs-on: ubuntu-latest
-    timeout-minutes: 60
-    steps:
-      - uses: actions/setup-go@v3
-        with:
-          go-version: '1.17'
-
-      - uses: actions/checkout@v3
-
-      - name: Build
-        working-directory: test/e2e
-        # Run make jobs in parallel, since we can't run steps in parallel.
-        run: make -j2 docker generator runner tests
-
-      - name: Generate testnets
-        working-directory: test/e2e
-        # When changing -g, also change the matrix groups above
-        run: ./build/generator -g 4 -d networks/nightly/${{ matrix.p2p }} -p ${{ matrix.p2p }}
-
-      - name: Run ${{ matrix.p2p }} p2p testnets in group ${{ matrix.group }}
-        working-directory: test/e2e
-        run: ./run-multiple.sh networks/nightly/${{ matrix.p2p }}/*-group${{ matrix.group }}-*.toml
-
-  e2e-nightly-fail-2:
-    needs: e2e-nightly-test-2
-    if: ${{ failure() }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Notify Slack on failure
-        uses: rtCamp/action-slack-notify@12e36fc18b0689399306c2e0b3e0f2978b7f1ee7
-        env:
-          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-          SLACK_CHANNEL: tendermint-internal
-          SLACK_USERNAME: Nightly E2E Tests
-          SLACK_ICON_EMOJI: ':skull:'
-          SLACK_COLOR: danger
-          SLACK_MESSAGE: Nightly E2E tests failed on master
-          SLACK_FOOTER: ''
-
-  e2e-nightly-success:  # may turn this off once they seem to pass consistently
-    needs: e2e-nightly-test
-    if: ${{ success() }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Notify Slack on success
-        uses: rtCamp/action-slack-notify@12e36fc18b0689399306c2e0b3e0f2978b7f1ee7
-        env:
-          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-          SLACK_CHANNEL: tendermint-internal
-          SLACK_USERNAME: Nightly E2E Tests
-          SLACK_ICON_EMOJI: ':white_check_mark:'
-          SLACK_COLOR: good
-          SLACK_MESSAGE: Nightly E2E tests passed on master
-          SLACK_FOOTER: ''

.github/workflows/e2e-nightly.yml

@@ -0,0 +1,57 @@
+# Runs randomly generated E2E testnets nightly.
+name: e2e-nightly
+on:
+  workflow_dispatch: # allow running workflow manually
+  schedule:
+    - cron: '0 2 * * *'
+
+jobs:
+  e2e-nightly-test:
+    # Run parallel jobs for the listed testnet groups (must match the
+    # ./build/generator -g flag)
+    strategy:
+      fail-fast: false
+      matrix:
+        group: ['00', '01', '02', '03']
+          # todo: expand to multiple versions after 0.35 release
+        branch: ['master', 'v0.34.x']
+    runs-on: ubuntu-latest
+    timeout-minutes: 60
+    steps:
+      - uses: actions/setup-go@v2
+        with:
+          go-version: '1.15'
+
+      - uses: actions/checkout@v2
+        with:
+          ref: ${{ matrix.branch}}
+
+      - name: Build
+        working-directory: test/e2e
+        # Run make jobs in parallel, since we can't run steps in parallel.
+        run: make -j2 docker generator runner
+
+      - name: Generate testnets
+        working-directory: test/e2e
+        # When changing -g, also change the matrix groups above
+        run: ./build/generator -g 4 -d networks/nightly
+
+      - name: Run testnets in group ${{ matrix.group }}
+        working-directory: test/e2e
+        run: ./run-multiple.sh networks/nightly/*-group${{ matrix.group }}-*.toml
+
+  e2e-nightly-fail:
+    needs: e2e-nightly-test
+    if: ${{ failure() }}
+    runs-on: ubuntu-latest
+    steps:
+      - name: Notify Slack on failure
+        uses: rtCamp/action-slack-notify@ae4223259071871559b6e9d08b24a63d71b3f0c0
+        env:
+          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+          SLACK_CHANNEL: tendermint-internal
+          SLACK_USERNAME: Nightly E2E Tests
+          SLACK_ICON_EMOJI: ':skull:'
+          SLACK_COLOR: danger
+          SLACK_MESSAGE: Nightly E2E tests failed
+          SLACK_FOOTER: ''

.github/workflows/e2e.yml

@@ -2,7 +2,7 @@ name: e2e
 # Runs the CI end-to-end test network on all pushes to master or release branches
 # and every pull request, but only if any Go files have been changed.
 on:
-  workflow_dispatch:  # allow running workflow manually
+  workflow_dispatch: # allow running workflow manually
   pull_request:
   push:
     branches:
@@ -14,11 +14,11 @@ jobs:
     runs-on: ubuntu-latest
     timeout-minutes: 15
     steps:
-      - uses: actions/setup-go@v3
+      - uses: actions/setup-go@v2
         with:
-          go-version: '1.17'
-      - uses: actions/checkout@v3
-      - uses: technote-space/get-diff-action@v6
+          go-version: '1.15'
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
         with:
           PATTERNS: |
             **/**.go
@@ -28,7 +28,7 @@ jobs:
       - name: Build
         working-directory: test/e2e
         # Run two make jobs in parallel, since we can't run steps in parallel.
-        run: make -j2 docker runner tests
+        run: make -j2 docker runner
         if: "env.GIT_DIFF != ''"
 
       - name: Run CI testnet

.github/workflows/fuzz-nightly.yml

@@ -1,36 +1,27 @@
 # Runs fuzzing nightly.
-name: Fuzz Tests
+name: fuzz-nightly
 on:
-  workflow_dispatch:  # allow running workflow manually
+  workflow_dispatch: # allow running workflow manually
   schedule:
     - cron: '0 3 * * *'
-  pull_request:
-    branches: [master]
-    paths:
-      - "test/fuzz/**/*.go"
 
 jobs:
   fuzz-nightly-test:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/setup-go@v3
+      - uses: actions/setup-go@v2
         with:
-          go-version: '1.17'
+          go-version: '1.15'
 
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
 
       - name: Install go-fuzz
         working-directory: test/fuzz
         run: go get -u github.com/dvyukov/go-fuzz/go-fuzz github.com/dvyukov/go-fuzz/go-fuzz-build
 
-      - name: Fuzz mempool-v1
+      - name: Fuzz mempool
         working-directory: test/fuzz
-        run: timeout -s SIGINT --preserve-status 10m make fuzz-mempool-v1
-        continue-on-error: true
-
-      - name: Fuzz mempool-v0
-        working-directory: test/fuzz
-        run: timeout -s SIGINT --preserve-status 10m make fuzz-mempool-v0
+        run: timeout -s SIGINT --preserve-status 10m make fuzz-mempool
         continue-on-error: true
 
       - name: Fuzz p2p-addrbook
@@ -53,35 +44,21 @@ jobs:
         run: timeout -s SIGINT --preserve-status 10m make fuzz-rpc-server
         continue-on-error: true
 
-      - name: Archive crashers
-        uses: actions/upload-artifact@v3
-        with:
-          name: crashers
-          path: test/fuzz/**/crashers
-          retention-days: 3
-
-      - name: Archive suppressions
-        uses: actions/upload-artifact@v3
-        with:
-          name: suppressions
-          path: test/fuzz/**/suppressions
-          retention-days: 3
-
       - name: Set crashers count
         working-directory: test/fuzz
-        run: echo "::set-output name=count::$(find . -type d -name 'crashers' | xargs -I % sh -c 'ls % | wc -l' | awk '{total += $1} END {print total}')"
+        run: echo "::set-output name=crashers-count::$(find . -type d -name "crashers" | xargs -I % sh -c 'ls % | wc -l' | awk '{total += $1} END {print total}')"
         id: set-crashers-count
 
     outputs:
-      crashers-count: ${{ steps.set-crashers-count.outputs.count }}
+      crashers_count: ${{ steps.set-crashers-count.outputs.crashers-count }}
 
   fuzz-nightly-fail:
     needs: fuzz-nightly-test
-    if: ${{ needs.fuzz-nightly-test.outputs.crashers-count != 0 }}
+    if: ${{ needs.set-crashers-count.outputs.crashers-count != 0 }}
     runs-on: ubuntu-latest
     steps:
       - name: Notify Slack if any crashers
-        uses: rtCamp/action-slack-notify@12e36fc18b0689399306c2e0b3e0f2978b7f1ee7
+        uses: rtCamp/action-slack-notify@ae4223259071871559b6e9d08b24a63d71b3f0c0
         env:
           SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
           SLACK_CHANNEL: tendermint-internal

.github/workflows/janitor.yml

@@ -1,16 +0,0 @@
-name: Janitor
-# Janitor cleans up previous runs of various workflows
-# To add more workflows to cancel visit https://api.github.com/repos/tendermint/tendermint/actions/workflows and find the actions name
-on:
-  pull_request:
-
-jobs:
-  cancel:
-    name: "Cancel Previous Runs"
-    runs-on: ubuntu-latest
-    timeout-minutes: 3
-    steps:
-      - uses: styfle/cancel-workflow-action@0.10.0
-        with:
-          workflow_id: 1041851,1401230,2837803
-          access_token: ${{ github.token }}

.github/workflows/jepsen.yml

@@ -1,65 +0,0 @@
-# Runs a Jepsen test - cas-register (no nemesis) by default.
-#   See inputs for various options.
-#   Repo: https://github.com/tendermint/jepsen
-#
-# If you want to test a new breaking version of Tendermint, you'll need to
-# update the Merkleeyes ABCI app and 'merkleeyesUrl' input accordingly. You can
-# upload a new tarball to
-# https://github.com/tendermint/jepsen/releases/tag/0.2.1.
-#
-# Manually triggered.
-name: jepsen
-on:
-  workflow_dispatch:
-    inputs:
-      workload:
-        description: 'Test workload to run: (cas-register | set)'
-        required: true
-        default: 'cas-register'
-      nemesis:
-        description: 'Nemesis to use: (none | clocks | single-partitions | half-partitions | ring-partitions | split-dup-validators | peekaboo-dup-validators | changing-validators | crash | truncate-tendermint | truncate-merkleeyes)'
-        required: true
-        default: 'none'
-      dupOrSuperByzValidators:
-        description: '"--dup-validators" (multiple validators share the same key) and(or) "--super-byzantine-validators" (byzantine validators have just shy of 2/3 the voting weight)'
-        required: false
-        default: ''
-      concurrency:
-        description: 'How many workers should we run? Must be an integer and >= 10, optionally followed by n (e.g. 3n) to multiply by the number of nodes.'
-        required: true
-        default: 10
-      timeLimit:
-        description: 'Excluding setup and teardown, how long should a test run for, in seconds?'
-        required: true
-        default: 60
-      tendermintUrl:
-        description: 'Where to grab the Tendermint tarball (w/ linux/amd64 binary)'
-        required: true
-        default: 'https://github.com/melekes/katas/releases/download/0.2.0/tendermint.tar.gz'
-      merkleeyesUrl:
-        description: 'Where to grab the Merkleeyes tarball (w/ linux/amd64 binary)'
-        required: true
-        default: 'https://github.com/tendermint/jepsen/releases/download/0.2.1/merkleeyes_0.1.7.tar.gz'
-
-jobs:
-  jepsen-test:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout the Jepsen repository
-        uses: actions/checkout@v3
-        with:
-          repository: 'tendermint/jepsen'
-
-      - name: Start a Jepsen cluster in background
-        working-directory: docker
-        run: ./bin/up --daemon
-
-      - name: Run the test
-        run: docker exec -i jepsen-control bash -c 'source /root/.bashrc; cd /jepsen/tendermint; lein run test --nemesis ${{ github.event.inputs.nemesis }} --workload ${{ github.event.inputs.workload }} --concurrency ${{ github.event.inputs.concurrency }} --tendermint-url ${{ github.event.inputs.tendermintUrl }} --merkleeyes-url ${{ github.event.inputs.merkleeyesUrl }} --time-limit ${{ github.event.inputs.timeLimit }} ${{ github.event.inputs.dupOrSuperByzValidators }}'
-
-      - name: Archive results
-        uses: actions/upload-artifact@v3
-        with:
-          name: results
-          path: tendermint/store/latest
-          retention-days: 3

.github/workflows/linkchecker.yml

@@ -1,12 +1,12 @@
 name: Check Markdown links
-on:
+on: 
   schedule:
     - cron: '* */24 * * *'
 jobs:
   markdown-link-check:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
-      - uses: creachadair/github-action-markdown-link-check@master
+      - uses: actions/checkout@master
+      - uses: gaurav-nelson/github-action-markdown-link-check@1.0.12
         with:
           folder-path: "docs"

.github/workflows/lint.yaml

@@ -0,0 +1,29 @@
+name: Lint
+# Lint runs golangci-lint over the entire Tendermint repository
+# This workflow is run on every pull request and push to master
+# The `golangci` job will pass without running if no *.{go, mod, sum} files have been modified.
+on:
+  pull_request:
+  push:
+    branches:
+      - master
+jobs:
+  golangci:
+    name: golangci-lint
+    runs-on: ubuntu-latest
+    timeout-minutes: 8
+    steps:
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
+        with:
+          PATTERNS: |
+            **/**.go
+            go.mod
+            go.sum
+      - uses: golangci/golangci-lint-action@v2.3.0
+        with:
+          # Required: the version of golangci-lint is required and must be specified without patch version: we always use the latest patch version.
+          version: v1.31
+          args: --timeout 10m
+          github-token: ${{ secrets.github_token }}
+        if: env.GIT_DIFF

.github/workflows/lint.yml

@@ -1,38 +0,0 @@
-name: Golang Linter
-# Lint runs golangci-lint over the entire Tendermint repository.
-#
-# This workflow is run on every pull request and push to master.
-#
-# The `golangci` job will pass without running if no *.{go, mod, sum}
-# files have been modified.
-
-on:
-  pull_request:
-  push:
-    branches:
-      - master
-jobs:
-  golangci:
-    name: golangci-lint
-    runs-on: ubuntu-latest
-    timeout-minutes: 8
-    steps:
-      - uses: actions/checkout@v3
-      - uses: actions/setup-go@v3
-        with:
-          go-version: '^1.17'
-      - uses: technote-space/get-diff-action@v6
-        with:
-          PATTERNS: |
-            **/**.go
-            go.mod
-            go.sum
-      - uses: golangci/golangci-lint-action@v3
-        with:
-          # Required: the version of golangci-lint is required and
-          # must be specified without patch version: we always use the
-          # latest patch version.
-          version: v1.45
-          args: --timeout 10m
-          github-token: ${{ secrets.github_token }}
-        if: env.GIT_DIFF

.github/workflows/linter.yml

@@ -11,7 +11,6 @@ on:
     branches: [master]
     paths:
       - "**.md"
-      - "**.yml"
 
 jobs:
   build:
@@ -19,14 +18,14 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout Code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v2
       - name: Lint Code Base
-        uses: docker://github/super-linter:v4
+        uses: docker://github/super-linter:v3
         env:
+          LINTER_RULES_PATH: .
           VALIDATE_ALL_CODEBASE: true
           DEFAULT_BRANCH: master
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           VALIDATE_MD: true
-          VALIDATE_OPENAPI: true
+          VALIDATE_OPAENAPI: true
           VALIDATE_YAML: true
-          YAML_CONFIG_FILE: yaml-lint.yml

.github/workflows/markdown-links.yml

@@ -1,23 +0,0 @@
-name: Check Markdown links
-
-on:
-  push:
-    branches:
-      - master
-  pull_request:
-    branches: [master]
-
-jobs:
-  markdown-link-check:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - uses: technote-space/get-diff-action@v6
-        with:
-          PATTERNS: |
-            **/**.md
-      - uses: creachadair/github-action-markdown-link-check@master
-        with:
-          check-modified-files-only: 'yes'
-          config-file: '.md-link-check.json'
-        if: env.GIT_DIFF

.github/workflows/proto-check.yml

@@ -1,29 +0,0 @@
-name: Proto Check
-# Protobuf runs buf (https://buf.build/) lint and check-breakage
-# This workflow is only run when a file in the proto directory
-# has been modified.
-on:
-  workflow_dispatch: # allow running workflow manually
-  pull_request:
-    paths:
-      - "proto/**"
-jobs:
-  proto-lint:
-    runs-on: ubuntu-latest
-    timeout-minutes: 4
-    steps:
-      - uses: actions/checkout@v2.4.0
-      - uses: bufbuild/buf-setup-action@v1.6.0
-      - uses: bufbuild/buf-lint-action@v1
-        with:
-          input: 'proto'
-
-  proto-breakage:
-    runs-on: ubuntu-latest
-    timeout-minutes: 4
-    steps:
-      - uses: actions/checkout@v2.4.0
-      - uses: bufbuild/buf-setup-action@v1.6.0
-      - uses: bufbuild/buf-breaking-action@v1
-        with:
-          against: 'https://github.com/tendermint/tendermint.git#branch=v0.35.x'

.github/workflows/proto-docker.yml

@@ -16,7 +16,7 @@ jobs:
   build:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@master
       - name: Prepare
         id: prep
         run: |
@@ -34,16 +34,16 @@ jobs:
           echo ::set-output name=tags::${TAGS}
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
+        uses: docker/setup-buildx-action@v1
 
       - name: Login to DockerHub
-        uses: docker/login-action@v2
+        uses: docker/login-action@v1
         with:
           username: ${{ secrets.DOCKERHUB_USERNAME }}
           password: ${{ secrets.DOCKERHUB_TOKEN }}
 
       - name: Publish to Docker Hub
-        uses: docker/build-push-action@v3
+        uses: docker/build-push-action@v2
         with:
           context: ./tools/proto
           file: ./tools/proto/Dockerfile

.github/workflows/proto.yml

@@ -0,0 +1,23 @@
+name: Protobuf
+# Protobuf runs buf (https://buf.build/) lint and check-breakage
+# This workflow is only run when a .proto file has been modified
+on:
+  workflow_dispatch: # allow running workflow manually
+  pull_request:
+    paths:
+      - "**.proto"
+jobs:
+  proto-lint:
+    runs-on: ubuntu-latest
+    timeout-minutes: 4
+    steps:
+      - uses: actions/checkout@master
+      - name: lint
+        run: make proto-lint
+  proto-breakage:
+    runs-on: ubuntu-latest
+    timeout-minutes: 4
+    steps:
+      - uses: actions/checkout@master
+      - name: check-breakage
+        run: make proto-check-breaking-ci

.github/workflows/release.yml

@@ -2,35 +2,36 @@ name: "Release"
 
 on:
   push:
-    branches:
+    branches: 
       - "RC[0-9]/**"
     tags:
-      - "v[0-9]+.[0-9]+.[0-9]+"  # Push events to matching v*, i.e. v1.0, v20.15.10
+      - "v[0-9]+.[0-9]+.[0-9]+" # Push events to matching v*, i.e. v1.0, v20.15.10
 
 jobs:
   goreleaser:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v2
         with:
           fetch-depth: 0
 
-      - uses: actions/setup-go@v3
+      - uses: actions/setup-go@v2
         with:
-          go-version: '1.17'
+          go-version: '1.15'
+
+      - run: echo https://github.com/tendermint/tendermint/blob/${GITHUB_REF#refs/tags/}/CHANGELOG.md#${GITHUB_REF#refs/tags/} > ../release_notes.md 
+        if: startsWith(github.ref, 'refs/tags/')
 
       - name: Build
-        uses: goreleaser/goreleaser-action@v3
+        uses: goreleaser/goreleaser-action@v2
         if: ${{ github.event_name == 'pull_request' }}
         with:
           version: latest
           args: build --skip-validate   # skip validate skips initial sanity checks in order to be able to fully run
 
-      - run: echo https://github.com/tendermint/tendermint/blob/${GITHUB_REF#refs/tags/}/CHANGELOG.md#${GITHUB_REF#refs/tags/} > ../release_notes.md
-
       - name: Release
-        uses: goreleaser/goreleaser-action@v3
+        uses: goreleaser/goreleaser-action@v2
         if: startsWith(github.ref, 'refs/tags/')
         with:
           version: latest

.github/workflows/stale.yml

@@ -7,14 +7,12 @@ jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v5
+      - uses: actions/stale@v3
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           stale-pr-message: "This pull request has been automatically marked as stale because it has not had
     recent activity. It will be closed if no further activity occurs. Thank you
     for your contributions."
-          days-before-stale: -1
-          days-before-close: -1
-          days-before-pr-stale: 10
-          days-before-pr-close: 4
+          days-before-stale: 10
+          days-before-close: 4
           exempt-pr-labels: "S:wip"

.github/workflows/tests.yml

@@ -1,75 +1,146 @@
-name: Test
+name: Tests
+# Tests runs different tests (test_abci_apps, test_abci_cli, test_apps)
+# This workflow runs on every push to master or release branch and  every pull requests
+# All jobs will pass without running if no *{.go, .mod, .sum} files have been modified
 on:
   pull_request:
   push:
-    paths:
-      - "**.go"
     branches:
       - master
       - release/**
 
 jobs:
-  tests:
+  cleanup-runs:
     runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        part: ["00", "01", "02", "03", "04", "05"]
     steps:
-      - uses: actions/setup-go@v3
-        with:
-          go-version: "1.17"
-      - uses: actions/checkout@v3
-      - uses: technote-space/get-diff-action@v6
-        with:
-          PATTERNS: |
-            **/**.go
-            "!test/"
-            go.mod
-            go.sum
-            Makefile
-      - name: Run Go Tests
-        run: |
-          make test-group-${{ matrix.part }} NUM_SPLIT=6
-        if: env.GIT_DIFF
-      - uses: actions/upload-artifact@v3
-        with:
-          name: "${{ github.sha }}-${{ matrix.part }}-coverage"
-          path: ./build/${{ matrix.part }}.profile.out
+      - uses: rokroskar/workflow-run-cleanup-action@master
+        env:
+          GITHUB_TOKEN: "${{ secrets.GITHUB_TOKEN }}"
+    if: "!startsWith(github.ref, 'refs/tags/') && github.ref != 'refs/heads/master'"
 
-  upload-coverage-report:
+  build:
+    name: Build
     runs-on: ubuntu-latest
-    needs: tests
+    timeout-minutes: 5
     steps:
-      - uses: actions/checkout@v3
-      - uses: technote-space/get-diff-action@v6
+      - uses: actions/setup-go@v2
+        with:
+          go-version: "1.15"
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
         with:
           PATTERNS: |
             **/**.go
-            "!test/"
             go.mod
             go.sum
-            Makefile
-      - uses: actions/download-artifact@v3
+      - name: install
+        run: make install install_abci
+        if: "env.GIT_DIFF != ''"
+      - uses: actions/cache@v2.1.3
         with:
-          name: "${{ github.sha }}-00-coverage"
+          path: ~/go/pkg/mod
+          key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
+          restore-keys: |
+            ${{ runner.os }}-go-
         if: env.GIT_DIFF
-      - uses: actions/download-artifact@v3
+      # Cache binaries for use by other jobs
+      - uses: actions/cache@v2.1.3
         with:
-          name: "${{ github.sha }}-01-coverage"
+          path: ~/go/bin
+          key: ${{ runner.os }}-${{ github.sha }}-tm-binary
         if: env.GIT_DIFF
-      - uses: actions/download-artifact@v3
+
+  test_abci_apps:
+    runs-on: ubuntu-latest
+    needs: build
+    timeout-minutes: 5
+    steps:
+      - uses: actions/setup-go@v2
         with:
-          name: "${{ github.sha }}-02-coverage"
-        if: env.GIT_DIFF
-      - uses: actions/download-artifact@v3
+          go-version: "1.15"
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
         with:
-          name: "${{ github.sha }}-03-coverage"
-        if: env.GIT_DIFF
-      - run: |
-          cat ./*profile.out | grep -v "mode: set" >> coverage.txt
-        if: env.GIT_DIFF
-      - uses: codecov/codecov-action@v3
+          PATTERNS: |
+            **/**.go
+            go.mod
+            go.sum
+      - uses: actions/cache@v2.1.3
         with:
-          file: ./coverage.txt
+          path: ~/go/pkg/mod
+          key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
+          restore-keys: |
+            ${{ runner.os }}-go-
+        if: env.GIT_DIFF
+      - uses: actions/cache@v2.1.3
+        with:
+          path: ~/go/bin
+          key: ${{ runner.os }}-${{ github.sha }}-tm-binary
+        if: env.GIT_DIFF
+      - name: test_abci_apps
+        run: abci/tests/test_app/test.sh
+        shell: bash
+        if: env.GIT_DIFF
+
+  test_abci_cli:
+    runs-on: ubuntu-latest
+    needs: build
+    timeout-minutes: 5
+    steps:
+      - uses: actions/setup-go@v2
+        with:
+          go-version: "1.15"
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
+        with:
+          PATTERNS: |
+            **/**.go
+            go.mod
+            go.sum
+      - uses: actions/cache@v2.1.3
+        with:
+          path: ~/go/pkg/mod
+          key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
+          restore-keys: |
+            ${{ runner.os }}-go-
+        if: env.GIT_DIFF
+      - uses: actions/cache@v2.1.3
+        with:
+          path: ~/go/bin
+          key: ${{ runner.os }}-${{ github.sha }}-tm-binary
+        if: env.GIT_DIFF
+      - run: abci/tests/test_cli/test.sh
+        shell: bash
+        if: env.GIT_DIFF
+
+  test_apps:
+    runs-on: ubuntu-latest
+    needs: build
+    timeout-minutes: 5
+    steps:
+      - uses: actions/setup-go@v2
+        with:
+          go-version: "1.15"
+      - uses: actions/checkout@v2
+      - uses: technote-space/get-diff-action@v4
+        with:
+          PATTERNS: |
+            **/**.go
+            go.mod
+            go.sum
+      - uses: actions/cache@v2.1.3
+        with:
+          path: ~/go/pkg/mod
+          key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
+          restore-keys: |
+            ${{ runner.os }}-go-
+        if: env.GIT_DIFF
+      - uses: actions/cache@v2.1.3
+        with:
+          path: ~/go/bin
+          key: ${{ runner.os }}-${{ github.sha }}-tm-binary
+        if: env.GIT_DIFF
+      - name: test_apps
+        run: test/app/test.sh
+        shell: bash
         if: env.GIT_DIFF

.gitignore

@@ -10,12 +10,12 @@
 .idea/
 .revision
 .tendermint
-.tendermint-light
+.tendermint-lite
 .terraform
 .vagrant
 .vendor-new/
 .vscode/
-abci/abci-cli
+abci-cli
 addrbook.json
 artifacts/*
 build/*
@@ -24,8 +24,6 @@ docs/.vuepress/dist
 docs/_build
 docs/dist
 docs/node_modules/
-docs/spec
-docs/.vuepress/public/rpc
 index.html.md
 libs/pubsub/query/fuzz_test/output
 profile\.out
@@ -37,20 +35,13 @@ shunit2
 terraform.tfstate
 terraform.tfstate.backup
 terraform.tfstate.d
-test/app/grpc_client
 test/e2e/build
 test/e2e/networks/*/
 test/logs
+test/maverick/maverick
 test/p2p/data/
 vendor
 test/fuzz/**/corpus
 test/fuzz/**/crashers
 test/fuzz/**/suppressions
 test/fuzz/**/*.zip
-*.aux
-*.bbl
-*.blg
-*.pdf
-*.gz
-*.dvi
-.idea

.golangci.yml

@@ -1,59 +1,61 @@
 linters:
   enable:
-    - asciicheck
     - bodyclose
     - deadcode
     - depguard
     - dogsled
     - dupl
     - errcheck
-    - exportloopref
     # - funlen
     # - gochecknoglobals
     # - gochecknoinits
-    # - gocognit
     - goconst
-    # - gocritic
+    - gocritic
     # - gocyclo
     # - godox
     - gofmt
     - goimports
-    - revive
+    - golint
     - gosec
     - gosimple
     - govet
     - ineffassign
     # - interfacer
-    # - lll
-    # - maligned
+    - lll
     - misspell
+    # - maligned
     - nakedret
-    - nolintlint
     - prealloc
+    - scopelint
     - staticcheck
     - structcheck
     - stylecheck
-    # - typecheck
+    - typecheck
     - unconvert
     # - unparam
     - unused
     - varcheck
     # - whitespace
     # - wsl
+    # - gocognit
+    - nolintlint
 
 issues:
   exclude-rules:
     - path: _test\.go
       linters:
         - gosec
+    - linters:
+        - lll
+      source: "https://"
   max-same-issues: 50
 
 linters-settings:
   dogsled:
     max-blank-identifiers: 3
-  golint:
-    min-confidence: 0
   maligned:
     suggest-new: true
-  misspell:
-    locale: US
+  # govet:
+  #   check-shadowing: true
+  golint:
+    min-confidence: 0

.goreleaser.yml

@@ -1,4 +1,4 @@
-project_name: tendermint
+project_name: Tendermint
 
 env:
   # Require use of Go modules.
@@ -29,8 +29,8 @@ release:
 
 archives:
   - files:
-      - LICENSE
-      - README.md
-      - UPGRADING.md
-      - SECURITY.md
-      - CHANGELOG.md
+    - LICENSE
+    - README.md
+    - UPGRADING.md
+    - SECURITY.md
+    - CHANGELOG.md

.markdownlint.yml

@@ -1,11 +0,0 @@
-default: true
-MD001: false
-MD007: { indent: 4 }
-MD013: false
-MD024: { siblings_only: true }
-MD025: false
-MD033: false
-MD036: false
-MD010: false
-MD012: false
-MD028: false

CHANGELOG.md

@@ -1,539 +1,21 @@
 # Changelog
 
-Friendly reminder: We have a [bug bounty program](https://hackerone.com/cosmos).
-
-## v0.35.9
-
-July 20, 2022
-
-This release fixes a deadlock that could occur in some cases when using the
-priority mempool with the ABCI socket client.
-
-### BUG FIXES
-
-- [mempool] [\#9030](https://github.com/tendermint/tendermint/pull/9030) rework lock discipline to mitigate callback deadlocks (@creachadair)
-
-## v0.35.8
-
-July 12, 2022
-
-Special thanks to external contributors on this release: @joeabbey
-
-This release fixes an unbounded heap growth issue in the implementation of the
-priority mempool, as well as some configuration, logging, and peer dialing
-improvements in the non-legacy p2p stack. It also adds a new opt-in
-"simple-priority" value for the `p2p.queue-type` setting, that should improve
-gossip performance for non-legacy peer networks.
-
-### BREAKING CHANGES
-
-- CLI/RPC/Config
-
-   - [node] [\#8902](https://github.com/tendermint/tendermint/pull/8902) Always start blocksync and avoid misconfiguration (@tychoish)
-
-### FEATURES
-
-- [cli] [\#8675](https://github.com/tendermint/tendermint/pull/8675) Add command to force compact goleveldb databases (@cmwaters)
-
-### IMPROVEMENTS
-
-- [p2p] [\#8914](https://github.com/tendermint/tendermint/pull/8914) [\#8875](https://github.com/tendermint/tendermint/pull/8875) Improvements to peer dialing (backported). (@tychoish)
-- [p2p] [\#8820](https://github.com/tendermint/tendermint/pull/8820) add eviction metrics and cleanup dialing error handling (backport #8819) (@tychoish)
-- [logging] [\#8896](https://github.com/tendermint/tendermint/pull/8896) Do not pre-process log results (backport #8895). (@tychoish)
-- [p2p] [\#8956](https://github.com/tendermint/tendermint/pull/8956) Simpler priority queue (backport #8929). (@tychoish)
-
-### BUG FIXES
-
-- [mempool] [\#8944](https://github.com/tendermint/tendermint/pull/8944) Fix unbounded heap growth in the priority mempool. (@creachadair)
-- [p2p] [\#8869](https://github.com/tendermint/tendermint/pull/8869) Set empty timeouts to configed values. (backport #8847). (@williambanfield)
-
-
-## v0.35.7
-
-June 16, 2022
-
-### BUG FIXES
-
-- [p2p] [\#8692](https://github.com/tendermint/tendermint/pull/8692) scale the number of stored peers by the configured maximum connections (#8684)
-- [rpc] [\#8715](https://github.com/tendermint/tendermint/pull/8715) always close http bodies (backport #8712)
-- [p2p] [\#8760](https://github.com/tendermint/tendermint/pull/8760) accept should not abort on first error (backport #8759)
-
-### BREAKING CHANGES
-
-- P2P Protocol
-
-  - [p2p] [\#8737](https://github.com/tendermint/tendermint/pull/8737) Introduce "inactive" peer label to avoid re-dialing incompatible peers. (@tychoish)
-  - [p2p] [\#8737](https://github.com/tendermint/tendermint/pull/8737) Increase frequency of dialing attempts to reduce latency for peer acquisition. (@tychoish)
-  - [p2p] [\#8737](https://github.com/tendermint/tendermint/pull/8737) Improvements to peer scoring and sorting to gossip a greater variety of peers during PEX. (@tychoish)
-  - [p2p] [\#8737](https://github.com/tendermint/tendermint/pull/8737) Track incoming and outgoing peers separately to ensure more peer slots open for incoming connections. (@tychoish)
-
-## v0.35.6
-
-June 3, 2022
-
-### FEATURES
-
-- [migrate] [\#8672](https://github.com/tendermint/tendermint/pull/8672) provide function for database production (backport #8614) (@tychoish)
-
-### BUG FIXES
-
-- [consensus] [\#8651](https://github.com/tendermint/tendermint/pull/8651) restructure peer catchup sleep (@tychoish)
-- [pex] [\#8657](https://github.com/tendermint/tendermint/pull/8657) align max address thresholds (@cmwaters)
-- [cmd] [\#8668](https://github.com/tendermint/tendermint/pull/8668) don't used global config for reset commands (@cmwaters)
-- [p2p] [\#8681](https://github.com/tendermint/tendermint/pull/8681) shed peers from store from other networks (backport #8678) (@tychoish)
-
-## v0.35.5
-
-May 26, 2022
-
-### BUG FIXES
-
-- [p2p] [\#8371](https://github.com/tendermint/tendermint/pull/8371) fix setting in con-tracker (backport #8370) (@tychoish)
-- [blocksync] [\#8496](https://github.com/tendermint/tendermint/pull/8496) validate block against state before persisting it to disk (@cmwaters)
-- [statesync] [\#8494](https://github.com/tendermint/tendermint/pull/8494) avoid potential race (@tychoish)
-- [keymigrate] [\#8467](https://github.com/tendermint/tendermint/pull/8467) improve filtering for legacy transaction hashes (backport #8466) (@creachadair)
-- [rpc] [\#8594](https://github.com/tendermint/tendermint/pull/8594) fix encoding of block_results responses (@creachadair)
-
-## v0.35.4
-
-April 18, 2022
-
-Special thanks to external contributors on this release: @firelizzard18
-
-### FEATURES
-
-- [cli] [\#8300](https://github.com/tendermint/tendermint/pull/8300) Add a tool to update old config files to the latest version [backport [\#8281](https://github.com/tendermint/tendermint/pull/8281)]. (@creachadair)
-
-### IMPROVEMENTS
-
-### BUG FIXES
-
-- [cli] [\#8294](https://github.com/tendermint/tendermint/pull/8294) keymigrate: ensure block hash keys are correctly translated. (@creachadair)
-- [cli] [\#8352](https://github.com/tendermint/tendermint/pull/8352) keymigrate: ensure transaction hash keys are correctly translated. (@creachadair)
-
-## v0.35.3
-
-April 8, 2022
-
-### FEATURES
-
-- [cli] [\#8081](https://github.com/tendermint/tendermint/pull/8081) add a safer-to-use `reset-state` command. (@marbar3778)
-
-### IMPROVEMENTS
-
-- [consensus] [\#8138](https://github.com/tendermint/tendermint/pull/8138) change lock handling in reactor and handleMsg for RoundState. (@williambanfield)
-
-### BUG FIXES
-
-- [cli] [\#8276](https://github.com/tendermint/tendermint/pull/8276) scmigrate: ensure target key is correctly renamed. (@creachadair)
-
-## v0.35.2
-
-February 28, 2022
-
-Special thanks to external contributors on this release: @ashcherbakov, @yihuang, @waelsy123
-
-### IMPROVEMENTS
-
-- [consensus] [\#7875](https://github.com/tendermint/tendermint/pull/7875) additional timing metrics. (@williambanfield)
-
-### BUG FIXES
-
-- [abci] [\#7990](https://github.com/tendermint/tendermint/pull/7990) revert buffer limit change. (@williambanfield)
-- [cli] [#7837](https://github.com/tendermint/tendermint/pull/7837) fix app hash in state rollback. (@yihuang)
-- [cli] [\#7869](https://github.com/tendermint/tendermint/pull/7869) Update unsafe-reset-all command to match release v35. (waelsy123)
-- [light] [\#7640](https://github.com/tendermint/tendermint/pull/7640) Light Client: fix absence proof verification (@ashcherbakov)
-- [light] [\#7641](https://github.com/tendermint/tendermint/pull/7641) Light Client: fix querying against the latest height (@ashcherbakov)
-- [mempool] [\#7718](https://github.com/tendermint/tendermint/pull/7718) return duplicate tx errors more consistently. (@tychoish)
-- [rpc] [\#7744](https://github.com/tendermint/tendermint/pull/7744) fix layout of endpoint list. (@creachadair)
-- [statesync] [\#7886](https://github.com/tendermint/tendermint/pull/7886) assert app version matches. (@cmwaters)
-
-## v0.35.1
-
-January 26, 2022
-
-Special thanks to external contributors on this release: @altergui, @odeke-em,
-@thanethomson
-
-### BREAKING CHANGES
-
-- CLI/RPC/Config
-
-  - [config] [\#7276](https://github.com/tendermint/tendermint/pull/7276) rpc: Add experimental config params to allow for subscription buffer size control (@thanethomson).
-
-- P2P Protocol
-
-  - [p2p] [\#7265](https://github.com/tendermint/tendermint/pull/7265) Peer manager reduces peer score for each failed dial attempts for peers that have not successfully dialed. (@tychoish)
-  - [p2p] [\#7594](https://github.com/tendermint/tendermint/pull/7594) always advertise self, to enable mutual address discovery. (@altergui)
-
-### FEATURES
-
-- [rpc] [\#7270](https://github.com/tendermint/tendermint/pull/7270) Add `header` and `header_by_hash` RPC Client queries. (@fedekunze) (@cmwaters)
-
-### IMPROVEMENTS
-
-- [internal/protoio] [\#7325](https://github.com/tendermint/tendermint/pull/7325) Optimized `MarshalDelimited` by inlining the common case and using a `sync.Pool` in the worst case. (@odeke-em)
-- [\#7338](https://github.com/tendermint/tendermint/pull/7338) pubsub: Performance improvements for the event query API (backport of #7319) (@creachadair)
-- [\#7252](https://github.com/tendermint/tendermint/pull/7252) Add basic metrics to the indexer package. (@creachadair)
-- [\#7338](https://github.com/tendermint/tendermint/pull/7338) Performance improvements for the event query API. (@creachadair)
-
-### BUG FIXES
-
-- [\#7310](https://github.com/tendermint/tendermint/issues/7310) pubsub: Report a non-nil error when shutting down (fixes #7306).
-- [\#7355](https://github.com/tendermint/tendermint/pull/7355) Fix incorrect tests using the PSQL sink. (@creachadair)
-- [\#7683](https://github.com/tendermint/tendermint/pull/7683) rpc: check error code for broadcast_tx_commit. (@tychoish)
-
-## v0.35.0
-
-November 4, 2021
-
-Special thanks to external contributors on this release: @JayT106,
-@bipulprasad, @alessio, @Yawning, @silasdavis, @cuonglm, @tanyabouman,
-@JoeKash, @githubsands, @jeebster, @crypto-facs, @liamsi, and @gotjoshua
-
-### FEATURES
-
-- [cli] [#7033](https://github.com/tendermint/tendermint/pull/7033) Add a `rollback` command to rollback to the previous tendermint state in the event of an incorrect app hash. (@cmwaters)
-- [config] [\#7174](https://github.com/tendermint/tendermint/pull/7174) expose ability to write config to arbitrary paths. (@tychoish)
-- [mempool, rpc] [\#7065](https://github.com/tendermint/tendermint/pull/7065) add removetx rpc method (backport of #7047) (@tychoish).
-- [\#6982](https://github.com/tendermint/tendermint/pull/6982) tendermint binary has built-in suppport for running the e2e application (with state sync support) (@cmwaters).
-- [config] Add `--mode` flag and config variable. See [ADR-52](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-052-tendermint-mode.md) @dongsam
-- [rpc] [\#6329](https://github.com/tendermint/tendermint/pull/6329) Don't cap page size in unsafe mode (@gotjoshua, @cmwaters)
-- [pex] [\#6305](https://github.com/tendermint/tendermint/pull/6305) v2 pex reactor with backwards compatability. Introduces two new pex messages to
-  accomodate for the new p2p stack. Removes the notion of seeds and crawling. All peer
-  exchange reactors behave the same. (@cmwaters)
-- [crypto] [\#6376](https://github.com/tendermint/tendermint/pull/6376) Enable sr25519 as a validator key type
-- [mempool] [\#6466](https://github.com/tendermint/tendermint/pull/6466) Introduction of a prioritized mempool. (@alexanderbez)
-  - `Priority` and `Sender` have been introduced into the `ResponseCheckTx` type, where the `priority` will determine the prioritization of
-  the transaction when a proposer reaps transactions for a block proposal. The `sender` field acts as an index.
-  - Operators may toggle between the legacy mempool reactor, `v0`, and the new prioritized reactor, `v1`, by setting the
-  `mempool.version` configuration, where `v1` is the default configuration.
-  - Applications that do not specify a priority, i.e. zero, will have transactions reaped by the order in which they are received by the node.
-  - Transactions are gossiped in FIFO order as they are in `v0`.
-- [config/indexer] [\#6411](https://github.com/tendermint/tendermint/pull/6411) Introduce support for custom event indexing data sources, specifically PostgreSQL. (@JayT106)
-- [blocksync/event] [\#6619](https://github.com/tendermint/tendermint/pull/6619) Emit blocksync status event when switching consensus/blocksync (@JayT106)
-- [statesync/event] [\#6700](https://github.com/tendermint/tendermint/pull/6700) Emit statesync status start/end event (@JayT106)
-- [inspect] [\#6785](https://github.com/tendermint/tendermint/pull/6785) Add a new `inspect` command for introspecting the state and block store of a crashed tendermint node. (@williambanfield)
-
-### BUG FIXES
-
-- [\#7106](https://github.com/tendermint/tendermint/pull/7106) Revert mutex change to ABCI Clients (@tychoish).
-- [\#7142](https://github.com/tendermint/tendermint/pull/7142) mempool: remove panic when recheck-tx was not sent to ABCI application (@williambanfield).
-- [consensus]: [\#7060](https://github.com/tendermint/tendermint/pull/7060)
-  wait until peerUpdates channel is closed to close remaining peers (@williambanfield)
-- [privval] [\#5638](https://github.com/tendermint/tendermint/pull/5638) Increase read/write timeout to 5s and calculate ping interval based on it (@JoeKash)
-- [evidence] [\#6375](https://github.com/tendermint/tendermint/pull/6375) Fix bug with inconsistent LightClientAttackEvidence hashing (cmwaters)
-- [rpc] [\#6507](https://github.com/tendermint/tendermint/pull/6507) Ensure RPC client can handle URLs without ports (@JayT106)
-- [statesync] [\#6463](https://github.com/tendermint/tendermint/pull/6463) Adds Reverse Sync feature to fetch historical light blocks after state sync in order to verify any evidence (@cmwaters)
-- [blocksync] [\#6590](https://github.com/tendermint/tendermint/pull/6590) Update the metrics during blocksync (@JayT106)
-
-### BREAKING CHANGES
-
-- Go API
-
-  - [crypto/armor]: [\#6963](https://github.com/tendermint/tendermint/pull/6963) remove package which is unused, and based on
-    deprecated fundamentals. Downstream users should maintain this
-    library. (@tychoish)
-  - [state] [store] [proxy] [rpc/core]: [\#6937](https://github.com/tendermint/tendermint/pull/6937) move packages to
-    `internal` to prevent consumption of these internal APIs by
-    external users. (@tychoish)
-  - [pubsub] [\#6634](https://github.com/tendermint/tendermint/pull/6634) The `Query#Matches` method along with other pubsub methods, now accepts a `[]abci.Event` instead of `map[string][]string`. (@alexanderbez)
-  - [p2p] [\#6618](https://github.com/tendermint/tendermint/pull/6618) [\#6583](https://github.com/tendermint/tendermint/pull/6583) Move `p2p.NodeInfo`, `p2p.NodeID` and `p2p.NetAddress` into `types` to support use in external packages. (@tychoish)
-  - [node] [\#6540](https://github.com/tendermint/tendermint/pull/6540) Reduce surface area of the `node` package by making most of the implementation details private. (@tychoish)
-  - [p2p] [\#6547](https://github.com/tendermint/tendermint/pull/6547) Move the entire `p2p` package and all reactor implementations into `internal`.  (@tychoish)
-  - [libs/log] [\#6534](https://github.com/tendermint/tendermint/pull/6534) Remove the existing custom Tendermint logger backed by go-kit. The logging interface, `Logger`, remains. Tendermint still provides a default logger backed by the performant zerolog logger. (@alexanderbez)
-  - [libs/time] [\#6495](https://github.com/tendermint/tendermint/pull/6495) Move types/time to libs/time to improve consistency. (@tychoish)
-  - [mempool] [\#6529](https://github.com/tendermint/tendermint/pull/6529) The `Context` field has been removed from the `TxInfo` type. `CheckTx` now requires a `Context` argument. (@alexanderbez)
-  - [abci/client, proxy] [\#5673](https://github.com/tendermint/tendermint/pull/5673) `Async` funcs return an error, `Sync` and `Async` funcs accept `context.Context` (@melekes)
-  - [p2p] Remove unused function `MakePoWTarget`. (@erikgrinaker)
-  - [libs/bits] [\#5720](https://github.com/tendermint/tendermint/pull/5720) Validate `BitArray` in `FromProto`, which now returns an error (@melekes)
-  - [proto/p2p] Rename `DefaultNodeInfo` and `DefaultNodeInfoOther` to `NodeInfo` and `NodeInfoOther` (@erikgrinaker)
-  - [proto/p2p] Rename `NodeInfo.default_node_id` to `node_id` (@erikgrinaker)
-  - [libs/os] Kill() and {Must,}{Read,Write}File() functions have been removed. (@alessio)
-  - [store] [\#5848](https://github.com/tendermint/tendermint/pull/5848) Remove block store state in favor of using the db iterators directly (@cmwaters)
-  - [state] [\#5864](https://github.com/tendermint/tendermint/pull/5864) Use an iterator when pruning state (@cmwaters)
-  - [types] [\#6023](https://github.com/tendermint/tendermint/pull/6023) Remove `tm2pb.Header`, `tm2pb.BlockID`, `tm2pb.PartSetHeader` and `tm2pb.NewValidatorUpdate`.
-	- Each of the above types has a `ToProto` and `FromProto` method or function which replaced this logic.
-  - [light] [\#6054](https://github.com/tendermint/tendermint/pull/6054) Move `MaxRetryAttempt` option from client to provider.
-	- `NewWithOptions` now sets the max retry attempts and timeouts (@cmwaters)
-  - [all] [\#6077](https://github.com/tendermint/tendermint/pull/6077) Change spelling from British English to American (@cmwaters)
-	- Rename "Subscription.Cancelled()" to "Subscription.Canceled()" in libs/pubsub
-	- Rename "behaviour" pkg to "behavior" and internalized it in blocksync v2
-  - [rpc/client/http] [\#6176](https://github.com/tendermint/tendermint/pull/6176) Remove `endpoint` arg from `New`, `NewWithTimeout` and `NewWithClient` (@melekes)
-  - [rpc/client/http] [\#6176](https://github.com/tendermint/tendermint/pull/6176) Unexpose `WSEvents` (@melekes)
-  - [rpc/jsonrpc/client/ws_client] [\#6176](https://github.com/tendermint/tendermint/pull/6176) `NewWS` no longer accepts options (use `NewWSWithOptions` and `OnReconnect` funcs to configure the client) (@melekes)
-  - [internal/libs] [\#6366](https://github.com/tendermint/tendermint/pull/6366) Move `autofile`, `clist`,`fail`,`flowrate`, `protoio`, `sync`, `tempfile`, `test` and `timer` lib packages to an internal folder
-  - [libs/rand] [\#6364](https://github.com/tendermint/tendermint/pull/6364) Remove most of libs/rand in favour of standard lib's `math/rand` (@liamsi)
-  - [mempool] [\#6466](https://github.com/tendermint/tendermint/pull/6466) The original mempool reactor has been versioned as `v0` and moved to a sub-package under the root `mempool` package.
-	Some core types have been kept in the `mempool` package such as `TxCache` and it's implementations, the `Mempool` interface itself
-	and `TxInfo`. (@alexanderbez)
-  - [crypto/sr25519] [\#6526](https://github.com/tendermint/tendermint/pull/6526) Do not re-execute the Ed25519-style key derivation step when doing signing and verification.  The derivation is now done once and only once.  This breaks `sr25519.GenPrivKeyFromSecret` output compatibility. (@Yawning)
-  - [types] [\#6627](https://github.com/tendermint/tendermint/pull/6627) Move `NodeKey` to types to make the type public.
-  - [config] [\#6627](https://github.com/tendermint/tendermint/pull/6627) Extend `config` to contain methods `LoadNodeKeyID` and `LoadorGenNodeKeyID`
-  - [blocksync] [\#6755](https://github.com/tendermint/tendermint/pull/6755) Rename `FastSync` and `Blockchain` package to `BlockSync` (@cmwaters)
-
-- CLI/RPC/Config
-
-  - [pubsub/events] [\#6634](https://github.com/tendermint/tendermint/pull/6634) The `ResultEvent.Events` field is now of type `[]abci.Event` preserving event order instead of `map[string][]string`. (@alexanderbez)
-  - [config] [\#5598](https://github.com/tendermint/tendermint/pull/5598) The `test_fuzz` and `test_fuzz_config` P2P settings have been removed. (@erikgrinaker)
-  - [config] [\#5728](https://github.com/tendermint/tendermint/pull/5728) `fastsync.version = "v1"` is no longer supported (@melekes)
-  - [cli] [\#5772](https://github.com/tendermint/tendermint/pull/5772) `gen_node_key` prints JSON-encoded `NodeKey` rather than ID and does not save it to `node_key.json` (@melekes)
-  - [cli] [\#5777](https://github.com/tendermint/tendermint/pull/5777) use hyphen-case instead of snake_case for all cli commands and config parameters (@cmwaters)
-  - [rpc] [\#6019](https://github.com/tendermint/tendermint/pull/6019) standardise RPC errors and return the correct status code (@bipulprasad & @cmwaters)
-  - [rpc] [\#6168](https://github.com/tendermint/tendermint/pull/6168) Change default sorting to desc for `/tx_search` results (@melekes)
-  - [cli] [\#6282](https://github.com/tendermint/tendermint/pull/6282) User must specify the node mode when using `tendermint init` (@cmwaters)
-  - [state/indexer] [\#6382](https://github.com/tendermint/tendermint/pull/6382) reconstruct indexer, move txindex into the indexer package (@JayT106)
-  - [cli] [\#6372](https://github.com/tendermint/tendermint/pull/6372) Introduce `BootstrapPeers` as part of the new p2p stack. Peers to be connected on  startup (@cmwaters)
-  - [config] [\#6462](https://github.com/tendermint/tendermint/pull/6462) Move `PrivValidator` configuration out of `BaseConfig` into its own section. (@tychoish)
-  - [rpc] [\#6610](https://github.com/tendermint/tendermint/pull/6610) Add MaxPeerBlockHeight into /status rpc call (@JayT106)
-  - [blocksync/rpc] [\#6620](https://github.com/tendermint/tendermint/pull/6620) Add TotalSyncedTime & RemainingTime to SyncInfo in /status RPC  (@JayT106)
-  - [rpc/grpc] [\#6725](https://github.com/tendermint/tendermint/pull/6725) Mark gRPC in the RPC layer as deprecated.
-  - [blocksync/v2] [\#6730](https://github.com/tendermint/tendermint/pull/6730) Fast Sync v2 is deprecated, please use v0
-  - [rpc] Add genesis_chunked method to support paginated and parallel fetching of large genesis documents.
-  - [rpc/jsonrpc/server] [\#6785](https://github.com/tendermint/tendermint/pull/6785) `Listen` function updated to take an `int` argument, `maxOpenConnections`, instead of an entire config object. (@williambanfield)
-  - [rpc] [\#6820](https://github.com/tendermint/tendermint/pull/6820) Update RPC methods to reflect changes in the p2p layer, disabling support for `UnsafeDialPeers` and `UnsafeDialPeers` when used with the new p2p layer, and changing the response format of the peer list in `NetInfo` for all users.
-  - [cli] [\#6854](https://github.com/tendermint/tendermint/pull/6854) Remove deprecated snake case commands. (@tychoish)
-  - [tools] [\#6498](https://github.com/tendermint/tendermint/pull/6498) Set OS home dir to instead of the hardcoded PATH. (@JayT106)
-  - [cli/indexer] [\#6676](https://github.com/tendermint/tendermint/pull/6676) Reindex events command line tooling. (@JayT106)
-
-- Apps
-
-  - [ABCI] [\#6408](https://github.com/tendermint/tendermint/pull/6408) Change the `key` and `value` fields from `[]byte` to `string` in the `EventAttribute` type. (@alexanderbez)
-  - [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Remove `SetOption` method from `ABCI.Client` interface
-  - [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Reset `Oneof` indexes for  `Request` and `Response`.
-  - [ABCI] [\#5818](https://github.com/tendermint/tendermint/pull/5818) Use protoio for msg length delimitation. Migrates from int64 to uint64 length delimiters.
-  - [ABCI] [\#3546](https://github.com/tendermint/tendermint/pull/3546) Add `mempool_error` field to `ResponseCheckTx`. This field will contain an error string if Tendermint encountered an error while adding a transaction to the mempool. (@williambanfield)
-  - [Version] [\#6494](https://github.com/tendermint/tendermint/pull/6494) `TMCoreSemVer` has been renamed to `TMVersion`.
-	- It is not required any longer to set ldflags to set version strings
-  - [abci/counter] [\#6684](https://github.com/tendermint/tendermint/pull/6684) Delete counter example app
-
-- Data Storage
-  - [store/state/evidence/light] [\#5771](https://github.com/tendermint/tendermint/pull/5771) Use an order-preserving varint key encoding (@cmwaters)
-  - [mempool] [\#6396](https://github.com/tendermint/tendermint/pull/6396) Remove mempool's write ahead log (WAL), (previously unused by the tendermint code). (@tychoish)
-  - [state] [\#6541](https://github.com/tendermint/tendermint/pull/6541) Move pruneBlocks from consensus/state to state/execution. (@JayT106)
-
-### IMPROVEMENTS
-
-- [libs/log] Console log formatting changes as a result of [\#6534](https://github.com/tendermint/tendermint/pull/6534) and [\#6589](https://github.com/tendermint/tendermint/pull/6589). (@tychoish)
-- [statesync] [\#6566](https://github.com/tendermint/tendermint/pull/6566) Allow state sync fetchers and request timeout to be configurable. (@alexanderbez)
-- [types] [\#6478](https://github.com/tendermint/tendermint/pull/6478) Add `block_id` to `newblock` event (@jeebster)
-- [crypto/ed25519] [\#5632](https://github.com/tendermint/tendermint/pull/5632) Adopt zip215 `ed25519` verification. (@marbar3778)
-- [crypto/ed25519] [\#6526](https://github.com/tendermint/tendermint/pull/6526) Use [curve25519-voi](https://github.com/oasisprotocol/curve25519-voi) for `ed25519` signing and verification. (@Yawning)
-- [crypto/sr25519] [\#6526](https://github.com/tendermint/tendermint/pull/6526) Use [curve25519-voi](https://github.com/oasisprotocol/curve25519-voi) for `sr25519` signing and verification. (@Yawning)
-- [privval] [\#5603](https://github.com/tendermint/tendermint/pull/5603) Add `--key` to `init`, `gen_validator`, `testnet` & `unsafe_reset_priv_validator` for use in generating `secp256k1` keys.
-- [privval] [\#5725](https://github.com/tendermint/tendermint/pull/5725) Add gRPC support to private validator.
-- [privval] [\#5876](https://github.com/tendermint/tendermint/pull/5876) `tendermint show-validator` will query the remote signer if gRPC is being used (@marbar3778)
-- [abci/client] [\#5673](https://github.com/tendermint/tendermint/pull/5673) `Async` requests return an error if queue is full (@melekes)
-- [mempool] [\#5673](https://github.com/tendermint/tendermint/pull/5673) Cancel `CheckTx` requests if RPC client disconnects or times out (@melekes)
-- [abci] [\#5706](https://github.com/tendermint/tendermint/pull/5706) Added `AbciVersion` to `RequestInfo` allowing applications to check ABCI version when connecting to Tendermint. (@marbar3778)
-- [blocksync/v1] [\#5728](https://github.com/tendermint/tendermint/pull/5728) Remove blocksync v1 (@melekes)
-- [blocksync/v0] [\#5741](https://github.com/tendermint/tendermint/pull/5741) Relax termination conditions and increase sync timeout (@melekes)
-- [cli] [\#5772](https://github.com/tendermint/tendermint/pull/5772) `gen_node_key` output now contains node ID (`id` field) (@melekes)
-- [blocksync/v2] [\#5774](https://github.com/tendermint/tendermint/pull/5774) Send status request when new peer joins (@melekes)
-- [store] [\#5888](https://github.com/tendermint/tendermint/pull/5888) store.SaveBlock saves using batches instead of transactions for now to improve ACID properties. This is a quick fix for underlying issues around tm-db and ACID guarantees. (@githubsands)
-- [consensus] [\#5987](https://github.com/tendermint/tendermint/pull/5987) and [\#5792](https://github.com/tendermint/tendermint/pull/5792) Remove the `time_iota_ms` consensus parameter. Merge `tmproto.ConsensusParams` and `abci.ConsensusParams`. (@marbar3778, @valardragon)
-- [types] [\#5994](https://github.com/tendermint/tendermint/pull/5994) Reduce the use of protobuf types in core logic. (@marbar3778)
-  - `ConsensusParams`, `BlockParams`, `ValidatorParams`, `EvidenceParams`, `VersionParams`, `sm.Version` and `version.Consensus` have become native types. They still utilize protobuf when being sent over the wire or written to disk.
-- [rpc/client/http] [\#6163](https://github.com/tendermint/tendermint/pull/6163) Do not drop events even if the `out` channel is full (@melekes)
-- [node] [\#6059](https://github.com/tendermint/tendermint/pull/6059) Validate and complete genesis doc before saving to state store (@silasdavis)
-- [state] [\#6067](https://github.com/tendermint/tendermint/pull/6067) Batch save state data (@githubsands & @cmwaters)
-- [crypto] [\#6120](https://github.com/tendermint/tendermint/pull/6120) Implement batch verification interface for ed25519 and sr25519. (@marbar3778)
-- [types] [\#6120](https://github.com/tendermint/tendermint/pull/6120) use batch verification for verifying commits signatures.
-  - If the key type supports the batch verification API it will try to batch verify. If the verification fails we will single verify each signature.
-- [privval/file] [\#6185](https://github.com/tendermint/tendermint/pull/6185) Return error on `LoadFilePV`, `LoadFilePVEmptyState`. Allows for better programmatic control of Tendermint.
-- [privval] [\#6240](https://github.com/tendermint/tendermint/pull/6240) Add `context.Context` to privval interface.
-- [rpc] [\#6265](https://github.com/tendermint/tendermint/pull/6265) set cache control in http-rpc response header (@JayT106)
-- [statesync] [\#6378](https://github.com/tendermint/tendermint/pull/6378) Retry requests for snapshots and add a minimum discovery time (5s) for new snapshots.
-- [node/state] [\#6370](https://github.com/tendermint/tendermint/pull/6370) graceful shutdown in the consensus reactor (@JayT106)
-- [crypto/merkle] [\#6443](https://github.com/tendermint/tendermint/pull/6443) Improve HashAlternatives performance (@cuonglm)
-- [crypto/merkle] [\#6513](https://github.com/tendermint/tendermint/pull/6513) Optimize HashAlternatives (@marbar3778)
-- [p2p/pex] [\#6509](https://github.com/tendermint/tendermint/pull/6509) Improve addrBook.hash performance (@cuonglm)
-- [consensus/metrics] [\#6549](https://github.com/tendermint/tendermint/pull/6549) Change block_size gauge to a histogram for better observability over time (@marbar3778)
-- [statesync] [\#6587](https://github.com/tendermint/tendermint/pull/6587) Increase chunk priority and re-request chunks that don't arrive (@cmwaters)
-- [state/privval] [\#6578](https://github.com/tendermint/tendermint/pull/6578) No GetPubKey retry beyond the proposal/voting window (@JayT106)
-- [rpc] [\#6615](https://github.com/tendermint/tendermint/pull/6615) Add TotalGasUsed to block_results response (@crypto-facs)
-- [cmd/tendermint/commands] [\#6623](https://github.com/tendermint/tendermint/pull/6623) replace `$HOME/.some/test/dir` with `t.TempDir` (@tanyabouman)
-- [statesync] \6807 Implement P2P state provider as an alternative to RPC (@cmwaters)
-
-## v0.34.13
-
-*September 6, 2021*
-
-This release backports improvements to state synchronization and ABCI
-performance under concurrent load, and the PostgreSQL event indexer.
-
-### IMPROVEMENTS
-
-- [statesync] [\#6881](https://github.com/tendermint/tendermint/issues/6881) improvements to stateprovider logic (@cmwaters)
-- [ABCI] [\#6873](https://github.com/tendermint/tendermint/issues/6873) change client to use multi-reader mutexes (@tychoish)
-- [indexing] [\#6906](https://github.com/tendermint/tendermint/issues/6906) enable the PostgreSQL indexer sink (@creachadair)
-
-## v0.34.12
-
-*August 17, 2021*
-
-Special thanks to external contributors on this release: @JayT106.
-
-### FEATURES
-
-- [rpc] [\#6717](https://github.com/tendermint/tendermint/pull/6717) introduce
-  `/genesis_chunked` rpc endpoint for handling large genesis files by chunking them (@tychoish)
-
-### IMPROVEMENTS
-
-- [rpc] [\#6825](https://github.com/tendermint/tendermint/issues/6825) Remove egregious INFO log from `ABCI#Query` RPC. (@alexanderbez)
-
-### BUG FIXES
-
-- [light] [\#6685](https://github.com/tendermint/tendermint/pull/6685) fix bug
-  with incorrectly handling contexts that would occasionally freeze state sync. (@cmwaters)
-- [privval] [\#6748](https://github.com/tendermint/tendermint/issues/6748) Fix vote timestamp to prevent chain halt (@JayT106)
-
-## v0.34.11
-
-*June 18, 2021*
-
-This release improves the robustness of statesync; tweaking channel priorities and timeouts and
-adding two new parameters to the state sync config.
-
-### BREAKING CHANGES
-
-- Apps
-    - [Version] [\#6494](https://github.com/tendermint/tendermint/pull/6494) `TMCoreSemVer` is not required to be set as a ldflag any longer.
-
-### IMPROVEMENTS
-
-- [statesync] [\#6566](https://github.com/tendermint/tendermint/pull/6566) Allow state sync fetchers and request timeout to be configurable. (@alexanderbez)
-- [statesync] [\#6378](https://github.com/tendermint/tendermint/pull/6378) Retry requests for snapshots and add a minimum discovery time (5s) for new snapshots. (@tychoish)
-- [statesync] [\#6582](https://github.com/tendermint/tendermint/pull/6582) Increase chunk priority and add multiple retry chunk requests (@cmwaters)
-
-### BUG FIXES
-
-- [evidence] [\#6375](https://github.com/tendermint/tendermint/pull/6375) Fix bug with inconsistent LightClientAttackEvidence hashing (@cmwaters)
-
-## v0.34.10
-
-*April 14, 2021*
-
-This release fixes a bug where peers would sometimes try to send messages
-on incorrect channels. Special thanks to our friends at Oasis Labs for surfacing
-this issue!
-
-- [p2p/node] [\#6339](https://github.com/tendermint/tendermint/issues/6339) Fix bug with using custom channels (@cmwaters)
-- [light] [\#6346](https://github.com/tendermint/tendermint/issues/6346) Correctly handle too high errors to improve client robustness (@cmwaters)
-
-## v0.34.9
-
-*April 8, 2021*
-
-This release fixes a moderate severity security issue, Security Advisory Alderfly,
-which impacts all networks that rely on Tendermint light clients.
-Further details will be released once networks have upgraded.
-
-This release also includes a small Go API-breaking change, to reduce panics in the RPC layer.
-
-Special thanks to our external contributors on this release: @gchaincl
-
-### BREAKING CHANGES
-
-- Go API
-    - [rpc/jsonrpc/server] [\#6204](https://github.com/tendermint/tendermint/issues/6204) Modify `WriteRPCResponseHTTP(Error)` to return an error (@melekes)
-
-### FEATURES
-
-- [rpc] [\#6226](https://github.com/tendermint/tendermint/issues/6226) Index block events and expose a new RPC method, `/block_search`, to allow querying for blocks by `BeginBlock` and `EndBlock` events (@alexanderbez)
-
-### BUG FIXES
-
-- [rpc/jsonrpc/server] [\#6191](https://github.com/tendermint/tendermint/issues/6191) Correctly unmarshal `RPCRequest` when data is `null` (@melekes)
-- [p2p] [\#6289](https://github.com/tendermint/tendermint/issues/6289) Fix "unknown channels" bug on CustomReactors (@gchaincl)
-- [light/evidence] Adds logic to handle forward lunatic attacks (@cmwaters)
-
-## v0.34.8
-
-*February 25, 2021*
-
-This release, in conjunction with [a fix in the Cosmos SDK](https://github.com/cosmos/cosmos-sdk/pull/8641),
-introduces changes that should mean the logs are much, much quieter. 🎉
-
-### IMPROVEMENTS
-
-- [libs/log] [\#6174](https://github.com/tendermint/tendermint/issues/6174) Include timestamp (`ts` field; `time.RFC3339Nano` format) in JSON logger output (@melekes)
-
-### BUG FIXES
-
-- [abci] [\#6124](https://github.com/tendermint/tendermint/issues/6124) Fixes a panic condition during callback execution in `ReCheckTx` during high tx load. (@alexanderbez)
-
-## v0.34.7
-
-*February 18, 2021*
-
-This release fixes a downstream security issue which impacts Cosmos SDK
-users who are:
-
-* Using Cosmos SDK v0.40.0 or later, AND
-* Running validator nodes, AND
-* Using the file-based `FilePV` implementation for their consensus keys
-
-Users who fulfill all the above criteria were susceptible to leaking
-private key material in the logs. All other users are unaffected.
-
-The root cause was a discrepancy
-between the Tendermint Core (untyped) logger and the Cosmos SDK (typed) logger:
-Tendermint Core's logger automatically stringifies Go interfaces whenever possible;
-however, the Cosmos SDK's logger uses reflection to log the fields within a Go interface.
-
-The introduction of the typed logger meant that previously un-logged fields within
-interfaces are now sometimes logged, including the private key material inside the
-`FilePV` struct.
-
-Tendermint Core v0.34.7 fixes this issue; however, we strongly recommend that all validators
-use remote signer implementations instead of `FilePV` in production.
-
-Thank you to @joe-bowman for his assistance with this vulnerability and a particular
-shout-out to @marbar3778 for diagnosing it quickly.
-
-### BUG FIXES
-
-- [consensus] [\#6128](https://github.com/tendermint/tendermint/pull/6128) Remove privValidator from log call (@tessr)
-
-## v0.34.6
-
-*February 18, 2021*
-
-_Tendermint Core v0.34.5 and v0.34.6 have been recalled due to release tooling problems._
-
-## v0.34.4
-
-*February 11, 2021*
-
-This release includes a fix for a memory leak in the evidence reactor (see #6068, below).
-All Tendermint clients are recommended to upgrade.
-Thank you to our friends at Crypto.com for the initial report of this memory leak!
-
-Special thanks to other external contributors on this release: @yayajacky, @odidev, @laniehei, and @c29r3!
-
-### BUG FIXES
-
-- [light] [\#6022](https://github.com/tendermint/tendermint/pull/6022) Fix a bug when the number of validators equals 100 (@melekes)
-- [light] [\#6026](https://github.com/tendermint/tendermint/pull/6026) Fix a bug when height isn't provided for the rpc calls: `/commit` and `/validators` (@cmwaters)
-- [evidence] [\#6068](https://github.com/tendermint/tendermint/pull/6068) Terminate broadcastEvidenceRoutine when peer is stopped (@melekes)
-
-## v0.34.3
+## v0.34.3 
 
 *January 19, 2021*
 
-This release includes a fix for a high-severity security vulnerability,
-a DoS-vector that impacted Tendermint Core v0.34.0-v0.34.2. For more details, see
-[Security Advisory Mulberry](https://github.com/tendermint/tendermint/security/advisories/GHSA-p658-8693-mhvg)
-or https://nvd.nist.gov/vuln/detail/CVE-2021-21271.
+This release includes a fix for a high-severity security vulnerability. 
+More information on this vulnerability will be released on January 26, 2021
+and this changelog will be updated. 
 
-Tendermint Core v0.34.3 also updates GoGo Protobuf to 1.3.2 in order to pick up the fix for
-https://nvd.nist.gov/vuln/detail/CVE-2021-3121.
+It also updates GoGo Protobuf to 1.3.2 in order to pick up the fix for
+https://nvd.nist.gov/vuln/detail/CVE-2021-3121. 
+
+Friendly reminder: We have a [bug bounty program](https://hackerone.com/tendermint).
 
 ### BUG FIXES
 
-- [evidence] [[security fix]](https://github.com/tendermint/tendermint/security/advisories/GHSA-p658-8693-mhvg) Use correct source of evidence time (@cmwaters)
+- [evidence] [N/A] Use correct source of evidence time (@cmwaters)
 - [proto] [\#5886](https://github.com/tendermint/tendermint/pull/5889) Bump gogoproto to 1.3.2 (@marbar3778)
 
 ## v0.34.2
@@ -544,6 +26,8 @@ This release fixes a substantial bug in evidence handling where evidence could
 sometimes be broadcast before the block containing that evidence was fully committed,
 resulting in some nodes panicking when trying to verify said evidence.
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES
 
 - Go API
@@ -567,6 +51,8 @@ disconnecting from this node. As a temporary remedy (until the mempool package
 is refactored), the `max-batch-bytes` was disabled. Transactions will be sent
 one by one without batching.
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES
 
 - CLI/RPC/Config
@@ -595,6 +81,8 @@ Holy smokes, this is a big one! For a more reader-friendly overview of the chang
 Special thanks to external contributors on this release: @james-ray, @fedekunze, @favadi, @alessio,
 @joe-bowman, @cuonglm, @SadPencil and @dongsam.
 
+And as always, friendly reminder, that we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES
 
 - CLI/RPC/Config
@@ -621,14 +109,14 @@ Special thanks to external contributors on this release: @james-ray, @fedekunze,
   - [blockchain] [\#4637](https://github.com/tendermint/tendermint/pull/4637) Migrate blockchain reactor(s) to Protobuf encoding (@marbar3778)
   - [evidence] [\#4949](https://github.com/tendermint/tendermint/pull/4949) Migrate evidence reactor to Protobuf encoding (@marbar3778)
   - [mempool] [\#4940](https://github.com/tendermint/tendermint/pull/4940) Migrate mempool from to Protobuf encoding (@marbar3778)
-  - [mempool] [\#5321](https://github.com/tendermint/tendermint/pull/5321) Batch transactions when broadcasting them to peers (@melekes)
+  - [mempool] [\#5321](https://github.com/tendermint/tendermint/pull/5321) Batch transactions when broadcasting them to peers (@melekes) 
      - `MaxBatchBytes` new config setting defines the max size of one batch.
   - [p2p/pex] [\#4973](https://github.com/tendermint/tendermint/pull/4973) Migrate `p2p/pex` reactor to Protobuf encoding (@marbar3778)
   - [statesync] [\#4943](https://github.com/tendermint/tendermint/pull/4943) Migrate state sync reactor to Protobuf encoding (@marbar3778)
 
 - Blockchain Protocol
 
-  - [evidence] [\#4725](https://github.com/tendermint/tendermint/pull/4725) Remove `Pubkey` from `DuplicateVoteEvidence` (@marbar3778)
+  - [evidence] [\#4725](https://github.com/tendermint/tendermint/pull/4725) Remove `Pubkey` from `DuplicateVoteEvidence` (@marbar3778) 
   - [evidence] [\#5499](https://github.com/tendermint/tendermint/pull/5449) Cap evidence to a maximum number of bytes (supercedes [\#4780](https://github.com/tendermint/tendermint/pull/4780)) (@cmwaters)
   - [merkle] [\#5193](https://github.com/tendermint/tendermint/pull/5193) Header hashes are no longer empty for empty inputs, notably `DataHash`, `EvidenceHash`, and `LastResultsHash` (@erikgrinaker)
   - [state] [\#4845](https://github.com/tendermint/tendermint/pull/4845) Include `GasWanted` and `GasUsed` into `LastResultsHash` (@melekes)
@@ -687,7 +175,7 @@ Special thanks to external contributors on this release: @james-ray, @fedekunze,
   - [types] [\#4852](https://github.com/tendermint/tendermint/pull/4852) Vote & Proposal `SignBytes` is now func `VoteSignBytes` & `ProposalSignBytes` (@marbar3778)
   - [types] [\#4798](https://github.com/tendermint/tendermint/pull/4798) Simplify `VerifyCommitTrusting` func + remove extra validation (@melekes)
   - [types] [\#4845](https://github.com/tendermint/tendermint/pull/4845) Remove `ABCIResult` (@melekes)
-  - [types] [\#5029](https://github.com/tendermint/tendermint/pull/5029) Rename all values from `PartsHeader` to `PartSetHeader` to have consistency (@marbar3778)
+  - [types] [\#5029](https://github.com/tendermint/tendermint/pull/5029) Rename all values from `PartsHeader` to `PartSetHeader` to have consistency (@marbar3778) 
   - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) `Total` in `Parts` & `PartSetHeader` has been changed from a `int` to a `uint32` (@marbar3778)
   - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) Vote: `ValidatorIndex` & `Round` are now `int32` (@marbar3778)
   - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) Proposal: `POLRound` & `Round` are now `int32` (@marbar3778)
@@ -725,7 +213,7 @@ Special thanks to external contributors on this release: @james-ray, @fedekunze,
 - [evidence] [\#4722](https://github.com/tendermint/tendermint/pull/4722) Consolidate evidence store and pool types to improve evidence DB (@cmwaters)
 - [evidence] [\#4839](https://github.com/tendermint/tendermint/pull/4839) Reject duplicate evidence from being proposed (@cmwaters)
 - [evidence] [\#5219](https://github.com/tendermint/tendermint/pull/5219) Change the source of evidence time to block time (@cmwaters)
-- [libs] [\#5126](https://github.com/tendermint/tendermint/pull/5126) Add a sync package which wraps sync.(RW)Mutex & deadlock.(RW)Mutex and use a build flag (deadlock) in order to enable deadlock checking (@marbar3778)
+- [libs] [\#5126](https://github.com/tendermint/tendermint/pull/5126) Add a sync package which wraps sync.(RW)Mutex & deadlock.(RW)Mutex and use a build flag (deadlock) in order to enable deadlock checking (@marbar3778) 
 - [light] [\#4935](https://github.com/tendermint/tendermint/pull/4935) Fetch and compare a new header with witnesses in parallel (@melekes)
 - [light] [\#4929](https://github.com/tendermint/tendermint/pull/4929) Compare header with witnesses only when doing bisection (@melekes)
 - [light] [\#4916](https://github.com/tendermint/tendermint/pull/4916) Validate basic for inbound validator sets and headers before further processing them (@cmwaters)
@@ -835,6 +323,9 @@ as 2/3+ of the signatures are checked._
 
 Special thanks to @njmurarka at Bluzelle Networks for reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [consensus] Do not allow signatures for a wrong block in commits (@ebuchman)
@@ -850,6 +341,8 @@ need to update your code.**
 
 Special thanks to external contributors on this release: @tau3,
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -909,6 +402,8 @@ Special thanks to external contributors on this release: @tau3,
 
 Special thanks to external contributors on this release: @whylee259, @greg-szabo
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -995,6 +490,9 @@ Notes:
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
@@ -1007,6 +505,8 @@ and reporting this.
 Special thanks to external contributors on this release:
 @antho1404, @michaelfig, @gterzian, @tau3, @Shivani912
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - CLI/RPC/Config
@@ -1057,6 +557,9 @@ Special thanks to external contributors on this release:
 Special thanks to external contributors on this release:
 @princesinha19
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### FEATURES:
 
 - [rpc] [\#3333](https://github.com/tendermint/tendermint/issues/3333) Add `order_by` to `/tx_search` endpoint, allowing to change default ordering from asc to desc (@princesinha19)
@@ -1075,6 +578,9 @@ Special thanks to external contributors on this release:
 
 Special thanks to external contributors on this release: @mrekucci, @PSalant726, @princesinha19, @greg-szabo, @dongsam, @cuonglm, @jgimeno, @yenkhoon
 
+Friendly reminder, we have a [bug bounty
+program.](https://hackerone.com/tendermint).
+
 *January 14, 2020*
 
 This release contains breaking changes to the `Block#Header`, specifically
@@ -1093,7 +599,7 @@ and a validator address plus a timestamp. Note we may remove the validator
 address & timestamp fields in the future (see ADR-25).
 
 `lite2` package has been added to solve `lite` issues and introduce weak
-subjectivity interface. Refer to the [spec](https://github.com/tendermint/tendermint/blob/v0.35.x/spec/consensus/light-client.md) for complete details.
+subjectivity interface. Refer to the [spec](https://github.com/tendermint/spec/blob/master/spec/consensus/light-client.md) for complete details.
 `lite` package is now deprecated and will be removed in v0.34 release.
 
 ### BREAKING CHANGES:
@@ -1303,6 +809,9 @@ Notes:
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
@@ -1314,6 +823,9 @@ _January, 9, 2020_
 
 Special thanks to external contributors on this release: @greg-szabo, @gregzaitsev, @yenkhoon
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### FEATURES:
 
 - [rpc/lib] [\#4248](https://github.com/tendermint/tendermint/issues/4248) RPC client basic authentication support (@greg-szabo)
@@ -1335,6 +847,9 @@ Special thanks to external contributors on this release: @greg-szabo, @gregzaits
 
 Special thanks to external contributors on this release: @erikgrinaker, @guagualvcha, @hsyis, @cosmostuba, @whunmr, @austinabell
 
+Friendly reminder, we have a [bug bounty
+program.](https://hackerone.com/tendermint).
+
 
 ### BREAKING CHANGES:
 
@@ -1374,6 +889,9 @@ identified and fixed here.
 Special thanks to [elvishacker](https://hackerone.com/elvishacker) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -1400,6 +918,9 @@ accepting new peers and only allowing `ed25519` pubkeys.
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for pointing
 this out.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Only allow ed25519 pubkeys when connecting
@@ -1415,6 +936,9 @@ All clients are recommended to upgrade. See
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for discovering
 and reporting this issue.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Fix for panic on nil public key send to a peer
@@ -1425,6 +949,9 @@ and reporting this issue.
 
 Special thanks to external contributors on this release: @jon-certik, @gracenoah, @PSalant726, @gchaincl
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - CLI/RPC/Config
@@ -1460,6 +987,9 @@ guide.
 Special thanks to external contributors on this release:
 @gchaincl, @bluele, @climber73
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### IMPROVEMENTS:
 
 - [consensus] [\#3839](https://github.com/tendermint/tendermint/issues/3839) Reduce "Error attempting to add vote" message severity (Error -> Info)
@@ -1480,6 +1010,9 @@ Special thanks to external contributors on this release:
 Special thanks to external contributors on this release:
 @ruseinov, @bluele, @guagualvcha
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -1519,6 +1052,9 @@ This release contains a minor enhancement to the ABCI and some breaking changes
 - CheckTx requests include a `CheckTxType` enum that can be set to `Recheck` to indicate to the application that this transaction was already checked/validated and certain expensive operations (like checking signatures) can be skipped
 - Removed various functions from `libs` pkgs
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -1564,6 +1100,9 @@ and the RPC, namely:
   [docs](https://github.com/tendermint/tendermint/blob/60827f75623b92eff132dc0eff5b49d2025c591e/docs/spec/abci/abci.md#events)
 - Bind RPC to localhost by default, not to the public interface [UPGRADING/RPC_Changes](./UPGRADING.md#rpc_changes)
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 * CLI/RPC/Config
@@ -1664,6 +1203,8 @@ Notes:
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### SECURITY:
 
@@ -1684,6 +1225,8 @@ identified and fixed here.
 Special thanks to [elvishacker](https://hackerone.com/elvishacker) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### BREAKING CHANGES:
 
@@ -1711,6 +1254,8 @@ accepting new peers and only allowing `ed25519` pubkeys.
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for pointing
 this out.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### SECURITY:
 
@@ -1727,6 +1272,8 @@ All clients are recommended to upgrade. See
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for discovering
 and reporting this issue.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### SECURITY:
 
@@ -2022,6 +1569,8 @@ See the [v0.31.0
 Milestone](https://github.com/tendermint/tendermint/milestone/19?closed=1) for
 more details.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### BREAKING CHANGES:
 
@@ -2033,7 +1582,7 @@ more details.
   - [rpc] [\#3269](https://github.com/tendermint/tendermint/issues/2826) Limit number of unique clientIDs with open subscriptions. Configurable via `rpc.max_subscription_clients`
   - [rpc] [\#3269](https://github.com/tendermint/tendermint/issues/2826) Limit number of unique queries a given client can subscribe to at once. Configurable via `rpc.max_subscriptions_per_client`.
   - [rpc] [\#3435](https://github.com/tendermint/tendermint/issues/3435) Default ReadTimeout and WriteTimeout changed to 10s. WriteTimeout can increased by setting `rpc.timeout_broadcast_tx_commit` in the config.
-  - [rpc/client] [\#3269](https://github.com/tendermint/tendermint/issues/3269) Update `EventsClient` interface to reflect new pubsub/eventBus API [ADR-33](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-033-pubsub.md). This includes `Subscribe`, `Unsubscribe`, and `UnsubscribeAll` methods.
+  - [rpc/client] [\#3269](https://github.com/tendermint/tendermint/issues/3269) Update `EventsClient` interface to reflect new pubsub/eventBus API [ADR-33](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-033-pubsub.md). This includes `Subscribe`, `Unsubscribe`, and `UnsubscribeAll` methods.
 
 * Apps
   - [abci] [\#3403](https://github.com/tendermint/tendermint/issues/3403) Remove `time_iota_ms` from BlockParams. This is a
@@ -2086,7 +1635,7 @@ more details.
 - [blockchain] [\#3358](https://github.com/tendermint/tendermint/pull/3358) Fix timer leak in `BlockPool` (@guagualvcha)
 - [cmd] [\#3408](https://github.com/tendermint/tendermint/issues/3408) Fix `testnet` command's panic when creating non-validator configs (using `--n` flag) (@srmo)
 - [libs/db/remotedb/grpcdb] [\#3402](https://github.com/tendermint/tendermint/issues/3402) Close Iterator/ReverseIterator after use
-- [libs/pubsub] [\#951](https://github.com/tendermint/tendermint/issues/951), [\#1880](https://github.com/tendermint/tendermint/issues/1880) Use non-blocking send when dispatching messages [ADR-33](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-033-pubsub.md)
+- [libs/pubsub] [\#951](https://github.com/tendermint/tendermint/issues/951), [\#1880](https://github.com/tendermint/tendermint/issues/1880) Use non-blocking send when dispatching messages [ADR-33](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-033-pubsub.md)
 - [lite] [\#3364](https://github.com/tendermint/tendermint/issues/3364) Fix `/validators` and `/abci_query` proxy endpoints
   (@guagualvcha)
 - [p2p/conn] [\#3347](https://github.com/tendermint/tendermint/issues/3347) Reject all-zero shared secrets in the Diffie-Hellman step of secret-connection
@@ -2242,6 +1791,8 @@ This release contains two important fixes: one for p2p layer where we sometimes
 were not closing connections and one for consensus layer where consensus with
 no empty blocks (`create_empty_blocks = false`) could halt.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### IMPROVEMENTS:
 - [pex] [\#3037](https://github.com/tendermint/tendermint/issues/3037) Only log "Reached max attempts to dial" once
@@ -2281,6 +1832,8 @@ While we are trying to stabilize the Block protocol to preserve compatibility
 with old chains, there may be some final changes yet to come before Cosmos
 launch as we continue to audit and test the software.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### BREAKING CHANGES:
 
@@ -2329,6 +1882,8 @@ launch as we continue to audit and test the software.
 Special thanks to external contributors on this release:
 @HaoyangLiu
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### BUG FIXES:
 - [consensus] Fix consensus halt from proposing blocks with too much evidence
@@ -2382,7 +1937,7 @@ See [UPGRADING.md](UPGRADING.md) for more details.
 
 - [build] [\#3085](https://github.com/tendermint/tendermint/issues/3085) Fix `Version` field in build scripts (@husio)
 - [crypto/multisig] [\#3102](https://github.com/tendermint/tendermint/issues/3102) Fix multisig keys address length
-- [crypto/encoding] [\#3101](https://github.com/tendermint/tendermint/issues/3101) Fix `PubKeyMultisigThreshold` unmarshaling into `crypto.PubKey` interface
+- [crypto/encoding] [\#3101](https://github.com/tendermint/tendermint/issues/3101) Fix `PubKeyMultisigThreshold` unmarshalling into `crypto.PubKey` interface
 - [p2p/conn] [\#3111](https://github.com/tendermint/tendermint/issues/3111) Make SecretConnection thread safe
 - [rpc] [\#3053](https://github.com/tendermint/tendermint/issues/3053) Fix internal error in `/tx_search` when results are empty
   (@gianfelipe93)
@@ -2457,6 +2012,8 @@ Special thanks to @dlguddus for discovering a [major
 issue](https://github.com/tendermint/tendermint/issues/2718#issuecomment-440888677)
 in the proposer selection algorithm.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 This release is primarily about fixes to the proposer selection algorithm
 in preparation for the [Cosmos Game of
@@ -2519,6 +2076,8 @@ Special thanks to external contributors on this release:
 @ackratos, @goolAdapter, @james-ray, @joe-bowman, @kostko,
 @nagarajmanjunath, @tomtau
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### FEATURES:
 
@@ -2558,6 +2117,8 @@ Special thanks to external contributors on this release:
 Special thanks to external contributors on this release:
 @danil-lashin, @kevlubkcm, @krhubert, @srmo
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
 
 ### BREAKING CHANGES:
 
@@ -2602,6 +2163,8 @@ Special thanks to external contributors on this release:
 
 Special thanks to external contributors on this release: @hleb-albau, @zhuzeyu
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### FEATURES:
 
 - [rpc] [\#2582](https://github.com/tendermint/tendermint/issues/2582) Enable CORS on RPC API (@hleb-albau)
@@ -2619,6 +2182,8 @@ Special thanks to external contributors on this release: @hleb-albau, @zhuzeyu
 
 Special thanks to external contributors on this release: @katakonst
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### IMPROVEMENTS:
 
 - [consensus] [\#2704](https://github.com/tendermint/tendermint/issues/2704) Simplify valid POL round logic
@@ -2790,7 +2355,9 @@ Special thanks to external contributors on this release:
 This release is mostly about the ConsensusParams - removing fields and enforcing MaxGas.
 It also addresses some issues found via security audit, removes various unused
 functions from `libs/common`, and implements
-[ADR-012](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-012-peer-transport.md).
+[ADR-012](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-012-peer-transport.md).
+
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
 
 BREAKING CHANGES:
 
@@ -2821,7 +2388,7 @@ FEATURES:
 - [libs] [\#2286](https://github.com/tendermint/tendermint/issues/2286) Panic if `autofile` or `db/fsdb` permissions change from 0600.
 
 IMPROVEMENTS:
-- [libs/db] [\#2371](https://github.com/tendermint/tendermint/issues/2371) Output error instead of panic when the given `db_backend` is not initialized (@bradyjoestar)
+- [libs/db] [\#2371](https://github.com/tendermint/tendermint/issues/2371) Output error instead of panic when the given `db_backend` is not initialised (@bradyjoestar)
 - [mempool] [\#2399](https://github.com/tendermint/tendermint/issues/2399) Make mempool cache a proper LRU (@bradyjoestar)
 - [p2p] [\#2126](https://github.com/tendermint/tendermint/issues/2126) Introduce PeerTransport interface to improve isolation of concerns
 - [libs/common] [\#2326](https://github.com/tendermint/tendermint/issues/2326) Service returns ErrNotStarted
@@ -2871,7 +2438,7 @@ BREAKING CHANGES:
   - [abci] Added address of the original proposer of the block to Header
   - [abci] Change ABCI Header to match Tendermint exactly
   - [abci] [\#2159](https://github.com/tendermint/tendermint/issues/2159) Update use of `Validator` (see
-    [ADR-018](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-018-ABCI-Validators.md)):
+    [ADR-018](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-018-ABCI-Validators.md)):
     - Remove PubKey from `Validator` (so it's just Address and Power)
     - Introduce `ValidatorUpdate` (with just PubKey and Power)
     - InitChain and EndBlock use ValidatorUpdate
@@ -2893,7 +2460,7 @@ BREAKING CHANGES:
   - [state] [\#1815](https://github.com/tendermint/tendermint/issues/1815) Validator set changes are now delayed by one block (!)
     - Add NextValidatorSet to State, changes on-disk representation of state
   - [state] [\#2184](https://github.com/tendermint/tendermint/issues/2184) Enforce ConsensusParams.BlockSize.MaxBytes (See
-    [ADR-020](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-020-block-size.md)).
+    [ADR-020](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-020-block-size.md)).
     - Remove ConsensusParams.BlockSize.MaxTxs
     - Introduce maximum sizes for all components of a block, including ChainID
   - [types] Updates to the block Header:
@@ -2904,7 +2471,7 @@ BREAKING CHANGES:
   - [consensus] [\#2203](https://github.com/tendermint/tendermint/issues/2203) Implement BFT time
     - Timestamp in block must be monotonic and equal the median of timestamps in block's LastCommit
   - [crypto] [\#2239](https://github.com/tendermint/tendermint/issues/2239) Secp256k1 signature changes (See
-    [ADR-014](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-014-secp-malleability.md)):
+    [ADR-014](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-014-secp-malleability.md)):
     - format changed from DER to `r || s`, both little endian encoded as 32 bytes.
     - malleability removed by requiring `s` to be in canonical form.
 

CHANGELOG_PENDING.md

@@ -1,29 +1,61 @@
 # Unreleased Changes
 
-Friendly reminder: We have a [bug bounty program](https://hackerone.com/cosmos).
-
-## v0.35.10
-
-Month DD, YYYY
+## vX.X
 
 Special thanks to external contributors on this release:
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES
 
 - CLI/RPC/Config
+  - [config] \#5598 The `test_fuzz` and `test_fuzz_config` P2P settings have been removed. (@erikgrinaker)
+  - [config] \#5728 `fast_sync = "v1"` is no longer supported (@melekes)
+  - [cli] \#5772 `gen_node_key` prints JSON-encoded `NodeKey` rather than ID and does not save it to `node_key.json` (@melekes)
+  - [cli] \#5777 use hyphen-case instead of snake_case for all cli commands and config parameters (@cmwaters)
 
 - Apps
+  - [ABCI] \#5447 Remove `SetOption` method from `ABCI.Client` interface
+  - [ABCI] \#5447 Reset `Oneof` indexes for  `Request` and `Response`.
+  - [ABCI] \#5818 Use protoio for msg length delimitation. Migrates from int64 to uint64 length delimiters.
 
 - P2P Protocol
 
 - Go API
+  - [abci/client, proxy] \#5673 `Async` funcs return an error, `Sync` and `Async` funcs accept `context.Context` (@melekes)
+  - [p2p] Removed unused function `MakePoWTarget`. (@erikgrinaker)
+  - [libs/bits] \#5720 Validate `BitArray` in `FromProto`, which now returns an error (@melekes)
+  - [proto/p2p] Renamed `DefaultNodeInfo` and `DefaultNodeInfoOther` to `NodeInfo` and `NodeInfoOther` (@erikgrinaker)
+  - [proto/p2p] Rename `NodeInfo.default_node_id` to `node_id` (@erikgrinaker)
+  - [libs/os] Kill() and {Must,}{Read,Write}File() functions have been removed. (@alessio)
+  - [store] \#5848 Remove block store state in favor of using the db iterators directly (@cmwaters)
+  - [state] \#5864 Use an iterator when pruning state (@cmwaters)
 
 - Blockchain Protocol
 
+- Data Storage
+  - [store/state/evidence/light] \#5771 Use an order-preserving varint key encoding (@cmwaters)
+
 ### FEATURES
 
 ### IMPROVEMENTS
 
-- (indexer) \#8625 Fix overriding tx index of duplicated txs.
+- [crypto/ed25519] \#5632 Adopt zip215 `ed25519` verification. (@marbar3778)
+- [privval] \#5603 Add `--key` to `init`, `gen_validator`, `testnet` & `unsafe_reset_priv_validator` for use in generating `secp256k1` keys.
+- [privval] \#5725 Add gRPC support to private validator. 
+- [privval] \#5876 `tendermint show-validator` will query the remote signer if gRPC is being used (@marbar3778)
+- [abci/client] \#5673 `Async` requests return an error if queue is full (@melekes)
+- [mempool] \#5673 Cancel `CheckTx` requests if RPC client disconnects or times out (@melekes)
+- [abci] \#5706 Added `AbciVersion` to `RequestInfo` allowing applications to check ABCI version when connecting to Tendermint. (@marbar3778)
+- [blockchain/v1] \#5728 Remove in favor of v2 (@melekes)
+- [blockchain/v0] \#5741 Relax termination conditions and increase sync timeout (@melekes)
+- [cli] \#5772 `gen_node_key` output now contains node ID (`id` field) (@melekes)
+- [blockchain/v2] \#5774 Send status request when new peer joins (@melekes)
+- [consensus] \#5792 Deprecates the `time_iota_ms` consensus parameter, to reduce the bug surface. The parameter is no longer used. (@valardragon)
 
 ### BUG FIXES
+
+- [types] \#5523 Change json naming of `PartSetHeader` within `BlockID` from `parts` to `part_set_header` (@marbar3778)
+- [privval] \#5638 Increase read/write timeout to 5s and calculate ping interval based on it (@JoeKash)
+- [blockchain/v1] [\#5701](https://github.com/tendermint/tendermint/pull/5701) Handle peers without blocks (@melekes)
+- [blockchain/v1] \#5711 Fix deadlock (@melekes)

CODE_OF_CONDUCT.md

@@ -20,7 +20,7 @@ This code of conduct applies to all projects run by the Tendermint/COSMOS team a
 
 * Please keep unstructured critique to a minimum. If you have solid ideas you want to experiment with, make a fork and see how it works.
 
-* We will exclude you from interaction if you insult, demean or harass anyone. That is not welcome behaviour. We interpret the term “harassment” as including the definition in the [Citizen Code of Conduct](https://github.com/stumpsyn/policies/blob/master/citizen_code_of_conduct.md); if you have any lack of clarity about what might be included in that concept, please read their definition. In particular, we don’t tolerate behavior that excludes people in socially marginalized groups.
+* We will exclude you from interaction if you insult, demean or harass anyone. That is not welcome behaviour. We interpret the term “harassment” as including the definition in the [Citizen Code of Conduct](http://citizencodeofconduct.org/); if you have any lack of clarity about what might be included in that concept, please read their definition. In particular, we don’t tolerate behavior that excludes people in socially marginalized groups.
 
 * Private harassment is also unacceptable. No matter who you are, if you feel you have been or are being harassed or made uncomfortable by a community member, please contact one of the channel admins or the person mentioned above immediately. Whether you’re a regular contributor or a newcomer, we care about making this community a safe place for you and we’ve got your back.
 

CONTRIBUTING.md

@@ -26,8 +26,7 @@ will indicate their support with a heartfelt emoji.
 
 If the issue would benefit from thorough discussion, maintainers may
 request that you create a [Request For
-Comment](https://github.com/tendermint/tendermint/tree/master/docs/rfc)
-in the Tendermint spec repo. Discussion
+Comment](https://github.com/tendermint/spec/tree/master/rfc). Discussion
 at the RFC stage will build collective understanding of the dimensions
 of the problems and help structure conversations around trade-offs.
 
@@ -109,20 +108,37 @@ We use [Protocol Buffers](https://developers.google.com/protocol-buffers) along
 
 For linting, checking breaking changes and generating proto stubs, we use [buf](https://buf.build/). If you would like to run linting and check if the changes you have made are breaking then you will need to have docker running locally. Then the linting cmd will be `make proto-lint` and the breaking changes check will be `make proto-check-breaking`.
 
-We use [Docker](https://www.docker.com/) to generate the protobuf stubs. To generate the stubs yourself, make sure docker is running then run `make proto-gen`.
+There are two ways to generate your proto stubs.
+
+1. Use Docker, pull an image that will generate your proto stubs with no need to install anything. `make proto-gen-docker`
+2. Run `make proto-gen` after installing `buf` and `gogoproto`, you can do this by running `make protobuf`.
+
+### Installation Instructions
+
+To install `protoc`, download an appropriate release (<https://github.com/protocolbuffers/protobuf>) and then move the provided binaries into your PATH (follow instructions in README included with the download).
+
+To install `gogoproto`, do the following:
+
+```sh
+go get github.com/gogo/protobuf/gogoproto
+cd $GOPATH/pkg/mod/github.com/gogo/protobuf@v1.3.1 # or wherever go get installs things
+make install
+```
+
+You should now be able to run `make proto-gen` from inside the root Tendermint directory to generate new files from proto files.
 
 ### Visual Studio Code
 
-If you are a VS Code user, you may want to add the following to your `.vscode/settings.json`:
+If you are a VS Code user, you may want to add the following to your `.vscode/settings.json`:  
 
 ```json
-{
-  "protoc": {
-    "options": [
-      "--proto_path=${workspaceRoot}/proto",
-      "--proto_path=${workspaceRoot}/third_party/proto"
-    ]
-  }
+{	
+  "protoc": {	
+    "options": [	
+      "--proto_path=${workspaceRoot}/proto",	
+      "--proto_path=${workspaceRoot}/third_party/proto"	
+    ]	
+  }	
 }
 ```
 
@@ -227,230 +243,125 @@ Fixes #nnnn
 
 Each PR should have one commit once it lands on `master`; this can be accomplished by using the "squash and merge" button on Github. Be sure to edit your commit message, though!
 
-### Release procedure
+### Release Procedure
 
-#### A note about backport branches
-Tendermint's `master` branch is under active development.
-Releases are specified using tags and are built from long-lived "backport" branches.
-Each release "line" (e.g. 0.34 or 0.33) has its own long-lived backport branch,
-and the backport branches have names like `v0.34.x` or `v0.33.x`
-(literally, `x`; it is not a placeholder in this case).
+#### Major Release
 
-As non-breaking changes land on `master`, they should also be backported (cherry-picked)
-to these backport branches.
+This major release process assumes that this release was preceded by release candidates. 
+If there were no release candidates, and you'd like to cut a major release directly from master, see below. 
 
-We use Mergify's [backport feature](https://mergify.io/features/backports) to automatically backport
-to the needed branch. There should be a label for any backport branch that you'll be targeting.
-To notify the bot to backport a pull request, mark the pull request with
-the label `S:backport-to-<backport_branch>`.
-Once the original pull request is merged, the bot will try to cherry-pick the pull request
-to the backport branch. If the bot fails to backport, it will open a pull request.
-The author of the original pull request is responsible for solving the conflicts and
-merging the pull request.
-
-#### Creating a backport branch
-
-If this is the first release candidate for a major release, you get to have the honor of creating
-the backport branch!
-
-Note that, after creating the backport branch, you'll also need to update the tags on `master`
-so that `go mod` is able to order the branches correctly. You should tag `master` with a "dev" tag
-that is "greater than" the backport branches tags. See #6072 for more context.
-
-In the following example, we'll assume that we're making a backport branch for
-the 0.35.x line.
-
-1. Start on `master`
-2. Create the backport branch:
-   `git checkout -b v0.35.x`
-3. Go back to master and tag it as the dev branch for the _next_ major release and push it back up:
-   `git tag -a v0.36.0-dev; git push v0.36.0-dev`
-4. Create a new workflow to run the e2e nightlies for this backport branch.
-   (See https://github.com/tendermint/tendermint/blob/master/.github/workflows/e2e-nightly-34x.yml
-   for an example.)
-
-#### Release candidates
-
-Before creating an official release, especially a major release, we may want to create a
-release candidate (RC) for our friends and partners to test out. We use git tags to
-create RCs, and we build them off of backport branches.
-
-Tags for RCs should follow the "standard" release naming conventions, with `-rcX` at the end
-(for example, `v0.35.0-rc0`).
-
-(Note that branches and tags _cannot_ have the same names, so it's important that these branches
-have distinct names from the tags/release names.)
-
-If this is the first RC for a major release, you'll have to make a new backport branch (see above).
-Otherwise:
-
-1. Start from the backport branch (e.g. `v0.35.x`).
-1. Run the integration tests and the e2e nightlies
-   (which can be triggered from the Github UI;
-   e.g., https://github.com/tendermint/tendermint/actions/workflows/e2e-nightly-34x.yml).
-1. Prepare the changelog:
-   - Move the changes included in `CHANGELOG_PENDING.md` into `CHANGELOG.md`.
-   - Run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for
-     all PRs
-   - Ensure that UPGRADING.md is up-to-date and includes notes on any breaking changes
-      or other upgrading flows.
-   - Bump TMVersionDefault version in  `version.go`
-   - Bump P2P and block protocol versions in  `version.go`, if necessary
-   - Bump ABCI protocol version in `version.go`, if necessary
-1. Open a PR with these changes against the backport branch.
-1. Once these changes have landed on the backport branch, be sure to pull them back down locally.
-2. Once you have the changes locally, create the new tag, specifying a name and a tag "message":
-   `git tag -a v0.35.0-rc0 -m "Release Candidate v0.35.0-rc0`
-3. Push the tag back up to origin:
-   `git push origin v0.35.0-rc0`
-   Now the tag should be available on the repo's releases page.
-4. Future RCs will continue to be built off of this branch.
-
-Note that this process should only be used for "true" RCs--
-release candidates that, if successful, will be the next release.
-For more experimental "RCs," create a new, short-lived branch and tag that instead.
-
-#### Major release
-
-This major release process assumes that this release was preceded by release candidates.
-If there were no release candidates, begin by creating a backport branch, as described above.
-
-1. Start on the backport branch (e.g. `v0.35.x`)
-2. Run integration tests and the e2e nightlies.
-3. Prepare the release:
-   - "Squash" changes from the changelog entries for the RCs into a single entry,
-      and add all changes included in `CHANGELOG_PENDING.md`.
+1. Start on the latest RC branch (`RCx/vX.X.0`).
+2. Run integration tests.
+3. Branch off of the RC branch (`git checkout -b release-prep`) and prepare the release:
+   - "Squash" changes from the changelog entries for the RCs into a single entry, 
+      and add all changes included in `CHANGELOG_PENDING.md`. 
       (Squashing includes both combining all entries, as well as removing or simplifying
       any intra-RC changes. It may also help to alphabetize the entries by package name.)
    - Run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for
-     all PRs
+     all PRs 
    - Ensure that UPGRADING.md is up-to-date and includes notes on any breaking changes
-      or other upgrading flows.
-   - Bump TMVersionDefault version in  `version.go`
+      or other upgrading flows. 
    - Bump P2P and block protocol versions in  `version.go`, if necessary
    - Bump ABCI protocol version in `version.go`, if necessary
-4. Open a PR with these changes against the backport branch.
-5. Once these changes are on the backport branch, push a tag with prepared release details.
-   This will trigger the actual release `v0.35.0`.
-   - `git tag -a v0.35.0 -m 'Release v0.35.0'`
-   - `git push origin v0.35.0`
-7. Make sure that `master` is updated with the latest `CHANGELOG.md`, `CHANGELOG_PENDING.md`, and `UPGRADING.md`.
-8. Add the release to the documentation site generator config (see
-   [DOCS_README.md](./docs/DOCS_README.md) for more details). In summary:
-   - Start on branch `master`.
-   - Add a new line at the bottom of [`docs/versions`](./docs/versions) to
-     ensure the newest release is the default for the landing page.
-   - Add a new entry to `themeConfig.versions` in
-     [`docs/.vuepress/config.js`](./docs/.vuepress/config.js) to include the
-	 release in the dropdown versions menu.
+   - Add any release notes you would like to be added to the body of the release to `release_notes.md`.
+4. Open a PR with these changes against the RC branch (`RCx/vX.X.0`). 
+5. Once these changes are on the RC branch, branch off of the RC branch again to create a release branch:
+   - `git checkout RCx/vX.X.0`
+   - `git checkout -b release/vX.X.0` 
+6. Push a tag with prepared release details. This will trigger the actual release `vX.X.0`.
+   - `git tag -a vX.X.0 -m 'Release vX.X.0'`
+   - `git push origin vX.X.0`
+7. Make sure that `master` is updated with the latest `CHANGELOG.md`, `CHANGELOG_PENDING.md`, and `UPGRADING.md`. 
+8. Create the long-lived minor release branch `RC0/vX.X.1` for the next point release on this
+   new major release series. 
 
-#### Minor release (point releases)
+##### Major Release (from `master`)
+
+1. Start on `master`
+2. Run integration tests (see `test_integrations` in Makefile)
+3. Prepare release in a pull request against `master` (to be squash merged):
+   - Copy `CHANGELOG_PENDING.md` to top of `CHANGELOG.md`; if this release
+      had release candidates, squash all the RC updates into one
+   - Run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for
+     all issues
+   - Run `bash ./scripts/authors.sh` to get a list of authors since the latest
+     release, and add the github aliases of external contributors to the top of
+     the changelog. To lookup an alias from an email, try `bash ./scripts/authors.sh <email>`
+   - Reset the `CHANGELOG_PENDING.md`
+   - Bump P2P and block protocol versions in  `version.go`, if necessary
+   - Bump ABCI protocol version in `version.go`, if necessary
+   - Make sure all significant breaking changes are covered in `UPGRADING.md`
+   - Add any release notes you would like to be added to the body of the release to `release_notes.md`.
+4. Push a tag with prepared release details (this will trigger the release `vX.X.0`)
+   - `git tag -a vX.X.x -m 'Release vX.X.x'`
+   - `git push origin vX.X.x`
+5. Update the `CHANGELOG.md` file on master with the releases changelog.
+6. Delete any RC branches and tags for this release (if applicable)
+
+#### Minor Release (Point Releases)
 
 Minor releases are done differently from major releases: They are built off of long-lived backport branches, rather than from master.
+Each release "line" (e.g. 0.34 or 0.33) has its own long-lived backport branch, and
+the backport branches have names like `v0.34.x` or `v0.33.x` (literally, `x`; it is not a placeholder in this case).
+
 As non-breaking changes land on `master`, they should also be backported (cherry-picked) to these backport branches.
 
-Minor releases don't have release candidates by default, although any tricky changes may merit a release candidate.
+Minor releases don't have release candidates by default, although any tricky changes may merit a release candidate. 
 
 To create a minor release:
 
-1. Checkout the long-lived backport branch: `git checkout v0.35.x`
-2. Run integration tests (`make test_integrations`) and the nightlies.
+1. Checkout the long-lived backport branch: `git checkout vX.X.x`
+2. Run integration tests: `make test_integrations`
 3. Check out a new branch and prepare the release:
    - Copy `CHANGELOG_PENDING.md` to top of `CHANGELOG.md`
    - Run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for all issues
    - Run `bash ./scripts/authors.sh` to get a list of authors since the latest release, and add the GitHub aliases of external contributors to the top of the CHANGELOG. To lookup an alias from an email, try `bash ./scripts/authors.sh <email>`
    - Reset the `CHANGELOG_PENDING.md`
-   - Bump the ABCI version number, if necessary.
-     (Note that ABCI follows semver, and that ABCI versions are the only versions
+   - Bump the ABCI version number, if necessary. 
+     (Note that ABCI follows semver, and that ABCI versions are the only versions 
      which can change during minor releases, and only field additions are valid minor changes.)
-4. Open a PR with these changes that will land them back on `v0.35.x`
+   - Add any release notes you would like to be added to the body of the release to `release_notes.md`.
+4. Open a PR with these changes that will land them back on `vX.X.x`
 5. Once this change has landed on the backport branch, make sure to pull it locally, then push a tag.
-   - `git tag -a v0.35.1 -m 'Release v0.35.1'`
-   - `git push origin v0.35.1`
+   - `git tag -a vX.X.x -m 'Release vX.X.x'`
+   - `git push origin vX.X.x`
 6. Create a pull request back to master with the CHANGELOG & version changes from the latest release.
    - Remove all `R:minor` labels from the pull requests that were included in the release.
    - Do not merge the backport branch into master.
 
+#### Release Candidates
+
+Before creating an official release, especially a major release, we may want to create a
+release candidate (RC) for our friends and partners to test out. We use git tags to
+create RCs, and we build them off of RC branches. RC branches typically have names formatted
+like `RCX/vX.X.X` (or, concretely, `RC0/v0.34.0`), while the tags themselves follow
+the "standard" release naming conventions, with `-rcX` at the end (`vX.X.X-rcX`).
+
+(Note that branches and tags _cannot_ have the same names, so it's important that these branches
+have distinct names from the tags/release names.)
+
+1. Start from the RC branch (e.g. `RC0/v0.34.0`).
+2. Create the new tag, specifying a name and a tag "message":  
+   `git tag -a v0.34.0-rc0 -m "Release Candidate v0.34.0-rc0` 
+3. Push the tag back up to origin:  
+   `git push origin v0.34.0-rc4`  
+   Now the tag should be available on the repo's releases page. 
+4. Create a new release candidate branch for any possible updates to the RC:  
+   `git checkout -b RC1/v0.34.0; git push origin RC1/v0.34.0`
+
 ## Testing
 
-### Unit tests
+All repos should be hooked up to [CircleCI](https://circleci.com/).
 
-Unit tests are located in `_test.go` files as directed by [the Go testing
-package](https://golang.org/pkg/testing/). If you're adding or removing a
-function, please check there's a `TestType_Method` test for it.
-
-Run: `make test`
-
-### Integration tests
-
-Integration tests are also located in `_test.go` files. What differentiates
-them is a more complicated setup, which usually involves setting up two or more
-components.
-
-Run: `make test_integrations`
-
-### End-to-end tests
-
-End-to-end tests are used to verify a fully integrated Tendermint network.
-
-See [README](./test/e2e/README.md) for details.
-
-Run:
-
-```sh
-cd test/e2e && \
-  make && \
-  ./build/runner -f networks/ci.toml
-```
-
-### Model-based tests (ADVANCED)
-
-*NOTE: if you're just submitting your first PR, you won't need to touch these
-most probably (99.9%)*.
-
-For components, that have been [formally
-verified](https://en.wikipedia.org/wiki/Formal_verification) using
-[TLA+](https://en.wikipedia.org/wiki/TLA%2B), it may be possible to generate
-tests using a combination of the [Apalache Model
-Checker](https://apalache.informal.systems/) and [tendermint-rs testgen
-util](https://github.com/informalsystems/tendermint-rs/tree/master/testgen).
-
-Now, I know there's a lot to take in. If you want to learn more, check out [
-this video](https://www.youtube.com/watch?v=aveoIMphzW8) by Andrey Kupriyanov
-& Igor Konnov.
-
-At the moment, we have model-based tests for the light client, located in the
-`./light/mbt` directory.
-
-Run: `cd light/mbt && go test`
-
-### Fuzz tests (ADVANCED)
-
-*NOTE: if you're just submitting your first PR, you won't need to touch these
-most probably (99.9%)*.
-
-[Fuzz tests](https://en.wikipedia.org/wiki/Fuzzing) can be found inside the
-`./test/fuzz` directory. See [README.md](./test/fuzz/README.md) for details.
-
-Run: `cd test/fuzz && make fuzz-{PACKAGE-COMPONENT}`
-
-### Jepsen tests (ADVANCED)
-
-*NOTE: if you're just submitting your first PR, you won't need to touch these
-most probably (99.9%)*.
-
-[Jepsen](http://jepsen.io/) tests are used to verify the
-[linearizability](https://jepsen.io/consistency/models/linearizable) property
-of the Tendermint consensus. They are located in a separate repository
--> <https://github.com/tendermint/jepsen>. Please refer to its README for more
-information.
+If they have `.go` files in the root directory, they will be automatically
+tested by circle using `go test -v -race ./...`. If not, they will need a
+`circle.yml`. Ideally, every repo has a `Makefile` that defines `make test` and
+includes its continuous integration status using a badge in the `README.md`.
 
 ### RPC Testing
 
-**If you contribute to the RPC endpoints it's important to document your
-changes in the [Openapi file](./rpc/openapi/openapi.yaml)**.
-
-To test your changes you must install `nodejs` and run:
+If you contribute to the RPC endpoints it's important to document your changes in the [Openapi file](./rpc/openapi/openapi.yaml)
+To test your changes you should install `nodejs` and run:
 
 ```bash
 npm i -g dredd
@@ -458,8 +369,4 @@ make build-linux build-contract-tests-hooks
 make contract-tests
 ```
 
-**WARNING: these are currently broken due to <https://github.com/apiaryio/dredd>
-not supporting complete OpenAPI 3**.
-
-This command will popup a network and check every endpoint against what has
-been documented.
+This command will popup a network and check every endpoint against what has been documented

DOCKER/Dockerfile

@@ -1,5 +1,5 @@
 # stage 1 Generate Tendermint Binary
-FROM golang:1.16-alpine as builder
+FROM golang:1.15-alpine as builder
 RUN apk update && \
     apk upgrade && \
     apk --no-cache add make

DOCKER/Dockerfile.build_c-amazonlinux

@@ -9,7 +9,7 @@ RUN wget http://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm &
 RUN yum -y groupinstall "Development Tools"
 RUN yum -y install leveldb-devel which
 
-ENV GOVERSION=1.16.5
+ENV GOVERSION=1.12.9
 
 RUN cd /tmp && \
     wget https://dl.google.com/go/go${GOVERSION}.linux-amd64.tar.gz && \

DOCKER/README.md

@@ -31,8 +31,8 @@ To get started developing applications, see the [application developers guide](h
 A quick example of a built-in app and Tendermint core in one container.
 
 ```sh
-docker run -it --rm -v "/tmp:/tendermint" tendermint/tendermint init validator
-docker run -it --rm -v "/tmp:/tendermint" tendermint/tendermint start --proxy-app=kvstore
+docker run -it --rm -v "/tmp:/tendermint" tendermint/tendermint init
+docker run -it --rm -v "/tmp:/tendermint" tendermint/tendermint node --proxy-app=kvstore
 ```
 
 ## Local cluster

DOCKER/docker-entrypoint.sh

@@ -3,7 +3,7 @@ set -e
 
 if [ ! -d "$TMHOME/config" ]; then
 	echo "Running tendermint init to create (default) configuration for docker run."
-	tendermint init validator
+	tendermint init
 
 	sed -i \
 		-e "s/^proxy-app\s*=.*/proxy-app = \"$PROXY_APP\"/" \

Makefile

@@ -1,5 +1,6 @@
 #!/usr/bin/make -f
 
+PACKAGES=$(shell go list ./...)
 BUILDDIR ?= $(CURDIR)/build
 
 BUILD_TAGS?=tendermint
@@ -11,12 +12,10 @@ else
 VERSION := $(shell git describe)
 endif
 
-LD_FLAGS = -X github.com/tendermint/tendermint/version.TMVersion=$(VERSION)
+LD_FLAGS = -X github.com/tendermint/tendermint/version.TMCoreSemVer=$(VERSION)
 BUILD_FLAGS = -mod=readonly -ldflags "$(LD_FLAGS)"
 HTTPS_GIT := https://github.com/tendermint/tendermint.git
-BUILD_IMAGE := ghcr.io/tendermint/docker-build-proto
-BASE_BRANCH := v0.35.x
-DOCKER_PROTO := docker run -v $(shell pwd):/workspace --workdir /workspace $(BUILD_IMAGE)
+DOCKER_BUF := docker run -v $(shell pwd):/workspace --workdir /workspace bufbuild/buf
 CGO_ENABLED ?= 0
 
 # handle nostrip
@@ -59,6 +58,8 @@ LD_FLAGS += $(LDFLAGS)
 all: check build test install
 .PHONY: all
 
+# The below include contains the tools.
+include tools/Makefile
 include test/Makefile
 
 ###############################################################################
@@ -83,44 +84,38 @@ $(BUILDDIR)/:
 proto-all: proto-gen proto-lint proto-check-breaking
 .PHONY: proto-all
 
-check-proto-deps:
-ifeq (,$(shell which protoc-gen-gogofaster))
-	$(error "gogofaster plugin for protoc is required. Run 'go install github.com/gogo/protobuf/protoc-gen-gogofaster@latest' to install")
-endif
-.PHONY: check-proto-deps
-
-check-proto-format-deps:
-ifeq (,$(shell which clang-format))
-	$(error "clang-format is required for Protobuf formatting. See instructions for your platform on how to install it.")
-endif
-.PHONY: check-proto-format-deps
-
-proto-gen: check-proto-deps
-	@echo "Generating Protobuf files"
-	@go run github.com/bufbuild/buf/cmd/buf generate
-	@mv ./proto/tendermint/abci/types.pb.go ./abci/types/
+proto-gen:
+	## If you get the following error,
+	## "error while loading shared libraries: libprotobuf.so.14: cannot open shared object file: No such file or directory"
+	## See https://stackoverflow.com/a/25518702
+	## Note the $< here is substituted for the %.proto
+	## Note the $@ here is substituted for the %.pb.go
+	@sh scripts/protocgen.sh
 .PHONY: proto-gen
 
-# These targets are provided for convenience and are intended for local
-# execution only.
-proto-lint: check-proto-deps
-	@echo "Linting Protobuf files"
-	@go run github.com/bufbuild/buf/cmd/buf lint
+proto-gen-docker:
+	@docker pull -q tendermintdev/docker-build-proto
+	@echo "Generating Protobuf files"
+	@docker run -v $(shell pwd):/workspace --workdir /workspace tendermintdev/docker-build-proto sh ./scripts/protocgen.sh
+.PHONY: proto-gen-docker
+
+proto-lint:
+	@$(DOCKER_BUF) check lint --error-format=json
 .PHONY: proto-lint
 
 proto-format:
-	@echo "Formatting .proto files"
-	@$(DOCKER_PROTO) find ./ -not -path "./third_party/*" -name '*.proto' -exec clang-format -i {} \;
+	@echo "Formatting Protobuf files"
+	docker run -v $(shell pwd):/workspace --workdir /workspace tendermintdev/docker-build-proto find ./ -not -path "./third_party/*" -name *.proto -exec clang-format -i {} \;
 .PHONY: proto-format
 
-proto-check-breaking: check-proto-deps
-	@echo "Checking for breaking changes in Protobuf files against local branch"
-	@echo "Note: This is only useful if your changes have not yet been committed."
-	@echo "      Otherwise read up on buf's \"breaking\" command usage:"
-	@echo "      https://docs.buf.build/breaking/usage"
-	@go run github.com/bufbuild/buf/cmd/buf breaking --against ".git"
+proto-check-breaking:
+	@$(DOCKER_BUF) check breaking --against-input .git#branch=master
 .PHONY: proto-check-breaking
 
+proto-check-breaking-ci:
+	@$(DOCKER_BUF) check breaking --against-input $(HTTPS_GIT)#branch=master
+.PHONY: proto-check-breaking-ci
+
 ###############################################################################
 ###                              Build ABCI                                 ###
 ###############################################################################
@@ -134,7 +129,7 @@ install_abci:
 .PHONY: install_abci
 
 ###############################################################################
-###				Privval Server                              ###
+###                           	Privval Server                              ###
 ###############################################################################
 
 build_privval_server:
@@ -147,11 +142,11 @@ generate_test_cert:
 	# generate server cerificate
 	@certstrap request-cert -cn server -ip 127.0.0.1
 	# self-sign server cerificate with rootCA
-	@certstrap sign server --CA "root CA"
+	@certstrap sign server --CA "root CA" 
 	# generate client cerificate
 	@certstrap request-cert -cn client -ip 127.0.0.1
 	# self-sign client cerificate with rootCA
-	@certstrap sign client --CA "root CA"
+	@certstrap sign client --CA "root CA" 
 .PHONY: generate_test_cert
 
 ###############################################################################
@@ -218,7 +213,7 @@ format:
 
 lint:
 	@echo "--> Running linter"
-	go run github.com/golangci/golangci-lint/cmd/golangci-lint run
+	@golangci-lint run
 .PHONY: lint
 
 DESTINATION = ./index.html.md
@@ -230,7 +225,7 @@ DESTINATION = ./index.html.md
 build-docs:
 	@cd docs && \
 	while read -r branch path_prefix; do \
-		(git checkout $${branch} && npm ci && VUEPRESS_BASE="/$${path_prefix}/" npm run build) ; \
+		(git checkout $${branch} && npm install && VUEPRESS_BASE="/$${path_prefix}/" npm run build) ; \
 		mkdir -p ~/output/$${path_prefix} ; \
 		cp -r .vuepress/dist/* ~/output/$${path_prefix}/ ; \
 		cp ~/output/$${path_prefix}/index.html ~/output ; \
@@ -241,25 +236,18 @@ build-docs:
 ###                            Docker image                                 ###
 ###############################################################################
 
-build-docker:
-	docker build --label=tendermint --tag="tendermint/tendermint" -f DOCKER/Dockerfile .
+build-docker: build-linux
+	cp $(BUILDDIR)/tendermint DOCKER/tendermint
+	docker build --label=tendermint --tag="tendermint/tendermint" DOCKER
+	rm -rf DOCKER/tendermint
 .PHONY: build-docker
 
-
-###############################################################################
-###                                Mocks                                    ###
-###############################################################################
-
-mockery:
-	go generate -run="./scripts/mockery_generate.sh" ./...
-.PHONY: mockery
-
 ###############################################################################
 ###                       Local testnet using docker                        ###
 ###############################################################################
 
 # Build linux binary on other platforms
-build-linux:
+build-linux: tools
 	GOOS=linux GOARCH=amd64 $(MAKE) build
 .PHONY: build-linux
 
@@ -317,25 +305,3 @@ build-reproducible:
 		--name latest-build cosmossdk/rbuilder:latest
 	docker cp -a latest-build:/home/builder/artifacts/ $(CURDIR)/
 .PHONY: build-reproducible
-
-# Implements test splitting and running. This is pulled directly from
-# the github action workflows for better local reproducibility.
-
-GO_TEST_FILES != find $(CURDIR) -name "*_test.go"
-
-# default to four splits by default
-NUM_SPLIT ?= 4
-
-$(BUILDDIR):
-	mkdir -p $@
-
-# The format statement filters out all packages that don't have tests.
-# Note we need to check for both in-package tests (.TestGoFiles) and
-# out-of-package tests (.XTestGoFiles).
-$(BUILDDIR)/packages.txt:$(GO_TEST_FILES) $(BUILDDIR)
-	go list -f "{{ if (or .TestGoFiles .XTestGoFiles) }}{{ .ImportPath }}{{ end }}" ./... | sort > $@
-
-split-test-packages:$(BUILDDIR)/packages.txt
-	split -d -n l/$(NUM_SPLIT) $< $<.
-test-group-%:split-test-packages
-	cat $(BUILDDIR)/packages.txt.$* | xargs go test -mod=readonly -timeout=15m -race -coverprofile=$(BUILDDIR)/$*.profile.out

README.md

@@ -8,8 +8,8 @@ Or [Blockchain](<https://en.wikipedia.org/wiki/Blockchain_(database)>), for shor
 
 [![version](https://img.shields.io/github/tag/tendermint/tendermint.svg)](https://github.com/tendermint/tendermint/releases/latest)
 [![API Reference](https://camo.githubusercontent.com/915b7be44ada53c290eb157634330494ebe3e30a/68747470733a2f2f676f646f632e6f72672f6769746875622e636f6d2f676f6c616e672f6764646f3f7374617475732e737667)](https://pkg.go.dev/github.com/tendermint/tendermint)
-[![Go version](https://img.shields.io/badge/go-1.16-blue.svg)](https://github.com/moovweb/gvm)
-[![Discord chat](https://img.shields.io/discord/669268347736686612.svg)](https://discord.gg/cosmosnetwork)
+[![Go version](https://img.shields.io/badge/go-1.15-blue.svg)](https://github.com/moovweb/gvm)
+[![Discord chat](https://img.shields.io/discord/669268347736686612.svg)](https://discord.gg/vcExX9T)
 [![license](https://img.shields.io/github/license/tendermint/tendermint.svg)](https://github.com/tendermint/tendermint/blob/master/LICENSE)
 [![tendermint/tendermint](https://tokei.rs/b1/github/tendermint/tendermint?category=lines)](https://github.com/tendermint/tendermint)
 [![Sourcegraph](https://sourcegraph.com/github.com/tendermint/tendermint/-/badge.svg)](https://sourcegraph.com/github.com/tendermint/tendermint?badge)
@@ -18,9 +18,10 @@ Or [Blockchain](<https://en.wikipedia.org/wiki/Blockchain_(database)>), for shor
 |--------|--------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------|
 | master | ![Tests](https://github.com/tendermint/tendermint/workflows/Tests/badge.svg?branch=master) | [![codecov](https://codecov.io/gh/tendermint/tendermint/branch/master/graph/badge.svg)](https://codecov.io/gh/tendermint/tendermint) | ![Lint](https://github.com/tendermint/tendermint/workflows/Lint/badge.svg) |
 
-Tendermint Core is a Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine - written in any programming language - and securely replicates it on many machines.
+Tendermint Core is Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine - written in any programming language -
+and securely replicates it on many machines.
 
-For protocol details, see [the specification](https://github.com/tendermint/tendermint/blob/v0.35.x/spec/README.md).
+For protocol details, see [the specification](https://github.com/tendermint/spec).
 
 For detailed analysis of the consensus protocol, including safety and liveness proofs,
 see our recent paper, "[The latest gossip on BFT consensus](https://arxiv.org/abs/1807.04938)".
@@ -29,15 +30,18 @@ see our recent paper, "[The latest gossip on BFT consensus](https://arxiv.org/ab
 
 Please do not depend on master as your production branch. Use [releases](https://github.com/tendermint/tendermint/releases) instead.
 
-Tendermint has been in the production of private and public environments, most notably the blockchains of the Cosmos Network. we haven't released v1.0 yet since we are making breaking changes to the protocol and the APIs.
+Tendermint is being used in production in both private and public environments,
+most notably the blockchains of the [Cosmos Network](https://cosmos.network/).
+However, we are still making breaking changes to the protocol and the APIs and have not yet released v1.0.
 See below for more details about [versioning](#versioning).
 
 In any case, if you intend to run Tendermint in production, we're happy to help. You can
-contact us [over email](mailto:hello@interchain.berlin) or [join the chat](https://discord.gg/cosmosnetwork).
+contact us [over email](mailto:hello@interchain.berlin) or [join the chat](https://discord.gg/vcExX9T).
 
 ## Security
 
-To report a security vulnerability, see our [bug bounty program](https://hackerone.com/cosmos).
+To report a security vulnerability, see our [bug bounty
+program](https://hackerone.com/tendermint). 
 For examples of the kinds of bugs we're looking for, see [our security policy](SECURITY.md).
 
 We also maintain a dedicated mailing list for security updates. We will only ever use this mailing list
@@ -47,7 +51,7 @@ to notify you of vulnerabilities and fixes in Tendermint Core. You can subscribe
 
 | Requirement | Notes            |
 |-------------|------------------|
-| Go version  | Go1.16 or higher |
+| Go version  | Go1.15 or higher |
 
 ## Documentation
 
@@ -60,8 +64,8 @@ See the [install instructions](/docs/introduction/install.md).
 ### Quick Start
 
 - [Single node](/docs/introduction/quick-start.md)
-- [Local cluster using docker-compose](/docs/tools/docker-compose.md)
-- [Remote cluster using Terraform and Ansible](/docs/tools/terraform-and-ansible.md)
+- [Local cluster using docker-compose](/docs/networks/docker-compose.md)
+- [Remote cluster using Terraform and Ansible](/docs/networks/terraform-and-ansible.md)
 - [Join the Cosmos testnet](https://cosmos.network/testnet)
 
 ## Contributing
@@ -70,7 +74,7 @@ Please abide by the [Code of Conduct](CODE_OF_CONDUCT.md) in all interactions.
 
 Before contributing to the project, please take a look at the [contributing guidelines](CONTRIBUTING.md)
 and the [style guide](STYLE_GUIDE.md). You may also find it helpful to read the
-[specifications](https://github.com/tendermint/tendermint/blob/v0.35.x/spec/README.md), watch the [Developer Sessions](/docs/DEV_SESSIONS.md),
+[specifications](https://github.com/tendermint/spec), watch the [Developer Sessions](/docs/DEV_SESSIONS.md), 
 and familiarize yourself with our
 [Architectural Decision Records](https://github.com/tendermint/tendermint/tree/master/docs/architecture).
 
@@ -81,12 +85,32 @@ and familiarize yourself with our
 Tendermint uses [Semantic Versioning](http://semver.org/) to determine when and how the version changes.
 According to SemVer, anything in the public API can change at any time before version 1.0.0
 
-To provide some stability to users of 0.X.X versions of Tendermint, the MINOR version is used
-to signal breaking changes across Tendermint's API. This API includes all
-publicly exposed types, functions, and methods in non-internal Go packages as well as
-the types and methods accessible via the Tendermint RPC interface.
+To provide some stability to Tendermint users in these 0.X.X days, the MINOR version is used
+to signal breaking changes across a subset of the total public API. This subset includes all
+interfaces exposed to other processes (cli, rpc, p2p, etc.), but does not
+include the Go APIs.
 
-Breaking changes to these public APIs will be documented in the CHANGELOG.
+That said, breaking changes in the following packages will be documented in the
+CHANGELOG even if they don't lead to MINOR version bumps:
+
+- crypto
+- config
+- libs
+    - bits
+    - bytes
+    - json
+    - log
+    - math
+    - net
+    - os
+    - protoio
+    - rand
+    - sync
+    - strings
+    - service
+- node
+- rpc/client
+- types
 
 ### Upgrades
 
@@ -94,7 +118,7 @@ In an effort to avoid accumulating technical debt prior to 1.0.0,
 we do not guarantee that breaking changes (ie. bumps in the MINOR version)
 will work with existing Tendermint blockchains. In these cases you will
 have to start a new blockchain, or write something custom to get the old
-data into the new chain. However, any bump in the PATCH version should be
+data into the new chain. However, any bump in the PATCH version should be 
 compatible with existing blockchain histories.
 
 
@@ -143,4 +167,4 @@ If you'd like to work full-time on Tendermint Core, [we're hiring](https://inter
 
 Funding for Tendermint Core development comes primarily from the [Interchain Foundation](https://interchain.io),
 a Swiss non-profit. The Tendermint trademark is owned by [Tendermint Inc.](https://tendermint.com), the for-profit entity
- that also maintains [tendermint.com](https://tendermint.com).
+ that also maintains [tendermint.com](https://tendermint.com).

SECURITY.md

@@ -7,55 +7,54 @@ Policy](https://tendermint.com/security), we operate a [bug
 bounty](https://hackerone.com/tendermint).
 See the policy for more details on submissions and rewards, and see "Example Vulnerabilities" (below) for examples of the kinds of bugs we're most interested in.
 
-### Guidelines
+### Guidelines 
 
 We require that all researchers:
 
 * Use the bug bounty to disclose all vulnerabilities, and avoid posting vulnerability information in public places, including Github Issues, Discord channels, and Telegram groups
 * Make every effort to avoid privacy violations, degradation of user experience, disruption to production systems (including but not limited to the Cosmos Hub), and destruction of data
-* Keep any information about vulnerabilities that you’ve discovered confidential between yourself and the Tendermint Core engineering team until the issue has been resolved and disclosed
+* Keep any information about vulnerabilities that you’ve discovered confidential between yourself and the Tendermint Core engineering team until the issue has been resolved and disclosed 
 * Avoid posting personally identifiable information, privately or publicly
 
 If you follow these guidelines when reporting an issue to us, we commit to:
 
 * Not pursue or support any legal action related to your research on this vulnerability
-* Work with you to understand, resolve and ultimately disclose the issue in a timely fashion
+* Work with you to understand, resolve and ultimately disclose the issue in a timely fashion 
 
-## Disclosure Process
+## Disclosure Process 
 
 Tendermint Core uses the following disclosure process:
 
-1. Once a security report is received, the Tendermint Core team works to verify the issue and confirm its severity level using CVSS.
-2. The Tendermint Core team collaborates with the Gaia team to determine the vulnerability’s potential impact on the Cosmos Hub.
-3. Patches are prepared for eligible releases of Tendermint in private repositories. See “Supported Releases” below for more information on which releases are considered eligible.
-4. If it is determined that a CVE-ID is required, we request a CVE through a CVE Numbering Authority.
+1. Once a security report is received, the Tendermint Core team works to verify the issue and confirm its severity level using CVSS. 
+2. The Tendermint Core team collaborates with the Gaia team to determine the vulnerability’s potential impact on the Cosmos Hub. 
+3. Patches are prepared for eligible releases of Tendermint in private repositories. See “Supported Releases” below for more information on which releases are considered eligible. 
+4. If it is determined that a CVE-ID is required, we request a CVE through a CVE Numbering Authority. 
 5. We notify the community that a security release is coming, to give users time to prepare their systems for the update. Notifications can include forum posts, tweets, and emails to partners and validators, including emails sent to the [Tendermint Security Mailing List](https://berlin.us4.list-manage.com/subscribe?u=431b35421ff7edcc77df5df10&id=3fe93307bc).
-6. 24 hours following this notification, the fixes are applied publicly and new releases are issued.
-7. Cosmos SDK and Gaia update their Tendermint Core dependencies to use these releases, and then themselves issue new releases.
-8. Once releases are available for Tendermint Core, Cosmos SDK and Gaia, we notify the community, again, through the same channels as above. We also publish a Security Advisory on Github and publish the CVE, as long as neither the Security Advisory nor the CVE include any information on how to exploit these vulnerabilities beyond what information is already available in the patch itself.
-9. Once the community is notified, we will pay out any relevant bug bounties to submitters.
-10. One week after the releases go out, we will publish a post with further details on the vulnerability as well as our response to it.
+6. 24 hours following this notification, the fixes are applied publicly and new releases are issued. 
+7. Cosmos SDK and Gaia update their Tendermint Core dependencies to use these releases, and then themselves issue new releases. 
+8. Once releases are available for Tendermint Core, Cosmos SDK and Gaia, we notify the community, again, through the same channels as above. We also publish a Security Advisory on Github and publish the CVE, as long as neither the Security Advisory nor the CVE include any information on how to exploit these vulnerabilities beyond what information is already available in the patch itself. 
+9. Once the community is notified, we will pay out any relevant bug bounties to submitters. 
+10. One week after the releases go out, we will publish a post with further details on the vulnerability as well as our response to it. 
 
-This process can take some time. Every effort will be made to handle the bug in as timely a manner as possible, however it's important that we follow the process described above to ensure that disclosures are handled consistently and to keep Tendermint Core and its downstream dependent projects--including but not limited to Gaia and the Cosmos Hub--as secure as possible.
+This process can take some time. Every effort will be made to handle the bug in as timely a manner as possible, however it's important that we follow the process described above to ensure that disclosures are handled consistently and to keep Tendermint Core and its downstream dependent projects--including but not limited to Gaia and the Cosmos Hub--as secure as possible. 
 
-### Example Timeline
+### Example Timeline 
 
-The following is an example timeline for the triage and response. The required roles and team members are described in parentheses after each task; however, multiple people can play each role and each person may play multiple roles.
+The following is an example timeline for the triage and response. The required roles and team members are described in parentheses after each task; however, multiple people can play each role and each person may play multiple roles. 
 
-#### 24+ Hours Before Release Time
+#### > 24 Hours Before Release Time
 
-1. Request CVE number (ADMIN)
-2. Gather emails and other contact info for validators (COMMS LEAD)
-3. Create patches in a private security repo, and ensure that PRs are open targeting all relevant release branches (TENDERMINT ENG, TENDERMINT LEAD)
-4. Test fixes on a testnet  (TENDERMINT ENG, COSMOS SDK ENG)
-5. Write “Security Advisory” for forum (TENDERMINT LEAD)
+1. Request CVE number (ADMIN) 
+2. Gather emails and other contact info for validators (COMMS LEAD) 
+3. Test fixes on a testnet  (TENDERMINT ENG, COSMOS ENG) 
+4. Write “Security Advisory” for forum (TENDERMINT LEAD) 
 
 #### 24 Hours Before Release Time
 
-1. Post “Security Advisory” pre-notification on forum (TENDERMINT LEAD)
-2. Post Tweet linking to forum post (COMMS LEAD)
-3. Announce security advisory/link to post in various other social channels (Telegram, Discord) (COMMS LEAD)
-4. Send emails to validators or other users (PARTNERSHIPS LEAD)
+1. Post “Security Advisory” pre-notification on forum (TENDERMINT LEAD) 
+2. Post Tweet linking to forum post (COMMS LEAD) 
+3. Announce security advisory/link to post in various other social channels (Telegram, Discord) (COMMS LEAD) 
+4. Send emails to validators or other users (PARTNERSHIPS LEAD) 
 
 #### Release Time
 
@@ -65,36 +64,36 @@ The following is an example timeline for the triage and response. The required r
 4. Post “Security releases” on forum (TENDERMINT LEAD)
 5. Post new Tweet linking to forum post (COMMS LEAD)
 6. Remind everyone via social channels (Telegram, Discord)  that the release is out (COMMS LEAD)
-7. Send emails to validators or other users (COMMS LEAD)
-8. Publish Security Advisory and CVE, if CVE has no sensitive information (ADMIN)
+7. Send emails to validators or other users (COMMS LEAD) 
+8. Publish Security Advisory and CVE, if CVE has no sensitive information (ADMIN) 
 
 #### After Release Time
 
 1. Write forum post with exploit details (TENDERMINT LEAD)
-2. Approve pay-out on HackerOne for submitter (ADMIN)
+2. Approve pay-out on HackerOne for submitter (ADMIN) 
 
 #### 7 Days After Release Time
 
-1. Publish CVE if it has not yet been published (ADMIN)
+1. Publish CVE if it has not yet been published (ADMIN) 
 2. Publish forum post with exploit details (TENDERMINT ENG, TENDERMINT LEAD)
 
 ## Supported Releases
 
-The Tendermint Core team commits to releasing security patch releases for both the latest minor release as well for the major/minor release that the Cosmos Hub is running.
+The Tendermint Core team commits to releasing security patch releases for both the latest minor release as well for the major/minor release that the Cosmos Hub is running. 
 
-If you are running older versions of Tendermint Core, we encourage you to upgrade at your earliest opportunity so that you can receive security patches directly from the Tendermint repo. While you are welcome to backport security patches to older versions for your own use, we will not publish or promote these backports.
+If you are running older versions of Tendermint Core, we encourage you to upgrade at your earliest opportunity so that you can receive security patches directly from the Tendermint repo. While you are welcome to backport security patches to older versions for your own use, we will not publish or promote these backports. 
 
 ## Scope
 
 The full scope of our bug bounty program is outlined on our [Hacker One program page](https://hackerone.com/tendermint). Please also note that, in the interest of the safety of our users and staff, a few things are explicitly excluded from scope:
 
-* Any third-party services
-* Findings from physical testing, such as office access
+* Any third-party services 
+* Findings from physical testing, such as office access 
 * Findings derived from social engineering (e.g., phishing)
 
-## Example Vulnerabilities
+## Example Vulnerabilities 
 
-The following is a list of examples of the kinds of vulnerabilities that we’re most interested in. It is not exhaustive: there are other kinds of issues we may also be interested in!
+The following is a list of examples of the kinds of vulnerabilities that we’re most interested in. It is not exhaustive: there are other kinds of issues we may also be interested in! 
 
 ### Specification
 
@@ -115,9 +114,6 @@ Assuming less than 1/3 of the voting power is Byzantine (malicious):
 * A node halting (liveness failure)
 * Syncing new and old nodes
 
-Assuming more than 1/3 the voting power is Byzantine:
-
-* Attacks that go unpunished (unhandled evidence)
 
 ### Networking
 
@@ -143,7 +139,7 @@ Attacks may come through the P2P network or the RPC layer:
 
 ### Libraries
 
-* Serialization
+* Serialization (Amino)
 * Reading/Writing files and databases
 
 ### Cryptography
@@ -154,5 +150,5 @@ Attacks may come through the P2P network or the RPC layer:
 
 ### Light Client
 
-* Core verification
+* Core verification 
 * Bisection/sequential algorithms

UPGRADING.md

@@ -2,233 +2,43 @@
 
 This guide provides instructions for upgrading to specific versions of Tendermint Core.
 
-## v0.35
+## Unreleased
 
 ### ABCI Changes
 
 * Added `AbciVersion` to `RequestInfo`. Applications should check that the ABCI version they expect is being used in order to avoid unimplemented changes errors.
+
 * The method `SetOption` has been removed from the ABCI.Client interface. This feature was used in the early ABCI implementation's.
+
 * Messages are written to a byte stream using uin64 length delimiters instead of int64.
-* When mempool `v1` is enabled, transactions broadcasted via `sync` mode may return a successful
-  response with a transaction hash indicating that the transaction was successfully inserted into
-  the mempool. While this is true for `v0`, the `v1` mempool reactor may at a later point in time
-  evict or even drop this transaction after a hash has been returned. Thus, the user or client must
-  query for that transaction to check if it is still in the mempool.
 
 ### Config Changes
 
-* The configuration file field `[fastsync]` has been renamed to `[blocksync]`.
-
-* The top level configuration file field `fast-sync` has moved under the new `[blocksync]`
-  field as `blocksync.enable`.
-
-* `blocksync.version = "v1"` and `blocksync.version = "v2"` (previously `fastsync`)
-  are no longer supported. Please use `v0` instead. During the v0.35 release cycle, `v0` was
-  determined to suit the existing needs and the cost of maintaining the `v1` and `v2` modules
-  was determined to be greater than necessary.
-
+* `fast_sync = "v1"` is no longer supported. Please use `v2` instead.
 
 * All config parameters are now hyphen-case (also known as kebab-case) instead of snake_case. Before restarting the node make sure
-  you have updated all the variables in your `config.toml` file.
-
-* Added `--mode` flag and `mode` config variable on `config.toml` for setting Mode of the Node: `full` | `validator` | `seed` (default: `full`)
-  [ADR-52](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-052-tendermint-mode.md)
-
-* `BootstrapPeers` has been added as part of the new p2p stack. This will eventually replace
-  `Seeds`. Bootstrap peers are connected with on startup if needed for peer discovery. Unlike
-  persistent peers, there's no gaurantee that the node will remain connected with these peers.
-
-* configuration values starting with `priv-validator-` have moved to the new
-  `priv-validator` section, without the `priv-validator-` prefix.
-
-* The fast sync process as well as the blockchain package and service has all
-  been renamed to block sync
-
-* We have added a new, experimental tool to help operators migrate
-  configuration files created by previous versions of Tendermint.
-  To try this tool, run:
-
-  ```shell
-  # Install the tool.
-  go install github.com/tendermint/tendermint/scripts/confix@v0.35.x
-
-  # Run the tool with the old configuration file as input.
-  # Replace the -config argument with your path.
-  confix -config ~/.tendermint/config/config.toml -out updated.toml
-  ```
-
-  This tool should be able to update configurations from v0.34 to v0.35.  We
-  plan to extend it to handle older configuration files in the future. For now,
-  it will report an error (without making any changes) if it does not recognize
-  the version that created the file.
-
-### Database Key Format Changes
-
-The format of all tendermint on-disk database keys changes in
-0.35. Upgrading nodes must either re-sync all data or run a migration
-script provided in this release.
-
-The script located in
-`github.com/tendermint/tendermint/scripts/keymigrate/migrate.go` provides the
-function `Migrate(context.Context, db.DB)` which you can operationalize as
-makes sense for your deployment.
-
-For ease of use the `tendermint` command includes a CLI version of the
-migration script, which you can invoke, as in:
-
-	tendermint key-migrate
-
-This reads the configuration file as normal and allows the `--db-backend` and
-`--db-dir` flags to override the database location as needed.
-
-The migration operation is intended to be idempotent, and should be safe to
-rerun on the same database multiple times.  As a safety measure, however, we
-recommend that operators test out the migration on a copy of the database
-first, if it is practical to do so, before applying it to the production data.
+  you have updated all the variables in your `config.toml` file. 
 
 ### CLI Changes
 
-* You must now specify the node mode (validator|full|seed) in `tendermint init [mode]`
-
-* The `--fast-sync` command line option has been renamed to `--blocksync.enable`
-
 * If you had previously used `tendermint gen_node_key` to generate a new node
   key, keep in mind that it no longer saves the output to a file. You can use
-  `tendermint init validator` or pipe the output of `tendermint gen_node_key` to
+  `tendermint init` or pipe the output of `tendermint gen_node_key` to
   `$TMHOME/config/node_key.json`:
 
   ```
   $ tendermint gen_node_key > $TMHOME/config/node_key.json
   ```
 
-* CLI commands and flags are all now hyphen-case instead of snake_case.
+* CLI commands and flags are all now hyphen-case instead of snake_case. 
   Make sure to adjust any scripts that calls a cli command with snake_casing
-
-### API Changes
-
-The p2p layer was reimplemented as part of the 0.35 release cycle and
-all reactors were refactored to accomodate the change. As part of that work these
-implementations moved into the `internal` package and are no longer
-considered part of the public Go API of tendermint. These packages
-are:
-
-- `p2p`
-- `mempool`
-- `consensus`
-- `statesync`
-- `blockchain`
-- `evidence`
-
-Accordingly, the `node` package changed to reduce access to
-tendermint internals: applications that use tendermint as a library
-will need to change to accommodate these changes. Most notably:
-
-- The `Node` type has become internal, and all constructors return a
-  `service.Service` implementation.
-
-- The `node.DefaultNewNode` and `node.NewNode` constructors are no
-  longer exported and have been replaced with `node.New` and
-  `node.NewDefault` which provide more functional interfaces.
-
-To access any of the functionality previously available via the
-`node.Node` type, use the `*local.Local` "RPC" client, that exposes
-the full RPC interface provided as direct function calls. Import the
-`github.com/tendermint/tendermint/rpc/client/local` package and pass
-the node service as in the following:
-
-```go
-    node := node.NewDefault() //construct the node object
-    // start and set up the node service
-
-    client := local.New(node.(local.NodeService))
-    // use client object to interact with the node
-```
-
-### gRPC Support
-
-Mark gRPC in the RPC layer as deprecated and to be removed in 0.36.
-
-### Peer Management Interface
-
-When running with the new P2P Layer, the methods `UnsafeDialSeeds` and
-`UnsafeDialPeers` RPC methods will always return an error. They are
-deprecated and will be removed in 0.36 when the legacy peer stack is
-removed.
-
-Additionally the format of the Peer list returned in the `NetInfo`
-method changes in this release to accommodate the different way that
-the new stack tracks data about peers. This change affects users of
-both stacks.
-
-### Using the updated p2p library
-
-The P2P library was reimplemented in this release. The new implementation is
-enabled by default in this version of Tendermint. The legacy implementation is still
-included in this version of Tendermint as a backstop to work around unforeseen
-production issues. The new and legacy version are interoperable. If necessary,
-you can enable the legacy implementation in the server configuration file.
-
-To make use of the legacy P2P implemementation add or update the following field of
-your server's configuration file under the `[p2p]` section:
-
-```toml
-[p2p]
-...
-use-legacy = true
-...
-```
-
-If you need to do this, please consider filing an issue in the Tendermint repository
-to let us know why. We plan to remove the legacy P2P code in the next (v0.36) release.
-
-#### New p2p queue types
-
-The new p2p implementation enables selection of the queue type to be used for
-passing messages between peers.
-
-The following values may be used when selecting which queue type to use:
-
-* `fifo`: (**default**) An unbuffered and lossless queue that passes messages through
-in the order in which they were received.
-
-* `priority`: A priority queue of messages.
-
-* `wdrr`: A queue implementing the Weighted Deficit Round Robin algorithm. A
-weighted deficit round robin queue is created per peer. Each queue contains a
-separate 'flow' for each of the channels of communication that exist between any two
-peers. Tendermint maintains a channel per message type between peers. Each WDRR
-queue maintains a shared buffered with a fixed capacity through which messages on different
-flows are passed.
-For more information on WDRR scheduling, see: https://en.wikipedia.org/wiki/Deficit_round_robin
-
-To select a queue type, add or update the following field under the `[p2p]`
-section of your server's configuration file.
-
-```toml
-[p2p]
-...
-queue-type = wdrr
-...
-```
-
-
-### Support for Custom Reactor and Mempool Implementations
-
-The changes to p2p layer removed existing support for custom
-reactors. Based on our understanding of how this functionality was
-used, the introduction of the prioritized mempool covers nearly all of
-the use cases for custom reactors. If you are currently running custom
-reactors and mempools and are having trouble seeing the migration path
-for your project please feel free to reach out to the Tendermint Core
-development team directly.
-
 ## v0.34.0
 
 **Upgrading to Tendermint 0.34 requires a blockchain restart.**
 This release is not compatible with previous blockchains due to changes to
 the encoding format (see "Protocol Buffers," below) and the block header (see "Blockchain Protocol").
 
-Note also that Tendermint 0.34 also requires Go 1.16 or higher.
+Note also that Tendermint 0.34 also requires Go 1.15 or higher.
 
 ### ABCI Changes
 
@@ -375,8 +185,8 @@ Other user-relevant changes include:
 
 * The old `lite` package was removed; the new light client uses the `light` package.
 * The `Verifier` was broken up into two pieces:
-	* Core verification logic (pure `VerifyX` functions)
-	* `Client` object, which represents the complete light client
+    * Core verification logic (pure `VerifyX` functions)
+    * `Client` object, which represents the complete light client
 * The new light clients stores headers & validator sets as `LightBlock`s
 * The RPC client can be found in the `/rpc` directory.
 * The HTTP(S) proxy is located in the `/proxy` directory.
@@ -508,12 +318,12 @@ Evidence Params has been changed to include duration.
 ### Go API
 
 * `libs/common` has been removed in favor of specific pkgs.
-	* `async`
-	* `service`
-	* `rand`
-	* `net`
-	* `strings`
-	* `cmap`
+    * `async`
+    * `service`
+    * `rand`
+    * `net`
+    * `strings`
+    * `cmap`
 * removal of `errors` pkg
 
 ### RPC Changes
@@ -582,9 +392,9 @@ Prior to the update, suppose your `ResponseDeliverTx` look like:
 ```go
 abci.ResponseDeliverTx{
   Tags: []kv.Pair{
-	{Key: []byte("sender"), Value: []byte("foo")},
-	{Key: []byte("recipient"), Value: []byte("bar")},
-	{Key: []byte("amount"), Value: []byte("35")},
+    {Key: []byte("sender"), Value: []byte("foo")},
+    {Key: []byte("recipient"), Value: []byte("bar")},
+    {Key: []byte("amount"), Value: []byte("35")},
   }
 }
 ```
@@ -603,14 +413,14 @@ the following `Events`:
 ```go
 abci.ResponseDeliverTx{
   Events: []abci.Event{
-	{
-	  Type: "transfer",
-	  Attributes: kv.Pairs{
-		{Key: []byte("sender"), Value: []byte("foo")},
-		{Key: []byte("recipient"), Value: []byte("bar")},
-		{Key: []byte("amount"), Value: []byte("35")},
-	  },
-	}
+    {
+      Type: "transfer",
+      Attributes: kv.Pairs{
+        {Key: []byte("sender"), Value: []byte("foo")},
+        {Key: []byte("recipient"), Value: []byte("bar")},
+        {Key: []byte("amount"), Value: []byte("35")},
+      },
+    }
 }
 ```
 
@@ -658,9 +468,9 @@ In this case, the WS client will receive an error with description:
   "jsonrpc": "2.0",
   "id": "{ID}#event",
   "error": {
-	"code": -32000,
-	"msg": "Server error",
-	"data": "subscription was canceled (reason: client is not pulling messages fast enough)" // or "subscription was canceled (reason: Tendermint exited)"
+    "code": -32000,
+    "msg": "Server error",
+    "data": "subscription was cancelled (reason: client is not pulling messages fast enough)" // or "subscription was cancelled (reason: Tendermint exited)"
   }
 }
 
@@ -713,14 +523,14 @@ due to changes in how various data structures are hashed.
 Any implementations of Tendermint blockchain verification, including lite clients,
 will need to be updated. For specific details:
 
-* [Merkle tree](https://github.com/tendermint/tendermint/blob/v0.35.x/spec/blockchain/encoding.md#merkle-trees)
-* [ConsensusParams](https://github.com/tendermint/tendermint/blob/v0.35.x/spec/blockchain/state.md#consensusparams)
+* [Merkle tree](https://github.com/tendermint/spec/blob/master/spec/blockchain/encoding.md#merkle-trees)
+* [ConsensusParams](https://github.com/tendermint/spec/blob/master/spec/blockchain/state.md#consensusparams)
 
 There was also a small change to field ordering in the vote struct. Any
 implementations of an out-of-process validator (like a Key-Management Server)
 will need to be updated. For specific details:
 
-* [Vote](https://github.com/tendermint/tendermint/blob/v0.35.x/spec/consensus/signing.md#votes)
+* [Vote](https://github.com/tendermint/spec/blob/master/spec/consensus/signing.md#votes)
 
 Finally, the proposer selection algorithm continues to evolve. See the
 [work-in-progress
@@ -866,9 +676,9 @@ just the `Data` field set:
 
 ```go
 []ProofOp{
-	ProofOp{
-		Data: <proof bytes>,
-	}
+    ProofOp{
+        Data: <proof bytes>,
+    }
 }
 ```
 

abci/README.md

@@ -19,7 +19,7 @@ To get up and running quickly, see the [getting started guide](../docs/app-dev/g
 
 A detailed description of the ABCI methods and message types is contained in:
 
-- [The main spec](https://github.com/tendermint/tendermint/blob/master/spec/abci/abci.md)
+- [The main spec](https://github.com/tendermint/spec/blob/master/spec/abci/abci.md)
 - [A protobuf file](../proto/tendermint/abci/types.proto)
 - [A Go interface](./types/application.go)
 

abci/client/client.go

@@ -1,4 +1,4 @@
-package abciclient
+package abcicli
 
 import (
 	"context"
@@ -6,8 +6,8 @@ import (
 	"sync"
 
 	"github.com/tendermint/tendermint/abci/types"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
 	"github.com/tendermint/tendermint/libs/service"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
 )
 
 const (
@@ -15,7 +15,7 @@ const (
 	echoRetryIntervalSeconds = 1
 )
 
-//go:generate ../../scripts/mockery_generate.sh Client
+//go:generate mockery --case underscore --name Client
 
 // Client defines an interface for an ABCI client.
 //
@@ -80,22 +80,20 @@ func NewClient(addr, transport string, mustConnect bool) (client Client, err err
 	return
 }
 
+//----------------------------------------
+
 type Callback func(*types.Request, *types.Response)
 
+//----------------------------------------
+
 type ReqRes struct {
 	*types.Request
 	*sync.WaitGroup
 	*types.Response // Not set atomically, so be sure to use WaitGroup.
 
-	mtx tmsync.Mutex
-
-	// callbackInvoked as a variable to track if the callback was already
-	// invoked during the regular execution of the request. This variable
-	// allows clients to set the callback simultaneously without potentially
-	// invoking the callback twice by accident, once when 'SetCallback' is
-	// called and once during the normal request.
-	callbackInvoked bool
-	cb              func(*types.Response) // A single callback that may be set.
+	mtx  tmsync.Mutex
+	done bool                  // Gets set to true once *after* WaitGroup.Done().
+	cb   func(*types.Response) // A single callback that may be set.
 }
 
 func NewReqRes(req *types.Request) *ReqRes {
@@ -104,49 +102,39 @@ func NewReqRes(req *types.Request) *ReqRes {
 		WaitGroup: waitGroup1(),
 		Response:  nil,
 
-		callbackInvoked: false,
-		cb:              nil,
+		done: false,
+		cb:   nil,
 	}
 }
 
-// Sets sets the callback. If reqRes is already done, it will call the cb
-// immediately. Note, reqRes.cb should not change if reqRes.done and only one
-// callback is supported.
-func (r *ReqRes) SetCallback(cb func(res *types.Response)) {
-	r.mtx.Lock()
+// Sets the callback for this ReqRes atomically.
+// If reqRes is already done, calls cb immediately.
+// NOTE: reqRes.cb should not change if reqRes.done.
+// NOTE: only one callback is supported.
+func (reqRes *ReqRes) SetCallback(cb func(res *types.Response)) {
+	reqRes.mtx.Lock()
 
-	if r.callbackInvoked {
-		r.mtx.Unlock()
-		cb(r.Response)
+	if reqRes.done {
+		reqRes.mtx.Unlock()
+		cb(reqRes.Response)
 		return
 	}
 
-	r.cb = cb
-	r.mtx.Unlock()
+	reqRes.cb = cb
+	reqRes.mtx.Unlock()
 }
 
-// InvokeCallback invokes a thread-safe execution of the configured callback
-// if non-nil.
-func (r *ReqRes) InvokeCallback() {
-	r.mtx.Lock()
-	defer r.mtx.Unlock()
-
-	if r.cb != nil {
-		r.cb(r.Response)
-	}
-	r.callbackInvoked = true
+func (reqRes *ReqRes) GetCallback() func(*types.Response) {
+	reqRes.mtx.Lock()
+	defer reqRes.mtx.Unlock()
+	return reqRes.cb
 }
 
-// GetCallback returns the configured callback of the ReqRes object which may be
-// nil. Note, it is not safe to concurrently call this in cases where it is
-// marked done and SetCallback is called before calling GetCallback as that
-// will invoke the callback twice and create a potential race condition.
-//
-// ref: https://github.com/tendermint/tendermint/issues/5439
-func (r *ReqRes) GetCallback() func(*types.Response) {
-	r.mtx.Lock()
-	defer r.mtx.Unlock()
-	return r.cb
+// NOTE: it should be safe to read reqRes.cb without locks after this.
+func (reqRes *ReqRes) SetDone() {
+	reqRes.mtx.Lock()
+	reqRes.done = true
+	reqRes.mtx.Unlock()
 }
 
 func waitGroup1() (wg *sync.WaitGroup) {

abci/client/creators.go

@@ -1,35 +0,0 @@
-package abciclient
-
-import (
-	"fmt"
-
-	"github.com/tendermint/tendermint/abci/types"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
-)
-
-// Creator creates new ABCI clients.
-type Creator func() (Client, error)
-
-// NewLocalCreator returns a Creator for the given app,
-// which will be running locally.
-func NewLocalCreator(app types.Application) Creator {
-	mtx := new(tmsync.Mutex)
-
-	return func() (Client, error) {
-		return NewLocalClient(mtx, app), nil
-	}
-}
-
-// NewRemoteCreator returns a Creator for the given address (e.g.
-// "192.168.0.1") and transport (e.g. "tcp"). Set mustConnect to true if you
-// want the client to connect before reporting success.
-func NewRemoteCreator(addr, transport string, mustConnect bool) Creator {
-	return func() (Client, error) {
-		remoteApp, err := NewClient(addr, transport, mustConnect)
-		if err != nil {
-			return nil, fmt.Errorf("failed to connect to proxy: %w", err)
-		}
-
-		return remoteApp, nil
-	}
-}

abci/client/doc.go

@@ -1,4 +1,4 @@
-// Package abciclient provides an ABCI implementation in Go.
+// Package abcicli provides an ABCI implementation in Go.
 //
 // There are 3 clients available:
 //		1. socket (unix or TCP)
@@ -26,4 +26,4 @@
 //
 // sync: waits for all Async calls to complete (essentially what Flush does in
 // the socket client) and calls Sync method.
-package abciclient
+package abcicli

abci/client/grpc_client.go

@@ -1,4 +1,4 @@
-package abciclient
+package abcicli
 
 import (
 	"context"
@@ -8,12 +8,11 @@ import (
 	"time"
 
 	"google.golang.org/grpc"
-	"google.golang.org/grpc/credentials/insecure"
 
 	"github.com/tendermint/tendermint/abci/types"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
 	tmnet "github.com/tendermint/tendermint/libs/net"
 	"github.com/tendermint/tendermint/libs/service"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
 )
 
 // A gRPC client.
@@ -72,6 +71,7 @@ func (cli *grpcClient) OnStart() error {
 			cli.mtx.Lock()
 			defer cli.mtx.Unlock()
 
+			reqres.SetDone()
 			reqres.Done()
 
 			// Notify client listener if set
@@ -80,7 +80,9 @@ func (cli *grpcClient) OnStart() error {
 			}
 
 			// Notify reqRes listener if set
-			reqres.InvokeCallback()
+			if cb := reqres.GetCallback(); cb != nil {
+				cb(reqres.Response)
+			}
 		}
 		for reqres := range cli.chReqRes {
 			if reqres != nil {
@@ -93,10 +95,7 @@ func (cli *grpcClient) OnStart() error {
 
 RETRY_LOOP:
 	for {
-		conn, err := grpc.Dial(cli.addr,
-			grpc.WithTransportCredentials(insecure.NewCredentials()),
-			grpc.WithContextDialer(dialerFunc),
-		)
+		conn, err := grpc.Dial(cli.addr, grpc.WithInsecure(), grpc.WithContextDialer(dialerFunc))
 		if err != nil {
 			if cli.mustConnect {
 				return err

abci/client/local_client.go

@@ -1,11 +1,11 @@
-package abciclient
+package abcicli
 
 import (
 	"context"
 
 	types "github.com/tendermint/tendermint/abci/types"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
 	"github.com/tendermint/tendermint/libs/service"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
 )
 
 // NOTE: use defer to unlock mutex because Application might panic (e.g., in
@@ -348,13 +348,12 @@ func (app *localClient) ApplySnapshotChunkSync(
 
 func (app *localClient) callback(req *types.Request, res *types.Response) *ReqRes {
 	app.Callback(req, res)
-	rr := newLocalReqRes(req, res)
-	rr.callbackInvoked = true
-	return rr
+	return newLocalReqRes(req, res)
 }
 
 func newLocalReqRes(req *types.Request, res *types.Response) *ReqRes {
 	reqRes := NewReqRes(req)
 	reqRes.Response = res
+	reqRes.SetDone()
 	return reqRes
 }

abci/client/mocks/client.go

@@ -1,11 +1,11 @@
-// Code generated by mockery. DO NOT EDIT.
+// Code generated by mockery v2.3.0. DO NOT EDIT.
 
 package mocks
 
 import (
 	context "context"
 
-	abciclient "github.com/tendermint/tendermint/abci/client"
+	abcicli "github.com/tendermint/tendermint/abci/client"
 
 	log "github.com/tendermint/tendermint/libs/log"
 
@@ -20,15 +20,15 @@ type Client struct {
 }
 
 // ApplySnapshotChunkAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) ApplySnapshotChunkAsync(_a0 context.Context, _a1 types.RequestApplySnapshotChunk) (*abciclient.ReqRes, error) {
+func (_m *Client) ApplySnapshotChunkAsync(_a0 context.Context, _a1 types.RequestApplySnapshotChunk) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestApplySnapshotChunk) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestApplySnapshotChunk) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -66,15 +66,15 @@ func (_m *Client) ApplySnapshotChunkSync(_a0 context.Context, _a1 types.RequestA
 }
 
 // BeginBlockAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) BeginBlockAsync(_a0 context.Context, _a1 types.RequestBeginBlock) (*abciclient.ReqRes, error) {
+func (_m *Client) BeginBlockAsync(_a0 context.Context, _a1 types.RequestBeginBlock) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestBeginBlock) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestBeginBlock) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -112,15 +112,15 @@ func (_m *Client) BeginBlockSync(_a0 context.Context, _a1 types.RequestBeginBloc
 }
 
 // CheckTxAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) CheckTxAsync(_a0 context.Context, _a1 types.RequestCheckTx) (*abciclient.ReqRes, error) {
+func (_m *Client) CheckTxAsync(_a0 context.Context, _a1 types.RequestCheckTx) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestCheckTx) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestCheckTx) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -158,15 +158,15 @@ func (_m *Client) CheckTxSync(_a0 context.Context, _a1 types.RequestCheckTx) (*t
 }
 
 // CommitAsync provides a mock function with given fields: _a0
-func (_m *Client) CommitAsync(_a0 context.Context) (*abciclient.ReqRes, error) {
+func (_m *Client) CommitAsync(_a0 context.Context) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context) *abcicli.ReqRes); ok {
 		r0 = rf(_a0)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -204,15 +204,15 @@ func (_m *Client) CommitSync(_a0 context.Context) (*types.ResponseCommit, error)
 }
 
 // DeliverTxAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) DeliverTxAsync(_a0 context.Context, _a1 types.RequestDeliverTx) (*abciclient.ReqRes, error) {
+func (_m *Client) DeliverTxAsync(_a0 context.Context, _a1 types.RequestDeliverTx) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestDeliverTx) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestDeliverTx) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -250,15 +250,15 @@ func (_m *Client) DeliverTxSync(_a0 context.Context, _a1 types.RequestDeliverTx)
 }
 
 // EchoAsync provides a mock function with given fields: ctx, msg
-func (_m *Client) EchoAsync(ctx context.Context, msg string) (*abciclient.ReqRes, error) {
+func (_m *Client) EchoAsync(ctx context.Context, msg string) (*abcicli.ReqRes, error) {
 	ret := _m.Called(ctx, msg)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, string) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, string) *abcicli.ReqRes); ok {
 		r0 = rf(ctx, msg)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -296,15 +296,15 @@ func (_m *Client) EchoSync(ctx context.Context, msg string) (*types.ResponseEcho
 }
 
 // EndBlockAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) EndBlockAsync(_a0 context.Context, _a1 types.RequestEndBlock) (*abciclient.ReqRes, error) {
+func (_m *Client) EndBlockAsync(_a0 context.Context, _a1 types.RequestEndBlock) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestEndBlock) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestEndBlock) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -356,15 +356,15 @@ func (_m *Client) Error() error {
 }
 
 // FlushAsync provides a mock function with given fields: _a0
-func (_m *Client) FlushAsync(_a0 context.Context) (*abciclient.ReqRes, error) {
+func (_m *Client) FlushAsync(_a0 context.Context) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context) *abcicli.ReqRes); ok {
 		r0 = rf(_a0)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -393,15 +393,15 @@ func (_m *Client) FlushSync(_a0 context.Context) error {
 }
 
 // InfoAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) InfoAsync(_a0 context.Context, _a1 types.RequestInfo) (*abciclient.ReqRes, error) {
+func (_m *Client) InfoAsync(_a0 context.Context, _a1 types.RequestInfo) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInfo) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInfo) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -439,15 +439,15 @@ func (_m *Client) InfoSync(_a0 context.Context, _a1 types.RequestInfo) (*types.R
 }
 
 // InitChainAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) InitChainAsync(_a0 context.Context, _a1 types.RequestInitChain) (*abciclient.ReqRes, error) {
+func (_m *Client) InitChainAsync(_a0 context.Context, _a1 types.RequestInitChain) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInitChain) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInitChain) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -499,15 +499,15 @@ func (_m *Client) IsRunning() bool {
 }
 
 // ListSnapshotsAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) ListSnapshotsAsync(_a0 context.Context, _a1 types.RequestListSnapshots) (*abciclient.ReqRes, error) {
+func (_m *Client) ListSnapshotsAsync(_a0 context.Context, _a1 types.RequestListSnapshots) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestListSnapshots) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestListSnapshots) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -545,15 +545,15 @@ func (_m *Client) ListSnapshotsSync(_a0 context.Context, _a1 types.RequestListSn
 }
 
 // LoadSnapshotChunkAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) LoadSnapshotChunkAsync(_a0 context.Context, _a1 types.RequestLoadSnapshotChunk) (*abciclient.ReqRes, error) {
+func (_m *Client) LoadSnapshotChunkAsync(_a0 context.Context, _a1 types.RequestLoadSnapshotChunk) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestLoadSnapshotChunk) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestLoadSnapshotChunk) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -591,15 +591,15 @@ func (_m *Client) LoadSnapshotChunkSync(_a0 context.Context, _a1 types.RequestLo
 }
 
 // OfferSnapshotAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) OfferSnapshotAsync(_a0 context.Context, _a1 types.RequestOfferSnapshot) (*abciclient.ReqRes, error) {
+func (_m *Client) OfferSnapshotAsync(_a0 context.Context, _a1 types.RequestOfferSnapshot) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestOfferSnapshot) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestOfferSnapshot) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -670,15 +670,15 @@ func (_m *Client) OnStop() {
 }
 
 // QueryAsync provides a mock function with given fields: _a0, _a1
-func (_m *Client) QueryAsync(_a0 context.Context, _a1 types.RequestQuery) (*abciclient.ReqRes, error) {
+func (_m *Client) QueryAsync(_a0 context.Context, _a1 types.RequestQuery) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0, _a1)
 
-	var r0 *abciclient.ReqRes
-	if rf, ok := ret.Get(0).(func(context.Context, types.RequestQuery) *abciclient.ReqRes); ok {
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestQuery) *abcicli.ReqRes); ok {
 		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abciclient.ReqRes)
+			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
@@ -751,7 +751,7 @@ func (_m *Client) SetLogger(_a0 log.Logger) {
 }
 
 // SetResponseCallback provides a mock function with given fields: _a0
-func (_m *Client) SetResponseCallback(_a0 abciclient.Callback) {
+func (_m *Client) SetResponseCallback(_a0 abcicli.Callback) {
 	_m.Called(_a0)
 }
 
@@ -796,23 +796,3 @@ func (_m *Client) String() string {
 
 	return r0
 }
-
-// Wait provides a mock function with given fields:
-func (_m *Client) Wait() {
-	_m.Called()
-}
-
-type mockConstructorTestingTNewClient interface {
-	mock.TestingT
-	Cleanup(func())
-}
-
-// NewClient creates a new instance of Client. It also registers a testing interface on the mock and a cleanup function to assert the mocks expectations.
-func NewClient(t mockConstructorTestingTNewClient) *Client {
-	mock := &Client{}
-	mock.Mock.Test(t)
-
-	t.Cleanup(func() { mock.AssertExpectations(t) })
-
-	return mock
-}

abci/client/socket_client.go

@@ -1,4 +1,4 @@
-package abciclient
+package abcicli
 
 import (
 	"bufio"
@@ -12,15 +12,18 @@ import (
 	"time"
 
 	"github.com/tendermint/tendermint/abci/types"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
 	tmnet "github.com/tendermint/tendermint/libs/net"
 	"github.com/tendermint/tendermint/libs/service"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
+	"github.com/tendermint/tendermint/libs/timer"
 )
 
 const (
 	// reqQueueSize is the max number of queued async requests.
 	// (memory: 256MB max assuming 1MB transactions)
 	reqQueueSize = 256
+	// Don't wait longer than...
+	flushThrottleMS = 20
 )
 
 type reqResWithContext struct {
@@ -37,7 +40,8 @@ type socketClient struct {
 	mustConnect bool
 	conn        net.Conn
 
-	reqQueue chan *reqResWithContext
+	reqQueue   chan *reqResWithContext
+	flushTimer *timer.ThrottleTimer
 
 	mtx     tmsync.Mutex
 	err     error
@@ -53,6 +57,7 @@ var _ Client = (*socketClient)(nil)
 func NewSocketClient(addr string, mustConnect bool) Client {
 	cli := &socketClient{
 		reqQueue:    make(chan *reqResWithContext, reqQueueSize),
+		flushTimer:  timer.NewThrottleTimer("socketClient", flushThrottleMS),
 		mustConnect: mustConnect,
 
 		addr:    addr,
@@ -97,7 +102,8 @@ func (cli *socketClient) OnStop() {
 		cli.conn.Close()
 	}
 
-	cli.drainQueue()
+	cli.flushQueue()
+	cli.flushTimer.Stop()
 }
 
 // Error returns an error if the client was stopped abruptly.
@@ -120,25 +126,38 @@ func (cli *socketClient) SetResponseCallback(resCb Callback) {
 //----------------------------------------
 
 func (cli *socketClient) sendRequestsRoutine(conn io.Writer) {
-	bw := bufio.NewWriter(conn)
+	w := bufio.NewWriter(conn)
 	for {
 		select {
 		case reqres := <-cli.reqQueue:
+			// cli.Logger.Debug("Sent request", "requestType", reflect.TypeOf(reqres.Request), "request", reqres.Request)
+
 			if reqres.C.Err() != nil {
 				cli.Logger.Debug("Request's context is done", "req", reqres.R, "err", reqres.C.Err())
 				continue
 			}
-			cli.willSendReq(reqres.R)
 
-			if err := types.WriteMessage(reqres.R.Request, bw); err != nil {
+			cli.willSendReq(reqres.R)
+			err := types.WriteMessage(reqres.R.Request, w)
+			if err != nil {
 				cli.stopForError(fmt.Errorf("write to buffer: %w", err))
 				return
 			}
-			if err := bw.Flush(); err != nil {
-				cli.stopForError(fmt.Errorf("flush buffer: %w", err))
-				return
-			}
 
+			// If it's a flush request, flush the current buffer.
+			if _, ok := reqres.R.Request.Value.(*types.Request_Flush); ok {
+				err = w.Flush()
+				if err != nil {
+					cli.stopForError(fmt.Errorf("flush buffer: %w", err))
+					return
+				}
+			}
+		case <-cli.flushTimer.Ch: // flush queue
+			select {
+			case cli.reqQueue <- &reqResWithContext{R: NewReqRes(types.ToRequestFlush()), C: context.Background()}:
+			default:
+				// Probably will fill the buffer, or retry later.
+			}
 		case <-cli.Quit():
 			return
 		}
@@ -207,7 +226,9 @@ func (cli *socketClient) didRecvResponse(res *types.Response) error {
 	//
 	// NOTE: It is possible this callback isn't set on the reqres object. At this
 	// point, in which case it will be called after, when it is set.
-	reqres.InvokeCallback()
+	if cb := reqres.GetCallback(); cb != nil {
+		cb(res)
+	}
 
 	return nil
 }
@@ -279,7 +300,7 @@ func (cli *socketClient) ApplySnapshotChunkAsync(
 //----------------------------------------
 
 func (cli *socketClient) FlushSync(ctx context.Context) error {
-	reqRes, err := cli.queueRequest(ctx, types.ToRequestFlush())
+	reqRes, err := cli.queueRequest(ctx, types.ToRequestFlush(), true)
 	if err != nil {
 		return queueErr(err)
 	}
@@ -448,22 +469,37 @@ func (cli *socketClient) ApplySnapshotChunkSync(
 
 //----------------------------------------
 
-// queueRequest enqueues req onto the queue. The request can break early if the
-// the context is canceled. If the queue is full, this method blocks to allow
-// the request to be placed onto the queue. This has the effect of creating an
-// unbounded queue of goroutines waiting to write to this queue which is a bit
-// antithetical to the purposes of a queue, however, undoing this behavior has
-// dangerous upstream implications as a result of the usage of this behavior upstream.
-// Remove at your peril.
+// queueRequest enqueues req onto the queue. If the queue is full, it ether
+// returns an error (sync=false) or blocks (sync=true).
+//
+// When sync=true, ctx can be used to break early. When sync=false, ctx will be
+// used later to determine if request should be dropped (if ctx.Err is
+// non-nil).
 //
 // The caller is responsible for checking cli.Error.
-func (cli *socketClient) queueRequest(ctx context.Context, req *types.Request) (*ReqRes, error) {
+func (cli *socketClient) queueRequest(ctx context.Context, req *types.Request, sync bool) (*ReqRes, error) {
 	reqres := NewReqRes(req)
 
-	select {
-	case cli.reqQueue <- &reqResWithContext{R: reqres, C: ctx}:
-	case <-ctx.Done():
-		return nil, ctx.Err()
+	if sync {
+		select {
+		case cli.reqQueue <- &reqResWithContext{R: reqres, C: context.Background()}:
+		case <-ctx.Done():
+			return nil, ctx.Err()
+		}
+	} else {
+		select {
+		case cli.reqQueue <- &reqResWithContext{R: reqres, C: ctx}:
+		default:
+			return nil, errors.New("buffer is full")
+		}
+	}
+
+	// Maybe auto-flush, or unset auto-flush
+	switch req.Value.(type) {
+	case *types.Request_Flush:
+		cli.flushTimer.Unset()
+	default:
+		cli.flushTimer.Set()
 	}
 
 	return reqres, nil
@@ -474,7 +510,7 @@ func (cli *socketClient) queueRequestAsync(
 	req *types.Request,
 ) (*ReqRes, error) {
 
-	reqres, err := cli.queueRequest(ctx, req)
+	reqres, err := cli.queueRequest(ctx, req, false)
 	if err != nil {
 		return nil, queueErr(err)
 	}
@@ -487,7 +523,7 @@ func (cli *socketClient) queueRequestAndFlushSync(
 	req *types.Request,
 ) (*ReqRes, error) {
 
-	reqres, err := cli.queueRequest(ctx, req)
+	reqres, err := cli.queueRequest(ctx, req, true)
 	if err != nil {
 		return nil, queueErr(err)
 	}
@@ -503,9 +539,7 @@ func queueErr(e error) error {
 	return fmt.Errorf("can't queue req: %w", e)
 }
 
-// drainQueue marks as complete and discards all remaining pending requests
-// from the queue.
-func (cli *socketClient) drainQueue() {
+func (cli *socketClient) flushQueue() {
 	cli.mtx.Lock()
 	defer cli.mtx.Unlock()
 
@@ -515,17 +549,14 @@ func (cli *socketClient) drainQueue() {
 		reqres.Done()
 	}
 
-	// Mark all queued messages as resolved.
-	//
-	// TODO(creachadair): We can't simply range the channel, because it is never
-	// closed, and the writer continues to add work.
-	// See https://github.com/tendermint/tendermint/issues/6996.
+	// mark all queued messages as resolved
+LOOP:
 	for {
 		select {
 		case reqres := <-cli.reqQueue:
 			reqres.R.Done()
 		default:
-			return
+			break LOOP
 		}
 	}
 }

abci/client/socket_client_test.go

@@ -1,20 +1,18 @@
-package abciclient_test
+package abcicli_test
 
 import (
 	"context"
 	"fmt"
-	"sync"
 	"testing"
 	"time"
 
-	"math/rand"
-
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 
-	abciclient "github.com/tendermint/tendermint/abci/client"
+	abcicli "github.com/tendermint/tendermint/abci/client"
 	"github.com/tendermint/tendermint/abci/server"
 	"github.com/tendermint/tendermint/abci/types"
+	tmrand "github.com/tendermint/tendermint/libs/rand"
 	"github.com/tendermint/tendermint/libs/service"
 )
 
@@ -101,9 +99,9 @@ func TestHangingSyncCalls(t *testing.T) {
 }
 
 func setupClientServer(t *testing.T, app types.Application) (
-	service.Service, abciclient.Client) {
+	service.Service, abcicli.Client) {
 	// some port between 20k and 30k
-	port := 20000 + rand.Int31()%10000
+	port := 20000 + tmrand.Int32()%10000
 	addr := fmt.Sprintf("localhost:%d", port)
 
 	s, err := server.NewServer(addr, "socket", app)
@@ -111,7 +109,7 @@ func setupClientServer(t *testing.T, app types.Application) (
 	err = s.Start()
 	require.NoError(t, err)
 
-	c := abciclient.NewSocketClient(addr, true)
+	c := abcicli.NewSocketClient(addr, true)
 	err = c.Start()
 	require.NoError(t, err)
 
@@ -126,73 +124,3 @@ func (slowApp) BeginBlock(req types.RequestBeginBlock) types.ResponseBeginBlock
 	time.Sleep(200 * time.Millisecond)
 	return types.ResponseBeginBlock{}
 }
-
-// TestCallbackInvokedWhenSetLaet ensures that the callback is invoked when
-// set after the client completes the call into the app. Currently this
-// test relies on the callback being allowed to be invoked twice if set multiple
-// times, once when set early and once when set late.
-func TestCallbackInvokedWhenSetLate(t *testing.T) {
-	wg := &sync.WaitGroup{}
-	wg.Add(1)
-	app := blockedABCIApplication{
-		wg: wg,
-	}
-	_, c := setupClientServer(t, app)
-	reqRes, err := c.CheckTxAsync(context.Background(), types.RequestCheckTx{})
-	require.NoError(t, err)
-
-	done := make(chan struct{})
-	cb := func(_ *types.Response) {
-		close(done)
-	}
-	reqRes.SetCallback(cb)
-	app.wg.Done()
-	<-done
-
-	var called bool
-	cb = func(_ *types.Response) {
-		called = true
-	}
-	reqRes.SetCallback(cb)
-	require.True(t, called)
-}
-
-type blockedABCIApplication struct {
-	wg *sync.WaitGroup
-	types.BaseApplication
-}
-
-func (b blockedABCIApplication) CheckTx(r types.RequestCheckTx) types.ResponseCheckTx {
-	b.wg.Wait()
-	return b.BaseApplication.CheckTx(r)
-}
-
-// TestCallbackInvokedWhenSetEarly ensures that the callback is invoked when
-// set before the client completes the call into the app.
-func TestCallbackInvokedWhenSetEarly(t *testing.T) {
-	wg := &sync.WaitGroup{}
-	wg.Add(1)
-	app := blockedABCIApplication{
-		wg: wg,
-	}
-	_, c := setupClientServer(t, app)
-	reqRes, err := c.CheckTxAsync(context.Background(), types.RequestCheckTx{})
-	require.NoError(t, err)
-
-	done := make(chan struct{})
-	cb := func(_ *types.Response) {
-		close(done)
-	}
-	reqRes.SetCallback(cb)
-	app.wg.Done()
-
-	called := func() bool {
-		select {
-		case <-done:
-			return true
-		default:
-			return false
-		}
-	}
-	require.Eventually(t, called, time.Second, time.Millisecond*25)
-}

abci/cmd/abci-cli/abci-cli.go

@@ -15,8 +15,9 @@ import (
 	"github.com/tendermint/tendermint/libs/log"
 	tmos "github.com/tendermint/tendermint/libs/os"
 
-	abciclient "github.com/tendermint/tendermint/abci/client"
+	abcicli "github.com/tendermint/tendermint/abci/client"
 	"github.com/tendermint/tendermint/abci/example/code"
+	"github.com/tendermint/tendermint/abci/example/counter"
 	"github.com/tendermint/tendermint/abci/example/kvstore"
 	"github.com/tendermint/tendermint/abci/server"
 	servertest "github.com/tendermint/tendermint/abci/tests/server"
@@ -27,7 +28,7 @@ import (
 
 // client is a global variable so it can be reused by the console
 var (
-	client abciclient.Client
+	client abcicli.Client
 	logger log.Logger
 
 	ctx = context.Background()
@@ -46,6 +47,9 @@ var (
 	flagHeight int
 	flagProve  bool
 
+	// counter
+	flagSerial bool
+
 	// kvstore
 	flagPersist string
 )
@@ -57,17 +61,22 @@ var RootCmd = &cobra.Command{
 	PersistentPreRunE: func(cmd *cobra.Command, args []string) error {
 
 		switch cmd.Use {
-		case "kvstore", "version":
+		case "counter", "kvstore": // for the examples apps, don't pre-run
+			return nil
+		case "version": // skip running for version command
 			return nil
 		}
 
 		if logger == nil {
-			logger = log.MustNewDefaultLogger(log.LogFormatPlain, log.LogLevelInfo, false)
+			allowLevel, err := log.AllowLevel(flagLogLevel)
+			if err != nil {
+				return err
+			}
+			logger = log.NewFilter(log.NewTMLogger(log.NewSyncWriter(os.Stdout)), allowLevel)
 		}
-
 		if client == nil {
 			var err error
-			client, err = abciclient.NewClient(flagAddress, flagAbci, false)
+			client, err = abcicli.NewClient(flagAddress, flagAbci, false)
 			if err != nil {
 				return err
 			}
@@ -129,6 +138,10 @@ func addQueryFlags() {
 		"whether or not to return a merkle proof of the query result")
 }
 
+func addCounterFlags() {
+	counterCmd.PersistentFlags().BoolVarP(&flagSerial, "serial", "", false, "enforce incrementing (serial) transactions")
+}
+
 func addKVStoreFlags() {
 	kvstoreCmd.PersistentFlags().StringVarP(&flagPersist, "persist", "", "", "directory to use for a database")
 }
@@ -147,6 +160,8 @@ func addCommands() {
 	RootCmd.AddCommand(queryCmd)
 
 	// examples
+	addCounterFlags()
+	RootCmd.AddCommand(counterCmd)
 	addKVStoreFlags()
 	RootCmd.AddCommand(kvstoreCmd)
 }
@@ -246,6 +261,14 @@ var queryCmd = &cobra.Command{
 	RunE:  cmdQuery,
 }
 
+var counterCmd = &cobra.Command{
+	Use:   "counter",
+	Short: "ABCI demo example",
+	Long:  "ABCI demo example",
+	Args:  cobra.ExactArgs(0),
+	RunE:  cmdCounter,
+}
+
 var kvstoreCmd = &cobra.Command{
 	Use:   "kvstore",
 	Short: "ABCI demo example",
@@ -573,8 +596,34 @@ func cmdQuery(cmd *cobra.Command, args []string) error {
 	return nil
 }
 
+func cmdCounter(cmd *cobra.Command, args []string) error {
+	app := counter.NewApplication(flagSerial)
+	logger := log.NewTMLogger(log.NewSyncWriter(os.Stdout))
+
+	// Start the listener
+	srv, err := server.NewServer(flagAddress, flagAbci, app)
+	if err != nil {
+		return err
+	}
+	srv.SetLogger(logger.With("module", "abci-server"))
+	if err := srv.Start(); err != nil {
+		return err
+	}
+
+	// Stop upon receiving SIGTERM or CTRL-C.
+	tmos.TrapSignal(logger, func() {
+		// Cleanup
+		if err := srv.Stop(); err != nil {
+			logger.Error("Error while stopping server", "err", err)
+		}
+	})
+
+	// Run forever.
+	select {}
+}
+
 func cmdKVStore(cmd *cobra.Command, args []string) error {
-	logger := log.MustNewDefaultLogger(log.LogFormatPlain, log.LogLevelInfo, false)
+	logger := log.NewTMLogger(log.NewSyncWriter(os.Stdout))
 
 	// Create the application - in memory or persisted to disk
 	var app types.Application

abci/example/counter/counter.go

@@ -0,0 +1,86 @@
+package counter
+
+import (
+	"encoding/binary"
+	"fmt"
+
+	"github.com/tendermint/tendermint/abci/example/code"
+	"github.com/tendermint/tendermint/abci/types"
+)
+
+type Application struct {
+	types.BaseApplication
+
+	hashCount int
+	txCount   int
+	serial    bool
+}
+
+func NewApplication(serial bool) *Application {
+	return &Application{serial: serial}
+}
+
+func (app *Application) Info(req types.RequestInfo) types.ResponseInfo {
+	return types.ResponseInfo{Data: fmt.Sprintf("{\"hashes\":%v,\"txs\":%v}", app.hashCount, app.txCount)}
+}
+
+func (app *Application) DeliverTx(req types.RequestDeliverTx) types.ResponseDeliverTx {
+	if app.serial {
+		if len(req.Tx) > 8 {
+			return types.ResponseDeliverTx{
+				Code: code.CodeTypeEncodingError,
+				Log:  fmt.Sprintf("Max tx size is 8 bytes, got %d", len(req.Tx))}
+		}
+		tx8 := make([]byte, 8)
+		copy(tx8[len(tx8)-len(req.Tx):], req.Tx)
+		txValue := binary.BigEndian.Uint64(tx8)
+		if txValue != uint64(app.txCount) {
+			return types.ResponseDeliverTx{
+				Code: code.CodeTypeBadNonce,
+				Log:  fmt.Sprintf("Invalid nonce. Expected %v, got %v", app.txCount, txValue)}
+		}
+	}
+	app.txCount++
+	return types.ResponseDeliverTx{Code: code.CodeTypeOK}
+}
+
+func (app *Application) CheckTx(req types.RequestCheckTx) types.ResponseCheckTx {
+	if app.serial {
+		if len(req.Tx) > 8 {
+			return types.ResponseCheckTx{
+				Code: code.CodeTypeEncodingError,
+				Log:  fmt.Sprintf("Max tx size is 8 bytes, got %d", len(req.Tx))}
+		}
+
+		tx8 := make([]byte, 8)
+		copy(tx8[len(tx8)-len(req.Tx):], req.Tx)
+		txValue := binary.BigEndian.Uint64(tx8)
+		if txValue < uint64(app.txCount) {
+			return types.ResponseCheckTx{
+				Code: code.CodeTypeBadNonce,
+				Log:  fmt.Sprintf("Invalid nonce. Expected >= %v, got %v", app.txCount, txValue)}
+		}
+	}
+	return types.ResponseCheckTx{Code: code.CodeTypeOK}
+}
+
+func (app *Application) Commit() (resp types.ResponseCommit) {
+	app.hashCount++
+	if app.txCount == 0 {
+		return types.ResponseCommit{}
+	}
+	hash := make([]byte, 8)
+	binary.BigEndian.PutUint64(hash, uint64(app.txCount))
+	return types.ResponseCommit{Data: hash}
+}
+
+func (app *Application) Query(reqQuery types.RequestQuery) types.ResponseQuery {
+	switch reqQuery.Path {
+	case "hash":
+		return types.ResponseQuery{Value: []byte(fmt.Sprintf("%v", app.hashCount))}
+	case "tx":
+		return types.ResponseQuery{Value: []byte(fmt.Sprintf("%v", app.txCount))}
+	default:
+		return types.ResponseQuery{Log: fmt.Sprintf("Invalid query path. Expected hash or tx, got %v", reqQuery.Path)}
+	}
+}

abci/example/example_test.go

@@ -13,12 +13,11 @@ import (
 	"github.com/stretchr/testify/require"
 
 	"google.golang.org/grpc"
-	"google.golang.org/grpc/credentials/insecure"
 
 	"github.com/tendermint/tendermint/libs/log"
 	tmnet "github.com/tendermint/tendermint/libs/net"
 
-	abciclient "github.com/tendermint/tendermint/abci/client"
+	abcicli "github.com/tendermint/tendermint/abci/client"
 	"github.com/tendermint/tendermint/abci/example/code"
 	"github.com/tendermint/tendermint/abci/example/kvstore"
 	abciserver "github.com/tendermint/tendermint/abci/server"
@@ -62,7 +61,7 @@ func testStream(t *testing.T, app types.Application) {
 	})
 
 	// Connect to the socket
-	client := abciclient.NewSocketClient(socket, false)
+	client := abcicli.NewSocketClient(socket, false)
 	client.SetLogger(log.TestingLogger().With("module", "abci-client"))
 	err = client.Start()
 	require.NoError(t, err)
@@ -130,7 +129,7 @@ func dialerFunc(ctx context.Context, addr string) (net.Conn, error) {
 
 func testGRPCSync(t *testing.T, app types.ABCIApplicationServer) {
 	numDeliverTxs := 2000
-	socketFile := fmt.Sprintf("/tmp/test-%08x.sock", rand.Int31n(1<<30))
+	socketFile := fmt.Sprintf("test-%08x.sock", rand.Int31n(1<<30))
 	defer os.Remove(socketFile)
 	socket := fmt.Sprintf("unix://%v", socketFile)
 
@@ -148,10 +147,7 @@ func testGRPCSync(t *testing.T, app types.ABCIApplicationServer) {
 	})
 
 	// Connect to the socket
-	conn, err := grpc.Dial(socket,
-		grpc.WithTransportCredentials(insecure.NewCredentials()),
-		grpc.WithContextDialer(dialerFunc),
-	)
+	conn, err := grpc.Dial(socket, grpc.WithInsecure(), grpc.WithContextDialer(dialerFunc))
 	if err != nil {
 		t.Fatalf("Error dialing GRPC server: %v", err.Error())
 	}

abci/example/kvstore/helpers.go

@@ -1,8 +1,6 @@
 package kvstore
 
 import (
-	mrand "math/rand"
-
 	"github.com/tendermint/tendermint/abci/types"
 	tmrand "github.com/tendermint/tendermint/libs/rand"
 )
@@ -11,8 +9,7 @@ import (
 // from the input value
 func RandVal(i int) types.ValidatorUpdate {
 	pubkey := tmrand.Bytes(32)
-	// Random value between [0, 2^16 - 1]
-	power := mrand.Uint32() & (1<<16 - 1) // nolint:gosec // G404: Use of weak random number generator
+	power := tmrand.Uint16() + 1
 	v := types.UpdateValidator(pubkey, int64(power), "")
 	return v
 }

abci/example/kvstore/kvstore.go

@@ -87,16 +87,15 @@ func (app *Application) Info(req types.RequestInfo) (resInfo types.ResponseInfo)
 
 // tx is either "key=value" or just arbitrary bytes
 func (app *Application) DeliverTx(req types.RequestDeliverTx) types.ResponseDeliverTx {
-	var key, value string
-
+	var key, value []byte
 	parts := bytes.Split(req.Tx, []byte("="))
 	if len(parts) == 2 {
-		key, value = string(parts[0]), string(parts[1])
+		key, value = parts[0], parts[1]
 	} else {
-		key, value = string(req.Tx), string(req.Tx)
+		key, value = req.Tx, req.Tx
 	}
 
-	err := app.state.db.Set(prefixKey([]byte(key)), []byte(value))
+	err := app.state.db.Set(prefixKey(key), value)
 	if err != nil {
 		panic(err)
 	}
@@ -106,10 +105,10 @@ func (app *Application) DeliverTx(req types.RequestDeliverTx) types.ResponseDeli
 		{
 			Type: "app",
 			Attributes: []types.EventAttribute{
-				{Key: "creator", Value: "Cosmoshi Netowoko", Index: true},
-				{Key: "key", Value: key, Index: true},
-				{Key: "index_key", Value: "index is working", Index: true},
-				{Key: "noindex_key", Value: "index is working", Index: false},
+				{Key: []byte("creator"), Value: []byte("Cosmoshi Netowoko"), Index: true},
+				{Key: []byte("key"), Value: key, Index: true},
+				{Key: []byte("index_key"), Value: []byte("index is working"), Index: true},
+				{Key: []byte("noindex_key"), Value: []byte("index is working"), Index: false},
 			},
 		},
 	}

abci/example/kvstore/kvstore_test.go

@@ -12,7 +12,7 @@ import (
 	"github.com/tendermint/tendermint/libs/log"
 	"github.com/tendermint/tendermint/libs/service"
 
-	abciclient "github.com/tendermint/tendermint/abci/client"
+	abcicli "github.com/tendermint/tendermint/abci/client"
 	"github.com/tendermint/tendermint/abci/example/code"
 	abciserver "github.com/tendermint/tendermint/abci/server"
 	"github.com/tendermint/tendermint/abci/types"
@@ -165,7 +165,7 @@ func TestValUpdates(t *testing.T) {
 
 	makeApplyBlock(t, kvstore, 2, diff, tx1, tx2, tx3)
 
-	vals1 = append(vals[:nInit-2], vals[nInit+1])
+	vals1 = append(vals[:nInit-2], vals[nInit+1]) // nolint: gocritic
 	vals2 = kvstore.Validators()
 	valsEqual(t, vals1, vals2)
 
@@ -229,7 +229,7 @@ func valsEqual(t *testing.T, vals1, vals2 []types.ValidatorUpdate) {
 	}
 }
 
-func makeSocketClientServer(app types.Application, name string) (abciclient.Client, service.Service, error) {
+func makeSocketClientServer(app types.Application, name string) (abcicli.Client, service.Service, error) {
 	// Start the listener
 	socket := fmt.Sprintf("unix://%s.sock", name)
 	logger := log.TestingLogger()
@@ -241,7 +241,7 @@ func makeSocketClientServer(app types.Application, name string) (abciclient.Clie
 	}
 
 	// Connect to the socket
-	client := abciclient.NewSocketClient(socket, false)
+	client := abcicli.NewSocketClient(socket, false)
 	client.SetLogger(logger.With("module", "abci-client"))
 	if err := client.Start(); err != nil {
 		if err = server.Stop(); err != nil {
@@ -253,7 +253,7 @@ func makeSocketClientServer(app types.Application, name string) (abciclient.Clie
 	return client, server, nil
 }
 
-func makeGRPCClientServer(app types.Application, name string) (abciclient.Client, service.Service, error) {
+func makeGRPCClientServer(app types.Application, name string) (abcicli.Client, service.Service, error) {
 	// Start the listener
 	socket := fmt.Sprintf("unix://%s.sock", name)
 	logger := log.TestingLogger()
@@ -265,7 +265,7 @@ func makeGRPCClientServer(app types.Application, name string) (abciclient.Client
 		return nil, nil, err
 	}
 
-	client := abciclient.NewGRPCClient(socket, true)
+	client := abcicli.NewGRPCClient(socket, true)
 	client.SetLogger(logger.With("module", "abci-client"))
 	if err := client.Start(); err != nil {
 		if err := server.Stop(); err != nil {
@@ -296,7 +296,7 @@ func TestClientServer(t *testing.T) {
 
 	// set up grpc app
 	kvstore = NewApplication()
-	gclient, gserver, err := makeGRPCClientServer(kvstore, "/tmp/kvstore-grpc")
+	gclient, gserver, err := makeGRPCClientServer(kvstore, "kvstore-grpc")
 	require.NoError(t, err)
 
 	t.Cleanup(func() {
@@ -313,7 +313,7 @@ func TestClientServer(t *testing.T) {
 	runClientTests(t, gclient)
 }
 
-func runClientTests(t *testing.T, client abciclient.Client) {
+func runClientTests(t *testing.T, client abcicli.Client) {
 	// run some tests....
 	key := testKey
 	value := key
@@ -325,7 +325,7 @@ func runClientTests(t *testing.T, client abciclient.Client) {
 	testClient(t, client, tx, key, value)
 }
 
-func testClient(t *testing.T, app abciclient.Client, tx []byte, key, value string) {
+func testClient(t *testing.T, app abcicli.Client, tx []byte, key, value string) {
 	ar, err := app.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: tx})
 	require.NoError(t, err)
 	require.False(t, ar.IsErr(), ar)

abci/example/kvstore/persistent_kvstore.go

@@ -11,9 +11,9 @@ import (
 
 	"github.com/tendermint/tendermint/abci/example/code"
 	"github.com/tendermint/tendermint/abci/types"
-	"github.com/tendermint/tendermint/crypto/encoding"
+	cryptoenc "github.com/tendermint/tendermint/crypto/encoding"
 	"github.com/tendermint/tendermint/libs/log"
-	cryptoproto "github.com/tendermint/tendermint/proto/tendermint/crypto"
+	pc "github.com/tendermint/tendermint/proto/tendermint/crypto"
 )
 
 const (
@@ -30,7 +30,7 @@ type PersistentKVStoreApplication struct {
 	// validator set
 	ValUpdates []types.ValidatorUpdate
 
-	valAddrToPubKeyMap map[string]cryptoproto.PublicKey
+	valAddrToPubKeyMap map[string]pc.PublicKey
 
 	logger log.Logger
 }
@@ -46,15 +46,11 @@ func NewPersistentKVStoreApplication(dbDir string) *PersistentKVStoreApplication
 
 	return &PersistentKVStoreApplication{
 		app:                &Application{state: state},
-		valAddrToPubKeyMap: make(map[string]cryptoproto.PublicKey),
+		valAddrToPubKeyMap: make(map[string]pc.PublicKey),
 		logger:             log.NewNopLogger(),
 	}
 }
 
-func (app *PersistentKVStoreApplication) Close() error {
-	return app.app.state.db.Close()
-}
-
 func (app *PersistentKVStoreApplication) SetLogger(l log.Logger) {
 	app.logger = l
 }
@@ -194,8 +190,8 @@ func (app *PersistentKVStoreApplication) Validators() (validators []types.Valida
 	return
 }
 
-func MakeValSetChangeTx(pubkey cryptoproto.PublicKey, power int64) []byte {
-	pk, err := encoding.PubKeyFromProto(pubkey)
+func MakeValSetChangeTx(pubkey pc.PublicKey, power int64) []byte {
+	pk, err := cryptoenc.PubKeyFromProto(pubkey)
 	if err != nil {
 		panic(err)
 	}
@@ -243,7 +239,7 @@ func (app *PersistentKVStoreApplication) execValidatorTx(tx []byte) types.Respon
 
 // add, update, or remove a validator
 func (app *PersistentKVStoreApplication) updateValidator(v types.ValidatorUpdate) types.ResponseDeliverTx {
-	pubkey, err := encoding.PubKeyFromProto(v.PubKey)
+	pubkey, err := cryptoenc.PubKeyFromProto(v.PubKey)
 	if err != nil {
 		panic(fmt.Errorf("can't decode public key: %w", err))
 	}

abci/server/socket_server.go

@@ -9,10 +9,10 @@ import (
 	"runtime"
 
 	"github.com/tendermint/tendermint/abci/types"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
 	tmlog "github.com/tendermint/tendermint/libs/log"
 	tmnet "github.com/tendermint/tendermint/libs/net"
 	"github.com/tendermint/tendermint/libs/service"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
 )
 
 // var maxNumberConnections = 2
@@ -240,15 +240,22 @@ func (s *SocketServer) handleRequest(req *types.Request, responses chan<- *types
 
 // Pull responses from 'responses' and write them to conn.
 func (s *SocketServer) handleResponses(closeConn chan error, conn io.Writer, responses <-chan *types.Response) {
-	bw := bufio.NewWriter(conn)
-	for res := range responses {
-		if err := types.WriteMessage(res, bw); err != nil {
+	var count int
+	var bufWriter = bufio.NewWriter(conn)
+	for {
+		var res = <-responses
+		err := types.WriteMessage(res, bufWriter)
+		if err != nil {
 			closeConn <- fmt.Errorf("error writing message: %w", err)
 			return
 		}
-		if err := bw.Flush(); err != nil {
-			closeConn <- fmt.Errorf("error flushing write buffer: %w", err)
-			return
+		if _, ok := res.Value.(*types.Response_Flush); ok {
+			err = bufWriter.Flush()
+			if err != nil {
+				closeConn <- fmt.Errorf("error flushing write buffer: %w", err)
+				return
+			}
 		}
+		count++
 	}
 }

abci/tests/client_server_test.go

@@ -5,7 +5,7 @@ import (
 
 	"github.com/stretchr/testify/assert"
 
-	abciclientent "github.com/tendermint/tendermint/abci/client"
+	abciclient "github.com/tendermint/tendermint/abci/client"
 	"github.com/tendermint/tendermint/abci/example/kvstore"
 	abciserver "github.com/tendermint/tendermint/abci/server"
 )
@@ -20,7 +20,7 @@ func TestClientServerNoAddrPrefix(t *testing.T) {
 	err = server.Start()
 	assert.NoError(t, err, "expected no error on server.Start")
 
-	client, err := abciclientent.NewClient(addr, transport, true)
+	client, err := abciclient.NewClient(addr, transport, true)
 	assert.NoError(t, err, "expected no error on NewClient")
 	err = client.Start()
 	assert.NoError(t, err, "expected no error on client.Start")

abci/tests/server/client.go

@@ -5,22 +5,20 @@ import (
 	"context"
 	"errors"
 	"fmt"
-	mrand "math/rand"
 
-	abciclient "github.com/tendermint/tendermint/abci/client"
+	abcicli "github.com/tendermint/tendermint/abci/client"
 	"github.com/tendermint/tendermint/abci/types"
 	tmrand "github.com/tendermint/tendermint/libs/rand"
 )
 
 var ctx = context.Background()
 
-func InitChain(client abciclient.Client) error {
+func InitChain(client abcicli.Client) error {
 	total := 10
 	vals := make([]types.ValidatorUpdate, total)
 	for i := 0; i < total; i++ {
 		pubkey := tmrand.Bytes(33)
-		// nolint:gosec // G404: Use of weak random number generator
-		power := mrand.Int()
+		power := tmrand.Int()
 		vals[i] = types.UpdateValidator(pubkey, int64(power), "")
 	}
 	_, err := client.InitChainSync(ctx, types.RequestInitChain{
@@ -34,7 +32,7 @@ func InitChain(client abciclient.Client) error {
 	return nil
 }
 
-func Commit(client abciclient.Client, hashExp []byte) error {
+func Commit(client abcicli.Client, hashExp []byte) error {
 	res, err := client.CommitSync(ctx)
 	data := res.Data
 	if err != nil {
@@ -51,7 +49,7 @@ func Commit(client abciclient.Client, hashExp []byte) error {
 	return nil
 }
 
-func DeliverTx(client abciclient.Client, txBytes []byte, codeExp uint32, dataExp []byte) error {
+func DeliverTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []byte) error {
 	res, _ := client.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: txBytes})
 	code, data, log := res.Code, res.Data, res.Log
 	if code != codeExp {
@@ -70,7 +68,7 @@ func DeliverTx(client abciclient.Client, txBytes []byte, codeExp uint32, dataExp
 	return nil
 }
 
-func CheckTx(client abciclient.Client, txBytes []byte, codeExp uint32, dataExp []byte) error {
+func CheckTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []byte) error {
 	res, _ := client.CheckTxSync(ctx, types.RequestCheckTx{Tx: txBytes})
 	code, data, log := res.Code, res.Data, res.Log
 	if code != codeExp {

abci/tests/test_app/app.go

@@ -0,0 +1,56 @@
+package main
+
+import (
+	"bytes"
+	"context"
+	"fmt"
+	"os"
+
+	abcicli "github.com/tendermint/tendermint/abci/client"
+	"github.com/tendermint/tendermint/abci/types"
+	"github.com/tendermint/tendermint/libs/log"
+)
+
+var ctx = context.Background()
+
+func startClient(abciType string) abcicli.Client {
+	// Start client
+	client, err := abcicli.NewClient("tcp://127.0.0.1:26658", abciType, true)
+	if err != nil {
+		panic(err.Error())
+	}
+	logger := log.NewTMLogger(log.NewSyncWriter(os.Stdout))
+	client.SetLogger(logger.With("module", "abcicli"))
+	if err := client.Start(); err != nil {
+		panicf("connecting to abci_app: %v", err.Error())
+	}
+
+	return client
+}
+
+func commit(client abcicli.Client, hashExp []byte) {
+	res, err := client.CommitSync(ctx)
+	if err != nil {
+		panicf("client error: %v", err)
+	}
+	if !bytes.Equal(res.Data, hashExp) {
+		panicf("Commit hash was unexpected. Got %X expected %X", res.Data, hashExp)
+	}
+}
+
+func deliverTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []byte) {
+	res, err := client.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: txBytes})
+	if err != nil {
+		panicf("client error: %v", err)
+	}
+	if res.Code != codeExp {
+		panicf("DeliverTx response code was unexpected. Got %v expected %v. Log: %v", res.Code, codeExp, res.Log)
+	}
+	if !bytes.Equal(res.Data, dataExp) {
+		panicf("DeliverTx response data was unexpected. Got %X expected %X", res.Data, dataExp)
+	}
+}
+
+func panicf(format string, a ...interface{}) {
+	panic(fmt.Sprintf(format, a...))
+}

abci/tests/test_app/main.go

@@ -0,0 +1,93 @@
+package main
+
+import (
+	"fmt"
+	"log"
+	"os"
+	"os/exec"
+	"time"
+
+	"github.com/tendermint/tendermint/abci/types"
+)
+
+var abciType string
+
+func init() {
+	abciType = os.Getenv("ABCI")
+	if abciType == "" {
+		abciType = "socket"
+	}
+}
+
+func main() {
+	testCounter()
+}
+
+const (
+	maxABCIConnectTries = 10
+)
+
+func ensureABCIIsUp(typ string, n int) error {
+	var err error
+	cmdString := "abci-cli echo hello"
+	if typ == "grpc" {
+		cmdString = "abci-cli --abci grpc echo hello"
+	}
+
+	for i := 0; i < n; i++ {
+		cmd := exec.Command("bash", "-c", cmdString)
+		_, err = cmd.CombinedOutput()
+		if err == nil {
+			break
+		}
+		time.Sleep(500 * time.Millisecond)
+	}
+	return err
+}
+
+func testCounter() {
+	abciApp := os.Getenv("ABCI_APP")
+	if abciApp == "" {
+		panic("No ABCI_APP specified")
+	}
+
+	fmt.Printf("Running %s test with abci=%s\n", abciApp, abciType)
+	subCommand := fmt.Sprintf("abci-cli %s", abciApp)
+	cmd := exec.Command("bash", "-c", subCommand)
+	cmd.Stdout = os.Stdout
+	if err := cmd.Start(); err != nil {
+		log.Fatalf("starting %q err: %v", abciApp, err)
+	}
+	defer func() {
+		if err := cmd.Process.Kill(); err != nil {
+			log.Printf("error on process kill: %v", err)
+		}
+		if err := cmd.Wait(); err != nil {
+			log.Printf("error while waiting for cmd to exit: %v", err)
+		}
+	}()
+
+	if err := ensureABCIIsUp(abciType, maxABCIConnectTries); err != nil {
+		log.Fatalf("echo failed: %v", err) //nolint:gocritic
+	}
+
+	client := startClient(abciType)
+	defer func() {
+		if err := client.Stop(); err != nil {
+			log.Printf("error trying client stop: %v", err)
+		}
+	}()
+
+	// commit(client, nil)
+	// deliverTx(client, []byte("abc"), code.CodeTypeBadNonce, nil)
+	commit(client, nil)
+	deliverTx(client, []byte{0x00}, types.CodeTypeOK, nil)
+	commit(client, []byte{0, 0, 0, 0, 0, 0, 0, 1})
+	// deliverTx(client, []byte{0x00}, code.CodeTypeBadNonce, nil)
+	deliverTx(client, []byte{0x01}, types.CodeTypeOK, nil)
+	deliverTx(client, []byte{0x00, 0x02}, types.CodeTypeOK, nil)
+	deliverTx(client, []byte{0x00, 0x03}, types.CodeTypeOK, nil)
+	deliverTx(client, []byte{0x00, 0x00, 0x04}, types.CodeTypeOK, nil)
+	// deliverTx(client, []byte{0x00, 0x00, 0x06}, code.CodeTypeBadNonce, nil)
+	commit(client, []byte{0, 0, 0, 0, 0, 0, 0, 5})
+}

abci/tests/test_app/test.sh

@@ -0,0 +1,28 @@
+#! /bin/bash
+set -e
+
+# These tests spawn the counter app and server by execing the ABCI_APP command and run some simple client tests against it
+
+# Get the directory of where this script is.
+export PATH="$GOBIN:$PATH"
+SOURCE="${BASH_SOURCE[0]}"
+while [ -h "$SOURCE" ] ; do SOURCE="$(readlink "$SOURCE")"; done
+DIR="$( cd -P "$( dirname "$SOURCE" )" && pwd )"
+
+# Change into that dir because we expect that.
+cd "$DIR"
+
+echo "RUN COUNTER OVER SOCKET"
+# test golang counter
+ABCI_APP="counter" go run -mod=readonly ./*.go
+echo "----------------------"
+
+
+echo "RUN COUNTER OVER GRPC"
+# test golang counter via grpc
+ABCI_APP="counter --abci=grpc" ABCI="grpc" go run -mod=readonly ./*.go
+echo "----------------------"
+
+# test nodejs counter
+# TODO: fix node app
+#ABCI_APP="node $GOPATH/src/github.com/tendermint/js-abci/example/app.js" go test -test.run TestCounter

abci/tests/test_cli/test.sh

@@ -37,6 +37,7 @@ function testExample() {
 }
 
 testExample 1 tests/test_cli/ex1.abci abci-cli kvstore
+testExample 2 tests/test_cli/ex2.abci abci-cli counter
 
 echo ""
 echo "PASS"

abci/types/client.go

@@ -1 +0,0 @@
-package types

abci/types/messages.go

@@ -4,7 +4,7 @@ import (
 	"io"
 
 	"github.com/gogo/protobuf/proto"
-	"github.com/tendermint/tendermint/internal/libs/protoio"
+	"github.com/tendermint/tendermint/libs/protoio"
 )
 
 const (
@@ -15,7 +15,11 @@ const (
 func WriteMessage(msg proto.Message, w io.Writer) error {
 	protoWriter := protoio.NewDelimitedWriter(w)
 	_, err := protoWriter.WriteMsg(msg)
-	return err
+	if err != nil {
+		return err
+	}
+
+	return nil
 }
 
 // ReadMessage reads a varint length-delimited protobuf message.

abci/types/messages_test.go

@@ -25,7 +25,7 @@ func TestMarshalJSON(t *testing.T) {
 			{
 				Type: "testEvent",
 				Attributes: []EventAttribute{
-					{Key: "pho", Value: "bo"},
+					{Key: []byte("pho"), Value: []byte("bo")},
 				},
 			},
 		},
@@ -92,7 +92,7 @@ func TestWriteReadMessage2(t *testing.T) {
 				{
 					Type: "testEvent",
 					Attributes: []EventAttribute{
-						{Key: "abc", Value: "def"},
+						{Key: []byte("abc"), Value: []byte("def")},
 					},
 				},
 			},

abci/types/pubkey.go

@@ -4,20 +4,20 @@ import (
 	fmt "fmt"
 
 	"github.com/tendermint/tendermint/crypto/ed25519"
-	"github.com/tendermint/tendermint/crypto/encoding"
+	cryptoenc "github.com/tendermint/tendermint/crypto/encoding"
 	"github.com/tendermint/tendermint/crypto/secp256k1"
-	"github.com/tendermint/tendermint/crypto/sr25519"
 )
 
 func Ed25519ValidatorUpdate(pk []byte, power int64) ValidatorUpdate {
 	pke := ed25519.PubKey(pk)
 
-	pkp, err := encoding.PubKeyToProto(pke)
+	pkp, err := cryptoenc.PubKeyToProto(pke)
 	if err != nil {
 		panic(err)
 	}
 
 	return ValidatorUpdate{
+		// Address:
 		PubKey: pkp,
 		Power:  power,
 	}
@@ -29,21 +29,12 @@ func UpdateValidator(pk []byte, power int64, keyType string) ValidatorUpdate {
 		return Ed25519ValidatorUpdate(pk, power)
 	case secp256k1.KeyType:
 		pke := secp256k1.PubKey(pk)
-		pkp, err := encoding.PubKeyToProto(pke)
-		if err != nil {
-			panic(err)
-		}
-		return ValidatorUpdate{
-			PubKey: pkp,
-			Power:  power,
-		}
-	case sr25519.KeyType:
-		pke := sr25519.PubKey(pk)
-		pkp, err := encoding.PubKeyToProto(pke)
+		pkp, err := cryptoenc.PubKeyToProto(pke)
 		if err != nil {
 			panic(err)
 		}
 		return ValidatorUpdate{
+			// Address:
 			PubKey: pkp,
 			Power:  power,
 		}

abci/types/result.go

@@ -5,9 +5,6 @@ import (
 	"encoding/json"
 
 	"github.com/gogo/protobuf/jsonpb"
-	"github.com/tendermint/tendermint/crypto"
-	"github.com/tendermint/tendermint/crypto/encoding"
-	tmjson "github.com/tendermint/tendermint/libs/json"
 )
 
 const (
@@ -45,7 +42,7 @@ func (r ResponseQuery) IsErr() bool {
 }
 
 //---------------------------------------------------------------------------
-// override JSON marshaling so we emit defaults (ie. disable omitempty)
+// override JSON marshalling so we emit defaults (ie. disable omitempty)
 
 var (
 	jsonpbMarshaller = jsonpb.Marshaler{
@@ -105,48 +102,6 @@ func (r *EventAttribute) UnmarshalJSON(b []byte) error {
 	return jsonpbUnmarshaller.Unmarshal(reader, r)
 }
 
-// validatorUpdateJSON is the JSON encoding of a validator update.
-//
-// It handles translation of public keys from the protobuf representation to
-// the legacy Amino-compatible format expected by RPC clients.
-type validatorUpdateJSON struct {
-	PubKey json.RawMessage `json:"pub_key,omitempty"`
-	Power  int64           `json:"power,string"`
-}
-
-func (v *ValidatorUpdate) MarshalJSON() ([]byte, error) {
-	key, err := encoding.PubKeyFromProto(v.PubKey)
-	if err != nil {
-		return nil, err
-	}
-	jkey, err := tmjson.Marshal(key)
-	if err != nil {
-		return nil, err
-	}
-	return json.Marshal(validatorUpdateJSON{
-		PubKey: jkey,
-		Power:  v.GetPower(),
-	})
-}
-
-func (v *ValidatorUpdate) UnmarshalJSON(data []byte) error {
-	var vu validatorUpdateJSON
-	if err := json.Unmarshal(data, &vu); err != nil {
-		return err
-	}
-	var key crypto.PubKey
-	if err := tmjson.Unmarshal(vu.PubKey, &key); err != nil {
-		return err
-	}
-	pkey, err := encoding.PubKeyToProto(key)
-	if err != nil {
-		return err
-	}
-	v.PubKey = pkey
-	v.Power = vu.Power
-	return nil
-}
-
 // Some compile time assertions to ensure we don't
 // have accidental runtime surprises later on.
 

behaviour/doc.go

@@ -1,10 +1,10 @@
 /*
-Package Behavior provides a mechanism for reactors to report behavior of peers.
+Package Behaviour provides a mechanism for reactors to report behaviour of peers.
 
-Instead of a reactor calling the switch directly it will call the behavior module which will
+Instead of a reactor calling the switch directly it will call the behaviour module which will
 handle the stoping and marking peer as good on behalf of the reactor.
 
-There are four different behaviors a reactor can report.
+There are four different behaviours a reactor can report.
 
 1. bad message
 
@@ -39,4 +39,4 @@ type blockPart struct {
 This message will request the peer be marked as good
 
 */
-package behavior
+package behaviour

behaviour/peer_behaviour.go

@@ -0,0 +1,49 @@
+package behaviour
+
+import (
+	"github.com/tendermint/tendermint/p2p"
+)
+
+// PeerBehaviour is a struct describing a behaviour a peer performed.
+// `peerID` identifies the peer and reason characterizes the specific
+// behaviour performed by the peer.
+type PeerBehaviour struct {
+	peerID p2p.NodeID
+	reason interface{}
+}
+
+type badMessage struct {
+	explanation string
+}
+
+// BadMessage returns a badMessage PeerBehaviour.
+func BadMessage(peerID p2p.NodeID, explanation string) PeerBehaviour {
+	return PeerBehaviour{peerID: peerID, reason: badMessage{explanation}}
+}
+
+type messageOutOfOrder struct {
+	explanation string
+}
+
+// MessageOutOfOrder returns a messagOutOfOrder PeerBehaviour.
+func MessageOutOfOrder(peerID p2p.NodeID, explanation string) PeerBehaviour {
+	return PeerBehaviour{peerID: peerID, reason: messageOutOfOrder{explanation}}
+}
+
+type consensusVote struct {
+	explanation string
+}
+
+// ConsensusVote returns a consensusVote PeerBehaviour.
+func ConsensusVote(peerID p2p.NodeID, explanation string) PeerBehaviour {
+	return PeerBehaviour{peerID: peerID, reason: consensusVote{explanation}}
+}
+
+type blockPart struct {
+	explanation string
+}
+
+// BlockPart returns blockPart PeerBehaviour.
+func BlockPart(peerID p2p.NodeID, explanation string) PeerBehaviour {
+	return PeerBehaviour{peerID: peerID, reason: blockPart{explanation}}
+}

behaviour/reporter.go

@@ -1,20 +1,19 @@
-package behavior
+package behaviour
 
 import (
 	"errors"
 
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
-	"github.com/tendermint/tendermint/internal/p2p"
-	"github.com/tendermint/tendermint/types"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
+	"github.com/tendermint/tendermint/p2p"
 )
 
-// Reporter provides an interface for reactors to report the behavior
+// Reporter provides an interface for reactors to report the behaviour
 // of peers synchronously to other components.
 type Reporter interface {
-	Report(behavior PeerBehavior) error
+	Report(behaviour PeerBehaviour) error
 }
 
-// SwitchReporter reports peer behavior to an internal Switch.
+// SwitchReporter reports peer behaviour to an internal Switch.
 type SwitchReporter struct {
 	sw *p2p.Switch
 }
@@ -26,14 +25,14 @@ func NewSwitchReporter(sw *p2p.Switch) *SwitchReporter {
 	}
 }
 
-// Report reports the behavior of a peer to the Switch.
-func (spbr *SwitchReporter) Report(behavior PeerBehavior) error {
-	peer := spbr.sw.Peers().Get(behavior.peerID)
+// Report reports the behaviour of a peer to the Switch.
+func (spbr *SwitchReporter) Report(behaviour PeerBehaviour) error {
+	peer := spbr.sw.Peers().Get(behaviour.peerID)
 	if peer == nil {
 		return errors.New("peer not found")
 	}
 
-	switch reason := behavior.reason.(type) {
+	switch reason := behaviour.reason.(type) {
 	case consensusVote, blockPart:
 		spbr.sw.MarkPeerAsGood(peer)
 	case badMessage:
@@ -49,39 +48,39 @@ func (spbr *SwitchReporter) Report(behavior PeerBehavior) error {
 
 // MockReporter is a concrete implementation of the Reporter
 // interface used in reactor tests to ensure reactors report the correct
-// behavior in manufactured scenarios.
+// behaviour in manufactured scenarios.
 type MockReporter struct {
 	mtx tmsync.RWMutex
-	pb  map[types.NodeID][]PeerBehavior
+	pb  map[p2p.NodeID][]PeerBehaviour
 }
 
 // NewMockReporter returns a Reporter which records all reported
-// behaviors in memory.
+// behaviours in memory.
 func NewMockReporter() *MockReporter {
 	return &MockReporter{
-		pb: map[types.NodeID][]PeerBehavior{},
+		pb: map[p2p.NodeID][]PeerBehaviour{},
 	}
 }
 
-// Report stores the PeerBehavior produced by the peer identified by peerID.
-func (mpbr *MockReporter) Report(behavior PeerBehavior) error {
+// Report stores the PeerBehaviour produced by the peer identified by peerID.
+func (mpbr *MockReporter) Report(behaviour PeerBehaviour) error {
 	mpbr.mtx.Lock()
 	defer mpbr.mtx.Unlock()
-	mpbr.pb[behavior.peerID] = append(mpbr.pb[behavior.peerID], behavior)
+	mpbr.pb[behaviour.peerID] = append(mpbr.pb[behaviour.peerID], behaviour)
 
 	return nil
 }
 
-// GetBehaviors returns all behaviors reported on the peer identified by peerID.
-func (mpbr *MockReporter) GetBehaviors(peerID types.NodeID) []PeerBehavior {
+// GetBehaviours returns all behaviours reported on the peer identified by peerID.
+func (mpbr *MockReporter) GetBehaviours(peerID p2p.NodeID) []PeerBehaviour {
 	mpbr.mtx.RLock()
 	defer mpbr.mtx.RUnlock()
 	if items, ok := mpbr.pb[peerID]; ok {
-		result := make([]PeerBehavior, len(items))
+		result := make([]PeerBehaviour, len(items))
 		copy(result, items)
 
 		return result
 	}
 
-	return []PeerBehavior{}
+	return []PeerBehaviour{}
 }

behaviour/reporter_test.go

@@ -0,0 +1,205 @@
+package behaviour_test
+
+import (
+	"sync"
+	"testing"
+
+	bh "github.com/tendermint/tendermint/behaviour"
+	"github.com/tendermint/tendermint/p2p"
+)
+
+// TestMockReporter tests the MockReporter's ability to store reported
+// peer behaviour in memory indexed by the peerID.
+func TestMockReporter(t *testing.T) {
+	var peerID p2p.NodeID = "MockPeer"
+	pr := bh.NewMockReporter()
+
+	behaviours := pr.GetBehaviours(peerID)
+	if len(behaviours) != 0 {
+		t.Error("Expected to have no behaviours reported")
+	}
+
+	badMessage := bh.BadMessage(peerID, "bad message")
+	if err := pr.Report(badMessage); err != nil {
+		t.Error(err)
+	}
+	behaviours = pr.GetBehaviours(peerID)
+	if len(behaviours) != 1 {
+		t.Error("Expected the peer have one reported behaviour")
+	}
+
+	if behaviours[0] != badMessage {
+		t.Error("Expected Bad Message to have been reported")
+	}
+}
+
+type scriptItem struct {
+	peerID    p2p.NodeID
+	behaviour bh.PeerBehaviour
+}
+
+// equalBehaviours returns true if a and b contain the same PeerBehaviours with
+// the same freequencies and otherwise false.
+func equalBehaviours(a []bh.PeerBehaviour, b []bh.PeerBehaviour) bool {
+	aHistogram := map[bh.PeerBehaviour]int{}
+	bHistogram := map[bh.PeerBehaviour]int{}
+
+	for _, behaviour := range a {
+		aHistogram[behaviour]++
+	}
+
+	for _, behaviour := range b {
+		bHistogram[behaviour]++
+	}
+
+	if len(aHistogram) != len(bHistogram) {
+		return false
+	}
+
+	for _, behaviour := range a {
+		if aHistogram[behaviour] != bHistogram[behaviour] {
+			return false
+		}
+	}
+
+	for _, behaviour := range b {
+		if bHistogram[behaviour] != aHistogram[behaviour] {
+			return false
+		}
+	}
+
+	return true
+}
+
+// TestEqualPeerBehaviours tests that equalBehaviours can tell that two slices
+// of peer behaviours can be compared for the behaviours they contain and the
+// freequencies that those behaviours occur.
+func TestEqualPeerBehaviours(t *testing.T) {
+	var (
+		peerID        p2p.NodeID = "MockPeer"
+		consensusVote            = bh.ConsensusVote(peerID, "voted")
+		blockPart                = bh.BlockPart(peerID, "blocked")
+		equals                   = []struct {
+			left  []bh.PeerBehaviour
+			right []bh.PeerBehaviour
+		}{
+			// Empty sets
+			{[]bh.PeerBehaviour{}, []bh.PeerBehaviour{}},
+			// Single behaviours
+			{[]bh.PeerBehaviour{consensusVote}, []bh.PeerBehaviour{consensusVote}},
+			// Equal Frequencies
+			{[]bh.PeerBehaviour{consensusVote, consensusVote},
+				[]bh.PeerBehaviour{consensusVote, consensusVote}},
+			// Equal frequencies different orders
+			{[]bh.PeerBehaviour{consensusVote, blockPart},
+				[]bh.PeerBehaviour{blockPart, consensusVote}},
+		}
+		unequals = []struct {
+			left  []bh.PeerBehaviour
+			right []bh.PeerBehaviour
+		}{
+			// Comparing empty sets to non empty sets
+			{[]bh.PeerBehaviour{}, []bh.PeerBehaviour{consensusVote}},
+			// Different behaviours
+			{[]bh.PeerBehaviour{consensusVote}, []bh.PeerBehaviour{blockPart}},
+			// Same behaviour with different frequencies
+			{[]bh.PeerBehaviour{consensusVote},
+				[]bh.PeerBehaviour{consensusVote, consensusVote}},
+		}
+	)
+
+	for _, test := range equals {
+		if !equalBehaviours(test.left, test.right) {
+			t.Errorf("expected %#v and %#v to be equal", test.left, test.right)
+		}
+	}
+
+	for _, test := range unequals {
+		if equalBehaviours(test.left, test.right) {
+			t.Errorf("expected %#v and %#v to be unequal", test.left, test.right)
+		}
+	}
+}
+
+// TestPeerBehaviourConcurrency constructs a scenario in which
+// multiple goroutines are using the same MockReporter instance.
+// This test reproduces the conditions in which MockReporter will
+// be used within a Reactor `Receive` method tests to ensure thread safety.
+func TestMockPeerBehaviourReporterConcurrency(t *testing.T) {
+	var (
+		behaviourScript = []struct {
+			peerID     p2p.NodeID
+			behaviours []bh.PeerBehaviour
+		}{
+			{"1", []bh.PeerBehaviour{bh.ConsensusVote("1", "")}},
+			{"2", []bh.PeerBehaviour{bh.ConsensusVote("2", ""), bh.ConsensusVote("2", ""), bh.ConsensusVote("2", "")}},
+			{
+				"3",
+				[]bh.PeerBehaviour{bh.BlockPart("3", ""),
+					bh.ConsensusVote("3", ""),
+					bh.BlockPart("3", ""),
+					bh.ConsensusVote("3", "")}},
+			{
+				"4",
+				[]bh.PeerBehaviour{bh.ConsensusVote("4", ""),
+					bh.ConsensusVote("4", ""),
+					bh.ConsensusVote("4", ""),
+					bh.ConsensusVote("4", "")}},
+			{
+				"5",
+				[]bh.PeerBehaviour{bh.BlockPart("5", ""),
+					bh.ConsensusVote("5", ""),
+					bh.BlockPart("5", ""),
+					bh.ConsensusVote("5", "")}},
+		}
+	)
+
+	var receiveWg sync.WaitGroup
+	pr := bh.NewMockReporter()
+	scriptItems := make(chan scriptItem)
+	done := make(chan int)
+	numConsumers := 3
+	for i := 0; i < numConsumers; i++ {
+		receiveWg.Add(1)
+		go func() {
+			defer receiveWg.Done()
+			for {
+				select {
+				case pb := <-scriptItems:
+					if err := pr.Report(pb.behaviour); err != nil {
+						t.Error(err)
+					}
+				case <-done:
+					return
+				}
+			}
+		}()
+	}
+
+	var sendingWg sync.WaitGroup
+	sendingWg.Add(1)
+	go func() {
+		defer sendingWg.Done()
+		for _, item := range behaviourScript {
+			for _, reason := range item.behaviours {
+				scriptItems <- scriptItem{item.peerID, reason}
+			}
+		}
+	}()
+
+	sendingWg.Wait()
+
+	for i := 0; i < numConsumers; i++ {
+		done <- 1
+	}
+
+	receiveWg.Wait()
+
+	for _, items := range behaviourScript {
+		reported := pr.GetBehaviours(items.peerID)
+		if !equalBehaviours(reported, items.behaviours) {
+			t.Errorf("expected peer %s to have behaved \nExpected: %#v \nGot %#v \n",
+				items.peerID, items.behaviours, reported)
+		}
+	}
+}

blockchain/doc.go

@@ -0,0 +1,17 @@
+/*
+Package blockchain provides two implementations of the fast-sync protocol.
+
+- v0 was the very first implementation. it's battle tested, but does not have a
+lot of test coverage.
+- v2 is the newest implementation, with a focus on testability and readability.
+
+Check out ADR-40 for the formal model and requirements.
+
+# Termination criteria
+
+1. the maximum peer height is reached
+2. termination timeout is triggered, which is set if the peer set is empty or
+there are no pending requests.
+
+*/
+package blockchain

blockchain/msgs.go

@@ -1,7 +1,7 @@
-package blocksync
+package blockchain
 
 import (
-	bcproto "github.com/tendermint/tendermint/proto/tendermint/blocksync"
+	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
 	"github.com/tendermint/tendermint/types"
 )
 

blockchain/v0/pool.go

@@ -7,10 +7,11 @@ import (
 	"sync/atomic"
 	"time"
 
-	flow "github.com/tendermint/tendermint/internal/libs/flowrate"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
+	flow "github.com/tendermint/tendermint/libs/flowrate"
 	"github.com/tendermint/tendermint/libs/log"
 	"github.com/tendermint/tendermint/libs/service"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
+	"github.com/tendermint/tendermint/p2p"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -62,10 +63,10 @@ var peerTimeout = 15 * time.Second // not const so we can override with tests
 // PeerID responsible for delivering the block.
 type BlockRequest struct {
 	Height int64
-	PeerID types.NodeID
+	PeerID p2p.NodeID
 }
 
-// BlockPool keeps track of the block sync peers, block requests and block responses.
+// BlockPool keeps track of the fast sync peers, block requests and block responses.
 type BlockPool struct {
 	service.BaseService
 	lastAdvance time.Time
@@ -75,7 +76,7 @@ type BlockPool struct {
 	requesters map[int64]*bpRequester
 	height     int64 // the lowest key in requesters.
 	// peers
-	peers         map[types.NodeID]*bpPeer
+	peers         map[p2p.NodeID]*bpPeer
 	maxPeerHeight int64 // the biggest reported height
 
 	// atomic
@@ -83,26 +84,20 @@ type BlockPool struct {
 
 	requestsCh chan<- BlockRequest
 	errorsCh   chan<- peerError
-
-	startHeight               int64
-	lastHundredBlockTimeStamp time.Time
-	lastSyncRate              float64
 }
 
 // NewBlockPool returns a new BlockPool with the height equal to start. Block
 // requests and errors will be sent to requestsCh and errorsCh accordingly.
 func NewBlockPool(start int64, requestsCh chan<- BlockRequest, errorsCh chan<- peerError) *BlockPool {
 	bp := &BlockPool{
-		peers: make(map[types.NodeID]*bpPeer),
+		peers: make(map[p2p.NodeID]*bpPeer),
 
-		requesters:  make(map[int64]*bpRequester),
-		height:      start,
-		startHeight: start,
-		numPending:  0,
+		requesters: make(map[int64]*bpRequester),
+		height:     start,
+		numPending: 0,
 
-		requestsCh:   requestsCh,
-		errorsCh:     errorsCh,
-		lastSyncRate: 0,
+		requestsCh: requestsCh,
+		errorsCh:   errorsCh,
 	}
 	bp.BaseService = *service.NewBaseService(nil, "BlockPool", bp)
 	return bp
@@ -112,7 +107,6 @@ func NewBlockPool(start int64, requestsCh chan<- BlockRequest, errorsCh chan<- p
 // pool's start time.
 func (pool *BlockPool) OnStart() error {
 	pool.lastAdvance = time.Now()
-	pool.lastHundredBlockTimeStamp = pool.lastAdvance
 	go pool.makeRequestersRoutine()
 	return nil
 }
@@ -223,19 +217,6 @@ func (pool *BlockPool) PopRequest() {
 		delete(pool.requesters, pool.height)
 		pool.height++
 		pool.lastAdvance = time.Now()
-
-		// the lastSyncRate will be updated every 100 blocks, it uses the adaptive filter
-		// to smooth the block sync rate and the unit represents the number of blocks per second.
-		if (pool.height-pool.startHeight)%100 == 0 {
-			newSyncRate := 100 / time.Since(pool.lastHundredBlockTimeStamp).Seconds()
-			if pool.lastSyncRate == 0 {
-				pool.lastSyncRate = newSyncRate
-			} else {
-				pool.lastSyncRate = 0.9*pool.lastSyncRate + 0.1*newSyncRate
-			}
-			pool.lastHundredBlockTimeStamp = time.Now()
-		}
-
 	} else {
 		panic(fmt.Sprintf("Expected requester to pop, got nothing at height %v", pool.height))
 	}
@@ -244,13 +225,13 @@ func (pool *BlockPool) PopRequest() {
 // RedoRequest invalidates the block at pool.height,
 // Remove the peer and redo request from others.
 // Returns the ID of the removed peer.
-func (pool *BlockPool) RedoRequest(height int64) types.NodeID {
+func (pool *BlockPool) RedoRequest(height int64) p2p.NodeID {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
 	request := pool.requesters[height]
 	peerID := request.getPeerID()
-	if peerID != types.NodeID("") {
+	if peerID != p2p.NodeID("") {
 		// RemovePeer will redo all requesters associated with this peer.
 		pool.removePeer(peerID)
 	}
@@ -259,7 +240,7 @@ func (pool *BlockPool) RedoRequest(height int64) types.NodeID {
 
 // AddBlock validates that the block comes from the peer it was expected from and calls the requester to store it.
 // TODO: ensure that blocks come in order for each peer.
-func (pool *BlockPool) AddBlock(peerID types.NodeID, block *types.Block, blockSize int) {
+func (pool *BlockPool) AddBlock(peerID p2p.NodeID, block *types.Block, blockSize int) {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
@@ -306,7 +287,7 @@ func (pool *BlockPool) LastAdvance() time.Time {
 }
 
 // SetPeerRange sets the peer's alleged blockchain base and height.
-func (pool *BlockPool) SetPeerRange(peerID types.NodeID, base int64, height int64) {
+func (pool *BlockPool) SetPeerRange(peerID p2p.NodeID, base int64, height int64) {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
@@ -327,14 +308,14 @@ func (pool *BlockPool) SetPeerRange(peerID types.NodeID, base int64, height int6
 
 // RemovePeer removes the peer with peerID from the pool. If there's no peer
 // with peerID, function is a no-op.
-func (pool *BlockPool) RemovePeer(peerID types.NodeID) {
+func (pool *BlockPool) RemovePeer(peerID p2p.NodeID) {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
 	pool.removePeer(peerID)
 }
 
-func (pool *BlockPool) removePeer(peerID types.NodeID) {
+func (pool *BlockPool) removePeer(peerID p2p.NodeID) {
 	for _, requester := range pool.requesters {
 		if requester.getPeerID() == peerID {
 			requester.redo(peerID)
@@ -415,14 +396,14 @@ func (pool *BlockPool) requestersLen() int64 {
 	return int64(len(pool.requesters))
 }
 
-func (pool *BlockPool) sendRequest(height int64, peerID types.NodeID) {
+func (pool *BlockPool) sendRequest(height int64, peerID p2p.NodeID) {
 	if !pool.IsRunning() {
 		return
 	}
 	pool.requestsCh <- BlockRequest{height, peerID}
 }
 
-func (pool *BlockPool) sendError(err error, peerID types.NodeID) {
+func (pool *BlockPool) sendError(err error, peerID p2p.NodeID) {
 	if !pool.IsRunning() {
 		return
 	}
@@ -448,20 +429,6 @@ func (pool *BlockPool) debug() string {
 	return str
 }
 
-func (pool *BlockPool) targetSyncBlocks() int64 {
-	pool.mtx.RLock()
-	defer pool.mtx.RUnlock()
-
-	return pool.maxPeerHeight - pool.startHeight + 1
-}
-
-func (pool *BlockPool) getLastSyncRate() float64 {
-	pool.mtx.RLock()
-	defer pool.mtx.RUnlock()
-
-	return pool.lastSyncRate
-}
-
 //-------------------------------------
 
 type bpPeer struct {
@@ -470,7 +437,7 @@ type bpPeer struct {
 	height      int64
 	base        int64
 	pool        *BlockPool
-	id          types.NodeID
+	id          p2p.NodeID
 	recvMonitor *flow.Monitor
 
 	timeout *time.Timer
@@ -478,7 +445,7 @@ type bpPeer struct {
 	logger log.Logger
 }
 
-func newBPPeer(pool *BlockPool, peerID types.NodeID, base int64, height int64) *bpPeer {
+func newBPPeer(pool *BlockPool, peerID p2p.NodeID, base int64, height int64) *bpPeer {
 	peer := &bpPeer{
 		pool:       pool,
 		id:         peerID,
@@ -543,10 +510,10 @@ type bpRequester struct {
 	pool       *BlockPool
 	height     int64
 	gotBlockCh chan struct{}
-	redoCh     chan types.NodeID // redo may send multitime, add peerId to identify repeat
+	redoCh     chan p2p.NodeID // redo may send multitime, add peerId to identify repeat
 
 	mtx    tmsync.Mutex
-	peerID types.NodeID
+	peerID p2p.NodeID
 	block  *types.Block
 }
 
@@ -555,7 +522,7 @@ func newBPRequester(pool *BlockPool, height int64) *bpRequester {
 		pool:       pool,
 		height:     height,
 		gotBlockCh: make(chan struct{}, 1),
-		redoCh:     make(chan types.NodeID, 1),
+		redoCh:     make(chan p2p.NodeID, 1),
 
 		peerID: "",
 		block:  nil,
@@ -570,7 +537,7 @@ func (bpr *bpRequester) OnStart() error {
 }
 
 // Returns true if the peer matches and block doesn't already exist.
-func (bpr *bpRequester) setBlock(block *types.Block, peerID types.NodeID) bool {
+func (bpr *bpRequester) setBlock(block *types.Block, peerID p2p.NodeID) bool {
 	bpr.mtx.Lock()
 	if bpr.block != nil || bpr.peerID != peerID {
 		bpr.mtx.Unlock()
@@ -592,7 +559,7 @@ func (bpr *bpRequester) getBlock() *types.Block {
 	return bpr.block
 }
 
-func (bpr *bpRequester) getPeerID() types.NodeID {
+func (bpr *bpRequester) getPeerID() p2p.NodeID {
 	bpr.mtx.Lock()
 	defer bpr.mtx.Unlock()
 	return bpr.peerID
@@ -614,7 +581,7 @@ func (bpr *bpRequester) reset() {
 // Tells bpRequester to pick another peer and try again.
 // NOTE: Nonblocking, and does nothing if another redo
 // was already requested.
-func (bpr *bpRequester) redo(peerID types.NodeID) {
+func (bpr *bpRequester) redo(peerID p2p.NodeID) {
 	select {
 	case bpr.redoCh <- peerID:
 	default:

blockchain/v0/pool_test.go

@@ -2,7 +2,6 @@ package v0
 
 import (
 	"fmt"
-	mrand "math/rand"
 	"testing"
 	"time"
 
@@ -11,6 +10,7 @@ import (
 
 	"github.com/tendermint/tendermint/libs/log"
 	tmrand "github.com/tendermint/tendermint/libs/rand"
+	"github.com/tendermint/tendermint/p2p"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -19,7 +19,7 @@ func init() {
 }
 
 type testPeer struct {
-	id        types.NodeID
+	id        p2p.NodeID
 	base      int64
 	height    int64
 	inputChan chan inputData // make sure each peer's data is sequential
@@ -49,7 +49,7 @@ func (p testPeer) simulateInput(input inputData) {
 	// input.t.Logf("Added block from peer %v (height: %v)", input.request.PeerID, input.request.Height)
 }
 
-type testPeers map[types.NodeID]testPeer
+type testPeers map[p2p.NodeID]testPeer
 
 func (ps testPeers) start() {
 	for _, v := range ps {
@@ -66,8 +66,8 @@ func (ps testPeers) stop() {
 func makePeers(numPeers int, minHeight, maxHeight int64) testPeers {
 	peers := make(testPeers, numPeers)
 	for i := 0; i < numPeers; i++ {
-		peerID := types.NodeID(tmrand.Str(12))
-		height := minHeight + mrand.Int63n(maxHeight-minHeight)
+		peerID := p2p.NodeID(tmrand.Str(12))
+		height := minHeight + tmrand.Int63n(maxHeight-minHeight)
 		base := minHeight + int64(i)
 		if base > height {
 			base = height
@@ -182,7 +182,7 @@ func TestBlockPoolTimeout(t *testing.T) {
 
 	// Pull from channels
 	counter := 0
-	timedOut := map[types.NodeID]struct{}{}
+	timedOut := map[p2p.NodeID]struct{}{}
 	for {
 		select {
 		case err := <-errorsCh:
@@ -203,7 +203,7 @@ func TestBlockPoolTimeout(t *testing.T) {
 func TestBlockPoolRemovePeer(t *testing.T) {
 	peers := make(testPeers, 10)
 	for i := 0; i < 10; i++ {
-		peerID := types.NodeID(fmt.Sprintf("%d", i+1))
+		peerID := p2p.NodeID(fmt.Sprintf("%d", i+1))
 		height := int64(i + 1)
 		peers[peerID] = testPeer{peerID, 0, height, make(chan inputData)}
 	}
@@ -227,10 +227,10 @@ func TestBlockPoolRemovePeer(t *testing.T) {
 	assert.EqualValues(t, 10, pool.MaxPeerHeight())
 
 	// remove not-existing peer
-	assert.NotPanics(t, func() { pool.RemovePeer(types.NodeID("Superman")) })
+	assert.NotPanics(t, func() { pool.RemovePeer(p2p.NodeID("Superman")) })
 
 	// remove peer with biggest height
-	pool.RemovePeer(types.NodeID("10"))
+	pool.RemovePeer(p2p.NodeID("10"))
 	assert.EqualValues(t, 9, pool.MaxPeerHeight())
 
 	// remove all peers

blockchain/v0/reactor.go

@@ -2,19 +2,16 @@ package v0
 
 import (
 	"fmt"
-	"runtime/debug"
 	"sync"
 	"time"
 
-	"github.com/tendermint/tendermint/internal/blocksync"
-	"github.com/tendermint/tendermint/internal/consensus"
-	"github.com/tendermint/tendermint/internal/p2p"
-	sm "github.com/tendermint/tendermint/internal/state"
-	"github.com/tendermint/tendermint/internal/store"
+	bc "github.com/tendermint/tendermint/blockchain"
 	"github.com/tendermint/tendermint/libs/log"
 	"github.com/tendermint/tendermint/libs/service"
-	tmsync "github.com/tendermint/tendermint/libs/sync"
-	bcproto "github.com/tendermint/tendermint/proto/tendermint/blocksync"
+	"github.com/tendermint/tendermint/p2p"
+	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
+	sm "github.com/tendermint/tendermint/state"
+	"github.com/tendermint/tendermint/store"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -29,23 +26,22 @@ var (
 	// TODO: Remove once p2p refactor is complete.
 	// ref: https://github.com/tendermint/tendermint/issues/5670
 	ChannelShims = map[p2p.ChannelID]*p2p.ChannelDescriptorShim{
-		BlockSyncChannel: {
+		BlockchainChannel: {
 			MsgType: new(bcproto.Message),
 			Descriptor: &p2p.ChannelDescriptor{
-				ID:                  byte(BlockSyncChannel),
+				ID:                  byte(BlockchainChannel),
 				Priority:            5,
 				SendQueueCapacity:   1000,
-				RecvBufferCapacity:  1024,
-				RecvMessageCapacity: blocksync.MaxMsgSize,
-				MaxSendBytes:        100,
+				RecvBufferCapacity:  50 * 4096,
+				RecvMessageCapacity: bc.MaxMsgSize,
 			},
 		},
 	}
 )
 
 const (
-	// BlockSyncChannel is a channel for blocks and status updates
-	BlockSyncChannel = p2p.ChannelID(0x40)
+	// BlockchainChannel is a channel for blocks and status updates
+	BlockchainChannel = p2p.ChannelID(0x40)
 
 	trySyncIntervalMS = 10
 
@@ -60,21 +56,21 @@ const (
 )
 
 type consensusReactor interface {
-	// For when we switch from block sync reactor to the consensus
+	// For when we switch from blockchain reactor and fast sync to the consensus
 	// machine.
 	SwitchToConsensus(state sm.State, skipWAL bool)
 }
 
 type peerError struct {
 	err    error
-	peerID types.NodeID
+	peerID p2p.NodeID
 }
 
 func (e peerError) Error() string {
 	return fmt.Sprintf("error with peer %v: %s", e.peerID, e.err.Error())
 }
 
-// Reactor handles long-term catchup syncing.
+// BlockchainReactor handles long-term catchup syncing.
 type Reactor struct {
 	service.BaseService
 
@@ -85,19 +81,11 @@ type Reactor struct {
 	store       *store.BlockStore
 	pool        *BlockPool
 	consReactor consensusReactor
-	blockSync   *tmsync.AtomicBool
+	fastSync    bool
 
-	blockSyncCh *p2p.Channel
-	// blockSyncOutBridgeCh defines a channel that acts as a bridge between sending Envelope
-	// messages that the reactor will consume in processBlockSyncCh and receiving messages
-	// from the peer updates channel and other goroutines. We do this instead of directly
-	// sending on blockSyncCh.Out to avoid race conditions in the case where other goroutines
-	// send Envelopes directly to the to blockSyncCh.Out channel, since processBlockSyncCh
-	// may close the blockSyncCh.Out channel at the same time that other goroutines send to
-	// blockSyncCh.Out.
-	blockSyncOutBridgeCh chan p2p.Envelope
-	peerUpdates          *p2p.PeerUpdates
-	closeCh              chan struct{}
+	blockchainCh *p2p.Channel
+	peerUpdates  *p2p.PeerUpdatesCh
+	closeCh      chan struct{}
 
 	requestsCh <-chan BlockRequest
 	errorsCh   <-chan peerError
@@ -106,10 +94,6 @@ type Reactor struct {
 	// requestRoutine spawned goroutines when stopping the reactor and before
 	// stopping the p2p Channel(s).
 	poolWG sync.WaitGroup
-
-	metrics *consensus.Metrics
-
-	syncStartTime time.Time
 }
 
 // NewReactor returns new reactor instance.
@@ -119,10 +103,9 @@ func NewReactor(
 	blockExec *sm.BlockExecutor,
 	store *store.BlockStore,
 	consReactor consensusReactor,
-	blockSyncCh *p2p.Channel,
-	peerUpdates *p2p.PeerUpdates,
-	blockSync bool,
-	metrics *consensus.Metrics,
+	blockchainCh *p2p.Channel,
+	peerUpdates *p2p.PeerUpdatesCh,
+	fastSync bool,
 ) (*Reactor, error) {
 	if state.LastBlockHeight != store.Height() {
 		return nil, fmt.Errorf("state (%v) and store (%v) height mismatch", state.LastBlockHeight, store.Height())
@@ -137,23 +120,20 @@ func NewReactor(
 	errorsCh := make(chan peerError, maxPeerErrBuffer) // NOTE: The capacity should be larger than the peer count.
 
 	r := &Reactor{
-		initialState:         state,
-		blockExec:            blockExec,
-		store:                store,
-		pool:                 NewBlockPool(startHeight, requestsCh, errorsCh),
-		consReactor:          consReactor,
-		blockSync:            tmsync.NewBool(blockSync),
-		requestsCh:           requestsCh,
-		errorsCh:             errorsCh,
-		blockSyncCh:          blockSyncCh,
-		blockSyncOutBridgeCh: make(chan p2p.Envelope),
-		peerUpdates:          peerUpdates,
-		closeCh:              make(chan struct{}),
-		metrics:              metrics,
-		syncStartTime:        time.Time{},
+		initialState: state,
+		blockExec:    blockExec,
+		store:        store,
+		pool:         NewBlockPool(startHeight, requestsCh, errorsCh),
+		consReactor:  consReactor,
+		fastSync:     fastSync,
+		requestsCh:   requestsCh,
+		errorsCh:     errorsCh,
+		blockchainCh: blockchainCh,
+		peerUpdates:  peerUpdates,
+		closeCh:      make(chan struct{}),
 	}
 
-	r.BaseService = *service.NewBaseService(logger, "BlockSync", r)
+	r.BaseService = *service.NewBaseService(logger, "Blockchain", r)
 	return r, nil
 }
 
@@ -162,21 +142,19 @@ func NewReactor(
 // messages on that p2p channel accordingly. The caller must be sure to execute
 // OnStop to ensure the outbound p2p Channels are closed.
 //
-// If blockSync is enabled, we also start the pool and the pool processing
+// If fastSync is enabled, we also start the pool and the pool processing
 // goroutine. If the pool fails to start, an error is returned.
 func (r *Reactor) OnStart() error {
-	if r.blockSync.IsSet() {
+	if r.fastSync {
 		if err := r.pool.Start(); err != nil {
 			return err
 		}
-		r.poolWG.Add(1)
-		go r.requestRoutine()
 
 		r.poolWG.Add(1)
 		go r.poolRoutine(false)
 	}
 
-	go r.processBlockSyncCh()
+	go r.processBlockchainCh()
 	go r.processPeerUpdates()
 
 	return nil
@@ -185,7 +163,7 @@ func (r *Reactor) OnStart() error {
 // OnStop stops the reactor by signaling to all spawned goroutines to exit and
 // blocking until they all exit.
 func (r *Reactor) OnStop() {
-	if r.blockSync.IsSet() {
+	if r.fastSync {
 		if err := r.pool.Stop(); err != nil {
 			r.Logger.Error("failed to stop pool", "err", err)
 		}
@@ -201,13 +179,13 @@ func (r *Reactor) OnStop() {
 	// Wait for all p2p Channels to be closed before returning. This ensures we
 	// can easily reason about synchronization of all p2p Channels and ensure no
 	// panics will occur.
-	<-r.blockSyncCh.Done()
+	<-r.blockchainCh.Done()
 	<-r.peerUpdates.Done()
 }
 
 // respondToPeer loads a block and sends it to the requesting peer, if we have it.
 // Otherwise, we'll respond saying we do not have it.
-func (r *Reactor) respondToPeer(msg *bcproto.BlockRequest, peerID types.NodeID) {
+func (r *Reactor) respondToPeer(msg *bcproto.BlockRequest, peerID p2p.NodeID) {
 	block := r.store.LoadBlock(msg.Height)
 	if block != nil {
 		blockProto, err := block.ToProto()
@@ -216,7 +194,7 @@ func (r *Reactor) respondToPeer(msg *bcproto.BlockRequest, peerID types.NodeID)
 			return
 		}
 
-		r.blockSyncCh.Out <- p2p.Envelope{
+		r.blockchainCh.Out() <- p2p.Envelope{
 			To:      peerID,
 			Message: &bcproto.BlockResponse{Block: blockProto},
 		}
@@ -225,16 +203,16 @@ func (r *Reactor) respondToPeer(msg *bcproto.BlockRequest, peerID types.NodeID)
 	}
 
 	r.Logger.Info("peer requesting a block we do not have", "peer", peerID, "height", msg.Height)
-	r.blockSyncCh.Out <- p2p.Envelope{
+	r.blockchainCh.Out() <- p2p.Envelope{
 		To:      peerID,
 		Message: &bcproto.NoBlockResponse{Height: msg.Height},
 	}
 }
 
-// handleBlockSyncMessage handles envelopes sent from peers on the
-// BlockSyncChannel. It returns an error only if the Envelope.Message is unknown
+// handleBlockchainMessage handles envelopes sent from peers on the
+// BlockchainChannel. It returns an error only if the Envelope.Message is unknown
 // for this channel. This should never be called outside of handleMessage.
-func (r *Reactor) handleBlockSyncMessage(envelope p2p.Envelope) error {
+func (r *Reactor) handleBlockchainMessage(envelope p2p.Envelope) error {
 	logger := r.Logger.With("peer", envelope.From)
 
 	switch msg := envelope.Message.(type) {
@@ -251,7 +229,7 @@ func (r *Reactor) handleBlockSyncMessage(envelope p2p.Envelope) error {
 		r.pool.AddBlock(envelope.From, block, block.Size())
 
 	case *bcproto.StatusRequest:
-		r.blockSyncCh.Out <- p2p.Envelope{
+		r.blockchainCh.Out() <- p2p.Envelope{
 			To: envelope.From,
 			Message: &bcproto.StatusResponse{
 				Height: r.store.Height(),
@@ -279,19 +257,15 @@ func (r *Reactor) handleMessage(chID p2p.ChannelID, envelope p2p.Envelope) (err
 	defer func() {
 		if e := recover(); e != nil {
 			err = fmt.Errorf("panic in processing message: %v", e)
-			r.Logger.Error(
-				"recovering from processing message panic",
-				"err", err,
-				"stack", string(debug.Stack()),
-			)
+			r.Logger.Error("recovering from processing message panic", "err", err)
 		}
 	}()
 
 	r.Logger.Debug("received message", "message", envelope.Message, "peer", envelope.From)
 
 	switch chID {
-	case BlockSyncChannel:
-		err = r.handleBlockSyncMessage(envelope)
+	case BlockchainChannel:
+		err = r.handleBlockchainMessage(envelope)
 
 	default:
 		err = fmt.Errorf("unknown channel ID (%d) for envelope (%v)", chID, envelope)
@@ -300,58 +274,55 @@ func (r *Reactor) handleMessage(chID p2p.ChannelID, envelope p2p.Envelope) (err
 	return err
 }
 
-// processBlockSyncCh initiates a blocking process where we listen for and handle
-// envelopes on the BlockSyncChannel and blockSyncOutBridgeCh. Any error encountered during
-// message execution will result in a PeerError being sent on the BlockSyncChannel.
-// When the reactor is stopped, we will catch the signal and close the p2p Channel
+// processBlockchainCh initiates a blocking process where we listen for and handle
+// envelopes on the BlockchainChannel. Any error encountered during message
+// execution will result in a PeerError being sent on the BlockchainChannel. When
+// the reactor is stopped, we will catch the signal and close the p2p Channel
 // gracefully.
-func (r *Reactor) processBlockSyncCh() {
-	defer r.blockSyncCh.Close()
+func (r *Reactor) processBlockchainCh() {
+	defer r.blockchainCh.Close()
 
 	for {
 		select {
-		case envelope := <-r.blockSyncCh.In:
-			if err := r.handleMessage(r.blockSyncCh.ID, envelope); err != nil {
-				r.Logger.Error("failed to process message", "ch_id", r.blockSyncCh.ID, "envelope", envelope, "err", err)
-				r.blockSyncCh.Error <- p2p.PeerError{
-					NodeID: envelope.From,
-					Err:    err,
+		case envelope := <-r.blockchainCh.In():
+			if err := r.handleMessage(r.blockchainCh.ID(), envelope); err != nil {
+				r.Logger.Error("failed to process message", "ch_id", r.blockchainCh.ID(), "envelope", envelope, "err", err)
+				r.blockchainCh.Error() <- p2p.PeerError{
+					PeerID:   envelope.From,
+					Err:      err,
+					Severity: p2p.PeerErrorSeverityLow,
 				}
 			}
 
-		case envelope := <-r.blockSyncOutBridgeCh:
-			r.blockSyncCh.Out <- envelope
-
 		case <-r.closeCh:
-			r.Logger.Debug("stopped listening on block sync channel; closing...")
+			r.Logger.Debug("stopped listening on blockchain channel; closing...")
 			return
-
 		}
 	}
 }
 
 // processPeerUpdate processes a PeerUpdate.
 func (r *Reactor) processPeerUpdate(peerUpdate p2p.PeerUpdate) {
-	r.Logger.Debug("received peer update", "peer", peerUpdate.NodeID, "status", peerUpdate.Status)
+	r.Logger.Debug("received peer update", "peer", peerUpdate.PeerID, "status", peerUpdate.Status)
 
 	// XXX: Pool#RedoRequest can sometimes give us an empty peer.
-	if len(peerUpdate.NodeID) == 0 {
+	if len(peerUpdate.PeerID) == 0 {
 		return
 	}
 
 	switch peerUpdate.Status {
-	case p2p.PeerStatusUp:
+	case p2p.PeerStatusNew, p2p.PeerStatusUp:
 		// send a status update the newly added peer
-		r.blockSyncOutBridgeCh <- p2p.Envelope{
-			To: peerUpdate.NodeID,
+		r.blockchainCh.Out() <- p2p.Envelope{
+			To: peerUpdate.PeerID,
 			Message: &bcproto.StatusResponse{
 				Base:   r.store.Base(),
 				Height: r.store.Height(),
 			},
 		}
 
-	case p2p.PeerStatusDown:
-		r.pool.RemovePeer(peerUpdate.NodeID)
+	case p2p.PeerStatusDown, p2p.PeerStatusRemoved, p2p.PeerStatusBanned:
+		r.pool.RemovePeer(peerUpdate.PeerID)
 	}
 }
 
@@ -373,10 +344,10 @@ func (r *Reactor) processPeerUpdates() {
 	}
 }
 
-// SwitchToBlockSync is called by the state sync reactor when switching to fast
+// SwitchToFastSync is called by the state sync reactor when switching to fast
 // sync.
-func (r *Reactor) SwitchToBlockSync(state sm.State) error {
-	r.blockSync.Set()
+func (r *Reactor) SwitchToFastSync(state sm.State) error {
+	r.fastSync = true
 	r.initialState = state
 	r.pool.height = state.LastBlockHeight + 1
 
@@ -384,11 +355,6 @@ func (r *Reactor) SwitchToBlockSync(state sm.State) error {
 		return err
 	}
 
-	r.syncStartTime = time.Now()
-
-	r.poolWG.Add(1)
-	go r.requestRoutine()
-
 	r.poolWG.Add(1)
 	go r.poolRoutine(true)
 
@@ -399,6 +365,7 @@ func (r *Reactor) requestRoutine() {
 	statusUpdateTicker := time.NewTicker(statusUpdateIntervalSeconds * time.Second)
 	defer statusUpdateTicker.Stop()
 
+	r.poolWG.Add(1)
 	defer r.poolWG.Done()
 
 	for {
@@ -410,15 +377,16 @@ func (r *Reactor) requestRoutine() {
 			return
 
 		case request := <-r.requestsCh:
-			r.blockSyncOutBridgeCh <- p2p.Envelope{
+			r.blockchainCh.Out() <- p2p.Envelope{
 				To:      request.PeerID,
 				Message: &bcproto.BlockRequest{Height: request.Height},
 			}
 
 		case pErr := <-r.errorsCh:
-			r.blockSyncCh.Error <- p2p.PeerError{
-				NodeID: pErr.peerID,
-				Err:    pErr.err,
+			r.blockchainCh.Error() <- p2p.PeerError{
+				PeerID:   pErr.peerID,
+				Err:      pErr.err,
+				Severity: p2p.PeerErrorSeverityLow,
 			}
 
 		case <-statusUpdateTicker.C:
@@ -427,7 +395,7 @@ func (r *Reactor) requestRoutine() {
 			go func() {
 				defer r.poolWG.Done()
 
-				r.blockSyncOutBridgeCh <- p2p.Envelope{
+				r.blockchainCh.Out() <- p2p.Envelope{
 					Broadcast: true,
 					Message:   &bcproto.StatusRequest{},
 				}
@@ -459,6 +427,8 @@ func (r *Reactor) poolRoutine(stateSynced bool) {
 	defer trySyncTicker.Stop()
 	defer switchToConsensusTicker.Stop()
 
+	go r.requestRoutine()
+
 	defer r.poolWG.Done()
 
 FOR_LOOP:
@@ -498,8 +468,6 @@ FOR_LOOP:
 				r.Logger.Error("failed to stop pool", "err", err)
 			}
 
-			r.blockSync.UnSet()
-
 			if r.consReactor != nil {
 				r.consReactor.SwitchToConsensus(state, blocksSynced > 0 || stateSynced)
 			}
@@ -544,15 +512,8 @@ FOR_LOOP:
 			// first.Hash() doesn't verify the tx contents, so MakePartSet() is
 			// currently necessary.
 			err := state.Validators.VerifyCommitLight(chainID, firstID, first.Height, second.LastCommit)
-
-			if err == nil {
-				// validate the block before we persist it
-				err = r.blockExec.ValidateBlock(state, first)
-			}
-
-			// If either of the checks failed we log the error and request for a new block
-			// at that height
 			if err != nil {
+				err = fmt.Errorf("invalid last commit: %w", err)
 				r.Logger.Error(
 					err.Error(),
 					"last_commit", second.LastCommit,
@@ -563,84 +524,57 @@ FOR_LOOP:
 				// NOTE: We've already removed the peer's request, but we still need
 				// to clean up the rest.
 				peerID := r.pool.RedoRequest(first.Height)
-				r.blockSyncCh.Error <- p2p.PeerError{
-					NodeID: peerID,
-					Err:    err,
+				r.blockchainCh.Error() <- p2p.PeerError{
+					PeerID:   peerID,
+					Err:      err,
+					Severity: p2p.PeerErrorSeverityLow,
 				}
 
 				peerID2 := r.pool.RedoRequest(second.Height)
 				if peerID2 != peerID {
-					r.blockSyncCh.Error <- p2p.PeerError{
-						NodeID: peerID2,
-						Err:    err,
+					r.blockchainCh.Error() <- p2p.PeerError{
+						PeerID:   peerID2,
+						Err:      err,
+						Severity: p2p.PeerErrorSeverityLow,
 					}
 				}
 
 				continue FOR_LOOP
-			}
+			} else {
+				r.pool.PopRequest()
 
-			r.pool.PopRequest()
+				// TODO: batch saves so we do not persist to disk every block
+				r.store.SaveBlock(first, firstParts, second.LastCommit)
 
-			// TODO: batch saves so we do not persist to disk every block
-			r.store.SaveBlock(first, firstParts, second.LastCommit)
+				var err error
 
-			// TODO: Same thing for app - but we would need a way to get the hash
-			// without persisting the state.
-			state, err = r.blockExec.ApplyBlock(state, firstID, first)
-			if err != nil {
-				panic(fmt.Sprintf("failed to process committed block (%d:%X): %v", first.Height, first.Hash(), err))
-			}
+				// TODO: Same thing for app - but we would need a way to get the hash
+				// without persisting the state.
+				state, _, err = r.blockExec.ApplyBlock(state, firstID, first)
+				if err != nil {
+					// TODO: This is bad, are we zombie?
+					panic(fmt.Sprintf("failed to process committed block (%d:%X): %v", first.Height, first.Hash(), err))
+				}
 
-			r.metrics.RecordConsMetrics(first)
+				blocksSynced++
 
-			blocksSynced++
+				if blocksSynced%100 == 0 {
+					lastRate = 0.9*lastRate + 0.1*(100/time.Since(lastHundred).Seconds())
+					r.Logger.Info(
+						"fast sync rate",
+						"height", r.pool.height,
+						"max_peer_height", r.pool.MaxPeerHeight(),
+						"blocks/s", lastRate,
+					)
 
-			if blocksSynced%100 == 0 {
-				lastRate = 0.9*lastRate + 0.1*(100/time.Since(lastHundred).Seconds())
-				r.Logger.Info(
-					"block sync rate",
-					"height", r.pool.height,
-					"max_peer_height", r.pool.MaxPeerHeight(),
-					"blocks/s", lastRate,
-				)
-
-				lastHundred = time.Now()
+					lastHundred = time.Now()
+				}
 			}
 
 			continue FOR_LOOP
 
 		case <-r.closeCh:
 			break FOR_LOOP
-		case <-r.pool.Quit():
-			break FOR_LOOP
 		}
 	}
 }
-
-func (r *Reactor) GetMaxPeerBlockHeight() int64 {
-	return r.pool.MaxPeerHeight()
-}
-
-func (r *Reactor) GetTotalSyncedTime() time.Duration {
-	if !r.blockSync.IsSet() || r.syncStartTime.IsZero() {
-		return time.Duration(0)
-	}
-	return time.Since(r.syncStartTime)
-}
-
-func (r *Reactor) GetRemainingSyncTime() time.Duration {
-	if !r.blockSync.IsSet() {
-		return time.Duration(0)
-	}
-
-	targetSyncs := r.pool.targetSyncBlocks()
-	currentSyncs := r.store.Height() - r.pool.startHeight + 1
-	lastSyncRate := r.pool.getLastSyncRate()
-	if currentSyncs < 0 || lastSyncRate < 0.001 {
-		return time.Duration(0)
-	}
-
-	remain := float64(targetSyncs-currentSyncs) / lastSyncRate
-
-	return time.Duration(int64(remain * float64(time.Second)))
-}

blockchain/v0/reactor_test.go

@@ -0,0 +1,405 @@
+package v0
+
+import (
+	"fmt"
+	"math/rand"
+	"os"
+	"testing"
+	"time"
+
+	"github.com/stretchr/testify/require"
+
+	abci "github.com/tendermint/tendermint/abci/types"
+	cfg "github.com/tendermint/tendermint/config"
+	"github.com/tendermint/tendermint/libs/log"
+	"github.com/tendermint/tendermint/mempool/mock"
+	"github.com/tendermint/tendermint/p2p"
+	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
+	"github.com/tendermint/tendermint/proxy"
+	sm "github.com/tendermint/tendermint/state"
+	"github.com/tendermint/tendermint/store"
+	"github.com/tendermint/tendermint/types"
+	dbm "github.com/tendermint/tm-db"
+)
+
+var rng = rand.New(rand.NewSource(time.Now().UnixNano()))
+
+type reactorTestSuite struct {
+	reactor *Reactor
+	app     proxy.AppConns
+
+	peerID p2p.NodeID
+
+	blockchainChannel   *p2p.Channel
+	blockchainInCh      chan p2p.Envelope
+	blockchainOutCh     chan p2p.Envelope
+	blockchainPeerErrCh chan p2p.PeerError
+
+	peerUpdatesCh chan p2p.PeerUpdate
+	peerUpdates   *p2p.PeerUpdatesCh
+}
+
+func setup(
+	t *testing.T,
+	genDoc *types.GenesisDoc,
+	privVals []types.PrivValidator,
+	maxBlockHeight int64,
+	chBuf uint,
+) *reactorTestSuite {
+	t.Helper()
+
+	require.Len(t, privVals, 1, "only one validator can be supported")
+
+	app := &abci.BaseApplication{}
+	cc := proxy.NewLocalClientCreator(app)
+
+	proxyApp := proxy.NewAppConns(cc)
+	require.NoError(t, proxyApp.Start())
+
+	blockDB := dbm.NewMemDB()
+	stateDB := dbm.NewMemDB()
+	stateStore := sm.NewStore(stateDB)
+	blockStore := store.NewBlockStore(blockDB)
+
+	state, err := stateStore.LoadFromDBOrGenesisDoc(genDoc)
+	require.NoError(t, err)
+
+	fastSync := true
+	db := dbm.NewMemDB()
+	stateStore = sm.NewStore(db)
+
+	blockExec := sm.NewBlockExecutor(
+		stateStore,
+		log.TestingLogger(),
+		proxyApp.Consensus(),
+		mock.Mempool{},
+		sm.EmptyEvidencePool{},
+	)
+	require.NoError(t, stateStore.Save(state))
+
+	for blockHeight := int64(1); blockHeight <= maxBlockHeight; blockHeight++ {
+		lastCommit := types.NewCommit(blockHeight-1, 0, types.BlockID{}, nil)
+
+		if blockHeight > 1 {
+			lastBlockMeta := blockStore.LoadBlockMeta(blockHeight - 1)
+			lastBlock := blockStore.LoadBlock(blockHeight - 1)
+
+			vote, err := types.MakeVote(
+				lastBlock.Header.Height,
+				lastBlockMeta.BlockID,
+				state.Validators,
+				privVals[0],
+				lastBlock.Header.ChainID,
+				time.Now(),
+			)
+			require.NoError(t, err)
+
+			lastCommit = types.NewCommit(
+				vote.Height,
+				vote.Round,
+				lastBlockMeta.BlockID,
+				[]types.CommitSig{vote.CommitSig()},
+			)
+		}
+
+		thisBlock := makeBlock(blockHeight, state, lastCommit)
+		thisParts := thisBlock.MakePartSet(types.BlockPartSizeBytes)
+		blockID := types.BlockID{Hash: thisBlock.Hash(), PartSetHeader: thisParts.Header()}
+
+		state, _, err = blockExec.ApplyBlock(state, blockID, thisBlock)
+		require.NoError(t, err)
+
+		blockStore.SaveBlock(thisBlock, thisParts, lastCommit)
+	}
+
+	pID := make([]byte, 16)
+	_, err = rng.Read(pID)
+	require.NoError(t, err)
+
+	peerUpdatesCh := make(chan p2p.PeerUpdate, chBuf)
+
+	rts := &reactorTestSuite{
+		app:                 proxyApp,
+		blockchainInCh:      make(chan p2p.Envelope, chBuf),
+		blockchainOutCh:     make(chan p2p.Envelope, chBuf),
+		blockchainPeerErrCh: make(chan p2p.PeerError, chBuf),
+		peerUpdatesCh:       peerUpdatesCh,
+		peerUpdates:         p2p.NewPeerUpdates(peerUpdatesCh),
+		peerID:              p2p.NodeID(fmt.Sprintf("%x", pID)),
+	}
+
+	rts.blockchainChannel = p2p.NewChannel(
+		BlockchainChannel,
+		new(bcproto.Message),
+		rts.blockchainInCh,
+		rts.blockchainOutCh,
+		rts.blockchainPeerErrCh,
+	)
+
+	reactor, err := NewReactor(
+		log.TestingLogger().With("module", "blockchain", "node", rts.peerID),
+		state.Copy(),
+		blockExec,
+		blockStore,
+		nil,
+		rts.blockchainChannel,
+		rts.peerUpdates,
+		fastSync,
+	)
+
+	require.NoError(t, err)
+	rts.reactor = reactor
+
+	require.NoError(t, rts.reactor.Start())
+	require.True(t, rts.reactor.IsRunning())
+
+	t.Cleanup(func() {
+		require.NoError(t, rts.reactor.Stop())
+		require.NoError(t, rts.app.Stop())
+		require.False(t, rts.reactor.IsRunning())
+	})
+
+	return rts
+}
+
+func simulateRouter(primary *reactorTestSuite, suites []*reactorTestSuite, dropChErr bool) {
+	// create a mapping for efficient suite lookup by peer ID
+	suitesByPeerID := make(map[p2p.NodeID]*reactorTestSuite)
+	for _, suite := range suites {
+		suitesByPeerID[suite.peerID] = suite
+	}
+
+	// Simulate a router by listening for all outbound envelopes and proxying the
+	// envelope to the respective peer (suite).
+	go func() {
+		for envelope := range primary.blockchainOutCh {
+			if envelope.Broadcast {
+				for _, s := range suites {
+					// broadcast to everyone except source
+					if s.peerID != primary.peerID {
+						s.blockchainInCh <- p2p.Envelope{
+							From:    primary.peerID,
+							To:      s.peerID,
+							Message: envelope.Message,
+						}
+					}
+				}
+			} else {
+				suitesByPeerID[envelope.To].blockchainInCh <- p2p.Envelope{
+					From:    primary.peerID,
+					To:      envelope.To,
+					Message: envelope.Message,
+				}
+			}
+		}
+	}()
+
+	go func() {
+		for pErr := range primary.blockchainPeerErrCh {
+			if dropChErr {
+				primary.reactor.Logger.Debug("dropped peer error", "err", pErr.Err)
+			} else {
+				primary.peerUpdatesCh <- p2p.PeerUpdate{
+					PeerID: pErr.PeerID,
+					Status: p2p.PeerStatusRemoved,
+				}
+			}
+		}
+	}()
+}
+
+func TestReactor_AbruptDisconnect(t *testing.T) {
+	config := cfg.ResetTestRoot("blockchain_reactor_test")
+	defer os.RemoveAll(config.RootDir)
+
+	genDoc, privVals := randGenesisDoc(config, 1, false, 30)
+	maxBlockHeight := int64(64)
+	testSuites := []*reactorTestSuite{
+		setup(t, genDoc, privVals, maxBlockHeight, 0),
+		setup(t, genDoc, privVals, 0, 0),
+	}
+
+	require.Equal(t, maxBlockHeight, testSuites[0].reactor.store.Height())
+
+	for _, s := range testSuites {
+		simulateRouter(s, testSuites, true)
+
+		// connect reactor to every other reactor
+		for _, ss := range testSuites {
+			if s.peerID != ss.peerID {
+				s.peerUpdatesCh <- p2p.PeerUpdate{
+					Status: p2p.PeerStatusUp,
+					PeerID: ss.peerID,
+				}
+			}
+		}
+	}
+
+	secondaryPool := testSuites[1].reactor.pool
+	require.Eventually(
+		t,
+		func() bool {
+			height, _, _ := secondaryPool.GetStatus()
+			return secondaryPool.MaxPeerHeight() > 0 && height > 0 && height < 10
+		},
+		10*time.Second,
+		10*time.Millisecond,
+		"expected node to be partially synced",
+	)
+
+	// Remove synced node from the syncing node which should not result in any
+	// deadlocks or race conditions within the context of poolRoutine.
+	testSuites[1].peerUpdatesCh <- p2p.PeerUpdate{
+		Status: p2p.PeerStatusDown,
+		PeerID: testSuites[0].peerID,
+	}
+}
+
+func TestReactor_NoBlockResponse(t *testing.T) {
+	config := cfg.ResetTestRoot("blockchain_reactor_test")
+	defer os.RemoveAll(config.RootDir)
+
+	genDoc, privVals := randGenesisDoc(config, 1, false, 30)
+	maxBlockHeight := int64(65)
+	testSuites := []*reactorTestSuite{
+		setup(t, genDoc, privVals, maxBlockHeight, 0),
+		setup(t, genDoc, privVals, 0, 0),
+	}
+
+	require.Equal(t, maxBlockHeight, testSuites[0].reactor.store.Height())
+
+	for _, s := range testSuites {
+		simulateRouter(s, testSuites, true)
+
+		// connect reactor to every other reactor
+		for _, ss := range testSuites {
+			if s.peerID != ss.peerID {
+				s.peerUpdatesCh <- p2p.PeerUpdate{
+					Status: p2p.PeerStatusUp,
+					PeerID: ss.peerID,
+				}
+			}
+		}
+	}
+
+	testCases := []struct {
+		height   int64
+		existent bool
+	}{
+		{maxBlockHeight + 2, false},
+		{10, true},
+		{1, true},
+		{100, false},
+	}
+
+	secondaryPool := testSuites[1].reactor.pool
+	require.Eventually(
+		t,
+		func() bool { return secondaryPool.MaxPeerHeight() > 0 && secondaryPool.IsCaughtUp() },
+		10*time.Second,
+		10*time.Millisecond,
+		"expected node to be fully synced",
+	)
+
+	for _, tc := range testCases {
+		block := testSuites[1].reactor.store.LoadBlock(tc.height)
+		if tc.existent {
+			require.True(t, block != nil)
+		} else {
+			require.Nil(t, block)
+		}
+	}
+}
+
+func TestReactor_BadBlockStopsPeer(t *testing.T) {
+	config := cfg.ResetTestRoot("blockchain_reactor_test")
+	defer os.RemoveAll(config.RootDir)
+
+	maxBlockHeight := int64(48)
+	genDoc, privVals := randGenesisDoc(config, 1, false, 30)
+
+	testSuites := []*reactorTestSuite{
+		setup(t, genDoc, privVals, maxBlockHeight, 1000), // fully synced node
+		setup(t, genDoc, privVals, 0, 1000),
+		setup(t, genDoc, privVals, 0, 1000),
+		setup(t, genDoc, privVals, 0, 1000),
+		setup(t, genDoc, privVals, 0, 1000), // new node
+	}
+
+	require.Equal(t, maxBlockHeight, testSuites[0].reactor.store.Height())
+
+	for _, s := range testSuites[:len(testSuites)-1] {
+		simulateRouter(s, testSuites, true)
+
+		// connect reactor to every other reactor except the new node
+		for _, ss := range testSuites[:len(testSuites)-1] {
+			if s.peerID != ss.peerID {
+				s.peerUpdatesCh <- p2p.PeerUpdate{
+					Status: p2p.PeerStatusUp,
+					PeerID: ss.peerID,
+				}
+			}
+		}
+	}
+
+	require.Eventually(
+		t,
+		func() bool {
+			caughtUp := true
+			for _, s := range testSuites[1 : len(testSuites)-1] {
+				if s.reactor.pool.MaxPeerHeight() == 0 || !s.reactor.pool.IsCaughtUp() {
+					caughtUp = false
+				}
+			}
+
+			return caughtUp
+		},
+		10*time.Minute,
+		10*time.Millisecond,
+		"expected all nodes to be fully synced",
+	)
+
+	for _, s := range testSuites[:len(testSuites)-1] {
+		require.Len(t, s.reactor.pool.peers, 3)
+	}
+
+	// Mark testSuites[3] as an invalid peer which will cause newSuite to disconnect
+	// from this peer.
+	otherGenDoc, otherPrivVals := randGenesisDoc(config, 1, false, 30)
+	otherSuite := setup(t, otherGenDoc, otherPrivVals, maxBlockHeight, 0)
+	testSuites[3].reactor.store = otherSuite.reactor.store
+
+	// add a fake peer just so we do not wait for the consensus ticker to timeout
+	otherSuite.reactor.pool.SetPeerRange("00ff", 10, 10)
+
+	// start the new peer's faux router
+	newSuite := testSuites[len(testSuites)-1]
+	simulateRouter(newSuite, testSuites, false)
+
+	// connect all nodes to the new peer
+	for _, s := range testSuites[:len(testSuites)-1] {
+		newSuite.peerUpdatesCh <- p2p.PeerUpdate{
+			Status: p2p.PeerStatusUp,
+			PeerID: s.peerID,
+		}
+	}
+
+	// wait for the new peer to catch up and become fully synced
+	require.Eventually(
+		t,
+		func() bool { return newSuite.reactor.pool.MaxPeerHeight() > 0 && newSuite.reactor.pool.IsCaughtUp() },
+		10*time.Minute,
+		10*time.Millisecond,
+		"expected new node to be fully synced",
+	)
+
+	require.Eventuallyf(
+		t,
+		func() bool { return len(newSuite.reactor.pool.peers) < len(testSuites)-1 },
+		10*time.Minute,
+		10*time.Millisecond,
+		"invalid number of peers; expected < %d, got: %d",
+		len(testSuites)-1,
+		len(newSuite.reactor.pool.peers),
+	)
+}

blockchain/v0/test_util.go

@@ -0,0 +1,50 @@
+package v0
+
+import (
+	"sort"
+
+	cfg "github.com/tendermint/tendermint/config"
+	sm "github.com/tendermint/tendermint/state"
+	"github.com/tendermint/tendermint/types"
+	tmtime "github.com/tendermint/tendermint/types/time"
+)
+
+func randGenesisDoc(
+	config *cfg.Config,
+	numValidators int,
+	randPower bool,
+	minPower int64,
+) (*types.GenesisDoc, []types.PrivValidator) {
+	validators := make([]types.GenesisValidator, numValidators)
+	privValidators := make([]types.PrivValidator, numValidators)
+
+	for i := 0; i < numValidators; i++ {
+		val, privVal := types.RandValidator(randPower, minPower)
+		validators[i] = types.GenesisValidator{
+			PubKey: val.PubKey,
+			Power:  val.VotingPower,
+		}
+
+		privValidators[i] = privVal
+	}
+
+	sort.Sort(types.PrivValidatorsByAddress(privValidators))
+
+	return &types.GenesisDoc{
+		GenesisTime: tmtime.Now(),
+		ChainID:     config.ChainID(),
+		Validators:  validators,
+	}, privValidators
+}
+
+func makeTxs(height int64) (txs []types.Tx) {
+	for i := 0; i < 10; i++ {
+		txs = append(txs, types.Tx([]byte{byte(height), byte(i)}))
+	}
+	return txs
+}
+
+func makeBlock(height int64, state sm.State, lastCommit *types.Commit) *types.Block {
+	block, _ := state.MakeBlock(height, makeTxs(height), lastCommit, nil, state.Validators.GetProposer().Address)
+	return block
+}

blockchain/v2/io.go

@@ -4,9 +4,9 @@ import (
 	"errors"
 
 	"github.com/gogo/protobuf/proto"
-	"github.com/tendermint/tendermint/internal/p2p"
-	"github.com/tendermint/tendermint/internal/state"
-	bcproto "github.com/tendermint/tendermint/proto/tendermint/blocksync"
+	"github.com/tendermint/tendermint/p2p"
+	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
+	"github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -42,7 +42,7 @@ const (
 )
 
 type consensusReactor interface {
-	// for when we switch from blockchain reactor and block sync to
+	// for when we switch from blockchain reactor and fast sync to
 	// the consensus machine
 	SwitchToConsensus(state state.State, skipWAL bool)
 }

blockchain/v2/processor.go

@@ -3,7 +3,8 @@ package v2
 import (
 	"fmt"
 
-	tmstate "github.com/tendermint/tendermint/internal/state"
+	"github.com/tendermint/tendermint/p2p"
+	tmState "github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -12,8 +13,8 @@ import (
 type pcBlockVerificationFailure struct {
 	priorityNormal
 	height       int64
-	firstPeerID  types.NodeID
-	secondPeerID types.NodeID
+	firstPeerID  p2p.NodeID
+	secondPeerID p2p.NodeID
 }
 
 func (e pcBlockVerificationFailure) String() string {
@@ -25,7 +26,7 @@ func (e pcBlockVerificationFailure) String() string {
 type pcBlockProcessed struct {
 	priorityNormal
 	height int64
-	peerID types.NodeID
+	peerID p2p.NodeID
 }
 
 func (e pcBlockProcessed) String() string {
@@ -36,7 +37,7 @@ func (e pcBlockProcessed) String() string {
 type pcFinished struct {
 	priorityNormal
 	blocksSynced int
-	tmState      tmstate.State
+	tmState      tmState.State
 }
 
 func (p pcFinished) Error() string {
@@ -45,7 +46,7 @@ func (p pcFinished) Error() string {
 
 type queueItem struct {
 	block  *types.Block
-	peerID types.NodeID
+	peerID p2p.NodeID
 }
 
 type blockQueue map[int64]queueItem
@@ -94,7 +95,7 @@ func (state *pcState) synced() bool {
 	return len(state.queue) <= 1
 }
 
-func (state *pcState) enqueue(peerID types.NodeID, block *types.Block, height int64) {
+func (state *pcState) enqueue(peerID p2p.NodeID, block *types.Block, height int64) {
 	if item, ok := state.queue[height]; ok {
 		panic(fmt.Sprintf(
 			"duplicate block %d (%X) enqueued by processor (sent by %v; existing block %X from %v)",
@@ -109,7 +110,7 @@ func (state *pcState) height() int64 {
 }
 
 // purgePeer moves all unprocessed blocks from the queue
-func (state *pcState) purgePeer(peerID types.NodeID) {
+func (state *pcState) purgePeer(peerID p2p.NodeID) {
 	// what if height is less than state.height?
 	for height, item := range state.queue {
 		if item.peerID == peerID {
@@ -148,11 +149,11 @@ func (state *pcState) handle(event Event) (Event, error) {
 		return noOp, nil
 
 	case rProcessBlock:
-		tmstate := state.context.tmState()
+		tmState := state.context.tmState()
 		firstItem, secondItem, err := state.nextTwo()
 		if err != nil {
 			if state.draining {
-				return pcFinished{tmState: tmstate, blocksSynced: state.blocksSynced}, nil
+				return pcFinished{tmState: tmState, blocksSynced: state.blocksSynced}, nil
 			}
 			return noOp, nil
 		}
@@ -164,7 +165,7 @@ func (state *pcState) handle(event Event) (Event, error) {
 		)
 
 		// verify if +second+ last commit "confirms" +first+ block
-		err = state.context.verifyCommit(tmstate.ChainID, firstID, first.Height, second.LastCommit)
+		err = state.context.verifyCommit(tmState.ChainID, firstID, first.Height, second.LastCommit)
 		if err != nil {
 			state.purgePeer(firstItem.peerID)
 			if firstItem.peerID != secondItem.peerID {
@@ -181,8 +182,6 @@ func (state *pcState) handle(event Event) (Event, error) {
 			panic(fmt.Sprintf("failed to process committed block (%d:%X): %v", first.Height, first.Hash(), err))
 		}
 
-		state.context.recordConsMetrics(first)
-
 		delete(state.queue, first.Height)
 		state.blocksSynced++
 

blockchain/v2/processor_context.go

@@ -3,8 +3,7 @@ package v2
 import (
 	"fmt"
 
-	"github.com/tendermint/tendermint/internal/consensus"
-	"github.com/tendermint/tendermint/internal/state"
+	"github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -14,27 +13,24 @@ type processorContext interface {
 	saveBlock(block *types.Block, blockParts *types.PartSet, seenCommit *types.Commit)
 	tmState() state.State
 	setState(state.State)
-	recordConsMetrics(block *types.Block)
 }
 
 type pContext struct {
 	store   blockStore
 	applier blockApplier
 	state   state.State
-	metrics *consensus.Metrics
 }
 
-func newProcessorContext(st blockStore, ex blockApplier, s state.State, m *consensus.Metrics) *pContext {
+func newProcessorContext(st blockStore, ex blockApplier, s state.State) *pContext {
 	return &pContext{
 		store:   st,
 		applier: ex,
 		state:   s,
-		metrics: m,
 	}
 }
 
 func (pc *pContext) applyBlock(blockID types.BlockID, block *types.Block) error {
-	newState, err := pc.applier.ApplyBlock(pc.state, blockID, block)
+	newState, _, err := pc.applier.ApplyBlock(pc.state, blockID, block)
 	pc.state = newState
 	return err
 }
@@ -55,10 +51,6 @@ func (pc *pContext) saveBlock(block *types.Block, blockParts *types.PartSet, see
 	pc.store.SaveBlock(block, blockParts, seenCommit)
 }
 
-func (pc *pContext) recordConsMetrics(block *types.Block) {
-	pc.metrics.RecordConsMetrics(block)
-}
-
 type mockPContext struct {
 	applicationBL  []int64
 	verificationBL []int64
@@ -106,7 +98,3 @@ func (mpc *mockPContext) setState(state state.State) {
 func (mpc *mockPContext) tmState() state.State {
 	return mpc.state
 }
-
-func (mpc *mockPContext) recordConsMetrics(block *types.Block) {
-
-}

blockchain/v2/processor_test.go

@@ -5,7 +5,8 @@ import (
 
 	"github.com/stretchr/testify/assert"
 
-	tmstate "github.com/tendermint/tendermint/internal/state"
+	"github.com/tendermint/tendermint/p2p"
+	tmState "github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -33,13 +34,13 @@ func makePcBlock(height int64) *types.Block {
 // makeState takes test parameters and creates a specific processor state.
 func makeState(p *params) *pcState {
 	var (
-		tmState = tmstate.State{LastBlockHeight: p.height}
+		tmState = tmState.State{LastBlockHeight: p.height}
 		context = newMockProcessorContext(tmState, p.verBL, p.appBL)
 	)
 	state := newPcState(context)
 
 	for _, item := range p.items {
-		state.enqueue(types.NodeID(item.pid), makePcBlock(item.height), item.height)
+		state.enqueue(p2p.NodeID(item.pid), makePcBlock(item.height), item.height)
 	}
 
 	state.blocksSynced = p.blocksSynced
@@ -47,7 +48,7 @@ func makeState(p *params) *pcState {
 	return state
 }
 
-func mBlockResponse(peerID types.NodeID, height int64) scBlockReceived {
+func mBlockResponse(peerID p2p.NodeID, height int64) scBlockReceived {
 	return scBlockReceived{
 		peerID: peerID,
 		block:  makePcBlock(height),
@@ -81,7 +82,7 @@ func executeProcessorTests(t *testing.T, tests []testFields) {
 					}
 				}()
 
-				// First step must always initialize the currentState as state.
+				// First step must always initialise the currentState as state.
 				if step.currentState != nil {
 					state = makeState(step.currentState)
 				}
@@ -207,7 +208,7 @@ func TestRProcessBlockSuccess(t *testing.T) {
 				{ // finish when H+1 or/and H+2 are missing
 					event:         rProcessBlock{},
 					wantState:     &params{height: 1, items: []pcBlock{{"P2", 2}, {"P1", 4}}, blocksSynced: 1, draining: true},
-					wantNextEvent: pcFinished{tmState: tmstate.State{LastBlockHeight: 1}, blocksSynced: 1},
+					wantNextEvent: pcFinished{tmState: tmState.State{LastBlockHeight: 1}, blocksSynced: 1},
 				},
 			},
 		},
@@ -271,7 +272,7 @@ func TestScFinishedEv(t *testing.T) {
 				{
 					currentState: &params{height: 100, items: []pcBlock{}, blocksSynced: 100}, event: scFinishedEv{},
 					wantState:     &params{height: 100, items: []pcBlock{}, blocksSynced: 100},
-					wantNextEvent: pcFinished{tmState: tmstate.State{LastBlockHeight: 100}, blocksSynced: 100},
+					wantNextEvent: pcFinished{tmState: tmState.State{LastBlockHeight: 100}, blocksSynced: 100},
 				},
 			},
 		},
@@ -282,7 +283,7 @@ func TestScFinishedEv(t *testing.T) {
 					currentState: &params{height: 100, items: []pcBlock{
 						{"P1", 101}}, blocksSynced: 100}, event: scFinishedEv{},
 					wantState:     &params{height: 100, items: []pcBlock{{"P1", 101}}, blocksSynced: 100},
-					wantNextEvent: pcFinished{tmState: tmstate.State{LastBlockHeight: 100}, blocksSynced: 100},
+					wantNextEvent: pcFinished{tmState: tmState.State{LastBlockHeight: 100}, blocksSynced: 100},
 				},
 			},
 		},

blockchain/v2/reactor.go

@@ -5,17 +5,15 @@ import (
 	"fmt"
 	"time"
 
-	"github.com/gogo/protobuf/proto"
+	proto "github.com/gogo/protobuf/proto"
 
-	"github.com/tendermint/tendermint/internal/blocksync"
-	"github.com/tendermint/tendermint/internal/blocksync/v2/internal/behavior"
-	"github.com/tendermint/tendermint/internal/consensus"
-	tmsync "github.com/tendermint/tendermint/internal/libs/sync"
-	"github.com/tendermint/tendermint/internal/p2p"
-	"github.com/tendermint/tendermint/internal/state"
+	"github.com/tendermint/tendermint/behaviour"
+	bc "github.com/tendermint/tendermint/blockchain"
 	"github.com/tendermint/tendermint/libs/log"
-	"github.com/tendermint/tendermint/libs/sync"
-	bcproto "github.com/tendermint/tendermint/proto/tendermint/blocksync"
+	tmsync "github.com/tendermint/tendermint/libs/sync"
+	"github.com/tendermint/tendermint/p2p"
+	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
+	"github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -31,12 +29,12 @@ type blockStore interface {
 	Height() int64
 }
 
-// BlockchainReactor handles block sync protocol.
+// BlockchainReactor handles fast sync protocol.
 type BlockchainReactor struct {
 	p2p.BaseReactor
 
-	blockSync   *sync.AtomicBool // enable block sync on start when it's been Set
-	stateSynced bool             // set to true when SwitchToBlockSync is called by state sync
+	fastSync    bool // if true, enable fast sync on start
+	stateSynced bool // set to true when SwitchToFastSync is called by state sync
 	scheduler   *Routine
 	processor   *Routine
 	logger      log.Logger
@@ -44,44 +42,37 @@ type BlockchainReactor struct {
 	mtx           tmsync.RWMutex
 	maxPeerHeight int64
 	syncHeight    int64
-	events        chan Event // non-nil during a block sync
+	events        chan Event // non-nil during a fast sync
 
-	reporter behavior.Reporter
+	reporter behaviour.Reporter
 	io       iIO
 	store    blockStore
-
-	syncStartTime   time.Time
-	syncStartHeight int64
-	lastSyncRate    float64 // # blocks sync per sec base on the last 100 blocks
 }
 
 type blockApplier interface {
-	ApplyBlock(state state.State, blockID types.BlockID, block *types.Block) (state.State, error)
+	ApplyBlock(state state.State, blockID types.BlockID, block *types.Block) (state.State, int64, error)
 }
 
 // XXX: unify naming in this package around tmState
-func newReactor(state state.State, store blockStore, reporter behavior.Reporter,
-	blockApplier blockApplier, blockSync bool, metrics *consensus.Metrics) *BlockchainReactor {
+func newReactor(state state.State, store blockStore, reporter behaviour.Reporter,
+	blockApplier blockApplier, fastSync bool) *BlockchainReactor {
 	initHeight := state.LastBlockHeight + 1
 	if initHeight == 1 {
 		initHeight = state.InitialHeight
 	}
 	scheduler := newScheduler(initHeight, time.Now())
-	pContext := newProcessorContext(store, blockApplier, state, metrics)
+	pContext := newProcessorContext(store, blockApplier, state)
 	// TODO: Fix naming to just newProcesssor
 	// newPcState requires a processorContext
 	processor := newPcState(pContext)
 
 	return &BlockchainReactor{
-		scheduler:       newRoutine("scheduler", scheduler.handle, chBufferSize),
-		processor:       newRoutine("processor", processor.handle, chBufferSize),
-		store:           store,
-		reporter:        reporter,
-		logger:          log.NewNopLogger(),
-		blockSync:       sync.NewBool(blockSync),
-		syncStartHeight: initHeight,
-		syncStartTime:   time.Time{},
-		lastSyncRate:    0,
+		scheduler: newRoutine("scheduler", scheduler.handle, chBufferSize),
+		processor: newRoutine("processor", processor.handle, chBufferSize),
+		store:     store,
+		reporter:  reporter,
+		logger:    log.NewNopLogger(),
+		fastSync:  fastSync,
 	}
 }
 
@@ -90,10 +81,9 @@ func NewBlockchainReactor(
 	state state.State,
 	blockApplier blockApplier,
 	store blockStore,
-	blockSync bool,
-	metrics *consensus.Metrics) *BlockchainReactor {
-	reporter := behavior.NewMockReporter()
-	return newReactor(state, store, reporter, blockApplier, blockSync, metrics)
+	fastSync bool) *BlockchainReactor {
+	reporter := behaviour.NewMockReporter()
+	return newReactor(state, store, reporter, blockApplier, fastSync)
 }
 
 // SetSwitch implements Reactor interface.
@@ -136,23 +126,23 @@ func (r *BlockchainReactor) SetLogger(logger log.Logger) {
 
 // Start implements cmn.Service interface
 func (r *BlockchainReactor) Start() error {
-	r.reporter = behavior.NewSwitchReporter(r.BaseReactor.Switch)
-	if r.blockSync.IsSet() {
+	r.reporter = behaviour.NewSwitchReporter(r.BaseReactor.Switch)
+	if r.fastSync {
 		err := r.startSync(nil)
 		if err != nil {
-			return fmt.Errorf("failed to start block sync: %w", err)
+			return fmt.Errorf("failed to start fast sync: %w", err)
 		}
 	}
 	return nil
 }
 
-// startSync begins a block sync, signaled by r.events being non-nil. If state is non-nil,
+// startSync begins a fast sync, signalled by r.events being non-nil. If state is non-nil,
 // the scheduler and processor is updated with this state on startup.
 func (r *BlockchainReactor) startSync(state *state.State) error {
 	r.mtx.Lock()
 	defer r.mtx.Unlock()
 	if r.events != nil {
-		return errors.New("block sync already in progress")
+		return errors.New("fast sync already in progress")
 	}
 	r.events = make(chan Event, chBufferSize)
 	go r.scheduler.start()
@@ -167,7 +157,7 @@ func (r *BlockchainReactor) startSync(state *state.State) error {
 	return nil
 }
 
-// endSync ends a block sync
+// endSync ends a fast sync
 func (r *BlockchainReactor) endSync() {
 	r.mtx.Lock()
 	defer r.mtx.Unlock()
@@ -179,17 +169,11 @@ func (r *BlockchainReactor) endSync() {
 	r.processor.stop()
 }
 
-// SwitchToBlockSync is called by the state sync reactor when switching to block sync.
-func (r *BlockchainReactor) SwitchToBlockSync(state state.State) error {
+// SwitchToFastSync is called by the state sync reactor when switching to fast sync.
+func (r *BlockchainReactor) SwitchToFastSync(state state.State) error {
 	r.stateSynced = true
 	state = state.Copy()
-
-	err := r.startSync(&state)
-	if err == nil {
-		r.syncStartTime = time.Now()
-	}
-
-	return err
+	return r.startSync(&state)
 }
 
 // reactor generated ticker events:
@@ -227,7 +211,7 @@ func (e rProcessBlock) String() string {
 type bcBlockResponse struct {
 	priorityNormal
 	time   time.Time
-	peerID types.NodeID
+	peerID p2p.NodeID
 	size   int64
 	block  *types.Block
 }
@@ -241,7 +225,7 @@ func (resp bcBlockResponse) String() string {
 type bcNoBlockResponse struct {
 	priorityNormal
 	time   time.Time
-	peerID types.NodeID
+	peerID p2p.NodeID
 	height int64
 }
 
@@ -254,7 +238,7 @@ func (resp bcNoBlockResponse) String() string {
 type bcStatusResponse struct {
 	priorityNormal
 	time   time.Time
-	peerID types.NodeID
+	peerID p2p.NodeID
 	base   int64
 	height int64
 }
@@ -267,7 +251,7 @@ func (resp bcStatusResponse) String() string {
 // new peer is connected
 type bcAddNewPeer struct {
 	priorityNormal
-	peerID types.NodeID
+	peerID p2p.NodeID
 }
 
 func (resp bcAddNewPeer) String() string {
@@ -277,7 +261,7 @@ func (resp bcAddNewPeer) String() string {
 // existing peer is removed
 type bcRemovePeer struct {
 	priorityHigh
-	peerID types.NodeID
+	peerID p2p.NodeID
 	reason interface{}
 }
 
@@ -297,6 +281,7 @@ func (e bcResetState) String() string {
 
 // Takes the channel as a parameter to avoid race conditions on r.events.
 func (r *BlockchainReactor) demux(events <-chan Event) {
+	var lastRate = 0.0
 	var lastHundred = time.Now()
 
 	var (
@@ -391,7 +376,7 @@ func (r *BlockchainReactor) demux(events <-chan Event) {
 				r.processor.send(event)
 			case scPeerError:
 				r.processor.send(event)
-				if err := r.reporter.Report(behavior.BadMessage(event.peerID, "scPeerError")); err != nil {
+				if err := r.reporter.Report(behaviour.BadMessage(event.peerID, "scPeerError")); err != nil {
 					r.logger.Error("Error reporting peer", "err", err)
 				}
 			case scBlockRequest:
@@ -427,27 +412,21 @@ func (r *BlockchainReactor) demux(events <-chan Event) {
 			switch event := event.(type) {
 			case pcBlockProcessed:
 				r.setSyncHeight(event.height)
-				if (r.syncHeight-r.syncStartHeight)%100 == 0 {
-					newSyncRate := 100 / time.Since(lastHundred).Seconds()
-					if r.lastSyncRate == 0 {
-						r.lastSyncRate = newSyncRate
-					} else {
-						r.lastSyncRate = 0.9*r.lastSyncRate + 0.1*newSyncRate
-					}
-					r.logger.Info("block sync Rate", "height", r.syncHeight,
-						"max_peer_height", r.maxPeerHeight, "blocks/s", r.lastSyncRate)
+				if r.syncHeight%100 == 0 {
+					lastRate = 0.9*lastRate + 0.1*(100/time.Since(lastHundred).Seconds())
+					r.logger.Info("Fast Sync Rate", "height", r.syncHeight,
+						"max_peer_height", r.maxPeerHeight, "blocks/s", lastRate)
 					lastHundred = time.Now()
 				}
 				r.scheduler.send(event)
 			case pcBlockVerificationFailure:
 				r.scheduler.send(event)
 			case pcFinished:
-				r.logger.Info("block sync complete, switching to consensus")
+				r.logger.Info("Fast sync complete, switching to consensus")
 				if !r.io.trySwitchToConsensus(event.tmState, event.blocksSynced > 0 || r.stateSynced) {
 					r.logger.Error("Failed to switch to consensus reactor")
 				}
 				r.endSync()
-				r.blockSync.UnSet()
 				return
 			case noOpEvent:
 			default:
@@ -493,13 +472,13 @@ func (r *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
 
 	if err := proto.Unmarshal(msgBytes, msgProto); err != nil {
 		logger.Error("error decoding message", "err", err)
-		_ = r.reporter.Report(behavior.BadMessage(src.ID(), err.Error()))
+		_ = r.reporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
 		return
 	}
 
 	if err := msgProto.Validate(); err != nil {
 		logger.Error("peer sent us an invalid msg", "msg", msgProto, "err", err)
-		_ = r.reporter.Report(behavior.BadMessage(src.ID(), err.Error()))
+		_ = r.reporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
 		return
 	}
 
@@ -539,7 +518,7 @@ func (r *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
 		bi, err := types.BlockFromProto(msg.BlockResponse.Block)
 		if err != nil {
 			logger.Error("error transitioning block from protobuf", "err", err)
-			_ = r.reporter.Report(behavior.BadMessage(src.ID(), err.Error()))
+			_ = r.reporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
 			return
 		}
 		r.mtx.RLock()
@@ -604,40 +583,8 @@ func (r *BlockchainReactor) GetChannels() []*p2p.ChannelDescriptor {
 			ID:                  BlockchainChannel,
 			Priority:            5,
 			SendQueueCapacity:   2000,
-			RecvBufferCapacity:  1024,
-			RecvMessageCapacity: blocksync.MaxMsgSize,
+			RecvBufferCapacity:  50 * 4096,
+			RecvMessageCapacity: bc.MaxMsgSize,
 		},
 	}
 }
-
-func (r *BlockchainReactor) GetMaxPeerBlockHeight() int64 {
-	r.mtx.RLock()
-	defer r.mtx.RUnlock()
-	return r.maxPeerHeight
-}
-
-func (r *BlockchainReactor) GetTotalSyncedTime() time.Duration {
-	if !r.blockSync.IsSet() || r.syncStartTime.IsZero() {
-		return time.Duration(0)
-	}
-	return time.Since(r.syncStartTime)
-}
-
-func (r *BlockchainReactor) GetRemainingSyncTime() time.Duration {
-	if !r.blockSync.IsSet() {
-		return time.Duration(0)
-	}
-
-	r.mtx.RLock()
-	defer r.mtx.RUnlock()
-
-	targetSyncs := r.maxPeerHeight - r.syncStartHeight
-	currentSyncs := r.syncHeight - r.syncStartHeight + 1
-	if currentSyncs < 0 || r.lastSyncRate < 0.001 {
-		return time.Duration(0)
-	}
-
-	remain := float64(targetSyncs-currentSyncs) / r.lastSyncRate
-
-	return time.Duration(int64(remain * float64(time.Second)))
-}

blockchain/v2/reactor_test.go

@@ -0,0 +1,576 @@
+package v2
+
+import (
+	"fmt"
+	"net"
+	"os"
+	"sort"
+	"sync"
+	"testing"
+	"time"
+
+	"github.com/gogo/protobuf/proto"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	dbm "github.com/tendermint/tm-db"
+
+	abci "github.com/tendermint/tendermint/abci/types"
+	"github.com/tendermint/tendermint/behaviour"
+	cfg "github.com/tendermint/tendermint/config"
+	"github.com/tendermint/tendermint/libs/log"
+	"github.com/tendermint/tendermint/libs/service"
+	"github.com/tendermint/tendermint/mempool/mock"
+	"github.com/tendermint/tendermint/p2p"
+	"github.com/tendermint/tendermint/p2p/conn"
+	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
+	"github.com/tendermint/tendermint/proxy"
+	sm "github.com/tendermint/tendermint/state"
+	"github.com/tendermint/tendermint/store"
+	"github.com/tendermint/tendermint/types"
+	tmtime "github.com/tendermint/tendermint/types/time"
+)
+
+type mockPeer struct {
+	service.Service
+	id p2p.NodeID
+}
+
+func (mp mockPeer) FlushStop()           {}
+func (mp mockPeer) ID() p2p.NodeID       { return mp.id }
+func (mp mockPeer) RemoteIP() net.IP     { return net.IP{} }
+func (mp mockPeer) RemoteAddr() net.Addr { return &net.TCPAddr{IP: mp.RemoteIP(), Port: 8800} }
+
+func (mp mockPeer) IsOutbound() bool   { return true }
+func (mp mockPeer) IsPersistent() bool { return true }
+func (mp mockPeer) CloseConn() error   { return nil }
+
+func (mp mockPeer) NodeInfo() p2p.NodeInfo {
+	return p2p.NodeInfo{
+		NodeID:     "",
+		ListenAddr: "",
+	}
+}
+func (mp mockPeer) Status() conn.ConnectionStatus { return conn.ConnectionStatus{} }
+func (mp mockPeer) SocketAddr() *p2p.NetAddress   { return &p2p.NetAddress{} }
+
+func (mp mockPeer) Send(byte, []byte) bool    { return true }
+func (mp mockPeer) TrySend(byte, []byte) bool { return true }
+
+func (mp mockPeer) Set(string, interface{}) {}
+func (mp mockPeer) Get(string) interface{}  { return struct{}{} }
+
+//nolint:unused
+type mockBlockStore struct {
+	blocks map[int64]*types.Block
+}
+
+func (ml *mockBlockStore) Height() int64 {
+	return int64(len(ml.blocks))
+}
+
+func (ml *mockBlockStore) LoadBlock(height int64) *types.Block {
+	return ml.blocks[height]
+}
+
+func (ml *mockBlockStore) SaveBlock(block *types.Block, part *types.PartSet, commit *types.Commit) {
+	ml.blocks[block.Height] = block
+}
+
+type mockBlockApplier struct {
+}
+
+// XXX: Add whitelist/blacklist?
+func (mba *mockBlockApplier) ApplyBlock(
+	state sm.State, blockID types.BlockID, block *types.Block,
+) (sm.State, int64, error) {
+	state.LastBlockHeight++
+	return state, 0, nil
+}
+
+type mockSwitchIo struct {
+	mtx                 sync.Mutex
+	switchedToConsensus bool
+	numStatusResponse   int
+	numBlockResponse    int
+	numNoBlockResponse  int
+	numStatusRequest    int
+}
+
+var _ iIO = (*mockSwitchIo)(nil)
+
+func (sio *mockSwitchIo) sendBlockRequest(_ p2p.Peer, _ int64) error {
+	return nil
+}
+
+func (sio *mockSwitchIo) sendStatusResponse(_, _ int64, _ p2p.Peer) error {
+	sio.mtx.Lock()
+	defer sio.mtx.Unlock()
+	sio.numStatusResponse++
+	return nil
+}
+
+func (sio *mockSwitchIo) sendBlockToPeer(_ *types.Block, _ p2p.Peer) error {
+	sio.mtx.Lock()
+	defer sio.mtx.Unlock()
+	sio.numBlockResponse++
+	return nil
+}
+
+func (sio *mockSwitchIo) sendBlockNotFound(_ int64, _ p2p.Peer) error {
+	sio.mtx.Lock()
+	defer sio.mtx.Unlock()
+	sio.numNoBlockResponse++
+	return nil
+}
+
+func (sio *mockSwitchIo) trySwitchToConsensus(_ sm.State, _ bool) bool {
+	sio.mtx.Lock()
+	defer sio.mtx.Unlock()
+	sio.switchedToConsensus = true
+	return true
+}
+
+func (sio *mockSwitchIo) broadcastStatusRequest() error {
+	return nil
+}
+
+func (sio *mockSwitchIo) sendStatusRequest(_ p2p.Peer) error {
+	sio.mtx.Lock()
+	defer sio.mtx.Unlock()
+	sio.numStatusRequest++
+	return nil
+}
+
+type testReactorParams struct {
+	logger      log.Logger
+	genDoc      *types.GenesisDoc
+	privVals    []types.PrivValidator
+	startHeight int64
+	mockA       bool
+}
+
+func newTestReactor(p testReactorParams) *BlockchainReactor {
+	store, state, _ := newReactorStore(p.genDoc, p.privVals, p.startHeight)
+	reporter := behaviour.NewMockReporter()
+
+	var appl blockApplier
+
+	if p.mockA {
+		appl = &mockBlockApplier{}
+	} else {
+		app := &testApp{}
+		cc := proxy.NewLocalClientCreator(app)
+		proxyApp := proxy.NewAppConns(cc)
+		err := proxyApp.Start()
+		if err != nil {
+			panic(fmt.Errorf("error start app: %w", err))
+		}
+		db := dbm.NewMemDB()
+		stateStore := sm.NewStore(db)
+		appl = sm.NewBlockExecutor(stateStore, p.logger, proxyApp.Consensus(), mock.Mempool{}, sm.EmptyEvidencePool{})
+		if err = stateStore.Save(state); err != nil {
+			panic(err)
+		}
+	}
+
+	r := newReactor(state, store, reporter, appl, true)
+	logger := log.TestingLogger()
+	r.SetLogger(logger.With("module", "blockchain"))
+
+	return r
+}
+
+// This test is left here and not deleted to retain the termination cases for
+// future improvement in [#4482](https://github.com/tendermint/tendermint/issues/4482).
+// func TestReactorTerminationScenarios(t *testing.T) {
+
+// 	config := cfg.ResetTestRoot("blockchain_reactor_v2_test")
+// 	defer os.RemoveAll(config.RootDir)
+// 	genDoc, privVals := randGenesisDoc(config.ChainID(), 1, false, 30)
+// 	refStore, _, _ := newReactorStore(genDoc, privVals, 20)
+
+// 	params := testReactorParams{
+// 		logger:      log.TestingLogger(),
+// 		genDoc:      genDoc,
+// 		privVals:    privVals,
+// 		startHeight: 10,
+// 		bufferSize:  100,
+// 		mockA:       true,
+// 	}
+
+// 	type testEvent struct {
+// 		evType string
+// 		peer   string
+// 		height int64
+// 	}
+
+// 	tests := []struct {
+// 		name   string
+// 		params testReactorParams
+// 		msgs   []testEvent
+// 	}{
+// 		{
+// 			name:   "simple termination on max peer height - one peer",
+// 			params: params,
+// 			msgs: []testEvent{
+// 				{evType: "AddPeer", peer: "P1"},
+// 				{evType: "ReceiveS", peer: "P1", height: 13},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P1", height: 11},
+// 				{evType: "BlockReq"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P1", height: 12},
+// 				{evType: "Process"},
+// 				{evType: "ReceiveB", peer: "P1", height: 13},
+// 				{evType: "Process"},
+// 			},
+// 		},
+// 		{
+// 			name:   "simple termination on max peer height - two peers",
+// 			params: params,
+// 			msgs: []testEvent{
+// 				{evType: "AddPeer", peer: "P1"},
+// 				{evType: "AddPeer", peer: "P2"},
+// 				{evType: "ReceiveS", peer: "P1", height: 13},
+// 				{evType: "ReceiveS", peer: "P2", height: 15},
+// 				{evType: "BlockReq"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P1", height: 11},
+// 				{evType: "ReceiveB", peer: "P2", height: 12},
+// 				{evType: "Process"},
+// 				{evType: "BlockReq"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P1", height: 13},
+// 				{evType: "Process"},
+// 				{evType: "ReceiveB", peer: "P2", height: 14},
+// 				{evType: "Process"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P2", height: 15},
+// 				{evType: "Process"},
+// 			},
+// 		},
+// 		{
+// 			name:   "termination on max peer height - two peers, noBlock error",
+// 			params: params,
+// 			msgs: []testEvent{
+// 				{evType: "AddPeer", peer: "P1"},
+// 				{evType: "AddPeer", peer: "P2"},
+// 				{evType: "ReceiveS", peer: "P1", height: 13},
+// 				{evType: "ReceiveS", peer: "P2", height: 15},
+// 				{evType: "BlockReq"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveNB", peer: "P1", height: 11},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P2", height: 12},
+// 				{evType: "ReceiveB", peer: "P2", height: 11},
+// 				{evType: "Process"},
+// 				{evType: "BlockReq"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P2", height: 13},
+// 				{evType: "Process"},
+// 				{evType: "ReceiveB", peer: "P2", height: 14},
+// 				{evType: "Process"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P2", height: 15},
+// 				{evType: "Process"},
+// 			},
+// 		},
+// 		{
+// 			name:   "termination on max peer height - two peers, remove one peer",
+// 			params: params,
+// 			msgs: []testEvent{
+// 				{evType: "AddPeer", peer: "P1"},
+// 				{evType: "AddPeer", peer: "P2"},
+// 				{evType: "ReceiveS", peer: "P1", height: 13},
+// 				{evType: "ReceiveS", peer: "P2", height: 15},
+// 				{evType: "BlockReq"},
+// 				{evType: "BlockReq"},
+// 				{evType: "RemovePeer", peer: "P1"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P2", height: 12},
+// 				{evType: "ReceiveB", peer: "P2", height: 11},
+// 				{evType: "Process"},
+// 				{evType: "BlockReq"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P2", height: 13},
+// 				{evType: "Process"},
+// 				{evType: "ReceiveB", peer: "P2", height: 14},
+// 				{evType: "Process"},
+// 				{evType: "BlockReq"},
+// 				{evType: "ReceiveB", peer: "P2", height: 15},
+// 				{evType: "Process"},
+// 			},
+// 		},
+// 	}
+
+// 	for _, tt := range tests {
+// 		tt := tt
+// 		t.Run(tt.name, func(t *testing.T) {
+// 			reactor := newTestReactor(params)
+// 			reactor.Start()
+// 			reactor.reporter = behaviour.NewMockReporter()
+// 			mockSwitch := &mockSwitchIo{switchedToConsensus: false}
+// 			reactor.io = mockSwitch
+// 			// time for go routines to start
+// 			time.Sleep(time.Millisecond)
+
+// 			for _, step := range tt.msgs {
+// 				switch step.evType {
+// 				case "AddPeer":
+// 					reactor.scheduler.send(bcAddNewPeer{peerID: p2p.ID(step.peer)})
+// 				case "RemovePeer":
+// 					reactor.scheduler.send(bcRemovePeer{peerID: p2p.ID(step.peer)})
+// 				case "ReceiveS":
+// 					reactor.scheduler.send(bcStatusResponse{
+// 						peerID: p2p.ID(step.peer),
+// 						height: step.height,
+// 						time:   time.Now(),
+// 					})
+// 				case "ReceiveB":
+// 					reactor.scheduler.send(bcBlockResponse{
+// 						peerID: p2p.ID(step.peer),
+// 						block:  refStore.LoadBlock(step.height),
+// 						size:   10,
+// 						time:   time.Now(),
+// 					})
+// 				case "ReceiveNB":
+// 					reactor.scheduler.send(bcNoBlockResponse{
+// 						peerID: p2p.ID(step.peer),
+// 						height: step.height,
+// 						time:   time.Now(),
+// 					})
+// 				case "BlockReq":
+// 					reactor.scheduler.send(rTrySchedule{time: time.Now()})
+// 				case "Process":
+// 					reactor.processor.send(rProcessBlock{})
+// 				}
+// 				// give time for messages to propagate between routines
+// 				time.Sleep(time.Millisecond)
+// 			}
+
+// 			// time for processor to finish and reactor to switch to consensus
+// 			time.Sleep(20 * time.Millisecond)
+// 			assert.True(t, mockSwitch.hasSwitchedToConsensus())
+// 			reactor.Stop()
+// 		})
+// 	}
+// }
+
+func TestReactorHelperMode(t *testing.T) {
+	var (
+		channelID = byte(0x40)
+	)
+
+	config := cfg.ResetTestRoot("blockchain_reactor_v2_test")
+	defer os.RemoveAll(config.RootDir)
+	genDoc, privVals := randGenesisDoc(config.ChainID(), 1, false, 30)
+
+	params := testReactorParams{
+		logger:      log.TestingLogger(),
+		genDoc:      genDoc,
+		privVals:    privVals,
+		startHeight: 20,
+		mockA:       true,
+	}
+
+	type testEvent struct {
+		peer  string
+		event interface{}
+	}
+
+	tests := []struct {
+		name   string
+		params testReactorParams
+		msgs   []testEvent
+	}{
+		{
+			name:   "status request",
+			params: params,
+			msgs: []testEvent{
+				{"P1", bcproto.StatusRequest{}},
+				{"P1", bcproto.BlockRequest{Height: 13}},
+				{"P1", bcproto.BlockRequest{Height: 20}},
+				{"P1", bcproto.BlockRequest{Height: 22}},
+			},
+		},
+	}
+
+	for _, tt := range tests {
+		tt := tt
+		t.Run(tt.name, func(t *testing.T) {
+			reactor := newTestReactor(params)
+			mockSwitch := &mockSwitchIo{switchedToConsensus: false}
+			reactor.io = mockSwitch
+			err := reactor.Start()
+			require.NoError(t, err)
+
+			for i := 0; i < len(tt.msgs); i++ {
+				step := tt.msgs[i]
+				switch ev := step.event.(type) {
+				case bcproto.StatusRequest:
+					old := mockSwitch.numStatusResponse
+
+					msgProto := new(bcproto.Message)
+					require.NoError(t, msgProto.Wrap(&ev))
+
+					msgBz, err := proto.Marshal(msgProto)
+					require.NoError(t, err)
+
+					reactor.Receive(channelID, mockPeer{id: p2p.NodeID(step.peer)}, msgBz)
+					assert.Equal(t, old+1, mockSwitch.numStatusResponse)
+				case bcproto.BlockRequest:
+					if ev.Height > params.startHeight {
+						old := mockSwitch.numNoBlockResponse
+
+						msgProto := new(bcproto.Message)
+						require.NoError(t, msgProto.Wrap(&ev))
+
+						msgBz, err := proto.Marshal(msgProto)
+						require.NoError(t, err)
+
+						reactor.Receive(channelID, mockPeer{id: p2p.NodeID(step.peer)}, msgBz)
+						assert.Equal(t, old+1, mockSwitch.numNoBlockResponse)
+					} else {
+						old := mockSwitch.numBlockResponse
+
+						msgProto := new(bcproto.Message)
+						require.NoError(t, msgProto.Wrap(&ev))
+
+						msgBz, err := proto.Marshal(msgProto)
+						require.NoError(t, err)
+
+						reactor.Receive(channelID, mockPeer{id: p2p.NodeID(step.peer)}, msgBz)
+						assert.Equal(t, old+1, mockSwitch.numBlockResponse)
+					}
+				}
+			}
+			err = reactor.Stop()
+			require.NoError(t, err)
+		})
+	}
+}
+
+func TestReactorSetSwitchNil(t *testing.T) {
+	config := cfg.ResetTestRoot("blockchain_reactor_v2_test")
+	defer os.RemoveAll(config.RootDir)
+	genDoc, privVals := randGenesisDoc(config.ChainID(), 1, false, 30)
+
+	reactor := newTestReactor(testReactorParams{
+		logger:   log.TestingLogger(),
+		genDoc:   genDoc,
+		privVals: privVals,
+	})
+	reactor.SetSwitch(nil)
+
+	assert.Nil(t, reactor.Switch)
+	assert.Nil(t, reactor.io)
+}
+
+//----------------------------------------------
+// utility funcs
+
+func makeTxs(height int64) (txs []types.Tx) {
+	for i := 0; i < 10; i++ {
+		txs = append(txs, types.Tx([]byte{byte(height), byte(i)}))
+	}
+	return txs
+}
+
+func makeBlock(height int64, state sm.State, lastCommit *types.Commit) *types.Block {
+	block, _ := state.MakeBlock(height, makeTxs(height), lastCommit, nil, state.Validators.GetProposer().Address)
+	return block
+}
+
+type testApp struct {
+	abci.BaseApplication
+}
+
+func randGenesisDoc(chainID string, numValidators int, randPower bool, minPower int64) (
+	*types.GenesisDoc, []types.PrivValidator) {
+	validators := make([]types.GenesisValidator, numValidators)
+	privValidators := make([]types.PrivValidator, numValidators)
+	for i := 0; i < numValidators; i++ {
+		val, privVal := types.RandValidator(randPower, minPower)
+		validators[i] = types.GenesisValidator{
+			PubKey: val.PubKey,
+			Power:  val.VotingPower,
+		}
+		privValidators[i] = privVal
+	}
+	sort.Sort(types.PrivValidatorsByAddress(privValidators))
+
+	return &types.GenesisDoc{
+		GenesisTime: tmtime.Now(),
+		ChainID:     chainID,
+		Validators:  validators,
+	}, privValidators
+}
+
+// Why are we importing the entire blockExecutor dependency graph here
+// when we have the facilities to
+func newReactorStore(
+	genDoc *types.GenesisDoc,
+	privVals []types.PrivValidator,
+	maxBlockHeight int64) (*store.BlockStore, sm.State, *sm.BlockExecutor) {
+	if len(privVals) != 1 {
+		panic("only support one validator")
+	}
+	app := &testApp{}
+	cc := proxy.NewLocalClientCreator(app)
+	proxyApp := proxy.NewAppConns(cc)
+	err := proxyApp.Start()
+	if err != nil {
+		panic(fmt.Errorf("error start app: %w", err))
+	}
+
+	stateDB := dbm.NewMemDB()
+	blockStore := store.NewBlockStore(dbm.NewMemDB())
+	stateStore := sm.NewStore(stateDB)
+	state, err := stateStore.LoadFromDBOrGenesisDoc(genDoc)
+	if err != nil {
+		panic(fmt.Errorf("error constructing state from genesis file: %w", err))
+	}
+
+	db := dbm.NewMemDB()
+	stateStore = sm.NewStore(db)
+	blockExec := sm.NewBlockExecutor(stateStore, log.TestingLogger(), proxyApp.Consensus(),
+		mock.Mempool{}, sm.EmptyEvidencePool{})
+	if err = stateStore.Save(state); err != nil {
+		panic(err)
+	}
+
+	// add blocks in
+	for blockHeight := int64(1); blockHeight <= maxBlockHeight; blockHeight++ {
+		lastCommit := types.NewCommit(blockHeight-1, 0, types.BlockID{}, nil)
+		if blockHeight > 1 {
+			lastBlockMeta := blockStore.LoadBlockMeta(blockHeight - 1)
+			lastBlock := blockStore.LoadBlock(blockHeight - 1)
+			vote, err := types.MakeVote(
+				lastBlock.Header.Height,
+				lastBlockMeta.BlockID,
+				state.Validators,
+				privVals[0],
+				lastBlock.Header.ChainID,
+				time.Now(),
+			)
+			if err != nil {
+				panic(err)
+			}
+			lastCommit = types.NewCommit(vote.Height, vote.Round,
+				lastBlockMeta.BlockID, []types.CommitSig{vote.CommitSig()})
+		}
+
+		thisBlock := makeBlock(blockHeight, state, lastCommit)
+
+		thisParts := thisBlock.MakePartSet(types.BlockPartSizeBytes)
+		blockID := types.BlockID{Hash: thisBlock.Hash(), PartSetHeader: thisParts.Header()}
+
+		state, _, err = blockExec.ApplyBlock(state, blockID, thisBlock)
+		if err != nil {
+			panic(fmt.Errorf("error apply block: %w", err))
+		}
+
+		blockStore.SaveBlock(thisBlock, thisParts, lastCommit)
+	}
+	return blockStore, state, blockExec
+}

blockchain/v2/scheduler.go

@@ -8,6 +8,7 @@ import (
 	"sort"
 	"time"
 
+	"github.com/tendermint/tendermint/p2p"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -25,7 +26,7 @@ func (e scFinishedEv) String() string {
 // send a blockRequest message
 type scBlockRequest struct {
 	priorityNormal
-	peerID types.NodeID
+	peerID p2p.NodeID
 	height int64
 }
 
@@ -36,7 +37,7 @@ func (e scBlockRequest) String() string {
 // a block has been received and validated by the scheduler
 type scBlockReceived struct {
 	priorityNormal
-	peerID types.NodeID
+	peerID p2p.NodeID
 	block  *types.Block
 }
 
@@ -47,7 +48,7 @@ func (e scBlockReceived) String() string {
 // scheduler detected a peer error
 type scPeerError struct {
 	priorityHigh
-	peerID types.NodeID
+	peerID p2p.NodeID
 	reason error
 }
 
@@ -58,7 +59,7 @@ func (e scPeerError) String() string {
 // scheduler removed a set of peers (timed out or slow peer)
 type scPeersPruned struct {
 	priorityHigh
-	peers []types.NodeID
+	peers []p2p.NodeID
 }
 
 func (e scPeersPruned) String() string {
@@ -125,7 +126,7 @@ func (e peerState) String() string {
 }
 
 type scPeer struct {
-	peerID types.NodeID
+	peerID p2p.NodeID
 
 	// initialized as New when peer is added, updated to Ready when statusUpdate is received,
 	// updated to Removed when peer is removed
@@ -142,7 +143,7 @@ func (p scPeer) String() string {
 		p.state, p.base, p.height, p.lastTouched, p.lastRate, p.peerID)
 }
 
-func newScPeer(peerID types.NodeID) *scPeer {
+func newScPeer(peerID p2p.NodeID) *scPeer {
 	return &scPeer{
 		peerID:      peerID,
 		state:       peerStateNew,
@@ -163,14 +164,14 @@ type scheduler struct {
 	height int64
 
 	// lastAdvance tracks the last time a block execution happened.
-	// syncTimeout is the maximum time the scheduler waits to advance in the block sync process before finishing.
+	// syncTimeout is the maximum time the scheduler waits to advance in the fast sync process before finishing.
 	// This covers the cases where there are no peers or all peers have a lower height.
 	lastAdvance time.Time
 	syncTimeout time.Duration
 
 	// a map of peerID to scheduler specific peer struct `scPeer` used to keep
 	// track of peer specific state
-	peers       map[types.NodeID]*scPeer
+	peers       map[p2p.NodeID]*scPeer
 	peerTimeout time.Duration // maximum response time from a peer otherwise prune
 	minRecvRate int64         // minimum receive rate from peer otherwise prune
 
@@ -182,13 +183,13 @@ type scheduler struct {
 	blockStates map[int64]blockState
 
 	// a map of heights to the peer we are waiting a response from
-	pendingBlocks map[int64]types.NodeID
+	pendingBlocks map[int64]p2p.NodeID
 
 	// the time at which a block was put in blockStatePending
 	pendingTime map[int64]time.Time
 
 	// a map of heights to the peers that put the block in blockStateReceived
-	receivedBlocks map[int64]types.NodeID
+	receivedBlocks map[int64]p2p.NodeID
 }
 
 func (sc scheduler) String() string {
@@ -203,10 +204,10 @@ func newScheduler(initHeight int64, startTime time.Time) *scheduler {
 		syncTimeout:    60 * time.Second,
 		height:         initHeight,
 		blockStates:    make(map[int64]blockState),
-		peers:          make(map[types.NodeID]*scPeer),
-		pendingBlocks:  make(map[int64]types.NodeID),
+		peers:          make(map[p2p.NodeID]*scPeer),
+		pendingBlocks:  make(map[int64]p2p.NodeID),
 		pendingTime:    make(map[int64]time.Time),
-		receivedBlocks: make(map[int64]types.NodeID),
+		receivedBlocks: make(map[int64]p2p.NodeID),
 		targetPending:  10,               // TODO - pass as param
 		peerTimeout:    15 * time.Second, // TODO - pass as param
 		minRecvRate:    0,                // int64(7680), TODO - pass as param
@@ -215,14 +216,14 @@ func newScheduler(initHeight int64, startTime time.Time) *scheduler {
 	return &sc
 }
 
-func (sc *scheduler) ensurePeer(peerID types.NodeID) *scPeer {
+func (sc *scheduler) ensurePeer(peerID p2p.NodeID) *scPeer {
 	if _, ok := sc.peers[peerID]; !ok {
 		sc.peers[peerID] = newScPeer(peerID)
 	}
 	return sc.peers[peerID]
 }
 
-func (sc *scheduler) touchPeer(peerID types.NodeID, time time.Time) error {
+func (sc *scheduler) touchPeer(peerID p2p.NodeID, time time.Time) error {
 	peer, ok := sc.peers[peerID]
 	if !ok {
 		return fmt.Errorf("couldn't find peer %s", peerID)
@@ -237,7 +238,7 @@ func (sc *scheduler) touchPeer(peerID types.NodeID, time time.Time) error {
 	return nil
 }
 
-func (sc *scheduler) removePeer(peerID types.NodeID) {
+func (sc *scheduler) removePeer(peerID p2p.NodeID) {
 	peer, ok := sc.peers[peerID]
 	if !ok {
 		return
@@ -297,7 +298,7 @@ func (sc *scheduler) addNewBlocks() {
 	}
 }
 
-func (sc *scheduler) setPeerRange(peerID types.NodeID, base int64, height int64) error {
+func (sc *scheduler) setPeerRange(peerID p2p.NodeID, base int64, height int64) error {
 	peer := sc.ensurePeer(peerID)
 
 	if peer.state == peerStateRemoved {
@@ -332,8 +333,8 @@ func (sc *scheduler) getStateAtHeight(height int64) blockState {
 	}
 }
 
-func (sc *scheduler) getPeersWithHeight(height int64) []types.NodeID {
-	peers := make([]types.NodeID, 0)
+func (sc *scheduler) getPeersWithHeight(height int64) []p2p.NodeID {
+	peers := make([]p2p.NodeID, 0)
 	for _, peer := range sc.peers {
 		if peer.state != peerStateReady {
 			continue
@@ -345,8 +346,8 @@ func (sc *scheduler) getPeersWithHeight(height int64) []types.NodeID {
 	return peers
 }
 
-func (sc *scheduler) prunablePeers(peerTimout time.Duration, minRecvRate int64, now time.Time) []types.NodeID {
-	prunable := make([]types.NodeID, 0)
+func (sc *scheduler) prunablePeers(peerTimout time.Duration, minRecvRate int64, now time.Time) []p2p.NodeID {
+	prunable := make([]p2p.NodeID, 0)
 	for peerID, peer := range sc.peers {
 		if peer.state != peerStateReady {
 			continue
@@ -365,7 +366,7 @@ func (sc *scheduler) setStateAtHeight(height int64, state blockState) {
 }
 
 // CONTRACT: peer exists and in Ready state.
-func (sc *scheduler) markReceived(peerID types.NodeID, height int64, size int64, now time.Time) error {
+func (sc *scheduler) markReceived(peerID p2p.NodeID, height int64, size int64, now time.Time) error {
 	peer := sc.peers[peerID]
 
 	if state := sc.getStateAtHeight(height); state != blockStatePending || sc.pendingBlocks[height] != peerID {
@@ -389,7 +390,7 @@ func (sc *scheduler) markReceived(peerID types.NodeID, height int64, size int64,
 	return nil
 }
 
-func (sc *scheduler) markPending(peerID types.NodeID, height int64, time time.Time) error {
+func (sc *scheduler) markPending(peerID p2p.NodeID, height int64, time time.Time) error {
 	state := sc.getStateAtHeight(height)
 	if state != blockStateNew {
 		return fmt.Errorf("block %d should be in blockStateNew but is %s", height, state)
@@ -471,7 +472,7 @@ func (sc *scheduler) nextHeightToSchedule() int64 {
 	return min
 }
 
-func (sc *scheduler) pendingFrom(peerID types.NodeID) []int64 {
+func (sc *scheduler) pendingFrom(peerID p2p.NodeID) []int64 {
 	var heights []int64
 	for height, pendingPeerID := range sc.pendingBlocks {
 		if pendingPeerID == peerID {
@@ -481,7 +482,7 @@ func (sc *scheduler) pendingFrom(peerID types.NodeID) []int64 {
 	return heights
 }
 
-func (sc *scheduler) selectPeer(height int64) (types.NodeID, error) {
+func (sc *scheduler) selectPeer(height int64) (p2p.NodeID, error) {
 	peers := sc.getPeersWithHeight(height)
 	if len(peers) == 0 {
 		return "", fmt.Errorf("cannot find peer for height %d", height)
@@ -489,7 +490,7 @@ func (sc *scheduler) selectPeer(height int64) (types.NodeID, error) {
 
 	// create a map from number of pending requests to a list
 	// of peers having that number of pending requests.
-	pendingFrom := make(map[int][]types.NodeID)
+	pendingFrom := make(map[int][]p2p.NodeID)
 	for _, peerID := range peers {
 		numPending := len(sc.pendingFrom(peerID))
 		pendingFrom[numPending] = append(pendingFrom[numPending], peerID)
@@ -508,7 +509,7 @@ func (sc *scheduler) selectPeer(height int64) (types.NodeID, error) {
 }
 
 // PeerByID is a list of peers sorted by peerID.
-type PeerByID []types.NodeID
+type PeerByID []p2p.NodeID
 
 func (peers PeerByID) Len() int {
 	return len(peers)

blockchain/v2/scheduler_test.go

@@ -10,7 +10,8 @@ import (
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 
-	"github.com/tendermint/tendermint/internal/state"
+	"github.com/tendermint/tendermint/p2p"
+	"github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/types"
 )
 
@@ -19,9 +20,9 @@ type scTestParams struct {
 	initHeight    int64
 	height        int64
 	allB          []int64
-	pending       map[int64]types.NodeID
+	pending       map[int64]p2p.NodeID
 	pendingTime   map[int64]time.Time
-	received      map[int64]types.NodeID
+	received      map[int64]p2p.NodeID
 	peerTimeout   time.Duration
 	minRecvRate   int64
 	targetPending int
@@ -40,7 +41,7 @@ func verifyScheduler(sc *scheduler) {
 }
 
 func newTestScheduler(params scTestParams) *scheduler {
-	peers := make(map[types.NodeID]*scPeer)
+	peers := make(map[p2p.NodeID]*scPeer)
 	var maxHeight int64
 
 	initHeight := params.initHeight
@@ -53,8 +54,8 @@ func newTestScheduler(params scTestParams) *scheduler {
 	}
 
 	for id, peer := range params.peers {
-		peer.peerID = types.NodeID(id)
-		peers[types.NodeID(id)] = peer
+		peer.peerID = p2p.NodeID(id)
+		peers[p2p.NodeID(id)] = peer
 		if maxHeight < peer.height {
 			maxHeight = peer.height
 		}
@@ -121,7 +122,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "one ready peer",
 			sc: scheduler{
 				height: 3,
-				peers:  map[types.NodeID]*scPeer{"P1": {height: 6, state: peerStateReady}},
+				peers:  map[p2p.NodeID]*scPeer{"P1": {height: 6, state: peerStateReady}},
 			},
 			wantMax: 6,
 		},
@@ -129,7 +130,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "ready and removed peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[types.NodeID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {height: 4, state: peerStateReady},
 					"P2": {height: 10, state: peerStateRemoved}},
 			},
@@ -139,7 +140,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "removed peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[types.NodeID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {height: 4, state: peerStateRemoved},
 					"P2": {height: 10, state: peerStateRemoved}},
 			},
@@ -149,7 +150,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "new peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[types.NodeID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {base: -1, height: -1, state: peerStateNew},
 					"P2": {base: -1, height: -1, state: peerStateNew}},
 			},
@@ -159,7 +160,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "mixed peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[types.NodeID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {height: -1, state: peerStateNew},
 					"P2": {height: 10, state: peerStateReady},
 					"P3": {height: 20, state: peerStateRemoved},
@@ -186,7 +187,7 @@ func TestScMaxHeights(t *testing.T) {
 func TestScEnsurePeer(t *testing.T) {
 
 	type args struct {
-		peerID types.NodeID
+		peerID p2p.NodeID
 	}
 	tests := []struct {
 		name       string
@@ -243,7 +244,7 @@ func TestScTouchPeer(t *testing.T) {
 	now := time.Now()
 
 	type args struct {
-		peerID types.NodeID
+		peerID p2p.NodeID
 		time   time.Time
 	}
 
@@ -315,13 +316,13 @@ func TestScPrunablePeers(t *testing.T) {
 		name       string
 		fields     scTestParams
 		args       args
-		wantResult []types.NodeID
+		wantResult []p2p.NodeID
 	}{
 		{
 			name:       "no peers",
 			fields:     scTestParams{peers: map[string]*scPeer{}},
 			args:       args{threshold: time.Second, time: now.Add(time.Second + time.Millisecond), minSpeed: 100},
-			wantResult: []types.NodeID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "mixed peers",
@@ -340,7 +341,7 @@ func TestScPrunablePeers(t *testing.T) {
 				"P6": {state: peerStateReady, lastTouched: now.Add(time.Second), lastRate: 90},
 			}},
 			args:       args{threshold: time.Second, time: now.Add(time.Second + time.Millisecond), minSpeed: 100},
-			wantResult: []types.NodeID{"P4", "P5", "P6"},
+			wantResult: []p2p.NodeID{"P4", "P5", "P6"},
 		},
 	}
 
@@ -360,7 +361,7 @@ func TestScPrunablePeers(t *testing.T) {
 func TestScRemovePeer(t *testing.T) {
 
 	type args struct {
-		peerID types.NodeID
+		peerID p2p.NodeID
 	}
 	tests := []struct {
 		name       string
@@ -423,13 +424,13 @@ func TestScRemovePeer(t *testing.T) {
 			fields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 				allB:    []int64{1, 2, 3},
-				pending: map[int64]types.NodeID{1: "P1"},
+				pending: map[int64]p2p.NodeID{1: "P1"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 3, state: peerStateRemoved}},
 				allB:    []int64{},
-				pending: map[int64]types.NodeID{},
+				pending: map[int64]p2p.NodeID{},
 			},
 		},
 		{
@@ -437,13 +438,13 @@ func TestScRemovePeer(t *testing.T) {
 			fields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 				allB:     []int64{1, 2, 3},
-				received: map[int64]types.NodeID{1: "P1"},
+				received: map[int64]p2p.NodeID{1: "P1"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 3, state: peerStateRemoved}},
 				allB:     []int64{},
-				received: map[int64]types.NodeID{},
+				received: map[int64]p2p.NodeID{},
 			},
 		},
 		{
@@ -451,15 +452,15 @@ func TestScRemovePeer(t *testing.T) {
 			fields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:     []int64{1, 2, 3, 4},
-				pending:  map[int64]types.NodeID{1: "P1", 3: "P1"},
-				received: map[int64]types.NodeID{2: "P1", 4: "P1"},
+				pending:  map[int64]p2p.NodeID{1: "P1", 3: "P1"},
+				received: map[int64]p2p.NodeID{2: "P1", 4: "P1"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 4, state: peerStateRemoved}},
 				allB:     []int64{},
-				pending:  map[int64]types.NodeID{},
-				received: map[int64]types.NodeID{},
+				pending:  map[int64]p2p.NodeID{},
+				received: map[int64]p2p.NodeID{},
 			},
 		},
 		{
@@ -470,8 +471,8 @@ func TestScRemovePeer(t *testing.T) {
 					"P2": {height: 6, state: peerStateReady},
 				},
 				allB:     []int64{1, 2, 3, 4, 5, 6},
-				pending:  map[int64]types.NodeID{1: "P1", 3: "P2", 6: "P1"},
-				received: map[int64]types.NodeID{2: "P1", 4: "P2", 5: "P2"},
+				pending:  map[int64]p2p.NodeID{1: "P1", 3: "P2", 6: "P1"},
+				received: map[int64]p2p.NodeID{2: "P1", 4: "P2", 5: "P2"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
@@ -480,8 +481,8 @@ func TestScRemovePeer(t *testing.T) {
 					"P2": {height: 6, state: peerStateReady},
 				},
 				allB:     []int64{1, 2, 3, 4, 5, 6},
-				pending:  map[int64]types.NodeID{3: "P2"},
-				received: map[int64]types.NodeID{4: "P2", 5: "P2"},
+				pending:  map[int64]p2p.NodeID{3: "P2"},
+				received: map[int64]p2p.NodeID{4: "P2", 5: "P2"},
 			},
 		},
 	}
@@ -500,7 +501,7 @@ func TestScRemovePeer(t *testing.T) {
 func TestScSetPeerRange(t *testing.T) {
 
 	type args struct {
-		peerID types.NodeID
+		peerID p2p.NodeID
 		base   int64
 		height int64
 	}
@@ -621,25 +622,25 @@ func TestScGetPeersWithHeight(t *testing.T) {
 		name       string
 		fields     scTestParams
 		args       args
-		wantResult []types.NodeID
+		wantResult []p2p.NodeID
 	}{
 		{
 			name:       "no peers",
 			fields:     scTestParams{peers: map[string]*scPeer{}},
 			args:       args{height: 10},
-			wantResult: []types.NodeID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name:       "only new peers",
 			fields:     scTestParams{peers: map[string]*scPeer{"P1": {height: -1, state: peerStateNew}}},
 			args:       args{height: 10},
-			wantResult: []types.NodeID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name:       "only Removed peers",
 			fields:     scTestParams{peers: map[string]*scPeer{"P1": {height: 4, state: peerStateRemoved}}},
 			args:       args{height: 2},
-			wantResult: []types.NodeID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "one Ready shorter peer",
@@ -648,7 +649,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:  []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 5},
-			wantResult: []types.NodeID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "one Ready equal peer",
@@ -657,7 +658,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:  []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []types.NodeID{"P1"},
+			wantResult: []p2p.NodeID{"P1"},
 		},
 		{
 			name: "one Ready higher peer",
@@ -667,7 +668,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:          []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []types.NodeID{"P1"},
+			wantResult: []p2p.NodeID{"P1"},
 		},
 		{
 			name: "one Ready higher peer at base",
@@ -677,7 +678,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:          []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []types.NodeID{"P1"},
+			wantResult: []p2p.NodeID{"P1"},
 		},
 		{
 			name: "one Ready higher peer with higher base",
@@ -687,7 +688,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:          []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []types.NodeID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "multiple mixed peers",
@@ -702,7 +703,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB: []int64{8, 9, 10, 11},
 			},
 			args:       args{height: 8},
-			wantResult: []types.NodeID{"P2", "P5"},
+			wantResult: []p2p.NodeID{"P2", "P5"},
 		},
 	}
 
@@ -724,7 +725,7 @@ func TestScMarkPending(t *testing.T) {
 	now := time.Now()
 
 	type args struct {
-		peerID types.NodeID
+		peerID p2p.NodeID
 		height int64
 		tm     time.Time
 	}
@@ -820,14 +821,14 @@ func TestScMarkPending(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]types.NodeID{1: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1"},
 				pendingTime: map[int64]time.Time{1: now},
 			},
 			args: args{peerID: "P1", height: 2, tm: now.Add(time.Millisecond)},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]types.NodeID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now.Add(time.Millisecond)},
 			},
 		},
@@ -850,7 +851,7 @@ func TestScMarkReceived(t *testing.T) {
 	now := time.Now()
 
 	type args struct {
-		peerID types.NodeID
+		peerID p2p.NodeID
 		height int64
 		size   int64
 		tm     time.Time
@@ -890,7 +891,7 @@ func TestScMarkReceived(t *testing.T) {
 					"P2": {height: 4, state: peerStateReady},
 				},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]types.NodeID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
+				pending: map[int64]p2p.NodeID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now},
 			wantFields: scTestParams{
@@ -899,7 +900,7 @@ func TestScMarkReceived(t *testing.T) {
 					"P2": {height: 4, state: peerStateReady},
 				},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]types.NodeID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
+				pending: map[int64]p2p.NodeID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
 			},
 			wantErr: true,
 		},
@@ -908,13 +909,13 @@ func TestScMarkReceived(t *testing.T) {
 			fields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]types.NodeID{},
+				pending: map[int64]p2p.NodeID{},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now},
 			wantFields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]types.NodeID{},
+				pending: map[int64]p2p.NodeID{},
 			},
 			wantErr: true,
 		},
@@ -923,14 +924,14 @@ func TestScMarkReceived(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]types.NodeID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now.Add(time.Second)},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]types.NodeID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now.Add(time.Second)},
 			},
 			wantErr: true,
@@ -940,16 +941,16 @@ func TestScMarkReceived(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]types.NodeID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now.Add(time.Millisecond)},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]types.NodeID{1: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1"},
 				pendingTime: map[int64]time.Time{1: now},
-				received:    map[int64]types.NodeID{2: "P1"},
+				received:    map[int64]p2p.NodeID{2: "P1"},
 			},
 		},
 	}
@@ -990,7 +991,7 @@ func TestScMarkProcessed(t *testing.T) {
 				height:        2,
 				peers:         map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:          []int64{2},
-				pending:       map[int64]types.NodeID{2: "P1"},
+				pending:       map[int64]p2p.NodeID{2: "P1"},
 				pendingTime:   map[int64]time.Time{2: now},
 				targetPending: 1,
 			},
@@ -1008,15 +1009,15 @@ func TestScMarkProcessed(t *testing.T) {
 				height:      1,
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]types.NodeID{2: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1"},
 				pendingTime: map[int64]time.Time{2: now},
-				received:    map[int64]types.NodeID{1: "P1"}},
+				received:    map[int64]p2p.NodeID{1: "P1"}},
 			args: args{height: 1},
 			wantFields: scTestParams{
 				height:      2,
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{2},
-				pending:     map[int64]types.NodeID{2: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1"},
 				pendingTime: map[int64]time.Time{2: now}},
 		},
 	}
@@ -1100,7 +1101,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]types.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now, 3: now, 4: now},
 			},
 			wantResult: false,
@@ -1110,7 +1111,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 			fields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:     []int64{1, 2, 3, 4},
-				received: map[int64]types.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				received: map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 			},
 			wantResult: false,
 		},
@@ -1121,7 +1122,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 				peers: map[string]*scPeer{
 					"P1": {height: 4, state: peerStateReady}},
 				allB:     []int64{4},
-				received: map[int64]types.NodeID{4: "P1"},
+				received: map[int64]p2p.NodeID{4: "P1"},
 			},
 			wantResult: true,
 		},
@@ -1130,7 +1131,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]types.NodeID{2: "P1", 4: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1", 4: "P1"},
 				pendingTime: map[int64]time.Time{2: now, 4: now},
 			},
 			wantResult: false,
@@ -1178,7 +1179,7 @@ func TestScNextHeightToSchedule(t *testing.T) {
 				initHeight:  1,
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]types.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now, 3: now, 4: now},
 			},
 			wantHeight: -1,
@@ -1189,7 +1190,7 @@ func TestScNextHeightToSchedule(t *testing.T) {
 				initHeight: 1,
 				peers:      map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:       []int64{1, 2, 3, 4},
-				received:   map[int64]types.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				received:   map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 			},
 			wantHeight: -1,
 		},
@@ -1208,7 +1209,7 @@ func TestScNextHeightToSchedule(t *testing.T) {
 				initHeight:  1,
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]types.NodeID{2: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1"},
 				pendingTime: map[int64]time.Time{2: now},
 			},
 			wantHeight: 1,
@@ -1238,7 +1239,7 @@ func TestScSelectPeer(t *testing.T) {
 		name       string
 		fields     scTestParams
 		args       args
-		wantResult types.NodeID
+		wantResult p2p.NodeID
 		wantError  bool
 	}{
 		{
@@ -1306,7 +1307,7 @@ func TestScSelectPeer(t *testing.T) {
 					"P1": {height: 8, state: peerStateReady},
 					"P2": {height: 9, state: peerStateReady}},
 				allB: []int64{4, 5, 6, 7, 8, 9},
-				pending: map[int64]types.NodeID{
+				pending: map[int64]p2p.NodeID{
 					4: "P1", 6: "P1",
 					5: "P2",
 				},
@@ -1322,7 +1323,7 @@ func TestScSelectPeer(t *testing.T) {
 					"P1": {height: 15, state: peerStateReady},
 					"P3": {height: 15, state: peerStateReady}},
 				allB: []int64{1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
-				pending: map[int64]types.NodeID{
+				pending: map[int64]p2p.NodeID{
 					1: "P1", 2: "P1",
 					3: "P3", 4: "P3",
 					5: "P2", 6: "P2",
@@ -1391,7 +1392,7 @@ func TestScHandleBlockResponse(t *testing.T) {
 	now := time.Now()
 	block6FromP1 := bcBlockResponse{
 		time:   now.Add(time.Millisecond),
-		peerID: types.NodeID("P1"),
+		peerID: p2p.NodeID("P1"),
 		size:   100,
 		block:  makeScBlock(6),
 	}
@@ -1432,7 +1433,7 @@ func TestScHandleBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P2"},
+				pending:     map[int64]p2p.NodeID{6: "P2"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: block6FromP1},
@@ -1443,7 +1444,7 @@ func TestScHandleBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now.Add(time.Second)},
 			},
 			args:      args{event: block6FromP1},
@@ -1454,7 +1455,7 @@ func TestScHandleBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: block6FromP1},
@@ -1476,7 +1477,7 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 	now := time.Now()
 	noBlock6FromP1 := bcNoBlockResponse{
 		time:   now.Add(time.Millisecond),
-		peerID: types.NodeID("P1"),
+		peerID: p2p.NodeID("P1"),
 		height: 6,
 	}
 
@@ -1512,14 +1513,14 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P2"},
+				pending:     map[int64]p2p.NodeID{6: "P2"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			wantEvent: noOpEvent{},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P2"},
+				pending:     map[int64]p2p.NodeID{6: "P2"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 		},
@@ -1528,7 +1529,7 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			wantEvent:  scPeerError{peerID: "P1", reason: fmt.Errorf("some error")},
@@ -1551,7 +1552,7 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 func TestScHandleBlockProcessed(t *testing.T) {
 	now := time.Now()
 	processed6FromP1 := pcBlockProcessed{
-		peerID: types.NodeID("P1"),
+		peerID: p2p.NodeID("P1"),
 		height: 6,
 	}
 
@@ -1578,7 +1579,7 @@ func TestScHandleBlockProcessed(t *testing.T) {
 				initHeight:  6,
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: processed6FromP1},
@@ -1590,7 +1591,7 @@ func TestScHandleBlockProcessed(t *testing.T) {
 				initHeight: 6,
 				peers:      map[string]*scPeer{"P1": {height: 7, state: peerStateReady}},
 				allB:       []int64{6, 7},
-				received:   map[int64]types.NodeID{6: "P1", 7: "P1"},
+				received:   map[int64]p2p.NodeID{6: "P1", 7: "P1"},
 			},
 			args:      args{event: processed6FromP1},
 			wantEvent: scFinishedEv{},
@@ -1601,8 +1602,8 @@ func TestScHandleBlockProcessed(t *testing.T) {
 				initHeight: 6,
 				peers:      map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:       []int64{6, 7, 8},
-				pending:    map[int64]types.NodeID{7: "P1", 8: "P1"},
-				received:   map[int64]types.NodeID{6: "P1"},
+				pending:    map[int64]p2p.NodeID{7: "P1", 8: "P1"},
+				received:   map[int64]p2p.NodeID{6: "P1"},
 			},
 			args:      args{event: processed6FromP1},
 			wantEvent: noOpEvent{},
@@ -1645,7 +1646,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight:  6,
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 10, firstPeerID: "P1", secondPeerID: "P1"}},
@@ -1657,7 +1658,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight:  6,
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}, "P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{6, 7, 8},
-				pending:     map[int64]types.NodeID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 10, firstPeerID: "P1", secondPeerID: "P1"}},
@@ -1669,7 +1670,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight: 6,
 				peers:      map[string]*scPeer{"P1": {height: 7, state: peerStateReady}},
 				allB:       []int64{6, 7},
-				received:   map[int64]types.NodeID{6: "P1", 7: "P1"},
+				received:   map[int64]p2p.NodeID{6: "P1", 7: "P1"},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 7, firstPeerID: "P1", secondPeerID: "P1"}},
 			wantEvent: scFinishedEv{},
@@ -1680,8 +1681,8 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight: 5,
 				peers:      map[string]*scPeer{"P1": {height: 8, state: peerStateReady}, "P2": {height: 8, state: peerStateReady}},
 				allB:       []int64{5, 6, 7, 8},
-				pending:    map[int64]types.NodeID{7: "P1", 8: "P1"},
-				received:   map[int64]types.NodeID{5: "P1", 6: "P1"},
+				pending:    map[int64]p2p.NodeID{7: "P1", 8: "P1"},
+				received:   map[int64]p2p.NodeID{5: "P1", 6: "P1"},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 5, firstPeerID: "P1", secondPeerID: "P1"}},
 			wantEvent: noOpEvent{},
@@ -1696,8 +1697,8 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 					"P3": {height: 8, state: peerStateReady},
 				},
 				allB:     []int64{5, 6, 7, 8},
-				pending:  map[int64]types.NodeID{7: "P1", 8: "P1"},
-				received: map[int64]types.NodeID{5: "P1", 6: "P1"},
+				pending:  map[int64]p2p.NodeID{7: "P1", 8: "P1"},
+				received: map[int64]p2p.NodeID{5: "P1", 6: "P1"},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 5, firstPeerID: "P1", secondPeerID: "P2"}},
 			wantEvent: noOpEvent{},
@@ -1716,7 +1717,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 
 func TestScHandleAddNewPeer(t *testing.T) {
 	addP1 := bcAddNewPeer{
-		peerID: types.NodeID("P1"),
+		peerID: p2p.NodeID("P1"),
 	}
 	type args struct {
 		event bcAddNewPeer
@@ -1827,7 +1828,7 @@ func TestScHandleTryPrunePeer(t *testing.T) {
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7},
 				peerTimeout: time.Second},
 			args:      args{event: pruneEv},
-			wantEvent: scPeersPruned{peers: []types.NodeID{"P4", "P5", "P6"}},
+			wantEvent: scPeersPruned{peers: []p2p.NodeID{"P4", "P5", "P6"}},
 		},
 		{
 			name: "mixed peers, finish after pruning",
@@ -1925,7 +1926,7 @@ func TestScHandleTrySchedule(t *testing.T) {
 					"P1": {height: 4, state: peerStateReady},
 					"P2": {height: 5, state: peerStateReady}},
 				allB: []int64{1, 2, 3, 4, 5},
-				pending: map[int64]types.NodeID{
+				pending: map[int64]p2p.NodeID{
 					1: "P1", 2: "P1",
 					3: "P2",
 				},
@@ -1943,7 +1944,7 @@ func TestScHandleTrySchedule(t *testing.T) {
 					"P1": {height: 8, state: peerStateReady},
 					"P3": {height: 8, state: peerStateReady}},
 				allB: []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending: map[int64]types.NodeID{
+				pending: map[int64]p2p.NodeID{
 					1: "P1", 2: "P1",
 					3: "P3", 4: "P3",
 					5: "P2", 6: "P2",
@@ -2105,7 +2106,7 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]types.NodeID{1: "P1"},
+						pending:     map[int64]p2p.NodeID{1: "P1"},
 						pendingTime: map[int64]time.Time{1: tick[1]},
 						height:      1,
 					},
@@ -2117,7 +2118,7 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]types.NodeID{1: "P1", 2: "P1"},
+						pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 						pendingTime: map[int64]time.Time{1: tick[1], 2: tick[2]},
 						height:      1,
 					},
@@ -2129,7 +2130,7 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]types.NodeID{1: "P1", 2: "P1", 3: "P1"},
+						pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1"},
 						pendingTime: map[int64]time.Time{1: tick[1], 2: tick[2], 3: tick[3]},
 						height:      1,
 					},
@@ -2141,9 +2142,9 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[4]}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]types.NodeID{2: "P1", 3: "P1"},
+						pending:     map[int64]p2p.NodeID{2: "P1", 3: "P1"},
 						pendingTime: map[int64]time.Time{2: tick[2], 3: tick[3]},
-						received:    map[int64]types.NodeID{1: "P1"},
+						received:    map[int64]p2p.NodeID{1: "P1"},
 						height:      1,
 					},
 				},
@@ -2154,9 +2155,9 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[5]}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]types.NodeID{3: "P1"},
+						pending:     map[int64]p2p.NodeID{3: "P1"},
 						pendingTime: map[int64]time.Time{3: tick[3]},
-						received:    map[int64]types.NodeID{1: "P1", 2: "P1"},
+						received:    map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 						height:      1,
 					},
 				},
@@ -2167,29 +2168,29 @@ func TestScHandle(t *testing.T) {
 						startTime: now,
 						peers:     map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:      []int64{1, 2, 3},
-						received:  map[int64]types.NodeID{1: "P1", 2: "P1", 3: "P1"},
+						received:  map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1"},
 						height:    1,
 					},
 				},
 				{ // processed block 1
-					args:      args{event: pcBlockProcessed{peerID: types.NodeID("P1"), height: 1}},
+					args:      args{event: pcBlockProcessed{peerID: p2p.NodeID("P1"), height: 1}},
 					wantEvent: noOpEvent{},
 					wantSc: &scTestParams{
 						startTime: now,
 						peers:     map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:      []int64{2, 3},
-						received:  map[int64]types.NodeID{2: "P1", 3: "P1"},
+						received:  map[int64]p2p.NodeID{2: "P1", 3: "P1"},
 						height:    2,
 					},
 				},
 				{ // processed block 2
-					args:      args{event: pcBlockProcessed{peerID: types.NodeID("P1"), height: 2}},
+					args:      args{event: pcBlockProcessed{peerID: p2p.NodeID("P1"), height: 2}},
 					wantEvent: scFinishedEv{},
 					wantSc: &scTestParams{
 						startTime: now,
 						peers:     map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:      []int64{3},
-						received:  map[int64]types.NodeID{3: "P1"},
+						received:  map[int64]p2p.NodeID{3: "P1"},
 						height:    3,
 					},
 				},
@@ -2205,7 +2206,7 @@ func TestScHandle(t *testing.T) {
 							"P1": {height: 4, state: peerStateReady, lastTouched: tick[6]},
 							"P2": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:     []int64{1, 2, 3, 4},
-						received: map[int64]types.NodeID{1: "P1", 2: "P1", 3: "P1"},
+						received: map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1"},
 						height:   1,
 					},
 					args:      args{event: pcBlockVerificationFailure{height: 1, firstPeerID: "P1", secondPeerID: "P1"}},
@@ -2216,7 +2217,7 @@ func TestScHandle(t *testing.T) {
 							"P1": {height: 4, state: peerStateRemoved, lastTouched: tick[6]},
 							"P2": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:     []int64{1, 2, 3},
-						received: map[int64]types.NodeID{},
+						received: map[int64]p2p.NodeID{},
 						height:   1,
 					},
 				},
@@ -2229,7 +2230,7 @@ func TestScHandle(t *testing.T) {
 		t.Run(tt.name, func(t *testing.T) {
 			var sc *scheduler
 			for i, step := range tt.steps {
-				// First step must always initialize the currentState as state.
+				// First step must always initialise the currentState as state.
 				if step.currentSc != nil {
 					sc = newTestScheduler(*step.currentSc)
 				}