docs: master → docs-staging (#5990)

* Makefile: always pull image in proto-gen-docker. (#5953)

The `proto-gen-docker` target didn't pull an updated Docker image, and would use a local image if present which could be outdated and produce wrong results.

* test: fix TestPEXReactorRunning data race (#5955)

Fixes #5941.

Not entirely sure that this will fix the problem (couldn't reproduce), but in any case this is an artifact of a hack in the P2P transport refactor to make it work with the legacy P2P stack, and will be removed when the refactor is done anyway.

* test/fuzz: move fuzz tests into this repo (#5918)

Co-authored-by: Emmanuel T Odeke <emmanuel@orijtech.com>

Closes #5907

- add init-corpus to blockchain reactor
- remove validator-set FromBytes test
now that we have proto, we don't need to test it! bye amino
- simplify mempool test
do we want to test remote ABCI app?
- do not recreate mux on every crash in jsonrpc test
- update p2p pex reactor test
- remove p2p/listener test
the API has changed + I did not understand what it's tested anyway
- update secretconnection test
- add readme and makefile
- list inputs in readme
- add nightly workflow
- remove blockchain fuzz test
EncodeMsg / DecodeMsg no longer exist

* docker: dont login when in PR (#5961)

* docker: release Linux/ARM64 image (#5925)

Co-authored-by: Marko <marbar3778@yahoo.com>

* p2p: make PeerManager.DialNext() and EvictNext() block (#5947)

See #5936 and #5938 for background.

The plan was initially to have `DialNext()` and `EvictNext()` return a channel. However, implementing this became unnecessarily complicated and error-prone. As an example, the channel would be both consumed and populated (via method calls) by the same driving method (e.g. `Router.dialPeers()`) which could easily cause deadlocks where a method call blocked while sending on the channel that the caller itself was responsible for consuming (but couldn't since it was busy making the method call). It would also require a set of goroutines in the peer manager that would interact with the goroutines in the router in non-obvious ways, and fully populating the channel on startup could cause deadlocks with other startup tasks. Several issues like these made the solution hard to reason about.

I therefore simply made `DialNext()` and `EvictNext()` block until the next peer was available, using internal triggers to wake these methods up in a non-blocking fashion when any relevant state changes occurred. This proved much simpler to reason about, since there are no goroutines in the peer manager (except for trivial retry timers), nor any blocking channel sends, and it instead relies entirely on the existing goroutine structure of the router for concurrency. This also happens to be the same pattern used by the `Transport.Accept()` API, following Go stdlib conventions, so all router goroutines end up using a consistent pattern as well.

* libs/log: format []byte as hexidecimal string (uppercased) (#5960)

Closes: #5806 

Co-authored-by: Lanie Hei <heixx011@umn.edu>

* docs: log level docs (#5945)

## Description

add section on configuring log levels

Closes: #XXX

* .github: fix fuzz-nightly job (#5965)

outputs is a property of the job, not an individual step.

* e2e: add control over the log level of nodes (#5958)

* mempool: fix reactor tests (#5967)

## Description

Update the faux router to either drop channel errors or handle them based on an argument. This prevents deadlocks in tests where we try to send an error on the mempool channel but there is no reader.

Closes: #5956

* p2p: improve peerStore prototype (#5954)

This improves the `peerStore` prototype by e.g.:

* Using a database with Protobuf for persistence, but also keeping full peer set in memory for performance.
* Simplifying the API, by taking/returning struct copies for safety, and removing errors for in-memory operations.
* Caching the ranked peer set, as a temporary solution until a better data structure is implemented.
* Adding `PeerManagerOptions.MaxPeers` and pruning the peer store (based on rank) when it's full.
* Rewriting `PeerAddress` to be independent of `url.URL`, normalizing it and tightening semantics.

* p2p: simplify PeerManager upgrade logic (#5962)

Follow-up from #5947, branched off of #5954.

This simplifies the upgrade logic by adding explicit eviction requests, which can also be useful for other use-cases (e.g. if we need to ban a peer that's misbehaving). Changes:

* Add `evict` map which queues up peers to explicitly evict.
* `upgrading` now only tracks peers that we're upgrading via dialing (`DialNext` → `Dialed`/`DialFailed`).
* `Dialed` will unmark `upgrading`, and queue `evict` if still beyond capacity.
* `Accepted` will pick a random lower-scored peer to upgrade to, if appropriate, and doesn't care about `upgrading` (the dial will fail later, since it's already connected).
* `EvictNext` will return a peer scheduled in `evict` if any, otherwise if beyond capacity just evict the lowest-scored peer.

This limits all of the `upgrading` logic to `DialNext`, `Dialed`, and `DialFailed`, making it much simplier, and it should generally do the right thing in all cases I can think of.

* p2p: add PeerManager.Advertise() (#5957)

Adds a naïve `PeerManager.Advertise()` method that the new PEX reactor can use to fetch addresses to advertise, as well as some other `FIXME`s on address advertisement.

* blockchain v0: fix waitgroup data race (#5970)

## Description

Fixes the data race in usage of `WaitGroup`. Specifically, the case where we invoke `Wait` _before_ the first delta `Add` call when the current waitgroup counter is zero. See https://golang.org/pkg/sync/#WaitGroup.Add.

Still not sure how this manifests itself in a test since the reactor has to be stopped virtually immediately after being started (I think?).

Regardless, this is the appropriate fix.

closes: #5968

* tests: fix `make test` (#5966)

## Description
 
- bump deadlock dep to master
  - fixes `make test` since we now use `deadlock.Once`

Closes: #XXX

* terminate go-fuzz gracefully (w/ SIGINT) (#5973)

and preserve exit code.

```
2021/01/26 03:34:49 workers: 2, corpus: 4 (8m28s ago), crashers: 0, restarts: 1/9976, execs: 11013732 (21596/sec), cover: 121, uptime: 8m30s
make: *** [fuzz-mempool] Terminated
Makefile:5: recipe for target 'fuzz-mempool' failed
Error: Process completed with exit code 124.
```

https://github.com/tendermint/tendermint/runs/1766661614

`continue-on-error` should make GH ignore any error codes.

* p2p: add prototype PEX reactor for new stack (#5971)

This adds a prototype PEX reactor for the new P2P stack.

* proto/p2p: rename PEX messages and fields (#5974)

Fixes #5899 by renaming a bunch of P2P Protobuf entities (while maintaining wire compatibility):

* `Message` to `PexMessage` (as it's only used for PEX messages).
* `PexAddrs` to `PexResponse`.
* `PexResponse.Addrs` to `PexResponse.Addresses`.
* `NetAddress` to `PexAddress` (as it's only used by PEX).

* p2p: resolve PEX addresses in PEX reactor (#5980)

This changes the new prototype PEX reactor to resolve peer address URLs into IP/port PEX addresses itself. Branched off of #5974.

I've spent some time thinking about address handling in the P2P stack. We currently use `PeerAddress` URLs everywhere, except for two places: when dialing a peer, and when exchanging addresses via PEX. We had two options:

1. Resolve addresses to endpoints inside `PeerManager`. This would introduce a lot of added complexity: we would have to track connection statistics per endpoint, have goroutines that asynchronously resolve and refresh these endpoints, deal with resolve scheduling before dialing (which is trickier than it sounds since it involves multiple goroutines in the peer manager and router and messes with peer rating order), handle IP address visibility issues, and so on.

2. Resolve addresses to endpoints (IP/port) only where they're used: when dialing, and in PEX. Everywhere else we use URLs.

I went with 2, because this significantly simplifies the handling of hostname resolution, and because I really think the PEX reactor should migrate to exchanging URLs instead of IP/port numbers anyway -- this allows operators to use DNS names for validators (and can easily migrate them to new IPs and/or load balance requests), and also allows different protocols (e.g. QUIC and `MemoryTransport`). Happy to discuss this.

* test/p2p: close transports to avoid goroutine leak failures (#5982)

* mempool: fix TestReactorNoBroadcastToSender (#5984)

## Description

Looks like I missed a test in the original PR when fixing the tests.

Closes: #5956

* mempool: fix mempool tests timeout (#5988)

* p2p: use stopCtx when dialing peers in Router (#5983)

This ensures we don't leak dial goroutines when shutting down the router.

* docs: fix typo in state sync example (#5989)

Co-authored-by: Erik Grinaker <erik@interchain.berlin>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Co-authored-by: odidev <odidev@puresoftware.com>
Co-authored-by: Lanie Hei <heixx011@umn.edu>
Co-authored-by: Callum Waters <cmwaters19@gmail.com>
Co-authored-by: Aleksandr Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: Sergey <52304443+c29r3@users.noreply.github.com>

.circleci/config.yml

@@ -1,168 +0,0 @@
-version: 2.1
-
-executors:
-  golang:
-    docker:
-      - image: tendermintdev/docker-tendermint-build
-    working_directory: /go/src/github.com/tendermint/tendermint
-    environment:
-      GOBIN: /tmp/bin
-  release:
-    machine: true
-  docs:
-    docker:
-      - image: tendermintdev/docker-website-deployment
-    environment:
-      AWS_REGION: us-east-1
-
-commands:
-  run_test:
-    parameters:
-      script_path:
-        type: string
-    steps:
-      - attach_workspace:
-          at: /tmp/bin
-      - restore_cache:
-          name: "Restore source code cache"
-          keys:
-            - go-src-v1-{{ .Revision }}
-      - checkout
-      - restore_cache:
-          name: "Restore go modules cache"
-          keys:
-            - go-mod-v1-{{ checksum "go.sum" }}
-      - run:
-          name: "Running test"
-          command: |
-            bash << parameters.script_path >>
-jobs:
-  setup_dependencies:
-    executor: golang
-    steps:
-      - checkout
-      - restore_cache:
-          name: "Restore go modules cache"
-          keys:
-            - go-mod-v1-{{ checksum "go.sum" }}
-      - run:
-          command: |
-            mkdir -p /tmp/bin
-      - run:
-          name: Cache go modules
-          command: make go-mod-cache
-      - run:
-          name: tools
-          command: make tools
-      - run:
-          name: "Build binaries"
-          command: make install install_abci
-      - save_cache:
-          name: "Save go modules cache"
-          key: go-mod-v1-{{ checksum "go.sum" }}
-          paths:
-            - "/go/pkg/mod"
-      - save_cache:
-          name: "Save source code cache"
-          key: go-src-v1-{{ .Revision }}
-          paths:
-            - ".git"
-      - persist_to_workspace:
-          root: "/tmp/bin"
-          paths:
-            - "."
-
-  deploy_docs:
-    executor: docs
-    steps:
-      - checkout
-      - run:
-          name: "Pull versions"
-          command: git fetch origin v0.32 v0.33
-      - run:
-          name: "Build docs"
-          command: make build-docs
-      - run:
-          name: "Sync to S3"
-          command: make sync-docs
-
-  prepare_build:
-    executor: golang
-    steps:
-      - restore_cache:
-          name: "Restore source code cache"
-          keys:
-            - go-src-v1-{{ .Revision }}
-      - checkout
-      - run:
-          name: Get next release number
-          command: |
-            export LAST_TAG="`git describe --tags --abbrev=0 --match "${CIRCLE_BRANCH}.*"`"
-            echo "Last tag: ${LAST_TAG}"
-            if [ -z "${LAST_TAG}" ]; then
-              export LAST_TAG="${CIRCLE_BRANCH}"
-              echo "Last tag not found. Possibly fresh branch or feature branch. Setting ${LAST_TAG} as tag."
-            fi
-            export NEXT_TAG="`python -u scripts/release_management/bump-semver.py --version "${LAST_TAG}"`"
-            echo "Next tag: ${NEXT_TAG}"
-            echo "export CIRCLE_TAG=\"${NEXT_TAG}\"" > release-version.source
-      - run:
-          name: Build dependencies
-          command: make tools
-      - persist_to_workspace:
-          root: .
-          paths:
-            - "release-version.source"
-      - save_cache:
-          key: v2-release-deps-{{ checksum "go.sum" }}
-          paths:
-            - "/go/pkg/mod"
-
-  # # Test RPC implementation against the swagger documented specs
-  # contract_tests:
-  #   working_directory: /home/circleci/.go_workspace/src/github.com/tendermint/tendermint
-  #   machine:
-  #     image: circleci/classic:latest
-  #   environment:
-  #     GOBIN: /home/circleci/.go_workspace/bin
-  #     GOPATH: /home/circleci/.go_workspace/
-  #     GOOS: linux
-  #     GOARCH: amd64
-  #   parallelism: 1
-  #   steps:
-  #     - checkout
-  #     - run:
-  #         name: Test RPC endpoints against swagger documentation
-  #         command: |
-  #           set -x
-  #           export PATH=~/.local/bin:$PATH
-  #           # install node and dredd
-  #           ./scripts/get_nodejs.sh
-  #           # build the binaries with a proper version of Go
-  #           docker run --rm -v "$PWD":/go/src/github.com/tendermint/tendermint -w /go/src/github.com/tendermint/tendermint golang make build-linux build-contract-tests-hooks
-  #           # This docker image works with go 1.7, we can install here the hook handler that contract-tests is going to use
-  #           go get github.com/snikch/goodman/cmd/goodman
-  #           make contract-tests
-
-workflows:
-  version: 2
-  docs:
-    jobs:
-      - deploy_docs:
-          context: tendermint-docs
-          filters:
-            branches:
-              only:
-                - master
-            tags:
-              only:
-                - /^v.*/
-      - deploy_docs:
-          context: tendermint-docs-staging
-          filters:
-            branches:
-              only:
-                - docs-staging
-      # - contract_tests:
-      #     requires:
-      #       - setup_dependencies

.github/CODEOWNERS

@@ -1,10 +1,25 @@
 # CODEOWNERS: https://help.github.com/articles/about-codeowners/
 
-# Everything goes through the following "global owners" by default.
+# Everything goes through the following "global owners" by default. 
 # Unless a later match takes precedence, these three will be
-# requested for review when someone opens a PR.
+# requested for review when someone opens a PR. 
 # Note that the last matching pattern takes precedence, so
 # global owners are only requested if there isn't a more specific
-# codeowner specified below. For this reason, the global codeowners
+# codeowner specified below. For this reason, the global codeowners 
 # are often repeated in package-level definitions.
-*       @alexanderbez @cmwaters @ebuchman @marbar3778 @tessr @tychoish
+*       @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+
+# Overrides for tooling packages
+.github/ @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+DOCKER/ @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+
+# Overrides for core Tendermint packages 
+abci/  @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+evidence/ @cmwaters @ebuchman @melekes @tessr
+light/ @cmwaters @melekes @ebuchman @tessr
+
+# Overrides for docs
+*.md @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr  
+docs/ @marbar3778 @alexanderbez @ebuchman @erikgrinaker @melekes @tessr 
+
+

.github/codecov.yml

@@ -2,9 +2,6 @@ coverage:
   precision: 2
   round: down
   range: "70...100"
-  github_checks:
-    annotations: false
-
   status:
     project:
       default:
@@ -12,6 +9,9 @@ coverage:
     patch: on
     changes: off
 
+github_checks:
+  annotations: false
+
 comment:
   layout: "diff, files"
   behavior: default

.github/dependabot.yml

@@ -23,5 +23,6 @@ updates:
     reviewers:
       - melekes
       - tessr
+      - erikgrinaker
     labels:
       - T:dependencies

.github/workflows/coverage.yml

@@ -44,7 +44,7 @@ jobs:
     steps:
       - uses: actions/setup-go@v2
         with:
-          go-version: "^1.15.4"
+          go-version: "1.15"
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
         with:
@@ -66,7 +66,7 @@ jobs:
     steps:
       - uses: actions/setup-go@v2
         with:
-          go-version: "^1.15.4"
+          go-version: "1.15"
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
         with:
@@ -78,6 +78,10 @@ jobs:
         with:
           name: "${{ github.sha }}-${{ matrix.part }}"
         if: env.GIT_DIFF
+      - name: Set up Go
+        uses: actions/setup-go@v2
+        with:
+          go-version: 1.15
       - name: test & coverage report creation
         run: |
           cat pkgs.txt.part.${{ matrix.part }} | xargs go test -mod=readonly -timeout 8m -race -coverprofile=${{ matrix.part }}profile.out -covermode=atomic
@@ -117,7 +121,7 @@ jobs:
       - run: |
           cat ./*profile.out | grep -v "mode: atomic" >> coverage.txt
         if: env.GIT_DIFF
-      - uses: codecov/codecov-action@v1.0.13
+      - uses: codecov/codecov-action@v1.2.1
         with:
           file: ./coverage.txt
         if: env.GIT_DIFF

.github/workflows/docs.yml

@@ -0,0 +1,32 @@
+name: Documentation
+# This job builds and deploys documentation to github pages.
+# It runs on every push to master, and can be manually triggered.
+on:
+  workflow_dispatch: # allow running workflow manually
+  push:
+    branches:
+      - master
+
+jobs:
+  build-and-deploy:
+    runs-on: ubuntu-latest
+    container:
+      image: tendermintdev/docker-website-deployment
+    steps:
+      - name: Checkout 🛎️
+        uses: actions/checkout@v2.3.1
+        with:
+          persist-credentials: false
+          fetch-depth: 0
+
+      - name: Install and Build 🔧
+        run: |
+          apk add rsync
+          make build-docs
+
+      - name: Deploy 🚀
+        uses: JamesIves/github-pages-deploy-action@3.7.1
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          BRANCH: gh-pages
+          FOLDER: ~/output

.github/workflows/e2e-nightly-34x.yml

@@ -1,76 +0,0 @@
-# Runs randomly generated E2E testnets nightly
-# on the 0.34.x release branch
-
-# !! If you change something in this file, you probably want
-# to update the e2e-nightly-master workflow as well!
-
-name: e2e-nightly-34x
-on:
-  workflow_dispatch: # allow running workflow manually, in theory
-  schedule:
-    - cron: '0 2 * * *'
-
-jobs:
-  e2e-nightly-test:
-    # Run parallel jobs for the listed testnet groups (must match the
-    # ./build/generator -g flag)
-    strategy:
-      fail-fast: false
-      matrix:
-        group: ['00', '01', '02', '03']
-    runs-on: ubuntu-latest
-    timeout-minutes: 60
-    steps:
-      - uses: actions/setup-go@v2
-        with:
-          go-version: '^1.15.4'
-
-      - uses: actions/checkout@v2
-        with:
-          ref: 'v0.34.x'
-
-      - name: Build
-        working-directory: test/e2e
-        # Run make jobs in parallel, since we can't run steps in parallel.
-        run: make -j2 docker generator runner
-
-      - name: Generate testnets
-        working-directory: test/e2e
-        # When changing -g, also change the matrix groups above
-        run: ./build/generator -g 4 -d networks/nightly
-
-      - name: Run testnets in group ${{ matrix.group }}
-        working-directory: test/e2e
-        run: ./run-multiple.sh networks/nightly/*-group${{ matrix.group }}-*.toml
-
-  e2e-nightly-fail:
-    needs: e2e-nightly-test
-    if: ${{ failure() }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Notify Slack on failure
-        uses: rtCamp/action-slack-notify@e9db0ef
-        env:
-          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-          SLACK_CHANNEL: tendermint-internal
-          SLACK_USERNAME: Nightly E2E Tests
-          SLACK_ICON_EMOJI: ':skull:'
-          SLACK_COLOR: danger
-          SLACK_MESSAGE: Nightly E2E tests failed on v0.34.x
-          SLACK_FOOTER: ''
-
-  e2e-nightly-success: # may turn this off once they seem to pass consistently
-    needs: e2e-nightly-test
-    if: ${{ success() }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Notify Slack on success
-        uses: rtCamp/action-slack-notify@ae4223259071871559b6e9d08b24a63d71b3f0c0
-        env:
-          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-          SLACK_CHANNEL: tendermint-internal
-          SLACK_USERNAME: Nightly E2E Tests
-          SLACK_ICON_EMOJI: ':white_check_mark:'
-          SLACK_COLOR: good
-          SLACK_MESSAGE: Nightly E2E tests passed on v0.34.x
-          SLACK_FOOTER: ''

.github/workflows/e2e-nightly.yml

@@ -1,22 +1,20 @@
-# Runs randomly generated E2E testnets nightly on master
-
-# !! If you change something in this file, you probably want
-# to update the e2e-nightly-34x workflow as well!
-
-name: e2e-nightly-master
+# Runs randomly generated E2E testnets nightly.
+name: e2e-nightly
 on:
   workflow_dispatch: # allow running workflow manually
   schedule:
     - cron: '0 2 * * *'
 
 jobs:
-  e2e-nightly-test-2:
+  e2e-nightly-test:
     # Run parallel jobs for the listed testnet groups (must match the
     # ./build/generator -g flag)
     strategy:
       fail-fast: false
       matrix:
         group: ['00', '01', '02', '03']
+          # todo: expand to multiple versions after 0.35 release
+        branch: ['master', 'v0.34.x']
     runs-on: ubuntu-latest
     timeout-minutes: 60
     steps:
@@ -25,6 +23,8 @@ jobs:
           go-version: '1.15'
 
       - uses: actions/checkout@v2
+        with:
+          ref: ${{ matrix.branch}}
 
       - name: Build
         working-directory: test/e2e
@@ -40,8 +40,8 @@ jobs:
         working-directory: test/e2e
         run: ./run-multiple.sh networks/nightly/*-group${{ matrix.group }}-*.toml
 
-  e2e-nightly-fail-2:
-    needs: e2e-nightly-test-2
+  e2e-nightly-fail:
+    needs: e2e-nightly-test
     if: ${{ failure() }}
     runs-on: ubuntu-latest
     steps:
@@ -53,21 +53,5 @@ jobs:
           SLACK_USERNAME: Nightly E2E Tests
           SLACK_ICON_EMOJI: ':skull:'
           SLACK_COLOR: danger
-          SLACK_MESSAGE: Nightly E2E tests failed on master
-          SLACK_FOOTER: ''
-
-  e2e-nightly-success: # may turn this off once they seem to pass consistently
-    needs: e2e-nightly-test-2
-    if: ${{ success() }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Notify Slack on success
-        uses: rtCamp/action-slack-notify@ae4223259071871559b6e9d08b24a63d71b3f0c0
-        env:
-          SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
-          SLACK_CHANNEL: tendermint-internal
-          SLACK_USERNAME: Nightly E2E Tests
-          SLACK_ICON_EMOJI: ':white_check_mark:'
-          SLACK_COLOR: good
-          SLACK_MESSAGE: Nightly E2E tests passed on master
+          SLACK_MESSAGE: Nightly E2E tests failed
           SLACK_FOOTER: ''

.github/workflows/e2e.yml

@@ -2,6 +2,7 @@ name: e2e
 # Runs the CI end-to-end test network on all pushes to master or release branches
 # and every pull request, but only if any Go files have been changed.
 on:
+  workflow_dispatch: # allow running workflow manually
   pull_request:
   push:
     branches:
@@ -15,7 +16,7 @@ jobs:
     steps:
       - uses: actions/setup-go@v2
         with:
-          go-version: '^1.15.4'
+          go-version: '1.15'
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
         with:

.github/workflows/fuzz-nightly.yml

@@ -44,31 +44,17 @@ jobs:
         run: timeout -s SIGINT --preserve-status 10m make fuzz-rpc-server
         continue-on-error: true
 
-      - name: Archive crashers
-        uses: actions/upload-artifact@v2
-        with:
-          name: crashers
-          path: test/fuzz/**/crashers
-          retention-days: 1
-
-      - name: Archive suppressions
-        uses: actions/upload-artifact@v2
-        with:
-          name: suppressions
-          path: test/fuzz/**/suppressions
-          retention-days: 1
-
       - name: Set crashers count
         working-directory: test/fuzz
-        run: echo "::set-output name=count::$(find . -type d -name 'crashers' | xargs -I % sh -c 'ls % | wc -l' | awk '{total += $1} END {print total}')"
+        run: echo "::set-output name=crashers-count::$(find . -type d -name "crashers" | xargs -I % sh -c 'ls % | wc -l' | awk '{total += $1} END {print total}')"
         id: set-crashers-count
 
     outputs:
-      crashers-count: ${{ steps.set-crashers-count.outputs.count }}
+      crashers_count: ${{ steps.set-crashers-count.outputs.crashers-count }}
 
   fuzz-nightly-fail:
     needs: fuzz-nightly-test
-    if: ${{ needs.fuzz-nightly-test.outputs.crashers-count != 0 }}
+    if: ${{ needs.set-crashers-count.outputs.crashers-count != 0 }}
     runs-on: ubuntu-latest
     steps:
       - name: Notify Slack if any crashers

.github/workflows/linkchecker.yml

@@ -7,6 +7,6 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@master
-      - uses: gaurav-nelson/github-action-markdown-link-check@1.0.7
+      - uses: gaurav-nelson/github-action-markdown-link-check@1.0.12
         with:
           folder-path: "docs"

.github/workflows/lint.yaml

@@ -11,7 +11,7 @@ jobs:
   golangci:
     name: golangci-lint
     runs-on: ubuntu-latest
-    timeout-minutes: 4
+    timeout-minutes: 8
     steps:
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
@@ -20,10 +20,10 @@ jobs:
             **/**.go
             go.mod
             go.sum
-      - uses: golangci/golangci-lint-action@v2.5.1
+      - uses: golangci/golangci-lint-action@v2.3.0
         with:
           # Required: the version of golangci-lint is required and must be specified without patch version: we always use the latest patch version.
-          version: v1.38
+          version: v1.31
           args: --timeout 10m
           github-token: ${{ secrets.github_token }}
         if: env.GIT_DIFF

.github/workflows/linter.yml

@@ -27,6 +27,5 @@ jobs:
           DEFAULT_BRANCH: master
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           VALIDATE_MD: true
-          MARKDOWN_CONFIG_FILE: .markdownlint.yml
           VALIDATE_OPAENAPI: true
           VALIDATE_YAML: true

.github/workflows/proto.yml

@@ -2,6 +2,7 @@ name: Protobuf
 # Protobuf runs buf (https://buf.build/) lint and check-breakage
 # This workflow is only run when a .proto file has been modified
 on:
+  workflow_dispatch: # allow running workflow manually
   pull_request:
     paths:
       - "**.proto"

.github/workflows/release.yml

@@ -2,6 +2,8 @@ name: "Release"
 
 on:
   push:
+    branches: 
+      - "RC[0-9]/**"
     tags:
       - "v[0-9]+.[0-9]+.[0-9]+" # Push events to matching v*, i.e. v1.0, v20.15.10
 
@@ -16,12 +18,21 @@ jobs:
 
       - uses: actions/setup-go@v2
         with:
-          go-version: '^1.15.4'
+          go-version: '1.15'
 
       - run: echo https://github.com/tendermint/tendermint/blob/${GITHUB_REF#refs/tags/}/CHANGELOG.md#${GITHUB_REF#refs/tags/} > ../release_notes.md 
+        if: startsWith(github.ref, 'refs/tags/')
 
-      - name: Run GoReleaser
+      - name: Build
         uses: goreleaser/goreleaser-action@v2
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          version: latest
+          args: build --skip-validate   # skip validate skips initial sanity checks in order to be able to fully run
+
+      - name: Release
+        uses: goreleaser/goreleaser-action@v2
+        if: startsWith(github.ref, 'refs/tags/')
         with:
           version: latest
           args: release --rm-dist --release-notes=../release_notes.md

.github/workflows/tests.yml

@@ -25,7 +25,7 @@ jobs:
     steps:
       - uses: actions/setup-go@v2
         with:
-          go-version: "^1.15.4"
+          go-version: "1.15"
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
         with:
@@ -36,7 +36,7 @@ jobs:
       - name: install
         run: make install install_abci
         if: "env.GIT_DIFF != ''"
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/pkg/mod
           key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
@@ -44,7 +44,7 @@ jobs:
             ${{ runner.os }}-go-
         if: env.GIT_DIFF
       # Cache binaries for use by other jobs
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/bin
           key: ${{ runner.os }}-${{ github.sha }}-tm-binary
@@ -57,7 +57,7 @@ jobs:
     steps:
       - uses: actions/setup-go@v2
         with:
-          go-version: "^1.15.4"
+          go-version: "1.15"
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
         with:
@@ -65,14 +65,14 @@ jobs:
             **/**.go
             go.mod
             go.sum
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/pkg/mod
           key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
           restore-keys: |
             ${{ runner.os }}-go-
         if: env.GIT_DIFF
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/bin
           key: ${{ runner.os }}-${{ github.sha }}-tm-binary
@@ -89,7 +89,7 @@ jobs:
     steps:
       - uses: actions/setup-go@v2
         with:
-          go-version: "^1.15.4"
+          go-version: "1.15"
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
         with:
@@ -97,14 +97,14 @@ jobs:
             **/**.go
             go.mod
             go.sum
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/pkg/mod
           key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
           restore-keys: |
             ${{ runner.os }}-go-
         if: env.GIT_DIFF
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/bin
           key: ${{ runner.os }}-${{ github.sha }}-tm-binary
@@ -120,7 +120,7 @@ jobs:
     steps:
       - uses: actions/setup-go@v2
         with:
-          go-version: "^1.15.4"
+          go-version: "1.15"
       - uses: actions/checkout@v2
       - uses: technote-space/get-diff-action@v4
         with:
@@ -128,14 +128,14 @@ jobs:
             **/**.go
             go.mod
             go.sum
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/pkg/mod
           key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
           restore-keys: |
             ${{ runner.os }}-go-
         if: env.GIT_DIFF
-      - uses: actions/cache@v2.1.4
+      - uses: actions/cache@v2.1.3
         with:
           path: ~/go/bin
           key: ${{ runner.os }}-${{ github.sha }}-tm-binary

.gitignore

@@ -1,51 +1,40 @@
-*.swp
-*.swo
-.bak
 *.bak
+*.iml
+*.log
+*.swo
+*.swp
+*/.glide
+*/vendor
 .DS_Store
-build/*
-rpc/test/.tendermint
-.tendermint
-remote_dump
+.bak
+.idea/
 .revision
-vendor
+.tendermint
+.tendermint-lite
+.terraform
 .vagrant
-test/e2e/build
-test/maverick/maverick
-test/e2e/networks/*/
-test/p2p/data/
-test/logs
+.vendor-new/
+.vscode/
+abci-cli
+addrbook.json
+artifacts/*
+build/*
 coverage.txt
+docs/.vuepress/dist
 docs/_build
 docs/dist
-docs/.vuepress/dist
-*.log
-abci-cli
 docs/node_modules/
 index.html.md
-
-scripts/wal2json/wal2json
-scripts/cutWALUntil/cutWALUntil
-
-.idea/
-*.iml
-
-.vscode/
-
 libs/pubsub/query/fuzz_test/output
+profile\.out
+remote_dump
+rpc/test/.tendermint
+scripts/cutWALUntil/cutWALUntil
+scripts/wal2json/wal2json
 shunit2
-
-.tendermint-lite
-addrbook.json
-
-*/vendor
-.vendor-new/
-*/.glide
-.terraform
 terraform.tfstate
 terraform.tfstate.backup
 terraform.tfstate.d
-profile\.out
 test/e2e/build
 test/e2e/networks/*/
 test/logs

.golangci.yml

@@ -6,7 +6,6 @@ linters:
     - dogsled
     - dupl
     - errcheck
-    - exportloopref
     # - funlen
     # - gochecknoglobals
     # - gochecknoinits
@@ -27,7 +26,7 @@ linters:
     # - maligned
     - nakedret
     - prealloc
-    # - scopelint
+    - scopelint
     - staticcheck
     - structcheck
     - stylecheck

.goreleaser.yml

@@ -1,11 +1,11 @@
-project_name: tendermint
+project_name: Tendermint
 
 env:
   # Require use of Go modules.
   - GO111MODULE=on
 
 builds:
-  - id: "Tendermint"
+  - id: "tendermint"
     main: ./cmd/tendermint/main.go
     ldflags:
       - -s -w -X github.com/tendermint/tendermint/version.TMCoreSemVer={{ .Version }}
@@ -26,3 +26,11 @@ checksum:
 
 release:
   name_template: "{{.Version}} (WARNING: BETA SOFTWARE)"
+
+archives:
+  - files:
+    - LICENSE
+    - README.md
+    - UPGRADING.md
+    - SECURITY.md
+    - CHANGELOG.md

.vscode/settings.json

@@ -1,8 +0,0 @@
-{
-  "protoc": {
-    "options": [
-      "--proto_path=${workspaceRoot}/proto",
-      "--proto_path=${workspaceRoot}/third_party/proto"
-    ]
-  }
-}

CHANGELOG.md

@@ -1,201 +1,21 @@
 # Changelog
 
-Friendly reminder, we have a [bug bounty program](https://hackerone.com/cosmos).
-
-## v0.34.14
-
-This release backports the `rollback` feature to allow recovery in the event of an incorrect app hash.
-
-### FEATURES
-
-- [\#6982](https://github.com/tendermint/tendermint/pull/6982) The tendermint binary now has built-in suppport for running the end-to-end test application (with state sync support) (@cmwaters).
-- [cli] [#7033](https://github.com/tendermint/tendermint/pull/7033) Add a `rollback` command to rollback to the previous tendermint state. This may be useful in the event of non-determinstic app hash or when reverting an upgrade. @cmwaters
-
-### IMPROVEMENTS
-
-- [\#7103](https://github.com/tendermint/tendermint/pull/7104) Remove IAVL dependency (backport of #6550) (@cmwaters)
-
-### BUG FIXES
-
-- [\#7057](https://github.com/tendermint/tendermint/pull/7057) Import Postgres driver support for the psql indexer (@creachadair).
-- [ABCI] [\#7110](https://github.com/tendermint/tendermint/issues/7110) Revert "change client to use multi-reader mutexes (#6873)" (@tychoish).
-
-## v0.34.13
-
-This release backports improvements to state synchronization and ABCI
-performance under concurrent load, and the PostgreSQL event indexer.
-
-### IMPROVEMENTS
-
-- [statesync] [\#6881](https://github.com/tendermint/tendermint/issues/6881) improvements to stateprovider logic (@cmwaters)
-- [ABCI] [\#6873](https://github.com/tendermint/tendermint/issues/6873) change client to use multi-reader mutexes (@tychoish)
-- [indexing] [\#6906](https://github.com/tendermint/tendermint/issues/6906) enable the PostgreSQL indexer sink (@creachadair)
-
-## v0.34.12
-
-Special thanks to external contributors on this release: @JayT106.
-
-### FEATURES
-
-- [rpc] [\#6717](https://github.com/tendermint/tendermint/pull/6717) introduce
-  `/genesis_chunked` rpc endpoint for handling large genesis files by chunking them (@tychoish)
-
-### IMPROVEMENTS
-
-- [rpc] [\#6825](https://github.com/tendermint/tendermint/issues/6825) Remove egregious INFO log from `ABCI#Query` RPC. (@alexanderbez)
-
-### BUG FIXES
-
-- [light] [\#6685](https://github.com/tendermint/tendermint/pull/6685) fix bug
-  with incorrectly handling contexts that would occasionally freeze state sync. (@cmwaters)
-- [privval] [\#6748](https://github.com/tendermint/tendermint/issues/6748) Fix vote timestamp to prevent chain halt (@JayT106)
-
-## v0.34.11
-
-*June 18, 2021*
-
-This release improves the robustness of statesync; tweaking channel priorities and timeouts and
-adding two new parameters to the state sync config.
-
-### BREAKING CHANGES
-
-- Apps
-    - [Version] [\#6494](https://github.com/tendermint/tendermint/issues/6494) `TMCoreSemVer` is not required to be set as a ldflag any longer.
-
-### IMPROVEMENTS
-
-- [statesync] [\#6566](https://github.com/tendermint/tendermint/issues/6566) Allow state sync fetchers and request timeout to be configurable. (@alexanderbez)
-- [statesync] [\#6378](https://github.com/tendermint/tendermint/issues/6378) Retry requests for snapshots and add a minimum discovery time (5s) for new snapshots. (@tychoish)
-- [statesync] [\#6582](https://github.com/tendermint/tendermint/issues/6582) Increase chunk priority and add multiple retry chunk requests (@cmwaters)
-
-### BUG FIXES
-
-- [evidence] [\#6375](https://github.com/tendermint/tendermint/issues/6375) Fix bug with inconsistent LightClientAttackEvidence hashing (@cmwaters)
-
-## v0.34.10
-
-*April 14, 2021*
-
-This release fixes a bug where peers would sometimes try to send messages
-on incorrect channels. Special thanks to our friends at Oasis Labs for surfacing
-this issue!
-
-- [p2p/node] [\#6339](https://github.com/tendermint/tendermint/issues/6339) Fix bug with using custom channels (@cmwaters)
-- [light] [\#6346](https://github.com/tendermint/tendermint/issues/6346) Correctly handle too high errors to improve client robustness (@cmwaters)
-
-## v0.34.9
-
-*April 8, 2021*
-
-This release fixes a moderate severity security issue, Security Advisory Alderfly,
-which impacts all networks that rely on Tendermint light clients.
-Further details will be released once networks have upgraded.
-
-This release also includes a small Go API-breaking change, to reduce panics in the RPC layer.
-
-Special thanks to our external contributors on this release: @gchaincl
-
-### BREAKING CHANGES
-
-- Go API
-    - [rpc/jsonrpc/server] [\#6204](https://github.com/tendermint/tendermint/issues/6204) Modify `WriteRPCResponseHTTP(Error)` to return an error (@melekes)
-
-### FEATURES
-
-- [rpc] [\#6226](https://github.com/tendermint/tendermint/issues/6226) Index block events and expose a new RPC method, `/block_search`, to allow querying for blocks by `BeginBlock` and `EndBlock` events (@alexanderbez)
-
-### BUG FIXES
-
-- [rpc/jsonrpc/server] [\#6191](https://github.com/tendermint/tendermint/issues/6191) Correctly unmarshal `RPCRequest` when data is `null` (@melekes)
-- [p2p] [\#6289](https://github.com/tendermint/tendermint/issues/6289) Fix "unknown channels" bug on CustomReactors (@gchaincl)
-- [light/evidence] Adds logic to handle forward lunatic attacks (@cmwaters)
-
-## v0.34.8
-
-*February 25, 2021*
-
-This release, in conjunction with [a fix in the Cosmos SDK](https://github.com/cosmos/cosmos-sdk/pull/8641),
-introduces changes that should mean the logs are much, much quieter. 🎉
-
-### IMPROVEMENTS
-
-- [libs/log] [\#6174](https://github.com/tendermint/tendermint/issues/6174) Include timestamp (`ts` field; `time.RFC3339Nano` format) in JSON logger output (@melekes)
-
-### BUG FIXES
-
-- [abci] [\#6124](https://github.com/tendermint/tendermint/issues/6124) Fixes a panic condition during callback execution in `ReCheckTx` during high tx load. (@alexanderbez)
-
-## v0.34.7
-
-*February 18, 2021*
-
-This release fixes a downstream security issue which impacts Cosmos SDK
-users who are:
-
-* Using Cosmos SDK v0.40.0 or later, AND
-* Running validator nodes, AND
-* Using the file-based `FilePV` implementation for their consensus keys
-
-Users who fulfill all the above criteria were susceptible to leaking
-private key material in the logs. All other users are unaffected.
-
-The root cause was a discrepancy
-between the Tendermint Core (untyped) logger and the Cosmos SDK (typed) logger:
-Tendermint Core's logger automatically stringifies Go interfaces whenever possible;
-however, the Cosmos SDK's logger uses reflection to log the fields within a Go interface.
-
-The introduction of the typed logger meant that previously un-logged fields within
-interfaces are now sometimes logged, including the private key material inside the
-`FilePV` struct.
-
-Tendermint Core v0.34.7 fixes this issue; however, we strongly recommend that all validators
-use remote signer implementations instead of `FilePV` in production.
-
-Thank you to @joe-bowman for his assistance with this vulnerability and a particular
-shout-out to @marbar3778 for diagnosing it quickly.
-
-### BUG FIXES
-
-- [consensus] [\#6128](https://github.com/tendermint/tendermint/pull/6128) Remove privValidator from log call (@tessr)
-
-## v0.34.6
-
-*February 18, 2021*
-
-_Tendermint Core v0.34.5 and v0.34.6 have been recalled due to build tooling problems._
-
-## v0.34.4
-
-*February 11, 2021*
-
-This release includes a fix for a memory leak in the evidence reactor (see #6068, below).
-All Tendermint clients are recommended to upgrade.
-Thank you to our friends at Crypto.com for the initial report of this memory leak!
-
-Special thanks to other external contributors on this release: @yayajacky, @odidev, @laniehei, and @c29r3!
-
-### BUG FIXES
-
-- [light] [\#6022](https://github.com/tendermint/tendermint/pull/6022) Fix a bug when the number of validators equals 100 (@melekes)
-- [light] [\#6026](https://github.com/tendermint/tendermint/pull/6026) Fix a bug when height isn't provided for the rpc calls: `/commit` and `/validators` (@cmwaters)
-- [evidence] [\#6068](https://github.com/tendermint/tendermint/pull/6068) Terminate broadcastEvidenceRoutine when peer is stopped (@melekes)
-
-
-## v0.34.3
+## v0.34.3 
 
 *January 19, 2021*
 
-This release includes a fix for a high-severity security vulnerability,
-a DoS-vector that impacted Tendermint Core v0.34.0-v0.34.2. For more details, see
-[Security Advisory Mulberry](https://github.com/tendermint/tendermint/security/advisories/GHSA-p658-8693-mhvg)
-or https://nvd.nist.gov/vuln/detail/CVE-2021-21271.
+This release includes a fix for a high-severity security vulnerability. 
+More information on this vulnerability will be released on January 26, 2021
+and this changelog will be updated. 
 
-Tendermint Core v0.34.3 also updates GoGo Protobuf to 1.3.2 in order to pick up the fix for
-https://nvd.nist.gov/vuln/detail/CVE-2021-3121.
+It also updates GoGo Protobuf to 1.3.2 in order to pick up the fix for
+https://nvd.nist.gov/vuln/detail/CVE-2021-3121. 
+
+Friendly reminder: We have a [bug bounty program](https://hackerone.com/tendermint).
 
 ### BUG FIXES
 
-- [evidence] [[security fix]](https://github.com/tendermint/tendermint/security/advisories/GHSA-p658-8693-mhvg) Use correct source of evidence time (@cmwaters)
+- [evidence] [N/A] Use correct source of evidence time (@cmwaters)
 - [proto] [\#5886](https://github.com/tendermint/tendermint/pull/5889) Bump gogoproto to 1.3.2 (@marbar3778)
 
 ## v0.34.2
@@ -206,6 +26,8 @@ This release fixes a substantial bug in evidence handling where evidence could
 sometimes be broadcast before the block containing that evidence was fully committed,
 resulting in some nodes panicking when trying to verify said evidence.
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES
 
 - Go API
@@ -229,6 +51,8 @@ disconnecting from this node. As a temporary remedy (until the mempool package
 is refactored), the `max-batch-bytes` was disabled. Transactions will be sent
 one by one without batching.
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES
 
 - CLI/RPC/Config
@@ -257,6 +81,8 @@ Holy smokes, this is a big one! For a more reader-friendly overview of the chang
 Special thanks to external contributors on this release: @james-ray, @fedekunze, @favadi, @alessio,
 @joe-bowman, @cuonglm, @SadPencil and @dongsam.
 
+And as always, friendly reminder, that we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES
 
 - CLI/RPC/Config
@@ -283,14 +109,14 @@ Special thanks to external contributors on this release: @james-ray, @fedekunze,
   - [blockchain] [\#4637](https://github.com/tendermint/tendermint/pull/4637) Migrate blockchain reactor(s) to Protobuf encoding (@marbar3778)
   - [evidence] [\#4949](https://github.com/tendermint/tendermint/pull/4949) Migrate evidence reactor to Protobuf encoding (@marbar3778)
   - [mempool] [\#4940](https://github.com/tendermint/tendermint/pull/4940) Migrate mempool from to Protobuf encoding (@marbar3778)
-  - [mempool] [\#5321](https://github.com/tendermint/tendermint/pull/5321) Batch transactions when broadcasting them to peers (@melekes)
+  - [mempool] [\#5321](https://github.com/tendermint/tendermint/pull/5321) Batch transactions when broadcasting them to peers (@melekes) 
      - `MaxBatchBytes` new config setting defines the max size of one batch.
   - [p2p/pex] [\#4973](https://github.com/tendermint/tendermint/pull/4973) Migrate `p2p/pex` reactor to Protobuf encoding (@marbar3778)
   - [statesync] [\#4943](https://github.com/tendermint/tendermint/pull/4943) Migrate state sync reactor to Protobuf encoding (@marbar3778)
 
 - Blockchain Protocol
 
-  - [evidence] [\#4725](https://github.com/tendermint/tendermint/pull/4725) Remove `Pubkey` from `DuplicateVoteEvidence` (@marbar3778)
+  - [evidence] [\#4725](https://github.com/tendermint/tendermint/pull/4725) Remove `Pubkey` from `DuplicateVoteEvidence` (@marbar3778) 
   - [evidence] [\#5499](https://github.com/tendermint/tendermint/pull/5449) Cap evidence to a maximum number of bytes (supercedes [\#4780](https://github.com/tendermint/tendermint/pull/4780)) (@cmwaters)
   - [merkle] [\#5193](https://github.com/tendermint/tendermint/pull/5193) Header hashes are no longer empty for empty inputs, notably `DataHash`, `EvidenceHash`, and `LastResultsHash` (@erikgrinaker)
   - [state] [\#4845](https://github.com/tendermint/tendermint/pull/4845) Include `GasWanted` and `GasUsed` into `LastResultsHash` (@melekes)
@@ -349,7 +175,7 @@ Special thanks to external contributors on this release: @james-ray, @fedekunze,
   - [types] [\#4852](https://github.com/tendermint/tendermint/pull/4852) Vote & Proposal `SignBytes` is now func `VoteSignBytes` & `ProposalSignBytes` (@marbar3778)
   - [types] [\#4798](https://github.com/tendermint/tendermint/pull/4798) Simplify `VerifyCommitTrusting` func + remove extra validation (@melekes)
   - [types] [\#4845](https://github.com/tendermint/tendermint/pull/4845) Remove `ABCIResult` (@melekes)
-  - [types] [\#5029](https://github.com/tendermint/tendermint/pull/5029) Rename all values from `PartsHeader` to `PartSetHeader` to have consistency (@marbar3778)
+  - [types] [\#5029](https://github.com/tendermint/tendermint/pull/5029) Rename all values from `PartsHeader` to `PartSetHeader` to have consistency (@marbar3778) 
   - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) `Total` in `Parts` & `PartSetHeader` has been changed from a `int` to a `uint32` (@marbar3778)
   - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) Vote: `ValidatorIndex` & `Round` are now `int32` (@marbar3778)
   - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) Proposal: `POLRound` & `Round` are now `int32` (@marbar3778)
@@ -387,7 +213,7 @@ Special thanks to external contributors on this release: @james-ray, @fedekunze,
 - [evidence] [\#4722](https://github.com/tendermint/tendermint/pull/4722) Consolidate evidence store and pool types to improve evidence DB (@cmwaters)
 - [evidence] [\#4839](https://github.com/tendermint/tendermint/pull/4839) Reject duplicate evidence from being proposed (@cmwaters)
 - [evidence] [\#5219](https://github.com/tendermint/tendermint/pull/5219) Change the source of evidence time to block time (@cmwaters)
-- [libs] [\#5126](https://github.com/tendermint/tendermint/pull/5126) Add a sync package which wraps sync.(RW)Mutex & deadlock.(RW)Mutex and use a build flag (deadlock) in order to enable deadlock checking (@marbar3778)
+- [libs] [\#5126](https://github.com/tendermint/tendermint/pull/5126) Add a sync package which wraps sync.(RW)Mutex & deadlock.(RW)Mutex and use a build flag (deadlock) in order to enable deadlock checking (@marbar3778) 
 - [light] [\#4935](https://github.com/tendermint/tendermint/pull/4935) Fetch and compare a new header with witnesses in parallel (@melekes)
 - [light] [\#4929](https://github.com/tendermint/tendermint/pull/4929) Compare header with witnesses only when doing bisection (@melekes)
 - [light] [\#4916](https://github.com/tendermint/tendermint/pull/4916) Validate basic for inbound validator sets and headers before further processing them (@cmwaters)
@@ -497,6 +323,9 @@ as 2/3+ of the signatures are checked._
 
 Special thanks to @njmurarka at Bluzelle Networks for reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [consensus] Do not allow signatures for a wrong block in commits (@ebuchman)
@@ -512,6 +341,8 @@ need to update your code.**
 
 Special thanks to external contributors on this release: @tau3,
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -571,6 +402,8 @@ Special thanks to external contributors on this release: @tau3,
 
 Special thanks to external contributors on this release: @whylee259, @greg-szabo
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -657,6 +490,9 @@ Notes:
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
@@ -669,6 +505,8 @@ and reporting this.
 Special thanks to external contributors on this release:
 @antho1404, @michaelfig, @gterzian, @tau3, @Shivani912
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - CLI/RPC/Config
@@ -719,6 +557,9 @@ Special thanks to external contributors on this release:
 Special thanks to external contributors on this release:
 @princesinha19
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### FEATURES:
 
 - [rpc] [\#3333](https://github.com/tendermint/tendermint/issues/3333) Add `order_by` to `/tx_search` endpoint, allowing to change default ordering from asc to desc (@princesinha19)
@@ -737,6 +578,9 @@ Special thanks to external contributors on this release:
 
 Special thanks to external contributors on this release: @mrekucci, @PSalant726, @princesinha19, @greg-szabo, @dongsam, @cuonglm, @jgimeno, @yenkhoon
 
+Friendly reminder, we have a [bug bounty
+program.](https://hackerone.com/tendermint).
+
 *January 14, 2020*
 
 This release contains breaking changes to the `Block#Header`, specifically
@@ -965,6 +809,9 @@ Notes:
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
@@ -976,6 +823,9 @@ _January, 9, 2020_
 
 Special thanks to external contributors on this release: @greg-szabo, @gregzaitsev, @yenkhoon
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### FEATURES:
 
 - [rpc/lib] [\#4248](https://github.com/tendermint/tendermint/issues/4248) RPC client basic authentication support (@greg-szabo)
@@ -997,6 +847,9 @@ Special thanks to external contributors on this release: @greg-szabo, @gregzaits
 
 Special thanks to external contributors on this release: @erikgrinaker, @guagualvcha, @hsyis, @cosmostuba, @whunmr, @austinabell
 
+Friendly reminder, we have a [bug bounty
+program.](https://hackerone.com/tendermint).
+
 
 ### BREAKING CHANGES:
 
@@ -1036,6 +889,9 @@ identified and fixed here.
 Special thanks to [elvishacker](https://hackerone.com/elvishacker) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -1062,6 +918,9 @@ accepting new peers and only allowing `ed25519` pubkeys.
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for pointing
 this out.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Only allow ed25519 pubkeys when connecting
@@ -1077,6 +936,9 @@ All clients are recommended to upgrade. See
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for discovering
 and reporting this issue.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Fix for panic on nil public key send to a peer
@@ -1087,6 +949,9 @@ and reporting this issue.
 
 Special thanks to external contributors on this release: @jon-certik, @gracenoah, @PSalant726, @gchaincl
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - CLI/RPC/Config
@@ -1122,6 +987,9 @@ guide.
 Special thanks to external contributors on this release:
 @gchaincl, @bluele, @climber73
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### IMPROVEMENTS:
 
 - [consensus] [\#3839](https://github.com/tendermint/tendermint/issues/3839) Reduce "Error attempting to add vote" message severity (Error -> Info)
@@ -1142,6 +1010,9 @@ Special thanks to external contributors on this release:
 Special thanks to external contributors on this release:
 @ruseinov, @bluele, @guagualvcha
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -1181,6 +1052,9 @@ This release contains a minor enhancement to the ABCI and some breaking changes
 - CheckTx requests include a `CheckTxType` enum that can be set to `Recheck` to indicate to the application that this transaction was already checked/validated and certain expensive operations (like checking signatures) can be skipped
 - Removed various functions from `libs` pkgs
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -1226,6 +1100,9 @@ and the RPC, namely:
   [docs](https://github.com/tendermint/tendermint/blob/60827f75623b92eff132dc0eff5b49d2025c591e/docs/spec/abci/abci.md#events)
 - Bind RPC to localhost by default, not to the public interface [UPGRADING/RPC_Changes](./UPGRADING.md#rpc_changes)
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 * CLI/RPC/Config
@@ -1326,6 +1203,9 @@ Notes:
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
@@ -1345,6 +1225,9 @@ identified and fixed here.
 Special thanks to [elvishacker](https://hackerone.com/elvishacker) for finding
 and reporting this.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 - Go API
@@ -1371,6 +1254,9 @@ accepting new peers and only allowing `ed25519` pubkeys.
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for pointing
 this out.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Only allow ed25519 pubkeys when connecting
@@ -1386,6 +1272,9 @@ All clients are recommended to upgrade. See
 Special thanks to [fudongbai](https://hackerone.com/fudongbai) for discovering
 and reporting this issue.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### SECURITY:
 
 - [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Fix for panic on nil public key send to a peer
@@ -1680,6 +1569,9 @@ See the [v0.31.0
 Milestone](https://github.com/tendermint/tendermint/milestone/19?closed=1) for
 more details.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 * CLI/RPC/Config
@@ -1810,7 +1702,7 @@ For more, see issues marked
 
 This release also includes a fix to prevent Tendermint from including the same
 piece of evidence in more than one block. This issue was reported by @chengwenxi in our
-[bug bounty program](https://hackerone.com/cosmos).
+[bug bounty program](https://hackerone.com/tendermint).
 
 ### BREAKING CHANGES:
 
@@ -1899,6 +1791,9 @@ This release contains two important fixes: one for p2p layer where we sometimes
 were not closing connections and one for consensus layer where consensus with
 no empty blocks (`create_empty_blocks = false`) could halt.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### IMPROVEMENTS:
 - [pex] [\#3037](https://github.com/tendermint/tendermint/issues/3037) Only log "Reached max attempts to dial" once
 - [rpc] [\#3159](https://github.com/tendermint/tendermint/issues/3159) Expose
@@ -1937,6 +1832,9 @@ While we are trying to stabilize the Block protocol to preserve compatibility
 with old chains, there may be some final changes yet to come before Cosmos
 launch as we continue to audit and test the software.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 * CLI/RPC/Config
@@ -1984,6 +1882,9 @@ launch as we continue to audit and test the software.
 Special thanks to external contributors on this release:
 @HaoyangLiu
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BUG FIXES:
 - [consensus] Fix consensus halt from proposing blocks with too much evidence
 
@@ -2111,6 +2012,9 @@ Special thanks to @dlguddus for discovering a [major
 issue](https://github.com/tendermint/tendermint/issues/2718#issuecomment-440888677)
 in the proposer selection algorithm.
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 This release is primarily about fixes to the proposer selection algorithm
 in preparation for the [Cosmos Game of
 Stakes](https://blog.cosmos.network/the-game-of-stakes-is-open-for-registration-83a404746ee6).
@@ -2172,6 +2076,9 @@ Special thanks to external contributors on this release:
 @ackratos, @goolAdapter, @james-ray, @joe-bowman, @kostko,
 @nagarajmanjunath, @tomtau
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### FEATURES:
 
 - [rpc] [\#2747](https://github.com/tendermint/tendermint/issues/2747) Enable subscription to tags emitted from `BeginBlock`/`EndBlock` (@kostko)
@@ -2210,6 +2117,9 @@ Special thanks to external contributors on this release:
 Special thanks to external contributors on this release:
 @danil-lashin, @kevlubkcm, @krhubert, @srmo
 
+Friendly reminder, we have a [bug bounty
+program](https://hackerone.com/tendermint).
+
 ### BREAKING CHANGES:
 
 * Go API
@@ -2253,6 +2163,8 @@ Special thanks to external contributors on this release:
 
 Special thanks to external contributors on this release: @hleb-albau, @zhuzeyu
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### FEATURES:
 
 - [rpc] [\#2582](https://github.com/tendermint/tendermint/issues/2582) Enable CORS on RPC API (@hleb-albau)
@@ -2270,6 +2182,8 @@ Special thanks to external contributors on this release: @hleb-albau, @zhuzeyu
 
 Special thanks to external contributors on this release: @katakonst
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 ### IMPROVEMENTS:
 
 - [consensus] [\#2704](https://github.com/tendermint/tendermint/issues/2704) Simplify valid POL round logic
@@ -2297,7 +2211,7 @@ Special thanks to external contributors on this release:
 @james-ray, @overbool, @phymbert, @Slamper, @Uzair1995, @yutianwu.
 
 Special thanks to @Slamper for a series of bug reports in our [bug bounty
-program](https://hackerone.com/cosmos) which are fixed in this release.
+program](https://hackerone.com/tendermint) which are fixed in this release.
 
 This release is primarily about adding Version fields to various data structures,
 optimizing consensus messages for signing and verification in
@@ -2443,6 +2357,8 @@ It also addresses some issues found via security audit, removes various unused
 functions from `libs/common`, and implements
 [ADR-012](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-012-peer-transport.md).
 
+Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermint).
+
 BREAKING CHANGES:
 
 * CLI/RPC/Config

CHANGELOG_PENDING.md

@@ -1,6 +1,6 @@
 # Unreleased Changes
 
-## v0.34.15
+## vX.X
 
 Special thanks to external contributors on this release:
 
@@ -9,20 +9,53 @@ Friendly reminder, we have a [bug bounty program](https://hackerone.com/tendermi
 ### BREAKING CHANGES
 
 - CLI/RPC/Config
+  - [config] \#5598 The `test_fuzz` and `test_fuzz_config` P2P settings have been removed. (@erikgrinaker)
+  - [config] \#5728 `fast_sync = "v1"` is no longer supported (@melekes)
+  - [cli] \#5772 `gen_node_key` prints JSON-encoded `NodeKey` rather than ID and does not save it to `node_key.json` (@melekes)
+  - [cli] \#5777 use hyphen-case instead of snake_case for all cli commands and config parameters (@cmwaters)
 
 - Apps
+  - [ABCI] \#5447 Remove `SetOption` method from `ABCI.Client` interface
+  - [ABCI] \#5447 Reset `Oneof` indexes for  `Request` and `Response`.
+  - [ABCI] \#5818 Use protoio for msg length delimitation. Migrates from int64 to uint64 length delimiters.
 
 - P2P Protocol
 
 - Go API
+  - [abci/client, proxy] \#5673 `Async` funcs return an error, `Sync` and `Async` funcs accept `context.Context` (@melekes)
+  - [p2p] Removed unused function `MakePoWTarget`. (@erikgrinaker)
+  - [libs/bits] \#5720 Validate `BitArray` in `FromProto`, which now returns an error (@melekes)
+  - [proto/p2p] Renamed `DefaultNodeInfo` and `DefaultNodeInfoOther` to `NodeInfo` and `NodeInfoOther` (@erikgrinaker)
+  - [proto/p2p] Rename `NodeInfo.default_node_id` to `node_id` (@erikgrinaker)
+  - [libs/os] Kill() and {Must,}{Read,Write}File() functions have been removed. (@alessio)
+  - [store] \#5848 Remove block store state in favor of using the db iterators directly (@cmwaters)
+  - [state] \#5864 Use an iterator when pruning state (@cmwaters)
 
 - Blockchain Protocol
 
+- Data Storage
+  - [store/state/evidence/light] \#5771 Use an order-preserving varint key encoding (@cmwaters)
+
 ### FEATURES
 
 ### IMPROVEMENTS
 
+- [crypto/ed25519] \#5632 Adopt zip215 `ed25519` verification. (@marbar3778)
+- [privval] \#5603 Add `--key` to `init`, `gen_validator`, `testnet` & `unsafe_reset_priv_validator` for use in generating `secp256k1` keys.
+- [privval] \#5725 Add gRPC support to private validator. 
+- [privval] \#5876 `tendermint show-validator` will query the remote signer if gRPC is being used (@marbar3778)
+- [abci/client] \#5673 `Async` requests return an error if queue is full (@melekes)
+- [mempool] \#5673 Cancel `CheckTx` requests if RPC client disconnects or times out (@melekes)
+- [abci] \#5706 Added `AbciVersion` to `RequestInfo` allowing applications to check ABCI version when connecting to Tendermint. (@marbar3778)
+- [blockchain/v1] \#5728 Remove in favor of v2 (@melekes)
+- [blockchain/v0] \#5741 Relax termination conditions and increase sync timeout (@melekes)
+- [cli] \#5772 `gen_node_key` output now contains node ID (`id` field) (@melekes)
+- [blockchain/v2] \#5774 Send status request when new peer joins (@melekes)
+- [consensus] \#5792 Deprecates the `time_iota_ms` consensus parameter, to reduce the bug surface. The parameter is no longer used. (@valardragon)
+
 ### BUG FIXES
 
-- [\#7057](https://github.com/tendermint/tendermint/pull/7057) Import Postgres driver support for the psql indexer (@creachadair).
-- [\#7106](https://github.com/tendermint/tendermint/pull/7106) Revert mutex change to ABCI Clients (@tychoish).
+- [types] \#5523 Change json naming of `PartSetHeader` within `BlockID` from `parts` to `part_set_header` (@marbar3778)
+- [privval] \#5638 Increase read/write timeout to 5s and calculate ping interval based on it (@JoeKash)
+- [blockchain/v1] [\#5701](https://github.com/tendermint/tendermint/pull/5701) Handle peers without blocks (@melekes)
+- [blockchain/v1] \#5711 Fix deadlock (@melekes)

CONTRIBUTING.md

@@ -106,22 +106,40 @@ specify exactly the dependency you want to update, eg.
 
 We use [Protocol Buffers](https://developers.google.com/protocol-buffers) along with [gogoproto](https://github.com/gogo/protobuf) to generate code for use across Tendermint Core.
 
-For linting and checking breaking changes, we use [buf](https://buf.build/). If you would like to run linting and check if the changes you have made are breaking then you will need to have docker running locally. Then the linting cmd will be `make proto-lint` and the breaking changes check will be `make proto-check-breaking`.
+For linting, checking breaking changes and generating proto stubs, we use [buf](https://buf.build/). If you would like to run linting and check if the changes you have made are breaking then you will need to have docker running locally. Then the linting cmd will be `make proto-lint` and the breaking changes check will be `make proto-check-breaking`.
 
-We use [Docker](https://www.docker.com/) to generate the protobuf stubs. To generate the stubs yourself, make sure docker is running then run `make proto-gen`.
+There are two ways to generate your proto stubs.
 
-## Vagrant
+1. Use Docker, pull an image that will generate your proto stubs with no need to install anything. `make proto-gen-docker`
+2. Run `make proto-gen` after installing `buf` and `gogoproto`, you can do this by running `make protobuf`.
 
-If you are a [Vagrant](https://www.vagrantup.com/) user, you can get started
-hacking Tendermint with the commands below.
+### Installation Instructions
 
-NOTE: In case you installed Vagrant in 2017, you might need to run
-`vagrant box update` to upgrade to the latest `ubuntu/xenial64`.
+To install `protoc`, download an appropriate release (<https://github.com/protocolbuffers/protobuf>) and then move the provided binaries into your PATH (follow instructions in README included with the download).
+
+To install `gogoproto`, do the following:
 
 ```sh
-vagrant up
-vagrant ssh
-make test
+go get github.com/gogo/protobuf/gogoproto
+cd $GOPATH/pkg/mod/github.com/gogo/protobuf@v1.3.1 # or wherever go get installs things
+make install
+```
+
+You should now be able to run `make proto-gen` from inside the root Tendermint directory to generate new files from proto files.
+
+### Visual Studio Code
+
+If you are a VS Code user, you may want to add the following to your `.vscode/settings.json`:  
+
+```json
+{	
+  "protoc": {	
+    "options": [	
+      "--proto_path=${workspaceRoot}/proto",	
+      "--proto_path=${workspaceRoot}/third_party/proto"	
+    ]	
+  }	
+}
 ```
 
 ## Changelog
@@ -229,6 +247,36 @@ Each PR should have one commit once it lands on `master`; this can be accomplish
 
 #### Major Release
 
+This major release process assumes that this release was preceded by release candidates. 
+If there were no release candidates, and you'd like to cut a major release directly from master, see below. 
+
+1. Start on the latest RC branch (`RCx/vX.X.0`).
+2. Run integration tests.
+3. Branch off of the RC branch (`git checkout -b release-prep`) and prepare the release:
+   - "Squash" changes from the changelog entries for the RCs into a single entry, 
+      and add all changes included in `CHANGELOG_PENDING.md`. 
+      (Squashing includes both combining all entries, as well as removing or simplifying
+      any intra-RC changes. It may also help to alphabetize the entries by package name.)
+   - Run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for
+     all PRs 
+   - Ensure that UPGRADING.md is up-to-date and includes notes on any breaking changes
+      or other upgrading flows. 
+   - Bump P2P and block protocol versions in  `version.go`, if necessary
+   - Bump ABCI protocol version in `version.go`, if necessary
+   - Add any release notes you would like to be added to the body of the release to `release_notes.md`.
+4. Open a PR with these changes against the RC branch (`RCx/vX.X.0`). 
+5. Once these changes are on the RC branch, branch off of the RC branch again to create a release branch:
+   - `git checkout RCx/vX.X.0`
+   - `git checkout -b release/vX.X.0` 
+6. Push a tag with prepared release details. This will trigger the actual release `vX.X.0`.
+   - `git tag -a vX.X.0 -m 'Release vX.X.0'`
+   - `git push origin vX.X.0`
+7. Make sure that `master` is updated with the latest `CHANGELOG.md`, `CHANGELOG_PENDING.md`, and `UPGRADING.md`. 
+8. Create the long-lived minor release branch `RC0/vX.X.1` for the next point release on this
+   new major release series. 
+
+##### Major Release (from `master`)
+
 1. Start on `master`
 2. Run integration tests (see `test_integrations` in Makefile)
 3. Prepare release in a pull request against `master` (to be squash merged):
@@ -236,11 +284,10 @@ Each PR should have one commit once it lands on `master`; this can be accomplish
       had release candidates, squash all the RC updates into one
    - Run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for
      all issues
-   - run `bash ./scripts/authors.sh` to get a list of authors since the latest
+   - Run `bash ./scripts/authors.sh` to get a list of authors since the latest
      release, and add the github aliases of external contributors to the top of
      the changelog. To lookup an alias from an email, try `bash ./scripts/authors.sh <email>`
    - Reset the `CHANGELOG_PENDING.md`
-   - Bump TMVersionDefault version in  `version.go`
    - Bump P2P and block protocol versions in  `version.go`, if necessary
    - Bump ABCI protocol version in `version.go`, if necessary
    - Make sure all significant breaking changes are covered in `UPGRADING.md`
@@ -248,45 +295,39 @@ Each PR should have one commit once it lands on `master`; this can be accomplish
 4. Push a tag with prepared release details (this will trigger the release `vX.X.0`)
    - `git tag -a vX.X.x -m 'Release vX.X.x'`
    - `git push origin vX.X.x`
-5. Update the changelog.md file on master with the releases changelog.
+5. Update the `CHANGELOG.md` file on master with the releases changelog.
 6. Delete any RC branches and tags for this release (if applicable)
 
-#### Minor Release
+#### Minor Release (Point Releases)
 
-Minor releases are done differently from major releases: They are built off of long-lived release candidate branches, rather than from master.
+Minor releases are done differently from major releases: They are built off of long-lived backport branches, rather than from master.
+Each release "line" (e.g. 0.34 or 0.33) has its own long-lived backport branch, and
+the backport branches have names like `v0.34.x` or `v0.33.x` (literally, `x`; it is not a placeholder in this case).
 
-1. Checkout the long-lived release candidate branch: `git checkout rcX/vX.X.X`
+As non-breaking changes land on `master`, they should also be backported (cherry-picked) to these backport branches.
+
+Minor releases don't have release candidates by default, although any tricky changes may merit a release candidate. 
+
+To create a minor release:
+
+1. Checkout the long-lived backport branch: `git checkout vX.X.x`
 2. Run integration tests: `make test_integrations`
-3. Prepare the release:
-   - copy `CHANGELOG_PENDING.md` to top of `CHANGELOG.md`
-   - run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for all issues
-   - run `bash ./scripts/authors.sh` to get a list of authors since the latest release, and add the GitHub aliases of external contributors to the top of the CHANGELOG. To lookup an alias from an email, try `bash ./scripts/authors.sh <email>`
-   - reset the `CHANGELOG_PENDING.md`
-   - bump P2P and block protocol versions in  `version.go`, if necessary
-   - bump ABCI protocol version in `version.go`, if necessary
-   - make sure all significant breaking changes are covered in `UPGRADING.md`
+3. Check out a new branch and prepare the release:
+   - Copy `CHANGELOG_PENDING.md` to top of `CHANGELOG.md`
+   - Run `python ./scripts/linkify_changelog.py CHANGELOG.md` to add links for all issues
+   - Run `bash ./scripts/authors.sh` to get a list of authors since the latest release, and add the GitHub aliases of external contributors to the top of the CHANGELOG. To lookup an alias from an email, try `bash ./scripts/authors.sh <email>`
+   - Reset the `CHANGELOG_PENDING.md`
+   - Bump the ABCI version number, if necessary. 
+     (Note that ABCI follows semver, and that ABCI versions are the only versions 
+     which can change during minor releases, and only field additions are valid minor changes.)
    - Add any release notes you would like to be added to the body of the release to `release_notes.md`.
-4. Create a release branch `release/vX.X.x` off the release candidate branch:
-   - `git checkout -b release/vX.X.x`
-   - `git push -u origin release/vX.X.x`
-   - Note that all branches prefixed with `release` are protected once pushed. You will need admin help to make any changes to the branch.
-5. Once the release branch has been approved, make sure to pull it locally, then push a tag.
+4. Open a PR with these changes that will land them back on `vX.X.x`
+5. Once this change has landed on the backport branch, make sure to pull it locally, then push a tag.
    - `git tag -a vX.X.x -m 'Release vX.X.x'`
    - `git push origin vX.X.x`
 6. Create a pull request back to master with the CHANGELOG & version changes from the latest release.
    - Remove all `R:minor` labels from the pull requests that were included in the release.
-   - Do not merge the release branch into master.
-7. Delete the former long lived release candidate branch once the release has been made.
-8. Create a new release candidate branch to be used for the next release.
-
-#### Backport Release
-
-1. start from the existing release branch you want to backport changes to (e.g. v0.30)
-   Branch to a release/vX.X.X branch locally (e.g. release/v0.30.7)
-2. Cherry pick the commit(s) that contain the changes you want to backport (usually these commits are from squash-merged PRs which were already reviewed)
-3. Follow steps 2 and 3 from [Major Release](#major-release)
-4. Push changes to release/vX.X.X branch
-5. Open a PR against the existing vX.X branch
+   - Do not merge the backport branch into master.
 
 #### Release Candidates
 
@@ -310,86 +351,12 @@ have distinct names from the tags/release names.)
 
 ## Testing
 
-### Unit tests
+All repos should be hooked up to [CircleCI](https://circleci.com/).
 
-Unit tests are located in `_test.go` files as directed by [the Go testing
-package](https://golang.org/pkg/testing/). If you're adding or removing a
-function, please check there's a `TestType_Method` test for it.
-
-Run: `make test`
-
-### Integration tests
-
-Integration tests are also located in `_test.go` files. What differentiates
-them is a more complicated setup, which usually involves setting up two or more
-components.
-
-Run: `make test_integrations`
-
-### End-to-end tests
-
-End-to-end tests are used to verify a fully integrated Tendermint network.
-
-See [README](./test/e2e/README.md) for details.
-
-Run:
-
-```sh
-cd test/e2e && \
-  make && \
-  ./build/runner -f networks/ci.toml
-```
-
-### Maverick
-
-**If you're changing the code in `consensus` package, please make sure to
-replicate all the changes in `./test/maverick/consensus`**. Maverick is a
-byzantine node used to assert that the validator gets punished for malicious
-behavior.
-
-See [README](./test/maverick/README.md) for details.
-
-### Model-based tests (ADVANCED)
-
-*NOTE: if you're just submitting your first PR, you won't need to touch these
-most probably (99.9%)*.
-
-For components, that have been [formally
-verified](https://en.wikipedia.org/wiki/Formal_verification) using
-[TLA+](https://en.wikipedia.org/wiki/TLA%2B), it may be possible to generate
-tests using a combination of the [Apalache Model
-Checker](https://apalache.informal.systems/) and [tendermint-rs testgen
-util](https://github.com/informalsystems/tendermint-rs/tree/master/testgen).
-
-Now, I know there's a lot to take in. If you want to learn more, check out [
-this video](https://www.youtube.com/watch?v=aveoIMphzW8) by Andrey Kupriyanov
-& Igor Konnov.
-
-At the moment, we have model-based tests for the light client, located in the
-`./light/mbt` directory.
-
-Run: `cd light/mbt && go test`
-
-### Fuzz tests (ADVANCED)
-
-*NOTE: if you're just submitting your first PR, you won't need to touch these
-most probably (99.9%)*.
-
-[Fuzz tests](https://en.wikipedia.org/wiki/Fuzzing) can be found inside the
-`./test/fuzz` directory. See [README.md](./test/fuzz/README.md) for details.
-
-Run: `cd test/fuzz && make fuzz-{PACKAGE-COMPONENT}`
-
-### Jepsen tests (ADVANCED)
-
-*NOTE: if you're just submitting your first PR, you won't need to touch these
-most probably (99.9%)*.
-
-[Jepsen](http://jepsen.io/) tests are used to verify the
-[linearizability](https://jepsen.io/consistency/models/linearizable) property
-of the Tendermint consensus. They are located in a separate repository
--> <https://github.com/tendermint/jepsen>. Please refer to its README for more
-information.
+If they have `.go` files in the root directory, they will be automatically
+tested by circle using `go test -v -race ./...`. If not, they will need a
+`circle.yml`. Ideally, every repo has a `Makefile` that defines `make test` and
+includes its continuous integration status using a badge in the `README.md`.
 
 ### RPC Testing
 
@@ -402,8 +369,4 @@ make build-linux build-contract-tests-hooks
 make contract-tests
 ```
 
-**WARNING: these are currently broken due to <https://github.com/apiaryio/dredd>
-not supporting complete OpenAPI 3**.
-
-This command will popup a network and check every endpoint against what has
-been documented.
+This command will popup a network and check every endpoint against what has been documented

DOCKER/Dockerfile

@@ -49,7 +49,7 @@ ENV PROXY_APP=kvstore MONIKER=dockernode CHAIN_ID=dockerchain
 COPY ./DOCKER/docker-entrypoint.sh /usr/local/bin/
 
 ENTRYPOINT ["docker-entrypoint.sh"]
-CMD ["node"]
+CMD ["start"]
 
 # Expose the data directory as a volume since there's mutable state in there
 VOLUME [ "$TMHOME" ]

DOCKER/README.md

@@ -32,7 +32,7 @@ A quick example of a built-in app and Tendermint core in one container.
 
 ```sh
 docker run -it --rm -v "/tmp:/tendermint" tendermint/tendermint init
-docker run -it --rm -v "/tmp:/tendermint" tendermint/tendermint node --proxy_app=kvstore
+docker run -it --rm -v "/tmp:/tendermint" tendermint/tendermint node --proxy-app=kvstore
 ```
 
 ## Local cluster

DOCKER/docker-entrypoint.sh

@@ -6,11 +6,11 @@ if [ ! -d "$TMHOME/config" ]; then
 	tendermint init
 
 	sed -i \
-		-e "s/^proxy_app\s*=.*/proxy_app = \"$PROXY_APP\"/" \
+		-e "s/^proxy-app\s*=.*/proxy-app = \"$PROXY_APP\"/" \
 		-e "s/^moniker\s*=.*/moniker = \"$MONIKER\"/" \
-		-e 's/^addr_book_strict\s*=.*/addr_book_strict = false/' \
-		-e 's/^timeout_commit\s*=.*/timeout_commit = "500ms"/' \
-		-e 's/^index_all_tags\s*=.*/index_all_tags = true/' \
+		-e 's/^addr-book-strict\s*=.*/addr-book-strict = false/' \
+		-e 's/^timeout-commit\s*=.*/timeout-commit = "500ms"/' \
+		-e 's/^index-all-tags\s*=.*/index-all-tags = true/' \
 		-e 's,^laddr = "tcp://127.0.0.1:26657",laddr = "tcp://0.0.0.0:26657",' \
 		-e 's/^prometheus\s*=.*/prometheus = true/' \
 		"$TMHOME/config/config.toml"

Makefile

@@ -1,5 +1,7 @@
+#!/usr/bin/make -f
+
 PACKAGES=$(shell go list ./...)
-OUTPUT?=build/tendermint
+BUILDDIR ?= $(CURDIR)/build
 
 BUILD_TAGS?=tendermint
 
@@ -56,20 +58,25 @@ LD_FLAGS += $(LDFLAGS)
 all: check build test install
 .PHONY: all
 
-include tests.mk
+# The below include contains the tools.
+include tools/Makefile
+include test/Makefile
 
 ###############################################################################
-###                                Build Tendermint                        ###
+###                                Build Tendermint                         ###
 ###############################################################################
 
-build:
-	CGO_ENABLED=$(CGO_ENABLED) go build $(BUILD_FLAGS) -tags '$(BUILD_TAGS)' -o $(OUTPUT) ./cmd/tendermint/
+build: $(BUILDDIR)/
+	CGO_ENABLED=$(CGO_ENABLED) go build $(BUILD_FLAGS) -tags '$(BUILD_TAGS)' -o $(BUILDDIR)/ ./cmd/tendermint/
 .PHONY: build
 
 install:
 	CGO_ENABLED=$(CGO_ENABLED) go install $(BUILD_FLAGS) -tags $(BUILD_TAGS) ./cmd/tendermint
 .PHONY: install
 
+$(BUILDDIR)/:
+	mkdir -p $@
+
 ###############################################################################
 ###                                Protobuf                                 ###
 ###############################################################################
@@ -78,10 +85,19 @@ proto-all: proto-gen proto-lint proto-check-breaking
 .PHONY: proto-all
 
 proto-gen:
+	## If you get the following error,
+	## "error while loading shared libraries: libprotobuf.so.14: cannot open shared object file: No such file or directory"
+	## See https://stackoverflow.com/a/25518702
+	## Note the $< here is substituted for the %.proto
+	## Note the $@ here is substituted for the %.pb.go
+	@sh scripts/protocgen.sh
+.PHONY: proto-gen
+
+proto-gen-docker:
 	@docker pull -q tendermintdev/docker-build-proto
 	@echo "Generating Protobuf files"
 	@docker run -v $(shell pwd):/workspace --workdir /workspace tendermintdev/docker-build-proto sh ./scripts/protocgen.sh
-.PHONY: proto-gen
+.PHONY: proto-gen-docker
 
 proto-lint:
 	@$(DOCKER_BUF) check lint --error-format=json
@@ -112,6 +128,27 @@ install_abci:
 	@go install -mod=readonly ./abci/cmd/...
 .PHONY: install_abci
 
+###############################################################################
+###                           	Privval Server                              ###
+###############################################################################
+
+build_privval_server:
+	@go build -mod=readonly -o $(BUILDDIR)/ -i ./cmd/priv_val_server/...
+.PHONY: build_privval_server
+
+generate_test_cert:
+	# generate self signing ceritificate authority
+	@certstrap init --common-name "root CA" --expires "20 years"
+	# generate server cerificate
+	@certstrap request-cert -cn server -ip 127.0.0.1
+	# self-sign server cerificate with rootCA
+	@certstrap sign server --CA "root CA" 
+	# generate client cerificate
+	@certstrap request-cert -cn client -ip 127.0.0.1
+	# self-sign client cerificate with rootCA
+	@certstrap sign client --CA "root CA" 
+.PHONY: generate_test_cert
+
 ###############################################################################
 ###                              Distribution                               ###
 ###############################################################################
@@ -140,7 +177,7 @@ draw_deps:
 
 get_deps_bin_size:
 	@# Copy of build recipe with additional flags to perform binary size analysis
-	$(eval $(shell go build -work -a $(BUILD_FLAGS) -tags $(BUILD_TAGS) -o $(OUTPUT) ./cmd/tendermint/ 2>&1))
+	$(eval $(shell go build -work -a $(BUILD_FLAGS) -tags $(BUILD_TAGS) -o $(BUILDDIR)/ ./cmd/tendermint/ 2>&1))
 	@find $(WORK) -type f -name "*.a" | xargs -I{} du -hxs "{}" | sort -rh | sed -e s:${WORK}/::g > deps_bin_size.log
 	@echo "Results can be found here: $(CURDIR)/deps_bin_size.log"
 .PHONY: get_deps_bin_size
@@ -184,31 +221,23 @@ DESTINATION = ./index.html.md
 ###############################################################################
 ###                           Documentation                                 ###
 ###############################################################################
-
+# todo remove once tendermint.com DNS is solved
 build-docs:
-	cd docs && \
-	while read p; do \
-		(git checkout $${p} . && npm install && VUEPRESS_BASE="/$${p}/" npm run build) ; \
-		mkdir -p ~/output/$${p} ; \
-		cp -r .vuepress/dist/* ~/output/$${p}/ ; \
-		cp ~/output/$${p}/index.html ~/output ; \
+	@cd docs && \
+	while read -r branch path_prefix; do \
+		(git checkout $${branch} && npm install && VUEPRESS_BASE="/$${path_prefix}/" npm run build) ; \
+		mkdir -p ~/output/$${path_prefix} ; \
+		cp -r .vuepress/dist/* ~/output/$${path_prefix}/ ; \
+		cp ~/output/$${path_prefix}/index.html ~/output ; \
 	done < versions ;
 .PHONY: build-docs
 
-sync-docs:
-	cd ~/output && \
-	echo "role_arn = ${DEPLOYMENT_ROLE_ARN}" >> /root/.aws/config ; \
-	echo "CI job = ${CIRCLE_BUILD_URL}" >> version.html ; \
-	aws s3 sync . s3://${WEBSITE_BUCKET} --profile terraform --delete ; \
-	aws cloudfront create-invalidation --distribution-id ${CF_DISTRIBUTION_ID} --profile terraform --path "/*" ;
-.PHONY: sync-docs
-
 ###############################################################################
 ###                            Docker image                                 ###
 ###############################################################################
 
 build-docker: build-linux
-	cp $(OUTPUT) DOCKER/tendermint
+	cp $(BUILDDIR)/tendermint DOCKER/tendermint
 	docker build --label=tendermint --tag="tendermint/tendermint" DOCKER
 	rm -rf DOCKER/tendermint
 .PHONY: build-docker
@@ -218,7 +247,7 @@ build-docker: build-linux
 ###############################################################################
 
 # Build linux binary on other platforms
-build-linux:
+build-linux: tools
 	GOOS=linux GOARCH=amd64 $(MAKE) build
 .PHONY: build-linux
 
@@ -262,3 +291,17 @@ endif
 contract-tests:
 	dredd
 .PHONY: contract-tests
+
+clean:
+	rm -rf $(CURDIR)/artifacts/ $(BUILDDIR)/
+
+build-reproducible:
+	docker rm latest-build || true
+	docker run --volume=$(CURDIR):/sources:ro \
+		--env TARGET_PLATFORMS='linux/amd64 linux/arm64 darwin/amd64 windows/amd64' \
+		--env APP=tendermint \
+		--env COMMIT=$(shell git rev-parse --short=8 HEAD) \
+		--env VERSION=$(shell git describe --tags) \
+		--name latest-build cosmossdk/rbuilder:latest
+	docker cp -a latest-build:/home/builder/artifacts/ $(CURDIR)/
+.PHONY: build-reproducible

PHILOSOPHY.md

@@ -1,158 +0,0 @@
-# Design goals
-
-The design goals for Tendermint (and the SDK and related libraries) are:
-
-* Simplicity and Legibility
-* Parallel performance, namely ability to utilize multicore architecture
-* Ability to evolve the codebase bug-free
-* Debuggability
-* Complete correctness that considers all edge cases, esp in concurrency
-* Future-proof modular architecture, message protocol, APIs, and encapsulation
-
-
-## Justification
-
-Legibility is key to maintaining bug-free software as it evolves toward more
-optimizations, more ease of debugging, and additional features.
-
-It is too easy to introduce bugs over time by replacing lines of code with
-those that may panic, which means ideally locks are unlocked by defer
-statements.
-
-For example,
-
-```go
-func (obj *MyObj) something() {
-	mtx.Lock()
-	obj.something = other
-	mtx.Unlock()
-}
-```
-
-It is too easy to refactor the codebase in the future to replace `other` with
-`other.String()` for example, and this may introduce a bug that causes a
-deadlock.  So as much as reasonably possible, we need to be using defer
-statements, even though it introduces additional overhead.
-
-If it is necessary to optimize the unlocking of mutex locks, the solution is
-more modularity via smaller functions, so that defer'd unlocks are scoped
-within a smaller function.
-
-Similarly, idiomatic for-loops should always be preferred over those that use
-custom counters, because it is too easy to evolve the body of a for-loop to
-become more complicated over time, and it becomes more and more difficult to
-assess the correctness of such a for-loop by visual inspection.
-
-
-## On performance
-
-It doesn't matter whether there are alternative implementations that are 2x or
-3x more performant, when the software doesn't work, deadlocks, or if bugs
-cannot be debugged.  By taking advantage of multicore concurrency, the
-Tendermint implementation will at least be an order of magnitude within the
-range of what is theoretically possible.  The design philosophy of Tendermint,
-and the choice of Go as implementation language, is designed to make Tendermint
-implementation the standard specification for concurrent BFT software.
-
-By focusing on the message protocols (e.g. ABCI, p2p messages), and
-encapsulation e.g. IAVL module, (relatively) independent reactors, we are both
-implementing a standard implementation to be used as the specification for
-future implementations in more optimizable languages like Rust, Java, and C++;
-as well as creating sufficiently performant software. Tendermint Core will
-never be as fast as future implementations of the Tendermint Spec, because Go
-isn't designed to be as fast as possible.  The advantage of using Go is that we
-can develop the whole stack of modular components **faster** than in other
-languages.
-
-Furthermore, the real bottleneck is in the application layer, and it isn't
-necessary to support more than a sufficiently decentralized set of validators
-(e.g. 100 ~ 300 validators is sufficient, with delegated bonded PoS).
-
-Instead of optimizing Tendermint performance down to the metal, lets focus on
-optimizing on other matters, namely ability to push feature complete software
-that works well enough, can be debugged and maintained, and can serve as a spec
-for future implementations.
-
-
-## On encapsulation
-
-In order to create maintainable, forward-optimizable software, it is critical
-to develop well-encapsulated objects that have well understood properties, and
-to re-use these easy-to-use-correctly components as building blocks for further
-encapsulated meta-objects.
-
-For example, mutexes are cheap enough for Tendermint's design goals when there
-isn't goroutine contention, so it is encouraged to create concurrency safe
-structures with struct-level mutexes.  If they are used in the context of
-non-concurrent logic, then the performance is good enough.  If they are used in
-the context of concurrent logic, then it will still perform correctly.
-
-Examples of this design principle can be seen in the types.ValidatorSet struct,
-and the rand.Rand struct.  It's one single struct declaration that can be used
-in both concurrent and non-concurrent logic, and due to its well encapsulation,
-it's easy to get the usage of the mutex right.
-
-### example: rand.Rand
-
-`The default Source is safe for concurrent use by multiple goroutines, but
-Sources created by NewSource are not`.  The reason why the default
-package-level source is safe for concurrent use is because it is protected (see
-`lockedSource` in <https://golang.org/src/math/rand/rand.go>).
-
-But we shouldn't rely on the global source, we should be creating our own
-Rand/Source instances and using them, especially for determinism in testing.
-So it is reasonable to have rand.Rand be protected by a mutex.  Whether we want
-our own implementation of Rand is another question, but the answer there is
-also in the affirmative.  Sometimes you want to know where Rand is being used
-in your code, so it becomes a simple matter of dropping in a log statement to
-inject inspectability into Rand usage.  Also, it is nice to be able to extend
-the functionality of Rand with custom methods.  For these reasons, and for the
-reasons which is outlined in this design philosophy document, we should
-continue to use the rand.Rand object, with mutex protection.
-
-Another key aspect of good encapsulation is the choice of exposed vs unexposed
-methods.  It should be clear to the reader of the code, which methods are
-intended to be used in what context, and what safe usage is.  Part of this is
-solved by hiding methods via unexported methods.  Another part of this is
-naming conventions on the methods (e.g. underscores) with good documentation,
-and code organization.  If there are too many exposed methods and it isn't
-clear what methods have what side effects, then there is something wrong about
-the design of abstractions that should be revisited.
-
-
-## On concurrency
-
-In order for Tendermint to remain relevant in the years to come, it is vital
-for Tendermint to take advantage of multicore architectures.  Due to the nature
-of the problem, namely consensus across a concurrent p2p gossip network, and to
-handle RPC requests for a large number of consuming subscribers, it is
-unavoidable for Tendermint development to require expertise in concurrency
-design, especially when it comes to the reactor design, and also for RPC
-request handling.
-
-
-# Guidelines
-
-Here are some guidelines for designing for (sufficient) performance and concurrency:
-
-* Mutex locks are cheap enough when there isn't contention.
-* Do not optimize code without analytical or observed proof that it is in a hot path.
-* Don't over-use channels when mutex locks w/ encapsulation are sufficient.
-* The need to drain channels are often a hint of unconsidered edge cases.
-* The creation of O(N) one-off goroutines is generally technical debt that
-   needs to get addressed sooner than later.  Avoid creating too many
-goroutines as a patch around incomplete concurrency design, or at least be
-aware of the debt and do not invest in the debt.  On the other hand, Tendermint
-is designed to have a limited number of peers (e.g. 10 or 20), so the creation
-of O(C) goroutines per O(P) peers is still O(C\*P=constant).
-* Use defer statements to unlock as much as possible.  If you want to unlock sooner,
-    try to create more modular functions that do make use of defer statements.
-
-# Mantras
-
-* Premature optimization kills
-* Readability is paramount
-* Beautiful is better than fast.
-* In the face of ambiguity, refuse the temptation to guess.
-* In the face of bugs, refuse the temptation to cover the bug.
-* There should be one-- and preferably only one --obvious way to do it.

README.md

@@ -9,14 +9,14 @@ Or [Blockchain](<https://en.wikipedia.org/wiki/Blockchain_(database)>), for shor
 [![version](https://img.shields.io/github/tag/tendermint/tendermint.svg)](https://github.com/tendermint/tendermint/releases/latest)
 [![API Reference](https://camo.githubusercontent.com/915b7be44ada53c290eb157634330494ebe3e30a/68747470733a2f2f676f646f632e6f72672f6769746875622e636f6d2f676f6c616e672f6764646f3f7374617475732e737667)](https://pkg.go.dev/github.com/tendermint/tendermint)
 [![Go version](https://img.shields.io/badge/go-1.15-blue.svg)](https://github.com/moovweb/gvm)
-[![Discord chat](https://img.shields.io/discord/669268347736686612.svg)](https://discord.gg/AzefAFd)
+[![Discord chat](https://img.shields.io/discord/669268347736686612.svg)](https://discord.gg/vcExX9T)
 [![license](https://img.shields.io/github/license/tendermint/tendermint.svg)](https://github.com/tendermint/tendermint/blob/master/LICENSE)
 [![tendermint/tendermint](https://tokei.rs/b1/github/tendermint/tendermint?category=lines)](https://github.com/tendermint/tendermint)
 [![Sourcegraph](https://sourcegraph.com/github.com/tendermint/tendermint/-/badge.svg)](https://sourcegraph.com/github.com/tendermint/tendermint?badge)
 
-| Branch | Tests                                                                                                                                                                                                                                                  | Coverage                                                                                                                             | Linting                                                                    |
-| ------ | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------- |
-| master | [![CircleCI](https://circleci.com/gh/tendermint/tendermint/tree/master.svg?style=shield)](https://circleci.com/gh/tendermint/tendermint/tree/master) </br> ![Tests](https://github.com/tendermint/tendermint/workflows/Tests/badge.svg?branch=master) | [![codecov](https://codecov.io/gh/tendermint/tendermint/branch/master/graph/badge.svg)](https://codecov.io/gh/tendermint/tendermint) | ![Lint](https://github.com/tendermint/tendermint/workflows/Lint/badge.svg) |
+| Branch | Tests                                                                                      | Coverage                                                                                                                             | Linting                                                                    |
+|--------|--------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------|
+| master | ![Tests](https://github.com/tendermint/tendermint/workflows/Tests/badge.svg?branch=master) | [![codecov](https://codecov.io/gh/tendermint/tendermint/branch/master/graph/badge.svg)](https://codecov.io/gh/tendermint/tendermint) | ![Lint](https://github.com/tendermint/tendermint/workflows/Lint/badge.svg) |
 
 Tendermint Core is Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine - written in any programming language -
 and securely replicates it on many machines.
@@ -36,13 +36,13 @@ However, we are still making breaking changes to the protocol and the APIs and h
 See below for more details about [versioning](#versioning).
 
 In any case, if you intend to run Tendermint in production, we're happy to help. You can
-contact us [over email](mailto:hello@interchain.berlin) or [join the chat](https://discord.gg/AzefAFd).
+contact us [over email](mailto:hello@interchain.berlin) or [join the chat](https://discord.gg/vcExX9T).
 
 ## Security
 
 To report a security vulnerability, see our [bug bounty
 program](https://hackerone.com/tendermint). 
-For examples of the kinds of bugs we're looking for, see [our security policy](SECURITY.md)
+For examples of the kinds of bugs we're looking for, see [our security policy](SECURITY.md).
 
 We also maintain a dedicated mailing list for security updates. We will only ever use this mailing list
 to notify you of vulnerabilities and fixes in Tendermint Core. You can subscribe [here](http://eepurl.com/gZ5hQD).
@@ -50,7 +50,7 @@ to notify you of vulnerabilities and fixes in Tendermint Core. You can subscribe
 ## Minimum requirements
 
 | Requirement | Notes            |
-| ----------- | ---------------- |
+|-------------|------------------|
 | Go version  | Go1.15 or higher |
 
 ## Documentation
@@ -96,7 +96,6 @@ CHANGELOG even if they don't lead to MINOR version bumps:
 - crypto
 - config
 - libs
-    - bech32
     - bits
     - bytes
     - json
@@ -158,4 +157,14 @@ Additional tooling can be found in [/docs/tools](/docs/tools).
 - [The latest gossip on BFT consensus](https://arxiv.org/abs/1807.04938)
 - [Master's Thesis on Tendermint](https://atrium.lib.uoguelph.ca/xmlui/handle/10214/9769)
 - [Original Whitepaper: "Tendermint: Consensus Without Mining"](https://tendermint.com/static/docs/tendermint.pdf)
-- [Blog](https://blog.cosmos.network/tendermint/home)
+- [Tendermint Core Blog](https://medium.com/tendermint/tagged/tendermint-core)
+- [Cosmos Blog](https://blog.cosmos.network/tendermint/home)
+
+## Join us!
+
+Tendermint Core is maintained by [Interchain GmbH](https://interchain.berlin).
+If you'd like to work full-time on Tendermint Core, [we're hiring](https://interchain-gmbh.breezy.hr/p/682fb7e8a6f601-software-engineer-tendermint-core)!
+
+Funding for Tendermint Core development comes primarily from the [Interchain Foundation](https://interchain.io),
+a Swiss non-profit. The Tendermint trademark is owned by [Tendermint Inc.](https://tendermint.com), the for-profit entity
+ that also maintains [tendermint.com](https://tendermint.com).

UPGRADING.md

@@ -2,13 +2,43 @@
 
 This guide provides instructions for upgrading to specific versions of Tendermint Core.
 
+## Unreleased
+
+### ABCI Changes
+
+* Added `AbciVersion` to `RequestInfo`. Applications should check that the ABCI version they expect is being used in order to avoid unimplemented changes errors.
+
+* The method `SetOption` has been removed from the ABCI.Client interface. This feature was used in the early ABCI implementation's.
+
+* Messages are written to a byte stream using uin64 length delimiters instead of int64.
+
+### Config Changes
+
+* `fast_sync = "v1"` is no longer supported. Please use `v2` instead.
+
+* All config parameters are now hyphen-case (also known as kebab-case) instead of snake_case. Before restarting the node make sure
+  you have updated all the variables in your `config.toml` file. 
+
+### CLI Changes
+
+* If you had previously used `tendermint gen_node_key` to generate a new node
+  key, keep in mind that it no longer saves the output to a file. You can use
+  `tendermint init` or pipe the output of `tendermint gen_node_key` to
+  `$TMHOME/config/node_key.json`:
+
+  ```
+  $ tendermint gen_node_key > $TMHOME/config/node_key.json
+  ```
+
+* CLI commands and flags are all now hyphen-case instead of snake_case. 
+  Make sure to adjust any scripts that calls a cli command with snake_casing
 ## v0.34.0
 
 **Upgrading to Tendermint 0.34 requires a blockchain restart.**
 This release is not compatible with previous blockchains due to changes to
 the encoding format (see "Protocol Buffers," below) and the block header (see "Blockchain Protocol").
 
-Note also that Tendermint 0.34 also requires Go 1.15 or higher. 
+Note also that Tendermint 0.34 also requires Go 1.15 or higher.
 
 ### ABCI Changes
 
@@ -42,6 +72,8 @@ Note also that Tendermint 0.34 also requires Go 1.15 or higher.
 * The field `Proof`, on the ABCI type `ResponseQuery`, is now named `ProofOps`.
   For more, see "Crypto," below.
 
+* The method `SetOption` has been removed from the ABCI.Client interface. This feature was used in the early ABCI implementation's.
+
 ### P2P Protocol
 
 The default codec is now proto3, not amino. The schema files can be found in the `/proto`
@@ -49,12 +81,9 @@ directory. For more, see "Protobuf," below.
 
 ### Blockchain Protocol
 
-* `Header#LastResultsHash` previously was the root hash of a Merkle tree built from `ResponseDeliverTx(Code, Data)` responses.
-  As of 0.34,`Header#LastResultsHash` is now the root hash of a Merkle tree built from:
-    * `BeginBlock#Events`
-    * Root hash of a Merkle tree built from `ResponseDeliverTx(Code, Data,
-      GasWanted, GasUsed, Events)` responses
-    * `BeginBlock#Events`
+* `Header#LastResultsHash`, which is the root hash of a Merkle tree built from
+`ResponseDeliverTx(Code, Data)` as of v0.34 also includes `GasWanted` and `GasUsed`
+fields.
 
 * Merkle hashes of empty trees previously returned nothing, but now return the hash of an empty input,
   to conform with [RFC-6962](https://tools.ietf.org/html/rfc6962).
@@ -112,7 +141,7 @@ Tendermint 0.34 includes new and updated consensus parameters.
 
 #### Evidence Parameters
 
-* `MaxBytes`, which caps the total amount of evidence. The default is 1048576 (1 MB). 
+* `MaxBytes`, which caps the total amount of evidence. The default is 1048576 (1 MB).
 
 ### Crypto
 
@@ -158,6 +187,7 @@ Other user-relevant changes include:
 * The `Verifier` was broken up into two pieces:
     * Core verification logic (pure `VerifyX` functions)
     * `Client` object, which represents the complete light client
+* The new light clients stores headers & validator sets as `LightBlock`s
 * The RPC client can be found in the `/rpc` directory.
 * The HTTP(S) proxy is located in the `/proxy` directory.
 
@@ -188,7 +218,7 @@ blockchains, we recommend that you check the chain ID.
 
 ### Version
 
-Version is now set through Go linker flags `ld_flags`. Applications that are using tendermint as a library should set this at compile time. 
+Version is now set through Go linker flags `ld_flags`. Applications that are using tendermint as a library should set this at compile time.
 
 Example:
 
@@ -196,7 +226,7 @@ Example:
 go install -mod=readonly -ldflags "-X github.com/tendermint/tendermint/version.TMCoreSemVer=$(go list -m github.com/tendermint/tendermint | sed  's/ /\@/g') -s -w " -trimpath ./cmd
 ```
 
-Additionally, the exported constant `version.Version` is now `version.TMCoreSemVer`. 
+Additionally, the exported constant `version.Version` is now `version.TMCoreSemVer`.
 
 ## v0.33.4
 

Vagrantfile

@@ -1,66 +0,0 @@
-# -*- mode: ruby -*-
-# vi: set ft=ruby :
-
-Vagrant.configure("2") do |config|
-  config.vm.box = "ubuntu/focal64"
-
-  config.vm.provider "virtualbox" do |v|
-    v.memory = 4096
-    v.cpus = 2
-  end
-
-  config.vm.provision "shell", inline: <<-SHELL
-    apt-get update
-
-    # install base requirements
-    apt-get install -y --no-install-recommends wget curl jq zip \
-        make shellcheck bsdmainutils psmisc
-    apt-get install -y language-pack-en
-
-    # install docker
-    apt-get install -y --no-install-recommends apt-transport-https \
-      ca-certificates \
-      curl \
-      gnupg-agent \
-      software-properties-common
-    curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add -
-    add-apt-repository \
-      "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
-      $(lsb_release -cs) \
-      stable"
-    apt-get update
-    apt-get install -y docker-ce
-    usermod -aG docker vagrant
-
-    # install go
-    wget -q https://dl.google.com/go/go1.15.linux-amd64.tar.gz
-    tar -xvf go1.15.linux-amd64.tar.gz
-    mv go /usr/local
-    rm -f go1.15.linux-amd64.tar.gz
-
-    # install nodejs (for docs)
-    curl -sL https://deb.nodesource.com/setup_11.x | bash -
-    apt-get install -y nodejs
-
-    # cleanup
-    apt-get autoremove -y
-
-    # set env variables
-    echo 'export GOROOT=/usr/local/go' >> /home/vagrant/.bash_profile
-    echo 'export GOPATH=/home/vagrant/go' >> /home/vagrant/.bash_profile
-    echo 'export PATH=$PATH:$GOROOT/bin:$GOPATH/bin' >> /home/vagrant/.bash_profile
-    echo 'export LC_ALL=en_US.UTF-8' >> /home/vagrant/.bash_profile
-    echo 'cd go/src/github.com/tendermint/tendermint' >> /home/vagrant/.bash_profile
-
-    mkdir -p /home/vagrant/go/bin
-    mkdir -p /home/vagrant/go/src/github.com/tendermint
-    ln -s /vagrant /home/vagrant/go/src/github.com/tendermint/tendermint
-
-    chown -R vagrant:vagrant /home/vagrant/go
-    chown vagrant:vagrant /home/vagrant/.bash_profile
-
-    # get all deps and tools, ready to install/test
-    su - vagrant  -c 'source /home/vagrant/.bash_profile'
-    su - vagrant -c 'cd /home/vagrant/go/src/github.com/tendermint/tendermint && make tools'
-  SHELL
-end

abci/README.md

@@ -20,7 +20,7 @@ To get up and running quickly, see the [getting started guide](../docs/app-dev/g
 A detailed description of the ABCI methods and message types is contained in:
 
 - [The main spec](https://github.com/tendermint/spec/blob/master/spec/abci/abci.md)
-- [A protobuf file](./types/types.proto)
+- [A protobuf file](../proto/tendermint/abci/types.proto)
 - [A Go interface](./types/application.go)
 
 ## Protocol Buffers

abci/client/client.go

@@ -1,6 +1,7 @@
 package abcicli
 
 import (
+	"context"
 	"fmt"
 	"sync"
 
@@ -14,48 +15,53 @@ const (
 	echoRetryIntervalSeconds = 1
 )
 
+//go:generate mockery --case underscore --name Client
+
 // Client defines an interface for an ABCI client.
-// All `Async` methods return a `ReqRes` object.
+//
+// All `Async` methods return a `ReqRes` object and an error.
 // All `Sync` methods return the appropriate protobuf ResponseXxx struct and an error.
-// Note these are client errors, eg. ABCI socket connectivity issues.
-// Application-related errors are reflected in response via ABCI error codes and logs.
+//
+// NOTE these are client errors, eg. ABCI socket connectivity issues.
+// Application-related errors are reflected in response via ABCI error codes
+// and logs.
 type Client interface {
 	service.Service
 
 	SetResponseCallback(Callback)
 	Error() error
 
-	FlushAsync() *ReqRes
-	EchoAsync(msg string) *ReqRes
-	InfoAsync(types.RequestInfo) *ReqRes
-	SetOptionAsync(types.RequestSetOption) *ReqRes
-	DeliverTxAsync(types.RequestDeliverTx) *ReqRes
-	CheckTxAsync(types.RequestCheckTx) *ReqRes
-	QueryAsync(types.RequestQuery) *ReqRes
-	CommitAsync() *ReqRes
-	InitChainAsync(types.RequestInitChain) *ReqRes
-	BeginBlockAsync(types.RequestBeginBlock) *ReqRes
-	EndBlockAsync(types.RequestEndBlock) *ReqRes
-	ListSnapshotsAsync(types.RequestListSnapshots) *ReqRes
-	OfferSnapshotAsync(types.RequestOfferSnapshot) *ReqRes
-	LoadSnapshotChunkAsync(types.RequestLoadSnapshotChunk) *ReqRes
-	ApplySnapshotChunkAsync(types.RequestApplySnapshotChunk) *ReqRes
+	// Asynchronous requests
+	FlushAsync(context.Context) (*ReqRes, error)
+	EchoAsync(ctx context.Context, msg string) (*ReqRes, error)
+	InfoAsync(context.Context, types.RequestInfo) (*ReqRes, error)
+	DeliverTxAsync(context.Context, types.RequestDeliverTx) (*ReqRes, error)
+	CheckTxAsync(context.Context, types.RequestCheckTx) (*ReqRes, error)
+	QueryAsync(context.Context, types.RequestQuery) (*ReqRes, error)
+	CommitAsync(context.Context) (*ReqRes, error)
+	InitChainAsync(context.Context, types.RequestInitChain) (*ReqRes, error)
+	BeginBlockAsync(context.Context, types.RequestBeginBlock) (*ReqRes, error)
+	EndBlockAsync(context.Context, types.RequestEndBlock) (*ReqRes, error)
+	ListSnapshotsAsync(context.Context, types.RequestListSnapshots) (*ReqRes, error)
+	OfferSnapshotAsync(context.Context, types.RequestOfferSnapshot) (*ReqRes, error)
+	LoadSnapshotChunkAsync(context.Context, types.RequestLoadSnapshotChunk) (*ReqRes, error)
+	ApplySnapshotChunkAsync(context.Context, types.RequestApplySnapshotChunk) (*ReqRes, error)
 
-	FlushSync() error
-	EchoSync(msg string) (*types.ResponseEcho, error)
-	InfoSync(types.RequestInfo) (*types.ResponseInfo, error)
-	SetOptionSync(types.RequestSetOption) (*types.ResponseSetOption, error)
-	DeliverTxSync(types.RequestDeliverTx) (*types.ResponseDeliverTx, error)
-	CheckTxSync(types.RequestCheckTx) (*types.ResponseCheckTx, error)
-	QuerySync(types.RequestQuery) (*types.ResponseQuery, error)
-	CommitSync() (*types.ResponseCommit, error)
-	InitChainSync(types.RequestInitChain) (*types.ResponseInitChain, error)
-	BeginBlockSync(types.RequestBeginBlock) (*types.ResponseBeginBlock, error)
-	EndBlockSync(types.RequestEndBlock) (*types.ResponseEndBlock, error)
-	ListSnapshotsSync(types.RequestListSnapshots) (*types.ResponseListSnapshots, error)
-	OfferSnapshotSync(types.RequestOfferSnapshot) (*types.ResponseOfferSnapshot, error)
-	LoadSnapshotChunkSync(types.RequestLoadSnapshotChunk) (*types.ResponseLoadSnapshotChunk, error)
-	ApplySnapshotChunkSync(types.RequestApplySnapshotChunk) (*types.ResponseApplySnapshotChunk, error)
+	// Synchronous requests
+	FlushSync(context.Context) error
+	EchoSync(ctx context.Context, msg string) (*types.ResponseEcho, error)
+	InfoSync(context.Context, types.RequestInfo) (*types.ResponseInfo, error)
+	DeliverTxSync(context.Context, types.RequestDeliverTx) (*types.ResponseDeliverTx, error)
+	CheckTxSync(context.Context, types.RequestCheckTx) (*types.ResponseCheckTx, error)
+	QuerySync(context.Context, types.RequestQuery) (*types.ResponseQuery, error)
+	CommitSync(context.Context) (*types.ResponseCommit, error)
+	InitChainSync(context.Context, types.RequestInitChain) (*types.ResponseInitChain, error)
+	BeginBlockSync(context.Context, types.RequestBeginBlock) (*types.ResponseBeginBlock, error)
+	EndBlockSync(context.Context, types.RequestEndBlock) (*types.ResponseEndBlock, error)
+	ListSnapshotsSync(context.Context, types.RequestListSnapshots) (*types.ResponseListSnapshots, error)
+	OfferSnapshotSync(context.Context, types.RequestOfferSnapshot) (*types.ResponseOfferSnapshot, error)
+	LoadSnapshotChunkSync(context.Context, types.RequestLoadSnapshotChunk) (*types.ResponseLoadSnapshotChunk, error)
+	ApplySnapshotChunkSync(context.Context, types.RequestApplySnapshotChunk) (*types.ResponseApplySnapshotChunk, error)
 }
 
 //----------------------------------------
@@ -74,8 +80,12 @@ func NewClient(addr, transport string, mustConnect bool) (client Client, err err
 	return
 }
 
+//----------------------------------------
+
 type Callback func(*types.Request, *types.Response)
 
+//----------------------------------------
+
 type ReqRes struct {
 	*types.Request
 	*sync.WaitGroup
@@ -97,50 +107,34 @@ func NewReqRes(req *types.Request) *ReqRes {
 	}
 }
 
-// Sets sets the callback. If reqRes is already done, it will call the cb
-// immediately. Note, reqRes.cb should not change if reqRes.done and only one
-// callback is supported.
-func (r *ReqRes) SetCallback(cb func(res *types.Response)) {
-	r.mtx.Lock()
+// Sets the callback for this ReqRes atomically.
+// If reqRes is already done, calls cb immediately.
+// NOTE: reqRes.cb should not change if reqRes.done.
+// NOTE: only one callback is supported.
+func (reqRes *ReqRes) SetCallback(cb func(res *types.Response)) {
+	reqRes.mtx.Lock()
 
-	if r.done {
-		r.mtx.Unlock()
-		cb(r.Response)
+	if reqRes.done {
+		reqRes.mtx.Unlock()
+		cb(reqRes.Response)
 		return
 	}
 
-	r.cb = cb
-	r.mtx.Unlock()
+	reqRes.cb = cb
+	reqRes.mtx.Unlock()
 }
 
-// InvokeCallback invokes a thread-safe execution of the configured callback
-// if non-nil.
-func (r *ReqRes) InvokeCallback() {
-	r.mtx.Lock()
-	defer r.mtx.Unlock()
-
-	if r.cb != nil {
-		r.cb(r.Response)
-	}
+func (reqRes *ReqRes) GetCallback() func(*types.Response) {
+	reqRes.mtx.Lock()
+	defer reqRes.mtx.Unlock()
+	return reqRes.cb
 }
 
-// GetCallback returns the configured callback of the ReqRes object which may be
-// nil. Note, it is not safe to concurrently call this in cases where it is
-// marked done and SetCallback is called before calling GetCallback as that
-// will invoke the callback twice and create a potential race condition.
-//
-// ref: https://github.com/tendermint/tendermint/issues/5439
-func (r *ReqRes) GetCallback() func(*types.Response) {
-	r.mtx.Lock()
-	defer r.mtx.Unlock()
-	return r.cb
-}
-
-// SetDone marks the ReqRes object as done.
-func (r *ReqRes) SetDone() {
-	r.mtx.Lock()
-	r.done = true
-	r.mtx.Unlock()
+// NOTE: it should be safe to read reqRes.cb without locks after this.
+func (reqRes *ReqRes) SetDone() {
+	reqRes.mtx.Lock()
+	reqRes.done = true
+	reqRes.mtx.Unlock()
 }
 
 func waitGroup1() (wg *sync.WaitGroup) {

abci/client/doc.go

@@ -0,0 +1,29 @@
+// Package abcicli provides an ABCI implementation in Go.
+//
+// There are 3 clients available:
+//		1. socket (unix or TCP)
+//		2. local (in memory)
+//		3. gRPC
+//
+// ## Socket client
+//
+// async: the client maintains an internal buffer of a fixed size. when the
+// buffer becomes full, all Async calls will return an error immediately.
+//
+// sync: the client blocks on 1) enqueuing the Sync request 2) enqueuing the
+// Flush requests 3) waiting for the Flush response
+//
+// ## Local client
+//
+// async: global mutex is locked during each call (meaning it's not really async!)
+// sync: global mutex is locked during each call
+//
+// ## gRPC client
+//
+// async: gRPC is synchronous, but an internal buffer of a fixed size is used
+// to store responses and later call callbacks (separate goroutine per
+// response).
+//
+// sync: waits for all Async calls to complete (essentially what Flush does in
+// the socket client) and calls Sync method.
+package abcicli

abci/client/grpc_client.go

@@ -1,12 +1,12 @@
 package abcicli
 
 import (
+	"context"
 	"fmt"
 	"net"
 	"sync"
 	"time"
 
-	"golang.org/x/net/context"
 	"google.golang.org/grpc"
 
 	"github.com/tendermint/tendermint/abci/types"
@@ -15,10 +15,7 @@ import (
 	tmsync "github.com/tendermint/tendermint/libs/sync"
 )
 
-var _ Client = (*grpcClient)(nil)
-
-// A stripped copy of the remoteClient that makes
-// synchronous calls using grpc
+// A gRPC client.
 type grpcClient struct {
 	service.BaseService
 	mustConnect bool
@@ -33,6 +30,18 @@ type grpcClient struct {
 	resCb func(*types.Request, *types.Response) // listens to all callbacks
 }
 
+var _ Client = (*grpcClient)(nil)
+
+// NewGRPCClient creates a gRPC client, which will connect to addr upon the
+// start. Note Client#Start returns an error if connection is unsuccessful and
+// mustConnect is true.
+//
+// GRPC calls are synchronous, but some callbacks expect to be called
+// asynchronously (eg. the mempool expects to be able to lock to remove bad txs
+// from cache). To accommodate, we finish each call in its own go-routine,
+// which is expensive, but easy - if you want something better, use the socket
+// protocol! maybe one day, if people really want it, we use grpc streams, but
+// hopefully not :D
 func NewGRPCClient(addr string, mustConnect bool) Client {
 	cli := &grpcClient{
 		addr:        addr,
@@ -54,10 +63,6 @@ func dialerFunc(ctx context.Context, addr string) (net.Conn, error) {
 }
 
 func (cli *grpcClient) OnStart() error {
-	if err := cli.BaseService.OnStart(); err != nil {
-		return err
-	}
-
 	// This processes asynchronous request/response messages and dispatches
 	// them to callbacks.
 	go func() {
@@ -120,8 +125,6 @@ RETRY_LOOP:
 }
 
 func (cli *grpcClient) OnStop() {
-	cli.BaseService.OnStop()
-
 	if cli.conn != nil {
 		cli.conn.Close()
 	}
@@ -160,155 +163,168 @@ func (cli *grpcClient) SetResponseCallback(resCb Callback) {
 }
 
 //----------------------------------------
-// GRPC calls are synchronous, but some callbacks expect to be called asynchronously
-// (eg. the mempool expects to be able to lock to remove bad txs from cache).
-// To accommodate, we finish each call in its own go-routine,
-// which is expensive, but easy - if you want something better, use the socket protocol!
-// maybe one day, if people really want it, we use grpc streams,
-// but hopefully not :D
 
-func (cli *grpcClient) EchoAsync(msg string) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) EchoAsync(ctx context.Context, msg string) (*ReqRes, error) {
 	req := types.ToRequestEcho(msg)
-	res, err := cli.client.Echo(context.Background(), req.GetEcho(), grpc.WaitForReady(true))
+	res, err := cli.client.Echo(ctx, req.GetEcho(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_Echo{Echo: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_Echo{Echo: res}})
 }
 
-func (cli *grpcClient) FlushAsync() *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) FlushAsync(ctx context.Context) (*ReqRes, error) {
 	req := types.ToRequestFlush()
-	res, err := cli.client.Flush(context.Background(), req.GetFlush(), grpc.WaitForReady(true))
+	res, err := cli.client.Flush(ctx, req.GetFlush(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_Flush{Flush: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_Flush{Flush: res}})
 }
 
-func (cli *grpcClient) InfoAsync(params types.RequestInfo) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) InfoAsync(ctx context.Context, params types.RequestInfo) (*ReqRes, error) {
 	req := types.ToRequestInfo(params)
-	res, err := cli.client.Info(context.Background(), req.GetInfo(), grpc.WaitForReady(true))
+	res, err := cli.client.Info(ctx, req.GetInfo(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_Info{Info: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_Info{Info: res}})
 }
 
-func (cli *grpcClient) SetOptionAsync(params types.RequestSetOption) *ReqRes {
-	req := types.ToRequestSetOption(params)
-	res, err := cli.client.SetOption(context.Background(), req.GetSetOption(), grpc.WaitForReady(true))
-	if err != nil {
-		cli.StopForError(err)
-	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_SetOption{SetOption: res}})
-}
-
-func (cli *grpcClient) DeliverTxAsync(params types.RequestDeliverTx) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) DeliverTxAsync(ctx context.Context, params types.RequestDeliverTx) (*ReqRes, error) {
 	req := types.ToRequestDeliverTx(params)
-	res, err := cli.client.DeliverTx(context.Background(), req.GetDeliverTx(), grpc.WaitForReady(true))
+	res, err := cli.client.DeliverTx(ctx, req.GetDeliverTx(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_DeliverTx{DeliverTx: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_DeliverTx{DeliverTx: res}})
 }
 
-func (cli *grpcClient) CheckTxAsync(params types.RequestCheckTx) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) CheckTxAsync(ctx context.Context, params types.RequestCheckTx) (*ReqRes, error) {
 	req := types.ToRequestCheckTx(params)
-	res, err := cli.client.CheckTx(context.Background(), req.GetCheckTx(), grpc.WaitForReady(true))
+	res, err := cli.client.CheckTx(ctx, req.GetCheckTx(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_CheckTx{CheckTx: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_CheckTx{CheckTx: res}})
 }
 
-func (cli *grpcClient) QueryAsync(params types.RequestQuery) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) QueryAsync(ctx context.Context, params types.RequestQuery) (*ReqRes, error) {
 	req := types.ToRequestQuery(params)
-	res, err := cli.client.Query(context.Background(), req.GetQuery(), grpc.WaitForReady(true))
+	res, err := cli.client.Query(ctx, req.GetQuery(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_Query{Query: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_Query{Query: res}})
 }
 
-func (cli *grpcClient) CommitAsync() *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) CommitAsync(ctx context.Context) (*ReqRes, error) {
 	req := types.ToRequestCommit()
-	res, err := cli.client.Commit(context.Background(), req.GetCommit(), grpc.WaitForReady(true))
+	res, err := cli.client.Commit(ctx, req.GetCommit(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_Commit{Commit: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_Commit{Commit: res}})
 }
 
-func (cli *grpcClient) InitChainAsync(params types.RequestInitChain) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) InitChainAsync(ctx context.Context, params types.RequestInitChain) (*ReqRes, error) {
 	req := types.ToRequestInitChain(params)
-	res, err := cli.client.InitChain(context.Background(), req.GetInitChain(), grpc.WaitForReady(true))
+	res, err := cli.client.InitChain(ctx, req.GetInitChain(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_InitChain{InitChain: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_InitChain{InitChain: res}})
 }
 
-func (cli *grpcClient) BeginBlockAsync(params types.RequestBeginBlock) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) BeginBlockAsync(ctx context.Context, params types.RequestBeginBlock) (*ReqRes, error) {
 	req := types.ToRequestBeginBlock(params)
-	res, err := cli.client.BeginBlock(context.Background(), req.GetBeginBlock(), grpc.WaitForReady(true))
+	res, err := cli.client.BeginBlock(ctx, req.GetBeginBlock(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_BeginBlock{BeginBlock: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_BeginBlock{BeginBlock: res}})
 }
 
-func (cli *grpcClient) EndBlockAsync(params types.RequestEndBlock) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) EndBlockAsync(ctx context.Context, params types.RequestEndBlock) (*ReqRes, error) {
 	req := types.ToRequestEndBlock(params)
-	res, err := cli.client.EndBlock(context.Background(), req.GetEndBlock(), grpc.WaitForReady(true))
+	res, err := cli.client.EndBlock(ctx, req.GetEndBlock(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_EndBlock{EndBlock: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_EndBlock{EndBlock: res}})
 }
 
-func (cli *grpcClient) ListSnapshotsAsync(params types.RequestListSnapshots) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) ListSnapshotsAsync(ctx context.Context, params types.RequestListSnapshots) (*ReqRes, error) {
 	req := types.ToRequestListSnapshots(params)
-	res, err := cli.client.ListSnapshots(context.Background(), req.GetListSnapshots(), grpc.WaitForReady(true))
+	res, err := cli.client.ListSnapshots(ctx, req.GetListSnapshots(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_ListSnapshots{ListSnapshots: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_ListSnapshots{ListSnapshots: res}})
 }
 
-func (cli *grpcClient) OfferSnapshotAsync(params types.RequestOfferSnapshot) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) OfferSnapshotAsync(ctx context.Context, params types.RequestOfferSnapshot) (*ReqRes, error) {
 	req := types.ToRequestOfferSnapshot(params)
-	res, err := cli.client.OfferSnapshot(context.Background(), req.GetOfferSnapshot(), grpc.WaitForReady(true))
+	res, err := cli.client.OfferSnapshot(ctx, req.GetOfferSnapshot(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_OfferSnapshot{OfferSnapshot: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_OfferSnapshot{OfferSnapshot: res}})
 }
 
-func (cli *grpcClient) LoadSnapshotChunkAsync(params types.RequestLoadSnapshotChunk) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) LoadSnapshotChunkAsync(
+	ctx context.Context,
+	params types.RequestLoadSnapshotChunk,
+) (*ReqRes, error) {
 	req := types.ToRequestLoadSnapshotChunk(params)
-	res, err := cli.client.LoadSnapshotChunk(context.Background(), req.GetLoadSnapshotChunk(), grpc.WaitForReady(true))
+	res, err := cli.client.LoadSnapshotChunk(ctx, req.GetLoadSnapshotChunk(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_LoadSnapshotChunk{LoadSnapshotChunk: res}})
+	return cli.finishAsyncCall(ctx, req, &types.Response{Value: &types.Response_LoadSnapshotChunk{LoadSnapshotChunk: res}})
 }
 
-func (cli *grpcClient) ApplySnapshotChunkAsync(params types.RequestApplySnapshotChunk) *ReqRes {
+// NOTE: call is synchronous, use ctx to break early if needed
+func (cli *grpcClient) ApplySnapshotChunkAsync(
+	ctx context.Context,
+	params types.RequestApplySnapshotChunk,
+) (*ReqRes, error) {
 	req := types.ToRequestApplySnapshotChunk(params)
-	res, err := cli.client.ApplySnapshotChunk(context.Background(), req.GetApplySnapshotChunk(), grpc.WaitForReady(true))
+	res, err := cli.client.ApplySnapshotChunk(ctx, req.GetApplySnapshotChunk(), grpc.WaitForReady(true))
 	if err != nil {
-		cli.StopForError(err)
+		return nil, err
 	}
-	return cli.finishAsyncCall(req, &types.Response{Value: &types.Response_ApplySnapshotChunk{ApplySnapshotChunk: res}})
+	return cli.finishAsyncCall(
+		ctx,
+		req,
+		&types.Response{Value: &types.Response_ApplySnapshotChunk{ApplySnapshotChunk: res}},
+	)
 }
 
 // finishAsyncCall creates a ReqRes for an async call, and immediately populates it
 // with the response. We don't complete it until it's been ordered via the channel.
-func (cli *grpcClient) finishAsyncCall(req *types.Request, res *types.Response) *ReqRes {
+func (cli *grpcClient) finishAsyncCall(ctx context.Context, req *types.Request, res *types.Response) (*ReqRes, error) {
 	reqres := NewReqRes(req)
 	reqres.Response = res
-	cli.chReqRes <- reqres // use channel for async responses, since they must be ordered
-	return reqres
+	select {
+	case cli.chReqRes <- reqres: // use channel for async responses, since they must be ordered
+		return reqres, nil
+	case <-ctx.Done():
+		return nil, ctx.Err()
+	}
 }
 
 // finishSyncCall waits for an async call to complete. It is necessary to call all
@@ -341,79 +357,150 @@ func (cli *grpcClient) finishSyncCall(reqres *ReqRes) *types.Response {
 
 //----------------------------------------
 
-func (cli *grpcClient) FlushSync() error {
+func (cli *grpcClient) FlushSync(ctx context.Context) error {
 	return nil
 }
 
-func (cli *grpcClient) EchoSync(msg string) (*types.ResponseEcho, error) {
-	reqres := cli.EchoAsync(msg)
-	// StopForError should already have been called if error is set
+func (cli *grpcClient) EchoSync(ctx context.Context, msg string) (*types.ResponseEcho, error) {
+	reqres, err := cli.EchoAsync(ctx, msg)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetEcho(), cli.Error()
 }
 
-func (cli *grpcClient) InfoSync(req types.RequestInfo) (*types.ResponseInfo, error) {
-	reqres := cli.InfoAsync(req)
+func (cli *grpcClient) InfoSync(
+	ctx context.Context,
+	req types.RequestInfo,
+) (*types.ResponseInfo, error) {
+	reqres, err := cli.InfoAsync(ctx, req)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetInfo(), cli.Error()
 }
 
-func (cli *grpcClient) SetOptionSync(req types.RequestSetOption) (*types.ResponseSetOption, error) {
-	reqres := cli.SetOptionAsync(req)
-	return reqres.Response.GetSetOption(), cli.Error()
-}
+func (cli *grpcClient) DeliverTxSync(
+	ctx context.Context,
+	params types.RequestDeliverTx,
+) (*types.ResponseDeliverTx, error) {
 
-func (cli *grpcClient) DeliverTxSync(params types.RequestDeliverTx) (*types.ResponseDeliverTx, error) {
-	reqres := cli.DeliverTxAsync(params)
+	reqres, err := cli.DeliverTxAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetDeliverTx(), cli.Error()
 }
 
-func (cli *grpcClient) CheckTxSync(params types.RequestCheckTx) (*types.ResponseCheckTx, error) {
-	reqres := cli.CheckTxAsync(params)
+func (cli *grpcClient) CheckTxSync(
+	ctx context.Context,
+	params types.RequestCheckTx,
+) (*types.ResponseCheckTx, error) {
+
+	reqres, err := cli.CheckTxAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetCheckTx(), cli.Error()
 }
 
-func (cli *grpcClient) QuerySync(req types.RequestQuery) (*types.ResponseQuery, error) {
-	reqres := cli.QueryAsync(req)
+func (cli *grpcClient) QuerySync(
+	ctx context.Context,
+	req types.RequestQuery,
+) (*types.ResponseQuery, error) {
+	reqres, err := cli.QueryAsync(ctx, req)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetQuery(), cli.Error()
 }
 
-func (cli *grpcClient) CommitSync() (*types.ResponseCommit, error) {
-	reqres := cli.CommitAsync()
+func (cli *grpcClient) CommitSync(ctx context.Context) (*types.ResponseCommit, error) {
+	reqres, err := cli.CommitAsync(ctx)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetCommit(), cli.Error()
 }
 
-func (cli *grpcClient) InitChainSync(params types.RequestInitChain) (*types.ResponseInitChain, error) {
-	reqres := cli.InitChainAsync(params)
+func (cli *grpcClient) InitChainSync(
+	ctx context.Context,
+	params types.RequestInitChain,
+) (*types.ResponseInitChain, error) {
+
+	reqres, err := cli.InitChainAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetInitChain(), cli.Error()
 }
 
-func (cli *grpcClient) BeginBlockSync(params types.RequestBeginBlock) (*types.ResponseBeginBlock, error) {
-	reqres := cli.BeginBlockAsync(params)
+func (cli *grpcClient) BeginBlockSync(
+	ctx context.Context,
+	params types.RequestBeginBlock,
+) (*types.ResponseBeginBlock, error) {
+
+	reqres, err := cli.BeginBlockAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetBeginBlock(), cli.Error()
 }
 
-func (cli *grpcClient) EndBlockSync(params types.RequestEndBlock) (*types.ResponseEndBlock, error) {
-	reqres := cli.EndBlockAsync(params)
+func (cli *grpcClient) EndBlockSync(
+	ctx context.Context,
+	params types.RequestEndBlock,
+) (*types.ResponseEndBlock, error) {
+
+	reqres, err := cli.EndBlockAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetEndBlock(), cli.Error()
 }
 
-func (cli *grpcClient) ListSnapshotsSync(params types.RequestListSnapshots) (*types.ResponseListSnapshots, error) {
-	reqres := cli.ListSnapshotsAsync(params)
+func (cli *grpcClient) ListSnapshotsSync(
+	ctx context.Context,
+	params types.RequestListSnapshots,
+) (*types.ResponseListSnapshots, error) {
+
+	reqres, err := cli.ListSnapshotsAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetListSnapshots(), cli.Error()
 }
 
-func (cli *grpcClient) OfferSnapshotSync(params types.RequestOfferSnapshot) (*types.ResponseOfferSnapshot, error) {
-	reqres := cli.OfferSnapshotAsync(params)
+func (cli *grpcClient) OfferSnapshotSync(
+	ctx context.Context,
+	params types.RequestOfferSnapshot,
+) (*types.ResponseOfferSnapshot, error) {
+
+	reqres, err := cli.OfferSnapshotAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetOfferSnapshot(), cli.Error()
 }
 
 func (cli *grpcClient) LoadSnapshotChunkSync(
+	ctx context.Context,
 	params types.RequestLoadSnapshotChunk) (*types.ResponseLoadSnapshotChunk, error) {
-	reqres := cli.LoadSnapshotChunkAsync(params)
+
+	reqres, err := cli.LoadSnapshotChunkAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetLoadSnapshotChunk(), cli.Error()
 }
 
 func (cli *grpcClient) ApplySnapshotChunkSync(
+	ctx context.Context,
 	params types.RequestApplySnapshotChunk) (*types.ResponseApplySnapshotChunk, error) {
-	reqres := cli.ApplySnapshotChunkAsync(params)
+
+	reqres, err := cli.ApplySnapshotChunkAsync(ctx, params)
+	if err != nil {
+		return nil, err
+	}
 	return cli.finishSyncCall(reqres).GetApplySnapshotChunk(), cli.Error()
 }

abci/client/local_client.go

@@ -1,13 +1,13 @@
 package abcicli
 
 import (
+	"context"
+
 	types "github.com/tendermint/tendermint/abci/types"
 	"github.com/tendermint/tendermint/libs/service"
 	tmsync "github.com/tendermint/tendermint/libs/sync"
 )
 
-var _ Client = (*localClient)(nil)
-
 // NOTE: use defer to unlock mutex because Application might panic (e.g., in
 // case of malicious tx or query). It only makes sense for publicly exposed
 // methods like CheckTx (/broadcast_tx_* RPC endpoint) or Query (/abci_query
@@ -49,22 +49,22 @@ func (app *localClient) Error() error {
 	return nil
 }
 
-func (app *localClient) FlushAsync() *ReqRes {
+func (app *localClient) FlushAsync(ctx context.Context) (*ReqRes, error) {
 	// Do nothing
-	return newLocalReqRes(types.ToRequestFlush(), nil)
+	return newLocalReqRes(types.ToRequestFlush(), nil), nil
 }
 
-func (app *localClient) EchoAsync(msg string) *ReqRes {
+func (app *localClient) EchoAsync(ctx context.Context, msg string) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
 	return app.callback(
 		types.ToRequestEcho(msg),
 		types.ToResponseEcho(msg),
-	)
+	), nil
 }
 
-func (app *localClient) InfoAsync(req types.RequestInfo) *ReqRes {
+func (app *localClient) InfoAsync(ctx context.Context, req types.RequestInfo) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -72,21 +72,10 @@ func (app *localClient) InfoAsync(req types.RequestInfo) *ReqRes {
 	return app.callback(
 		types.ToRequestInfo(req),
 		types.ToResponseInfo(res),
-	)
+	), nil
 }
 
-func (app *localClient) SetOptionAsync(req types.RequestSetOption) *ReqRes {
-	app.mtx.Lock()
-	defer app.mtx.Unlock()
-
-	res := app.Application.SetOption(req)
-	return app.callback(
-		types.ToRequestSetOption(req),
-		types.ToResponseSetOption(res),
-	)
-}
-
-func (app *localClient) DeliverTxAsync(params types.RequestDeliverTx) *ReqRes {
+func (app *localClient) DeliverTxAsync(ctx context.Context, params types.RequestDeliverTx) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -94,10 +83,10 @@ func (app *localClient) DeliverTxAsync(params types.RequestDeliverTx) *ReqRes {
 	return app.callback(
 		types.ToRequestDeliverTx(params),
 		types.ToResponseDeliverTx(res),
-	)
+	), nil
 }
 
-func (app *localClient) CheckTxAsync(req types.RequestCheckTx) *ReqRes {
+func (app *localClient) CheckTxAsync(ctx context.Context, req types.RequestCheckTx) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -105,10 +94,10 @@ func (app *localClient) CheckTxAsync(req types.RequestCheckTx) *ReqRes {
 	return app.callback(
 		types.ToRequestCheckTx(req),
 		types.ToResponseCheckTx(res),
-	)
+	), nil
 }
 
-func (app *localClient) QueryAsync(req types.RequestQuery) *ReqRes {
+func (app *localClient) QueryAsync(ctx context.Context, req types.RequestQuery) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -116,10 +105,10 @@ func (app *localClient) QueryAsync(req types.RequestQuery) *ReqRes {
 	return app.callback(
 		types.ToRequestQuery(req),
 		types.ToResponseQuery(res),
-	)
+	), nil
 }
 
-func (app *localClient) CommitAsync() *ReqRes {
+func (app *localClient) CommitAsync(ctx context.Context) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -127,10 +116,10 @@ func (app *localClient) CommitAsync() *ReqRes {
 	return app.callback(
 		types.ToRequestCommit(),
 		types.ToResponseCommit(res),
-	)
+	), nil
 }
 
-func (app *localClient) InitChainAsync(req types.RequestInitChain) *ReqRes {
+func (app *localClient) InitChainAsync(ctx context.Context, req types.RequestInitChain) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -138,10 +127,10 @@ func (app *localClient) InitChainAsync(req types.RequestInitChain) *ReqRes {
 	return app.callback(
 		types.ToRequestInitChain(req),
 		types.ToResponseInitChain(res),
-	)
+	), nil
 }
 
-func (app *localClient) BeginBlockAsync(req types.RequestBeginBlock) *ReqRes {
+func (app *localClient) BeginBlockAsync(ctx context.Context, req types.RequestBeginBlock) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -149,10 +138,10 @@ func (app *localClient) BeginBlockAsync(req types.RequestBeginBlock) *ReqRes {
 	return app.callback(
 		types.ToRequestBeginBlock(req),
 		types.ToResponseBeginBlock(res),
-	)
+	), nil
 }
 
-func (app *localClient) EndBlockAsync(req types.RequestEndBlock) *ReqRes {
+func (app *localClient) EndBlockAsync(ctx context.Context, req types.RequestEndBlock) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -160,10 +149,10 @@ func (app *localClient) EndBlockAsync(req types.RequestEndBlock) *ReqRes {
 	return app.callback(
 		types.ToRequestEndBlock(req),
 		types.ToResponseEndBlock(res),
-	)
+	), nil
 }
 
-func (app *localClient) ListSnapshotsAsync(req types.RequestListSnapshots) *ReqRes {
+func (app *localClient) ListSnapshotsAsync(ctx context.Context, req types.RequestListSnapshots) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -171,10 +160,10 @@ func (app *localClient) ListSnapshotsAsync(req types.RequestListSnapshots) *ReqR
 	return app.callback(
 		types.ToRequestListSnapshots(req),
 		types.ToResponseListSnapshots(res),
-	)
+	), nil
 }
 
-func (app *localClient) OfferSnapshotAsync(req types.RequestOfferSnapshot) *ReqRes {
+func (app *localClient) OfferSnapshotAsync(ctx context.Context, req types.RequestOfferSnapshot) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -182,10 +171,13 @@ func (app *localClient) OfferSnapshotAsync(req types.RequestOfferSnapshot) *ReqR
 	return app.callback(
 		types.ToRequestOfferSnapshot(req),
 		types.ToResponseOfferSnapshot(res),
-	)
+	), nil
 }
 
-func (app *localClient) LoadSnapshotChunkAsync(req types.RequestLoadSnapshotChunk) *ReqRes {
+func (app *localClient) LoadSnapshotChunkAsync(
+	ctx context.Context,
+	req types.RequestLoadSnapshotChunk,
+) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -193,10 +185,13 @@ func (app *localClient) LoadSnapshotChunkAsync(req types.RequestLoadSnapshotChun
 	return app.callback(
 		types.ToRequestLoadSnapshotChunk(req),
 		types.ToResponseLoadSnapshotChunk(res),
-	)
+	), nil
 }
 
-func (app *localClient) ApplySnapshotChunkAsync(req types.RequestApplySnapshotChunk) *ReqRes {
+func (app *localClient) ApplySnapshotChunkAsync(
+	ctx context.Context,
+	req types.RequestApplySnapshotChunk,
+) (*ReqRes, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -204,20 +199,20 @@ func (app *localClient) ApplySnapshotChunkAsync(req types.RequestApplySnapshotCh
 	return app.callback(
 		types.ToRequestApplySnapshotChunk(req),
 		types.ToResponseApplySnapshotChunk(res),
-	)
+	), nil
 }
 
 //-------------------------------------------------------
 
-func (app *localClient) FlushSync() error {
+func (app *localClient) FlushSync(ctx context.Context) error {
 	return nil
 }
 
-func (app *localClient) EchoSync(msg string) (*types.ResponseEcho, error) {
+func (app *localClient) EchoSync(ctx context.Context, msg string) (*types.ResponseEcho, error) {
 	return &types.ResponseEcho{Message: msg}, nil
 }
 
-func (app *localClient) InfoSync(req types.RequestInfo) (*types.ResponseInfo, error) {
+func (app *localClient) InfoSync(ctx context.Context, req types.RequestInfo) (*types.ResponseInfo, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -225,15 +220,11 @@ func (app *localClient) InfoSync(req types.RequestInfo) (*types.ResponseInfo, er
 	return &res, nil
 }
 
-func (app *localClient) SetOptionSync(req types.RequestSetOption) (*types.ResponseSetOption, error) {
-	app.mtx.Lock()
-	defer app.mtx.Unlock()
+func (app *localClient) DeliverTxSync(
+	ctx context.Context,
+	req types.RequestDeliverTx,
+) (*types.ResponseDeliverTx, error) {
 
-	res := app.Application.SetOption(req)
-	return &res, nil
-}
-
-func (app *localClient) DeliverTxSync(req types.RequestDeliverTx) (*types.ResponseDeliverTx, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -241,7 +232,10 @@ func (app *localClient) DeliverTxSync(req types.RequestDeliverTx) (*types.Respon
 	return &res, nil
 }
 
-func (app *localClient) CheckTxSync(req types.RequestCheckTx) (*types.ResponseCheckTx, error) {
+func (app *localClient) CheckTxSync(
+	ctx context.Context,
+	req types.RequestCheckTx,
+) (*types.ResponseCheckTx, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -249,7 +243,10 @@ func (app *localClient) CheckTxSync(req types.RequestCheckTx) (*types.ResponseCh
 	return &res, nil
 }
 
-func (app *localClient) QuerySync(req types.RequestQuery) (*types.ResponseQuery, error) {
+func (app *localClient) QuerySync(
+	ctx context.Context,
+	req types.RequestQuery,
+) (*types.ResponseQuery, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -257,7 +254,7 @@ func (app *localClient) QuerySync(req types.RequestQuery) (*types.ResponseQuery,
 	return &res, nil
 }
 
-func (app *localClient) CommitSync() (*types.ResponseCommit, error) {
+func (app *localClient) CommitSync(ctx context.Context) (*types.ResponseCommit, error) {
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -265,7 +262,11 @@ func (app *localClient) CommitSync() (*types.ResponseCommit, error) {
 	return &res, nil
 }
 
-func (app *localClient) InitChainSync(req types.RequestInitChain) (*types.ResponseInitChain, error) {
+func (app *localClient) InitChainSync(
+	ctx context.Context,
+	req types.RequestInitChain,
+) (*types.ResponseInitChain, error) {
+
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -273,7 +274,11 @@ func (app *localClient) InitChainSync(req types.RequestInitChain) (*types.Respon
 	return &res, nil
 }
 
-func (app *localClient) BeginBlockSync(req types.RequestBeginBlock) (*types.ResponseBeginBlock, error) {
+func (app *localClient) BeginBlockSync(
+	ctx context.Context,
+	req types.RequestBeginBlock,
+) (*types.ResponseBeginBlock, error) {
+
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -281,7 +286,11 @@ func (app *localClient) BeginBlockSync(req types.RequestBeginBlock) (*types.Resp
 	return &res, nil
 }
 
-func (app *localClient) EndBlockSync(req types.RequestEndBlock) (*types.ResponseEndBlock, error) {
+func (app *localClient) EndBlockSync(
+	ctx context.Context,
+	req types.RequestEndBlock,
+) (*types.ResponseEndBlock, error) {
+
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -289,7 +298,11 @@ func (app *localClient) EndBlockSync(req types.RequestEndBlock) (*types.Response
 	return &res, nil
 }
 
-func (app *localClient) ListSnapshotsSync(req types.RequestListSnapshots) (*types.ResponseListSnapshots, error) {
+func (app *localClient) ListSnapshotsSync(
+	ctx context.Context,
+	req types.RequestListSnapshots,
+) (*types.ResponseListSnapshots, error) {
+
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -297,7 +310,11 @@ func (app *localClient) ListSnapshotsSync(req types.RequestListSnapshots) (*type
 	return &res, nil
 }
 
-func (app *localClient) OfferSnapshotSync(req types.RequestOfferSnapshot) (*types.ResponseOfferSnapshot, error) {
+func (app *localClient) OfferSnapshotSync(
+	ctx context.Context,
+	req types.RequestOfferSnapshot,
+) (*types.ResponseOfferSnapshot, error) {
+
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -306,7 +323,9 @@ func (app *localClient) OfferSnapshotSync(req types.RequestOfferSnapshot) (*type
 }
 
 func (app *localClient) LoadSnapshotChunkSync(
+	ctx context.Context,
 	req types.RequestLoadSnapshotChunk) (*types.ResponseLoadSnapshotChunk, error) {
+
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 
@@ -315,7 +334,9 @@ func (app *localClient) LoadSnapshotChunkSync(
 }
 
 func (app *localClient) ApplySnapshotChunkSync(
+	ctx context.Context,
 	req types.RequestApplySnapshotChunk) (*types.ResponseApplySnapshotChunk, error) {
+
 	app.mtx.Lock()
 	defer app.mtx.Unlock()
 

abci/client/mocks/client.go

@@ -1,9 +1,12 @@
-// Code generated by mockery v1.1.1. DO NOT EDIT.
+// Code generated by mockery v2.3.0. DO NOT EDIT.
 
 package mocks
 
 import (
+	context "context"
+
 	abcicli "github.com/tendermint/tendermint/abci/client"
+
 	log "github.com/tendermint/tendermint/libs/log"
 
 	mock "github.com/stretchr/testify/mock"
@@ -16,29 +19,36 @@ type Client struct {
 	mock.Mock
 }
 
-// ApplySnapshotChunkAsync provides a mock function with given fields: _a0
-func (_m *Client) ApplySnapshotChunkAsync(_a0 types.RequestApplySnapshotChunk) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// ApplySnapshotChunkAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) ApplySnapshotChunkAsync(_a0 context.Context, _a1 types.RequestApplySnapshotChunk) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestApplySnapshotChunk) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestApplySnapshotChunk) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestApplySnapshotChunk) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// ApplySnapshotChunkSync provides a mock function with given fields: _a0
-func (_m *Client) ApplySnapshotChunkSync(_a0 types.RequestApplySnapshotChunk) (*types.ResponseApplySnapshotChunk, error) {
-	ret := _m.Called(_a0)
+// ApplySnapshotChunkSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) ApplySnapshotChunkSync(_a0 context.Context, _a1 types.RequestApplySnapshotChunk) (*types.ResponseApplySnapshotChunk, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseApplySnapshotChunk
-	if rf, ok := ret.Get(0).(func(types.RequestApplySnapshotChunk) *types.ResponseApplySnapshotChunk); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestApplySnapshotChunk) *types.ResponseApplySnapshotChunk); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseApplySnapshotChunk)
@@ -46,8 +56,8 @@ func (_m *Client) ApplySnapshotChunkSync(_a0 types.RequestApplySnapshotChunk) (*
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestApplySnapshotChunk) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestApplySnapshotChunk) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -55,29 +65,36 @@ func (_m *Client) ApplySnapshotChunkSync(_a0 types.RequestApplySnapshotChunk) (*
 	return r0, r1
 }
 
-// BeginBlockAsync provides a mock function with given fields: _a0
-func (_m *Client) BeginBlockAsync(_a0 types.RequestBeginBlock) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// BeginBlockAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) BeginBlockAsync(_a0 context.Context, _a1 types.RequestBeginBlock) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestBeginBlock) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestBeginBlock) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestBeginBlock) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// BeginBlockSync provides a mock function with given fields: _a0
-func (_m *Client) BeginBlockSync(_a0 types.RequestBeginBlock) (*types.ResponseBeginBlock, error) {
-	ret := _m.Called(_a0)
+// BeginBlockSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) BeginBlockSync(_a0 context.Context, _a1 types.RequestBeginBlock) (*types.ResponseBeginBlock, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseBeginBlock
-	if rf, ok := ret.Get(0).(func(types.RequestBeginBlock) *types.ResponseBeginBlock); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestBeginBlock) *types.ResponseBeginBlock); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseBeginBlock)
@@ -85,8 +102,8 @@ func (_m *Client) BeginBlockSync(_a0 types.RequestBeginBlock) (*types.ResponseBe
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestBeginBlock) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestBeginBlock) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -94,29 +111,36 @@ func (_m *Client) BeginBlockSync(_a0 types.RequestBeginBlock) (*types.ResponseBe
 	return r0, r1
 }
 
-// CheckTxAsync provides a mock function with given fields: _a0
-func (_m *Client) CheckTxAsync(_a0 types.RequestCheckTx) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// CheckTxAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) CheckTxAsync(_a0 context.Context, _a1 types.RequestCheckTx) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestCheckTx) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestCheckTx) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestCheckTx) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// CheckTxSync provides a mock function with given fields: _a0
-func (_m *Client) CheckTxSync(_a0 types.RequestCheckTx) (*types.ResponseCheckTx, error) {
-	ret := _m.Called(_a0)
+// CheckTxSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) CheckTxSync(_a0 context.Context, _a1 types.RequestCheckTx) (*types.ResponseCheckTx, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseCheckTx
-	if rf, ok := ret.Get(0).(func(types.RequestCheckTx) *types.ResponseCheckTx); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestCheckTx) *types.ResponseCheckTx); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseCheckTx)
@@ -124,7 +148,30 @@ func (_m *Client) CheckTxSync(_a0 types.RequestCheckTx) (*types.ResponseCheckTx,
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestCheckTx) error); ok {
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestCheckTx) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
+}
+
+// CommitAsync provides a mock function with given fields: _a0
+func (_m *Client) CommitAsync(_a0 context.Context) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0)
+
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context) *abcicli.ReqRes); ok {
+		r0 = rf(_a0)
+	} else {
+		if ret.Get(0) != nil {
+			r0 = ret.Get(0).(*abcicli.ReqRes)
+		}
+	}
+
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context) error); ok {
 		r1 = rf(_a0)
 	} else {
 		r1 = ret.Error(1)
@@ -133,29 +180,13 @@ func (_m *Client) CheckTxSync(_a0 types.RequestCheckTx) (*types.ResponseCheckTx,
 	return r0, r1
 }
 
-// CommitAsync provides a mock function with given fields:
-func (_m *Client) CommitAsync() *abcicli.ReqRes {
-	ret := _m.Called()
-
-	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func() *abcicli.ReqRes); ok {
-		r0 = rf()
-	} else {
-		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abcicli.ReqRes)
-		}
-	}
-
-	return r0
-}
-
-// CommitSync provides a mock function with given fields:
-func (_m *Client) CommitSync() (*types.ResponseCommit, error) {
-	ret := _m.Called()
+// CommitSync provides a mock function with given fields: _a0
+func (_m *Client) CommitSync(_a0 context.Context) (*types.ResponseCommit, error) {
+	ret := _m.Called(_a0)
 
 	var r0 *types.ResponseCommit
-	if rf, ok := ret.Get(0).(func() *types.ResponseCommit); ok {
-		r0 = rf()
+	if rf, ok := ret.Get(0).(func(context.Context) *types.ResponseCommit); ok {
+		r0 = rf(_a0)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseCommit)
@@ -163,8 +194,8 @@ func (_m *Client) CommitSync() (*types.ResponseCommit, error) {
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func() error); ok {
-		r1 = rf()
+	if rf, ok := ret.Get(1).(func(context.Context) error); ok {
+		r1 = rf(_a0)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -172,29 +203,36 @@ func (_m *Client) CommitSync() (*types.ResponseCommit, error) {
 	return r0, r1
 }
 
-// DeliverTxAsync provides a mock function with given fields: _a0
-func (_m *Client) DeliverTxAsync(_a0 types.RequestDeliverTx) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// DeliverTxAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) DeliverTxAsync(_a0 context.Context, _a1 types.RequestDeliverTx) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestDeliverTx) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestDeliverTx) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestDeliverTx) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// DeliverTxSync provides a mock function with given fields: _a0
-func (_m *Client) DeliverTxSync(_a0 types.RequestDeliverTx) (*types.ResponseDeliverTx, error) {
-	ret := _m.Called(_a0)
+// DeliverTxSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) DeliverTxSync(_a0 context.Context, _a1 types.RequestDeliverTx) (*types.ResponseDeliverTx, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseDeliverTx
-	if rf, ok := ret.Get(0).(func(types.RequestDeliverTx) *types.ResponseDeliverTx); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestDeliverTx) *types.ResponseDeliverTx); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseDeliverTx)
@@ -202,8 +240,8 @@ func (_m *Client) DeliverTxSync(_a0 types.RequestDeliverTx) (*types.ResponseDeli
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestDeliverTx) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestDeliverTx) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -211,29 +249,36 @@ func (_m *Client) DeliverTxSync(_a0 types.RequestDeliverTx) (*types.ResponseDeli
 	return r0, r1
 }
 
-// EchoAsync provides a mock function with given fields: msg
-func (_m *Client) EchoAsync(msg string) *abcicli.ReqRes {
-	ret := _m.Called(msg)
+// EchoAsync provides a mock function with given fields: ctx, msg
+func (_m *Client) EchoAsync(ctx context.Context, msg string) (*abcicli.ReqRes, error) {
+	ret := _m.Called(ctx, msg)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(string) *abcicli.ReqRes); ok {
-		r0 = rf(msg)
+	if rf, ok := ret.Get(0).(func(context.Context, string) *abcicli.ReqRes); ok {
+		r0 = rf(ctx, msg)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, string) error); ok {
+		r1 = rf(ctx, msg)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// EchoSync provides a mock function with given fields: msg
-func (_m *Client) EchoSync(msg string) (*types.ResponseEcho, error) {
-	ret := _m.Called(msg)
+// EchoSync provides a mock function with given fields: ctx, msg
+func (_m *Client) EchoSync(ctx context.Context, msg string) (*types.ResponseEcho, error) {
+	ret := _m.Called(ctx, msg)
 
 	var r0 *types.ResponseEcho
-	if rf, ok := ret.Get(0).(func(string) *types.ResponseEcho); ok {
-		r0 = rf(msg)
+	if rf, ok := ret.Get(0).(func(context.Context, string) *types.ResponseEcho); ok {
+		r0 = rf(ctx, msg)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseEcho)
@@ -241,8 +286,8 @@ func (_m *Client) EchoSync(msg string) (*types.ResponseEcho, error) {
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(string) error); ok {
-		r1 = rf(msg)
+	if rf, ok := ret.Get(1).(func(context.Context, string) error); ok {
+		r1 = rf(ctx, msg)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -250,29 +295,36 @@ func (_m *Client) EchoSync(msg string) (*types.ResponseEcho, error) {
 	return r0, r1
 }
 
-// EndBlockAsync provides a mock function with given fields: _a0
-func (_m *Client) EndBlockAsync(_a0 types.RequestEndBlock) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// EndBlockAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) EndBlockAsync(_a0 context.Context, _a1 types.RequestEndBlock) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestEndBlock) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestEndBlock) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestEndBlock) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// EndBlockSync provides a mock function with given fields: _a0
-func (_m *Client) EndBlockSync(_a0 types.RequestEndBlock) (*types.ResponseEndBlock, error) {
-	ret := _m.Called(_a0)
+// EndBlockSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) EndBlockSync(_a0 context.Context, _a1 types.RequestEndBlock) (*types.ResponseEndBlock, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseEndBlock
-	if rf, ok := ret.Get(0).(func(types.RequestEndBlock) *types.ResponseEndBlock); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestEndBlock) *types.ResponseEndBlock); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseEndBlock)
@@ -280,8 +332,8 @@ func (_m *Client) EndBlockSync(_a0 types.RequestEndBlock) (*types.ResponseEndBlo
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestEndBlock) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestEndBlock) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -303,42 +355,12 @@ func (_m *Client) Error() error {
 	return r0
 }
 
-// FlushAsync provides a mock function with given fields:
-func (_m *Client) FlushAsync() *abcicli.ReqRes {
-	ret := _m.Called()
-
-	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func() *abcicli.ReqRes); ok {
-		r0 = rf()
-	} else {
-		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abcicli.ReqRes)
-		}
-	}
-
-	return r0
-}
-
-// FlushSync provides a mock function with given fields:
-func (_m *Client) FlushSync() error {
-	ret := _m.Called()
-
-	var r0 error
-	if rf, ok := ret.Get(0).(func() error); ok {
-		r0 = rf()
-	} else {
-		r0 = ret.Error(0)
-	}
-
-	return r0
-}
-
-// InfoAsync provides a mock function with given fields: _a0
-func (_m *Client) InfoAsync(_a0 types.RequestInfo) *abcicli.ReqRes {
+// FlushAsync provides a mock function with given fields: _a0
+func (_m *Client) FlushAsync(_a0 context.Context) (*abcicli.ReqRes, error) {
 	ret := _m.Called(_a0)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestInfo) *abcicli.ReqRes); ok {
+	if rf, ok := ret.Get(0).(func(context.Context) *abcicli.ReqRes); ok {
 		r0 = rf(_a0)
 	} else {
 		if ret.Get(0) != nil {
@@ -346,24 +368,8 @@ func (_m *Client) InfoAsync(_a0 types.RequestInfo) *abcicli.ReqRes {
 		}
 	}
 
-	return r0
-}
-
-// InfoSync provides a mock function with given fields: _a0
-func (_m *Client) InfoSync(_a0 types.RequestInfo) (*types.ResponseInfo, error) {
-	ret := _m.Called(_a0)
-
-	var r0 *types.ResponseInfo
-	if rf, ok := ret.Get(0).(func(types.RequestInfo) *types.ResponseInfo); ok {
-		r0 = rf(_a0)
-	} else {
-		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*types.ResponseInfo)
-		}
-	}
-
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestInfo) error); ok {
+	if rf, ok := ret.Get(1).(func(context.Context) error); ok {
 		r1 = rf(_a0)
 	} else {
 		r1 = ret.Error(1)
@@ -372,29 +378,96 @@ func (_m *Client) InfoSync(_a0 types.RequestInfo) (*types.ResponseInfo, error) {
 	return r0, r1
 }
 
-// InitChainAsync provides a mock function with given fields: _a0
-func (_m *Client) InitChainAsync(_a0 types.RequestInitChain) *abcicli.ReqRes {
+// FlushSync provides a mock function with given fields: _a0
+func (_m *Client) FlushSync(_a0 context.Context) error {
 	ret := _m.Called(_a0)
 
-	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestInitChain) *abcicli.ReqRes); ok {
+	var r0 error
+	if rf, ok := ret.Get(0).(func(context.Context) error); ok {
 		r0 = rf(_a0)
+	} else {
+		r0 = ret.Error(0)
+	}
+
+	return r0
+}
+
+// InfoAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) InfoAsync(_a0 context.Context, _a1 types.RequestInfo) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
+
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInfo) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestInfo) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// InitChainSync provides a mock function with given fields: _a0
-func (_m *Client) InitChainSync(_a0 types.RequestInitChain) (*types.ResponseInitChain, error) {
-	ret := _m.Called(_a0)
+// InfoSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) InfoSync(_a0 context.Context, _a1 types.RequestInfo) (*types.ResponseInfo, error) {
+	ret := _m.Called(_a0, _a1)
+
+	var r0 *types.ResponseInfo
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInfo) *types.ResponseInfo); ok {
+		r0 = rf(_a0, _a1)
+	} else {
+		if ret.Get(0) != nil {
+			r0 = ret.Get(0).(*types.ResponseInfo)
+		}
+	}
+
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestInfo) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
+}
+
+// InitChainAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) InitChainAsync(_a0 context.Context, _a1 types.RequestInitChain) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
+
+	var r0 *abcicli.ReqRes
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInitChain) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
+	} else {
+		if ret.Get(0) != nil {
+			r0 = ret.Get(0).(*abcicli.ReqRes)
+		}
+	}
+
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestInitChain) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
+}
+
+// InitChainSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) InitChainSync(_a0 context.Context, _a1 types.RequestInitChain) (*types.ResponseInitChain, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseInitChain
-	if rf, ok := ret.Get(0).(func(types.RequestInitChain) *types.ResponseInitChain); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestInitChain) *types.ResponseInitChain); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseInitChain)
@@ -402,8 +475,8 @@ func (_m *Client) InitChainSync(_a0 types.RequestInitChain) (*types.ResponseInit
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestInitChain) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestInitChain) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -425,29 +498,36 @@ func (_m *Client) IsRunning() bool {
 	return r0
 }
 
-// ListSnapshotsAsync provides a mock function with given fields: _a0
-func (_m *Client) ListSnapshotsAsync(_a0 types.RequestListSnapshots) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// ListSnapshotsAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) ListSnapshotsAsync(_a0 context.Context, _a1 types.RequestListSnapshots) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestListSnapshots) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestListSnapshots) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestListSnapshots) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// ListSnapshotsSync provides a mock function with given fields: _a0
-func (_m *Client) ListSnapshotsSync(_a0 types.RequestListSnapshots) (*types.ResponseListSnapshots, error) {
-	ret := _m.Called(_a0)
+// ListSnapshotsSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) ListSnapshotsSync(_a0 context.Context, _a1 types.RequestListSnapshots) (*types.ResponseListSnapshots, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseListSnapshots
-	if rf, ok := ret.Get(0).(func(types.RequestListSnapshots) *types.ResponseListSnapshots); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestListSnapshots) *types.ResponseListSnapshots); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseListSnapshots)
@@ -455,8 +535,8 @@ func (_m *Client) ListSnapshotsSync(_a0 types.RequestListSnapshots) (*types.Resp
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestListSnapshots) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestListSnapshots) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -464,29 +544,36 @@ func (_m *Client) ListSnapshotsSync(_a0 types.RequestListSnapshots) (*types.Resp
 	return r0, r1
 }
 
-// LoadSnapshotChunkAsync provides a mock function with given fields: _a0
-func (_m *Client) LoadSnapshotChunkAsync(_a0 types.RequestLoadSnapshotChunk) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// LoadSnapshotChunkAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) LoadSnapshotChunkAsync(_a0 context.Context, _a1 types.RequestLoadSnapshotChunk) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestLoadSnapshotChunk) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestLoadSnapshotChunk) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestLoadSnapshotChunk) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// LoadSnapshotChunkSync provides a mock function with given fields: _a0
-func (_m *Client) LoadSnapshotChunkSync(_a0 types.RequestLoadSnapshotChunk) (*types.ResponseLoadSnapshotChunk, error) {
-	ret := _m.Called(_a0)
+// LoadSnapshotChunkSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) LoadSnapshotChunkSync(_a0 context.Context, _a1 types.RequestLoadSnapshotChunk) (*types.ResponseLoadSnapshotChunk, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseLoadSnapshotChunk
-	if rf, ok := ret.Get(0).(func(types.RequestLoadSnapshotChunk) *types.ResponseLoadSnapshotChunk); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestLoadSnapshotChunk) *types.ResponseLoadSnapshotChunk); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseLoadSnapshotChunk)
@@ -494,8 +581,8 @@ func (_m *Client) LoadSnapshotChunkSync(_a0 types.RequestLoadSnapshotChunk) (*ty
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestLoadSnapshotChunk) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestLoadSnapshotChunk) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -503,29 +590,36 @@ func (_m *Client) LoadSnapshotChunkSync(_a0 types.RequestLoadSnapshotChunk) (*ty
 	return r0, r1
 }
 
-// OfferSnapshotAsync provides a mock function with given fields: _a0
-func (_m *Client) OfferSnapshotAsync(_a0 types.RequestOfferSnapshot) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// OfferSnapshotAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) OfferSnapshotAsync(_a0 context.Context, _a1 types.RequestOfferSnapshot) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestOfferSnapshot) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestOfferSnapshot) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestOfferSnapshot) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// OfferSnapshotSync provides a mock function with given fields: _a0
-func (_m *Client) OfferSnapshotSync(_a0 types.RequestOfferSnapshot) (*types.ResponseOfferSnapshot, error) {
-	ret := _m.Called(_a0)
+// OfferSnapshotSync provides a mock function with given fields: _a0, _a1
+func (_m *Client) OfferSnapshotSync(_a0 context.Context, _a1 types.RequestOfferSnapshot) (*types.ResponseOfferSnapshot, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseOfferSnapshot
-	if rf, ok := ret.Get(0).(func(types.RequestOfferSnapshot) *types.ResponseOfferSnapshot); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestOfferSnapshot) *types.ResponseOfferSnapshot); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseOfferSnapshot)
@@ -533,8 +627,8 @@ func (_m *Client) OfferSnapshotSync(_a0 types.RequestOfferSnapshot) (*types.Resp
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestOfferSnapshot) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestOfferSnapshot) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -575,29 +669,36 @@ func (_m *Client) OnStop() {
 	_m.Called()
 }
 
-// QueryAsync provides a mock function with given fields: _a0
-func (_m *Client) QueryAsync(_a0 types.RequestQuery) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
+// QueryAsync provides a mock function with given fields: _a0, _a1
+func (_m *Client) QueryAsync(_a0 context.Context, _a1 types.RequestQuery) (*abcicli.ReqRes, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestQuery) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestQuery) *abcicli.ReqRes); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*abcicli.ReqRes)
 		}
 	}
 
-	return r0
+	var r1 error
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestQuery) error); ok {
+		r1 = rf(_a0, _a1)
+	} else {
+		r1 = ret.Error(1)
+	}
+
+	return r0, r1
 }
 
-// QuerySync provides a mock function with given fields: _a0
-func (_m *Client) QuerySync(_a0 types.RequestQuery) (*types.ResponseQuery, error) {
-	ret := _m.Called(_a0)
+// QuerySync provides a mock function with given fields: _a0, _a1
+func (_m *Client) QuerySync(_a0 context.Context, _a1 types.RequestQuery) (*types.ResponseQuery, error) {
+	ret := _m.Called(_a0, _a1)
 
 	var r0 *types.ResponseQuery
-	if rf, ok := ret.Get(0).(func(types.RequestQuery) *types.ResponseQuery); ok {
-		r0 = rf(_a0)
+	if rf, ok := ret.Get(0).(func(context.Context, types.RequestQuery) *types.ResponseQuery); ok {
+		r0 = rf(_a0, _a1)
 	} else {
 		if ret.Get(0) != nil {
 			r0 = ret.Get(0).(*types.ResponseQuery)
@@ -605,8 +706,8 @@ func (_m *Client) QuerySync(_a0 types.RequestQuery) (*types.ResponseQuery, error
 	}
 
 	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestQuery) error); ok {
-		r1 = rf(_a0)
+	if rf, ok := ret.Get(1).(func(context.Context, types.RequestQuery) error); ok {
+		r1 = rf(_a0, _a1)
 	} else {
 		r1 = ret.Error(1)
 	}
@@ -649,45 +750,6 @@ func (_m *Client) SetLogger(_a0 log.Logger) {
 	_m.Called(_a0)
 }
 
-// SetOptionAsync provides a mock function with given fields: _a0
-func (_m *Client) SetOptionAsync(_a0 types.RequestSetOption) *abcicli.ReqRes {
-	ret := _m.Called(_a0)
-
-	var r0 *abcicli.ReqRes
-	if rf, ok := ret.Get(0).(func(types.RequestSetOption) *abcicli.ReqRes); ok {
-		r0 = rf(_a0)
-	} else {
-		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*abcicli.ReqRes)
-		}
-	}
-
-	return r0
-}
-
-// SetOptionSync provides a mock function with given fields: _a0
-func (_m *Client) SetOptionSync(_a0 types.RequestSetOption) (*types.ResponseSetOption, error) {
-	ret := _m.Called(_a0)
-
-	var r0 *types.ResponseSetOption
-	if rf, ok := ret.Get(0).(func(types.RequestSetOption) *types.ResponseSetOption); ok {
-		r0 = rf(_a0)
-	} else {
-		if ret.Get(0) != nil {
-			r0 = ret.Get(0).(*types.ResponseSetOption)
-		}
-	}
-
-	var r1 error
-	if rf, ok := ret.Get(1).(func(types.RequestSetOption) error); ok {
-		r1 = rf(_a0)
-	} else {
-		r1 = ret.Error(1)
-	}
-
-	return r0, r1
-}
-
 // SetResponseCallback provides a mock function with given fields: _a0
 func (_m *Client) SetResponseCallback(_a0 abcicli.Callback) {
 	_m.Called(_a0)

abci/client/socket_client.go

@@ -3,6 +3,7 @@ package abcicli
 import (
 	"bufio"
 	"container/list"
+	"context"
 	"errors"
 	"fmt"
 	"io"
@@ -18,10 +19,18 @@ import (
 )
 
 const (
-	reqQueueSize    = 256 // TODO make configurable
-	flushThrottleMS = 20  // Don't wait longer than...
+	// reqQueueSize is the max number of queued async requests.
+	// (memory: 256MB max assuming 1MB transactions)
+	reqQueueSize = 256
+	// Don't wait longer than...
+	flushThrottleMS = 20
 )
 
+type reqResWithContext struct {
+	R *ReqRes
+	C context.Context // if context.Err is not nil, reqRes will be thrown away (ignored)
+}
+
 // This is goroutine-safe, but users should beware that the application in
 // general is not meant to be interfaced with concurrent callers.
 type socketClient struct {
@@ -31,7 +40,7 @@ type socketClient struct {
 	mustConnect bool
 	conn        net.Conn
 
-	reqQueue   chan *ReqRes
+	reqQueue   chan *reqResWithContext
 	flushTimer *timer.ThrottleTimer
 
 	mtx     tmsync.Mutex
@@ -47,7 +56,7 @@ var _ Client = (*socketClient)(nil)
 // if it fails to connect.
 func NewSocketClient(addr string, mustConnect bool) Client {
 	cli := &socketClient{
-		reqQueue:    make(chan *ReqRes, reqQueueSize),
+		reqQueue:    make(chan *reqResWithContext, reqQueueSize),
 		flushTimer:  timer.NewThrottleTimer("socketClient", flushThrottleMS),
 		mustConnect: mustConnect,
 
@@ -123,15 +132,20 @@ func (cli *socketClient) sendRequestsRoutine(conn io.Writer) {
 		case reqres := <-cli.reqQueue:
 			// cli.Logger.Debug("Sent request", "requestType", reflect.TypeOf(reqres.Request), "request", reqres.Request)
 
-			cli.willSendReq(reqres)
-			err := types.WriteMessage(reqres.Request, w)
+			if reqres.C.Err() != nil {
+				cli.Logger.Debug("Request's context is done", "req", reqres.R, "err", reqres.C.Err())
+				continue
+			}
+
+			cli.willSendReq(reqres.R)
+			err := types.WriteMessage(reqres.R.Request, w)
 			if err != nil {
 				cli.stopForError(fmt.Errorf("write to buffer: %w", err))
 				return
 			}
 
 			// If it's a flush request, flush the current buffer.
-			if _, ok := reqres.Request.Value.(*types.Request_Flush); ok {
+			if _, ok := reqres.R.Request.Value.(*types.Request_Flush); ok {
 				err = w.Flush()
 				if err != nil {
 					cli.stopForError(fmt.Errorf("flush buffer: %w", err))
@@ -140,7 +154,7 @@ func (cli *socketClient) sendRequestsRoutine(conn io.Writer) {
 			}
 		case <-cli.flushTimer.Ch: // flush queue
 			select {
-			case cli.reqQueue <- NewReqRes(types.ToRequestFlush()):
+			case cli.reqQueue <- &reqResWithContext{R: NewReqRes(types.ToRequestFlush()), C: context.Background()}:
 			default:
 				// Probably will fill the buffer, or retry later.
 			}
@@ -212,218 +226,273 @@ func (cli *socketClient) didRecvResponse(res *types.Response) error {
 	//
 	// NOTE: It is possible this callback isn't set on the reqres object. At this
 	// point, in which case it will be called after, when it is set.
-	reqres.InvokeCallback()
+	if cb := reqres.GetCallback(); cb != nil {
+		cb(res)
+	}
 
 	return nil
 }
 
 //----------------------------------------
 
-func (cli *socketClient) EchoAsync(msg string) *ReqRes {
-	return cli.queueRequest(types.ToRequestEcho(msg))
+func (cli *socketClient) EchoAsync(ctx context.Context, msg string) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestEcho(msg))
 }
 
-func (cli *socketClient) FlushAsync() *ReqRes {
-	return cli.queueRequest(types.ToRequestFlush())
+func (cli *socketClient) FlushAsync(ctx context.Context) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestFlush())
 }
 
-func (cli *socketClient) InfoAsync(req types.RequestInfo) *ReqRes {
-	return cli.queueRequest(types.ToRequestInfo(req))
+func (cli *socketClient) InfoAsync(ctx context.Context, req types.RequestInfo) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestInfo(req))
 }
 
-func (cli *socketClient) SetOptionAsync(req types.RequestSetOption) *ReqRes {
-	return cli.queueRequest(types.ToRequestSetOption(req))
+func (cli *socketClient) DeliverTxAsync(ctx context.Context, req types.RequestDeliverTx) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestDeliverTx(req))
 }
 
-func (cli *socketClient) DeliverTxAsync(req types.RequestDeliverTx) *ReqRes {
-	return cli.queueRequest(types.ToRequestDeliverTx(req))
+func (cli *socketClient) CheckTxAsync(ctx context.Context, req types.RequestCheckTx) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestCheckTx(req))
 }
 
-func (cli *socketClient) CheckTxAsync(req types.RequestCheckTx) *ReqRes {
-	return cli.queueRequest(types.ToRequestCheckTx(req))
+func (cli *socketClient) QueryAsync(ctx context.Context, req types.RequestQuery) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestQuery(req))
 }
 
-func (cli *socketClient) QueryAsync(req types.RequestQuery) *ReqRes {
-	return cli.queueRequest(types.ToRequestQuery(req))
+func (cli *socketClient) CommitAsync(ctx context.Context) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestCommit())
 }
 
-func (cli *socketClient) CommitAsync() *ReqRes {
-	return cli.queueRequest(types.ToRequestCommit())
+func (cli *socketClient) InitChainAsync(ctx context.Context, req types.RequestInitChain) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestInitChain(req))
 }
 
-func (cli *socketClient) InitChainAsync(req types.RequestInitChain) *ReqRes {
-	return cli.queueRequest(types.ToRequestInitChain(req))
+func (cli *socketClient) BeginBlockAsync(ctx context.Context, req types.RequestBeginBlock) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestBeginBlock(req))
 }
 
-func (cli *socketClient) BeginBlockAsync(req types.RequestBeginBlock) *ReqRes {
-	return cli.queueRequest(types.ToRequestBeginBlock(req))
+func (cli *socketClient) EndBlockAsync(ctx context.Context, req types.RequestEndBlock) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestEndBlock(req))
 }
 
-func (cli *socketClient) EndBlockAsync(req types.RequestEndBlock) *ReqRes {
-	return cli.queueRequest(types.ToRequestEndBlock(req))
+func (cli *socketClient) ListSnapshotsAsync(ctx context.Context, req types.RequestListSnapshots) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestListSnapshots(req))
 }
 
-func (cli *socketClient) ListSnapshotsAsync(req types.RequestListSnapshots) *ReqRes {
-	return cli.queueRequest(types.ToRequestListSnapshots(req))
+func (cli *socketClient) OfferSnapshotAsync(ctx context.Context, req types.RequestOfferSnapshot) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestOfferSnapshot(req))
 }
 
-func (cli *socketClient) OfferSnapshotAsync(req types.RequestOfferSnapshot) *ReqRes {
-	return cli.queueRequest(types.ToRequestOfferSnapshot(req))
+func (cli *socketClient) LoadSnapshotChunkAsync(
+	ctx context.Context,
+	req types.RequestLoadSnapshotChunk,
+) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestLoadSnapshotChunk(req))
 }
 
-func (cli *socketClient) LoadSnapshotChunkAsync(req types.RequestLoadSnapshotChunk) *ReqRes {
-	return cli.queueRequest(types.ToRequestLoadSnapshotChunk(req))
-}
-
-func (cli *socketClient) ApplySnapshotChunkAsync(req types.RequestApplySnapshotChunk) *ReqRes {
-	return cli.queueRequest(types.ToRequestApplySnapshotChunk(req))
+func (cli *socketClient) ApplySnapshotChunkAsync(
+	ctx context.Context,
+	req types.RequestApplySnapshotChunk,
+) (*ReqRes, error) {
+	return cli.queueRequestAsync(ctx, types.ToRequestApplySnapshotChunk(req))
 }
 
 //----------------------------------------
 
-func (cli *socketClient) FlushSync() error {
-	reqRes := cli.queueRequest(types.ToRequestFlush())
+func (cli *socketClient) FlushSync(ctx context.Context) error {
+	reqRes, err := cli.queueRequest(ctx, types.ToRequestFlush(), true)
+	if err != nil {
+		return queueErr(err)
+	}
+
 	if err := cli.Error(); err != nil {
 		return err
 	}
-	reqRes.Wait() // NOTE: if we don't flush the queue, its possible to get stuck here
-	return cli.Error()
+
+	gotResp := make(chan struct{})
+	go func() {
+		// NOTE: if we don't flush the queue, its possible to get stuck here
+		reqRes.Wait()
+		close(gotResp)
+	}()
+
+	select {
+	case <-gotResp:
+		return cli.Error()
+	case <-ctx.Done():
+		return ctx.Err()
+	}
 }
 
-func (cli *socketClient) EchoSync(msg string) (*types.ResponseEcho, error) {
-	reqres := cli.queueRequest(types.ToRequestEcho(msg))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) EchoSync(ctx context.Context, msg string) (*types.ResponseEcho, error) {
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestEcho(msg))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetEcho(), cli.Error()
+	return reqres.Response.GetEcho(), nil
 }
 
-func (cli *socketClient) InfoSync(req types.RequestInfo) (*types.ResponseInfo, error) {
-	reqres := cli.queueRequest(types.ToRequestInfo(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) InfoSync(
+	ctx context.Context,
+	req types.RequestInfo,
+) (*types.ResponseInfo, error) {
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestInfo(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetInfo(), cli.Error()
+	return reqres.Response.GetInfo(), nil
 }
 
-func (cli *socketClient) SetOptionSync(req types.RequestSetOption) (*types.ResponseSetOption, error) {
-	reqres := cli.queueRequest(types.ToRequestSetOption(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) DeliverTxSync(
+	ctx context.Context,
+	req types.RequestDeliverTx,
+) (*types.ResponseDeliverTx, error) {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestDeliverTx(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetSetOption(), cli.Error()
+	return reqres.Response.GetDeliverTx(), nil
 }
 
-func (cli *socketClient) DeliverTxSync(req types.RequestDeliverTx) (*types.ResponseDeliverTx, error) {
-	reqres := cli.queueRequest(types.ToRequestDeliverTx(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) CheckTxSync(
+	ctx context.Context,
+	req types.RequestCheckTx,
+) (*types.ResponseCheckTx, error) {
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestCheckTx(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetDeliverTx(), cli.Error()
+	return reqres.Response.GetCheckTx(), nil
 }
 
-func (cli *socketClient) CheckTxSync(req types.RequestCheckTx) (*types.ResponseCheckTx, error) {
-	reqres := cli.queueRequest(types.ToRequestCheckTx(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) QuerySync(
+	ctx context.Context,
+	req types.RequestQuery,
+) (*types.ResponseQuery, error) {
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestQuery(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetCheckTx(), cli.Error()
+	return reqres.Response.GetQuery(), nil
 }
 
-func (cli *socketClient) QuerySync(req types.RequestQuery) (*types.ResponseQuery, error) {
-	reqres := cli.queueRequest(types.ToRequestQuery(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) CommitSync(ctx context.Context) (*types.ResponseCommit, error) {
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestCommit())
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetQuery(), cli.Error()
+	return reqres.Response.GetCommit(), nil
 }
 
-func (cli *socketClient) CommitSync() (*types.ResponseCommit, error) {
-	reqres := cli.queueRequest(types.ToRequestCommit())
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) InitChainSync(
+	ctx context.Context,
+	req types.RequestInitChain,
+) (*types.ResponseInitChain, error) {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestInitChain(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetCommit(), cli.Error()
+	return reqres.Response.GetInitChain(), nil
 }
 
-func (cli *socketClient) InitChainSync(req types.RequestInitChain) (*types.ResponseInitChain, error) {
-	reqres := cli.queueRequest(types.ToRequestInitChain(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) BeginBlockSync(
+	ctx context.Context,
+	req types.RequestBeginBlock,
+) (*types.ResponseBeginBlock, error) {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestBeginBlock(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetInitChain(), cli.Error()
+	return reqres.Response.GetBeginBlock(), nil
 }
 
-func (cli *socketClient) BeginBlockSync(req types.RequestBeginBlock) (*types.ResponseBeginBlock, error) {
-	reqres := cli.queueRequest(types.ToRequestBeginBlock(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) EndBlockSync(
+	ctx context.Context,
+	req types.RequestEndBlock,
+) (*types.ResponseEndBlock, error) {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestEndBlock(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetBeginBlock(), cli.Error()
+	return reqres.Response.GetEndBlock(), nil
 }
 
-func (cli *socketClient) EndBlockSync(req types.RequestEndBlock) (*types.ResponseEndBlock, error) {
-	reqres := cli.queueRequest(types.ToRequestEndBlock(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) ListSnapshotsSync(
+	ctx context.Context,
+	req types.RequestListSnapshots,
+) (*types.ResponseListSnapshots, error) {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestListSnapshots(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetEndBlock(), cli.Error()
+	return reqres.Response.GetListSnapshots(), nil
 }
 
-func (cli *socketClient) ListSnapshotsSync(req types.RequestListSnapshots) (*types.ResponseListSnapshots, error) {
-	reqres := cli.queueRequest(types.ToRequestListSnapshots(req))
-	if err := cli.FlushSync(); err != nil {
+func (cli *socketClient) OfferSnapshotSync(
+	ctx context.Context,
+	req types.RequestOfferSnapshot,
+) (*types.ResponseOfferSnapshot, error) {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestOfferSnapshot(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetListSnapshots(), cli.Error()
-}
-
-func (cli *socketClient) OfferSnapshotSync(req types.RequestOfferSnapshot) (*types.ResponseOfferSnapshot, error) {
-	reqres := cli.queueRequest(types.ToRequestOfferSnapshot(req))
-	if err := cli.FlushSync(); err != nil {
-		return nil, err
-	}
-
-	return reqres.Response.GetOfferSnapshot(), cli.Error()
+	return reqres.Response.GetOfferSnapshot(), nil
 }
 
 func (cli *socketClient) LoadSnapshotChunkSync(
+	ctx context.Context,
 	req types.RequestLoadSnapshotChunk) (*types.ResponseLoadSnapshotChunk, error) {
-	reqres := cli.queueRequest(types.ToRequestLoadSnapshotChunk(req))
-	if err := cli.FlushSync(); err != nil {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestLoadSnapshotChunk(req))
+	if err != nil {
 		return nil, err
 	}
-
-	return reqres.Response.GetLoadSnapshotChunk(), cli.Error()
+	return reqres.Response.GetLoadSnapshotChunk(), nil
 }
 
 func (cli *socketClient) ApplySnapshotChunkSync(
+	ctx context.Context,
 	req types.RequestApplySnapshotChunk) (*types.ResponseApplySnapshotChunk, error) {
-	reqres := cli.queueRequest(types.ToRequestApplySnapshotChunk(req))
-	if err := cli.FlushSync(); err != nil {
+
+	reqres, err := cli.queueRequestAndFlushSync(ctx, types.ToRequestApplySnapshotChunk(req))
+	if err != nil {
 		return nil, err
 	}
-	return reqres.Response.GetApplySnapshotChunk(), cli.Error()
+	return reqres.Response.GetApplySnapshotChunk(), nil
 }
 
 //----------------------------------------
 
-func (cli *socketClient) queueRequest(req *types.Request) *ReqRes {
+// queueRequest enqueues req onto the queue. If the queue is full, it ether
+// returns an error (sync=false) or blocks (sync=true).
+//
+// When sync=true, ctx can be used to break early. When sync=false, ctx will be
+// used later to determine if request should be dropped (if ctx.Err is
+// non-nil).
+//
+// The caller is responsible for checking cli.Error.
+func (cli *socketClient) queueRequest(ctx context.Context, req *types.Request, sync bool) (*ReqRes, error) {
 	reqres := NewReqRes(req)
 
-	// TODO: set cli.err if reqQueue times out
-	cli.reqQueue <- reqres
+	if sync {
+		select {
+		case cli.reqQueue <- &reqResWithContext{R: reqres, C: context.Background()}:
+		case <-ctx.Done():
+			return nil, ctx.Err()
+		}
+	} else {
+		select {
+		case cli.reqQueue <- &reqResWithContext{R: reqres, C: ctx}:
+		default:
+			return nil, errors.New("buffer is full")
+		}
+	}
 
 	// Maybe auto-flush, or unset auto-flush
 	switch req.Value.(type) {
@@ -433,7 +502,41 @@ func (cli *socketClient) queueRequest(req *types.Request) *ReqRes {
 		cli.flushTimer.Set()
 	}
 
-	return reqres
+	return reqres, nil
+}
+
+func (cli *socketClient) queueRequestAsync(
+	ctx context.Context,
+	req *types.Request,
+) (*ReqRes, error) {
+
+	reqres, err := cli.queueRequest(ctx, req, false)
+	if err != nil {
+		return nil, queueErr(err)
+	}
+
+	return reqres, cli.Error()
+}
+
+func (cli *socketClient) queueRequestAndFlushSync(
+	ctx context.Context,
+	req *types.Request,
+) (*ReqRes, error) {
+
+	reqres, err := cli.queueRequest(ctx, req, true)
+	if err != nil {
+		return nil, queueErr(err)
+	}
+
+	if err := cli.FlushSync(ctx); err != nil {
+		return nil, err
+	}
+
+	return reqres, cli.Error()
+}
+
+func queueErr(e error) error {
+	return fmt.Errorf("can't queue req: %w", e)
 }
 
 func (cli *socketClient) flushQueue() {
@@ -451,7 +554,7 @@ LOOP:
 	for {
 		select {
 		case reqres := <-cli.reqQueue:
-			reqres.Done()
+			reqres.R.Done()
 		default:
 			break LOOP
 		}
@@ -468,8 +571,6 @@ func resMatchesReq(req *types.Request, res *types.Response) (ok bool) {
 		_, ok = res.Value.(*types.Response_Flush)
 	case *types.Request_Info:
 		_, ok = res.Value.(*types.Response_Info)
-	case *types.Request_SetOption:
-		_, ok = res.Value.(*types.Response_SetOption)
 	case *types.Request_DeliverTx:
 		_, ok = res.Value.(*types.Response_DeliverTx)
 	case *types.Request_CheckTx:
@@ -502,12 +603,10 @@ func (cli *socketClient) stopForError(err error) {
 	}
 
 	cli.mtx.Lock()
-	if cli.err == nil {
-		cli.err = err
-	}
+	cli.err = err
 	cli.mtx.Unlock()
 
-	cli.Logger.Error(fmt.Sprintf("Stopping abci.socketClient for error: %v", err.Error()))
+	cli.Logger.Info("Stopping abci.socketClient", "reason", err)
 	if err := cli.Stop(); err != nil {
 		cli.Logger.Error("Error stopping abci.socketClient", "err", err)
 	}

abci/client/socket_client_test.go

@@ -1,6 +1,7 @@
 package abcicli_test
 
 import (
+	"context"
 	"fmt"
 	"testing"
 	"time"
@@ -15,6 +16,8 @@ import (
 	"github.com/tendermint/tendermint/libs/service"
 )
 
+var ctx = context.Background()
+
 func TestProperSyncCalls(t *testing.T) {
 	app := slowApp{}
 
@@ -33,11 +36,12 @@ func TestProperSyncCalls(t *testing.T) {
 	resp := make(chan error, 1)
 	go func() {
 		// This is BeginBlockSync unrolled....
-		reqres := c.BeginBlockAsync(types.RequestBeginBlock{})
-		err := c.FlushSync()
-		require.NoError(t, err)
+		reqres, err := c.BeginBlockAsync(ctx, types.RequestBeginBlock{})
+		assert.NoError(t, err)
+		err = c.FlushSync(context.Background())
+		assert.NoError(t, err)
 		res := reqres.Response.GetBeginBlock()
-		require.NotNil(t, res)
+		assert.NotNil(t, res)
 		resp <- c.Error()
 	}()
 
@@ -68,14 +72,16 @@ func TestHangingSyncCalls(t *testing.T) {
 	resp := make(chan error, 1)
 	go func() {
 		// Start BeginBlock and flush it
-		reqres := c.BeginBlockAsync(types.RequestBeginBlock{})
-		flush := c.FlushAsync()
+		reqres, err := c.BeginBlockAsync(ctx, types.RequestBeginBlock{})
+		assert.NoError(t, err)
+		flush, err := c.FlushAsync(ctx)
+		assert.NoError(t, err)
 		// wait 20 ms for all events to travel socket, but
 		// no response yet from server
 		time.Sleep(20 * time.Millisecond)
 		// kill the server, so the connections break
-		err := s.Stop()
-		require.NoError(t, err)
+		err = s.Stop()
+		assert.NoError(t, err)
 
 		// wait for the response from BeginBlock
 		reqres.Wait()

abci/cmd/abci-cli/abci-cli.go

@@ -2,6 +2,7 @@ package main
 
 import (
 	"bufio"
+	"context"
 	"encoding/hex"
 	"errors"
 	"fmt"
@@ -29,6 +30,8 @@ import (
 var (
 	client abcicli.Client
 	logger log.Logger
+
+	ctx = context.Background()
 )
 
 // flags
@@ -148,7 +151,6 @@ func addCommands() {
 	RootCmd.AddCommand(consoleCmd)
 	RootCmd.AddCommand(echoCmd)
 	RootCmd.AddCommand(infoCmd)
-	RootCmd.AddCommand(setOptionCmd)
 	RootCmd.AddCommand(deliverTxCmd)
 	RootCmd.AddCommand(checkTxCmd)
 	RootCmd.AddCommand(commitCmd)
@@ -176,7 +178,6 @@ you'd like to run:
 
 where example.file looks something like:
 
-    set_option serial on
     check_tx 0x00
     check_tx 0xff
     deliver_tx 0x00
@@ -198,7 +199,7 @@ This command opens an interactive console for running any of the other commands
 without opening a new connection each time
 `,
 	Args:      cobra.ExactArgs(0),
-	ValidArgs: []string{"echo", "info", "set_option", "deliver_tx", "check_tx", "commit", "query"},
+	ValidArgs: []string{"echo", "info", "deliver_tx", "check_tx", "commit", "query"},
 	RunE:      cmdConsole,
 }
 
@@ -216,13 +217,6 @@ var infoCmd = &cobra.Command{
 	Args:  cobra.ExactArgs(0),
 	RunE:  cmdInfo,
 }
-var setOptionCmd = &cobra.Command{
-	Use:   "set_option",
-	Short: "set an option on the application",
-	Long:  "set an option on the application",
-	Args:  cobra.ExactArgs(2),
-	RunE:  cmdSetOption,
-}
 
 var deliverTxCmd = &cobra.Command{
 	Use:   "deliver_tx",
@@ -324,7 +318,6 @@ func cmdTest(cmd *cobra.Command, args []string) error {
 	return compose(
 		[]func() error{
 			func() error { return servertest.InitChain(client) },
-			func() error { return servertest.SetOption(client, "serial", "on") },
 			func() error { return servertest.Commit(client, nil) },
 			func() error { return servertest.DeliverTx(client, []byte("abc"), code.CodeTypeBadNonce, nil) },
 			func() error { return servertest.Commit(client, nil) },
@@ -439,8 +432,6 @@ func muxOnCommands(cmd *cobra.Command, pArgs []string) error {
 		return cmdInfo(cmd, actualArgs)
 	case "query":
 		return cmdQuery(cmd, actualArgs)
-	case "set_option":
-		return cmdSetOption(cmd, actualArgs)
 	default:
 		return cmdUnimplemented(cmd, pArgs)
 	}
@@ -464,7 +455,6 @@ func cmdUnimplemented(cmd *cobra.Command, args []string) error {
 	fmt.Printf("%s: %s\n", deliverTxCmd.Use, deliverTxCmd.Short)
 	fmt.Printf("%s: %s\n", queryCmd.Use, queryCmd.Short)
 	fmt.Printf("%s: %s\n", commitCmd.Use, commitCmd.Short)
-	fmt.Printf("%s: %s\n", setOptionCmd.Use, setOptionCmd.Short)
 	fmt.Println("Use \"[command] --help\" for more information about a command.")
 
 	return nil
@@ -476,7 +466,7 @@ func cmdEcho(cmd *cobra.Command, args []string) error {
 	if len(args) > 0 {
 		msg = args[0]
 	}
-	res, err := client.EchoSync(msg)
+	res, err := client.EchoSync(ctx, msg)
 	if err != nil {
 		return err
 	}
@@ -492,7 +482,7 @@ func cmdInfo(cmd *cobra.Command, args []string) error {
 	if len(args) == 1 {
 		version = args[0]
 	}
-	res, err := client.InfoSync(types.RequestInfo{Version: version})
+	res, err := client.InfoSync(ctx, types.RequestInfo{Version: version})
 	if err != nil {
 		return err
 	}
@@ -504,25 +494,6 @@ func cmdInfo(cmd *cobra.Command, args []string) error {
 
 const codeBad uint32 = 10
 
-// Set an option on the application
-func cmdSetOption(cmd *cobra.Command, args []string) error {
-	if len(args) < 2 {
-		printResponse(cmd, args, response{
-			Code: codeBad,
-			Log:  "want at least arguments of the form: <key> <value>",
-		})
-		return nil
-	}
-
-	key, val := args[0], args[1]
-	_, err := client.SetOptionSync(types.RequestSetOption{Key: key, Value: val})
-	if err != nil {
-		return err
-	}
-	printResponse(cmd, args, response{Log: "OK (SetOption doesn't return anything.)"}) // NOTE: Nothing to show...
-	return nil
-}
-
 // Append a new tx to application
 func cmdDeliverTx(cmd *cobra.Command, args []string) error {
 	if len(args) == 0 {
@@ -536,7 +507,7 @@ func cmdDeliverTx(cmd *cobra.Command, args []string) error {
 	if err != nil {
 		return err
 	}
-	res, err := client.DeliverTxSync(types.RequestDeliverTx{Tx: txBytes})
+	res, err := client.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: txBytes})
 	if err != nil {
 		return err
 	}
@@ -562,7 +533,7 @@ func cmdCheckTx(cmd *cobra.Command, args []string) error {
 	if err != nil {
 		return err
 	}
-	res, err := client.CheckTxSync(types.RequestCheckTx{Tx: txBytes})
+	res, err := client.CheckTxSync(ctx, types.RequestCheckTx{Tx: txBytes})
 	if err != nil {
 		return err
 	}
@@ -577,7 +548,7 @@ func cmdCheckTx(cmd *cobra.Command, args []string) error {
 
 // Get application Merkle root hash
 func cmdCommit(cmd *cobra.Command, args []string) error {
-	res, err := client.CommitSync()
+	res, err := client.CommitSync(ctx)
 	if err != nil {
 		return err
 	}
@@ -602,7 +573,7 @@ func cmdQuery(cmd *cobra.Command, args []string) error {
 		return err
 	}
 
-	resQuery, err := client.QuerySync(types.RequestQuery{
+	resQuery, err := client.QuerySync(ctx, types.RequestQuery{
 		Data:   queryBytes,
 		Path:   flagPath,
 		Height: int64(flagHeight),

abci/example/counter/counter.go

@@ -24,24 +24,6 @@ func (app *Application) Info(req types.RequestInfo) types.ResponseInfo {
 	return types.ResponseInfo{Data: fmt.Sprintf("{\"hashes\":%v,\"txs\":%v}", app.hashCount, app.txCount)}
 }
 
-func (app *Application) SetOption(req types.RequestSetOption) types.ResponseSetOption {
-	key, value := req.Key, req.Value
-	if key == "serial" && value == "on" {
-		app.serial = true
-	} else {
-		/*
-			TODO Panic and have the ABCI server pass an exception.
-			The client can call SetOptionSync() and get an `error`.
-			return types.ResponseSetOption{
-				Error: fmt.Sprintf("Unknown key (%s) or value (%s)", key, value),
-			}
-		*/
-		return types.ResponseSetOption{}
-	}
-
-	return types.ResponseSetOption{}
-}
-
 func (app *Application) DeliverTx(req types.RequestDeliverTx) types.ResponseDeliverTx {
 	if app.serial {
 		if len(req.Tx) > 8 {
@@ -69,6 +51,7 @@ func (app *Application) CheckTx(req types.RequestCheckTx) types.ResponseCheckTx
 				Code: code.CodeTypeEncodingError,
 				Log:  fmt.Sprintf("Max tx size is 8 bytes, got %d", len(req.Tx))}
 		}
+
 		tx8 := make([]byte, 8)
 		copy(tx8[len(tx8)-len(req.Tx):], req.Tx)
 		txValue := binary.BigEndian.Uint64(tx8)

abci/example/example_test.go

@@ -1,6 +1,7 @@
 package example
 
 import (
+	"context"
 	"fmt"
 	"math/rand"
 	"net"
@@ -13,8 +14,6 @@ import (
 
 	"google.golang.org/grpc"
 
-	"golang.org/x/net/context"
-
 	"github.com/tendermint/tendermint/libs/log"
 	tmnet "github.com/tendermint/tendermint/libs/net"
 
@@ -45,7 +44,7 @@ func TestGRPC(t *testing.T) {
 }
 
 func testStream(t *testing.T, app types.Application) {
-	numDeliverTxs := 20000
+	const numDeliverTxs = 20000
 	socketFile := fmt.Sprintf("test-%08x.sock", rand.Int31n(1<<30))
 	defer os.Remove(socketFile)
 	socket := fmt.Sprintf("unix://%v", socketFile)
@@ -53,9 +52,8 @@ func testStream(t *testing.T, app types.Application) {
 	// Start the listener
 	server := abciserver.NewSocketServer(socket, app)
 	server.SetLogger(log.TestingLogger().With("module", "abci-server"))
-	if err := server.Start(); err != nil {
-		require.NoError(t, err, "Error starting socket server")
-	}
+	err := server.Start()
+	require.NoError(t, err)
 	t.Cleanup(func() {
 		if err := server.Stop(); err != nil {
 			t.Error(err)
@@ -65,9 +63,8 @@ func testStream(t *testing.T, app types.Application) {
 	// Connect to the socket
 	client := abcicli.NewSocketClient(socket, false)
 	client.SetLogger(log.TestingLogger().With("module", "abci-client"))
-	if err := client.Start(); err != nil {
-		t.Fatalf("Error starting socket client: %v", err.Error())
-	}
+	err = client.Start()
+	require.NoError(t, err)
 	t.Cleanup(func() {
 		if err := client.Stop(); err != nil {
 			t.Error(err)
@@ -101,22 +98,24 @@ func testStream(t *testing.T, app types.Application) {
 		}
 	})
 
+	ctx := context.Background()
+
 	// Write requests
 	for counter := 0; counter < numDeliverTxs; counter++ {
 		// Send request
-		reqRes := client.DeliverTxAsync(types.RequestDeliverTx{Tx: []byte("test")})
-		_ = reqRes
-		// check err ?
+		_, err = client.DeliverTxAsync(ctx, types.RequestDeliverTx{Tx: []byte("test")})
+		require.NoError(t, err)
 
 		// Sometimes send flush messages
-		if counter%123 == 0 {
-			client.FlushAsync()
-			// check err ?
+		if counter%128 == 0 {
+			err = client.FlushSync(context.Background())
+			require.NoError(t, err)
 		}
 	}
 
 	// Send final flush message
-	client.FlushAsync()
+	_, err = client.FlushAsync(ctx)
+	require.NoError(t, err)
 
 	<-done
 }

abci/example/kvstore/kvstore_test.go

@@ -1,6 +1,7 @@
 package kvstore
 
 import (
+	"context"
 	"fmt"
 	"io/ioutil"
 	"sort"
@@ -23,6 +24,8 @@ const (
 	testValue = "def"
 )
 
+var ctx = context.Background()
+
 func testKVStore(t *testing.T, app types.Application, tx []byte, key, value string) {
 	req := types.RequestDeliverTx{Tx: tx}
 	ar := app.DeliverTx(req)
@@ -323,23 +326,23 @@ func runClientTests(t *testing.T, client abcicli.Client) {
 }
 
 func testClient(t *testing.T, app abcicli.Client, tx []byte, key, value string) {
-	ar, err := app.DeliverTxSync(types.RequestDeliverTx{Tx: tx})
+	ar, err := app.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: tx})
 	require.NoError(t, err)
 	require.False(t, ar.IsErr(), ar)
 	// repeating tx doesn't raise error
-	ar, err = app.DeliverTxSync(types.RequestDeliverTx{Tx: tx})
+	ar, err = app.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: tx})
 	require.NoError(t, err)
 	require.False(t, ar.IsErr(), ar)
 	// commit
-	_, err = app.CommitSync()
+	_, err = app.CommitSync(ctx)
 	require.NoError(t, err)
 
-	info, err := app.InfoSync(types.RequestInfo{})
+	info, err := app.InfoSync(ctx, types.RequestInfo{})
 	require.NoError(t, err)
 	require.NotZero(t, info.LastBlockHeight)
 
 	// make sure query is fine
-	resQuery, err := app.QuerySync(types.RequestQuery{
+	resQuery, err := app.QuerySync(ctx, types.RequestQuery{
 		Path: "/store",
 		Data: []byte(key),
 	})
@@ -350,7 +353,7 @@ func testClient(t *testing.T, app abcicli.Client, tx []byte, key, value string)
 	require.EqualValues(t, info.LastBlockHeight, resQuery.Height)
 
 	// make sure proof is fine
-	resQuery, err = app.QuerySync(types.RequestQuery{
+	resQuery, err = app.QuerySync(ctx, types.RequestQuery{
 		Path:  "/store",
 		Data:  []byte(key),
 		Prove: true,

abci/example/kvstore/persistent_kvstore.go

@@ -62,10 +62,6 @@ func (app *PersistentKVStoreApplication) Info(req types.RequestInfo) types.Respo
 	return res
 }
 
-func (app *PersistentKVStoreApplication) SetOption(req types.RequestSetOption) types.ResponseSetOption {
-	return app.app.SetOption(req)
-}
-
 // tx is either "val:pubkey!power" or "key=value" or just arbitrary bytes
 func (app *PersistentKVStoreApplication) DeliverTx(req types.RequestDeliverTx) types.ResponseDeliverTx {
 	// if it starts with "val:", update the validator set

abci/server/socket_server.go

@@ -200,9 +200,6 @@ func (s *SocketServer) handleRequest(req *types.Request, responses chan<- *types
 	case *types.Request_Info:
 		res := s.app.Info(*r.Info)
 		responses <- types.ToResponseInfo(res)
-	case *types.Request_SetOption:
-		res := s.app.SetOption(*r.SetOption)
-		responses <- types.ToResponseSetOption(res)
 	case *types.Request_DeliverTx:
 		res := s.app.DeliverTx(*r.DeliverTx)
 		responses <- types.ToResponseDeliverTx(res)

abci/tests/server/client.go

@@ -2,6 +2,7 @@ package testsuite
 
 import (
 	"bytes"
+	"context"
 	"errors"
 	"fmt"
 
@@ -10,6 +11,8 @@ import (
 	tmrand "github.com/tendermint/tendermint/libs/rand"
 )
 
+var ctx = context.Background()
+
 func InitChain(client abcicli.Client) error {
 	total := 10
 	vals := make([]types.ValidatorUpdate, total)
@@ -18,7 +21,7 @@ func InitChain(client abcicli.Client) error {
 		power := tmrand.Int()
 		vals[i] = types.UpdateValidator(pubkey, int64(power), "")
 	}
-	_, err := client.InitChainSync(types.RequestInitChain{
+	_, err := client.InitChainSync(ctx, types.RequestInitChain{
 		Validators: vals,
 	})
 	if err != nil {
@@ -29,19 +32,8 @@ func InitChain(client abcicli.Client) error {
 	return nil
 }
 
-func SetOption(client abcicli.Client, key, value string) error {
-	_, err := client.SetOptionSync(types.RequestSetOption{Key: key, Value: value})
-	if err != nil {
-		fmt.Println("Failed test: SetOption")
-		fmt.Printf("error while setting %v=%v: \nerror: %v\n", key, value, err)
-		return err
-	}
-	fmt.Println("Passed test: SetOption")
-	return nil
-}
-
 func Commit(client abcicli.Client, hashExp []byte) error {
-	res, err := client.CommitSync()
+	res, err := client.CommitSync(ctx)
 	data := res.Data
 	if err != nil {
 		fmt.Println("Failed test: Commit")
@@ -58,7 +50,7 @@ func Commit(client abcicli.Client, hashExp []byte) error {
 }
 
 func DeliverTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []byte) error {
-	res, _ := client.DeliverTxSync(types.RequestDeliverTx{Tx: txBytes})
+	res, _ := client.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: txBytes})
 	code, data, log := res.Code, res.Data, res.Log
 	if code != codeExp {
 		fmt.Println("Failed test: DeliverTx")
@@ -77,7 +69,7 @@ func DeliverTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []
 }
 
 func CheckTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []byte) error {
-	res, _ := client.CheckTxSync(types.RequestCheckTx{Tx: txBytes})
+	res, _ := client.CheckTxSync(ctx, types.RequestCheckTx{Tx: txBytes})
 	code, data, log := res.Code, res.Data, res.Log
 	if code != codeExp {
 		fmt.Println("Failed test: CheckTx")

abci/tests/test_app/app.go

@@ -2,6 +2,7 @@ package main
 
 import (
 	"bytes"
+	"context"
 	"fmt"
 	"os"
 
@@ -10,6 +11,8 @@ import (
 	"github.com/tendermint/tendermint/libs/log"
 )
 
+var ctx = context.Background()
+
 func startClient(abciType string) abcicli.Client {
 	// Start client
 	client, err := abcicli.NewClient("tcp://127.0.0.1:26658", abciType, true)
@@ -25,15 +28,8 @@ func startClient(abciType string) abcicli.Client {
 	return client
 }
 
-func setOption(client abcicli.Client, key, value string) {
-	_, err := client.SetOptionSync(types.RequestSetOption{Key: key, Value: value})
-	if err != nil {
-		panicf("setting %v=%v: \nerr: %v", key, value, err)
-	}
-}
-
 func commit(client abcicli.Client, hashExp []byte) {
-	res, err := client.CommitSync()
+	res, err := client.CommitSync(ctx)
 	if err != nil {
 		panicf("client error: %v", err)
 	}
@@ -43,7 +39,7 @@ func commit(client abcicli.Client, hashExp []byte) {
 }
 
 func deliverTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []byte) {
-	res, err := client.DeliverTxSync(types.RequestDeliverTx{Tx: txBytes})
+	res, err := client.DeliverTxSync(ctx, types.RequestDeliverTx{Tx: txBytes})
 	if err != nil {
 		panicf("client error: %v", err)
 	}
@@ -55,24 +51,6 @@ func deliverTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []
 	}
 }
 
-/*func checkTx(client abcicli.Client, txBytes []byte, codeExp uint32, dataExp []byte) {
-	res, err := client.CheckTxSync(txBytes)
-	if err != nil {
-		panicf("client error: %v", err)
-	}
-	if res.IsErr() {
-		panicf("checking tx %X: %v\nlog: %v", txBytes, res.Log)
-	}
-	if res.Code != codeExp {
-		panicf("CheckTx response code was unexpected. Got %v expected %v. Log: %v",
-			res.Code, codeExp, res.Log)
-	}
-	if !bytes.Equal(res.Data, dataExp) {
-		panicf("CheckTx response data was unexpected. Got %X expected %X",
-			res.Data, dataExp)
-	}
-}*/
-
 func panicf(format string, a ...interface{}) {
 	panic(fmt.Sprintf(format, a...))
 }

abci/tests/test_app/main.go

@@ -7,7 +7,6 @@ import (
 	"os/exec"
 	"time"
 
-	"github.com/tendermint/tendermint/abci/example/code"
 	"github.com/tendermint/tendermint/abci/types"
 )
 
@@ -41,7 +40,7 @@ func ensureABCIIsUp(typ string, n int) error {
 		if err == nil {
 			break
 		}
-		<-time.After(500 * time.Millisecond)
+		time.Sleep(500 * time.Millisecond)
 	}
 	return err
 }
@@ -79,17 +78,16 @@ func testCounter() {
 		}
 	}()
 
-	setOption(client, "serial", "on")
-	commit(client, nil)
-	deliverTx(client, []byte("abc"), code.CodeTypeBadNonce, nil)
+	// commit(client, nil)
+	// deliverTx(client, []byte("abc"), code.CodeTypeBadNonce, nil)
 	commit(client, nil)
 	deliverTx(client, []byte{0x00}, types.CodeTypeOK, nil)
 	commit(client, []byte{0, 0, 0, 0, 0, 0, 0, 1})
-	deliverTx(client, []byte{0x00}, code.CodeTypeBadNonce, nil)
+	// deliverTx(client, []byte{0x00}, code.CodeTypeBadNonce, nil)
 	deliverTx(client, []byte{0x01}, types.CodeTypeOK, nil)
 	deliverTx(client, []byte{0x00, 0x02}, types.CodeTypeOK, nil)
 	deliverTx(client, []byte{0x00, 0x03}, types.CodeTypeOK, nil)
 	deliverTx(client, []byte{0x00, 0x00, 0x04}, types.CodeTypeOK, nil)
-	deliverTx(client, []byte{0x00, 0x00, 0x06}, code.CodeTypeBadNonce, nil)
+	// deliverTx(client, []byte{0x00, 0x00, 0x06}, code.CodeTypeBadNonce, nil)
 	commit(client, []byte{0, 0, 0, 0, 0, 0, 0, 5})
 }

abci/tests/test_cli/ex2.abci

@@ -1,4 +1,3 @@
-set_option serial on
 check_tx 0x00
 check_tx 0xff
 deliver_tx 0x00

abci/tests/test_cli/ex2.abci.out

@@ -1,7 +1,3 @@
-> set_option serial on
--> code: OK
--> log: OK (SetOption doesn't return anything.)
-
 > check_tx 0x00
 -> code: OK
 
@@ -12,18 +8,16 @@
 -> code: OK
 
 > check_tx 0x00
--> code: 2
--> log: Invalid nonce. Expected >= 1, got 0
+-> code: OK
 
 > deliver_tx 0x01
 -> code: OK
 
 > deliver_tx 0x04
--> code: 2
--> log: Invalid nonce. Expected 2, got 4
+-> code: OK
 
 > info 
 -> code: OK
--> data: {"hashes":0,"txs":2}
--> data.hex: 0x7B22686173686573223A302C22747873223A327D
+-> data: {"hashes":0,"txs":3}
+-> data.hex: 0x7B22686173686573223A302C22747873223A337D
 

abci/types/application.go

@@ -1,7 +1,7 @@
 package types
 
 import (
-	context "golang.org/x/net/context"
+	"context"
 )
 
 // Application is an interface that enables any finite, deterministic state machine
@@ -10,9 +10,8 @@ import (
 // except CheckTx/DeliverTx, which take `tx []byte`, and `Commit`, which takes nothing.
 type Application interface {
 	// Info/Query Connection
-	Info(RequestInfo) ResponseInfo                // Return application info
-	SetOption(RequestSetOption) ResponseSetOption // Set application option
-	Query(RequestQuery) ResponseQuery             // Query for state
+	Info(RequestInfo) ResponseInfo    // Return application info
+	Query(RequestQuery) ResponseQuery // Query for state
 
 	// Mempool Connection
 	CheckTx(RequestCheckTx) ResponseCheckTx // Validate a tx for the mempool
@@ -47,10 +46,6 @@ func (BaseApplication) Info(req RequestInfo) ResponseInfo {
 	return ResponseInfo{}
 }
 
-func (BaseApplication) SetOption(req RequestSetOption) ResponseSetOption {
-	return ResponseSetOption{}
-}
-
 func (BaseApplication) DeliverTx(req RequestDeliverTx) ResponseDeliverTx {
 	return ResponseDeliverTx{Code: CodeTypeOK}
 }
@@ -119,11 +114,6 @@ func (app *GRPCApplication) Info(ctx context.Context, req *RequestInfo) (*Respon
 	return &res, nil
 }
 
-func (app *GRPCApplication) SetOption(ctx context.Context, req *RequestSetOption) (*ResponseSetOption, error) {
-	res := app.app.SetOption(*req)
-	return &res, nil
-}
-
 func (app *GRPCApplication) DeliverTx(ctx context.Context, req *RequestDeliverTx) (*ResponseDeliverTx, error) {
 	res := app.app.DeliverTx(*req)
 	return &res, nil

abci/types/messages.go

@@ -1,11 +1,10 @@
 package types
 
 import (
-	"bufio"
-	"encoding/binary"
 	"io"
 
 	"github.com/gogo/protobuf/proto"
+	"github.com/tendermint/tendermint/libs/protoio"
 )
 
 const (
@@ -14,57 +13,19 @@ const (
 
 // WriteMessage writes a varint length-delimited protobuf message.
 func WriteMessage(msg proto.Message, w io.Writer) error {
-	bz, err := proto.Marshal(msg)
+	protoWriter := protoio.NewDelimitedWriter(w)
+	_, err := protoWriter.WriteMsg(msg)
 	if err != nil {
 		return err
 	}
-	return encodeByteSlice(w, bz)
+
+	return nil
 }
 
 // ReadMessage reads a varint length-delimited protobuf message.
 func ReadMessage(r io.Reader, msg proto.Message) error {
-	return readProtoMsg(r, msg, maxMsgSize)
-}
-
-func readProtoMsg(r io.Reader, msg proto.Message, maxSize int) error {
-	// binary.ReadVarint takes an io.ByteReader, eg. a bufio.Reader
-	reader, ok := r.(*bufio.Reader)
-	if !ok {
-		reader = bufio.NewReader(r)
-	}
-	length64, err := binary.ReadVarint(reader)
-	if err != nil {
-		return err
-	}
-	length := int(length64)
-	if length < 0 || length > maxSize {
-		return io.ErrShortBuffer
-	}
-	buf := make([]byte, length)
-	if _, err := io.ReadFull(reader, buf); err != nil {
-		return err
-	}
-	return proto.Unmarshal(buf, msg)
-}
-
-//-----------------------------------------------------------------------
-// NOTE: we copied wire.EncodeByteSlice from go-wire rather than keep
-// go-wire as a dep
-
-func encodeByteSlice(w io.Writer, bz []byte) (err error) {
-	err = encodeVarint(w, int64(len(bz)))
-	if err != nil {
-		return
-	}
-	_, err = w.Write(bz)
-	return
-}
-
-func encodeVarint(w io.Writer, i int64) (err error) {
-	var buf [10]byte
-	n := binary.PutVarint(buf[:], i)
-	_, err = w.Write(buf[0:n])
-	return
+	_, err := protoio.NewDelimitedReader(r, maxMsgSize).ReadMsg(msg)
+	return err
 }
 
 //----------------------------------------
@@ -87,12 +48,6 @@ func ToRequestInfo(req RequestInfo) *Request {
 	}
 }
 
-func ToRequestSetOption(req RequestSetOption) *Request {
-	return &Request{
-		Value: &Request_SetOption{&req},
-	}
-}
-
 func ToRequestDeliverTx(req RequestDeliverTx) *Request {
 	return &Request{
 		Value: &Request_DeliverTx{&req},
@@ -184,13 +139,6 @@ func ToResponseInfo(res ResponseInfo) *Response {
 		Value: &Response_Info{&res},
 	}
 }
-
-func ToResponseSetOption(res ResponseSetOption) *Response {
-	return &Response{
-		Value: &Response_SetOption{&res},
-	}
-}
-
 func ToResponseDeliverTx(res ResponseDeliverTx) *Response {
 	return &Response{
 		Value: &Response_DeliverTx{&res},

abci/types/result.go

@@ -52,16 +52,6 @@ var (
 	jsonpbUnmarshaller = jsonpb.Unmarshaler{}
 )
 
-func (r *ResponseSetOption) MarshalJSON() ([]byte, error) {
-	s, err := jsonpbMarshaller.MarshalToString(r)
-	return []byte(s), err
-}
-
-func (r *ResponseSetOption) UnmarshalJSON(b []byte) error {
-	reader := bytes.NewBuffer(b)
-	return jsonpbUnmarshaller.Unmarshal(reader, r)
-}
-
 func (r *ResponseCheckTx) MarshalJSON() ([]byte, error) {
 	s, err := jsonpbMarshaller.MarshalToString(r)
 	return []byte(s), err
@@ -126,6 +116,5 @@ var _ jsonRoundTripper = (*ResponseCommit)(nil)
 var _ jsonRoundTripper = (*ResponseQuery)(nil)
 var _ jsonRoundTripper = (*ResponseDeliverTx)(nil)
 var _ jsonRoundTripper = (*ResponseCheckTx)(nil)
-var _ jsonRoundTripper = (*ResponseSetOption)(nil)
 
 var _ jsonRoundTripper = (*EventAttribute)(nil)

appveyor.yml

@@ -1,12 +0,0 @@
-version: 1.0.{build}
-configuration: Release
-platform:
-- x64
-- x86
-clone_folder: c:\go\path\src\github.com\tendermint\tendermint
-before_build:
-- cmd: set GOPATH=%GOROOT%\path
-- cmd: set PATH=%GOPATH%\bin;%PATH%
-build_script:
-- cmd: make test
-test: off

behaviour/peer_behaviour.go

@@ -8,7 +8,7 @@ import (
 // `peerID` identifies the peer and reason characterizes the specific
 // behaviour performed by the peer.
 type PeerBehaviour struct {
-	peerID p2p.ID
+	peerID p2p.NodeID
 	reason interface{}
 }
 
@@ -17,7 +17,7 @@ type badMessage struct {
 }
 
 // BadMessage returns a badMessage PeerBehaviour.
-func BadMessage(peerID p2p.ID, explanation string) PeerBehaviour {
+func BadMessage(peerID p2p.NodeID, explanation string) PeerBehaviour {
 	return PeerBehaviour{peerID: peerID, reason: badMessage{explanation}}
 }
 
@@ -26,7 +26,7 @@ type messageOutOfOrder struct {
 }
 
 // MessageOutOfOrder returns a messagOutOfOrder PeerBehaviour.
-func MessageOutOfOrder(peerID p2p.ID, explanation string) PeerBehaviour {
+func MessageOutOfOrder(peerID p2p.NodeID, explanation string) PeerBehaviour {
 	return PeerBehaviour{peerID: peerID, reason: messageOutOfOrder{explanation}}
 }
 
@@ -35,7 +35,7 @@ type consensusVote struct {
 }
 
 // ConsensusVote returns a consensusVote PeerBehaviour.
-func ConsensusVote(peerID p2p.ID, explanation string) PeerBehaviour {
+func ConsensusVote(peerID p2p.NodeID, explanation string) PeerBehaviour {
 	return PeerBehaviour{peerID: peerID, reason: consensusVote{explanation}}
 }
 
@@ -44,6 +44,6 @@ type blockPart struct {
 }
 
 // BlockPart returns blockPart PeerBehaviour.
-func BlockPart(peerID p2p.ID, explanation string) PeerBehaviour {
+func BlockPart(peerID p2p.NodeID, explanation string) PeerBehaviour {
 	return PeerBehaviour{peerID: peerID, reason: blockPart{explanation}}
 }

behaviour/reporter.go

@@ -51,14 +51,14 @@ func (spbr *SwitchReporter) Report(behaviour PeerBehaviour) error {
 // behaviour in manufactured scenarios.
 type MockReporter struct {
 	mtx tmsync.RWMutex
-	pb  map[p2p.ID][]PeerBehaviour
+	pb  map[p2p.NodeID][]PeerBehaviour
 }
 
 // NewMockReporter returns a Reporter which records all reported
 // behaviours in memory.
 func NewMockReporter() *MockReporter {
 	return &MockReporter{
-		pb: map[p2p.ID][]PeerBehaviour{},
+		pb: map[p2p.NodeID][]PeerBehaviour{},
 	}
 }
 
@@ -72,7 +72,7 @@ func (mpbr *MockReporter) Report(behaviour PeerBehaviour) error {
 }
 
 // GetBehaviours returns all behaviours reported on the peer identified by peerID.
-func (mpbr *MockReporter) GetBehaviours(peerID p2p.ID) []PeerBehaviour {
+func (mpbr *MockReporter) GetBehaviours(peerID p2p.NodeID) []PeerBehaviour {
 	mpbr.mtx.RLock()
 	defer mpbr.mtx.RUnlock()
 	if items, ok := mpbr.pb[peerID]; ok {

behaviour/reporter_test.go

@@ -11,7 +11,7 @@ import (
 // TestMockReporter tests the MockReporter's ability to store reported
 // peer behaviour in memory indexed by the peerID.
 func TestMockReporter(t *testing.T) {
-	var peerID p2p.ID = "MockPeer"
+	var peerID p2p.NodeID = "MockPeer"
 	pr := bh.NewMockReporter()
 
 	behaviours := pr.GetBehaviours(peerID)
@@ -34,7 +34,7 @@ func TestMockReporter(t *testing.T) {
 }
 
 type scriptItem struct {
-	peerID    p2p.ID
+	peerID    p2p.NodeID
 	behaviour bh.PeerBehaviour
 }
 
@@ -76,10 +76,10 @@ func equalBehaviours(a []bh.PeerBehaviour, b []bh.PeerBehaviour) bool {
 // freequencies that those behaviours occur.
 func TestEqualPeerBehaviours(t *testing.T) {
 	var (
-		peerID        p2p.ID = "MockPeer"
-		consensusVote        = bh.ConsensusVote(peerID, "voted")
-		blockPart            = bh.BlockPart(peerID, "blocked")
-		equals               = []struct {
+		peerID        p2p.NodeID = "MockPeer"
+		consensusVote            = bh.ConsensusVote(peerID, "voted")
+		blockPart                = bh.BlockPart(peerID, "blocked")
+		equals                   = []struct {
 			left  []bh.PeerBehaviour
 			right []bh.PeerBehaviour
 		}{
@@ -128,7 +128,7 @@ func TestEqualPeerBehaviours(t *testing.T) {
 func TestMockPeerBehaviourReporterConcurrency(t *testing.T) {
 	var (
 		behaviourScript = []struct {
-			peerID     p2p.ID
+			peerID     p2p.NodeID
 			behaviours []bh.PeerBehaviour
 		}{
 			{"1", []bh.PeerBehaviour{bh.ConsensusVote("1", "")}},

blockchain/doc.go

@@ -0,0 +1,17 @@
+/*
+Package blockchain provides two implementations of the fast-sync protocol.
+
+- v0 was the very first implementation. it's battle tested, but does not have a
+lot of test coverage.
+- v2 is the newest implementation, with a focus on testability and readability.
+
+Check out ADR-40 for the formal model and requirements.
+
+# Termination criteria
+
+1. the maximum peer height is reached
+2. termination timeout is triggered, which is set if the peer set is empty or
+there are no pending requests.
+
+*/
+package blockchain

blockchain/msgs.go

@@ -1,110 +1,12 @@
 package blockchain
 
 import (
-	"errors"
-	"fmt"
-
-	"github.com/gogo/protobuf/proto"
-
 	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
 	"github.com/tendermint/tendermint/types"
 )
 
 const (
-	// NOTE: keep up to date with bcproto.BlockResponse
-	BlockResponseMessagePrefixSize   = 4
-	BlockResponseMessageFieldKeySize = 1
-	MaxMsgSize                       = types.MaxBlockSizeBytes +
-		BlockResponseMessagePrefixSize +
-		BlockResponseMessageFieldKeySize
+	MaxMsgSize = types.MaxBlockSizeBytes +
+		bcproto.BlockResponseMessagePrefixSize +
+		bcproto.BlockResponseMessageFieldKeySize
 )
-
-// EncodeMsg encodes a Protobuf message
-func EncodeMsg(pb proto.Message) ([]byte, error) {
-	msg := bcproto.Message{}
-
-	switch pb := pb.(type) {
-	case *bcproto.BlockRequest:
-		msg.Sum = &bcproto.Message_BlockRequest{BlockRequest: pb}
-	case *bcproto.BlockResponse:
-		msg.Sum = &bcproto.Message_BlockResponse{BlockResponse: pb}
-	case *bcproto.NoBlockResponse:
-		msg.Sum = &bcproto.Message_NoBlockResponse{NoBlockResponse: pb}
-	case *bcproto.StatusRequest:
-		msg.Sum = &bcproto.Message_StatusRequest{StatusRequest: pb}
-	case *bcproto.StatusResponse:
-		msg.Sum = &bcproto.Message_StatusResponse{StatusResponse: pb}
-	default:
-		return nil, fmt.Errorf("unknown message type %T", pb)
-	}
-
-	bz, err := proto.Marshal(&msg)
-	if err != nil {
-		return nil, fmt.Errorf("unable to marshal %T: %w", pb, err)
-	}
-
-	return bz, nil
-}
-
-// DecodeMsg decodes a Protobuf message.
-func DecodeMsg(bz []byte) (proto.Message, error) {
-	pb := &bcproto.Message{}
-
-	err := proto.Unmarshal(bz, pb)
-	if err != nil {
-		return nil, err
-	}
-
-	switch msg := pb.Sum.(type) {
-	case *bcproto.Message_BlockRequest:
-		return msg.BlockRequest, nil
-	case *bcproto.Message_BlockResponse:
-		return msg.BlockResponse, nil
-	case *bcproto.Message_NoBlockResponse:
-		return msg.NoBlockResponse, nil
-	case *bcproto.Message_StatusRequest:
-		return msg.StatusRequest, nil
-	case *bcproto.Message_StatusResponse:
-		return msg.StatusResponse, nil
-	default:
-		return nil, fmt.Errorf("unknown message type %T", msg)
-	}
-}
-
-// ValidateMsg validates a message.
-func ValidateMsg(pb proto.Message) error {
-	if pb == nil {
-		return errors.New("message cannot be nil")
-	}
-
-	switch msg := pb.(type) {
-	case *bcproto.BlockRequest:
-		if msg.Height < 0 {
-			return errors.New("negative Height")
-		}
-	case *bcproto.BlockResponse:
-		_, err := types.BlockFromProto(msg.Block)
-		if err != nil {
-			return err
-		}
-	case *bcproto.NoBlockResponse:
-		if msg.Height < 0 {
-			return errors.New("negative Height")
-		}
-	case *bcproto.StatusResponse:
-		if msg.Base < 0 {
-			return errors.New("negative Base")
-		}
-		if msg.Height < 0 {
-			return errors.New("negative Height")
-		}
-		if msg.Base > msg.Height {
-			return fmt.Errorf("base %v cannot be greater than height %v", msg.Base, msg.Height)
-		}
-	case *bcproto.StatusRequest:
-		return nil
-	default:
-		return fmt.Errorf("unknown message type %T", msg)
-	}
-	return nil
-}

blockchain/v0/pool.go

@@ -30,6 +30,7 @@ eg, L = latency = 0.1s
 const (
 	requestIntervalMS         = 2
 	maxTotalRequesters        = 600
+	maxPeerErrBuffer          = 1000
 	maxPendingRequests        = maxTotalRequesters
 	maxPendingRequestsPerPeer = 20
 
@@ -58,17 +59,24 @@ var peerTimeout = 15 * time.Second // not const so we can override with tests
 	are not at peer limits, we can probably switch to consensus reactor
 */
 
+// BlockRequest stores a block request identified by the block Height and the
+// PeerID responsible for delivering the block.
+type BlockRequest struct {
+	Height int64
+	PeerID p2p.NodeID
+}
+
 // BlockPool keeps track of the fast sync peers, block requests and block responses.
 type BlockPool struct {
 	service.BaseService
-	startTime time.Time
+	lastAdvance time.Time
 
-	mtx tmsync.Mutex
+	mtx tmsync.RWMutex
 	// block requests
 	requesters map[int64]*bpRequester
 	height     int64 // the lowest key in requesters.
 	// peers
-	peers         map[p2p.ID]*bpPeer
+	peers         map[p2p.NodeID]*bpPeer
 	maxPeerHeight int64 // the biggest reported height
 
 	// atomic
@@ -82,7 +90,7 @@ type BlockPool struct {
 // requests and errors will be sent to requestsCh and errorsCh accordingly.
 func NewBlockPool(start int64, requestsCh chan<- BlockRequest, errorsCh chan<- peerError) *BlockPool {
 	bp := &BlockPool{
-		peers: make(map[p2p.ID]*bpPeer),
+		peers: make(map[p2p.NodeID]*bpPeer),
 
 		requesters: make(map[int64]*bpRequester),
 		height:     start,
@@ -98,8 +106,8 @@ func NewBlockPool(start int64, requestsCh chan<- BlockRequest, errorsCh chan<- p
 // OnStart implements service.Service by spawning requesters routine and recording
 // pool's start time.
 func (pool *BlockPool) OnStart() error {
+	pool.lastAdvance = time.Now()
 	go pool.makeRequestersRoutine()
-	pool.startTime = time.Now()
 	return nil
 }
 
@@ -134,6 +142,7 @@ func (pool *BlockPool) removeTimedoutPeers() {
 	defer pool.mtx.Unlock()
 
 	for _, peer := range pool.peers {
+		// check if peer timed out
 		if !peer.didTimeout && peer.numPending > 0 {
 			curRate := peer.recvMonitor.Status().CurRate
 			// curRate can be 0 on start
@@ -147,6 +156,7 @@ func (pool *BlockPool) removeTimedoutPeers() {
 				peer.didTimeout = true
 			}
 		}
+
 		if peer.didTimeout {
 			pool.removePeer(peer.id)
 		}
@@ -156,33 +166,25 @@ func (pool *BlockPool) removeTimedoutPeers() {
 // GetStatus returns pool's height, numPending requests and the number of
 // requesters.
 func (pool *BlockPool) GetStatus() (height int64, numPending int32, lenRequesters int) {
-	pool.mtx.Lock()
-	defer pool.mtx.Unlock()
+	pool.mtx.RLock()
+	defer pool.mtx.RUnlock()
 
 	return pool.height, atomic.LoadInt32(&pool.numPending), len(pool.requesters)
 }
 
 // IsCaughtUp returns true if this node is caught up, false - otherwise.
-// TODO: relax conditions, prevent abuse.
 func (pool *BlockPool) IsCaughtUp() bool {
-	pool.mtx.Lock()
-	defer pool.mtx.Unlock()
+	pool.mtx.RLock()
+	defer pool.mtx.RUnlock()
 
 	// Need at least 1 peer to be considered caught up.
 	if len(pool.peers) == 0 {
-		pool.Logger.Debug("Blockpool has no peers")
 		return false
 	}
 
-	// Some conditions to determine if we're caught up.
-	// Ensures we've either received a block or waited some amount of time,
-	// and that we're synced to the highest known height.
-	// Note we use maxPeerHeight - 1 because to sync block H requires block H+1
+	// NOTE: we use maxPeerHeight - 1 because to sync block H requires block H+1
 	// to verify the LastCommit.
-	receivedBlockOrTimedOut := pool.height > 0 || time.Since(pool.startTime) > 5*time.Second
-	ourChainIsLongestAmongPeers := pool.maxPeerHeight == 0 || pool.height >= (pool.maxPeerHeight-1)
-	isCaughtUp := receivedBlockOrTimedOut && ourChainIsLongestAmongPeers
-	return isCaughtUp
+	return pool.height >= (pool.maxPeerHeight - 1)
 }
 
 // PeekTwoBlocks returns blocks at pool.height and pool.height+1.
@@ -190,8 +192,8 @@ func (pool *BlockPool) IsCaughtUp() bool {
 // So we peek two blocks at a time.
 // The caller will verify the commit.
 func (pool *BlockPool) PeekTwoBlocks() (first *types.Block, second *types.Block) {
-	pool.mtx.Lock()
-	defer pool.mtx.Unlock()
+	pool.mtx.RLock()
+	defer pool.mtx.RUnlock()
 
 	if r := pool.requesters[pool.height]; r != nil {
 		first = r.getBlock()
@@ -209,16 +211,12 @@ func (pool *BlockPool) PopRequest() {
 	defer pool.mtx.Unlock()
 
 	if r := pool.requesters[pool.height]; r != nil {
-		/*  The block can disappear at any time, due to removePeer().
-		if r := pool.requesters[pool.height]; r == nil || r.block == nil {
-			PanicSanity("PopRequest() requires a valid block")
-		}
-		*/
 		if err := r.Stop(); err != nil {
 			pool.Logger.Error("Error stopping requester", "err", err)
 		}
 		delete(pool.requesters, pool.height)
 		pool.height++
+		pool.lastAdvance = time.Now()
 	} else {
 		panic(fmt.Sprintf("Expected requester to pop, got nothing at height %v", pool.height))
 	}
@@ -227,13 +225,13 @@ func (pool *BlockPool) PopRequest() {
 // RedoRequest invalidates the block at pool.height,
 // Remove the peer and redo request from others.
 // Returns the ID of the removed peer.
-func (pool *BlockPool) RedoRequest(height int64) p2p.ID {
+func (pool *BlockPool) RedoRequest(height int64) p2p.NodeID {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
 	request := pool.requesters[height]
 	peerID := request.getPeerID()
-	if peerID != p2p.ID("") {
+	if peerID != p2p.NodeID("") {
 		// RemovePeer will redo all requesters associated with this peer.
 		pool.removePeer(peerID)
 	}
@@ -242,20 +240,14 @@ func (pool *BlockPool) RedoRequest(height int64) p2p.ID {
 
 // AddBlock validates that the block comes from the peer it was expected from and calls the requester to store it.
 // TODO: ensure that blocks come in order for each peer.
-func (pool *BlockPool) AddBlock(peerID p2p.ID, block *types.Block, blockSize int) {
+func (pool *BlockPool) AddBlock(peerID p2p.NodeID, block *types.Block, blockSize int) {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
 	requester := pool.requesters[block.Height]
 	if requester == nil {
-		pool.Logger.Info(
-			"peer sent us a block we didn't expect",
-			"peer",
-			peerID,
-			"curHeight",
-			pool.height,
-			"blockHeight",
-			block.Height)
+		pool.Logger.Error("peer sent us a block we didn't expect",
+			"peer", peerID, "curHeight", pool.height, "blockHeight", block.Height)
 		diff := pool.height - block.Height
 		if diff < 0 {
 			diff *= -1
@@ -273,20 +265,29 @@ func (pool *BlockPool) AddBlock(peerID p2p.ID, block *types.Block, blockSize int
 			peer.decrPending(blockSize)
 		}
 	} else {
-		pool.Logger.Info("invalid peer", "peer", peerID, "blockHeight", block.Height)
-		pool.sendError(errors.New("invalid peer"), peerID)
+		err := errors.New("requester is different or block already exists")
+		pool.Logger.Error(err.Error(), "peer", peerID, "requester", requester.getPeerID(), "blockHeight", block.Height)
+		pool.sendError(err, peerID)
 	}
 }
 
 // MaxPeerHeight returns the highest reported height.
 func (pool *BlockPool) MaxPeerHeight() int64 {
-	pool.mtx.Lock()
-	defer pool.mtx.Unlock()
+	pool.mtx.RLock()
+	defer pool.mtx.RUnlock()
 	return pool.maxPeerHeight
 }
 
+// LastAdvance returns the time when the last block was processed (or start
+// time if no blocks were processed).
+func (pool *BlockPool) LastAdvance() time.Time {
+	pool.mtx.RLock()
+	defer pool.mtx.RUnlock()
+	return pool.lastAdvance
+}
+
 // SetPeerRange sets the peer's alleged blockchain base and height.
-func (pool *BlockPool) SetPeerRange(peerID p2p.ID, base int64, height int64) {
+func (pool *BlockPool) SetPeerRange(peerID p2p.NodeID, base int64, height int64) {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
@@ -307,14 +308,14 @@ func (pool *BlockPool) SetPeerRange(peerID p2p.ID, base int64, height int64) {
 
 // RemovePeer removes the peer with peerID from the pool. If there's no peer
 // with peerID, function is a no-op.
-func (pool *BlockPool) RemovePeer(peerID p2p.ID) {
+func (pool *BlockPool) RemovePeer(peerID p2p.NodeID) {
 	pool.mtx.Lock()
 	defer pool.mtx.Unlock()
 
 	pool.removePeer(peerID)
 }
 
-func (pool *BlockPool) removePeer(peerID p2p.ID) {
+func (pool *BlockPool) removePeer(peerID p2p.NodeID) {
 	for _, requester := range pool.requesters {
 		if requester.getPeerID() == peerID {
 			requester.redo(peerID)
@@ -395,14 +396,14 @@ func (pool *BlockPool) requestersLen() int64 {
 	return int64(len(pool.requesters))
 }
 
-func (pool *BlockPool) sendRequest(height int64, peerID p2p.ID) {
+func (pool *BlockPool) sendRequest(height int64, peerID p2p.NodeID) {
 	if !pool.IsRunning() {
 		return
 	}
 	pool.requestsCh <- BlockRequest{height, peerID}
 }
 
-func (pool *BlockPool) sendError(err error, peerID p2p.ID) {
+func (pool *BlockPool) sendError(err error, peerID p2p.NodeID) {
 	if !pool.IsRunning() {
 		return
 	}
@@ -436,7 +437,7 @@ type bpPeer struct {
 	height      int64
 	base        int64
 	pool        *BlockPool
-	id          p2p.ID
+	id          p2p.NodeID
 	recvMonitor *flow.Monitor
 
 	timeout *time.Timer
@@ -444,7 +445,7 @@ type bpPeer struct {
 	logger log.Logger
 }
 
-func newBPPeer(pool *BlockPool, peerID p2p.ID, base int64, height int64) *bpPeer {
+func newBPPeer(pool *BlockPool, peerID p2p.NodeID, base int64, height int64) *bpPeer {
 	peer := &bpPeer{
 		pool:       pool,
 		id:         peerID,
@@ -509,10 +510,10 @@ type bpRequester struct {
 	pool       *BlockPool
 	height     int64
 	gotBlockCh chan struct{}
-	redoCh     chan p2p.ID // redo may send multitime, add peerId to identify repeat
+	redoCh     chan p2p.NodeID // redo may send multitime, add peerId to identify repeat
 
 	mtx    tmsync.Mutex
-	peerID p2p.ID
+	peerID p2p.NodeID
 	block  *types.Block
 }
 
@@ -521,7 +522,7 @@ func newBPRequester(pool *BlockPool, height int64) *bpRequester {
 		pool:       pool,
 		height:     height,
 		gotBlockCh: make(chan struct{}, 1),
-		redoCh:     make(chan p2p.ID, 1),
+		redoCh:     make(chan p2p.NodeID, 1),
 
 		peerID: "",
 		block:  nil,
@@ -536,7 +537,7 @@ func (bpr *bpRequester) OnStart() error {
 }
 
 // Returns true if the peer matches and block doesn't already exist.
-func (bpr *bpRequester) setBlock(block *types.Block, peerID p2p.ID) bool {
+func (bpr *bpRequester) setBlock(block *types.Block, peerID p2p.NodeID) bool {
 	bpr.mtx.Lock()
 	if bpr.block != nil || bpr.peerID != peerID {
 		bpr.mtx.Unlock()
@@ -558,7 +559,7 @@ func (bpr *bpRequester) getBlock() *types.Block {
 	return bpr.block
 }
 
-func (bpr *bpRequester) getPeerID() p2p.ID {
+func (bpr *bpRequester) getPeerID() p2p.NodeID {
 	bpr.mtx.Lock()
 	defer bpr.mtx.Unlock()
 	return bpr.peerID
@@ -580,7 +581,7 @@ func (bpr *bpRequester) reset() {
 // Tells bpRequester to pick another peer and try again.
 // NOTE: Nonblocking, and does nothing if another redo
 // was already requested.
-func (bpr *bpRequester) redo(peerID p2p.ID) {
+func (bpr *bpRequester) redo(peerID p2p.NodeID) {
 	select {
 	case bpr.redoCh <- peerID:
 	default:
@@ -601,7 +602,6 @@ OUTER_LOOP:
 			}
 			peer = bpr.pool.pickIncrAvailablePeer(bpr.height)
 			if peer == nil {
-				// log.Info("No peers available", "height", height)
 				time.Sleep(requestIntervalMS * time.Millisecond)
 				continue PICK_PEER_LOOP
 			}
@@ -638,10 +638,3 @@ OUTER_LOOP:
 		}
 	}
 }
-
-// BlockRequest stores a block request identified by the block Height and the PeerID responsible for
-// delivering the block
-type BlockRequest struct {
-	Height int64
-	PeerID p2p.ID
-}

blockchain/v0/pool_test.go

@@ -19,7 +19,7 @@ func init() {
 }
 
 type testPeer struct {
-	id        p2p.ID
+	id        p2p.NodeID
 	base      int64
 	height    int64
 	inputChan chan inputData // make sure each peer's data is sequential
@@ -49,7 +49,7 @@ func (p testPeer) simulateInput(input inputData) {
 	// input.t.Logf("Added block from peer %v (height: %v)", input.request.PeerID, input.request.Height)
 }
 
-type testPeers map[p2p.ID]testPeer
+type testPeers map[p2p.NodeID]testPeer
 
 func (ps testPeers) start() {
 	for _, v := range ps {
@@ -66,7 +66,7 @@ func (ps testPeers) stop() {
 func makePeers(numPeers int, minHeight, maxHeight int64) testPeers {
 	peers := make(testPeers, numPeers)
 	for i := 0; i < numPeers; i++ {
-		peerID := p2p.ID(tmrand.Str(12))
+		peerID := p2p.NodeID(tmrand.Str(12))
 		height := minHeight + tmrand.Int63n(maxHeight-minHeight)
 		base := minHeight + int64(i)
 		if base > height {
@@ -182,7 +182,7 @@ func TestBlockPoolTimeout(t *testing.T) {
 
 	// Pull from channels
 	counter := 0
-	timedOut := map[p2p.ID]struct{}{}
+	timedOut := map[p2p.NodeID]struct{}{}
 	for {
 		select {
 		case err := <-errorsCh:
@@ -203,7 +203,7 @@ func TestBlockPoolTimeout(t *testing.T) {
 func TestBlockPoolRemovePeer(t *testing.T) {
 	peers := make(testPeers, 10)
 	for i := 0; i < 10; i++ {
-		peerID := p2p.ID(fmt.Sprintf("%d", i+1))
+		peerID := p2p.NodeID(fmt.Sprintf("%d", i+1))
 		height := int64(i + 1)
 		peers[peerID] = testPeer{peerID, 0, height, make(chan inputData)}
 	}
@@ -227,10 +227,10 @@ func TestBlockPoolRemovePeer(t *testing.T) {
 	assert.EqualValues(t, 10, pool.MaxPeerHeight())
 
 	// remove not-existing peer
-	assert.NotPanics(t, func() { pool.RemovePeer(p2p.ID("Superman")) })
+	assert.NotPanics(t, func() { pool.RemovePeer(p2p.NodeID("Superman")) })
 
 	// remove peer with biggest height
-	pool.RemovePeer(p2p.ID("10"))
+	pool.RemovePeer(p2p.NodeID("10"))
 	assert.EqualValues(t, 9, pool.MaxPeerHeight())
 
 	// remove all peers

blockchain/v0/reactor.go

@@ -2,11 +2,12 @@ package v0
 
 import (
 	"fmt"
-	"reflect"
+	"sync"
 	"time"
 
 	bc "github.com/tendermint/tendermint/blockchain"
 	"github.com/tendermint/tendermint/libs/log"
+	"github.com/tendermint/tendermint/libs/service"
 	"github.com/tendermint/tendermint/p2p"
 	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
 	sm "github.com/tendermint/tendermint/state"
@@ -14,31 +15,55 @@ import (
 	"github.com/tendermint/tendermint/types"
 )
 
+var (
+	_ service.Service = (*Reactor)(nil)
+
+	// ChannelShims contains a map of ChannelDescriptorShim objects, where each
+	// object wraps a reference to a legacy p2p ChannelDescriptor and the corresponding
+	// p2p proto.Message the new p2p Channel is responsible for handling.
+	//
+	//
+	// TODO: Remove once p2p refactor is complete.
+	// ref: https://github.com/tendermint/tendermint/issues/5670
+	ChannelShims = map[p2p.ChannelID]*p2p.ChannelDescriptorShim{
+		BlockchainChannel: {
+			MsgType: new(bcproto.Message),
+			Descriptor: &p2p.ChannelDescriptor{
+				ID:                  byte(BlockchainChannel),
+				Priority:            5,
+				SendQueueCapacity:   1000,
+				RecvBufferCapacity:  50 * 4096,
+				RecvMessageCapacity: bc.MaxMsgSize,
+			},
+		},
+	}
+)
+
 const (
-	// BlockchainChannel is a channel for blocks and status updates (`BlockStore` height)
-	BlockchainChannel = byte(0x40)
+	// BlockchainChannel is a channel for blocks and status updates
+	BlockchainChannel = p2p.ChannelID(0x40)
 
 	trySyncIntervalMS = 10
 
-	// stop syncing when last block's time is
-	// within this much of the system time.
-	// stopSyncingDurationMinutes = 10
-
 	// ask for best height every 10s
 	statusUpdateIntervalSeconds = 10
+
 	// check if we should switch to consensus reactor
 	switchToConsensusIntervalSeconds = 1
+
+	// switch to consensus after this duration of inactivity
+	syncTimeout = 60 * time.Second
 )
 
 type consensusReactor interface {
-	// for when we switch from blockchain reactor and fast sync to
-	// the consensus machine
+	// For when we switch from blockchain reactor and fast sync to the consensus
+	// machine.
 	SwitchToConsensus(state sm.State, skipWAL bool)
 }
 
 type peerError struct {
 	err    error
-	peerID p2p.ID
+	peerID p2p.NodeID
 }
 
 func (e peerError) Error() string {
@@ -46,386 +71,510 @@ func (e peerError) Error() string {
 }
 
 // BlockchainReactor handles long-term catchup syncing.
-type BlockchainReactor struct {
-	p2p.BaseReactor
+type Reactor struct {
+	service.BaseService
 
 	// immutable
 	initialState sm.State
 
-	blockExec *sm.BlockExecutor
-	store     *store.BlockStore
-	pool      *BlockPool
-	fastSync  bool
+	blockExec   *sm.BlockExecutor
+	store       *store.BlockStore
+	pool        *BlockPool
+	consReactor consensusReactor
+	fastSync    bool
+
+	blockchainCh *p2p.Channel
+	peerUpdates  *p2p.PeerUpdatesCh
+	closeCh      chan struct{}
 
 	requestsCh <-chan BlockRequest
 	errorsCh   <-chan peerError
+
+	// poolWG is used to synchronize the graceful shutdown of the poolRoutine and
+	// requestRoutine spawned goroutines when stopping the reactor and before
+	// stopping the p2p Channel(s).
+	poolWG sync.WaitGroup
 }
 
-// NewBlockchainReactor returns new reactor instance.
-func NewBlockchainReactor(state sm.State, blockExec *sm.BlockExecutor, store *store.BlockStore,
-	fastSync bool) *BlockchainReactor {
-
+// NewReactor returns new reactor instance.
+func NewReactor(
+	logger log.Logger,
+	state sm.State,
+	blockExec *sm.BlockExecutor,
+	store *store.BlockStore,
+	consReactor consensusReactor,
+	blockchainCh *p2p.Channel,
+	peerUpdates *p2p.PeerUpdatesCh,
+	fastSync bool,
+) (*Reactor, error) {
 	if state.LastBlockHeight != store.Height() {
-		panic(fmt.Sprintf("state (%v) and store (%v) height mismatch", state.LastBlockHeight,
-			store.Height()))
+		return nil, fmt.Errorf("state (%v) and store (%v) height mismatch", state.LastBlockHeight, store.Height())
 	}
 
-	requestsCh := make(chan BlockRequest, maxTotalRequesters)
-
-	const capacity = 1000                      // must be bigger than peers count
-	errorsCh := make(chan peerError, capacity) // so we don't block in #Receive#pool.AddBlock
-
 	startHeight := store.Height() + 1
 	if startHeight == 1 {
 		startHeight = state.InitialHeight
 	}
-	pool := NewBlockPool(startHeight, requestsCh, errorsCh)
 
-	bcR := &BlockchainReactor{
+	requestsCh := make(chan BlockRequest, maxTotalRequesters)
+	errorsCh := make(chan peerError, maxPeerErrBuffer) // NOTE: The capacity should be larger than the peer count.
+
+	r := &Reactor{
 		initialState: state,
 		blockExec:    blockExec,
 		store:        store,
-		pool:         pool,
+		pool:         NewBlockPool(startHeight, requestsCh, errorsCh),
+		consReactor:  consReactor,
 		fastSync:     fastSync,
 		requestsCh:   requestsCh,
 		errorsCh:     errorsCh,
+		blockchainCh: blockchainCh,
+		peerUpdates:  peerUpdates,
+		closeCh:      make(chan struct{}),
 	}
-	bcR.BaseReactor = *p2p.NewBaseReactor("BlockchainReactor", bcR)
-	return bcR
+
+	r.BaseService = *service.NewBaseService(logger, "Blockchain", r)
+	return r, nil
 }
 
-// SetLogger implements service.Service by setting the logger on reactor and pool.
-func (bcR *BlockchainReactor) SetLogger(l log.Logger) {
-	bcR.BaseService.Logger = l
-	bcR.pool.Logger = l
-}
-
-// OnStart implements service.Service.
-func (bcR *BlockchainReactor) OnStart() error {
-	if bcR.fastSync {
-		err := bcR.pool.Start()
-		if err != nil {
+// OnStart starts separate go routines for each p2p Channel and listens for
+// envelopes on each. In addition, it also listens for peer updates and handles
+// messages on that p2p channel accordingly. The caller must be sure to execute
+// OnStop to ensure the outbound p2p Channels are closed.
+//
+// If fastSync is enabled, we also start the pool and the pool processing
+// goroutine. If the pool fails to start, an error is returned.
+func (r *Reactor) OnStart() error {
+	if r.fastSync {
+		if err := r.pool.Start(); err != nil {
 			return err
 		}
-		go bcR.poolRoutine(false)
+
+		r.poolWG.Add(1)
+		go r.poolRoutine(false)
 	}
+
+	go r.processBlockchainCh()
+	go r.processPeerUpdates()
+
 	return nil
 }
 
-// SwitchToFastSync is called by the state sync reactor when switching to fast sync.
-func (bcR *BlockchainReactor) SwitchToFastSync(state sm.State) error {
-	bcR.fastSync = true
-	bcR.initialState = state
+// OnStop stops the reactor by signaling to all spawned goroutines to exit and
+// blocking until they all exit.
+func (r *Reactor) OnStop() {
+	if r.fastSync {
+		if err := r.pool.Stop(); err != nil {
+			r.Logger.Error("failed to stop pool", "err", err)
+		}
+	}
 
-	bcR.pool.height = state.LastBlockHeight + 1
-	err := bcR.pool.Start()
-	if err != nil {
+	// wait for the poolRoutine and requestRoutine goroutines to gracefully exit
+	r.poolWG.Wait()
+
+	// Close closeCh to signal to all spawned goroutines to gracefully exit. All
+	// p2p Channels should execute Close().
+	close(r.closeCh)
+
+	// Wait for all p2p Channels to be closed before returning. This ensures we
+	// can easily reason about synchronization of all p2p Channels and ensure no
+	// panics will occur.
+	<-r.blockchainCh.Done()
+	<-r.peerUpdates.Done()
+}
+
+// respondToPeer loads a block and sends it to the requesting peer, if we have it.
+// Otherwise, we'll respond saying we do not have it.
+func (r *Reactor) respondToPeer(msg *bcproto.BlockRequest, peerID p2p.NodeID) {
+	block := r.store.LoadBlock(msg.Height)
+	if block != nil {
+		blockProto, err := block.ToProto()
+		if err != nil {
+			r.Logger.Error("failed to convert msg to protobuf", "err", err)
+			return
+		}
+
+		r.blockchainCh.Out() <- p2p.Envelope{
+			To:      peerID,
+			Message: &bcproto.BlockResponse{Block: blockProto},
+		}
+
+		return
+	}
+
+	r.Logger.Info("peer requesting a block we do not have", "peer", peerID, "height", msg.Height)
+	r.blockchainCh.Out() <- p2p.Envelope{
+		To:      peerID,
+		Message: &bcproto.NoBlockResponse{Height: msg.Height},
+	}
+}
+
+// handleBlockchainMessage handles envelopes sent from peers on the
+// BlockchainChannel. It returns an error only if the Envelope.Message is unknown
+// for this channel. This should never be called outside of handleMessage.
+func (r *Reactor) handleBlockchainMessage(envelope p2p.Envelope) error {
+	logger := r.Logger.With("peer", envelope.From)
+
+	switch msg := envelope.Message.(type) {
+	case *bcproto.BlockRequest:
+		r.respondToPeer(msg, envelope.From)
+
+	case *bcproto.BlockResponse:
+		block, err := types.BlockFromProto(msg.Block)
+		if err != nil {
+			logger.Error("failed to convert block from proto", "err", err)
+			return err
+		}
+
+		r.pool.AddBlock(envelope.From, block, block.Size())
+
+	case *bcproto.StatusRequest:
+		r.blockchainCh.Out() <- p2p.Envelope{
+			To: envelope.From,
+			Message: &bcproto.StatusResponse{
+				Height: r.store.Height(),
+				Base:   r.store.Base(),
+			},
+		}
+
+	case *bcproto.StatusResponse:
+		r.pool.SetPeerRange(envelope.From, msg.Base, msg.Height)
+
+	case *bcproto.NoBlockResponse:
+		logger.Debug("peer does not have the requested block", "height", msg.Height)
+
+	default:
+		return fmt.Errorf("received unknown message: %T", msg)
+	}
+
+	return nil
+}
+
+// handleMessage handles an Envelope sent from a peer on a specific p2p Channel.
+// It will handle errors and any possible panics gracefully. A caller can handle
+// any error returned by sending a PeerError on the respective channel.
+func (r *Reactor) handleMessage(chID p2p.ChannelID, envelope p2p.Envelope) (err error) {
+	defer func() {
+		if e := recover(); e != nil {
+			err = fmt.Errorf("panic in processing message: %v", e)
+			r.Logger.Error("recovering from processing message panic", "err", err)
+		}
+	}()
+
+	r.Logger.Debug("received message", "message", envelope.Message, "peer", envelope.From)
+
+	switch chID {
+	case BlockchainChannel:
+		err = r.handleBlockchainMessage(envelope)
+
+	default:
+		err = fmt.Errorf("unknown channel ID (%d) for envelope (%v)", chID, envelope)
+	}
+
+	return err
+}
+
+// processBlockchainCh initiates a blocking process where we listen for and handle
+// envelopes on the BlockchainChannel. Any error encountered during message
+// execution will result in a PeerError being sent on the BlockchainChannel. When
+// the reactor is stopped, we will catch the signal and close the p2p Channel
+// gracefully.
+func (r *Reactor) processBlockchainCh() {
+	defer r.blockchainCh.Close()
+
+	for {
+		select {
+		case envelope := <-r.blockchainCh.In():
+			if err := r.handleMessage(r.blockchainCh.ID(), envelope); err != nil {
+				r.Logger.Error("failed to process message", "ch_id", r.blockchainCh.ID(), "envelope", envelope, "err", err)
+				r.blockchainCh.Error() <- p2p.PeerError{
+					PeerID:   envelope.From,
+					Err:      err,
+					Severity: p2p.PeerErrorSeverityLow,
+				}
+			}
+
+		case <-r.closeCh:
+			r.Logger.Debug("stopped listening on blockchain channel; closing...")
+			return
+		}
+	}
+}
+
+// processPeerUpdate processes a PeerUpdate.
+func (r *Reactor) processPeerUpdate(peerUpdate p2p.PeerUpdate) {
+	r.Logger.Debug("received peer update", "peer", peerUpdate.PeerID, "status", peerUpdate.Status)
+
+	// XXX: Pool#RedoRequest can sometimes give us an empty peer.
+	if len(peerUpdate.PeerID) == 0 {
+		return
+	}
+
+	switch peerUpdate.Status {
+	case p2p.PeerStatusNew, p2p.PeerStatusUp:
+		// send a status update the newly added peer
+		r.blockchainCh.Out() <- p2p.Envelope{
+			To: peerUpdate.PeerID,
+			Message: &bcproto.StatusResponse{
+				Base:   r.store.Base(),
+				Height: r.store.Height(),
+			},
+		}
+
+	case p2p.PeerStatusDown, p2p.PeerStatusRemoved, p2p.PeerStatusBanned:
+		r.pool.RemovePeer(peerUpdate.PeerID)
+	}
+}
+
+// processPeerUpdates initiates a blocking process where we listen for and handle
+// PeerUpdate messages. When the reactor is stopped, we will catch the signal and
+// close the p2p PeerUpdatesCh gracefully.
+func (r *Reactor) processPeerUpdates() {
+	defer r.peerUpdates.Close()
+
+	for {
+		select {
+		case peerUpdate := <-r.peerUpdates.Updates():
+			r.processPeerUpdate(peerUpdate)
+
+		case <-r.closeCh:
+			r.Logger.Debug("stopped listening on peer updates channel; closing...")
+			return
+		}
+	}
+}
+
+// SwitchToFastSync is called by the state sync reactor when switching to fast
+// sync.
+func (r *Reactor) SwitchToFastSync(state sm.State) error {
+	r.fastSync = true
+	r.initialState = state
+	r.pool.height = state.LastBlockHeight + 1
+
+	if err := r.pool.Start(); err != nil {
 		return err
 	}
-	go bcR.poolRoutine(true)
+
+	r.poolWG.Add(1)
+	go r.poolRoutine(true)
+
 	return nil
 }
 
-// OnStop implements service.Service.
-func (bcR *BlockchainReactor) OnStop() {
-	if bcR.fastSync {
-		if err := bcR.pool.Stop(); err != nil {
-			bcR.Logger.Error("Error stopping pool", "err", err)
-		}
-	}
-}
-
-// GetChannels implements Reactor
-func (bcR *BlockchainReactor) GetChannels() []*p2p.ChannelDescriptor {
-	return []*p2p.ChannelDescriptor{
-		{
-			ID:                  BlockchainChannel,
-			Priority:            5,
-			SendQueueCapacity:   1000,
-			RecvBufferCapacity:  50 * 4096,
-			RecvMessageCapacity: bc.MaxMsgSize,
-		},
-	}
-}
-
-// AddPeer implements Reactor by sending our state to peer.
-func (bcR *BlockchainReactor) AddPeer(peer p2p.Peer) {
-	msgBytes, err := bc.EncodeMsg(&bcproto.StatusResponse{
-		Base:   bcR.store.Base(),
-		Height: bcR.store.Height()})
-	if err != nil {
-		bcR.Logger.Error("could not convert msg to protobuf", "err", err)
-		return
-	}
-
-	peer.Send(BlockchainChannel, msgBytes)
-	// it's OK if send fails. will try later in poolRoutine
-
-	// peer is added to the pool once we receive the first
-	// bcStatusResponseMessage from the peer and call pool.SetPeerRange
-}
-
-// RemovePeer implements Reactor by removing peer from the pool.
-func (bcR *BlockchainReactor) RemovePeer(peer p2p.Peer, reason interface{}) {
-	bcR.pool.RemovePeer(peer.ID())
-}
-
-// respondToPeer loads a block and sends it to the requesting peer,
-// if we have it. Otherwise, we'll respond saying we don't have it.
-func (bcR *BlockchainReactor) respondToPeer(msg *bcproto.BlockRequest,
-	src p2p.Peer) (queued bool) {
-
-	block := bcR.store.LoadBlock(msg.Height)
-	if block != nil {
-		bl, err := block.ToProto()
-		if err != nil {
-			bcR.Logger.Error("could not convert msg to protobuf", "err", err)
-			return false
-		}
-
-		msgBytes, err := bc.EncodeMsg(&bcproto.BlockResponse{Block: bl})
-		if err != nil {
-			bcR.Logger.Error("could not marshal msg", "err", err)
-			return false
-		}
-
-		return src.TrySend(BlockchainChannel, msgBytes)
-	}
-
-	bcR.Logger.Info("Peer asking for a block we don't have", "src", src, "height", msg.Height)
-
-	msgBytes, err := bc.EncodeMsg(&bcproto.NoBlockResponse{Height: msg.Height})
-	if err != nil {
-		bcR.Logger.Error("could not convert msg to protobuf", "err", err)
-		return false
-	}
-
-	return src.TrySend(BlockchainChannel, msgBytes)
-}
-
-// Receive implements Reactor by handling 4 types of messages (look below).
-func (bcR *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
-	msg, err := bc.DecodeMsg(msgBytes)
-	if err != nil {
-		bcR.Logger.Error("Error decoding message", "src", src, "chId", chID, "err", err)
-		bcR.Switch.StopPeerForError(src, err)
-		return
-	}
-
-	if err = bc.ValidateMsg(msg); err != nil {
-		bcR.Logger.Error("Peer sent us invalid msg", "peer", src, "msg", msg, "err", err)
-		bcR.Switch.StopPeerForError(src, err)
-		return
-	}
-
-	bcR.Logger.Debug("Receive", "src", src, "chID", chID, "msg", msg)
-
-	switch msg := msg.(type) {
-	case *bcproto.BlockRequest:
-		bcR.respondToPeer(msg, src)
-	case *bcproto.BlockResponse:
-		bi, err := types.BlockFromProto(msg.Block)
-		if err != nil {
-			bcR.Logger.Error("Block content is invalid", "err", err)
-			return
-		}
-		bcR.pool.AddBlock(src.ID(), bi, len(msgBytes))
-	case *bcproto.StatusRequest:
-		// Send peer our state.
-		msgBytes, err := bc.EncodeMsg(&bcproto.StatusResponse{
-			Height: bcR.store.Height(),
-			Base:   bcR.store.Base(),
-		})
-		if err != nil {
-			bcR.Logger.Error("could not convert msg to protobut", "err", err)
-			return
-		}
-		src.TrySend(BlockchainChannel, msgBytes)
-	case *bcproto.StatusResponse:
-		// Got a peer status. Unverified.
-		bcR.pool.SetPeerRange(src.ID(), msg.Base, msg.Height)
-	case *bcproto.NoBlockResponse:
-		bcR.Logger.Debug("Peer does not have requested block", "peer", src, "height", msg.Height)
-	default:
-		bcR.Logger.Error(fmt.Sprintf("Unknown message type %v", reflect.TypeOf(msg)))
-	}
-}
-
-// Handle messages from the poolReactor telling the reactor what to do.
-// NOTE: Don't sleep in the FOR_LOOP or otherwise slow it down!
-func (bcR *BlockchainReactor) poolRoutine(stateSynced bool) {
-
-	trySyncTicker := time.NewTicker(trySyncIntervalMS * time.Millisecond)
-	defer trySyncTicker.Stop()
-
+func (r *Reactor) requestRoutine() {
 	statusUpdateTicker := time.NewTicker(statusUpdateIntervalSeconds * time.Second)
 	defer statusUpdateTicker.Stop()
 
-	switchToConsensusTicker := time.NewTicker(switchToConsensusIntervalSeconds * time.Second)
+	r.poolWG.Add(1)
+	defer r.poolWG.Done()
+
+	for {
+		select {
+		case <-r.closeCh:
+			return
+
+		case <-r.pool.Quit():
+			return
+
+		case request := <-r.requestsCh:
+			r.blockchainCh.Out() <- p2p.Envelope{
+				To:      request.PeerID,
+				Message: &bcproto.BlockRequest{Height: request.Height},
+			}
+
+		case pErr := <-r.errorsCh:
+			r.blockchainCh.Error() <- p2p.PeerError{
+				PeerID:   pErr.peerID,
+				Err:      pErr.err,
+				Severity: p2p.PeerErrorSeverityLow,
+			}
+
+		case <-statusUpdateTicker.C:
+			r.poolWG.Add(1)
+
+			go func() {
+				defer r.poolWG.Done()
+
+				r.blockchainCh.Out() <- p2p.Envelope{
+					Broadcast: true,
+					Message:   &bcproto.StatusRequest{},
+				}
+			}()
+		}
+	}
+}
+
+// poolRoutine handles messages from the poolReactor telling the reactor what to
+// do.
+//
+// NOTE: Don't sleep in the FOR_LOOP or otherwise slow it down!
+func (r *Reactor) poolRoutine(stateSynced bool) {
+	var (
+		trySyncTicker           = time.NewTicker(trySyncIntervalMS * time.Millisecond)
+		switchToConsensusTicker = time.NewTicker(switchToConsensusIntervalSeconds * time.Second)
+
+		blocksSynced = uint64(0)
+
+		chainID = r.initialState.ChainID
+		state   = r.initialState
+
+		lastHundred = time.Now()
+		lastRate    = 0.0
+
+		didProcessCh = make(chan struct{}, 1)
+	)
+
+	defer trySyncTicker.Stop()
 	defer switchToConsensusTicker.Stop()
 
-	blocksSynced := uint64(0)
+	go r.requestRoutine()
 
-	chainID := bcR.initialState.ChainID
-	state := bcR.initialState
-
-	lastHundred := time.Now()
-	lastRate := 0.0
-
-	didProcessCh := make(chan struct{}, 1)
-
-	go func() {
-		for {
-			select {
-			case <-bcR.Quit():
-				return
-			case <-bcR.pool.Quit():
-				return
-			case request := <-bcR.requestsCh:
-				peer := bcR.Switch.Peers().Get(request.PeerID)
-				if peer == nil {
-					continue
-				}
-				msgBytes, err := bc.EncodeMsg(&bcproto.BlockRequest{Height: request.Height})
-				if err != nil {
-					bcR.Logger.Error("could not convert msg to proto", "err", err)
-					continue
-				}
-
-				queued := peer.TrySend(BlockchainChannel, msgBytes)
-				if !queued {
-					bcR.Logger.Debug("Send queue is full, drop block request", "peer", peer.ID(), "height", request.Height)
-				}
-			case err := <-bcR.errorsCh:
-				peer := bcR.Switch.Peers().Get(err.peerID)
-				if peer != nil {
-					bcR.Switch.StopPeerForError(peer, err)
-				}
-
-			case <-statusUpdateTicker.C:
-				// ask for status updates
-				go bcR.BroadcastStatusRequest() // nolint: errcheck
-
-			}
-		}
-	}()
+	defer r.poolWG.Done()
 
 FOR_LOOP:
 	for {
 		select {
 		case <-switchToConsensusTicker.C:
-			height, numPending, lenRequesters := bcR.pool.GetStatus()
-			outbound, inbound, _ := bcR.Switch.NumPeers()
-			bcR.Logger.Debug("Consensus ticker", "numPending", numPending, "total", lenRequesters,
-				"outbound", outbound, "inbound", inbound)
-			if bcR.pool.IsCaughtUp() {
-				bcR.Logger.Info("Time to switch to consensus reactor!", "height", height)
-				if err := bcR.pool.Stop(); err != nil {
-					bcR.Logger.Error("Error stopping pool", "err", err)
-				}
-				conR, ok := bcR.Switch.Reactor("CONSENSUS").(consensusReactor)
-				if ok {
-					conR.SwitchToConsensus(state, blocksSynced > 0 || stateSynced)
-				}
-				// else {
-				// should only happen during testing
-				// }
+			var (
+				height, numPending, lenRequesters = r.pool.GetStatus()
+				lastAdvance                       = r.pool.LastAdvance()
+			)
 
-				break FOR_LOOP
+			r.Logger.Debug(
+				"consensus ticker",
+				"num_pending", numPending,
+				"total", lenRequesters,
+				"height", height,
+			)
+
+			switch {
+			case r.pool.IsCaughtUp():
+				r.Logger.Info("switching to consensus reactor", "height", height)
+
+			case time.Since(lastAdvance) > syncTimeout:
+				r.Logger.Error("no progress since last advance", "last_advance", lastAdvance)
+
+			default:
+				r.Logger.Info(
+					"not caught up yet",
+					"height", height,
+					"max_peer_height", r.pool.MaxPeerHeight(),
+					"timeout_in", syncTimeout-time.Since(lastAdvance),
+				)
+				continue
 			}
 
-		case <-trySyncTicker.C: // chan time
+			if err := r.pool.Stop(); err != nil {
+				r.Logger.Error("failed to stop pool", "err", err)
+			}
+
+			if r.consReactor != nil {
+				r.consReactor.SwitchToConsensus(state, blocksSynced > 0 || stateSynced)
+			}
+
+			break FOR_LOOP
+
+		case <-trySyncTicker.C:
 			select {
 			case didProcessCh <- struct{}{}:
 			default:
 			}
 
 		case <-didProcessCh:
-			// NOTE: It is a subtle mistake to process more than a single block
-			// at a time (e.g. 10) here, because we only TrySend 1 request per
-			// loop.  The ratio mismatch can result in starving of blocks, a
-			// sudden burst of requests and responses, and repeat.
-			// Consequently, it is better to split these routines rather than
-			// coupling them as it's written here.  TODO uncouple from request
-			// routine.
+			// NOTE: It is a subtle mistake to process more than a single block at a
+			// time (e.g. 10) here, because we only send one BlockRequest per loop
+			// iteration. The ratio mismatch can result in starving of blocks, i.e. a
+			// sudden burst of requests and responses, and repeat. Consequently, it is
+			// better to split these routines rather than coupling them as it is
+			// written here.
+			//
+			// TODO: Uncouple from request routine.
 
-			// See if there are any blocks to sync.
-			first, second := bcR.pool.PeekTwoBlocks()
-			// bcR.Logger.Info("TrySync peeked", "first", first, "second", second)
+			// see if there are any blocks to sync
+			first, second := r.pool.PeekTwoBlocks()
 			if first == nil || second == nil {
-				// We need both to sync the first block.
+				// we need both to sync the first block
 				continue FOR_LOOP
 			} else {
-				// Try again quickly next loop.
+				// try again quickly next loop
 				didProcessCh <- struct{}{}
 			}
 
-			firstParts := first.MakePartSet(types.BlockPartSizeBytes)
-			firstPartSetHeader := firstParts.Header()
-			firstID := types.BlockID{Hash: first.Hash(), PartSetHeader: firstPartSetHeader}
-			// Finally, verify the first block using the second's commit
-			// NOTE: we can probably make this more efficient, but note that calling
+			var (
+				firstParts         = first.MakePartSet(types.BlockPartSizeBytes)
+				firstPartSetHeader = firstParts.Header()
+				firstID            = types.BlockID{Hash: first.Hash(), PartSetHeader: firstPartSetHeader}
+			)
+
+			// Finally, verify the first block using the second's commit.
+			//
+			// NOTE: We can probably make this more efficient, but note that calling
 			// first.Hash() doesn't verify the tx contents, so MakePartSet() is
 			// currently necessary.
-			err := state.Validators.VerifyCommitLight(
-				chainID, firstID, first.Height, second.LastCommit)
+			err := state.Validators.VerifyCommitLight(chainID, firstID, first.Height, second.LastCommit)
 			if err != nil {
-				bcR.Logger.Error("Error in validation", "err", err)
-				peerID := bcR.pool.RedoRequest(first.Height)
-				peer := bcR.Switch.Peers().Get(peerID)
-				if peer != nil {
-					// NOTE: we've already removed the peer's request, but we
-					// still need to clean up the rest.
-					bcR.Switch.StopPeerForError(peer, fmt.Errorf("blockchainReactor validation error: %v", err))
+				err = fmt.Errorf("invalid last commit: %w", err)
+				r.Logger.Error(
+					err.Error(),
+					"last_commit", second.LastCommit,
+					"block_id", firstID,
+					"height", first.Height,
+				)
+
+				// NOTE: We've already removed the peer's request, but we still need
+				// to clean up the rest.
+				peerID := r.pool.RedoRequest(first.Height)
+				r.blockchainCh.Error() <- p2p.PeerError{
+					PeerID:   peerID,
+					Err:      err,
+					Severity: p2p.PeerErrorSeverityLow,
 				}
-				peerID2 := bcR.pool.RedoRequest(second.Height)
-				peer2 := bcR.Switch.Peers().Get(peerID2)
-				if peer2 != nil && peer2 != peer {
-					// NOTE: we've already removed the peer's request, but we
-					// still need to clean up the rest.
-					bcR.Switch.StopPeerForError(peer2, fmt.Errorf("blockchainReactor validation error: %v", err))
+
+				peerID2 := r.pool.RedoRequest(second.Height)
+				if peerID2 != peerID {
+					r.blockchainCh.Error() <- p2p.PeerError{
+						PeerID:   peerID2,
+						Err:      err,
+						Severity: p2p.PeerErrorSeverityLow,
+					}
 				}
+
 				continue FOR_LOOP
 			} else {
-				bcR.pool.PopRequest()
+				r.pool.PopRequest()
 
-				// TODO: batch saves so we dont persist to disk every block
-				bcR.store.SaveBlock(first, firstParts, second.LastCommit)
+				// TODO: batch saves so we do not persist to disk every block
+				r.store.SaveBlock(first, firstParts, second.LastCommit)
 
-				// TODO: same thing for app - but we would need a way to
-				// get the hash without persisting the state
 				var err error
-				state, _, err = bcR.blockExec.ApplyBlock(state, firstID, first)
+
+				// TODO: Same thing for app - but we would need a way to get the hash
+				// without persisting the state.
+				state, _, err = r.blockExec.ApplyBlock(state, firstID, first)
 				if err != nil {
-					// TODO This is bad, are we zombie?
-					panic(fmt.Sprintf("Failed to process committed block (%d:%X): %v", first.Height, first.Hash(), err))
+					// TODO: This is bad, are we zombie?
+					panic(fmt.Sprintf("failed to process committed block (%d:%X): %v", first.Height, first.Hash(), err))
 				}
+
 				blocksSynced++
 
 				if blocksSynced%100 == 0 {
 					lastRate = 0.9*lastRate + 0.1*(100/time.Since(lastHundred).Seconds())
-					bcR.Logger.Info("Fast Sync Rate", "height", bcR.pool.height,
-						"max_peer_height", bcR.pool.MaxPeerHeight(), "blocks/s", lastRate)
+					r.Logger.Info(
+						"fast sync rate",
+						"height", r.pool.height,
+						"max_peer_height", r.pool.MaxPeerHeight(),
+						"blocks/s", lastRate,
+					)
+
 					lastHundred = time.Now()
 				}
 			}
+
 			continue FOR_LOOP
 
-		case <-bcR.Quit():
+		case <-r.closeCh:
 			break FOR_LOOP
 		}
 	}
 }
-
-// BroadcastStatusRequest broadcasts `BlockStore` base and height.
-func (bcR *BlockchainReactor) BroadcastStatusRequest() error {
-	bm, err := bc.EncodeMsg(&bcproto.StatusRequest{})
-	if err != nil {
-		bcR.Logger.Error("could not convert msg to proto", "err", err)
-		return fmt.Errorf("could not convert msg to proto: %w", err)
-	}
-
-	bcR.Switch.Broadcast(BlockchainChannel, bm)
-
-	return nil
-}

blockchain/v0/reactor_test.go

@@ -2,71 +2,59 @@ package v0
 
 import (
 	"fmt"
+	"math/rand"
 	"os"
-	"sort"
 	"testing"
 	"time"
 
-	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 
-	dbm "github.com/tendermint/tm-db"
-
 	abci "github.com/tendermint/tendermint/abci/types"
 	cfg "github.com/tendermint/tendermint/config"
 	"github.com/tendermint/tendermint/libs/log"
 	"github.com/tendermint/tendermint/mempool/mock"
 	"github.com/tendermint/tendermint/p2p"
+	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
 	"github.com/tendermint/tendermint/proxy"
 	sm "github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/store"
 	"github.com/tendermint/tendermint/types"
-	tmtime "github.com/tendermint/tendermint/types/time"
+	dbm "github.com/tendermint/tm-db"
 )
 
-var config *cfg.Config
+var rng = rand.New(rand.NewSource(time.Now().UnixNano()))
 
-func randGenesisDoc(numValidators int, randPower bool, minPower int64) (*types.GenesisDoc, []types.PrivValidator) {
-	validators := make([]types.GenesisValidator, numValidators)
-	privValidators := make([]types.PrivValidator, numValidators)
-	for i := 0; i < numValidators; i++ {
-		val, privVal := types.RandValidator(randPower, minPower)
-		validators[i] = types.GenesisValidator{
-			PubKey: val.PubKey,
-			Power:  val.VotingPower,
-		}
-		privValidators[i] = privVal
-	}
-	sort.Sort(types.PrivValidatorsByAddress(privValidators))
-
-	return &types.GenesisDoc{
-		GenesisTime: tmtime.Now(),
-		ChainID:     config.ChainID(),
-		Validators:  validators,
-	}, privValidators
-}
-
-type BlockchainReactorPair struct {
-	reactor *BlockchainReactor
+type reactorTestSuite struct {
+	reactor *Reactor
 	app     proxy.AppConns
+
+	peerID p2p.NodeID
+
+	blockchainChannel   *p2p.Channel
+	blockchainInCh      chan p2p.Envelope
+	blockchainOutCh     chan p2p.Envelope
+	blockchainPeerErrCh chan p2p.PeerError
+
+	peerUpdatesCh chan p2p.PeerUpdate
+	peerUpdates   *p2p.PeerUpdatesCh
 }
 
-func newBlockchainReactor(
-	logger log.Logger,
+func setup(
+	t *testing.T,
 	genDoc *types.GenesisDoc,
 	privVals []types.PrivValidator,
-	maxBlockHeight int64) BlockchainReactorPair {
-	if len(privVals) != 1 {
-		panic("only support one validator")
-	}
+	maxBlockHeight int64,
+	chBuf uint,
+) *reactorTestSuite {
+	t.Helper()
 
-	app := &testApp{}
+	require.Len(t, privVals, 1, "only one validator can be supported")
+
+	app := &abci.BaseApplication{}
 	cc := proxy.NewLocalClientCreator(app)
+
 	proxyApp := proxy.NewAppConns(cc)
-	err := proxyApp.Start()
-	if err != nil {
-		panic(fmt.Errorf("error start app: %w", err))
-	}
+	require.NoError(t, proxyApp.Start())
 
 	blockDB := dbm.NewMemDB()
 	stateDB := dbm.NewMemDB()
@@ -74,25 +62,24 @@ func newBlockchainReactor(
 	blockStore := store.NewBlockStore(blockDB)
 
 	state, err := stateStore.LoadFromDBOrGenesisDoc(genDoc)
-	if err != nil {
-		panic(fmt.Errorf("error constructing state from genesis file: %w", err))
-	}
+	require.NoError(t, err)
 
-	// Make the BlockchainReactor itself.
-	// NOTE we have to create and commit the blocks first because
-	// pool.height is determined from the store.
 	fastSync := true
 	db := dbm.NewMemDB()
 	stateStore = sm.NewStore(db)
-	blockExec := sm.NewBlockExecutor(stateStore, log.TestingLogger(), proxyApp.Consensus(),
-		mock.Mempool{}, sm.EmptyEvidencePool{})
-	if err = stateStore.Save(state); err != nil {
-		panic(err)
-	}
 
-	// let's add some blocks in
+	blockExec := sm.NewBlockExecutor(
+		stateStore,
+		log.TestingLogger(),
+		proxyApp.Consensus(),
+		mock.Mempool{},
+		sm.EmptyEvidencePool{},
+	)
+	require.NoError(t, stateStore.Save(state))
+
 	for blockHeight := int64(1); blockHeight <= maxBlockHeight; blockHeight++ {
 		lastCommit := types.NewCommit(blockHeight-1, 0, types.BlockID{}, nil)
+
 		if blockHeight > 1 {
 			lastBlockMeta := blockStore.LoadBlockMeta(blockHeight - 1)
 			lastBlock := blockStore.LoadBlock(blockHeight - 1)
@@ -105,60 +92,197 @@ func newBlockchainReactor(
 				lastBlock.Header.ChainID,
 				time.Now(),
 			)
-			if err != nil {
-				panic(err)
-			}
-			lastCommit = types.NewCommit(vote.Height, vote.Round,
-				lastBlockMeta.BlockID, []types.CommitSig{vote.CommitSig()})
+			require.NoError(t, err)
+
+			lastCommit = types.NewCommit(
+				vote.Height,
+				vote.Round,
+				lastBlockMeta.BlockID,
+				[]types.CommitSig{vote.CommitSig()},
+			)
 		}
 
 		thisBlock := makeBlock(blockHeight, state, lastCommit)
-
 		thisParts := thisBlock.MakePartSet(types.BlockPartSizeBytes)
 		blockID := types.BlockID{Hash: thisBlock.Hash(), PartSetHeader: thisParts.Header()}
 
 		state, _, err = blockExec.ApplyBlock(state, blockID, thisBlock)
-		if err != nil {
-			panic(fmt.Errorf("error apply block: %w", err))
-		}
+		require.NoError(t, err)
 
 		blockStore.SaveBlock(thisBlock, thisParts, lastCommit)
 	}
 
-	bcReactor := NewBlockchainReactor(state.Copy(), blockExec, blockStore, fastSync)
-	bcReactor.SetLogger(logger.With("module", "blockchain"))
+	pID := make([]byte, 16)
+	_, err = rng.Read(pID)
+	require.NoError(t, err)
 
-	return BlockchainReactorPair{bcReactor, proxyApp}
+	peerUpdatesCh := make(chan p2p.PeerUpdate, chBuf)
+
+	rts := &reactorTestSuite{
+		app:                 proxyApp,
+		blockchainInCh:      make(chan p2p.Envelope, chBuf),
+		blockchainOutCh:     make(chan p2p.Envelope, chBuf),
+		blockchainPeerErrCh: make(chan p2p.PeerError, chBuf),
+		peerUpdatesCh:       peerUpdatesCh,
+		peerUpdates:         p2p.NewPeerUpdates(peerUpdatesCh),
+		peerID:              p2p.NodeID(fmt.Sprintf("%x", pID)),
+	}
+
+	rts.blockchainChannel = p2p.NewChannel(
+		BlockchainChannel,
+		new(bcproto.Message),
+		rts.blockchainInCh,
+		rts.blockchainOutCh,
+		rts.blockchainPeerErrCh,
+	)
+
+	reactor, err := NewReactor(
+		log.TestingLogger().With("module", "blockchain", "node", rts.peerID),
+		state.Copy(),
+		blockExec,
+		blockStore,
+		nil,
+		rts.blockchainChannel,
+		rts.peerUpdates,
+		fastSync,
+	)
+
+	require.NoError(t, err)
+	rts.reactor = reactor
+
+	require.NoError(t, rts.reactor.Start())
+	require.True(t, rts.reactor.IsRunning())
+
+	t.Cleanup(func() {
+		require.NoError(t, rts.reactor.Stop())
+		require.NoError(t, rts.app.Stop())
+		require.False(t, rts.reactor.IsRunning())
+	})
+
+	return rts
 }
 
-func TestNoBlockResponse(t *testing.T) {
-	config = cfg.ResetTestRoot("blockchain_reactor_test")
-	defer os.RemoveAll(config.RootDir)
-	genDoc, privVals := randGenesisDoc(1, false, 30)
+func simulateRouter(primary *reactorTestSuite, suites []*reactorTestSuite, dropChErr bool) {
+	// create a mapping for efficient suite lookup by peer ID
+	suitesByPeerID := make(map[p2p.NodeID]*reactorTestSuite)
+	for _, suite := range suites {
+		suitesByPeerID[suite.peerID] = suite
+	}
 
-	maxBlockHeight := int64(65)
-
-	reactorPairs := make([]BlockchainReactorPair, 2)
-
-	reactorPairs[0] = newBlockchainReactor(log.TestingLogger(), genDoc, privVals, maxBlockHeight)
-	reactorPairs[1] = newBlockchainReactor(log.TestingLogger(), genDoc, privVals, 0)
-
-	p2p.MakeConnectedSwitches(config.P2P, 2, func(i int, s *p2p.Switch) *p2p.Switch {
-		s.AddReactor("BLOCKCHAIN", reactorPairs[i].reactor)
-		return s
-
-	}, p2p.Connect2Switches)
-
-	defer func() {
-		for _, r := range reactorPairs {
-			err := r.reactor.Stop()
-			require.NoError(t, err)
-			err = r.app.Stop()
-			require.NoError(t, err)
+	// Simulate a router by listening for all outbound envelopes and proxying the
+	// envelope to the respective peer (suite).
+	go func() {
+		for envelope := range primary.blockchainOutCh {
+			if envelope.Broadcast {
+				for _, s := range suites {
+					// broadcast to everyone except source
+					if s.peerID != primary.peerID {
+						s.blockchainInCh <- p2p.Envelope{
+							From:    primary.peerID,
+							To:      s.peerID,
+							Message: envelope.Message,
+						}
+					}
+				}
+			} else {
+				suitesByPeerID[envelope.To].blockchainInCh <- p2p.Envelope{
+					From:    primary.peerID,
+					To:      envelope.To,
+					Message: envelope.Message,
+				}
+			}
 		}
 	}()
 
-	tests := []struct {
+	go func() {
+		for pErr := range primary.blockchainPeerErrCh {
+			if dropChErr {
+				primary.reactor.Logger.Debug("dropped peer error", "err", pErr.Err)
+			} else {
+				primary.peerUpdatesCh <- p2p.PeerUpdate{
+					PeerID: pErr.PeerID,
+					Status: p2p.PeerStatusRemoved,
+				}
+			}
+		}
+	}()
+}
+
+func TestReactor_AbruptDisconnect(t *testing.T) {
+	config := cfg.ResetTestRoot("blockchain_reactor_test")
+	defer os.RemoveAll(config.RootDir)
+
+	genDoc, privVals := randGenesisDoc(config, 1, false, 30)
+	maxBlockHeight := int64(64)
+	testSuites := []*reactorTestSuite{
+		setup(t, genDoc, privVals, maxBlockHeight, 0),
+		setup(t, genDoc, privVals, 0, 0),
+	}
+
+	require.Equal(t, maxBlockHeight, testSuites[0].reactor.store.Height())
+
+	for _, s := range testSuites {
+		simulateRouter(s, testSuites, true)
+
+		// connect reactor to every other reactor
+		for _, ss := range testSuites {
+			if s.peerID != ss.peerID {
+				s.peerUpdatesCh <- p2p.PeerUpdate{
+					Status: p2p.PeerStatusUp,
+					PeerID: ss.peerID,
+				}
+			}
+		}
+	}
+
+	secondaryPool := testSuites[1].reactor.pool
+	require.Eventually(
+		t,
+		func() bool {
+			height, _, _ := secondaryPool.GetStatus()
+			return secondaryPool.MaxPeerHeight() > 0 && height > 0 && height < 10
+		},
+		10*time.Second,
+		10*time.Millisecond,
+		"expected node to be partially synced",
+	)
+
+	// Remove synced node from the syncing node which should not result in any
+	// deadlocks or race conditions within the context of poolRoutine.
+	testSuites[1].peerUpdatesCh <- p2p.PeerUpdate{
+		Status: p2p.PeerStatusDown,
+		PeerID: testSuites[0].peerID,
+	}
+}
+
+func TestReactor_NoBlockResponse(t *testing.T) {
+	config := cfg.ResetTestRoot("blockchain_reactor_test")
+	defer os.RemoveAll(config.RootDir)
+
+	genDoc, privVals := randGenesisDoc(config, 1, false, 30)
+	maxBlockHeight := int64(65)
+	testSuites := []*reactorTestSuite{
+		setup(t, genDoc, privVals, maxBlockHeight, 0),
+		setup(t, genDoc, privVals, 0, 0),
+	}
+
+	require.Equal(t, maxBlockHeight, testSuites[0].reactor.store.Height())
+
+	for _, s := range testSuites {
+		simulateRouter(s, testSuites, true)
+
+		// connect reactor to every other reactor
+		for _, ss := range testSuites {
+			if s.peerID != ss.peerID {
+				s.peerUpdatesCh <- p2p.PeerUpdate{
+					Status: p2p.PeerStatusUp,
+					PeerID: ss.peerID,
+				}
+			}
+		}
+	}
+
+	testCases := []struct {
 		height   int64
 		existent bool
 	}{
@@ -168,161 +292,114 @@ func TestNoBlockResponse(t *testing.T) {
 		{100, false},
 	}
 
-	for {
-		if reactorPairs[1].reactor.pool.IsCaughtUp() {
-			break
-		}
+	secondaryPool := testSuites[1].reactor.pool
+	require.Eventually(
+		t,
+		func() bool { return secondaryPool.MaxPeerHeight() > 0 && secondaryPool.IsCaughtUp() },
+		10*time.Second,
+		10*time.Millisecond,
+		"expected node to be fully synced",
+	)
 
-		time.Sleep(10 * time.Millisecond)
-	}
-
-	assert.Equal(t, maxBlockHeight, reactorPairs[0].reactor.store.Height())
-
-	for _, tt := range tests {
-		block := reactorPairs[1].reactor.store.LoadBlock(tt.height)
-		if tt.existent {
-			assert.True(t, block != nil)
+	for _, tc := range testCases {
+		block := testSuites[1].reactor.store.LoadBlock(tc.height)
+		if tc.existent {
+			require.True(t, block != nil)
 		} else {
-			assert.True(t, block == nil)
+			require.Nil(t, block)
 		}
 	}
 }
 
-// NOTE: This is too hard to test without
-// an easy way to add test peer to switch
-// or without significant refactoring of the module.
-// Alternatively we could actually dial a TCP conn but
-// that seems extreme.
-func TestBadBlockStopsPeer(t *testing.T) {
-	config = cfg.ResetTestRoot("blockchain_reactor_test")
+func TestReactor_BadBlockStopsPeer(t *testing.T) {
+	config := cfg.ResetTestRoot("blockchain_reactor_test")
 	defer os.RemoveAll(config.RootDir)
-	genDoc, privVals := randGenesisDoc(1, false, 30)
 
-	maxBlockHeight := int64(148)
+	maxBlockHeight := int64(48)
+	genDoc, privVals := randGenesisDoc(config, 1, false, 30)
 
-	// Other chain needs a different validator set
-	otherGenDoc, otherPrivVals := randGenesisDoc(1, false, 30)
-	otherChain := newBlockchainReactor(log.TestingLogger(), otherGenDoc, otherPrivVals, maxBlockHeight)
+	testSuites := []*reactorTestSuite{
+		setup(t, genDoc, privVals, maxBlockHeight, 1000), // fully synced node
+		setup(t, genDoc, privVals, 0, 1000),
+		setup(t, genDoc, privVals, 0, 1000),
+		setup(t, genDoc, privVals, 0, 1000),
+		setup(t, genDoc, privVals, 0, 1000), // new node
+	}
 
-	defer func() {
-		err := otherChain.reactor.Stop()
-		require.Error(t, err)
-		err = otherChain.app.Stop()
-		require.NoError(t, err)
-	}()
+	require.Equal(t, maxBlockHeight, testSuites[0].reactor.store.Height())
 
-	reactorPairs := make([]BlockchainReactorPair, 4)
+	for _, s := range testSuites[:len(testSuites)-1] {
+		simulateRouter(s, testSuites, true)
 
-	reactorPairs[0] = newBlockchainReactor(log.TestingLogger(), genDoc, privVals, maxBlockHeight)
-	reactorPairs[1] = newBlockchainReactor(log.TestingLogger(), genDoc, privVals, 0)
-	reactorPairs[2] = newBlockchainReactor(log.TestingLogger(), genDoc, privVals, 0)
-	reactorPairs[3] = newBlockchainReactor(log.TestingLogger(), genDoc, privVals, 0)
-
-	switches := p2p.MakeConnectedSwitches(config.P2P, 4, func(i int, s *p2p.Switch) *p2p.Switch {
-		s.AddReactor("BLOCKCHAIN", reactorPairs[i].reactor)
-		return s
-
-	}, p2p.Connect2Switches)
-
-	defer func() {
-		for _, r := range reactorPairs {
-			err := r.reactor.Stop()
-			require.NoError(t, err)
-
-			err = r.app.Stop()
-			require.NoError(t, err)
-		}
-	}()
-
-	for {
-		time.Sleep(1 * time.Second)
-		caughtUp := true
-		for _, r := range reactorPairs {
-			if !r.reactor.pool.IsCaughtUp() {
-				caughtUp = false
+		// connect reactor to every other reactor except the new node
+		for _, ss := range testSuites[:len(testSuites)-1] {
+			if s.peerID != ss.peerID {
+				s.peerUpdatesCh <- p2p.PeerUpdate{
+					Status: p2p.PeerStatusUp,
+					PeerID: ss.peerID,
+				}
 			}
 		}
-		if caughtUp {
-			break
+	}
+
+	require.Eventually(
+		t,
+		func() bool {
+			caughtUp := true
+			for _, s := range testSuites[1 : len(testSuites)-1] {
+				if s.reactor.pool.MaxPeerHeight() == 0 || !s.reactor.pool.IsCaughtUp() {
+					caughtUp = false
+				}
+			}
+
+			return caughtUp
+		},
+		10*time.Minute,
+		10*time.Millisecond,
+		"expected all nodes to be fully synced",
+	)
+
+	for _, s := range testSuites[:len(testSuites)-1] {
+		require.Len(t, s.reactor.pool.peers, 3)
+	}
+
+	// Mark testSuites[3] as an invalid peer which will cause newSuite to disconnect
+	// from this peer.
+	otherGenDoc, otherPrivVals := randGenesisDoc(config, 1, false, 30)
+	otherSuite := setup(t, otherGenDoc, otherPrivVals, maxBlockHeight, 0)
+	testSuites[3].reactor.store = otherSuite.reactor.store
+
+	// add a fake peer just so we do not wait for the consensus ticker to timeout
+	otherSuite.reactor.pool.SetPeerRange("00ff", 10, 10)
+
+	// start the new peer's faux router
+	newSuite := testSuites[len(testSuites)-1]
+	simulateRouter(newSuite, testSuites, false)
+
+	// connect all nodes to the new peer
+	for _, s := range testSuites[:len(testSuites)-1] {
+		newSuite.peerUpdatesCh <- p2p.PeerUpdate{
+			Status: p2p.PeerStatusUp,
+			PeerID: s.peerID,
 		}
 	}
 
-	// at this time, reactors[0-3] is the newest
-	assert.Equal(t, 3, reactorPairs[1].reactor.Switch.Peers().Size())
+	// wait for the new peer to catch up and become fully synced
+	require.Eventually(
+		t,
+		func() bool { return newSuite.reactor.pool.MaxPeerHeight() > 0 && newSuite.reactor.pool.IsCaughtUp() },
+		10*time.Minute,
+		10*time.Millisecond,
+		"expected new node to be fully synced",
+	)
 
-	// Mark reactorPairs[3] as an invalid peer. Fiddling with .store without a mutex is a data
-	// race, but can't be easily avoided.
-	reactorPairs[3].reactor.store = otherChain.reactor.store
-
-	lastReactorPair := newBlockchainReactor(log.TestingLogger(), genDoc, privVals, 0)
-	reactorPairs = append(reactorPairs, lastReactorPair)
-
-	switches = append(switches, p2p.MakeConnectedSwitches(config.P2P, 1, func(i int, s *p2p.Switch) *p2p.Switch {
-		s.AddReactor("BLOCKCHAIN", reactorPairs[len(reactorPairs)-1].reactor)
-		return s
-
-	}, p2p.Connect2Switches)...)
-
-	for i := 0; i < len(reactorPairs)-1; i++ {
-		p2p.Connect2Switches(switches, i, len(reactorPairs)-1)
-	}
-
-	for {
-		if lastReactorPair.reactor.pool.IsCaughtUp() || lastReactorPair.reactor.Switch.Peers().Size() == 0 {
-			break
-		}
-
-		time.Sleep(1 * time.Second)
-	}
-
-	assert.True(t, lastReactorPair.reactor.Switch.Peers().Size() < len(reactorPairs)-1)
-}
-
-//----------------------------------------------
-// utility funcs
-
-func makeTxs(height int64) (txs []types.Tx) {
-	for i := 0; i < 10; i++ {
-		txs = append(txs, types.Tx([]byte{byte(height), byte(i)}))
-	}
-	return txs
-}
-
-func makeBlock(height int64, state sm.State, lastCommit *types.Commit) *types.Block {
-	block, _ := state.MakeBlock(height, makeTxs(height), lastCommit, nil, state.Validators.GetProposer().Address)
-	return block
-}
-
-type testApp struct {
-	abci.BaseApplication
-}
-
-var _ abci.Application = (*testApp)(nil)
-
-func (app *testApp) Info(req abci.RequestInfo) (resInfo abci.ResponseInfo) {
-	return abci.ResponseInfo{}
-}
-
-func (app *testApp) BeginBlock(req abci.RequestBeginBlock) abci.ResponseBeginBlock {
-	return abci.ResponseBeginBlock{}
-}
-
-func (app *testApp) EndBlock(req abci.RequestEndBlock) abci.ResponseEndBlock {
-	return abci.ResponseEndBlock{}
-}
-
-func (app *testApp) DeliverTx(req abci.RequestDeliverTx) abci.ResponseDeliverTx {
-	return abci.ResponseDeliverTx{Events: []abci.Event{}}
-}
-
-func (app *testApp) CheckTx(req abci.RequestCheckTx) abci.ResponseCheckTx {
-	return abci.ResponseCheckTx{}
-}
-
-func (app *testApp) Commit() abci.ResponseCommit {
-	return abci.ResponseCommit{}
-}
-
-func (app *testApp) Query(reqQuery abci.RequestQuery) (resQuery abci.ResponseQuery) {
-	return
+	require.Eventuallyf(
+		t,
+		func() bool { return len(newSuite.reactor.pool.peers) < len(testSuites)-1 },
+		10*time.Minute,
+		10*time.Millisecond,
+		"invalid number of peers; expected < %d, got: %d",
+		len(testSuites)-1,
+		len(newSuite.reactor.pool.peers),
+	)
 }

blockchain/v0/test_util.go

@@ -0,0 +1,50 @@
+package v0
+
+import (
+	"sort"
+
+	cfg "github.com/tendermint/tendermint/config"
+	sm "github.com/tendermint/tendermint/state"
+	"github.com/tendermint/tendermint/types"
+	tmtime "github.com/tendermint/tendermint/types/time"
+)
+
+func randGenesisDoc(
+	config *cfg.Config,
+	numValidators int,
+	randPower bool,
+	minPower int64,
+) (*types.GenesisDoc, []types.PrivValidator) {
+	validators := make([]types.GenesisValidator, numValidators)
+	privValidators := make([]types.PrivValidator, numValidators)
+
+	for i := 0; i < numValidators; i++ {
+		val, privVal := types.RandValidator(randPower, minPower)
+		validators[i] = types.GenesisValidator{
+			PubKey: val.PubKey,
+			Power:  val.VotingPower,
+		}
+
+		privValidators[i] = privVal
+	}
+
+	sort.Sort(types.PrivValidatorsByAddress(privValidators))
+
+	return &types.GenesisDoc{
+		GenesisTime: tmtime.Now(),
+		ChainID:     config.ChainID(),
+		Validators:  validators,
+	}, privValidators
+}
+
+func makeTxs(height int64) (txs []types.Tx) {
+	for i := 0; i < 10; i++ {
+		txs = append(txs, types.Tx([]byte{byte(height), byte(i)}))
+	}
+	return txs
+}
+
+func makeBlock(height int64, state sm.State, lastCommit *types.Commit) *types.Block {
+	block, _ := state.MakeBlock(height, makeTxs(height), lastCommit, nil, state.Validators.GetProposer().Address)
+	return block
+}

blockchain/v1/peer.go

@@ -1,211 +0,0 @@
-package v1
-
-import (
-	"fmt"
-	"math"
-	"time"
-
-	flow "github.com/tendermint/tendermint/libs/flowrate"
-	"github.com/tendermint/tendermint/libs/log"
-	"github.com/tendermint/tendermint/p2p"
-	"github.com/tendermint/tendermint/types"
-)
-
-//--------
-// Peer
-
-// BpPeerParams stores the peer parameters that are used when creating a peer.
-type BpPeerParams struct {
-	timeout     time.Duration
-	minRecvRate int64
-	sampleRate  time.Duration
-	windowSize  time.Duration
-}
-
-// BpPeer is the datastructure associated with a fast sync peer.
-type BpPeer struct {
-	logger log.Logger
-	ID     p2p.ID
-
-	Base                    int64                  // the peer reported base
-	Height                  int64                  // the peer reported height
-	NumPendingBlockRequests int                    // number of requests still waiting for block responses
-	blocks                  map[int64]*types.Block // blocks received or expected to be received from this peer
-	blockResponseTimer      *time.Timer
-	recvMonitor             *flow.Monitor
-	params                  *BpPeerParams // parameters for timer and monitor
-
-	onErr func(err error, peerID p2p.ID) // function to call on error
-}
-
-// NewBpPeer creates a new peer.
-func NewBpPeer(peerID p2p.ID, base int64, height int64,
-	onErr func(err error, peerID p2p.ID), params *BpPeerParams) *BpPeer {
-
-	if params == nil {
-		params = BpPeerDefaultParams()
-	}
-	return &BpPeer{
-		ID:     peerID,
-		Base:   base,
-		Height: height,
-		blocks: make(map[int64]*types.Block, maxRequestsPerPeer),
-		logger: log.NewNopLogger(),
-		onErr:  onErr,
-		params: params,
-	}
-}
-
-// String returns a string representation of a peer.
-func (peer *BpPeer) String() string {
-	return fmt.Sprintf("peer: %v height: %v pending: %v", peer.ID, peer.Height, peer.NumPendingBlockRequests)
-}
-
-// SetLogger sets the logger of the peer.
-func (peer *BpPeer) SetLogger(l log.Logger) {
-	peer.logger = l
-}
-
-// Cleanup performs cleanup of the peer, removes blocks, requests, stops timer and monitor.
-func (peer *BpPeer) Cleanup() {
-	if peer.blockResponseTimer != nil {
-		peer.blockResponseTimer.Stop()
-	}
-	if peer.NumPendingBlockRequests != 0 {
-		peer.logger.Info("peer with pending requests is being cleaned", "peer", peer.ID)
-	}
-	if len(peer.blocks)-peer.NumPendingBlockRequests != 0 {
-		peer.logger.Info("peer with pending blocks is being cleaned", "peer", peer.ID)
-	}
-	for h := range peer.blocks {
-		delete(peer.blocks, h)
-	}
-	peer.NumPendingBlockRequests = 0
-	peer.recvMonitor = nil
-}
-
-// BlockAtHeight returns the block at a given height if available and errMissingBlock otherwise.
-func (peer *BpPeer) BlockAtHeight(height int64) (*types.Block, error) {
-	block, ok := peer.blocks[height]
-	if !ok {
-		return nil, errMissingBlock
-	}
-	if block == nil {
-		return nil, errMissingBlock
-	}
-	return peer.blocks[height], nil
-}
-
-// AddBlock adds a block at peer level. Block must be non-nil and recvSize a positive integer
-// The peer must have a pending request for this block.
-func (peer *BpPeer) AddBlock(block *types.Block, recvSize int) error {
-	if block == nil || recvSize < 0 {
-		panic("bad parameters")
-	}
-	existingBlock, ok := peer.blocks[block.Height]
-	if !ok {
-		peer.logger.Error("unsolicited block", "blockHeight", block.Height, "peer", peer.ID)
-		return errMissingBlock
-	}
-	if existingBlock != nil {
-		peer.logger.Error("already have a block for height", "height", block.Height)
-		return errDuplicateBlock
-	}
-	if peer.NumPendingBlockRequests == 0 {
-		panic("peer does not have pending requests")
-	}
-	peer.blocks[block.Height] = block
-	peer.NumPendingBlockRequests--
-	if peer.NumPendingBlockRequests == 0 {
-		peer.stopMonitor()
-		peer.stopBlockResponseTimer()
-	} else {
-		peer.recvMonitor.Update(recvSize)
-		peer.resetBlockResponseTimer()
-	}
-	return nil
-}
-
-// RemoveBlock removes the block of given height
-func (peer *BpPeer) RemoveBlock(height int64) {
-	delete(peer.blocks, height)
-}
-
-// RequestSent records that a request was sent, and starts the peer timer and monitor if needed.
-func (peer *BpPeer) RequestSent(height int64) {
-	peer.blocks[height] = nil
-
-	if peer.NumPendingBlockRequests == 0 {
-		peer.startMonitor()
-		peer.resetBlockResponseTimer()
-	}
-	peer.NumPendingBlockRequests++
-}
-
-// CheckRate verifies that the response rate of the peer is acceptable (higher than the minimum allowed).
-func (peer *BpPeer) CheckRate() error {
-	if peer.NumPendingBlockRequests == 0 {
-		return nil
-	}
-	curRate := peer.recvMonitor.Status().CurRate
-	// curRate can be 0 on start
-	if curRate != 0 && curRate < peer.params.minRecvRate {
-		err := errSlowPeer
-		peer.logger.Error("SendTimeout", "peer", peer,
-			"reason", err,
-			"curRate", fmt.Sprintf("%d KB/s", curRate/1024),
-			"minRate", fmt.Sprintf("%d KB/s", peer.params.minRecvRate/1024))
-		return err
-	}
-	return nil
-}
-
-func (peer *BpPeer) onTimeout() {
-	peer.onErr(errNoPeerResponse, peer.ID)
-}
-
-func (peer *BpPeer) stopMonitor() {
-	peer.recvMonitor.Done()
-	peer.recvMonitor = nil
-}
-
-func (peer *BpPeer) startMonitor() {
-	peer.recvMonitor = flow.New(peer.params.sampleRate, peer.params.windowSize)
-	initialValue := float64(peer.params.minRecvRate) * math.E
-	peer.recvMonitor.SetREMA(initialValue)
-}
-
-func (peer *BpPeer) resetBlockResponseTimer() {
-	if peer.blockResponseTimer == nil {
-		peer.blockResponseTimer = time.AfterFunc(peer.params.timeout, peer.onTimeout)
-	} else {
-		peer.blockResponseTimer.Reset(peer.params.timeout)
-	}
-}
-
-func (peer *BpPeer) stopBlockResponseTimer() bool {
-	if peer.blockResponseTimer == nil {
-		return false
-	}
-	return peer.blockResponseTimer.Stop()
-}
-
-// BpPeerDefaultParams returns the default peer parameters.
-func BpPeerDefaultParams() *BpPeerParams {
-	return &BpPeerParams{
-		// Timeout for a peer to respond to a block request.
-		timeout: 15 * time.Second,
-
-		// Minimum recv rate to ensure we're receiving blocks from a peer fast
-		// enough. If a peer is not sending data at at least that rate, we
-		// consider them to have timedout and we disconnect.
-		//
-		// Assuming a DSL connection (not a good choice) 128 Kbps (upload) ~ 15 KB/s,
-		// sending data across atlantic ~ 7.5 KB/s.
-		minRecvRate: int64(7680),
-
-		// Monitor parameters
-		sampleRate: time.Second,
-		windowSize: 40 * time.Second,
-	}
-}

blockchain/v1/peer_test.go

@@ -1,280 +0,0 @@
-package v1
-
-import (
-	"sync"
-	"testing"
-	"time"
-
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-
-	"github.com/tendermint/tendermint/libs/log"
-	tmrand "github.com/tendermint/tendermint/libs/rand"
-	"github.com/tendermint/tendermint/p2p"
-	"github.com/tendermint/tendermint/types"
-)
-
-func TestPeerMonitor(t *testing.T) {
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 10,
-		func(err error, _ p2p.ID) {},
-		nil)
-	peer.SetLogger(log.TestingLogger())
-	peer.startMonitor()
-	assert.NotNil(t, peer.recvMonitor)
-	peer.stopMonitor()
-	assert.Nil(t, peer.recvMonitor)
-}
-
-func TestPeerResetBlockResponseTimer(t *testing.T) {
-	var (
-		numErrFuncCalls int        // number of calls to the errFunc
-		lastErr         error      // last generated error
-		peerTestMtx     sync.Mutex // modifications of ^^ variables are also done from timer handler goroutine
-	)
-	params := &BpPeerParams{timeout: 20 * time.Millisecond}
-
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 10,
-		func(err error, _ p2p.ID) {
-			peerTestMtx.Lock()
-			defer peerTestMtx.Unlock()
-			lastErr = err
-			numErrFuncCalls++
-		},
-		params)
-
-	peer.SetLogger(log.TestingLogger())
-	checkByStoppingPeerTimer(t, peer, false)
-
-	// initial reset call with peer having a nil timer
-	peer.resetBlockResponseTimer()
-	assert.NotNil(t, peer.blockResponseTimer)
-	// make sure timer is running and stop it
-	checkByStoppingPeerTimer(t, peer, true)
-
-	// reset with running timer
-	peer.resetBlockResponseTimer()
-	time.Sleep(5 * time.Millisecond)
-	peer.resetBlockResponseTimer()
-	assert.NotNil(t, peer.blockResponseTimer)
-
-	// let the timer expire and ...
-	time.Sleep(50 * time.Millisecond)
-	// ... check timer is not running
-	checkByStoppingPeerTimer(t, peer, false)
-
-	peerTestMtx.Lock()
-	// ... check errNoPeerResponse has been sent
-	assert.Equal(t, 1, numErrFuncCalls)
-	assert.Equal(t, lastErr, errNoPeerResponse)
-	peerTestMtx.Unlock()
-}
-
-func TestPeerRequestSent(t *testing.T) {
-	params := &BpPeerParams{timeout: 2 * time.Millisecond}
-
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 10,
-		func(err error, _ p2p.ID) {},
-		params)
-
-	peer.SetLogger(log.TestingLogger())
-
-	peer.RequestSent(1)
-	assert.NotNil(t, peer.recvMonitor)
-	assert.NotNil(t, peer.blockResponseTimer)
-	assert.Equal(t, 1, peer.NumPendingBlockRequests)
-
-	peer.RequestSent(1)
-	assert.NotNil(t, peer.recvMonitor)
-	assert.NotNil(t, peer.blockResponseTimer)
-	assert.Equal(t, 2, peer.NumPendingBlockRequests)
-}
-
-func TestPeerGetAndRemoveBlock(t *testing.T) {
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 100,
-		func(err error, _ p2p.ID) {},
-		nil)
-
-	// Change peer height
-	peer.Height = int64(10)
-	assert.Equal(t, int64(10), peer.Height)
-
-	// request some blocks and receive few of them
-	for i := 1; i <= 10; i++ {
-		peer.RequestSent(int64(i))
-		if i > 5 {
-			// only receive blocks 1..5
-			continue
-		}
-		_ = peer.AddBlock(makeSmallBlock(i), 10)
-	}
-
-	tests := []struct {
-		name         string
-		height       int64
-		wantErr      error
-		blockPresent bool
-	}{
-		{"no request", 100, errMissingBlock, false},
-		{"no block", 6, errMissingBlock, false},
-		{"block 1 present", 1, nil, true},
-		{"block max present", 5, nil, true},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			// try to get the block
-			b, err := peer.BlockAtHeight(tt.height)
-			assert.Equal(t, tt.wantErr, err)
-			assert.Equal(t, tt.blockPresent, b != nil)
-
-			// remove the block
-			peer.RemoveBlock(tt.height)
-			_, err = peer.BlockAtHeight(tt.height)
-			assert.Equal(t, errMissingBlock, err)
-		})
-	}
-}
-
-func TestPeerAddBlock(t *testing.T) {
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 100,
-		func(err error, _ p2p.ID) {},
-		nil)
-
-	// request some blocks, receive one
-	for i := 1; i <= 10; i++ {
-		peer.RequestSent(int64(i))
-		if i == 5 {
-			// receive block 5
-			_ = peer.AddBlock(makeSmallBlock(i), 10)
-		}
-	}
-
-	tests := []struct {
-		name         string
-		height       int64
-		wantErr      error
-		blockPresent bool
-	}{
-		{"no request", 50, errMissingBlock, false},
-		{"duplicate block", 5, errDuplicateBlock, true},
-		{"block 1 successfully received", 1, nil, true},
-		{"block max successfully received", 10, nil, true},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			// try to get the block
-			err := peer.AddBlock(makeSmallBlock(int(tt.height)), 10)
-			assert.Equal(t, tt.wantErr, err)
-			_, err = peer.BlockAtHeight(tt.height)
-			assert.Equal(t, tt.blockPresent, err == nil)
-		})
-	}
-}
-
-func TestPeerOnErrFuncCalledDueToExpiration(t *testing.T) {
-
-	params := &BpPeerParams{timeout: 10 * time.Millisecond}
-	var (
-		numErrFuncCalls int        // number of calls to the onErr function
-		lastErr         error      // last generated error
-		peerTestMtx     sync.Mutex // modifications of ^^ variables are also done from timer handler goroutine
-	)
-
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 10,
-		func(err error, _ p2p.ID) {
-			peerTestMtx.Lock()
-			defer peerTestMtx.Unlock()
-			lastErr = err
-			numErrFuncCalls++
-		},
-		params)
-
-	peer.SetLogger(log.TestingLogger())
-
-	peer.RequestSent(1)
-	time.Sleep(50 * time.Millisecond)
-	// timer should have expired by now, check that the on error function was called
-	peerTestMtx.Lock()
-	assert.Equal(t, 1, numErrFuncCalls)
-	assert.Equal(t, errNoPeerResponse, lastErr)
-	peerTestMtx.Unlock()
-}
-
-func TestPeerCheckRate(t *testing.T) {
-	params := &BpPeerParams{
-		timeout:     time.Second,
-		minRecvRate: int64(100), // 100 bytes/sec exponential moving average
-	}
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 10,
-		func(err error, _ p2p.ID) {},
-		params)
-	peer.SetLogger(log.TestingLogger())
-
-	require.Nil(t, peer.CheckRate())
-
-	for i := 0; i < 40; i++ {
-		peer.RequestSent(int64(i))
-	}
-
-	// monitor starts with a higher rEMA (~ 2*minRecvRate), wait for it to go down
-	time.Sleep(900 * time.Millisecond)
-
-	// normal peer - send a bit more than 100 bytes/sec, > 10 bytes/100msec, check peer is not considered slow
-	for i := 0; i < 10; i++ {
-		_ = peer.AddBlock(makeSmallBlock(i), 11)
-		time.Sleep(100 * time.Millisecond)
-		require.Nil(t, peer.CheckRate())
-	}
-
-	// slow peer - send a bit less than 10 bytes/100msec
-	for i := 10; i < 20; i++ {
-		_ = peer.AddBlock(makeSmallBlock(i), 9)
-		time.Sleep(100 * time.Millisecond)
-	}
-	// check peer is considered slow
-	assert.Equal(t, errSlowPeer, peer.CheckRate())
-}
-
-func TestPeerCleanup(t *testing.T) {
-	params := &BpPeerParams{timeout: 2 * time.Millisecond}
-
-	peer := NewBpPeer(
-		p2p.ID(tmrand.Str(12)), 0, 10,
-		func(err error, _ p2p.ID) {},
-		params)
-	peer.SetLogger(log.TestingLogger())
-
-	assert.Nil(t, peer.blockResponseTimer)
-	peer.RequestSent(1)
-	assert.NotNil(t, peer.blockResponseTimer)
-
-	peer.Cleanup()
-	checkByStoppingPeerTimer(t, peer, false)
-}
-
-// Check if peer timer is running or not (a running timer can be successfully stopped).
-// Note: stops the timer.
-func checkByStoppingPeerTimer(t *testing.T, peer *BpPeer, running bool) {
-	assert.NotPanics(t, func() {
-		stopped := peer.stopBlockResponseTimer()
-		if running {
-			assert.True(t, stopped)
-		} else {
-			assert.False(t, stopped)
-		}
-	})
-}
-
-func makeSmallBlock(height int) *types.Block {
-	return types.MakeBlock(int64(height), []types.Tx{types.Tx("foo")}, nil, nil)
-}

blockchain/v1/pool.go

@@ -1,370 +0,0 @@
-package v1
-
-import (
-	"sort"
-
-	"github.com/tendermint/tendermint/libs/log"
-	"github.com/tendermint/tendermint/p2p"
-	"github.com/tendermint/tendermint/types"
-)
-
-// BlockPool keeps track of the fast sync peers, block requests and block responses.
-type BlockPool struct {
-	logger log.Logger
-	// Set of peers that have sent status responses, with height bigger than pool.Height
-	peers map[p2p.ID]*BpPeer
-	// Set of block heights and the corresponding peers from where a block response is expected or has been received.
-	blocks map[int64]p2p.ID
-
-	plannedRequests   map[int64]struct{} // list of blocks to be assigned peers for blockRequest
-	nextRequestHeight int64              // next height to be added to plannedRequests
-
-	Height        int64 // height of next block to execute
-	MaxPeerHeight int64 // maximum height of all peers
-	toBcR         bcReactor
-}
-
-// NewBlockPool creates a new BlockPool.
-func NewBlockPool(height int64, toBcR bcReactor) *BlockPool {
-	return &BlockPool{
-		Height:            height,
-		MaxPeerHeight:     0,
-		peers:             make(map[p2p.ID]*BpPeer),
-		blocks:            make(map[int64]p2p.ID),
-		plannedRequests:   make(map[int64]struct{}),
-		nextRequestHeight: height,
-		toBcR:             toBcR,
-	}
-}
-
-// SetLogger sets the logger of the pool.
-func (pool *BlockPool) SetLogger(l log.Logger) {
-	pool.logger = l
-}
-
-// ReachedMaxHeight check if the pool has reached the maximum peer height.
-func (pool *BlockPool) ReachedMaxHeight() bool {
-	return pool.Height >= pool.MaxPeerHeight
-}
-
-func (pool *BlockPool) rescheduleRequest(peerID p2p.ID, height int64) {
-	pool.logger.Info("reschedule requests made to peer for height ", "peerID", peerID, "height", height)
-	pool.plannedRequests[height] = struct{}{}
-	delete(pool.blocks, height)
-	pool.peers[peerID].RemoveBlock(height)
-}
-
-// Updates the pool's max height. If no peers are left MaxPeerHeight is set to 0.
-func (pool *BlockPool) updateMaxPeerHeight() {
-	var newMax int64
-	for _, peer := range pool.peers {
-		peerHeight := peer.Height
-		if peerHeight > newMax {
-			newMax = peerHeight
-		}
-	}
-	pool.MaxPeerHeight = newMax
-}
-
-// UpdatePeer adds a new peer or updates an existing peer with a new base and height.
-// If a peer is short it is not added.
-func (pool *BlockPool) UpdatePeer(peerID p2p.ID, base int64, height int64) error {
-
-	peer := pool.peers[peerID]
-
-	if peer == nil {
-		if height < pool.Height {
-			pool.logger.Info("Peer height too small",
-				"peer", peerID, "height", height, "fsm_height", pool.Height)
-			return errPeerTooShort
-		}
-		// Add new peer.
-		peer = NewBpPeer(peerID, base, height, pool.toBcR.sendPeerError, nil)
-		peer.SetLogger(pool.logger.With("peer", peerID))
-		pool.peers[peerID] = peer
-		pool.logger.Info("added peer", "peerID", peerID, "base", base, "height", height, "num_peers", len(pool.peers))
-	} else {
-		// Check if peer is lowering its height. This is not allowed.
-		if height < peer.Height {
-			pool.RemovePeer(peerID, errPeerLowersItsHeight)
-			return errPeerLowersItsHeight
-		}
-		// Update existing peer.
-		peer.Base = base
-		peer.Height = height
-	}
-
-	// Update the pool's MaxPeerHeight if needed.
-	pool.updateMaxPeerHeight()
-
-	return nil
-}
-
-// Cleans and deletes the peer. Recomputes the max peer height.
-func (pool *BlockPool) deletePeer(peer *BpPeer) {
-	if peer == nil {
-		return
-	}
-	peer.Cleanup()
-	delete(pool.peers, peer.ID)
-
-	if peer.Height == pool.MaxPeerHeight {
-		pool.updateMaxPeerHeight()
-	}
-}
-
-// RemovePeer removes the blocks and requests from the peer, reschedules them and deletes the peer.
-func (pool *BlockPool) RemovePeer(peerID p2p.ID, err error) {
-	peer := pool.peers[peerID]
-	if peer == nil {
-		return
-	}
-	pool.logger.Info("removing peer", "peerID", peerID, "error", err)
-
-	// Reschedule the block requests made to the peer, or received and not processed yet.
-	// Note that some of the requests may be removed further down.
-	for h := range pool.peers[peerID].blocks {
-		pool.rescheduleRequest(peerID, h)
-	}
-
-	oldMaxPeerHeight := pool.MaxPeerHeight
-	// Delete the peer. This operation may result in the pool's MaxPeerHeight being lowered.
-	pool.deletePeer(peer)
-
-	// Check if the pool's MaxPeerHeight has been lowered.
-	// This may happen if the tallest peer has been removed.
-	if oldMaxPeerHeight > pool.MaxPeerHeight {
-		// Remove any planned requests for heights over the new MaxPeerHeight.
-		for h := range pool.plannedRequests {
-			if h > pool.MaxPeerHeight {
-				delete(pool.plannedRequests, h)
-			}
-		}
-		// Adjust the nextRequestHeight to the new max plus one.
-		if pool.nextRequestHeight > pool.MaxPeerHeight {
-			pool.nextRequestHeight = pool.MaxPeerHeight + 1
-		}
-	}
-}
-
-func (pool *BlockPool) removeShortPeers() {
-	for _, peer := range pool.peers {
-		if peer.Height < pool.Height {
-			pool.RemovePeer(peer.ID, nil)
-		}
-	}
-}
-
-func (pool *BlockPool) removeBadPeers() {
-	pool.removeShortPeers()
-	for _, peer := range pool.peers {
-		if err := peer.CheckRate(); err != nil {
-			pool.RemovePeer(peer.ID, err)
-			pool.toBcR.sendPeerError(err, peer.ID)
-		}
-	}
-}
-
-// MakeNextRequests creates more requests if the block pool is running low.
-func (pool *BlockPool) MakeNextRequests(maxNumRequests int) {
-	heights := pool.makeRequestBatch(maxNumRequests)
-	if len(heights) != 0 {
-		pool.logger.Info("makeNextRequests will make following requests",
-			"number", len(heights), "heights", heights)
-	}
-
-	for _, height := range heights {
-		h := int64(height)
-		if !pool.sendRequest(h) {
-			// If a good peer was not found for sending the request at height h then return,
-			// as it shouldn't be possible to find a peer for h+1.
-			return
-		}
-		delete(pool.plannedRequests, h)
-	}
-}
-
-// Makes a batch of requests sorted by height such that the block pool has up to maxNumRequests entries.
-func (pool *BlockPool) makeRequestBatch(maxNumRequests int) []int {
-	pool.removeBadPeers()
-	// At this point pool.requests may include heights for requests to be redone due to removal of peers:
-	// - peers timed out or were removed by switch
-	// - FSM timed out on waiting to advance the block execution due to missing blocks at h or h+1
-	// Determine the number of requests needed by subtracting the number of requests already made from the maximum
-	// allowed
-	numNeeded := maxNumRequests - len(pool.blocks)
-	for len(pool.plannedRequests) < numNeeded {
-		if pool.nextRequestHeight > pool.MaxPeerHeight {
-			break
-		}
-		pool.plannedRequests[pool.nextRequestHeight] = struct{}{}
-		pool.nextRequestHeight++
-	}
-
-	heights := make([]int, 0, len(pool.plannedRequests))
-	for k := range pool.plannedRequests {
-		heights = append(heights, int(k))
-	}
-	sort.Ints(heights)
-	return heights
-}
-
-func (pool *BlockPool) sendRequest(height int64) bool {
-	for _, peer := range pool.peers {
-		if peer.NumPendingBlockRequests >= maxRequestsPerPeer {
-			continue
-		}
-		if peer.Base > height || peer.Height < height {
-			continue
-		}
-
-		err := pool.toBcR.sendBlockRequest(peer.ID, height)
-		if err == errNilPeerForBlockRequest {
-			// Switch does not have this peer, remove it and continue to look for another peer.
-			pool.logger.Error("switch does not have peer..removing peer selected for height", "peer",
-				peer.ID, "height", height)
-			pool.RemovePeer(peer.ID, err)
-			continue
-		}
-
-		if err == errSendQueueFull {
-			pool.logger.Error("peer queue is full", "peer", peer.ID, "height", height)
-			continue
-		}
-
-		pool.logger.Info("assigned request to peer", "peer", peer.ID, "height", height)
-
-		pool.blocks[height] = peer.ID
-		peer.RequestSent(height)
-
-		return true
-	}
-	pool.logger.Error("could not find peer to send request for block at height", "height", height)
-	return false
-}
-
-// AddBlock validates that the block comes from the peer it was expected from and stores it in the 'blocks' map.
-func (pool *BlockPool) AddBlock(peerID p2p.ID, block *types.Block, blockSize int) error {
-	peer, ok := pool.peers[peerID]
-	if !ok {
-		pool.logger.Error("block from unknown peer", "height", block.Height, "peer", peerID)
-		return errBadDataFromPeer
-	}
-	if wantPeerID, ok := pool.blocks[block.Height]; ok && wantPeerID != peerID {
-		pool.logger.Error("block received from wrong peer", "height", block.Height,
-			"peer", peerID, "expected_peer", wantPeerID)
-		return errBadDataFromPeer
-	}
-
-	return peer.AddBlock(block, blockSize)
-}
-
-// BlockData stores the peer responsible to deliver a block and the actual block if delivered.
-type BlockData struct {
-	block *types.Block
-	peer  *BpPeer
-}
-
-// BlockAndPeerAtHeight retrieves the block and delivery peer at specified height.
-// Returns errMissingBlock if a block was not found
-func (pool *BlockPool) BlockAndPeerAtHeight(height int64) (bData *BlockData, err error) {
-	peerID := pool.blocks[height]
-	peer := pool.peers[peerID]
-	if peer == nil {
-		return nil, errMissingBlock
-	}
-
-	block, err := peer.BlockAtHeight(height)
-	if err != nil {
-		return nil, err
-	}
-
-	return &BlockData{peer: peer, block: block}, nil
-
-}
-
-// FirstTwoBlocksAndPeers returns the blocks and the delivery peers at pool's height H and H+1.
-func (pool *BlockPool) FirstTwoBlocksAndPeers() (first, second *BlockData, err error) {
-	first, err = pool.BlockAndPeerAtHeight(pool.Height)
-	second, err2 := pool.BlockAndPeerAtHeight(pool.Height + 1)
-	if err == nil {
-		err = err2
-	}
-	return
-}
-
-// InvalidateFirstTwoBlocks removes the peers that sent us the first two blocks, blocks are removed by RemovePeer().
-func (pool *BlockPool) InvalidateFirstTwoBlocks(err error) {
-	first, err1 := pool.BlockAndPeerAtHeight(pool.Height)
-	second, err2 := pool.BlockAndPeerAtHeight(pool.Height + 1)
-
-	if err1 == nil {
-		pool.RemovePeer(first.peer.ID, err)
-	}
-	if err2 == nil {
-		pool.RemovePeer(second.peer.ID, err)
-	}
-}
-
-// ProcessedCurrentHeightBlock performs cleanup after a block is processed. It removes block at pool height and
-// the peers that are now short.
-func (pool *BlockPool) ProcessedCurrentHeightBlock() {
-	peerID, peerOk := pool.blocks[pool.Height]
-	if peerOk {
-		pool.peers[peerID].RemoveBlock(pool.Height)
-	}
-	delete(pool.blocks, pool.Height)
-	pool.logger.Debug("removed block at height", "height", pool.Height)
-	pool.Height++
-	pool.removeShortPeers()
-}
-
-// RemovePeerAtCurrentHeights checks if a block at pool's height H exists and if not, it removes the
-// delivery peer and returns. If a block at height H exists then the check and peer removal is done for H+1.
-// This function is called when the FSM is not able to make progress for some time.
-// This happens if either the block H or H+1 have not been delivered.
-func (pool *BlockPool) RemovePeerAtCurrentHeights(err error) {
-	peerID := pool.blocks[pool.Height]
-	peer, ok := pool.peers[peerID]
-	if ok {
-		if _, err := peer.BlockAtHeight(pool.Height); err != nil {
-			pool.logger.Info("remove peer that hasn't sent block at pool.Height",
-				"peer", peerID, "height", pool.Height)
-			pool.RemovePeer(peerID, err)
-			return
-		}
-	}
-	peerID = pool.blocks[pool.Height+1]
-	peer, ok = pool.peers[peerID]
-	if ok {
-		if _, err := peer.BlockAtHeight(pool.Height + 1); err != nil {
-			pool.logger.Info("remove peer that hasn't sent block at pool.Height+1",
-				"peer", peerID, "height", pool.Height+1)
-			pool.RemovePeer(peerID, err)
-			return
-		}
-	}
-}
-
-// Cleanup performs pool and peer cleanup
-func (pool *BlockPool) Cleanup() {
-	for id, peer := range pool.peers {
-		peer.Cleanup()
-		delete(pool.peers, id)
-	}
-	pool.plannedRequests = make(map[int64]struct{})
-	pool.blocks = make(map[int64]p2p.ID)
-	pool.nextRequestHeight = 0
-	pool.Height = 0
-	pool.MaxPeerHeight = 0
-}
-
-// NumPeers returns the number of peers in the pool
-func (pool *BlockPool) NumPeers() int {
-	return len(pool.peers)
-}
-
-// NeedsBlocks returns true if more blocks are required.
-func (pool *BlockPool) NeedsBlocks() bool {
-	return len(pool.blocks) < maxNumRequests
-}

blockchain/v1/pool_test.go

@@ -1,691 +0,0 @@
-package v1
-
-import (
-	"testing"
-	"time"
-
-	"github.com/stretchr/testify/assert"
-
-	"github.com/tendermint/tendermint/libs/log"
-	"github.com/tendermint/tendermint/p2p"
-	"github.com/tendermint/tendermint/types"
-)
-
-type testPeer struct {
-	id     p2p.ID
-	base   int64
-	height int64
-}
-
-type testBcR struct {
-	logger log.Logger
-}
-
-type testValues struct {
-	numRequestsSent int
-}
-
-var testResults testValues
-
-func resetPoolTestResults() {
-	testResults.numRequestsSent = 0
-}
-
-func (testR *testBcR) sendPeerError(err error, peerID p2p.ID) {
-}
-
-func (testR *testBcR) sendStatusRequest() {
-}
-
-func (testR *testBcR) sendBlockRequest(peerID p2p.ID, height int64) error {
-	testResults.numRequestsSent++
-	return nil
-}
-
-func (testR *testBcR) resetStateTimer(name string, timer **time.Timer, timeout time.Duration) {
-}
-
-func (testR *testBcR) switchToConsensus() {
-
-}
-
-func newTestBcR() *testBcR {
-	testBcR := &testBcR{logger: log.TestingLogger()}
-	return testBcR
-}
-
-type tPBlocks struct {
-	id     p2p.ID
-	create bool
-}
-
-// Makes a block pool with specified current height, list of peers, block requests and block responses
-func makeBlockPool(bcr *testBcR, height int64, peers []BpPeer, blocks map[int64]tPBlocks) *BlockPool {
-	bPool := NewBlockPool(height, bcr)
-	bPool.SetLogger(bcr.logger)
-
-	txs := []types.Tx{types.Tx("foo"), types.Tx("bar")}
-
-	var maxH int64
-	for _, p := range peers {
-		if p.Height > maxH {
-			maxH = p.Height
-		}
-		bPool.peers[p.ID] = NewBpPeer(p.ID, p.Base, p.Height, bcr.sendPeerError, nil)
-		bPool.peers[p.ID].SetLogger(bcr.logger)
-
-	}
-	bPool.MaxPeerHeight = maxH
-	for h, p := range blocks {
-		bPool.blocks[h] = p.id
-		bPool.peers[p.id].RequestSent(h)
-		if p.create {
-			// simulate that a block at height h has been received
-			_ = bPool.peers[p.id].AddBlock(types.MakeBlock(h, txs, nil, nil), 100)
-		}
-	}
-	return bPool
-}
-
-func assertPeerSetsEquivalent(t *testing.T, set1 map[p2p.ID]*BpPeer, set2 map[p2p.ID]*BpPeer) {
-	assert.Equal(t, len(set1), len(set2))
-	for peerID, peer1 := range set1 {
-		peer2 := set2[peerID]
-		assert.NotNil(t, peer2)
-		assert.Equal(t, peer1.NumPendingBlockRequests, peer2.NumPendingBlockRequests)
-		assert.Equal(t, peer1.Height, peer2.Height)
-		assert.Equal(t, peer1.Base, peer2.Base)
-		assert.Equal(t, len(peer1.blocks), len(peer2.blocks))
-		for h, block1 := range peer1.blocks {
-			block2 := peer2.blocks[h]
-			// block1 and block2 could be nil if a request was made but no block was received
-			assert.Equal(t, block1, block2)
-		}
-	}
-}
-
-func assertBlockPoolEquivalent(t *testing.T, poolWanted, pool *BlockPool) {
-	assert.Equal(t, poolWanted.blocks, pool.blocks)
-	assertPeerSetsEquivalent(t, poolWanted.peers, pool.peers)
-	assert.Equal(t, poolWanted.MaxPeerHeight, pool.MaxPeerHeight)
-	assert.Equal(t, poolWanted.Height, pool.Height)
-
-}
-
-func TestBlockPoolUpdatePeer(t *testing.T) {
-	testBcR := newTestBcR()
-
-	tests := []struct {
-		name       string
-		pool       *BlockPool
-		args       testPeer
-		poolWanted *BlockPool
-		errWanted  error
-	}{
-		{
-			name:       "add a first short peer",
-			pool:       makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-			args:       testPeer{"P1", 0, 50},
-			errWanted:  errPeerTooShort,
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-		},
-		{
-			name:       "add a first good peer",
-			pool:       makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-			args:       testPeer{"P1", 0, 101},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 101}}, map[int64]tPBlocks{}),
-		},
-		{
-			name:       "add a first good peer with base",
-			pool:       makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-			args:       testPeer{"P1", 10, 101},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Base: 10, Height: 101}}, map[int64]tPBlocks{}),
-		},
-		{
-			name:       "increase the height of P1 from 120 to 123",
-			pool:       makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}}, map[int64]tPBlocks{}),
-			args:       testPeer{"P1", 0, 123},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 123}}, map[int64]tPBlocks{}),
-		},
-		{
-			name:       "decrease the height of P1 from 120 to 110",
-			pool:       makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}}, map[int64]tPBlocks{}),
-			args:       testPeer{"P1", 0, 110},
-			errWanted:  errPeerLowersItsHeight,
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "decrease the height of P1 from 105 to 102 with blocks",
-			pool: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 105}},
-				map[int64]tPBlocks{
-					100: {"P1", true}, 101: {"P1", true}, 102: {"P1", true}}),
-			args:      testPeer{"P1", 0, 102},
-			errWanted: errPeerLowersItsHeight,
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{},
-				map[int64]tPBlocks{}),
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			pool := tt.pool
-			err := pool.UpdatePeer(tt.args.id, tt.args.base, tt.args.height)
-			assert.Equal(t, tt.errWanted, err)
-			assert.Equal(t, tt.poolWanted.blocks, tt.pool.blocks)
-			assertPeerSetsEquivalent(t, tt.poolWanted.peers, tt.pool.peers)
-			assert.Equal(t, tt.poolWanted.MaxPeerHeight, tt.pool.MaxPeerHeight)
-		})
-	}
-}
-
-func TestBlockPoolRemovePeer(t *testing.T) {
-	testBcR := newTestBcR()
-
-	type args struct {
-		peerID p2p.ID
-		err    error
-	}
-
-	tests := []struct {
-		name       string
-		pool       *BlockPool
-		args       args
-		poolWanted *BlockPool
-	}{
-		{
-			name:       "attempt to delete non-existing peer",
-			pool:       makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}}, map[int64]tPBlocks{}),
-			args:       args{"P99", nil},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}}, map[int64]tPBlocks{}),
-		},
-		{
-			name:       "delete the only peer without blocks",
-			pool:       makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}}, map[int64]tPBlocks{}),
-			args:       args{"P1", nil},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "delete the shortest of two peers without blocks",
-			pool: makeBlockPool(
-				testBcR,
-				100,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 120}},
-				map[int64]tPBlocks{}),
-			args:       args{"P1", nil},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P2", Height: 120}}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "delete the tallest of two peers without blocks",
-			pool: makeBlockPool(
-				testBcR,
-				100,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 120}},
-				map[int64]tPBlocks{}),
-			args:       args{"P2", nil},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 100}}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "delete the only peer with block requests sent and blocks received",
-			pool: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}},
-				map[int64]tPBlocks{100: {"P1", true}, 101: {"P1", false}}),
-			args:       args{"P1", nil},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "delete the shortest of two peers with block requests sent and blocks received",
-			pool: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}, {ID: "P2", Height: 200}},
-				map[int64]tPBlocks{100: {"P1", true}, 101: {"P1", false}}),
-			args:       args{"P1", nil},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P2", Height: 200}}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "delete the tallest of two peers with block requests sent and blocks received",
-			pool: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}, {ID: "P2", Height: 110}},
-				map[int64]tPBlocks{100: {"P1", true}, 101: {"P1", false}}),
-			args:       args{"P1", nil},
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P2", Height: 110}}, map[int64]tPBlocks{}),
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			tt.pool.RemovePeer(tt.args.peerID, tt.args.err)
-			assertBlockPoolEquivalent(t, tt.poolWanted, tt.pool)
-		})
-	}
-}
-
-func TestBlockPoolRemoveShortPeers(t *testing.T) {
-	testBcR := newTestBcR()
-
-	tests := []struct {
-		name       string
-		pool       *BlockPool
-		poolWanted *BlockPool
-	}{
-		{
-			name: "no short peers",
-			pool: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 110}, {ID: "P3", Height: 120}}, map[int64]tPBlocks{}),
-			poolWanted: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 110}, {ID: "P3", Height: 120}}, map[int64]tPBlocks{}),
-		},
-
-		{
-			name: "one short peer",
-			pool: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 90}, {ID: "P3", Height: 120}}, map[int64]tPBlocks{}),
-			poolWanted: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P3", Height: 120}}, map[int64]tPBlocks{}),
-		},
-
-		{
-			name: "all short peers",
-			pool: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 90}, {ID: "P2", Height: 91}, {ID: "P3", Height: 92}}, map[int64]tPBlocks{}),
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			pool := tt.pool
-			pool.removeShortPeers()
-			assertBlockPoolEquivalent(t, tt.poolWanted, tt.pool)
-		})
-	}
-}
-
-func TestBlockPoolSendRequestBatch(t *testing.T) {
-	type testPeerResult struct {
-		id                      p2p.ID
-		numPendingBlockRequests int
-	}
-
-	testBcR := newTestBcR()
-
-	tests := []struct {
-		name               string
-		pool               *BlockPool
-		maxRequestsPerPeer int
-		expRequests        map[int64]bool
-		expRequestsSent    int
-		expPeerResults     []testPeerResult
-	}{
-		{
-			name:               "one peer - send up to maxRequestsPerPeer block requests",
-			pool:               makeBlockPool(testBcR, 10, []BpPeer{{ID: "P1", Height: 100}}, map[int64]tPBlocks{}),
-			maxRequestsPerPeer: 2,
-			expRequests:        map[int64]bool{10: true, 11: true},
-			expRequestsSent:    2,
-			expPeerResults:     []testPeerResult{{id: "P1", numPendingBlockRequests: 2}},
-		},
-		{
-			name: "multiple peers - stops at gap between height and base",
-			pool: makeBlockPool(testBcR, 10, []BpPeer{
-				{ID: "P1", Base: 1, Height: 12},
-				{ID: "P2", Base: 15, Height: 100},
-			}, map[int64]tPBlocks{}),
-			maxRequestsPerPeer: 10,
-			expRequests:        map[int64]bool{10: true, 11: true, 12: true},
-			expRequestsSent:    3,
-			expPeerResults: []testPeerResult{
-				{id: "P1", numPendingBlockRequests: 3},
-				{id: "P2", numPendingBlockRequests: 0},
-			},
-		},
-		{
-			name: "n peers - send n*maxRequestsPerPeer block requests",
-			pool: makeBlockPool(
-				testBcR,
-				10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{}),
-			maxRequestsPerPeer: 2,
-			expRequests:        map[int64]bool{10: true, 11: true},
-			expRequestsSent:    4,
-			expPeerResults: []testPeerResult{
-				{id: "P1", numPendingBlockRequests: 2},
-				{id: "P2", numPendingBlockRequests: 2}},
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			resetPoolTestResults()
-
-			var pool = tt.pool
-			maxRequestsPerPeer = tt.maxRequestsPerPeer
-			pool.MakeNextRequests(10)
-
-			assert.Equal(t, tt.expRequestsSent, testResults.numRequestsSent)
-			for _, tPeer := range tt.expPeerResults {
-				var peer = pool.peers[tPeer.id]
-				assert.NotNil(t, peer)
-				assert.Equal(t, tPeer.numPendingBlockRequests, peer.NumPendingBlockRequests)
-			}
-		})
-	}
-}
-
-func TestBlockPoolAddBlock(t *testing.T) {
-	testBcR := newTestBcR()
-	txs := []types.Tx{types.Tx("foo"), types.Tx("bar")}
-
-	type args struct {
-		peerID    p2p.ID
-		block     *types.Block
-		blockSize int
-	}
-	tests := []struct {
-		name       string
-		pool       *BlockPool
-		args       args
-		poolWanted *BlockPool
-		errWanted  error
-	}{
-		{name: "block from unknown peer",
-			pool: makeBlockPool(testBcR, 10, []BpPeer{{ID: "P1", Height: 100}}, map[int64]tPBlocks{}),
-			args: args{
-				peerID:    "P2",
-				block:     types.MakeBlock(int64(10), txs, nil, nil),
-				blockSize: 100,
-			},
-			poolWanted: makeBlockPool(testBcR, 10, []BpPeer{{ID: "P1", Height: 100}}, map[int64]tPBlocks{}),
-			errWanted:  errBadDataFromPeer,
-		},
-		{name: "unexpected block 11 from known peer - waiting for 10",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", false}}),
-			args: args{
-				peerID:    "P1",
-				block:     types.MakeBlock(int64(11), txs, nil, nil),
-				blockSize: 100,
-			},
-			poolWanted: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", false}}),
-			errWanted: errMissingBlock,
-		},
-		{name: "unexpected block 10 from known peer - already have 10",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", true}, 11: {"P1", false}}),
-			args: args{
-				peerID:    "P1",
-				block:     types.MakeBlock(int64(10), txs, nil, nil),
-				blockSize: 100,
-			},
-			poolWanted: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", true}, 11: {"P1", false}}),
-			errWanted: errDuplicateBlock,
-		},
-		{name: "unexpected block 10 from known peer P2 - expected 10 to come from P1",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", false}}),
-			args: args{
-				peerID:    "P2",
-				block:     types.MakeBlock(int64(10), txs, nil, nil),
-				blockSize: 100,
-			},
-			poolWanted: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", false}}),
-			errWanted: errBadDataFromPeer,
-		},
-		{name: "expected block from known peer",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", false}}),
-			args: args{
-				peerID:    "P1",
-				block:     types.MakeBlock(int64(10), txs, nil, nil),
-				blockSize: 100,
-			},
-			poolWanted: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", true}}),
-			errWanted: nil,
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			err := tt.pool.AddBlock(tt.args.peerID, tt.args.block, tt.args.blockSize)
-			assert.Equal(t, tt.errWanted, err)
-			assertBlockPoolEquivalent(t, tt.poolWanted, tt.pool)
-		})
-	}
-}
-
-func TestBlockPoolFirstTwoBlocksAndPeers(t *testing.T) {
-	testBcR := newTestBcR()
-
-	tests := []struct {
-		name         string
-		pool         *BlockPool
-		firstWanted  int64
-		secondWanted int64
-		errWanted    error
-	}{
-		{
-			name: "both blocks missing",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{15: {"P1", true}, 16: {"P2", true}}),
-			errWanted: errMissingBlock,
-		},
-		{
-			name: "second block missing",
-			pool: makeBlockPool(testBcR, 15,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{15: {"P1", true}, 18: {"P2", true}}),
-			firstWanted: 15,
-			errWanted:   errMissingBlock,
-		},
-		{
-			name: "first block missing",
-			pool: makeBlockPool(testBcR, 15,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{16: {"P2", true}, 18: {"P2", true}}),
-			secondWanted: 16,
-			errWanted:    errMissingBlock,
-		},
-		{
-			name: "both blocks present",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", true}, 11: {"P2", true}}),
-			firstWanted:  10,
-			secondWanted: 11,
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			pool := tt.pool
-			gotFirst, gotSecond, err := pool.FirstTwoBlocksAndPeers()
-			assert.Equal(t, tt.errWanted, err)
-
-			if tt.firstWanted != 0 {
-				peer := pool.blocks[tt.firstWanted]
-				block := pool.peers[peer].blocks[tt.firstWanted]
-				assert.Equal(t, block, gotFirst.block,
-					"BlockPool.FirstTwoBlocksAndPeers() gotFirst = %v, want %v",
-					tt.firstWanted, gotFirst.block.Height)
-			}
-
-			if tt.secondWanted != 0 {
-				peer := pool.blocks[tt.secondWanted]
-				block := pool.peers[peer].blocks[tt.secondWanted]
-				assert.Equal(t, block, gotSecond.block,
-					"BlockPool.FirstTwoBlocksAndPeers() gotFirst = %v, want %v",
-					tt.secondWanted, gotSecond.block.Height)
-			}
-		})
-	}
-}
-
-func TestBlockPoolInvalidateFirstTwoBlocks(t *testing.T) {
-	testBcR := newTestBcR()
-
-	tests := []struct {
-		name       string
-		pool       *BlockPool
-		poolWanted *BlockPool
-	}{
-		{
-			name: "both blocks missing",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{15: {"P1", true}, 16: {"P2", true}}),
-			poolWanted: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{15: {"P1", true}, 16: {"P2", true}}),
-		},
-		{
-			name: "second block missing",
-			pool: makeBlockPool(testBcR, 15,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{15: {"P1", true}, 18: {"P2", true}}),
-			poolWanted: makeBlockPool(testBcR, 15,
-				[]BpPeer{{ID: "P2", Height: 100}},
-				map[int64]tPBlocks{18: {"P2", true}}),
-		},
-		{
-			name: "first block missing",
-			pool: makeBlockPool(testBcR, 15,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{18: {"P1", true}, 16: {"P2", true}}),
-			poolWanted: makeBlockPool(testBcR, 15,
-				[]BpPeer{{ID: "P1", Height: 100}},
-				map[int64]tPBlocks{18: {"P1", true}}),
-		},
-		{
-			name: "both blocks present",
-			pool: makeBlockPool(testBcR, 10,
-				[]BpPeer{{ID: "P1", Height: 100}, {ID: "P2", Height: 100}},
-				map[int64]tPBlocks{10: {"P1", true}, 11: {"P2", true}}),
-			poolWanted: makeBlockPool(testBcR, 10,
-				[]BpPeer{},
-				map[int64]tPBlocks{}),
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			tt.pool.InvalidateFirstTwoBlocks(errNoPeerResponse)
-			assertBlockPoolEquivalent(t, tt.poolWanted, tt.pool)
-		})
-	}
-}
-
-func TestProcessedCurrentHeightBlock(t *testing.T) {
-	testBcR := newTestBcR()
-
-	tests := []struct {
-		name       string
-		pool       *BlockPool
-		poolWanted *BlockPool
-	}{
-		{
-			name: "one peer",
-			pool: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}},
-				map[int64]tPBlocks{100: {"P1", true}, 101: {"P1", true}}),
-			poolWanted: makeBlockPool(testBcR, 101, []BpPeer{{ID: "P1", Height: 120}},
-				map[int64]tPBlocks{101: {"P1", true}}),
-		},
-		{
-			name: "multiple peers",
-			pool: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 120}, {ID: "P2", Height: 120}, {ID: "P3", Height: 130}},
-				map[int64]tPBlocks{
-					100: {"P1", true}, 104: {"P1", true}, 105: {"P1", false},
-					101: {"P2", true}, 103: {"P2", false},
-					102: {"P3", true}, 106: {"P3", true}}),
-			poolWanted: makeBlockPool(testBcR, 101,
-				[]BpPeer{{ID: "P1", Height: 120}, {ID: "P2", Height: 120}, {ID: "P3", Height: 130}},
-				map[int64]tPBlocks{
-					104: {"P1", true}, 105: {"P1", false},
-					101: {"P2", true}, 103: {"P2", false},
-					102: {"P3", true}, 106: {"P3", true}}),
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			tt.pool.ProcessedCurrentHeightBlock()
-			assertBlockPoolEquivalent(t, tt.poolWanted, tt.pool)
-		})
-	}
-}
-
-func TestRemovePeerAtCurrentHeight(t *testing.T) {
-	testBcR := newTestBcR()
-
-	tests := []struct {
-		name       string
-		pool       *BlockPool
-		poolWanted *BlockPool
-	}{
-		{
-			name: "one peer, remove peer for block at H",
-			pool: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}},
-				map[int64]tPBlocks{100: {"P1", false}, 101: {"P1", true}}),
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "one peer, remove peer for block at H+1",
-			pool: makeBlockPool(testBcR, 100, []BpPeer{{ID: "P1", Height: 120}},
-				map[int64]tPBlocks{100: {"P1", true}, 101: {"P1", false}}),
-			poolWanted: makeBlockPool(testBcR, 100, []BpPeer{}, map[int64]tPBlocks{}),
-		},
-		{
-			name: "multiple peers, remove peer for block at H",
-			pool: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 120}, {ID: "P2", Height: 120}, {ID: "P3", Height: 130}},
-				map[int64]tPBlocks{
-					100: {"P1", false}, 104: {"P1", true}, 105: {"P1", false},
-					101: {"P2", true}, 103: {"P2", false},
-					102: {"P3", true}, 106: {"P3", true}}),
-			poolWanted: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P2", Height: 120}, {ID: "P3", Height: 130}},
-				map[int64]tPBlocks{
-					101: {"P2", true}, 103: {"P2", false},
-					102: {"P3", true}, 106: {"P3", true}}),
-		},
-		{
-			name: "multiple peers, remove peer for block at H+1",
-			pool: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 120}, {ID: "P2", Height: 120}, {ID: "P3", Height: 130}},
-				map[int64]tPBlocks{
-					100: {"P1", true}, 104: {"P1", true}, 105: {"P1", false},
-					101: {"P2", false}, 103: {"P2", false},
-					102: {"P3", true}, 106: {"P3", true}}),
-			poolWanted: makeBlockPool(testBcR, 100,
-				[]BpPeer{{ID: "P1", Height: 120}, {ID: "P3", Height: 130}},
-				map[int64]tPBlocks{
-					100: {"P1", true}, 104: {"P1", true}, 105: {"P1", false},
-					102: {"P3", true}, 106: {"P3", true}}),
-		},
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			tt.pool.RemovePeerAtCurrentHeights(errNoPeerResponse)
-			assertBlockPoolEquivalent(t, tt.poolWanted, tt.pool)
-		})
-	}
-}

blockchain/v1/reactor.go

@@ -1,569 +0,0 @@
-package v1
-
-import (
-	"fmt"
-	"reflect"
-	"time"
-
-	"github.com/tendermint/tendermint/behaviour"
-	bc "github.com/tendermint/tendermint/blockchain"
-	"github.com/tendermint/tendermint/libs/log"
-	"github.com/tendermint/tendermint/p2p"
-	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
-	sm "github.com/tendermint/tendermint/state"
-	"github.com/tendermint/tendermint/store"
-	"github.com/tendermint/tendermint/types"
-)
-
-const (
-	// BlockchainChannel is a channel for blocks and status updates (`BlockStore` height)
-	BlockchainChannel = byte(0x40)
-	trySyncIntervalMS = 10
-	trySendIntervalMS = 10
-
-	// ask for best height every 10s
-	statusUpdateIntervalSeconds = 10
-)
-
-var (
-	// Maximum number of requests that can be pending per peer, i.e. for which requests have been sent but blocks
-	// have not been received.
-	maxRequestsPerPeer = 20
-	// Maximum number of block requests for the reactor, pending or for which blocks have been received.
-	maxNumRequests = 64
-)
-
-type consensusReactor interface {
-	// for when we switch from blockchain reactor and fast sync to
-	// the consensus machine
-	SwitchToConsensus(state sm.State, skipWAL bool)
-}
-
-// BlockchainReactor handles long-term catchup syncing.
-type BlockchainReactor struct {
-	p2p.BaseReactor
-
-	initialState sm.State // immutable
-	state        sm.State
-
-	blockExec *sm.BlockExecutor
-	store     *store.BlockStore
-
-	fastSync    bool
-	stateSynced bool
-
-	fsm          *BcReactorFSM
-	blocksSynced uint64
-
-	// Receive goroutine forwards messages to this channel to be processed in the context of the poolRoutine.
-	messagesForFSMCh chan bcReactorMessage
-
-	// Switch goroutine may send RemovePeer to the blockchain reactor. This is an error message that is relayed
-	// to this channel to be processed in the context of the poolRoutine.
-	errorsForFSMCh chan bcReactorMessage
-
-	// This channel is used by the FSM and indirectly the block pool to report errors to the blockchain reactor and
-	// the switch.
-	eventsFromFSMCh chan bcFsmMessage
-
-	swReporter *behaviour.SwitchReporter
-}
-
-// NewBlockchainReactor returns new reactor instance.
-func NewBlockchainReactor(state sm.State, blockExec *sm.BlockExecutor, store *store.BlockStore,
-	fastSync bool) *BlockchainReactor {
-
-	if state.LastBlockHeight != store.Height() {
-		panic(fmt.Sprintf("state (%v) and store (%v) height mismatch", state.LastBlockHeight,
-			store.Height()))
-	}
-
-	const capacity = 1000
-	eventsFromFSMCh := make(chan bcFsmMessage, capacity)
-	messagesForFSMCh := make(chan bcReactorMessage, capacity)
-	errorsForFSMCh := make(chan bcReactorMessage, capacity)
-
-	startHeight := store.Height() + 1
-	if startHeight == 1 {
-		startHeight = state.InitialHeight
-	}
-	bcR := &BlockchainReactor{
-		initialState:     state,
-		state:            state,
-		blockExec:        blockExec,
-		fastSync:         fastSync,
-		store:            store,
-		messagesForFSMCh: messagesForFSMCh,
-		eventsFromFSMCh:  eventsFromFSMCh,
-		errorsForFSMCh:   errorsForFSMCh,
-	}
-	fsm := NewFSM(startHeight, bcR)
-	bcR.fsm = fsm
-	bcR.BaseReactor = *p2p.NewBaseReactor("BlockchainReactor", bcR)
-	// bcR.swReporter = behaviour.NewSwitchReporter(bcR.BaseReactor.Switch)
-
-	return bcR
-}
-
-// bcReactorMessage is used by the reactor to send messages to the FSM.
-type bcReactorMessage struct {
-	event bReactorEvent
-	data  bReactorEventData
-}
-
-type bFsmEvent uint
-
-const (
-	// message type events
-	peerErrorEv = iota + 1
-	syncFinishedEv
-)
-
-type bFsmEventData struct {
-	peerID p2p.ID
-	err    error
-}
-
-// bcFsmMessage is used by the FSM to send messages to the reactor
-type bcFsmMessage struct {
-	event bFsmEvent
-	data  bFsmEventData
-}
-
-// SetLogger implements service.Service by setting the logger on reactor and pool.
-func (bcR *BlockchainReactor) SetLogger(l log.Logger) {
-	bcR.BaseService.Logger = l
-	bcR.fsm.SetLogger(l)
-}
-
-// OnStart implements service.Service.
-func (bcR *BlockchainReactor) OnStart() error {
-	bcR.swReporter = behaviour.NewSwitchReporter(bcR.BaseReactor.Switch)
-	if bcR.fastSync {
-		go bcR.poolRoutine()
-	}
-	return nil
-}
-
-// OnStop implements service.Service.
-func (bcR *BlockchainReactor) OnStop() {
-	_ = bcR.Stop()
-}
-
-// SwitchToFastSync is called by the state sync reactor when switching to fast sync.
-func (bcR *BlockchainReactor) SwitchToFastSync(state sm.State) error {
-	bcR.fastSync = true
-	bcR.initialState = state
-	bcR.state = state
-	bcR.stateSynced = true
-
-	bcR.fsm = NewFSM(state.LastBlockHeight+1, bcR)
-	bcR.fsm.SetLogger(bcR.Logger)
-	go bcR.poolRoutine()
-	return nil
-}
-
-// GetChannels implements Reactor
-func (bcR *BlockchainReactor) GetChannels() []*p2p.ChannelDescriptor {
-	return []*p2p.ChannelDescriptor{
-		{
-			ID:                  BlockchainChannel,
-			Priority:            10,
-			SendQueueCapacity:   2000,
-			RecvBufferCapacity:  50 * 4096,
-			RecvMessageCapacity: bc.MaxMsgSize,
-		},
-	}
-}
-
-// AddPeer implements Reactor by sending our state to peer.
-func (bcR *BlockchainReactor) AddPeer(peer p2p.Peer) {
-	msgBytes, err := bc.EncodeMsg(&bcproto.StatusResponse{
-		Base:   bcR.store.Base(),
-		Height: bcR.store.Height(),
-	})
-	if err != nil {
-		bcR.Logger.Error("could not convert msg to protobuf", "err", err)
-		return
-	}
-	peer.Send(BlockchainChannel, msgBytes)
-	// it's OK if send fails. will try later in poolRoutine
-
-	// peer is added to the pool once we receive the first
-	// bcStatusResponseMessage from the peer and call pool.updatePeer()
-}
-
-// sendBlockToPeer loads a block and sends it to the requesting peer.
-// If the block doesn't exist a bcNoBlockResponseMessage is sent.
-// If all nodes are honest, no node should be requesting for a block that doesn't exist.
-func (bcR *BlockchainReactor) sendBlockToPeer(msg *bcproto.BlockRequest,
-	src p2p.Peer) (queued bool) {
-
-	block := bcR.store.LoadBlock(msg.Height)
-	if block != nil {
-		pbbi, err := block.ToProto()
-		if err != nil {
-			bcR.Logger.Error("Could not send block message to peer", "err", err)
-			return false
-		}
-		msgBytes, err := bc.EncodeMsg(&bcproto.BlockResponse{Block: pbbi})
-		if err != nil {
-			bcR.Logger.Error("unable to marshal msg", "err", err)
-			return false
-		}
-		return src.TrySend(BlockchainChannel, msgBytes)
-	}
-
-	bcR.Logger.Info("peer asking for a block we don't have", "src", src, "height", msg.Height)
-
-	msgBytes, err := bc.EncodeMsg(&bcproto.NoBlockResponse{Height: msg.Height})
-	if err != nil {
-		bcR.Logger.Error("unable to marshal msg", "err", err)
-		return false
-	}
-	return src.TrySend(BlockchainChannel, msgBytes)
-}
-
-func (bcR *BlockchainReactor) sendStatusResponseToPeer(msg *bcproto.StatusRequest, src p2p.Peer) (queued bool) {
-	msgBytes, err := bc.EncodeMsg(&bcproto.StatusResponse{
-		Base:   bcR.store.Base(),
-		Height: bcR.store.Height(),
-	})
-	if err != nil {
-		bcR.Logger.Error("unable to marshal msg", "err", err)
-		return false
-	}
-
-	return src.TrySend(BlockchainChannel, msgBytes)
-}
-
-// RemovePeer implements Reactor by removing peer from the pool.
-func (bcR *BlockchainReactor) RemovePeer(peer p2p.Peer, reason interface{}) {
-	msgData := bcReactorMessage{
-		event: peerRemoveEv,
-		data: bReactorEventData{
-			peerID: peer.ID(),
-			err:    errSwitchRemovesPeer,
-		},
-	}
-	bcR.errorsForFSMCh <- msgData
-}
-
-// Receive implements Reactor by handling 4 types of messages (look below).
-func (bcR *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
-	msg, err := bc.DecodeMsg(msgBytes)
-	if err != nil {
-		bcR.Logger.Error("error decoding message", "src", src, "chId", chID, "err", err)
-		_ = bcR.swReporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
-		return
-	}
-
-	if err = bc.ValidateMsg(msg); err != nil {
-		bcR.Logger.Error("peer sent us invalid msg", "peer", src, "msg", msg, "err", err)
-		_ = bcR.swReporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
-		return
-	}
-
-	bcR.Logger.Debug("Receive", "src", src, "chID", chID, "msg", msg)
-
-	switch msg := msg.(type) {
-	case *bcproto.BlockRequest:
-		if queued := bcR.sendBlockToPeer(msg, src); !queued {
-			// Unfortunately not queued since the queue is full.
-			bcR.Logger.Error("Could not send block message to peer", "src", src, "height", msg.Height)
-		}
-
-	case *bcproto.StatusRequest:
-		// Send peer our state.
-		if queued := bcR.sendStatusResponseToPeer(msg, src); !queued {
-			// Unfortunately not queued since the queue is full.
-			bcR.Logger.Error("Could not send status message to peer", "src", src)
-		}
-
-	case *bcproto.BlockResponse:
-		bi, err := types.BlockFromProto(msg.Block)
-		if err != nil {
-			bcR.Logger.Error("error transition block from protobuf", "err", err)
-			return
-		}
-		msgForFSM := bcReactorMessage{
-			event: blockResponseEv,
-			data: bReactorEventData{
-				peerID: src.ID(),
-				height: bi.Height,
-				block:  bi,
-				length: len(msgBytes),
-			},
-		}
-		bcR.Logger.Info("Received", "src", src, "height", bi.Height)
-		bcR.messagesForFSMCh <- msgForFSM
-	case *bcproto.NoBlockResponse:
-		msgForFSM := bcReactorMessage{
-			event: noBlockResponseEv,
-			data: bReactorEventData{
-				peerID: src.ID(),
-				height: msg.Height,
-			},
-		}
-		bcR.Logger.Debug("Peer does not have requested block", "peer", src, "height", msg.Height)
-		bcR.messagesForFSMCh <- msgForFSM
-
-	case *bcproto.StatusResponse:
-		// Got a peer status. Unverified.
-		msgForFSM := bcReactorMessage{
-			event: statusResponseEv,
-			data: bReactorEventData{
-				peerID: src.ID(),
-				height: msg.Height,
-				length: len(msgBytes),
-			},
-		}
-		bcR.messagesForFSMCh <- msgForFSM
-
-	default:
-		bcR.Logger.Error(fmt.Sprintf("unknown message type %v", reflect.TypeOf(msg)))
-	}
-}
-
-// processBlocksRoutine processes blocks until signlaed to stop over the stopProcessing channel
-func (bcR *BlockchainReactor) processBlocksRoutine(stopProcessing chan struct{}) {
-
-	processReceivedBlockTicker := time.NewTicker(trySyncIntervalMS * time.Millisecond)
-	doProcessBlockCh := make(chan struct{}, 1)
-
-	lastHundred := time.Now()
-	lastRate := 0.0
-
-ForLoop:
-	for {
-		select {
-		case <-stopProcessing:
-			bcR.Logger.Info("finishing block execution")
-			break ForLoop
-		case <-processReceivedBlockTicker.C: // try to execute blocks
-			select {
-			case doProcessBlockCh <- struct{}{}:
-			default:
-			}
-		case <-doProcessBlockCh:
-			for {
-				err := bcR.processBlock()
-				if err == errMissingBlock {
-					break
-				}
-				// Notify FSM of block processing result.
-				msgForFSM := bcReactorMessage{
-					event: processedBlockEv,
-					data: bReactorEventData{
-						err: err,
-					},
-				}
-				_ = bcR.fsm.Handle(&msgForFSM)
-
-				if err != nil {
-					break
-				}
-
-				bcR.blocksSynced++
-				if bcR.blocksSynced%100 == 0 {
-					lastRate = 0.9*lastRate + 0.1*(100/time.Since(lastHundred).Seconds())
-					height, maxPeerHeight := bcR.fsm.Status()
-					bcR.Logger.Info("Fast Sync Rate", "height", height,
-						"max_peer_height", maxPeerHeight, "blocks/s", lastRate)
-					lastHundred = time.Now()
-				}
-			}
-		}
-	}
-}
-
-// poolRoutine receives and handles messages from the Receive() routine and from the FSM.
-func (bcR *BlockchainReactor) poolRoutine() {
-
-	bcR.fsm.Start()
-
-	sendBlockRequestTicker := time.NewTicker(trySendIntervalMS * time.Millisecond)
-	statusUpdateTicker := time.NewTicker(statusUpdateIntervalSeconds * time.Second)
-
-	stopProcessing := make(chan struct{}, 1)
-	go bcR.processBlocksRoutine(stopProcessing)
-
-ForLoop:
-	for {
-		select {
-
-		case <-sendBlockRequestTicker.C:
-			if !bcR.fsm.NeedsBlocks() {
-				continue
-			}
-			_ = bcR.fsm.Handle(&bcReactorMessage{
-				event: makeRequestsEv,
-				data: bReactorEventData{
-					maxNumRequests: maxNumRequests}})
-
-		case <-statusUpdateTicker.C:
-			// Ask for status updates.
-			go bcR.sendStatusRequest()
-
-		case msg := <-bcR.messagesForFSMCh:
-			// Sent from the Receive() routine when status (statusResponseEv) and
-			// block (blockResponseEv) response events are received
-			_ = bcR.fsm.Handle(&msg)
-
-		case msg := <-bcR.errorsForFSMCh:
-			// Sent from the switch.RemovePeer() routine (RemovePeerEv) and
-			// FSM state timer expiry routine (stateTimeoutEv).
-			_ = bcR.fsm.Handle(&msg)
-
-		case msg := <-bcR.eventsFromFSMCh:
-			switch msg.event {
-			case syncFinishedEv:
-				stopProcessing <- struct{}{}
-				// Sent from the FSM when it enters finished state.
-				break ForLoop
-			case peerErrorEv:
-				// Sent from the FSM when it detects peer error
-				bcR.reportPeerErrorToSwitch(msg.data.err, msg.data.peerID)
-				if msg.data.err == errNoPeerResponse {
-					// Sent from the peer timeout handler routine
-					_ = bcR.fsm.Handle(&bcReactorMessage{
-						event: peerRemoveEv,
-						data: bReactorEventData{
-							peerID: msg.data.peerID,
-							err:    msg.data.err,
-						},
-					})
-				}
-				// else {
-				// For slow peers, or errors due to blocks received from wrong peer
-				// the FSM had already removed the peers
-				// }
-			default:
-				bcR.Logger.Error("Event from FSM not supported", "type", msg.event)
-			}
-
-		case <-bcR.Quit():
-			break ForLoop
-		}
-	}
-}
-
-func (bcR *BlockchainReactor) reportPeerErrorToSwitch(err error, peerID p2p.ID) {
-	peer := bcR.Switch.Peers().Get(peerID)
-	if peer != nil {
-		_ = bcR.swReporter.Report(behaviour.BadMessage(peerID, err.Error()))
-	}
-}
-
-func (bcR *BlockchainReactor) processBlock() error {
-
-	first, second, err := bcR.fsm.FirstTwoBlocks()
-	if err != nil {
-		// We need both to sync the first block.
-		return err
-	}
-
-	chainID := bcR.initialState.ChainID
-
-	firstParts := first.MakePartSet(types.BlockPartSizeBytes)
-	firstPartSetHeader := firstParts.Header()
-	firstID := types.BlockID{Hash: first.Hash(), PartSetHeader: firstPartSetHeader}
-	// Finally, verify the first block using the second's commit
-	// NOTE: we can probably make this more efficient, but note that calling
-	// first.Hash() doesn't verify the tx contents, so MakePartSet() is
-	// currently necessary.
-	err = bcR.state.Validators.VerifyCommitLight(chainID, firstID, first.Height, second.LastCommit)
-	if err != nil {
-		bcR.Logger.Error("error during commit verification", "err", err,
-			"first", first.Height, "second", second.Height)
-		return errBlockVerificationFailure
-	}
-
-	bcR.store.SaveBlock(first, firstParts, second.LastCommit)
-
-	bcR.state, _, err = bcR.blockExec.ApplyBlock(bcR.state, firstID, first)
-	if err != nil {
-		panic(fmt.Sprintf("failed to process committed block (%d:%X): %v", first.Height, first.Hash(), err))
-	}
-
-	return nil
-}
-
-// Implements bcRNotifier
-// sendStatusRequest broadcasts `BlockStore` height.
-func (bcR *BlockchainReactor) sendStatusRequest() {
-	msgBytes, err := bc.EncodeMsg(&bcproto.StatusRequest{})
-	if err != nil {
-		panic(err)
-	}
-	bcR.Switch.Broadcast(BlockchainChannel, msgBytes)
-}
-
-// Implements bcRNotifier
-// BlockRequest sends `BlockRequest` height.
-func (bcR *BlockchainReactor) sendBlockRequest(peerID p2p.ID, height int64) error {
-	peer := bcR.Switch.Peers().Get(peerID)
-	if peer == nil {
-		return errNilPeerForBlockRequest
-	}
-
-	msgBytes, err := bc.EncodeMsg(&bcproto.BlockRequest{Height: height})
-	if err != nil {
-		return err
-	}
-	queued := peer.TrySend(BlockchainChannel, msgBytes)
-	if !queued {
-		return errSendQueueFull
-	}
-	return nil
-}
-
-// Implements bcRNotifier
-func (bcR *BlockchainReactor) switchToConsensus() {
-	conR, ok := bcR.Switch.Reactor("CONSENSUS").(consensusReactor)
-	if ok {
-		conR.SwitchToConsensus(bcR.state, bcR.blocksSynced > 0 || bcR.stateSynced)
-		bcR.eventsFromFSMCh <- bcFsmMessage{event: syncFinishedEv}
-	}
-	// else {
-	// Should only happen during testing.
-	// }
-}
-
-// Implements bcRNotifier
-// Called by FSM and pool:
-// - pool calls when it detects slow peer or when peer times out
-// - FSM calls when:
-//    - adding a block (addBlock) fails
-//    - reactor processing of a block reports failure and FSM sends back the peers of first and second blocks
-func (bcR *BlockchainReactor) sendPeerError(err error, peerID p2p.ID) {
-	bcR.Logger.Info("sendPeerError:", "peer", peerID, "error", err)
-	msgData := bcFsmMessage{
-		event: peerErrorEv,
-		data: bFsmEventData{
-			peerID: peerID,
-			err:    err,
-		},
-	}
-	bcR.eventsFromFSMCh <- msgData
-}
-
-// Implements bcRNotifier
-func (bcR *BlockchainReactor) resetStateTimer(name string, timer **time.Timer, timeout time.Duration) {
-	if timer == nil {
-		panic("nil timer pointer parameter")
-	}
-	if *timer == nil {
-		*timer = time.AfterFunc(timeout, func() {
-			msg := bcReactorMessage{
-				event: stateTimeoutEv,
-				data: bReactorEventData{
-					stateName: name,
-				},
-			}
-			bcR.errorsForFSMCh <- msg
-		})
-	} else {
-		(*timer).Reset(timeout)
-	}
-}

blockchain/v1/reactor_fsm.go

@@ -1,462 +0,0 @@
-package v1
-
-import (
-	"errors"
-	"fmt"
-	"sync"
-	"time"
-
-	"github.com/tendermint/tendermint/libs/log"
-	"github.com/tendermint/tendermint/p2p"
-	"github.com/tendermint/tendermint/types"
-)
-
-// Blockchain Reactor State
-type bcReactorFSMState struct {
-	name string
-
-	// called when transitioning out of current state
-	handle func(*BcReactorFSM, bReactorEvent, bReactorEventData) (next *bcReactorFSMState, err error)
-	// called when entering the state
-	enter func(fsm *BcReactorFSM)
-
-	// timeout to ensure FSM is not stuck in a state forever
-	// the timer is owned and run by the fsm instance
-	timeout time.Duration
-}
-
-func (s *bcReactorFSMState) String() string {
-	return s.name
-}
-
-// BcReactorFSM is the datastructure for the Blockchain Reactor State Machine
-type BcReactorFSM struct {
-	logger log.Logger
-	mtx    sync.Mutex
-
-	startTime time.Time
-
-	state      *bcReactorFSMState
-	stateTimer *time.Timer
-	pool       *BlockPool
-
-	// interface used to call the Blockchain reactor to send StatusRequest, BlockRequest, reporting errors, etc.
-	toBcR bcReactor
-}
-
-// NewFSM creates a new reactor FSM.
-func NewFSM(height int64, toBcR bcReactor) *BcReactorFSM {
-	return &BcReactorFSM{
-		state:     unknown,
-		startTime: time.Now(),
-		pool:      NewBlockPool(height, toBcR),
-		toBcR:     toBcR,
-	}
-}
-
-// bReactorEventData is part of the message sent by the reactor to the FSM and used by the state handlers.
-type bReactorEventData struct {
-	peerID         p2p.ID
-	err            error        // for peer error: timeout, slow; for processed block event if error occurred
-	base           int64        // for status response
-	height         int64        // for status response; for processed block event
-	block          *types.Block // for block response
-	stateName      string       // for state timeout events
-	length         int          // for block response event, length of received block, used to detect slow peers
-	maxNumRequests int          // for request needed event, maximum number of pending requests
-}
-
-// Blockchain Reactor Events (the input to the state machine)
-type bReactorEvent uint
-
-const (
-	// message type events
-	startFSMEv = iota + 1
-	statusResponseEv
-	blockResponseEv
-	noBlockResponseEv
-	processedBlockEv
-	makeRequestsEv
-	stopFSMEv
-
-	// other events
-	peerRemoveEv = iota + 256
-	stateTimeoutEv
-)
-
-func (msg *bcReactorMessage) String() string {
-	var dataStr string
-
-	switch msg.event {
-	case startFSMEv:
-		dataStr = ""
-	case statusResponseEv:
-		dataStr = fmt.Sprintf("peer=%v base=%v height=%v", msg.data.peerID, msg.data.base, msg.data.height)
-	case blockResponseEv:
-		dataStr = fmt.Sprintf("peer=%v block.height=%v length=%v",
-			msg.data.peerID, msg.data.block.Height, msg.data.length)
-	case noBlockResponseEv:
-		dataStr = fmt.Sprintf("peer=%v requested height=%v",
-			msg.data.peerID, msg.data.height)
-	case processedBlockEv:
-		dataStr = fmt.Sprintf("error=%v", msg.data.err)
-	case makeRequestsEv:
-		dataStr = ""
-	case stopFSMEv:
-		dataStr = ""
-	case peerRemoveEv:
-		dataStr = fmt.Sprintf("peer: %v is being removed by the switch", msg.data.peerID)
-	case stateTimeoutEv:
-		dataStr = fmt.Sprintf("state=%v", msg.data.stateName)
-	default:
-		dataStr = "cannot interpret message data"
-	}
-
-	return fmt.Sprintf("%v: %v", msg.event, dataStr)
-}
-
-func (ev bReactorEvent) String() string {
-	switch ev {
-	case startFSMEv:
-		return "startFSMEv"
-	case statusResponseEv:
-		return "statusResponseEv"
-	case blockResponseEv:
-		return "blockResponseEv"
-	case noBlockResponseEv:
-		return "noBlockResponseEv"
-	case processedBlockEv:
-		return "processedBlockEv"
-	case makeRequestsEv:
-		return "makeRequestsEv"
-	case stopFSMEv:
-		return "stopFSMEv"
-	case peerRemoveEv:
-		return "peerRemoveEv"
-	case stateTimeoutEv:
-		return "stateTimeoutEv"
-	default:
-		return "event unknown"
-	}
-
-}
-
-// states
-var (
-	unknown      *bcReactorFSMState
-	waitForPeer  *bcReactorFSMState
-	waitForBlock *bcReactorFSMState
-	finished     *bcReactorFSMState
-)
-
-// timeouts for state timers
-const (
-	waitForPeerTimeout                 = 3 * time.Second
-	waitForBlockAtCurrentHeightTimeout = 10 * time.Second
-)
-
-// errors
-var (
-	// internal to the package
-	errNoErrorFinished        = errors.New("fast sync is finished")
-	errInvalidEvent           = errors.New("invalid event in current state")
-	errMissingBlock           = errors.New("missing blocks")
-	errNilPeerForBlockRequest = errors.New("peer for block request does not exist in the switch")
-	errSendQueueFull          = errors.New("block request not made, send-queue is full")
-	errPeerTooShort           = errors.New("peer height too low, old peer removed/ new peer not added")
-	errSwitchRemovesPeer      = errors.New("switch is removing peer")
-	errTimeoutEventWrongState = errors.New("timeout event for a state different than the current one")
-	errNoTallerPeer           = errors.New("fast sync timed out on waiting for a peer taller than this node")
-
-	// reported eventually to the switch
-	// handle return
-	errPeerLowersItsHeight = errors.New("fast sync peer reports a height lower than previous")
-	// handle return
-	errNoPeerResponseForCurrentHeights = errors.New("fast sync timed out on peer block response for current heights")
-	errNoPeerResponse                  = errors.New("fast sync timed out on peer block response")               // xx
-	errBadDataFromPeer                 = errors.New("fast sync received block from wrong peer or block is bad") // xx
-	errDuplicateBlock                  = errors.New("fast sync received duplicate block from peer")
-	errBlockVerificationFailure        = errors.New("fast sync block verification failure")              // xx
-	errSlowPeer                        = errors.New("fast sync peer is not sending us data fast enough") // xx
-
-)
-
-func init() {
-	unknown = &bcReactorFSMState{
-		name: "unknown",
-		handle: func(fsm *BcReactorFSM, ev bReactorEvent, data bReactorEventData) (*bcReactorFSMState, error) {
-			switch ev {
-			case startFSMEv:
-				// Broadcast Status message. Currently doesn't return non-nil error.
-				fsm.toBcR.sendStatusRequest()
-				return waitForPeer, nil
-
-			case stopFSMEv:
-				return finished, errNoErrorFinished
-
-			default:
-				return unknown, errInvalidEvent
-			}
-		},
-	}
-
-	waitForPeer = &bcReactorFSMState{
-		name:    "waitForPeer",
-		timeout: waitForPeerTimeout,
-		enter: func(fsm *BcReactorFSM) {
-			// Stop when leaving the state.
-			fsm.resetStateTimer()
-		},
-		handle: func(fsm *BcReactorFSM, ev bReactorEvent, data bReactorEventData) (*bcReactorFSMState, error) {
-			switch ev {
-			case stateTimeoutEv:
-				if data.stateName != "waitForPeer" {
-					fsm.logger.Error("received a state timeout event for different state",
-						"state", data.stateName)
-					return waitForPeer, errTimeoutEventWrongState
-				}
-				// There was no statusResponse received from any peer.
-				// Should we send status request again?
-				return finished, errNoTallerPeer
-
-			case statusResponseEv:
-				if err := fsm.pool.UpdatePeer(data.peerID, data.base, data.height); err != nil {
-					if fsm.pool.NumPeers() == 0 {
-						return waitForPeer, err
-					}
-				}
-				if fsm.stateTimer != nil {
-					fsm.stateTimer.Stop()
-				}
-				return waitForBlock, nil
-
-			case stopFSMEv:
-				if fsm.stateTimer != nil {
-					fsm.stateTimer.Stop()
-				}
-				return finished, errNoErrorFinished
-
-			default:
-				return waitForPeer, errInvalidEvent
-			}
-		},
-	}
-
-	waitForBlock = &bcReactorFSMState{
-		name:    "waitForBlock",
-		timeout: waitForBlockAtCurrentHeightTimeout,
-		enter: func(fsm *BcReactorFSM) {
-			// Stop when leaving the state.
-			fsm.resetStateTimer()
-		},
-		handle: func(fsm *BcReactorFSM, ev bReactorEvent, data bReactorEventData) (*bcReactorFSMState, error) {
-			switch ev {
-
-			case statusResponseEv:
-				err := fsm.pool.UpdatePeer(data.peerID, data.base, data.height)
-				if fsm.pool.NumPeers() == 0 {
-					return waitForPeer, err
-				}
-				if fsm.pool.ReachedMaxHeight() {
-					return finished, err
-				}
-				return waitForBlock, err
-
-			case blockResponseEv:
-				fsm.logger.Debug("blockResponseEv", "H", data.block.Height)
-				err := fsm.pool.AddBlock(data.peerID, data.block, data.length)
-				if err != nil {
-					// A block was received that was unsolicited, from unexpected peer, or that we already have it.
-					// Ignore block, remove peer and send error to switch.
-					fsm.pool.RemovePeer(data.peerID, err)
-					fsm.toBcR.sendPeerError(err, data.peerID)
-				}
-				if fsm.pool.NumPeers() == 0 {
-					return waitForPeer, err
-				}
-				return waitForBlock, err
-			case noBlockResponseEv:
-				fsm.logger.Error("peer does not have requested block", "peer", data.peerID)
-
-				return waitForBlock, nil
-			case processedBlockEv:
-				if data.err != nil {
-					first, second, _ := fsm.pool.FirstTwoBlocksAndPeers()
-					fsm.logger.Error("error processing block", "err", data.err,
-						"first", first.block.Height, "second", second.block.Height)
-					fsm.logger.Error("send peer error for", "peer", first.peer.ID)
-					fsm.toBcR.sendPeerError(data.err, first.peer.ID)
-					fsm.logger.Error("send peer error for", "peer", second.peer.ID)
-					fsm.toBcR.sendPeerError(data.err, second.peer.ID)
-					// Remove the first two blocks. This will also remove the peers
-					fsm.pool.InvalidateFirstTwoBlocks(data.err)
-				} else {
-					fsm.pool.ProcessedCurrentHeightBlock()
-					// Since we advanced one block reset the state timer
-					fsm.resetStateTimer()
-				}
-
-				// Both cases above may result in achieving maximum height.
-				if fsm.pool.ReachedMaxHeight() {
-					return finished, nil
-				}
-
-				return waitForBlock, data.err
-
-			case peerRemoveEv:
-				// This event is sent by the switch to remove disconnected and errored peers.
-				fsm.pool.RemovePeer(data.peerID, data.err)
-				if fsm.pool.NumPeers() == 0 {
-					return waitForPeer, nil
-				}
-				if fsm.pool.ReachedMaxHeight() {
-					return finished, nil
-				}
-				return waitForBlock, nil
-
-			case makeRequestsEv:
-				fsm.makeNextRequests(data.maxNumRequests)
-				return waitForBlock, nil
-
-			case stateTimeoutEv:
-				if data.stateName != "waitForBlock" {
-					fsm.logger.Error("received a state timeout event for different state",
-						"state", data.stateName)
-					return waitForBlock, errTimeoutEventWrongState
-				}
-				// We haven't received the block at current height or height+1. Remove peer.
-				fsm.pool.RemovePeerAtCurrentHeights(errNoPeerResponseForCurrentHeights)
-				fsm.resetStateTimer()
-				if fsm.pool.NumPeers() == 0 {
-					return waitForPeer, errNoPeerResponseForCurrentHeights
-				}
-				if fsm.pool.ReachedMaxHeight() {
-					return finished, nil
-				}
-				return waitForBlock, errNoPeerResponseForCurrentHeights
-
-			case stopFSMEv:
-				if fsm.stateTimer != nil {
-					fsm.stateTimer.Stop()
-				}
-				return finished, errNoErrorFinished
-
-			default:
-				return waitForBlock, errInvalidEvent
-			}
-		},
-	}
-
-	finished = &bcReactorFSMState{
-		name: "finished",
-		enter: func(fsm *BcReactorFSM) {
-			fsm.logger.Info("Time to switch to consensus reactor!", "height", fsm.pool.Height)
-			fsm.toBcR.switchToConsensus()
-			fsm.cleanup()
-		},
-		handle: func(fsm *BcReactorFSM, ev bReactorEvent, data bReactorEventData) (*bcReactorFSMState, error) {
-			return finished, nil
-		},
-	}
-}
-
-// Interface used by FSM for sending Block and Status requests,
-// informing of peer errors and state timeouts
-// Implemented by BlockchainReactor and tests
-type bcReactor interface {
-	sendStatusRequest()
-	sendBlockRequest(peerID p2p.ID, height int64) error
-	sendPeerError(err error, peerID p2p.ID)
-	resetStateTimer(name string, timer **time.Timer, timeout time.Duration)
-	switchToConsensus()
-}
-
-// SetLogger sets the FSM logger.
-func (fsm *BcReactorFSM) SetLogger(l log.Logger) {
-	fsm.logger = l
-	fsm.pool.SetLogger(l)
-}
-
-// Start starts the FSM.
-func (fsm *BcReactorFSM) Start() {
-	_ = fsm.Handle(&bcReactorMessage{event: startFSMEv})
-}
-
-// Handle processes messages and events sent to the FSM.
-func (fsm *BcReactorFSM) Handle(msg *bcReactorMessage) error {
-	fsm.mtx.Lock()
-	defer fsm.mtx.Unlock()
-	fsm.logger.Debug("FSM received", "event", msg, "state", fsm.state)
-
-	if fsm.state == nil {
-		fsm.state = unknown
-	}
-	next, err := fsm.state.handle(fsm, msg.event, msg.data)
-	if err != nil {
-		fsm.logger.Error("FSM event handler returned", "err", err,
-			"state", fsm.state, "event", msg.event)
-	}
-
-	oldState := fsm.state.name
-	fsm.transition(next)
-	if oldState != fsm.state.name {
-		fsm.logger.Info("FSM changed state", "new_state", fsm.state)
-	}
-	return err
-}
-
-func (fsm *BcReactorFSM) transition(next *bcReactorFSMState) {
-	if next == nil {
-		return
-	}
-	if fsm.state != next {
-		fsm.state = next
-		if next.enter != nil {
-			next.enter(fsm)
-		}
-	}
-}
-
-// Called when entering an FSM state in order to detect lack of progress in the state machine.
-// Note the use of the 'bcr' interface to facilitate testing without timer expiring.
-func (fsm *BcReactorFSM) resetStateTimer() {
-	fsm.toBcR.resetStateTimer(fsm.state.name, &fsm.stateTimer, fsm.state.timeout)
-}
-
-func (fsm *BcReactorFSM) isCaughtUp() bool {
-	return fsm.state == finished
-}
-
-func (fsm *BcReactorFSM) makeNextRequests(maxNumRequests int) {
-	fsm.pool.MakeNextRequests(maxNumRequests)
-}
-
-func (fsm *BcReactorFSM) cleanup() {
-	fsm.pool.Cleanup()
-}
-
-// NeedsBlocks checks if more block requests are required.
-func (fsm *BcReactorFSM) NeedsBlocks() bool {
-	fsm.mtx.Lock()
-	defer fsm.mtx.Unlock()
-	return fsm.state.name == "waitForBlock" && fsm.pool.NeedsBlocks()
-}
-
-// FirstTwoBlocks returns the two blocks at pool height and height+1
-func (fsm *BcReactorFSM) FirstTwoBlocks() (first, second *types.Block, err error) {
-	fsm.mtx.Lock()
-	defer fsm.mtx.Unlock()
-	firstBP, secondBP, err := fsm.pool.FirstTwoBlocksAndPeers()
-	if err == nil {
-		first = firstBP.block
-		second = secondBP.block
-	}
-	return
-}
-
-// Status returns the pool's height and the maximum peer height.
-func (fsm *BcReactorFSM) Status() (height, maxPeerHeight int64) {
-	fsm.mtx.Lock()
-	defer fsm.mtx.Unlock()
-	return fsm.pool.Height, fsm.pool.MaxPeerHeight
-}

blockchain/v1/reactor_fsm_test.go

@@ -1,944 +0,0 @@
-package v1
-
-import (
-	"fmt"
-	"testing"
-	"time"
-
-	"github.com/stretchr/testify/assert"
-
-	"github.com/tendermint/tendermint/libs/log"
-	tmmath "github.com/tendermint/tendermint/libs/math"
-	tmrand "github.com/tendermint/tendermint/libs/rand"
-	"github.com/tendermint/tendermint/p2p"
-	"github.com/tendermint/tendermint/types"
-)
-
-type lastBlockRequestT struct {
-	peerID p2p.ID
-	height int64
-}
-
-type lastPeerErrorT struct {
-	peerID p2p.ID
-	err    error
-}
-
-// reactor for FSM testing
-type testReactor struct {
-	logger            log.Logger
-	fsm               *BcReactorFSM
-	numStatusRequests int
-	numBlockRequests  int
-	lastBlockRequest  lastBlockRequestT
-	lastPeerError     lastPeerErrorT
-	stateTimerStarts  map[string]int
-}
-
-func sendEventToFSM(fsm *BcReactorFSM, ev bReactorEvent, data bReactorEventData) error {
-	return fsm.Handle(&bcReactorMessage{event: ev, data: data})
-}
-
-type fsmStepTestValues struct {
-	currentState string
-	event        bReactorEvent
-	data         bReactorEventData
-
-	wantErr           error
-	wantState         string
-	wantStatusReqSent bool
-	wantReqIncreased  bool
-	wantNewBlocks     []int64
-	wantRemovedPeers  []p2p.ID
-}
-
-// ---------------------------------------------------------------------------
-// helper test function for different FSM events, state and expected behavior
-func sStopFSMEv(current, expected string) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState: current,
-		event:        stopFSMEv,
-		wantState:    expected,
-		wantErr:      errNoErrorFinished}
-}
-
-func sUnknownFSMEv(current string) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState: current,
-		event:        1234,
-		wantState:    current,
-		wantErr:      errInvalidEvent}
-}
-
-func sStartFSMEv() fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState:      "unknown",
-		event:             startFSMEv,
-		wantState:         "waitForPeer",
-		wantStatusReqSent: true}
-}
-
-func sStateTimeoutEv(current, expected string, timedoutState string, wantErr error) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState: current,
-		event:        stateTimeoutEv,
-		data: bReactorEventData{
-			stateName: timedoutState,
-		},
-		wantState: expected,
-		wantErr:   wantErr,
-	}
-}
-
-func sProcessedBlockEv(current, expected string, reactorError error) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState: current,
-		event:        processedBlockEv,
-		data: bReactorEventData{
-			err: reactorError,
-		},
-		wantState: expected,
-		wantErr:   reactorError,
-	}
-}
-
-func sStatusEv(current, expected string, peerID p2p.ID, height int64, err error) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState: current,
-		event:        statusResponseEv,
-		data:         bReactorEventData{peerID: peerID, height: height},
-		wantState:    expected,
-		wantErr:      err}
-}
-
-func sMakeRequestsEv(current, expected string, maxPendingRequests int) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState:     current,
-		event:            makeRequestsEv,
-		data:             bReactorEventData{maxNumRequests: maxPendingRequests},
-		wantState:        expected,
-		wantReqIncreased: true,
-	}
-}
-
-func sMakeRequestsEvErrored(current, expected string,
-	maxPendingRequests int, err error, peersRemoved []p2p.ID) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState:     current,
-		event:            makeRequestsEv,
-		data:             bReactorEventData{maxNumRequests: maxPendingRequests},
-		wantState:        expected,
-		wantErr:          err,
-		wantRemovedPeers: peersRemoved,
-		wantReqIncreased: true,
-	}
-}
-
-func sBlockRespEv(current, expected string, peerID p2p.ID, height int64, prevBlocks []int64) fsmStepTestValues {
-	txs := []types.Tx{types.Tx("foo"), types.Tx("bar")}
-	return fsmStepTestValues{
-		currentState: current,
-		event:        blockResponseEv,
-		data: bReactorEventData{
-			peerID: peerID,
-			height: height,
-			block:  types.MakeBlock(height, txs, nil, nil),
-			length: 100},
-		wantState:     expected,
-		wantNewBlocks: append(prevBlocks, height),
-	}
-}
-
-func sBlockRespEvErrored(current, expected string,
-	peerID p2p.ID, height int64, prevBlocks []int64, wantErr error, peersRemoved []p2p.ID) fsmStepTestValues {
-	txs := []types.Tx{types.Tx("foo"), types.Tx("bar")}
-
-	return fsmStepTestValues{
-		currentState: current,
-		event:        blockResponseEv,
-		data: bReactorEventData{
-			peerID: peerID,
-			height: height,
-			block:  types.MakeBlock(height, txs, nil, nil),
-			length: 100},
-		wantState:        expected,
-		wantErr:          wantErr,
-		wantRemovedPeers: peersRemoved,
-		wantNewBlocks:    prevBlocks,
-	}
-}
-
-func sPeerRemoveEv(current, expected string, peerID p2p.ID, err error, peersRemoved []p2p.ID) fsmStepTestValues {
-	return fsmStepTestValues{
-		currentState: current,
-		event:        peerRemoveEv,
-		data: bReactorEventData{
-			peerID: peerID,
-			err:    err,
-		},
-		wantState:        expected,
-		wantRemovedPeers: peersRemoved,
-	}
-}
-
-// --------------------------------------------
-
-func newTestReactor(height int64) *testReactor {
-	testBcR := &testReactor{logger: log.TestingLogger(), stateTimerStarts: make(map[string]int)}
-	testBcR.fsm = NewFSM(height, testBcR)
-	testBcR.fsm.SetLogger(testBcR.logger)
-	return testBcR
-}
-
-func fixBlockResponseEvStep(step *fsmStepTestValues, testBcR *testReactor) {
-	// There is currently no good way to know to which peer a block request was sent.
-	// So in some cases where it does not matter, before we simulate a block response
-	// we cheat and look where it is expected from.
-	if step.event == blockResponseEv {
-		height := step.data.height
-		peerID, ok := testBcR.fsm.pool.blocks[height]
-		if ok {
-			step.data.peerID = peerID
-		}
-	}
-}
-
-type testFields struct {
-	name               string
-	startingHeight     int64
-	maxRequestsPerPeer int
-	maxPendingRequests int
-	steps              []fsmStepTestValues
-}
-
-func executeFSMTests(t *testing.T, tests []testFields, matchRespToReq bool) {
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			// Create test reactor
-			testBcR := newTestReactor(tt.startingHeight)
-
-			if tt.maxRequestsPerPeer != 0 {
-				maxRequestsPerPeer = tt.maxRequestsPerPeer
-			}
-
-			for _, step := range tt.steps {
-				step := step
-				assert.Equal(t, step.currentState, testBcR.fsm.state.name)
-
-				var heightBefore int64
-				if step.event == processedBlockEv && step.data.err == errBlockVerificationFailure {
-					heightBefore = testBcR.fsm.pool.Height
-				}
-				oldNumStatusRequests := testBcR.numStatusRequests
-				oldNumBlockRequests := testBcR.numBlockRequests
-				if matchRespToReq {
-					fixBlockResponseEvStep(&step, testBcR)
-				}
-
-				fsmErr := sendEventToFSM(testBcR.fsm, step.event, step.data)
-				assert.Equal(t, step.wantErr, fsmErr)
-
-				if step.wantStatusReqSent {
-					assert.Equal(t, oldNumStatusRequests+1, testBcR.numStatusRequests)
-				} else {
-					assert.Equal(t, oldNumStatusRequests, testBcR.numStatusRequests)
-				}
-
-				if step.wantReqIncreased {
-					assert.True(t, oldNumBlockRequests < testBcR.numBlockRequests)
-				} else {
-					assert.Equal(t, oldNumBlockRequests, testBcR.numBlockRequests)
-				}
-
-				for _, height := range step.wantNewBlocks {
-					_, err := testBcR.fsm.pool.BlockAndPeerAtHeight(height)
-					assert.Nil(t, err)
-				}
-				if step.event == processedBlockEv && step.data.err == errBlockVerificationFailure {
-					heightAfter := testBcR.fsm.pool.Height
-					assert.Equal(t, heightBefore, heightAfter)
-					firstAfter, err1 := testBcR.fsm.pool.BlockAndPeerAtHeight(testBcR.fsm.pool.Height)
-					secondAfter, err2 := testBcR.fsm.pool.BlockAndPeerAtHeight(testBcR.fsm.pool.Height + 1)
-					assert.NotNil(t, err1)
-					assert.NotNil(t, err2)
-					assert.Nil(t, firstAfter)
-					assert.Nil(t, secondAfter)
-				}
-
-				assert.Equal(t, step.wantState, testBcR.fsm.state.name)
-
-				if step.wantState == "finished" {
-					assert.True(t, testBcR.fsm.isCaughtUp())
-				}
-			}
-		})
-	}
-}
-
-func TestFSMBasic(t *testing.T) {
-	tests := []testFields{
-		{
-			name:               "one block, one peer - TS2",
-			startingHeight:     1,
-			maxRequestsPerPeer: 2,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 2, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 1, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 2, []int64{1}),
-				sProcessedBlockEv("waitForBlock", "finished", nil),
-			},
-		},
-		{
-			name:               "multi block, multi peer - TS2",
-			startingHeight:     1,
-			maxRequestsPerPeer: 2,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 4, nil),
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 4, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 1, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 2, []int64{1}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 3, []int64{1, 2}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 4, []int64{1, 2, 3}),
-
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-				sProcessedBlockEv("waitForBlock", "finished", nil),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, true)
-}
-
-func TestFSMBlockVerificationFailure(t *testing.T) {
-	tests := []testFields{
-		{
-			name:               "block verification failure - TS2 variant",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-
-				// add P1 and get blocks 1-3 from it
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 1, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 2, []int64{1}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 3, []int64{1, 2}),
-
-				// add P2
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 3, nil),
-
-				// process block failure, should remove P1 and all blocks
-				sProcessedBlockEv("waitForBlock", "waitForBlock", errBlockVerificationFailure),
-
-				// get blocks 1-3 from P2
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 1, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 2, []int64{1}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 3, []int64{1, 2}),
-
-				// finish after processing blocks 1 and 2
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-				sProcessedBlockEv("waitForBlock", "finished", nil),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, false)
-}
-
-func TestFSMBadBlockFromPeer(t *testing.T) {
-	tests := []testFields{
-		{
-			name:               "block we haven't asked for",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1 and ask for blocks 1-3
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 300, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-
-				// blockResponseEv for height 100 should cause an error
-				sBlockRespEvErrored("waitForBlock", "waitForPeer",
-					"P1", 100, []int64{}, errMissingBlock, []p2p.ID{}),
-			},
-		},
-		{
-			name:               "block we already have",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1 and get block 1
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 100, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sBlockRespEv("waitForBlock", "waitForBlock",
-					"P1", 1, []int64{}),
-
-				// Get block 1 again. Since peer is removed together with block 1,
-				// the blocks present in the pool should be {}
-				sBlockRespEvErrored("waitForBlock", "waitForPeer",
-					"P1", 1, []int64{}, errDuplicateBlock, []p2p.ID{"P1"}),
-			},
-		},
-		{
-			name:               "block from unknown peer",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1 and get block 1
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-
-				// get block 1 from unknown peer P2
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sBlockRespEvErrored("waitForBlock", "waitForBlock",
-					"P2", 1, []int64{}, errBadDataFromPeer, []p2p.ID{"P2"}),
-			},
-		},
-		{
-			name:               "block from wrong peer",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1, make requests for blocks 1-3 to P1
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-
-				// add P2
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 3, nil),
-
-				// receive block 1 from P2
-				sBlockRespEvErrored("waitForBlock", "waitForBlock",
-					"P2", 1, []int64{}, errBadDataFromPeer, []p2p.ID{"P2"}),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, false)
-}
-
-func TestFSMBlockAtCurrentHeightDoesNotArriveInTime(t *testing.T) {
-	tests := []testFields{
-		{
-			name:               "block at current height undelivered - TS5",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1, get blocks 1 and 2, process block 1
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sBlockRespEv("waitForBlock", "waitForBlock",
-					"P1", 1, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock",
-					"P1", 2, []int64{1}),
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-
-				// add P2
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 3, nil),
-
-				// timeout on block 3, P1 should be removed
-				sStateTimeoutEv("waitForBlock", "waitForBlock", "waitForBlock", errNoPeerResponseForCurrentHeights),
-
-				// make requests and finish by receiving blocks 2 and 3 from P2
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 2, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P2", 3, []int64{2}),
-				sProcessedBlockEv("waitForBlock", "finished", nil),
-			},
-		},
-		{
-			name:               "block at current height undelivered, at maxPeerHeight after peer removal - TS3",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1, request blocks 1-3 from P1
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-
-				// add P2 (tallest)
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 30, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-
-				// receive blocks 1-3 from P1
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 1, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 2, []int64{1}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 3, []int64{1, 2}),
-
-				// process blocks at heights 1 and 2
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-
-				// timeout on block at height 4
-				sStateTimeoutEv("waitForBlock", "finished", "waitForBlock", nil),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, true)
-}
-
-func TestFSMPeerRelatedEvents(t *testing.T) {
-	tests := []testFields{
-		{
-			name:           "peer remove event with no blocks",
-			startingHeight: 1,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1, P2, P3
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 3, nil),
-				sStatusEv("waitForBlock", "waitForBlock", "P3", 3, nil),
-
-				// switch removes P2
-				sPeerRemoveEv("waitForBlock", "waitForBlock", "P2", errSwitchRemovesPeer, []p2p.ID{"P2"}),
-			},
-		},
-		{
-			name:           "only peer removed while in waitForBlock state",
-			startingHeight: 100,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 200, nil),
-
-				// switch removes P1
-				sPeerRemoveEv("waitForBlock", "waitForPeer", "P1", errSwitchRemovesPeer, []p2p.ID{"P1"}),
-			},
-		},
-		{
-			name:               "highest peer removed while in waitForBlock state, node reaches maxPeerHeight - TS4 ",
-			startingHeight:     100,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1 and make requests
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 101, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				// add P2
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 200, nil),
-
-				// get blocks 100 and 101 from P1 and process block at height 100
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 100, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 101, []int64{100}),
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-
-				// switch removes peer P1, should be finished
-				sPeerRemoveEv("waitForBlock", "finished", "P2", errSwitchRemovesPeer, []p2p.ID{"P2"}),
-			},
-		},
-		{
-			name:               "highest peer lowers its height in waitForBlock state, node reaches maxPeerHeight - TS4",
-			startingHeight:     100,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1 and make requests
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 101, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-
-				// add P2
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 200, nil),
-
-				// get blocks 100 and 101 from P1
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 100, []int64{}),
-				sBlockRespEv("waitForBlock", "waitForBlock", "P1", 101, []int64{100}),
-
-				// processed block at heights 100
-				sProcessedBlockEv("waitForBlock", "waitForBlock", nil),
-
-				// P2 becomes short
-				sStatusEv("waitForBlock", "finished", "P2", 100, errPeerLowersItsHeight),
-			},
-		},
-		{
-			name:           "new short peer while in waitForPeer state",
-			startingHeight: 100,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForPeer", "P1", 3, errPeerTooShort),
-			},
-		},
-		{
-			name:           "new short peer while in waitForBlock state",
-			startingHeight: 100,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 200, nil),
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 3, errPeerTooShort),
-			},
-		},
-		{
-			name:           "only peer updated with low height while in waitForBlock state",
-			startingHeight: 100,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 200, nil),
-				sStatusEv("waitForBlock", "waitForPeer", "P1", 3, errPeerLowersItsHeight),
-			},
-		},
-		{
-			name:               "peer does not exist in the switch",
-			startingHeight:     9999999,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				// add P1
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 20000000, nil),
-				// send request for block 9999999
-				// Note: For this block request the "switch missing the peer" error is simulated,
-				// see implementation of bcReactor interface, sendBlockRequest(), in this file.
-				sMakeRequestsEvErrored("waitForBlock", "waitForBlock",
-					maxNumRequests, nil, []p2p.ID{"P1"}),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, true)
-}
-
-func TestFSMStopFSM(t *testing.T) {
-	tests := []testFields{
-		{
-			name: "stopFSMEv in unknown",
-			steps: []fsmStepTestValues{
-				sStopFSMEv("unknown", "finished"),
-			},
-		},
-		{
-			name:           "stopFSMEv in waitForPeer",
-			startingHeight: 1,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStopFSMEv("waitForPeer", "finished"),
-			},
-		},
-		{
-			name:           "stopFSMEv in waitForBlock",
-			startingHeight: 1,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sStopFSMEv("waitForBlock", "finished"),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, false)
-}
-
-func TestFSMUnknownElements(t *testing.T) {
-	tests := []testFields{
-		{
-			name: "unknown event for state unknown",
-			steps: []fsmStepTestValues{
-				sUnknownFSMEv("unknown"),
-			},
-		},
-		{
-			name: "unknown event for state waitForPeer",
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sUnknownFSMEv("waitForPeer"),
-			},
-		},
-		{
-			name:           "unknown event for state waitForBlock",
-			startingHeight: 1,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sUnknownFSMEv("waitForBlock"),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, false)
-}
-
-func TestFSMPeerStateTimeoutEvent(t *testing.T) {
-	tests := []testFields{
-		{
-			name:               "timeout event for state waitForPeer while in state waitForPeer - TS1",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStateTimeoutEv("waitForPeer", "finished", "waitForPeer", errNoTallerPeer),
-			},
-		},
-		{
-			name:               "timeout event for state waitForPeer while in a state != waitForPeer",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStateTimeoutEv("waitForPeer", "waitForPeer", "waitForBlock", errTimeoutEventWrongState),
-			},
-		},
-		{
-			name:               "timeout event for state waitForBlock while in state waitForBlock ",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sStateTimeoutEv("waitForBlock", "waitForPeer", "waitForBlock", errNoPeerResponseForCurrentHeights),
-			},
-		},
-		{
-			name:               "timeout event for state waitForBlock while in a state != waitForBlock",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sStateTimeoutEv("waitForBlock", "waitForBlock", "waitForPeer", errTimeoutEventWrongState),
-			},
-		},
-		{
-			name:               "timeout event for state waitForBlock with multiple peers",
-			startingHeight:     1,
-			maxRequestsPerPeer: 3,
-			steps: []fsmStepTestValues{
-				sStartFSMEv(),
-				sStatusEv("waitForPeer", "waitForBlock", "P1", 3, nil),
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-				sStatusEv("waitForBlock", "waitForBlock", "P2", 3, nil),
-				sStateTimeoutEv("waitForBlock", "waitForBlock", "waitForBlock", errNoPeerResponseForCurrentHeights),
-			},
-		},
-	}
-
-	executeFSMTests(t, tests, false)
-}
-
-func makeCorrectTransitionSequence(startingHeight int64, numBlocks int64, numPeers int, randomPeerHeights bool,
-	maxRequestsPerPeer int, maxPendingRequests int) testFields {
-
-	// Generate numPeers peers with random or numBlocks heights according to the randomPeerHeights flag.
-	peerHeights := make([]int64, numPeers)
-	for i := 0; i < numPeers; i++ {
-		if i == 0 {
-			peerHeights[0] = numBlocks
-			continue
-		}
-		if randomPeerHeights {
-			peerHeights[i] = int64(tmmath.MaxInt(tmrand.Intn(int(numBlocks)), int(startingHeight)+1))
-		} else {
-			peerHeights[i] = numBlocks
-		}
-	}
-
-	// Approximate the slice capacity to save time for appends.
-	testSteps := make([]fsmStepTestValues, 0, 3*numBlocks+int64(numPeers))
-
-	testName := fmt.Sprintf("%v-blocks %v-startingHeight %v-peers %v-maxRequestsPerPeer %v-maxNumRequests",
-		numBlocks, startingHeight, numPeers, maxRequestsPerPeer, maxPendingRequests)
-
-	// Add startFSMEv step.
-	testSteps = append(testSteps, sStartFSMEv())
-
-	// For each peer, add statusResponseEv step.
-	for i := 0; i < numPeers; i++ {
-		peerName := fmt.Sprintf("P%d", i)
-		if i == 0 {
-			testSteps = append(
-				testSteps,
-				sStatusEv("waitForPeer", "waitForBlock", p2p.ID(peerName), peerHeights[i], nil))
-		} else {
-			testSteps = append(testSteps,
-				sStatusEv("waitForBlock", "waitForBlock", p2p.ID(peerName), peerHeights[i], nil))
-		}
-	}
-
-	height := startingHeight
-	numBlocksReceived := 0
-	prevBlocks := make([]int64, 0, maxPendingRequests)
-
-forLoop:
-	for i := 0; i < int(numBlocks); i++ {
-
-		// Add the makeRequestEv step periodically.
-		if i%maxRequestsPerPeer == 0 {
-			testSteps = append(
-				testSteps,
-				sMakeRequestsEv("waitForBlock", "waitForBlock", maxNumRequests),
-			)
-		}
-
-		// Add the blockRespEv step
-		testSteps = append(
-			testSteps,
-			sBlockRespEv("waitForBlock", "waitForBlock",
-				"P0", height, prevBlocks))
-		prevBlocks = append(prevBlocks, height)
-		height++
-		numBlocksReceived++
-
-		// Add the processedBlockEv step periodically.
-		if numBlocksReceived >= maxRequestsPerPeer || height >= numBlocks {
-			for j := int(height) - numBlocksReceived; j < int(height); j++ {
-				if j >= int(numBlocks) {
-					// This is the last block that is processed, we should be in "finished" state.
-					testSteps = append(
-						testSteps,
-						sProcessedBlockEv("waitForBlock", "finished", nil))
-					break forLoop
-				}
-				testSteps = append(
-					testSteps,
-					sProcessedBlockEv("waitForBlock", "waitForBlock", nil))
-			}
-			numBlocksReceived = 0
-			prevBlocks = make([]int64, 0, maxPendingRequests)
-		}
-	}
-
-	return testFields{
-		name:               testName,
-		startingHeight:     startingHeight,
-		maxRequestsPerPeer: maxRequestsPerPeer,
-		maxPendingRequests: maxPendingRequests,
-		steps:              testSteps,
-	}
-}
-
-const (
-	maxStartingHeightTest       = 100
-	maxRequestsPerPeerTest      = 20
-	maxTotalPendingRequestsTest = 600
-	maxNumPeersTest             = 1000
-	maxNumBlocksInChainTest     = 10000 // should be smaller than 9999999
-)
-
-func makeCorrectTransitionSequenceWithRandomParameters() testFields {
-	// Generate a starting height for fast sync.
-	startingHeight := int64(tmrand.Intn(maxStartingHeightTest) + 1)
-
-	// Generate the number of requests per peer.
-	maxRequestsPerPeer := tmrand.Intn(maxRequestsPerPeerTest) + 1
-
-	// Generate the maximum number of total pending requests, >= maxRequestsPerPeer.
-	maxPendingRequests := tmrand.Intn(maxTotalPendingRequestsTest-maxRequestsPerPeer) + maxRequestsPerPeer
-
-	// Generate the number of blocks to be synced.
-	numBlocks := int64(tmrand.Intn(maxNumBlocksInChainTest)) + startingHeight
-
-	// Generate a number of peers.
-	numPeers := tmrand.Intn(maxNumPeersTest) + 1
-
-	return makeCorrectTransitionSequence(startingHeight, numBlocks, numPeers, true, maxRequestsPerPeer, maxPendingRequests)
-}
-
-func shouldApplyProcessedBlockEvStep(step *fsmStepTestValues, testBcR *testReactor) bool {
-	if step.event == processedBlockEv {
-		_, err := testBcR.fsm.pool.BlockAndPeerAtHeight(testBcR.fsm.pool.Height)
-		if err == errMissingBlock {
-			return false
-		}
-		_, err = testBcR.fsm.pool.BlockAndPeerAtHeight(testBcR.fsm.pool.Height + 1)
-		if err == errMissingBlock {
-			return false
-		}
-	}
-	return true
-}
-
-func TestFSMCorrectTransitionSequences(t *testing.T) {
-
-	tests := []testFields{
-		makeCorrectTransitionSequence(1, 100, 10, true, 10, 40),
-		makeCorrectTransitionSequenceWithRandomParameters(),
-	}
-
-	for _, tt := range tests {
-		tt := tt
-		t.Run(tt.name, func(t *testing.T) {
-			// Create test reactor
-			testBcR := newTestReactor(tt.startingHeight)
-
-			if tt.maxRequestsPerPeer != 0 {
-				maxRequestsPerPeer = tt.maxRequestsPerPeer
-			}
-
-			for _, step := range tt.steps {
-				step := step
-				assert.Equal(t, step.currentState, testBcR.fsm.state.name)
-
-				oldNumStatusRequests := testBcR.numStatusRequests
-				fixBlockResponseEvStep(&step, testBcR)
-				if !shouldApplyProcessedBlockEvStep(&step, testBcR) {
-					continue
-				}
-
-				fsmErr := sendEventToFSM(testBcR.fsm, step.event, step.data)
-				assert.Equal(t, step.wantErr, fsmErr)
-
-				if step.wantStatusReqSent {
-					assert.Equal(t, oldNumStatusRequests+1, testBcR.numStatusRequests)
-				} else {
-					assert.Equal(t, oldNumStatusRequests, testBcR.numStatusRequests)
-				}
-
-				assert.Equal(t, step.wantState, testBcR.fsm.state.name)
-				if step.wantState == "finished" {
-					assert.True(t, testBcR.fsm.isCaughtUp())
-				}
-			}
-
-		})
-	}
-}
-
-// ----------------------------------------
-// implements the bcRNotifier
-func (testR *testReactor) sendPeerError(err error, peerID p2p.ID) {
-	testR.logger.Info("Reactor received sendPeerError call from FSM", "peer", peerID, "err", err)
-	testR.lastPeerError.peerID = peerID
-	testR.lastPeerError.err = err
-}
-
-func (testR *testReactor) sendStatusRequest() {
-	testR.logger.Info("Reactor received sendStatusRequest call from FSM")
-	testR.numStatusRequests++
-}
-
-func (testR *testReactor) sendBlockRequest(peerID p2p.ID, height int64) error {
-	testR.logger.Info("Reactor received sendBlockRequest call from FSM", "peer", peerID, "height", height)
-	testR.numBlockRequests++
-	testR.lastBlockRequest.peerID = peerID
-	testR.lastBlockRequest.height = height
-	if height == 9999999 {
-		// simulate switch does not have peer
-		return errNilPeerForBlockRequest
-	}
-	return nil
-}
-
-func (testR *testReactor) resetStateTimer(name string, timer **time.Timer, timeout time.Duration) {
-	testR.logger.Info("Reactor received resetStateTimer call from FSM", "state", name, "timeout", timeout)
-	if _, ok := testR.stateTimerStarts[name]; !ok {
-		testR.stateTimerStarts[name] = 1
-	} else {
-		testR.stateTimerStarts[name]++
-	}
-}
-
-func (testR *testReactor) switchToConsensus() {
-}
-
-// ----------------------------------------

blockchain/v1/reactor_test.go

@@ -1,365 +0,0 @@
-package v1
-
-import (
-	"fmt"
-	"os"
-	"sort"
-	"sync"
-	"testing"
-	"time"
-
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-
-	dbm "github.com/tendermint/tm-db"
-
-	abci "github.com/tendermint/tendermint/abci/types"
-	cfg "github.com/tendermint/tendermint/config"
-	"github.com/tendermint/tendermint/libs/log"
-	"github.com/tendermint/tendermint/mempool/mock"
-	"github.com/tendermint/tendermint/p2p"
-	tmproto "github.com/tendermint/tendermint/proto/tendermint/types"
-	"github.com/tendermint/tendermint/proxy"
-	sm "github.com/tendermint/tendermint/state"
-	"github.com/tendermint/tendermint/store"
-	"github.com/tendermint/tendermint/types"
-	tmtime "github.com/tendermint/tendermint/types/time"
-)
-
-var config *cfg.Config
-
-func randGenesisDoc(numValidators int, randPower bool, minPower int64) (*types.GenesisDoc, []types.PrivValidator) {
-	validators := make([]types.GenesisValidator, numValidators)
-	privValidators := make([]types.PrivValidator, numValidators)
-	for i := 0; i < numValidators; i++ {
-		val, privVal := types.RandValidator(randPower, minPower)
-		validators[i] = types.GenesisValidator{
-			PubKey: val.PubKey,
-			Power:  val.VotingPower,
-		}
-		privValidators[i] = privVal
-	}
-	sort.Sort(types.PrivValidatorsByAddress(privValidators))
-
-	return &types.GenesisDoc{
-		GenesisTime: tmtime.Now(),
-		ChainID:     config.ChainID(),
-		Validators:  validators,
-	}, privValidators
-}
-
-func makeVote(
-	t *testing.T,
-	header *types.Header,
-	blockID types.BlockID,
-	valset *types.ValidatorSet,
-	privVal types.PrivValidator) *types.Vote {
-
-	pubKey, err := privVal.GetPubKey()
-	require.NoError(t, err)
-
-	valIdx, _ := valset.GetByAddress(pubKey.Address())
-	vote := &types.Vote{
-		ValidatorAddress: pubKey.Address(),
-		ValidatorIndex:   valIdx,
-		Height:           header.Height,
-		Round:            1,
-		Timestamp:        tmtime.Now(),
-		Type:             tmproto.PrecommitType,
-		BlockID:          blockID,
-	}
-
-	vpb := vote.ToProto()
-
-	_ = privVal.SignVote(header.ChainID, vpb)
-	vote.Signature = vpb.Signature
-
-	return vote
-}
-
-type BlockchainReactorPair struct {
-	bcR  *BlockchainReactor
-	conR *consensusReactorTest
-}
-
-func newBlockchainReactor(
-	t *testing.T,
-	logger log.Logger,
-	genDoc *types.GenesisDoc,
-	privVals []types.PrivValidator,
-	maxBlockHeight int64) *BlockchainReactor {
-	if len(privVals) != 1 {
-		panic("only support one validator")
-	}
-
-	app := &testApp{}
-	cc := proxy.NewLocalClientCreator(app)
-	proxyApp := proxy.NewAppConns(cc)
-	err := proxyApp.Start()
-	if err != nil {
-		panic(fmt.Errorf("error start app: %w", err))
-	}
-
-	blockDB := dbm.NewMemDB()
-	stateDB := dbm.NewMemDB()
-	stateStore := sm.NewStore(stateDB)
-	blockStore := store.NewBlockStore(blockDB)
-
-	state, err := stateStore.LoadFromDBOrGenesisDoc(genDoc)
-	if err != nil {
-		panic(fmt.Errorf("error constructing state from genesis file: %w", err))
-	}
-
-	// Make the BlockchainReactor itself.
-	// NOTE we have to create and commit the blocks first because
-	// pool.height is determined from the store.
-	fastSync := true
-	db := dbm.NewMemDB()
-	stateStore = sm.NewStore(db)
-	blockExec := sm.NewBlockExecutor(stateStore, log.TestingLogger(), proxyApp.Consensus(),
-		mock.Mempool{}, sm.EmptyEvidencePool{})
-	if err = stateStore.Save(state); err != nil {
-		panic(err)
-	}
-
-	// let's add some blocks in
-	for blockHeight := int64(1); blockHeight <= maxBlockHeight; blockHeight++ {
-		lastCommit := types.NewCommit(blockHeight-1, 1, types.BlockID{}, nil)
-		if blockHeight > 1 {
-			lastBlockMeta := blockStore.LoadBlockMeta(blockHeight - 1)
-			lastBlock := blockStore.LoadBlock(blockHeight - 1)
-
-			vote := makeVote(t, &lastBlock.Header, lastBlockMeta.BlockID, state.Validators, privVals[0])
-			lastCommit = types.NewCommit(vote.Height, vote.Round, lastBlockMeta.BlockID, []types.CommitSig{vote.CommitSig()})
-		}
-
-		thisBlock := makeBlock(blockHeight, state, lastCommit)
-
-		thisParts := thisBlock.MakePartSet(types.BlockPartSizeBytes)
-		blockID := types.BlockID{Hash: thisBlock.Hash(), PartSetHeader: thisParts.Header()}
-
-		state, _, err = blockExec.ApplyBlock(state, blockID, thisBlock)
-		if err != nil {
-			panic(fmt.Errorf("error apply block: %w", err))
-		}
-
-		blockStore.SaveBlock(thisBlock, thisParts, lastCommit)
-	}
-
-	bcReactor := NewBlockchainReactor(state.Copy(), blockExec, blockStore, fastSync)
-	bcReactor.SetLogger(logger.With("module", "blockchain"))
-
-	return bcReactor
-}
-
-func newBlockchainReactorPair(
-	t *testing.T,
-	logger log.Logger,
-	genDoc *types.GenesisDoc,
-	privVals []types.PrivValidator,
-	maxBlockHeight int64) BlockchainReactorPair {
-
-	consensusReactor := &consensusReactorTest{}
-	consensusReactor.BaseReactor = *p2p.NewBaseReactor("Consensus reactor", consensusReactor)
-
-	return BlockchainReactorPair{
-		newBlockchainReactor(t, logger, genDoc, privVals, maxBlockHeight),
-		consensusReactor}
-}
-
-type consensusReactorTest struct {
-	p2p.BaseReactor     // BaseService + p2p.Switch
-	switchedToConsensus bool
-	mtx                 sync.Mutex
-}
-
-func (conR *consensusReactorTest) SwitchToConsensus(state sm.State, blocksSynced bool) {
-	conR.mtx.Lock()
-	defer conR.mtx.Unlock()
-	conR.switchedToConsensus = true
-}
-
-func TestFastSyncNoBlockResponse(t *testing.T) {
-
-	config = cfg.ResetTestRoot("blockchain_new_reactor_test")
-	defer os.RemoveAll(config.RootDir)
-	genDoc, privVals := randGenesisDoc(1, false, 30)
-
-	maxBlockHeight := int64(65)
-
-	reactorPairs := make([]BlockchainReactorPair, 2)
-
-	logger := log.TestingLogger()
-	reactorPairs[0] = newBlockchainReactorPair(t, logger, genDoc, privVals, maxBlockHeight)
-	reactorPairs[1] = newBlockchainReactorPair(t, logger, genDoc, privVals, 0)
-
-	p2p.MakeConnectedSwitches(config.P2P, 2, func(i int, s *p2p.Switch) *p2p.Switch {
-		s.AddReactor("BLOCKCHAIN", reactorPairs[i].bcR)
-		s.AddReactor("CONSENSUS", reactorPairs[i].conR)
-		moduleName := fmt.Sprintf("blockchain-%v", i)
-		reactorPairs[i].bcR.SetLogger(logger.With("module", moduleName))
-
-		return s
-
-	}, p2p.Connect2Switches)
-
-	defer func() {
-		for _, r := range reactorPairs {
-			_ = r.bcR.Stop()
-			_ = r.conR.Stop()
-		}
-	}()
-
-	tests := []struct {
-		height   int64
-		existent bool
-	}{
-		{maxBlockHeight + 2, false},
-		{10, true},
-		{1, true},
-		{maxBlockHeight + 100, false},
-	}
-
-	for {
-		time.Sleep(10 * time.Millisecond)
-		reactorPairs[1].conR.mtx.Lock()
-		if reactorPairs[1].conR.switchedToConsensus {
-			reactorPairs[1].conR.mtx.Unlock()
-			break
-		}
-		reactorPairs[1].conR.mtx.Unlock()
-	}
-
-	assert.Equal(t, maxBlockHeight, reactorPairs[0].bcR.store.Height())
-
-	for _, tt := range tests {
-		block := reactorPairs[1].bcR.store.LoadBlock(tt.height)
-		if tt.existent {
-			assert.True(t, block != nil)
-		} else {
-			assert.True(t, block == nil)
-		}
-	}
-}
-
-// NOTE: This is too hard to test without
-// an easy way to add test peer to switch
-// or without significant refactoring of the module.
-// Alternatively we could actually dial a TCP conn but
-// that seems extreme.
-func TestFastSyncBadBlockStopsPeer(t *testing.T) {
-	numNodes := 4
-	maxBlockHeight := int64(148)
-
-	config = cfg.ResetTestRoot("blockchain_reactor_test")
-	defer os.RemoveAll(config.RootDir)
-	genDoc, privVals := randGenesisDoc(1, false, 30)
-
-	otherChain := newBlockchainReactorPair(t, log.TestingLogger(), genDoc, privVals, maxBlockHeight)
-	defer func() {
-		_ = otherChain.bcR.Stop()
-		_ = otherChain.conR.Stop()
-	}()
-
-	reactorPairs := make([]BlockchainReactorPair, numNodes)
-	logger := make([]log.Logger, numNodes)
-
-	for i := 0; i < numNodes; i++ {
-		logger[i] = log.TestingLogger()
-		height := int64(0)
-		if i == 0 {
-			height = maxBlockHeight
-		}
-		reactorPairs[i] = newBlockchainReactorPair(t, logger[i], genDoc, privVals, height)
-	}
-
-	switches := p2p.MakeConnectedSwitches(config.P2P, numNodes, func(i int, s *p2p.Switch) *p2p.Switch {
-		reactorPairs[i].conR.mtx.Lock()
-		s.AddReactor("BLOCKCHAIN", reactorPairs[i].bcR)
-		s.AddReactor("CONSENSUS", reactorPairs[i].conR)
-		moduleName := fmt.Sprintf("blockchain-%v", i)
-		reactorPairs[i].bcR.SetLogger(logger[i].With("module", moduleName))
-		reactorPairs[i].conR.mtx.Unlock()
-		return s
-
-	}, p2p.Connect2Switches)
-
-	defer func() {
-		for _, r := range reactorPairs {
-			_ = r.bcR.Stop()
-			_ = r.conR.Stop()
-		}
-	}()
-
-outerFor:
-	for {
-		time.Sleep(10 * time.Millisecond)
-		for i := 0; i < numNodes; i++ {
-			reactorPairs[i].conR.mtx.Lock()
-			if !reactorPairs[i].conR.switchedToConsensus {
-				reactorPairs[i].conR.mtx.Unlock()
-				continue outerFor
-			}
-			reactorPairs[i].conR.mtx.Unlock()
-		}
-		break
-	}
-
-	// at this time, reactors[0-3] is the newest
-	assert.Equal(t, numNodes-1, reactorPairs[1].bcR.Switch.Peers().Size())
-
-	// mark last reactorPair as an invalid peer
-	reactorPairs[numNodes-1].bcR.store = otherChain.bcR.store
-
-	lastLogger := log.TestingLogger()
-	lastReactorPair := newBlockchainReactorPair(t, lastLogger, genDoc, privVals, 0)
-	reactorPairs = append(reactorPairs, lastReactorPair)
-
-	switches = append(switches, p2p.MakeConnectedSwitches(config.P2P, 1, func(i int, s *p2p.Switch) *p2p.Switch {
-		s.AddReactor("BLOCKCHAIN", reactorPairs[len(reactorPairs)-1].bcR)
-		s.AddReactor("CONSENSUS", reactorPairs[len(reactorPairs)-1].conR)
-		moduleName := fmt.Sprintf("blockchain-%v", len(reactorPairs)-1)
-		reactorPairs[len(reactorPairs)-1].bcR.SetLogger(lastLogger.With("module", moduleName))
-		return s
-
-	}, p2p.Connect2Switches)...)
-
-	for i := 0; i < len(reactorPairs)-1; i++ {
-		p2p.Connect2Switches(switches, i, len(reactorPairs)-1)
-	}
-
-	for {
-		time.Sleep(1 * time.Second)
-		lastReactorPair.conR.mtx.Lock()
-		if lastReactorPair.conR.switchedToConsensus {
-			lastReactorPair.conR.mtx.Unlock()
-			break
-		}
-		lastReactorPair.conR.mtx.Unlock()
-
-		if lastReactorPair.bcR.Switch.Peers().Size() == 0 {
-			break
-		}
-	}
-
-	assert.True(t, lastReactorPair.bcR.Switch.Peers().Size() < len(reactorPairs)-1)
-}
-
-//----------------------------------------------
-// utility funcs
-
-func makeTxs(height int64) (txs []types.Tx) {
-	for i := 0; i < 10; i++ {
-		txs = append(txs, types.Tx([]byte{byte(height), byte(i)}))
-	}
-	return txs
-}
-
-func makeBlock(height int64, state sm.State, lastCommit *types.Commit) *types.Block {
-	block, _ := state.MakeBlock(height, makeTxs(height), lastCommit, nil, state.Validators.GetProposer().Address)
-	return block
-}
-
-type testApp struct {
-	abci.BaseApplication
-}

blockchain/v2/io.go

@@ -1,21 +1,26 @@
 package v2
 
 import (
-	"fmt"
+	"errors"
 
-	bc "github.com/tendermint/tendermint/blockchain"
+	"github.com/gogo/protobuf/proto"
 	"github.com/tendermint/tendermint/p2p"
 	bcproto "github.com/tendermint/tendermint/proto/tendermint/blockchain"
 	"github.com/tendermint/tendermint/state"
 	"github.com/tendermint/tendermint/types"
 )
 
-type iIO interface {
-	sendBlockRequest(peerID p2p.ID, height int64) error
-	sendBlockToPeer(block *types.Block, peerID p2p.ID) error
-	sendBlockNotFound(height int64, peerID p2p.ID) error
-	sendStatusResponse(base, height int64, peerID p2p.ID) error
+var (
+	errPeerQueueFull = errors.New("peer queue full")
+)
 
+type iIO interface {
+	sendBlockRequest(peer p2p.Peer, height int64) error
+	sendBlockToPeer(block *types.Block, peer p2p.Peer) error
+	sendBlockNotFound(height int64, peer p2p.Peer) error
+	sendStatusResponse(base, height int64, peer p2p.Peer) error
+
+	sendStatusRequest(peer p2p.Peer) error
 	broadcastStatusRequest() error
 
 	trySwitchToConsensus(state state.State, skipWAL bool) bool
@@ -42,46 +47,50 @@ type consensusReactor interface {
 	SwitchToConsensus(state state.State, skipWAL bool)
 }
 
-func (sio *switchIO) sendBlockRequest(peerID p2p.ID, height int64) error {
-	peer := sio.sw.Peers().Get(peerID)
-	if peer == nil {
-		return fmt.Errorf("peer not found")
+func (sio *switchIO) sendBlockRequest(peer p2p.Peer, height int64) error {
+	msgProto := &bcproto.Message{
+		Sum: &bcproto.Message_BlockRequest{
+			BlockRequest: &bcproto.BlockRequest{
+				Height: height,
+			},
+		},
 	}
-	msgBytes, err := bc.EncodeMsg(&bcproto.BlockRequest{Height: height})
+
+	msgBytes, err := proto.Marshal(msgProto)
 	if err != nil {
 		return err
 	}
 
 	queued := peer.TrySend(BlockchainChannel, msgBytes)
 	if !queued {
-		return fmt.Errorf("send queue full")
+		return errPeerQueueFull
 	}
 	return nil
 }
 
-func (sio *switchIO) sendStatusResponse(base int64, height int64, peerID p2p.ID) error {
-	peer := sio.sw.Peers().Get(peerID)
-	if peer == nil {
-		return fmt.Errorf("peer not found")
+func (sio *switchIO) sendStatusResponse(base int64, height int64, peer p2p.Peer) error {
+	msgProto := &bcproto.Message{
+		Sum: &bcproto.Message_StatusResponse{
+			StatusResponse: &bcproto.StatusResponse{
+				Height: height,
+				Base:   base,
+			},
+		},
 	}
 
-	msgBytes, err := bc.EncodeMsg(&bcproto.StatusResponse{Height: height, Base: base})
+	msgBytes, err := proto.Marshal(msgProto)
 	if err != nil {
 		return err
 	}
 
 	if queued := peer.TrySend(BlockchainChannel, msgBytes); !queued {
-		return fmt.Errorf("peer queue full")
+		return errPeerQueueFull
 	}
 
 	return nil
 }
 
-func (sio *switchIO) sendBlockToPeer(block *types.Block, peerID p2p.ID) error {
-	peer := sio.sw.Peers().Get(peerID)
-	if peer == nil {
-		return fmt.Errorf("peer not found")
-	}
+func (sio *switchIO) sendBlockToPeer(block *types.Block, peer p2p.Peer) error {
 	if block == nil {
 		panic("trying to send nil block")
 	}
@@ -91,29 +100,42 @@ func (sio *switchIO) sendBlockToPeer(block *types.Block, peerID p2p.ID) error {
 		return err
 	}
 
-	msgBytes, err := bc.EncodeMsg(&bcproto.BlockResponse{Block: bpb})
+	msgProto := &bcproto.Message{
+		Sum: &bcproto.Message_BlockResponse{
+			BlockResponse: &bcproto.BlockResponse{
+				Block: bpb,
+			},
+		},
+	}
+
+	msgBytes, err := proto.Marshal(msgProto)
 	if err != nil {
 		return err
 	}
+
 	if queued := peer.TrySend(BlockchainChannel, msgBytes); !queued {
-		return fmt.Errorf("peer queue full")
+		return errPeerQueueFull
 	}
 
 	return nil
 }
 
-func (sio *switchIO) sendBlockNotFound(height int64, peerID p2p.ID) error {
-	peer := sio.sw.Peers().Get(peerID)
-	if peer == nil {
-		return fmt.Errorf("peer not found")
+func (sio *switchIO) sendBlockNotFound(height int64, peer p2p.Peer) error {
+	msgProto := &bcproto.Message{
+		Sum: &bcproto.Message_NoBlockResponse{
+			NoBlockResponse: &bcproto.NoBlockResponse{
+				Height: height,
+			},
+		},
 	}
-	msgBytes, err := bc.EncodeMsg(&bcproto.NoBlockResponse{Height: height})
+
+	msgBytes, err := proto.Marshal(msgProto)
 	if err != nil {
 		return err
 	}
 
 	if queued := peer.TrySend(BlockchainChannel, msgBytes); !queued {
-		return fmt.Errorf("peer queue full")
+		return errPeerQueueFull
 	}
 
 	return nil
@@ -127,8 +149,33 @@ func (sio *switchIO) trySwitchToConsensus(state state.State, skipWAL bool) bool
 	return ok
 }
 
+func (sio *switchIO) sendStatusRequest(peer p2p.Peer) error {
+	msgProto := &bcproto.Message{
+		Sum: &bcproto.Message_StatusRequest{
+			StatusRequest: &bcproto.StatusRequest{},
+		},
+	}
+
+	msgBytes, err := proto.Marshal(msgProto)
+	if err != nil {
+		return err
+	}
+
+	if queued := peer.TrySend(BlockchainChannel, msgBytes); !queued {
+		return errPeerQueueFull
+	}
+
+	return nil
+}
+
 func (sio *switchIO) broadcastStatusRequest() error {
-	msgBytes, err := bc.EncodeMsg(&bcproto.StatusRequest{})
+	msgProto := &bcproto.Message{
+		Sum: &bcproto.Message_StatusRequest{
+			StatusRequest: &bcproto.StatusRequest{},
+		},
+	}
+
+	msgBytes, err := proto.Marshal(msgProto)
 	if err != nil {
 		return err
 	}

blockchain/v2/processor.go

@@ -13,8 +13,8 @@ import (
 type pcBlockVerificationFailure struct {
 	priorityNormal
 	height       int64
-	firstPeerID  p2p.ID
-	secondPeerID p2p.ID
+	firstPeerID  p2p.NodeID
+	secondPeerID p2p.NodeID
 }
 
 func (e pcBlockVerificationFailure) String() string {
@@ -26,7 +26,7 @@ func (e pcBlockVerificationFailure) String() string {
 type pcBlockProcessed struct {
 	priorityNormal
 	height int64
-	peerID p2p.ID
+	peerID p2p.NodeID
 }
 
 func (e pcBlockProcessed) String() string {
@@ -46,7 +46,7 @@ func (p pcFinished) Error() string {
 
 type queueItem struct {
 	block  *types.Block
-	peerID p2p.ID
+	peerID p2p.NodeID
 }
 
 type blockQueue map[int64]queueItem
@@ -95,7 +95,7 @@ func (state *pcState) synced() bool {
 	return len(state.queue) <= 1
 }
 
-func (state *pcState) enqueue(peerID p2p.ID, block *types.Block, height int64) {
+func (state *pcState) enqueue(peerID p2p.NodeID, block *types.Block, height int64) {
 	if item, ok := state.queue[height]; ok {
 		panic(fmt.Sprintf(
 			"duplicate block %d (%X) enqueued by processor (sent by %v; existing block %X from %v)",
@@ -110,7 +110,7 @@ func (state *pcState) height() int64 {
 }
 
 // purgePeer moves all unprocessed blocks from the queue
-func (state *pcState) purgePeer(peerID p2p.ID) {
+func (state *pcState) purgePeer(peerID p2p.NodeID) {
 	// what if height is less than state.height?
 	for height, item := range state.queue {
 		if item.peerID == peerID {

blockchain/v2/processor_test.go

@@ -40,7 +40,7 @@ func makeState(p *params) *pcState {
 	state := newPcState(context)
 
 	for _, item := range p.items {
-		state.enqueue(p2p.ID(item.pid), makePcBlock(item.height), item.height)
+		state.enqueue(p2p.NodeID(item.pid), makePcBlock(item.height), item.height)
 	}
 
 	state.blocksSynced = p.blocksSynced
@@ -48,7 +48,7 @@ func makeState(p *params) *pcState {
 	return state
 }
 
-func mBlockResponse(peerID p2p.ID, height int64) scBlockReceived {
+func mBlockResponse(peerID p2p.NodeID, height int64) scBlockReceived {
 	return scBlockReceived{
 		peerID: peerID,
 		block:  makePcBlock(height),

blockchain/v2/reactor.go

@@ -5,6 +5,8 @@ import (
 	"fmt"
 	"time"
 
+	proto "github.com/gogo/protobuf/proto"
+
 	"github.com/tendermint/tendermint/behaviour"
 	bc "github.com/tendermint/tendermint/blockchain"
 	"github.com/tendermint/tendermint/libs/log"
@@ -47,11 +49,6 @@ type BlockchainReactor struct {
 	store    blockStore
 }
 
-//nolint:unused,deadcode
-type blockVerifier interface {
-	VerifyCommit(chainID string, blockID types.BlockID, height int64, commit *types.Commit) error
-}
-
 type blockApplier interface {
 	ApplyBlock(state state.State, blockID types.BlockID, block *types.Block) (state.State, int64, error)
 }
@@ -214,7 +211,7 @@ func (e rProcessBlock) String() string {
 type bcBlockResponse struct {
 	priorityNormal
 	time   time.Time
-	peerID p2p.ID
+	peerID p2p.NodeID
 	size   int64
 	block  *types.Block
 }
@@ -228,7 +225,7 @@ func (resp bcBlockResponse) String() string {
 type bcNoBlockResponse struct {
 	priorityNormal
 	time   time.Time
-	peerID p2p.ID
+	peerID p2p.NodeID
 	height int64
 }
 
@@ -241,7 +238,7 @@ func (resp bcNoBlockResponse) String() string {
 type bcStatusResponse struct {
 	priorityNormal
 	time   time.Time
-	peerID p2p.ID
+	peerID p2p.NodeID
 	base   int64
 	height int64
 }
@@ -254,7 +251,7 @@ func (resp bcStatusResponse) String() string {
 // new peer is connected
 type bcAddNewPeer struct {
 	priorityNormal
-	peerID p2p.ID
+	peerID p2p.NodeID
 }
 
 func (resp bcAddNewPeer) String() string {
@@ -264,7 +261,7 @@ func (resp bcAddNewPeer) String() string {
 // existing peer is removed
 type bcRemovePeer struct {
 	priorityHigh
-	peerID p2p.ID
+	peerID p2p.NodeID
 	reason interface{}
 }
 
@@ -316,6 +313,9 @@ func (r *BlockchainReactor) demux(events <-chan Event) {
 	defer doStatusTk.Stop()
 	doStatusCh <- struct{}{} // immediately broadcast to get status of existing peers
 
+	// Memoize the scSchedulerFail error to avoid printing it every scheduleFreq.
+	var scSchedulerFailErr error
+
 	// XXX: Extract timers to make testing atemporal
 	for {
 		select {
@@ -380,14 +380,22 @@ func (r *BlockchainReactor) demux(events <-chan Event) {
 					r.logger.Error("Error reporting peer", "err", err)
 				}
 			case scBlockRequest:
-				if err := r.io.sendBlockRequest(event.peerID, event.height); err != nil {
+				peer := r.Switch.Peers().Get(event.peerID)
+				if peer == nil {
+					r.logger.Error("Wanted to send block request, but no such peer", "peerID", event.peerID)
+					continue
+				}
+				if err := r.io.sendBlockRequest(peer, event.height); err != nil {
 					r.logger.Error("Error sending block request", "err", err)
 				}
 			case scFinishedEv:
 				r.processor.send(event)
 				r.scheduler.stop()
 			case scSchedulerFail:
-				r.logger.Error("Scheduler failure", "err", event.reason.Error())
+				if scSchedulerFailErr != event.reason {
+					r.logger.Error("Scheduler failure", "err", event.reason.Error())
+					scSchedulerFailErr = event.reason
+				}
 			case scPeersPruned:
 				// Remove peers from the processor.
 				for _, peerID := range event.peers {
@@ -455,54 +463,62 @@ func (r *BlockchainReactor) Stop() error {
 }
 
 // Receive implements Reactor by handling different message types.
+// XXX: do not call any methods that can block or incur heavy processing.
+// https://github.com/tendermint/tendermint/issues/2888
 func (r *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
-	msg, err := bc.DecodeMsg(msgBytes)
-	if err != nil {
-		r.logger.Error("error decoding message",
-			"src", src.ID(), "chId", chID, "msg", msg, "err", err)
+	logger := r.logger.With("src", src.ID(), "chID", chID)
+
+	msgProto := new(bcproto.Message)
+
+	if err := proto.Unmarshal(msgBytes, msgProto); err != nil {
+		logger.Error("error decoding message", "err", err)
 		_ = r.reporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
 		return
 	}
 
-	if err = bc.ValidateMsg(msg); err != nil {
-		r.logger.Error("peer sent us invalid msg", "peer", src, "msg", msg, "err", err)
+	if err := msgProto.Validate(); err != nil {
+		logger.Error("peer sent us an invalid msg", "msg", msgProto, "err", err)
 		_ = r.reporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
 		return
 	}
 
-	r.logger.Debug("Receive", "src", src.ID(), "chID", chID, "msg", msg)
+	r.logger.Debug("received", "msg", msgProto)
 
-	switch msg := msg.(type) {
-	case *bcproto.StatusRequest:
-		if err := r.io.sendStatusResponse(r.store.Base(), r.store.Height(), src.ID()); err != nil {
-			r.logger.Error("Could not send status message to peer", "src", src)
+	switch msg := msgProto.Sum.(type) {
+	case *bcproto.Message_StatusRequest:
+		if err := r.io.sendStatusResponse(r.store.Base(), r.store.Height(), src); err != nil {
+			logger.Error("Could not send status message to src peer")
 		}
 
-	case *bcproto.BlockRequest:
-		block := r.store.LoadBlock(msg.Height)
+	case *bcproto.Message_BlockRequest:
+		block := r.store.LoadBlock(msg.BlockRequest.Height)
 		if block != nil {
-			if err = r.io.sendBlockToPeer(block, src.ID()); err != nil {
-				r.logger.Error("Could not send block message to peer: ", err)
+			if err := r.io.sendBlockToPeer(block, src); err != nil {
+				logger.Error("Could not send block message to src peer", "err", err)
 			}
 		} else {
-			r.logger.Info("peer asking for a block we don't have", "src", src, "height", msg.Height)
-			peerID := src.ID()
-			if err = r.io.sendBlockNotFound(msg.Height, peerID); err != nil {
-				r.logger.Error("Couldn't send block not found: ", err)
+			logger.Info("peer asking for a block we don't have", "height", msg.BlockRequest.Height)
+			if err := r.io.sendBlockNotFound(msg.BlockRequest.Height, src); err != nil {
+				logger.Error("Couldn't send block not found msg", "err", err)
 			}
 		}
 
-	case *bcproto.StatusResponse:
+	case *bcproto.Message_StatusResponse:
 		r.mtx.RLock()
 		if r.events != nil {
-			r.events <- bcStatusResponse{peerID: src.ID(), base: msg.Base, height: msg.Height}
+			r.events <- bcStatusResponse{
+				peerID: src.ID(),
+				base:   msg.StatusResponse.Base,
+				height: msg.StatusResponse.Height,
+			}
 		}
 		r.mtx.RUnlock()
 
-	case *bcproto.BlockResponse:
-		bi, err := types.BlockFromProto(msg.Block)
+	case *bcproto.Message_BlockResponse:
+		bi, err := types.BlockFromProto(msg.BlockResponse.Block)
 		if err != nil {
-			r.logger.Error("error transitioning block from protobuf", "err", err)
+			logger.Error("error transitioning block from protobuf", "err", err)
+			_ = r.reporter.Report(behaviour.BadMessage(src.ID(), err.Error()))
 			return
 		}
 		r.mtx.RLock()
@@ -516,10 +532,14 @@ func (r *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
 		}
 		r.mtx.RUnlock()
 
-	case *bcproto.NoBlockResponse:
+	case *bcproto.Message_NoBlockResponse:
 		r.mtx.RLock()
 		if r.events != nil {
-			r.events <- bcNoBlockResponse{peerID: src.ID(), height: msg.Height, time: time.Now()}
+			r.events <- bcNoBlockResponse{
+				peerID: src.ID(),
+				height: msg.NoBlockResponse.Height,
+				time:   time.Now(),
+			}
 		}
 		r.mtx.RUnlock()
 	}
@@ -527,10 +547,16 @@ func (r *BlockchainReactor) Receive(chID byte, src p2p.Peer, msgBytes []byte) {
 
 // AddPeer implements Reactor interface
 func (r *BlockchainReactor) AddPeer(peer p2p.Peer) {
-	err := r.io.sendStatusResponse(r.store.Base(), r.store.Height(), peer.ID())
+	err := r.io.sendStatusResponse(r.store.Base(), r.store.Height(), peer)
 	if err != nil {
-		r.logger.Error("Could not send status message to peer new", "src", peer.ID, "height", r.SyncHeight())
+		r.logger.Error("could not send our status to the new peer", "peer", peer.ID, "err", err)
 	}
+
+	err = r.io.sendStatusRequest(peer)
+	if err != nil {
+		r.logger.Error("could not send status request to the new peer", "peer", peer.ID, "err", err)
+	}
+
 	r.mtx.RLock()
 	defer r.mtx.RUnlock()
 	if r.events != nil {

blockchain/v2/reactor_test.go

@@ -9,13 +9,13 @@ import (
 	"testing"
 	"time"
 
+	"github.com/gogo/protobuf/proto"
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 	dbm "github.com/tendermint/tm-db"
 
 	abci "github.com/tendermint/tendermint/abci/types"
 	"github.com/tendermint/tendermint/behaviour"
-	bc "github.com/tendermint/tendermint/blockchain"
 	cfg "github.com/tendermint/tendermint/config"
 	"github.com/tendermint/tendermint/libs/log"
 	"github.com/tendermint/tendermint/libs/service"
@@ -32,11 +32,11 @@ import (
 
 type mockPeer struct {
 	service.Service
-	id p2p.ID
+	id p2p.NodeID
 }
 
 func (mp mockPeer) FlushStop()           {}
-func (mp mockPeer) ID() p2p.ID           { return mp.id }
+func (mp mockPeer) ID() p2p.NodeID       { return mp.id }
 func (mp mockPeer) RemoteIP() net.IP     { return net.IP{} }
 func (mp mockPeer) RemoteAddr() net.Addr { return &net.TCPAddr{IP: mp.RemoteIP(), Port: 8800} }
 
@@ -45,9 +45,9 @@ func (mp mockPeer) IsPersistent() bool { return true }
 func (mp mockPeer) CloseConn() error   { return nil }
 
 func (mp mockPeer) NodeInfo() p2p.NodeInfo {
-	return p2p.DefaultNodeInfo{
-		DefaultNodeID: "",
-		ListenAddr:    "",
+	return p2p.NodeInfo{
+		NodeID:     "",
+		ListenAddr: "",
 	}
 }
 func (mp mockPeer) Status() conn.ConnectionStatus { return conn.ConnectionStatus{} }
@@ -59,22 +59,19 @@ func (mp mockPeer) TrySend(byte, []byte) bool { return true }
 func (mp mockPeer) Set(string, interface{}) {}
 func (mp mockPeer) Get(string) interface{}  { return struct{}{} }
 
-// nolint:unused // ignore
+//nolint:unused
 type mockBlockStore struct {
 	blocks map[int64]*types.Block
 }
 
-// nolint:unused // ignore
 func (ml *mockBlockStore) Height() int64 {
 	return int64(len(ml.blocks))
 }
 
-// nolint:unused // ignore
 func (ml *mockBlockStore) LoadBlock(height int64) *types.Block {
 	return ml.blocks[height]
 }
 
-// nolint:unused // ignore
 func (ml *mockBlockStore) SaveBlock(block *types.Block, part *types.PartSet, commit *types.Commit) {
 	ml.blocks[block.Height] = block
 }
@@ -96,34 +93,37 @@ type mockSwitchIo struct {
 	numStatusResponse   int
 	numBlockResponse    int
 	numNoBlockResponse  int
+	numStatusRequest    int
 }
 
-func (sio *mockSwitchIo) sendBlockRequest(peerID p2p.ID, height int64) error {
+var _ iIO = (*mockSwitchIo)(nil)
+
+func (sio *mockSwitchIo) sendBlockRequest(_ p2p.Peer, _ int64) error {
 	return nil
 }
 
-func (sio *mockSwitchIo) sendStatusResponse(base, height int64, peerID p2p.ID) error {
+func (sio *mockSwitchIo) sendStatusResponse(_, _ int64, _ p2p.Peer) error {
 	sio.mtx.Lock()
 	defer sio.mtx.Unlock()
 	sio.numStatusResponse++
 	return nil
 }
 
-func (sio *mockSwitchIo) sendBlockToPeer(block *types.Block, peerID p2p.ID) error {
+func (sio *mockSwitchIo) sendBlockToPeer(_ *types.Block, _ p2p.Peer) error {
 	sio.mtx.Lock()
 	defer sio.mtx.Unlock()
 	sio.numBlockResponse++
 	return nil
 }
 
-func (sio *mockSwitchIo) sendBlockNotFound(height int64, peerID p2p.ID) error {
+func (sio *mockSwitchIo) sendBlockNotFound(_ int64, _ p2p.Peer) error {
 	sio.mtx.Lock()
 	defer sio.mtx.Unlock()
 	sio.numNoBlockResponse++
 	return nil
 }
 
-func (sio *mockSwitchIo) trySwitchToConsensus(state sm.State, skipWAL bool) bool {
+func (sio *mockSwitchIo) trySwitchToConsensus(_ sm.State, _ bool) bool {
 	sio.mtx.Lock()
 	defer sio.mtx.Unlock()
 	sio.switchedToConsensus = true
@@ -134,6 +134,13 @@ func (sio *mockSwitchIo) broadcastStatusRequest() error {
 	return nil
 }
 
+func (sio *mockSwitchIo) sendStatusRequest(_ p2p.Peer) error {
+	sio.mtx.Lock()
+	defer sio.mtx.Unlock()
+	sio.numStatusRequest++
+	return nil
+}
+
 type testReactorParams struct {
 	logger      log.Logger
 	genDoc      *types.GenesisDoc
@@ -402,23 +409,37 @@ func TestReactorHelperMode(t *testing.T) {
 				switch ev := step.event.(type) {
 				case bcproto.StatusRequest:
 					old := mockSwitch.numStatusResponse
-					msg, err := bc.EncodeMsg(&ev)
-					assert.NoError(t, err)
-					reactor.Receive(channelID, mockPeer{id: p2p.ID(step.peer)}, msg)
+
+					msgProto := new(bcproto.Message)
+					require.NoError(t, msgProto.Wrap(&ev))
+
+					msgBz, err := proto.Marshal(msgProto)
+					require.NoError(t, err)
+
+					reactor.Receive(channelID, mockPeer{id: p2p.NodeID(step.peer)}, msgBz)
 					assert.Equal(t, old+1, mockSwitch.numStatusResponse)
 				case bcproto.BlockRequest:
 					if ev.Height > params.startHeight {
 						old := mockSwitch.numNoBlockResponse
-						msg, err := bc.EncodeMsg(&ev)
-						assert.NoError(t, err)
-						reactor.Receive(channelID, mockPeer{id: p2p.ID(step.peer)}, msg)
+
+						msgProto := new(bcproto.Message)
+						require.NoError(t, msgProto.Wrap(&ev))
+
+						msgBz, err := proto.Marshal(msgProto)
+						require.NoError(t, err)
+
+						reactor.Receive(channelID, mockPeer{id: p2p.NodeID(step.peer)}, msgBz)
 						assert.Equal(t, old+1, mockSwitch.numNoBlockResponse)
 					} else {
 						old := mockSwitch.numBlockResponse
-						msg, err := bc.EncodeMsg(&ev)
-						assert.NoError(t, err)
-						assert.NoError(t, err)
-						reactor.Receive(channelID, mockPeer{id: p2p.ID(step.peer)}, msg)
+
+						msgProto := new(bcproto.Message)
+						require.NoError(t, msgProto.Wrap(&ev))
+
+						msgBz, err := proto.Marshal(msgProto)
+						require.NoError(t, err)
+
+						reactor.Receive(channelID, mockPeer{id: p2p.NodeID(step.peer)}, msgBz)
 						assert.Equal(t, old+1, mockSwitch.numBlockResponse)
 					}
 				}

blockchain/v2/scheduler.go

@@ -26,7 +26,7 @@ func (e scFinishedEv) String() string {
 // send a blockRequest message
 type scBlockRequest struct {
 	priorityNormal
-	peerID p2p.ID
+	peerID p2p.NodeID
 	height int64
 }
 
@@ -37,7 +37,7 @@ func (e scBlockRequest) String() string {
 // a block has been received and validated by the scheduler
 type scBlockReceived struct {
 	priorityNormal
-	peerID p2p.ID
+	peerID p2p.NodeID
 	block  *types.Block
 }
 
@@ -48,7 +48,7 @@ func (e scBlockReceived) String() string {
 // scheduler detected a peer error
 type scPeerError struct {
 	priorityHigh
-	peerID p2p.ID
+	peerID p2p.NodeID
 	reason error
 }
 
@@ -59,7 +59,7 @@ func (e scPeerError) String() string {
 // scheduler removed a set of peers (timed out or slow peer)
 type scPeersPruned struct {
 	priorityHigh
-	peers []p2p.ID
+	peers []p2p.NodeID
 }
 
 func (e scPeersPruned) String() string {
@@ -126,7 +126,7 @@ func (e peerState) String() string {
 }
 
 type scPeer struct {
-	peerID p2p.ID
+	peerID p2p.NodeID
 
 	// initialized as New when peer is added, updated to Ready when statusUpdate is received,
 	// updated to Removed when peer is removed
@@ -143,7 +143,7 @@ func (p scPeer) String() string {
 		p.state, p.base, p.height, p.lastTouched, p.lastRate, p.peerID)
 }
 
-func newScPeer(peerID p2p.ID) *scPeer {
+func newScPeer(peerID p2p.NodeID) *scPeer {
 	return &scPeer{
 		peerID:      peerID,
 		state:       peerStateNew,
@@ -171,7 +171,7 @@ type scheduler struct {
 
 	// a map of peerID to scheduler specific peer struct `scPeer` used to keep
 	// track of peer specific state
-	peers       map[p2p.ID]*scPeer
+	peers       map[p2p.NodeID]*scPeer
 	peerTimeout time.Duration // maximum response time from a peer otherwise prune
 	minRecvRate int64         // minimum receive rate from peer otherwise prune
 
@@ -183,13 +183,13 @@ type scheduler struct {
 	blockStates map[int64]blockState
 
 	// a map of heights to the peer we are waiting a response from
-	pendingBlocks map[int64]p2p.ID
+	pendingBlocks map[int64]p2p.NodeID
 
 	// the time at which a block was put in blockStatePending
 	pendingTime map[int64]time.Time
 
 	// a map of heights to the peers that put the block in blockStateReceived
-	receivedBlocks map[int64]p2p.ID
+	receivedBlocks map[int64]p2p.NodeID
 }
 
 func (sc scheduler) String() string {
@@ -204,10 +204,10 @@ func newScheduler(initHeight int64, startTime time.Time) *scheduler {
 		syncTimeout:    60 * time.Second,
 		height:         initHeight,
 		blockStates:    make(map[int64]blockState),
-		peers:          make(map[p2p.ID]*scPeer),
-		pendingBlocks:  make(map[int64]p2p.ID),
+		peers:          make(map[p2p.NodeID]*scPeer),
+		pendingBlocks:  make(map[int64]p2p.NodeID),
 		pendingTime:    make(map[int64]time.Time),
-		receivedBlocks: make(map[int64]p2p.ID),
+		receivedBlocks: make(map[int64]p2p.NodeID),
 		targetPending:  10,               // TODO - pass as param
 		peerTimeout:    15 * time.Second, // TODO - pass as param
 		minRecvRate:    0,                // int64(7680), TODO - pass as param
@@ -216,14 +216,14 @@ func newScheduler(initHeight int64, startTime time.Time) *scheduler {
 	return &sc
 }
 
-func (sc *scheduler) ensurePeer(peerID p2p.ID) *scPeer {
+func (sc *scheduler) ensurePeer(peerID p2p.NodeID) *scPeer {
 	if _, ok := sc.peers[peerID]; !ok {
 		sc.peers[peerID] = newScPeer(peerID)
 	}
 	return sc.peers[peerID]
 }
 
-func (sc *scheduler) touchPeer(peerID p2p.ID, time time.Time) error {
+func (sc *scheduler) touchPeer(peerID p2p.NodeID, time time.Time) error {
 	peer, ok := sc.peers[peerID]
 	if !ok {
 		return fmt.Errorf("couldn't find peer %s", peerID)
@@ -238,7 +238,7 @@ func (sc *scheduler) touchPeer(peerID p2p.ID, time time.Time) error {
 	return nil
 }
 
-func (sc *scheduler) removePeer(peerID p2p.ID) {
+func (sc *scheduler) removePeer(peerID p2p.NodeID) {
 	peer, ok := sc.peers[peerID]
 	if !ok {
 		return
@@ -298,7 +298,7 @@ func (sc *scheduler) addNewBlocks() {
 	}
 }
 
-func (sc *scheduler) setPeerRange(peerID p2p.ID, base int64, height int64) error {
+func (sc *scheduler) setPeerRange(peerID p2p.NodeID, base int64, height int64) error {
 	peer := sc.ensurePeer(peerID)
 
 	if peer.state == peerStateRemoved {
@@ -333,8 +333,8 @@ func (sc *scheduler) getStateAtHeight(height int64) blockState {
 	}
 }
 
-func (sc *scheduler) getPeersWithHeight(height int64) []p2p.ID {
-	peers := make([]p2p.ID, 0)
+func (sc *scheduler) getPeersWithHeight(height int64) []p2p.NodeID {
+	peers := make([]p2p.NodeID, 0)
 	for _, peer := range sc.peers {
 		if peer.state != peerStateReady {
 			continue
@@ -346,8 +346,8 @@ func (sc *scheduler) getPeersWithHeight(height int64) []p2p.ID {
 	return peers
 }
 
-func (sc *scheduler) prunablePeers(peerTimout time.Duration, minRecvRate int64, now time.Time) []p2p.ID {
-	prunable := make([]p2p.ID, 0)
+func (sc *scheduler) prunablePeers(peerTimout time.Duration, minRecvRate int64, now time.Time) []p2p.NodeID {
+	prunable := make([]p2p.NodeID, 0)
 	for peerID, peer := range sc.peers {
 		if peer.state != peerStateReady {
 			continue
@@ -366,7 +366,7 @@ func (sc *scheduler) setStateAtHeight(height int64, state blockState) {
 }
 
 // CONTRACT: peer exists and in Ready state.
-func (sc *scheduler) markReceived(peerID p2p.ID, height int64, size int64, now time.Time) error {
+func (sc *scheduler) markReceived(peerID p2p.NodeID, height int64, size int64, now time.Time) error {
 	peer := sc.peers[peerID]
 
 	if state := sc.getStateAtHeight(height); state != blockStatePending || sc.pendingBlocks[height] != peerID {
@@ -390,7 +390,7 @@ func (sc *scheduler) markReceived(peerID p2p.ID, height int64, size int64, now t
 	return nil
 }
 
-func (sc *scheduler) markPending(peerID p2p.ID, height int64, time time.Time) error {
+func (sc *scheduler) markPending(peerID p2p.NodeID, height int64, time time.Time) error {
 	state := sc.getStateAtHeight(height)
 	if state != blockStateNew {
 		return fmt.Errorf("block %d should be in blockStateNew but is %s", height, state)
@@ -472,7 +472,7 @@ func (sc *scheduler) nextHeightToSchedule() int64 {
 	return min
 }
 
-func (sc *scheduler) pendingFrom(peerID p2p.ID) []int64 {
+func (sc *scheduler) pendingFrom(peerID p2p.NodeID) []int64 {
 	var heights []int64
 	for height, pendingPeerID := range sc.pendingBlocks {
 		if pendingPeerID == peerID {
@@ -482,7 +482,7 @@ func (sc *scheduler) pendingFrom(peerID p2p.ID) []int64 {
 	return heights
 }
 
-func (sc *scheduler) selectPeer(height int64) (p2p.ID, error) {
+func (sc *scheduler) selectPeer(height int64) (p2p.NodeID, error) {
 	peers := sc.getPeersWithHeight(height)
 	if len(peers) == 0 {
 		return "", fmt.Errorf("cannot find peer for height %d", height)
@@ -490,7 +490,7 @@ func (sc *scheduler) selectPeer(height int64) (p2p.ID, error) {
 
 	// create a map from number of pending requests to a list
 	// of peers having that number of pending requests.
-	pendingFrom := make(map[int][]p2p.ID)
+	pendingFrom := make(map[int][]p2p.NodeID)
 	for _, peerID := range peers {
 		numPending := len(sc.pendingFrom(peerID))
 		pendingFrom[numPending] = append(pendingFrom[numPending], peerID)
@@ -509,7 +509,7 @@ func (sc *scheduler) selectPeer(height int64) (p2p.ID, error) {
 }
 
 // PeerByID is a list of peers sorted by peerID.
-type PeerByID []p2p.ID
+type PeerByID []p2p.NodeID
 
 func (peers PeerByID) Len() int {
 	return len(peers)

blockchain/v2/scheduler_test.go

@@ -20,9 +20,9 @@ type scTestParams struct {
 	initHeight    int64
 	height        int64
 	allB          []int64
-	pending       map[int64]p2p.ID
+	pending       map[int64]p2p.NodeID
 	pendingTime   map[int64]time.Time
-	received      map[int64]p2p.ID
+	received      map[int64]p2p.NodeID
 	peerTimeout   time.Duration
 	minRecvRate   int64
 	targetPending int
@@ -41,7 +41,7 @@ func verifyScheduler(sc *scheduler) {
 }
 
 func newTestScheduler(params scTestParams) *scheduler {
-	peers := make(map[p2p.ID]*scPeer)
+	peers := make(map[p2p.NodeID]*scPeer)
 	var maxHeight int64
 
 	initHeight := params.initHeight
@@ -54,8 +54,8 @@ func newTestScheduler(params scTestParams) *scheduler {
 	}
 
 	for id, peer := range params.peers {
-		peer.peerID = p2p.ID(id)
-		peers[p2p.ID(id)] = peer
+		peer.peerID = p2p.NodeID(id)
+		peers[p2p.NodeID(id)] = peer
 		if maxHeight < peer.height {
 			maxHeight = peer.height
 		}
@@ -122,7 +122,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "one ready peer",
 			sc: scheduler{
 				height: 3,
-				peers:  map[p2p.ID]*scPeer{"P1": {height: 6, state: peerStateReady}},
+				peers:  map[p2p.NodeID]*scPeer{"P1": {height: 6, state: peerStateReady}},
 			},
 			wantMax: 6,
 		},
@@ -130,7 +130,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "ready and removed peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[p2p.ID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {height: 4, state: peerStateReady},
 					"P2": {height: 10, state: peerStateRemoved}},
 			},
@@ -140,7 +140,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "removed peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[p2p.ID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {height: 4, state: peerStateRemoved},
 					"P2": {height: 10, state: peerStateRemoved}},
 			},
@@ -150,7 +150,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "new peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[p2p.ID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {base: -1, height: -1, state: peerStateNew},
 					"P2": {base: -1, height: -1, state: peerStateNew}},
 			},
@@ -160,7 +160,7 @@ func TestScMaxHeights(t *testing.T) {
 			name: "mixed peers",
 			sc: scheduler{
 				height: 1,
-				peers: map[p2p.ID]*scPeer{
+				peers: map[p2p.NodeID]*scPeer{
 					"P1": {height: -1, state: peerStateNew},
 					"P2": {height: 10, state: peerStateReady},
 					"P3": {height: 20, state: peerStateRemoved},
@@ -187,7 +187,7 @@ func TestScMaxHeights(t *testing.T) {
 func TestScEnsurePeer(t *testing.T) {
 
 	type args struct {
-		peerID p2p.ID
+		peerID p2p.NodeID
 	}
 	tests := []struct {
 		name       string
@@ -244,7 +244,7 @@ func TestScTouchPeer(t *testing.T) {
 	now := time.Now()
 
 	type args struct {
-		peerID p2p.ID
+		peerID p2p.NodeID
 		time   time.Time
 	}
 
@@ -316,13 +316,13 @@ func TestScPrunablePeers(t *testing.T) {
 		name       string
 		fields     scTestParams
 		args       args
-		wantResult []p2p.ID
+		wantResult []p2p.NodeID
 	}{
 		{
 			name:       "no peers",
 			fields:     scTestParams{peers: map[string]*scPeer{}},
 			args:       args{threshold: time.Second, time: now.Add(time.Second + time.Millisecond), minSpeed: 100},
-			wantResult: []p2p.ID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "mixed peers",
@@ -341,7 +341,7 @@ func TestScPrunablePeers(t *testing.T) {
 				"P6": {state: peerStateReady, lastTouched: now.Add(time.Second), lastRate: 90},
 			}},
 			args:       args{threshold: time.Second, time: now.Add(time.Second + time.Millisecond), minSpeed: 100},
-			wantResult: []p2p.ID{"P4", "P5", "P6"},
+			wantResult: []p2p.NodeID{"P4", "P5", "P6"},
 		},
 	}
 
@@ -361,7 +361,7 @@ func TestScPrunablePeers(t *testing.T) {
 func TestScRemovePeer(t *testing.T) {
 
 	type args struct {
-		peerID p2p.ID
+		peerID p2p.NodeID
 	}
 	tests := []struct {
 		name       string
@@ -424,13 +424,13 @@ func TestScRemovePeer(t *testing.T) {
 			fields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 				allB:    []int64{1, 2, 3},
-				pending: map[int64]p2p.ID{1: "P1"},
+				pending: map[int64]p2p.NodeID{1: "P1"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 3, state: peerStateRemoved}},
 				allB:    []int64{},
-				pending: map[int64]p2p.ID{},
+				pending: map[int64]p2p.NodeID{},
 			},
 		},
 		{
@@ -438,13 +438,13 @@ func TestScRemovePeer(t *testing.T) {
 			fields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 				allB:     []int64{1, 2, 3},
-				received: map[int64]p2p.ID{1: "P1"},
+				received: map[int64]p2p.NodeID{1: "P1"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 3, state: peerStateRemoved}},
 				allB:     []int64{},
-				received: map[int64]p2p.ID{},
+				received: map[int64]p2p.NodeID{},
 			},
 		},
 		{
@@ -452,15 +452,15 @@ func TestScRemovePeer(t *testing.T) {
 			fields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:     []int64{1, 2, 3, 4},
-				pending:  map[int64]p2p.ID{1: "P1", 3: "P1"},
-				received: map[int64]p2p.ID{2: "P1", 4: "P1"},
+				pending:  map[int64]p2p.NodeID{1: "P1", 3: "P1"},
+				received: map[int64]p2p.NodeID{2: "P1", 4: "P1"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 4, state: peerStateRemoved}},
 				allB:     []int64{},
-				pending:  map[int64]p2p.ID{},
-				received: map[int64]p2p.ID{},
+				pending:  map[int64]p2p.NodeID{},
+				received: map[int64]p2p.NodeID{},
 			},
 		},
 		{
@@ -471,8 +471,8 @@ func TestScRemovePeer(t *testing.T) {
 					"P2": {height: 6, state: peerStateReady},
 				},
 				allB:     []int64{1, 2, 3, 4, 5, 6},
-				pending:  map[int64]p2p.ID{1: "P1", 3: "P2", 6: "P1"},
-				received: map[int64]p2p.ID{2: "P1", 4: "P2", 5: "P2"},
+				pending:  map[int64]p2p.NodeID{1: "P1", 3: "P2", 6: "P1"},
+				received: map[int64]p2p.NodeID{2: "P1", 4: "P2", 5: "P2"},
 			},
 			args: args{peerID: "P1"},
 			wantFields: scTestParams{
@@ -481,8 +481,8 @@ func TestScRemovePeer(t *testing.T) {
 					"P2": {height: 6, state: peerStateReady},
 				},
 				allB:     []int64{1, 2, 3, 4, 5, 6},
-				pending:  map[int64]p2p.ID{3: "P2"},
-				received: map[int64]p2p.ID{4: "P2", 5: "P2"},
+				pending:  map[int64]p2p.NodeID{3: "P2"},
+				received: map[int64]p2p.NodeID{4: "P2", 5: "P2"},
 			},
 		},
 	}
@@ -501,7 +501,7 @@ func TestScRemovePeer(t *testing.T) {
 func TestScSetPeerRange(t *testing.T) {
 
 	type args struct {
-		peerID p2p.ID
+		peerID p2p.NodeID
 		base   int64
 		height int64
 	}
@@ -622,25 +622,25 @@ func TestScGetPeersWithHeight(t *testing.T) {
 		name       string
 		fields     scTestParams
 		args       args
-		wantResult []p2p.ID
+		wantResult []p2p.NodeID
 	}{
 		{
 			name:       "no peers",
 			fields:     scTestParams{peers: map[string]*scPeer{}},
 			args:       args{height: 10},
-			wantResult: []p2p.ID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name:       "only new peers",
 			fields:     scTestParams{peers: map[string]*scPeer{"P1": {height: -1, state: peerStateNew}}},
 			args:       args{height: 10},
-			wantResult: []p2p.ID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name:       "only Removed peers",
 			fields:     scTestParams{peers: map[string]*scPeer{"P1": {height: 4, state: peerStateRemoved}}},
 			args:       args{height: 2},
-			wantResult: []p2p.ID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "one Ready shorter peer",
@@ -649,7 +649,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:  []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 5},
-			wantResult: []p2p.ID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "one Ready equal peer",
@@ -658,7 +658,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:  []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []p2p.ID{"P1"},
+			wantResult: []p2p.NodeID{"P1"},
 		},
 		{
 			name: "one Ready higher peer",
@@ -668,7 +668,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:          []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []p2p.ID{"P1"},
+			wantResult: []p2p.NodeID{"P1"},
 		},
 		{
 			name: "one Ready higher peer at base",
@@ -678,7 +678,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:          []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []p2p.ID{"P1"},
+			wantResult: []p2p.NodeID{"P1"},
 		},
 		{
 			name: "one Ready higher peer with higher base",
@@ -688,7 +688,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB:          []int64{1, 2, 3, 4},
 			},
 			args:       args{height: 4},
-			wantResult: []p2p.ID{},
+			wantResult: []p2p.NodeID{},
 		},
 		{
 			name: "multiple mixed peers",
@@ -703,7 +703,7 @@ func TestScGetPeersWithHeight(t *testing.T) {
 				allB: []int64{8, 9, 10, 11},
 			},
 			args:       args{height: 8},
-			wantResult: []p2p.ID{"P2", "P5"},
+			wantResult: []p2p.NodeID{"P2", "P5"},
 		},
 	}
 
@@ -725,7 +725,7 @@ func TestScMarkPending(t *testing.T) {
 	now := time.Now()
 
 	type args struct {
-		peerID p2p.ID
+		peerID p2p.NodeID
 		height int64
 		tm     time.Time
 	}
@@ -821,14 +821,14 @@ func TestScMarkPending(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]p2p.ID{1: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1"},
 				pendingTime: map[int64]time.Time{1: now},
 			},
 			args: args{peerID: "P1", height: 2, tm: now.Add(time.Millisecond)},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]p2p.ID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now.Add(time.Millisecond)},
 			},
 		},
@@ -851,7 +851,7 @@ func TestScMarkReceived(t *testing.T) {
 	now := time.Now()
 
 	type args struct {
-		peerID p2p.ID
+		peerID p2p.NodeID
 		height int64
 		size   int64
 		tm     time.Time
@@ -891,7 +891,7 @@ func TestScMarkReceived(t *testing.T) {
 					"P2": {height: 4, state: peerStateReady},
 				},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]p2p.ID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
+				pending: map[int64]p2p.NodeID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now},
 			wantFields: scTestParams{
@@ -900,7 +900,7 @@ func TestScMarkReceived(t *testing.T) {
 					"P2": {height: 4, state: peerStateReady},
 				},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]p2p.ID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
+				pending: map[int64]p2p.NodeID{1: "P1", 2: "P2", 3: "P2", 4: "P1"},
 			},
 			wantErr: true,
 		},
@@ -909,13 +909,13 @@ func TestScMarkReceived(t *testing.T) {
 			fields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]p2p.ID{},
+				pending: map[int64]p2p.NodeID{},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now},
 			wantFields: scTestParams{
 				peers:   map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:    []int64{1, 2, 3, 4},
-				pending: map[int64]p2p.ID{},
+				pending: map[int64]p2p.NodeID{},
 			},
 			wantErr: true,
 		},
@@ -924,14 +924,14 @@ func TestScMarkReceived(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]p2p.ID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now.Add(time.Second)},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]p2p.ID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now.Add(time.Second)},
 			},
 			wantErr: true,
@@ -941,16 +941,16 @@ func TestScMarkReceived(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]p2p.ID{1: "P1", 2: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now},
 			},
 			args: args{peerID: "P1", height: 2, size: 1000, tm: now.Add(time.Millisecond)},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]p2p.ID{1: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1"},
 				pendingTime: map[int64]time.Time{1: now},
-				received:    map[int64]p2p.ID{2: "P1"},
+				received:    map[int64]p2p.NodeID{2: "P1"},
 			},
 		},
 	}
@@ -991,7 +991,7 @@ func TestScMarkProcessed(t *testing.T) {
 				height:        2,
 				peers:         map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:          []int64{2},
-				pending:       map[int64]p2p.ID{2: "P1"},
+				pending:       map[int64]p2p.NodeID{2: "P1"},
 				pendingTime:   map[int64]time.Time{2: now},
 				targetPending: 1,
 			},
@@ -1009,15 +1009,15 @@ func TestScMarkProcessed(t *testing.T) {
 				height:      1,
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{1, 2},
-				pending:     map[int64]p2p.ID{2: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1"},
 				pendingTime: map[int64]time.Time{2: now},
-				received:    map[int64]p2p.ID{1: "P1"}},
+				received:    map[int64]p2p.NodeID{1: "P1"}},
 			args: args{height: 1},
 			wantFields: scTestParams{
 				height:      2,
 				peers:       map[string]*scPeer{"P1": {height: 2, state: peerStateReady}},
 				allB:        []int64{2},
-				pending:     map[int64]p2p.ID{2: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1"},
 				pendingTime: map[int64]time.Time{2: now}},
 		},
 	}
@@ -1101,7 +1101,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]p2p.ID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now, 3: now, 4: now},
 			},
 			wantResult: false,
@@ -1111,7 +1111,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 			fields: scTestParams{
 				peers:    map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:     []int64{1, 2, 3, 4},
-				received: map[int64]p2p.ID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				received: map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 			},
 			wantResult: false,
 		},
@@ -1122,7 +1122,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 				peers: map[string]*scPeer{
 					"P1": {height: 4, state: peerStateReady}},
 				allB:     []int64{4},
-				received: map[int64]p2p.ID{4: "P1"},
+				received: map[int64]p2p.NodeID{4: "P1"},
 			},
 			wantResult: true,
 		},
@@ -1131,7 +1131,7 @@ func TestScAllBlocksProcessed(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]p2p.ID{2: "P1", 4: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1", 4: "P1"},
 				pendingTime: map[int64]time.Time{2: now, 4: now},
 			},
 			wantResult: false,
@@ -1179,7 +1179,7 @@ func TestScNextHeightToSchedule(t *testing.T) {
 				initHeight:  1,
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]p2p.ID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 				pendingTime: map[int64]time.Time{1: now, 2: now, 3: now, 4: now},
 			},
 			wantHeight: -1,
@@ -1190,7 +1190,7 @@ func TestScNextHeightToSchedule(t *testing.T) {
 				initHeight: 1,
 				peers:      map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:       []int64{1, 2, 3, 4},
-				received:   map[int64]p2p.ID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
+				received:   map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1", 4: "P1"},
 			},
 			wantHeight: -1,
 		},
@@ -1209,7 +1209,7 @@ func TestScNextHeightToSchedule(t *testing.T) {
 				initHeight:  1,
 				peers:       map[string]*scPeer{"P1": {height: 4, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4},
-				pending:     map[int64]p2p.ID{2: "P1"},
+				pending:     map[int64]p2p.NodeID{2: "P1"},
 				pendingTime: map[int64]time.Time{2: now},
 			},
 			wantHeight: 1,
@@ -1239,7 +1239,7 @@ func TestScSelectPeer(t *testing.T) {
 		name       string
 		fields     scTestParams
 		args       args
-		wantResult p2p.ID
+		wantResult p2p.NodeID
 		wantError  bool
 	}{
 		{
@@ -1307,7 +1307,7 @@ func TestScSelectPeer(t *testing.T) {
 					"P1": {height: 8, state: peerStateReady},
 					"P2": {height: 9, state: peerStateReady}},
 				allB: []int64{4, 5, 6, 7, 8, 9},
-				pending: map[int64]p2p.ID{
+				pending: map[int64]p2p.NodeID{
 					4: "P1", 6: "P1",
 					5: "P2",
 				},
@@ -1323,7 +1323,7 @@ func TestScSelectPeer(t *testing.T) {
 					"P1": {height: 15, state: peerStateReady},
 					"P3": {height: 15, state: peerStateReady}},
 				allB: []int64{1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
-				pending: map[int64]p2p.ID{
+				pending: map[int64]p2p.NodeID{
 					1: "P1", 2: "P1",
 					3: "P3", 4: "P3",
 					5: "P2", 6: "P2",
@@ -1373,6 +1373,9 @@ func checkScResults(t *testing.T, wantErr bool, err error, wantEvent Event, even
 		t.Errorf("error = %v, wantErr %v", err, wantErr)
 		return
 	}
+	if !assert.IsType(t, wantEvent, event) {
+		t.Log(fmt.Sprintf("Wrong type received, got: %v", event))
+	}
 	switch wantEvent := wantEvent.(type) {
 	case scPeerError:
 		assert.Equal(t, wantEvent.peerID, event.(scPeerError).peerID)
@@ -1389,7 +1392,7 @@ func TestScHandleBlockResponse(t *testing.T) {
 	now := time.Now()
 	block6FromP1 := bcBlockResponse{
 		time:   now.Add(time.Millisecond),
-		peerID: p2p.ID("P1"),
+		peerID: p2p.NodeID("P1"),
 		size:   100,
 		block:  makeScBlock(6),
 	}
@@ -1430,7 +1433,7 @@ func TestScHandleBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P2"},
+				pending:     map[int64]p2p.NodeID{6: "P2"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: block6FromP1},
@@ -1441,7 +1444,7 @@ func TestScHandleBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now.Add(time.Second)},
 			},
 			args:      args{event: block6FromP1},
@@ -1452,11 +1455,11 @@ func TestScHandleBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: block6FromP1},
-			wantEvent: scBlockReceived{peerID: "P1", block: makeScBlock(6)},
+			wantEvent: scBlockReceived{peerID: "P1", block: block6FromP1.block},
 		},
 	}
 
@@ -1474,7 +1477,7 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 	now := time.Now()
 	noBlock6FromP1 := bcNoBlockResponse{
 		time:   now.Add(time.Millisecond),
-		peerID: p2p.ID("P1"),
+		peerID: p2p.NodeID("P1"),
 		height: 6,
 	}
 
@@ -1510,14 +1513,14 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P2"},
+				pending:     map[int64]p2p.NodeID{6: "P2"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			wantEvent: noOpEvent{},
 			wantFields: scTestParams{
 				peers:       map[string]*scPeer{"P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P2"},
+				pending:     map[int64]p2p.NodeID{6: "P2"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 		},
@@ -1526,7 +1529,7 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 			fields: scTestParams{
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			wantEvent:  scPeerError{peerID: "P1", reason: fmt.Errorf("some error")},
@@ -1549,7 +1552,7 @@ func TestScHandleNoBlockResponse(t *testing.T) {
 func TestScHandleBlockProcessed(t *testing.T) {
 	now := time.Now()
 	processed6FromP1 := pcBlockProcessed{
-		peerID: p2p.ID("P1"),
+		peerID: p2p.NodeID("P1"),
 		height: 6,
 	}
 
@@ -1576,7 +1579,7 @@ func TestScHandleBlockProcessed(t *testing.T) {
 				initHeight:  6,
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: processed6FromP1},
@@ -1588,7 +1591,7 @@ func TestScHandleBlockProcessed(t *testing.T) {
 				initHeight: 6,
 				peers:      map[string]*scPeer{"P1": {height: 7, state: peerStateReady}},
 				allB:       []int64{6, 7},
-				received:   map[int64]p2p.ID{6: "P1", 7: "P1"},
+				received:   map[int64]p2p.NodeID{6: "P1", 7: "P1"},
 			},
 			args:      args{event: processed6FromP1},
 			wantEvent: scFinishedEv{},
@@ -1599,8 +1602,8 @@ func TestScHandleBlockProcessed(t *testing.T) {
 				initHeight: 6,
 				peers:      map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:       []int64{6, 7, 8},
-				pending:    map[int64]p2p.ID{7: "P1", 8: "P1"},
-				received:   map[int64]p2p.ID{6: "P1"},
+				pending:    map[int64]p2p.NodeID{7: "P1", 8: "P1"},
+				received:   map[int64]p2p.NodeID{6: "P1"},
 			},
 			args:      args{event: processed6FromP1},
 			wantEvent: noOpEvent{},
@@ -1643,7 +1646,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight:  6,
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}},
 				allB:        []int64{6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 10, firstPeerID: "P1", secondPeerID: "P1"}},
@@ -1655,7 +1658,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight:  6,
 				peers:       map[string]*scPeer{"P1": {height: 8, state: peerStateReady}, "P2": {height: 8, state: peerStateReady}},
 				allB:        []int64{6, 7, 8},
-				pending:     map[int64]p2p.ID{6: "P1"},
+				pending:     map[int64]p2p.NodeID{6: "P1"},
 				pendingTime: map[int64]time.Time{6: now},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 10, firstPeerID: "P1", secondPeerID: "P1"}},
@@ -1667,7 +1670,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight: 6,
 				peers:      map[string]*scPeer{"P1": {height: 7, state: peerStateReady}},
 				allB:       []int64{6, 7},
-				received:   map[int64]p2p.ID{6: "P1", 7: "P1"},
+				received:   map[int64]p2p.NodeID{6: "P1", 7: "P1"},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 7, firstPeerID: "P1", secondPeerID: "P1"}},
 			wantEvent: scFinishedEv{},
@@ -1678,8 +1681,8 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 				initHeight: 5,
 				peers:      map[string]*scPeer{"P1": {height: 8, state: peerStateReady}, "P2": {height: 8, state: peerStateReady}},
 				allB:       []int64{5, 6, 7, 8},
-				pending:    map[int64]p2p.ID{7: "P1", 8: "P1"},
-				received:   map[int64]p2p.ID{5: "P1", 6: "P1"},
+				pending:    map[int64]p2p.NodeID{7: "P1", 8: "P1"},
+				received:   map[int64]p2p.NodeID{5: "P1", 6: "P1"},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 5, firstPeerID: "P1", secondPeerID: "P1"}},
 			wantEvent: noOpEvent{},
@@ -1694,8 +1697,8 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 					"P3": {height: 8, state: peerStateReady},
 				},
 				allB:     []int64{5, 6, 7, 8},
-				pending:  map[int64]p2p.ID{7: "P1", 8: "P1"},
-				received: map[int64]p2p.ID{5: "P1", 6: "P1"},
+				pending:  map[int64]p2p.NodeID{7: "P1", 8: "P1"},
+				received: map[int64]p2p.NodeID{5: "P1", 6: "P1"},
 			},
 			args:      args{event: pcBlockVerificationFailure{height: 5, firstPeerID: "P1", secondPeerID: "P2"}},
 			wantEvent: noOpEvent{},
@@ -1714,7 +1717,7 @@ func TestScHandleBlockVerificationFailure(t *testing.T) {
 
 func TestScHandleAddNewPeer(t *testing.T) {
 	addP1 := bcAddNewPeer{
-		peerID: p2p.ID("P1"),
+		peerID: p2p.NodeID("P1"),
 	}
 	type args struct {
 		event bcAddNewPeer
@@ -1825,7 +1828,7 @@ func TestScHandleTryPrunePeer(t *testing.T) {
 				allB:        []int64{1, 2, 3, 4, 5, 6, 7},
 				peerTimeout: time.Second},
 			args:      args{event: pruneEv},
-			wantEvent: scPeersPruned{peers: []p2p.ID{"P4", "P5", "P6"}},
+			wantEvent: scPeersPruned{peers: []p2p.NodeID{"P4", "P5", "P6"}},
 		},
 		{
 			name: "mixed peers, finish after pruning",
@@ -1923,7 +1926,7 @@ func TestScHandleTrySchedule(t *testing.T) {
 					"P1": {height: 4, state: peerStateReady},
 					"P2": {height: 5, state: peerStateReady}},
 				allB: []int64{1, 2, 3, 4, 5},
-				pending: map[int64]p2p.ID{
+				pending: map[int64]p2p.NodeID{
 					1: "P1", 2: "P1",
 					3: "P2",
 				},
@@ -1941,7 +1944,7 @@ func TestScHandleTrySchedule(t *testing.T) {
 					"P1": {height: 8, state: peerStateReady},
 					"P3": {height: 8, state: peerStateReady}},
 				allB: []int64{1, 2, 3, 4, 5, 6, 7, 8},
-				pending: map[int64]p2p.ID{
+				pending: map[int64]p2p.NodeID{
 					1: "P1", 2: "P1",
 					3: "P3", 4: "P3",
 					5: "P2", 6: "P2",
@@ -2043,6 +2046,8 @@ func TestScHandle(t *testing.T) {
 		priorityNormal
 	}
 
+	block1, block2, block3 := makeScBlock(1), makeScBlock(2), makeScBlock(3)
+
 	t0 := time.Now()
 	tick := make([]time.Time, 100)
 	for i := range tick {
@@ -2101,7 +2106,7 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]p2p.ID{1: "P1"},
+						pending:     map[int64]p2p.NodeID{1: "P1"},
 						pendingTime: map[int64]time.Time{1: tick[1]},
 						height:      1,
 					},
@@ -2113,7 +2118,7 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]p2p.ID{1: "P1", 2: "P1"},
+						pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 						pendingTime: map[int64]time.Time{1: tick[1], 2: tick[2]},
 						height:      1,
 					},
@@ -2125,67 +2130,67 @@ func TestScHandle(t *testing.T) {
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]p2p.ID{1: "P1", 2: "P1", 3: "P1"},
+						pending:     map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1"},
 						pendingTime: map[int64]time.Time{1: tick[1], 2: tick[2], 3: tick[3]},
 						height:      1,
 					},
 				},
 				{ // block response 1
-					args:      args{event: bcBlockResponse{peerID: "P1", time: tick[4], size: 100, block: makeScBlock(1)}},
-					wantEvent: scBlockReceived{peerID: "P1", block: makeScBlock(1)},
+					args:      args{event: bcBlockResponse{peerID: "P1", time: tick[4], size: 100, block: block1}},
+					wantEvent: scBlockReceived{peerID: "P1", block: block1},
 					wantSc: &scTestParams{
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[4]}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]p2p.ID{2: "P1", 3: "P1"},
+						pending:     map[int64]p2p.NodeID{2: "P1", 3: "P1"},
 						pendingTime: map[int64]time.Time{2: tick[2], 3: tick[3]},
-						received:    map[int64]p2p.ID{1: "P1"},
+						received:    map[int64]p2p.NodeID{1: "P1"},
 						height:      1,
 					},
 				},
 				{ // block response 2
-					args:      args{event: bcBlockResponse{peerID: "P1", time: tick[5], size: 100, block: makeScBlock(2)}},
-					wantEvent: scBlockReceived{peerID: "P1", block: makeScBlock(2)},
+					args:      args{event: bcBlockResponse{peerID: "P1", time: tick[5], size: 100, block: block2}},
+					wantEvent: scBlockReceived{peerID: "P1", block: block2},
 					wantSc: &scTestParams{
 						startTime:   now,
 						peers:       map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[5]}},
 						allB:        []int64{1, 2, 3},
-						pending:     map[int64]p2p.ID{3: "P1"},
+						pending:     map[int64]p2p.NodeID{3: "P1"},
 						pendingTime: map[int64]time.Time{3: tick[3]},
-						received:    map[int64]p2p.ID{1: "P1", 2: "P1"},
+						received:    map[int64]p2p.NodeID{1: "P1", 2: "P1"},
 						height:      1,
 					},
 				},
 				{ // block response 3
-					args:      args{event: bcBlockResponse{peerID: "P1", time: tick[6], size: 100, block: makeScBlock(3)}},
-					wantEvent: scBlockReceived{peerID: "P1", block: makeScBlock(3)},
+					args:      args{event: bcBlockResponse{peerID: "P1", time: tick[6], size: 100, block: block3}},
+					wantEvent: scBlockReceived{peerID: "P1", block: block3},
 					wantSc: &scTestParams{
 						startTime: now,
 						peers:     map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:      []int64{1, 2, 3},
-						received:  map[int64]p2p.ID{1: "P1", 2: "P1", 3: "P1"},
+						received:  map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1"},
 						height:    1,
 					},
 				},
 				{ // processed block 1
-					args:      args{event: pcBlockProcessed{peerID: p2p.ID("P1"), height: 1}},
+					args:      args{event: pcBlockProcessed{peerID: p2p.NodeID("P1"), height: 1}},
 					wantEvent: noOpEvent{},
 					wantSc: &scTestParams{
 						startTime: now,
 						peers:     map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:      []int64{2, 3},
-						received:  map[int64]p2p.ID{2: "P1", 3: "P1"},
+						received:  map[int64]p2p.NodeID{2: "P1", 3: "P1"},
 						height:    2,
 					},
 				},
 				{ // processed block 2
-					args:      args{event: pcBlockProcessed{peerID: p2p.ID("P1"), height: 2}},
+					args:      args{event: pcBlockProcessed{peerID: p2p.NodeID("P1"), height: 2}},
 					wantEvent: scFinishedEv{},
 					wantSc: &scTestParams{
 						startTime: now,
 						peers:     map[string]*scPeer{"P1": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:      []int64{3},
-						received:  map[int64]p2p.ID{3: "P1"},
+						received:  map[int64]p2p.NodeID{3: "P1"},
 						height:    3,
 					},
 				},
@@ -2201,7 +2206,7 @@ func TestScHandle(t *testing.T) {
 							"P1": {height: 4, state: peerStateReady, lastTouched: tick[6]},
 							"P2": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:     []int64{1, 2, 3, 4},
-						received: map[int64]p2p.ID{1: "P1", 2: "P1", 3: "P1"},
+						received: map[int64]p2p.NodeID{1: "P1", 2: "P1", 3: "P1"},
 						height:   1,
 					},
 					args:      args{event: pcBlockVerificationFailure{height: 1, firstPeerID: "P1", secondPeerID: "P1"}},
@@ -2212,7 +2217,7 @@ func TestScHandle(t *testing.T) {
 							"P1": {height: 4, state: peerStateRemoved, lastTouched: tick[6]},
 							"P2": {height: 3, state: peerStateReady, lastTouched: tick[6]}},
 						allB:     []int64{1, 2, 3},
-						received: map[int64]p2p.ID{},
+						received: map[int64]p2p.NodeID{},
 						height:   1,
 					},
 				},

buf.gen.yaml

@@ -0,0 +1,13 @@
+# The version of the generation template.
+# Required.
+# The only currently-valid value is v1beta1.
+version: v1beta1
+
+# The plugins to run.
+plugins:
+  # The name of the plugin.
+  - name: gogofaster
+    # The the relative output directory.
+    out: proto
+    # Any options to provide to the plugin.
+    opt: Mgoogle/protobuf/timestamp.proto=github.com/gogo/protobuf/types,Mgoogle/protobuf/duration.proto=github.com/golang/protobuf/ptypes/duration,plugins=grpc,paths=source_relative

buf.yaml

@@ -1,3 +1,5 @@
+version: v1beta1
+
 build:
   roots:
     - proto

cmd/priv_val_server/main.go

@@ -1,24 +1,50 @@
 package main
 
 import (
+	"context"
+	"crypto/tls"
+	"crypto/x509"
 	"flag"
+	"fmt"
+	"io/ioutil"
+	"net"
+	"net/http"
 	"os"
 	"time"
 
-	"github.com/tendermint/tendermint/crypto/ed25519"
+	grpc_prometheus "github.com/grpc-ecosystem/go-grpc-prometheus"
+	"github.com/prometheus/client_golang/prometheus"
+	"github.com/prometheus/client_golang/prometheus/promhttp"
+	"google.golang.org/grpc"
+	"google.golang.org/grpc/credentials"
+
 	"github.com/tendermint/tendermint/libs/log"
 	tmnet "github.com/tendermint/tendermint/libs/net"
 	tmos "github.com/tendermint/tendermint/libs/os"
-
 	"github.com/tendermint/tendermint/privval"
+	grpcprivval "github.com/tendermint/tendermint/privval/grpc"
+	privvalproto "github.com/tendermint/tendermint/proto/tendermint/privval"
+)
+
+var (
+	// Create a metrics registry.
+	reg = prometheus.NewRegistry()
+
+	// Create some standard server metrics.
+	grpcMetrics = grpc_prometheus.NewServerMetrics()
 )
 
 func main() {
 	var (
-		addr             = flag.String("addr", ":26659", "Address of client to connect to")
+		addr             = flag.String("addr", "127.0.0.1:26659", "Address to listen on (host:port)")
 		chainID          = flag.String("chain-id", "mychain", "chain id")
 		privValKeyPath   = flag.String("priv-key", "", "priv val key file path")
 		privValStatePath = flag.String("priv-state", "", "priv val state file path")
+		insecure         = flag.Bool("insecure", false, "allow server to run insecurely (no TLS)")
+		certFile         = flag.String("certfile", "", "absolute path to server certificate")
+		keyFile          = flag.String("keyfile", "", "absolute path to server key")
+		rootCA           = flag.String("rootcafile", "", "absolute path to root CA")
+		prometheusAddr   = flag.String("prometheus-addr", "", "address for prometheus endpoint (host:port)")
 
 		logger = log.NewTMLogger(
 			log.NewSyncWriter(os.Stdout),
@@ -32,39 +58,106 @@ func main() {
 		"chainID", *chainID,
 		"privKeyPath", *privValKeyPath,
 		"privStatePath", *privValStatePath,
+		"insecure", *insecure,
+		"certFile", *certFile,
+		"keyFile", *keyFile,
+		"rootCA", *rootCA,
 	)
 
 	pv := privval.LoadFilePV(*privValKeyPath, *privValStatePath)
 
-	var dialer privval.SocketDialer
+	opts := []grpc.ServerOption{}
+	if !*insecure {
+		certificate, err := tls.LoadX509KeyPair(*certFile, *keyFile)
+		if err != nil {
+			fmt.Fprintf(os.Stderr, "failed to load X509 key pair: %v", err)
+			os.Exit(1)
+		}
+
+		certPool := x509.NewCertPool()
+		bs, err := ioutil.ReadFile(*rootCA)
+		if err != nil {
+			fmt.Fprintf(os.Stderr, "failed to read client ca cert: %s", err)
+			os.Exit(1)
+		}
+
+		if ok := certPool.AppendCertsFromPEM(bs); !ok {
+			fmt.Fprintf(os.Stderr, "failed to append client certs")
+			os.Exit(1)
+		}
+
+		tlsConfig := &tls.Config{
+			ClientAuth:   tls.RequireAndVerifyClientCert,
+			Certificates: []tls.Certificate{certificate},
+			ClientCAs:    certPool,
+			MinVersion:   tls.VersionTLS13,
+		}
+
+		creds := grpc.Creds(credentials.NewTLS(tlsConfig))
+		opts = append(opts, creds)
+		logger.Info("SignerServer: Creating security credentials")
+	} else {
+		logger.Info("SignerServer: You are using an insecure gRPC connection!")
+	}
+
+	// add prometheus metrics for unary RPC calls
+	opts = append(opts, grpc.UnaryInterceptor(grpc_prometheus.UnaryServerInterceptor))
+
+	ss := grpcprivval.NewSignerServer(*chainID, pv, logger)
+
 	protocol, address := tmnet.ProtocolAndAddress(*addr)
-	switch protocol {
-	case "unix":
-		dialer = privval.DialUnixFn(address)
-	case "tcp":
-		connTimeout := 3 * time.Second // TODO
-		dialer = privval.DialTCPFn(address, connTimeout, ed25519.GenPrivKey())
-	default:
-		logger.Error("Unknown protocol", "protocol", protocol)
+
+	lis, err := net.Listen(protocol, address)
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "SignerServer: Failed to listen %v", err)
 		os.Exit(1)
 	}
 
-	sd := privval.NewSignerDialerEndpoint(logger, dialer)
-	ss := privval.NewSignerServer(sd, *chainID, pv)
+	s := grpc.NewServer(opts...)
 
-	err := ss.Start()
-	if err != nil {
-		panic(err)
+	privvalproto.RegisterPrivValidatorAPIServer(s, ss)
+
+	var httpSrv *http.Server
+	if *prometheusAddr != "" {
+		httpSrv = registerPrometheus(*prometheusAddr, s)
+	}
+
+	logger.Info("SignerServer: Starting grpc server")
+	if err := s.Serve(lis); err != nil {
+		fmt.Fprintf(os.Stderr, "Unable to listen on port %s: %v", *addr, err)
+		os.Exit(1)
 	}
 
 	// Stop upon receiving SIGTERM or CTRL-C.
 	tmos.TrapSignal(logger, func() {
-		err := ss.Stop()
-		if err != nil {
-			panic(err)
+		logger.Debug("SignerServer: calling Close")
+		if *prometheusAddr != "" {
+			ctx, cancel := context.WithTimeout(context.Background(), 1*time.Second)
+			defer cancel()
+			if err := httpSrv.Shutdown(ctx); err != nil {
+				fmt.Fprintf(os.Stderr, "Unable to stop http server: %v", err)
+				os.Exit(1)
+			}
 		}
+		s.GracefulStop()
 	})
 
 	// Run forever.
 	select {}
 }
+
+func registerPrometheus(addr string, s *grpc.Server) *http.Server {
+	// Initialize all metrics.
+	grpcMetrics.InitializeMetrics(s)
+	// create http server to serve prometheus
+	httpServer := &http.Server{Handler: promhttp.HandlerFor(reg, promhttp.HandlerOpts{}), Addr: addr}
+
+	go func() {
+		if err := httpServer.ListenAndServe(); err != nil {
+			fmt.Fprintf(os.Stderr, "Unable to start a http server: %v", err)
+			os.Exit(1)
+		}
+	}()
+
+	return httpServer
+}

cmd/tendermint/commands/gen_node_key.go

@@ -5,30 +5,30 @@ import (
 
 	"github.com/spf13/cobra"
 
-	tmos "github.com/tendermint/tendermint/libs/os"
+	tmjson "github.com/tendermint/tendermint/libs/json"
 	"github.com/tendermint/tendermint/p2p"
 )
 
-// GenNodeKeyCmd allows the generation of a node key. It prints node's ID to
-// the standard output.
+// GenNodeKeyCmd allows the generation of a node key. It prints JSON-encoded
+// NodeKey to the standard output.
 var GenNodeKeyCmd = &cobra.Command{
 	Use:     "gen-node-key",
 	Aliases: []string{"gen_node_key"},
-	Short:   "Generate a node key for this node and print its ID",
-	PreRun:  deprecateSnakeCase,
+	Short:   "Generate a new node key",
 	RunE:    genNodeKey,
+	PreRun:  deprecateSnakeCase,
 }
 
 func genNodeKey(cmd *cobra.Command, args []string) error {
-	nodeKeyFile := config.NodeKeyFile()
-	if tmos.FileExists(nodeKeyFile) {
-		return fmt.Errorf("node key at %s already exists", nodeKeyFile)
+	nodeKey := p2p.GenNodeKey()
+
+	bz, err := tmjson.Marshal(nodeKey)
+	if err != nil {
+		return fmt.Errorf("nodeKey -> json: %w", err)
 	}
 
-	nodeKey, err := p2p.LoadOrGenNodeKey(nodeKeyFile)
-	if err != nil {
-		return err
-	}
-	fmt.Println(nodeKey.ID())
+	fmt.Printf(`%v
+`, string(bz))
+
 	return nil
 }

cmd/tendermint/commands/gen_validator.go

@@ -7,6 +7,7 @@ import (
 
 	tmjson "github.com/tendermint/tendermint/libs/json"
 	"github.com/tendermint/tendermint/privval"
+	"github.com/tendermint/tendermint/types"
 )
 
 // GenValidatorCmd allows the generation of a keypair for a
@@ -15,16 +16,28 @@ var GenValidatorCmd = &cobra.Command{
 	Use:     "gen-validator",
 	Aliases: []string{"gen_validator"},
 	Short:   "Generate new validator keypair",
+	RunE:    genValidator,
 	PreRun:  deprecateSnakeCase,
-	Run:     genValidator,
 }
 
-func genValidator(cmd *cobra.Command, args []string) {
-	pv := privval.GenFilePV("", "")
+func init() {
+	GenValidatorCmd.Flags().StringVar(&keyType, "key", types.ABCIPubKeyTypeEd25519,
+		"Key type to generate privval file with. Options: ed25519, secp256k1")
+}
+
+func genValidator(cmd *cobra.Command, args []string) error {
+	pv, err := privval.GenFilePV("", "", keyType)
+	if err != nil {
+		return err
+	}
+
 	jsbz, err := tmjson.Marshal(pv)
 	if err != nil {
-		panic(err)
+		return fmt.Errorf("validator -> json: %w", err)
 	}
+
 	fmt.Printf(`%v
 `, string(jsbz))
+
+	return nil
 }

cmd/tendermint/commands/init.go

@@ -10,6 +10,7 @@ import (
 	tmrand "github.com/tendermint/tendermint/libs/rand"
 	"github.com/tendermint/tendermint/p2p"
 	"github.com/tendermint/tendermint/privval"
+	tmproto "github.com/tendermint/tendermint/proto/tendermint/types"
 	"github.com/tendermint/tendermint/types"
 	tmtime "github.com/tendermint/tendermint/types/time"
 )
@@ -21,6 +22,15 @@ var InitFilesCmd = &cobra.Command{
 	RunE:  initFiles,
 }
 
+var (
+	keyType string
+)
+
+func init() {
+	InitFilesCmd.Flags().StringVar(&keyType, "key", types.ABCIPubKeyTypeEd25519,
+		"Key type to generate privval file with. Options: ed25519, secp256k1")
+}
+
 func initFiles(cmd *cobra.Command, args []string) error {
 	return initFilesWithConfig(config)
 }
@@ -29,13 +39,19 @@ func initFilesWithConfig(config *cfg.Config) error {
 	// private validator
 	privValKeyFile := config.PrivValidatorKeyFile()
 	privValStateFile := config.PrivValidatorStateFile()
-	var pv *privval.FilePV
+	var (
+		pv  *privval.FilePV
+		err error
+	)
 	if tmos.FileExists(privValKeyFile) {
 		pv = privval.LoadFilePV(privValKeyFile, privValStateFile)
 		logger.Info("Found private validator", "keyFile", privValKeyFile,
 			"stateFile", privValStateFile)
 	} else {
-		pv = privval.GenFilePV(privValKeyFile, privValStateFile)
+		pv, err = privval.GenFilePV(privValKeyFile, privValStateFile, keyType)
+		if err != nil {
+			return err
+		}
 		pv.Save()
 		logger.Info("Generated private validator", "keyFile", privValKeyFile,
 			"stateFile", privValStateFile)
@@ -56,11 +72,17 @@ func initFilesWithConfig(config *cfg.Config) error {
 	if tmos.FileExists(genFile) {
 		logger.Info("Found genesis file", "path", genFile)
 	} else {
+
 		genDoc := types.GenesisDoc{
 			ChainID:         fmt.Sprintf("test-chain-%v", tmrand.Str(6)),
 			GenesisTime:     tmtime.Now(),
 			ConsensusParams: types.DefaultConsensusParams(),
 		}
+		if keyType == "secp256k1" {
+			genDoc.ConsensusParams.Validator = tmproto.ValidatorParams{
+				PubKeyTypes: []string{types.ABCIPubKeyTypeSecp256k1},
+			}
+		}
 		pubKey, err := pv.GetPubKey()
 		if err != nil {
 			return fmt.Errorf("can't get pubkey: %w", err)

cmd/tendermint/commands/light.go

@@ -8,6 +8,7 @@ import (
 	"net/http"
 	"os"
 	"path/filepath"
+	"regexp"
 	"strings"
 	"time"
 
@@ -15,6 +16,7 @@ import (
 
 	dbm "github.com/tendermint/tm-db"
 
+	"github.com/tendermint/tendermint/crypto/merkle"
 	"github.com/tendermint/tendermint/libs/log"
 	tmmath "github.com/tendermint/tendermint/libs/math"
 	tmos "github.com/tendermint/tendermint/libs/os"
@@ -22,6 +24,7 @@ import (
 	lproxy "github.com/tendermint/tendermint/light/proxy"
 	lrpc "github.com/tendermint/tendermint/light/rpc"
 	dbs "github.com/tendermint/tendermint/light/store/db"
+	rpchttp "github.com/tendermint/tendermint/rpc/client/http"
 	rpcserver "github.com/tendermint/tendermint/rpc/jsonrpc/server"
 )
 
@@ -58,7 +61,7 @@ var (
 	primaryAddr        string
 	witnessAddrsJoined string
 	chainID            string
-	home               string
+	dir                string
 	maxOpenConnections int
 
 	sequential     bool
@@ -80,8 +83,8 @@ func init() {
 		"connect to a Tendermint node at this address")
 	LightCmd.Flags().StringVarP(&witnessAddrsJoined, "witnesses", "w", "",
 		"tendermint nodes to cross-check the primary node, comma-separated")
-	LightCmd.Flags().StringVar(&home, "home-dir", os.ExpandEnv(filepath.Join("$HOME", ".tendermint-light")),
-		"specify the home directory")
+	LightCmd.Flags().StringVarP(&dir, "dir", "d", os.ExpandEnv(filepath.Join("$HOME", ".tendermint-light")),
+		"specify the directory")
 	LightCmd.Flags().IntVar(
 		&maxOpenConnections,
 		"max-open-connections",
@@ -119,10 +122,12 @@ func runProxy(cmd *cobra.Command, args []string) error {
 		witnessesAddrs = strings.Split(witnessAddrsJoined, ",")
 	}
 
-	db, err := dbm.NewGoLevelDB("light-client-db", home)
+	lightDB, err := dbm.NewGoLevelDB("light-client-db", dir)
 	if err != nil {
 		return fmt.Errorf("can't create a db: %w", err)
 	}
+	// create a prefixed db on the chainID
+	db := dbm.NewPrefixDB(lightDB, []byte(chainID))
 
 	if primaryAddr == "" { // check to see if we can start from an existing state
 		var err error
@@ -184,7 +189,7 @@ func runProxy(cmd *cobra.Command, args []string) error {
 			},
 			primaryAddr,
 			witnessesAddrs,
-			dbs.New(db, chainID),
+			dbs.New(db),
 			options...,
 		)
 	} else { // continue from latest state
@@ -193,7 +198,7 @@ func runProxy(cmd *cobra.Command, args []string) error {
 			trustingPeriod,
 			primaryAddr,
 			witnessesAddrs,
-			dbs.New(db, chainID),
+			dbs.New(db),
 			options...,
 		)
 	}
@@ -201,6 +206,11 @@ func runProxy(cmd *cobra.Command, args []string) error {
 		return err
 	}
 
+	rpcClient, err := rpchttp.New(primaryAddr, "/websocket")
+	if err != nil {
+		return fmt.Errorf("http client for %s: %w", primaryAddr, err)
+	}
+
 	cfg := rpcserver.DefaultConfig()
 	cfg.MaxBodyBytes = config.RPC.MaxBodyBytes
 	cfg.MaxHeaderBytes = config.RPC.MaxHeaderBytes
@@ -212,11 +222,12 @@ func runProxy(cmd *cobra.Command, args []string) error {
 		cfg.WriteTimeout = config.RPC.TimeoutBroadcastTxCommit + 1*time.Second
 	}
 
-	p, err := lproxy.NewProxy(c, listenAddr, primaryAddr, cfg, logger, lrpc.KeyPathFn(lrpc.DefaultMerkleKeyPathFn()))
-	if err != nil {
-		return err
+	p := lproxy.Proxy{
+		Addr:   listenAddr,
+		Config: cfg,
+		Client: lrpc.NewClient(rpcClient, c, lrpc.KeyPathFn(defaultMerkleKeyPathFn())),
+		Logger: logger,
 	}
-
 	// Stop upon receiving SIGTERM or CTRL-C.
 	tmos.TrapSignal(logger, func() {
 		p.Listener.Close()
@@ -255,3 +266,21 @@ func saveProviders(db dbm.DB, primaryAddr, witnessesAddrs string) error {
 	}
 	return nil
 }
+
+func defaultMerkleKeyPathFn() lrpc.KeyPathFunc {
+	// regexp for extracting store name from /abci_query path
+	storeNameRegexp := regexp.MustCompile(`\/store\/(.+)\/key`)
+
+	return func(path string, key []byte) (merkle.KeyPath, error) {
+		matches := storeNameRegexp.FindStringSubmatch(path)
+		if len(matches) != 2 {
+			return nil, fmt.Errorf("can't find store name in %s using %s", path, storeNameRegexp)
+		}
+		storeName := matches[1]
+
+		kp := merkle.KeyPath{}
+		kp = kp.AppendKey([]byte(storeName), merkle.KeyEncodingURL)
+		kp = kp.AppendKey(key, merkle.KeyEncodingURL)
+		return kp, nil
+	}
+}

cmd/tendermint/commands/reset_priv_validator.go

@@ -8,6 +8,7 @@ import (
 	"github.com/tendermint/tendermint/libs/log"
 	tmos "github.com/tendermint/tendermint/libs/os"
 	"github.com/tendermint/tendermint/privval"
+	"github.com/tendermint/tendermint/types"
 )
 
 // ResetAllCmd removes the database of this Tendermint core
@@ -24,6 +25,8 @@ var keepAddrBook bool
 
 func init() {
 	ResetAllCmd.Flags().BoolVar(&keepAddrBook, "keep-addr-book", false, "keep the address book intact")
+	ResetPrivValidatorCmd.Flags().StringVar(&keyType, "key", types.ABCIPubKeyTypeEd25519,
+		"Key type to generate privval file with. Options: ed25519, secp256k1")
 }
 
 // ResetPrivValidatorCmd resets the private validator files.
@@ -75,7 +78,10 @@ func resetFilePV(privValKeyFile, privValStateFile string, logger log.Logger) {
 		logger.Info("Reset private validator file to genesis state", "keyFile", privValKeyFile,
 			"stateFile", privValStateFile)
 	} else {
-		pv := privval.GenFilePV(privValKeyFile, privValStateFile)
+		pv, err := privval.GenFilePV(privValKeyFile, privValStateFile, keyType)
+		if err != nil {
+			panic(err)
+		}
 		pv.Save()
 		logger.Info("Generated private validator file", "keyFile", privValKeyFile,
 			"stateFile", privValStateFile)

cmd/tendermint/commands/rollback.go

@@ -1,69 +0,0 @@
-package commands
-
-import (
-	"fmt"
-
-	"github.com/spf13/cobra"
-
-	dbm "github.com/tendermint/tm-db"
-
-	cfg "github.com/tendermint/tendermint/config"
-	"github.com/tendermint/tendermint/state"
-	"github.com/tendermint/tendermint/store"
-)
-
-var RollbackStateCmd = &cobra.Command{
-	Use:   "rollback",
-	Short: "rollback tendermint state by one height",
-	Long: `
-A state rollback is performed to recover from an incorrect application state transition,
-when Tendermint has persisted an incorrect app hash and is thus unable to make
-progress. Rollback overwrites a state at height n with the state at height n - 1.
-The application should also roll back to height n - 1. No blocks are removed, so upon
-restarting Tendermint the transactions in block n will be re-executed against the
-application.
-`,
-	RunE: func(cmd *cobra.Command, args []string) error {
-		height, hash, err := RollbackState(config)
-		if err != nil {
-			return fmt.Errorf("failed to rollback state: %w", err)
-		}
-
-		fmt.Printf("Rolled back state to height %d and hash %v", height, hash)
-		return nil
-	},
-}
-
-// RollbackState takes the state at the current height n and overwrites it with the state
-// at height n - 1. Note state here refers to tendermint state not application state.
-// Returns the latest state height and app hash alongside an error if there was one.
-func RollbackState(config *cfg.Config) (int64, []byte, error) {
-	// use the parsed config to load the block and state store
-	blockStore, stateStore, err := loadStateAndBlockStore(config)
-	if err != nil {
-		return -1, nil, err
-	}
-
-	// rollback the last state
-	return state.Rollback(blockStore, stateStore)
-}
-
-func loadStateAndBlockStore(config *cfg.Config) (*store.BlockStore, state.Store, error) {
-	dbType := dbm.BackendType(config.DBBackend)
-
-	// Get BlockStore
-	blockStoreDB, err := dbm.NewDB("blockstore", dbType, config.DBDir())
-	if err != nil {
-		return nil, nil, err
-	}
-	blockStore := store.NewBlockStore(blockStoreDB)
-
-	// Get StateStore
-	stateDB, err := dbm.NewDB("state", dbType, config.DBDir())
-	if err != nil {
-		return nil, nil, err
-	}
-	stateStore := state.NewStore(stateDB)
-
-	return blockStore, stateStore, nil
-}

cmd/tendermint/commands/root.go

@@ -24,7 +24,7 @@ func init() {
 }
 
 func registerFlagsRootCmd(cmd *cobra.Command) {
-	cmd.PersistentFlags().String("log_level", config.LogLevel, "log level")
+	cmd.PersistentFlags().String("log-level", config.LogLevel, "log level")
 }
 
 // ParseConfig retrieves the default environment configuration,
@@ -51,25 +51,20 @@ var RootCmd = &cobra.Command{
 		if cmd.Name() == VersionCmd.Name() {
 			return nil
 		}
-
 		config, err = ParseConfig()
 		if err != nil {
 			return err
 		}
-
 		if config.LogFormat == cfg.LogFormatJSON {
 			logger = log.NewTMJSONLogger(log.NewSyncWriter(os.Stdout))
 		}
-
-		logger, err = tmflags.ParseLogLevel(config.LogLevel, logger, cfg.DefaultLogLevel)
+		logger, err = tmflags.ParseLogLevel(config.LogLevel, logger, cfg.DefaultLogLevel())
 		if err != nil {
 			return err
 		}
-
 		if viper.GetBool(cli.TraceFlag) {
 			logger = log.NewTracingLogger(logger)
 		}
-
 		logger = logger.With("module", "main")
 		return nil
 	},

cmd/tendermint/commands/root_test.go

@@ -99,7 +99,7 @@ func TestRootFlagsEnv(t *testing.T) {
 		logLevel string
 	}{
 		{[]string{"--log", "debug"}, nil, defaultLogLvl},                 // wrong flag
-		{[]string{"--log_level", "debug"}, nil, "debug"},                 // right flag
+		{[]string{"--log-level", "debug"}, nil, "debug"},                 // right flag
 		{nil, map[string]string{"TM_LOW": "debug"}, defaultLogLvl},       // wrong env flag
 		{nil, map[string]string{"MT_LOG_LEVEL": "debug"}, defaultLogLvl}, // wrong env prefix
 		{nil, map[string]string{"TM_LOG_LEVEL": "debug"}, "debug"},       // right env
@@ -120,7 +120,7 @@ func TestRootConfig(t *testing.T) {
 	// write non-default config
 	nonDefaultLogLvl := "abc:debug"
 	cvals := map[string]string{
-		"log_level": nonDefaultLogLvl,
+		"log-level": nonDefaultLogLvl,
 	}
 
 	cases := []struct {
@@ -130,7 +130,7 @@ func TestRootConfig(t *testing.T) {
 		logLvl string
 	}{
 		{nil, nil, nonDefaultLogLvl},                                     // should load config
-		{[]string{"--log_level=abc:info"}, nil, "abc:info"},              // flag over rides
+		{[]string{"--log-level=abc:info"}, nil, "abc:info"},              // flag over rides
 		{nil, map[string]string{"TM_LOG_LEVEL": "abc:info"}, "abc:info"}, // env over rides
 	}
 

cmd/tendermint/commands/run_node.go

@@ -26,37 +26,39 @@ func AddNodeFlags(cmd *cobra.Command) {
 
 	// priv val flags
 	cmd.Flags().String(
-		"priv_validator_laddr",
+		"priv-validator-laddr",
 		config.PrivValidatorListenAddr,
-		"socket address to listen on for connections from external priv_validator process")
+		"socket address to listen on for connections from external priv-validator process")
 
 	// node flags
-	cmd.Flags().Bool("fast_sync", config.FastSyncMode, "fast blockchain syncing")
+	cmd.Flags().Bool("fast-sync", config.FastSyncMode, "fast blockchain syncing")
 	cmd.Flags().BytesHexVar(
 		&genesisHash,
-		"genesis_hash",
+		"genesis-hash",
 		[]byte{},
 		"optional SHA-256 hash of the genesis file")
-	cmd.Flags().Int64("consensus.double_sign_check_height", config.Consensus.DoubleSignCheckHeight,
+	cmd.Flags().Int64("consensus.double-sign-check-height", config.Consensus.DoubleSignCheckHeight,
 		"how many blocks to look back to check existence of the node's "+
 			"consensus votes before joining consensus")
 
 	// abci flags
 	cmd.Flags().String(
-		"proxy_app",
+		"proxy-app",
 		config.ProxyApp,
 		"proxy app address, or one of: 'kvstore',"+
-			" 'persistent_kvstore', 'counter', 'e2e' or 'noop' for local testing.")
+			" 'persistent_kvstore',"+
+			" 'counter',"+
+			" 'counter_serial' or 'noop' for local testing.")
 	cmd.Flags().String("abci", config.ABCI, "specify abci transport (socket | grpc)")
 
 	// rpc flags
 	cmd.Flags().String("rpc.laddr", config.RPC.ListenAddress, "RPC listen address. Port required")
 	cmd.Flags().String(
-		"rpc.grpc_laddr",
+		"rpc.grpc-laddr",
 		config.RPC.GRPCListenAddress,
 		"GRPC listen address (BroadcastTx only). Port required")
 	cmd.Flags().Bool("rpc.unsafe", config.RPC.Unsafe, "enabled unsafe rpc methods")
-	cmd.Flags().String("rpc.pprof_laddr", config.RPC.PprofListenAddress, "pprof listen address (https://golang.org/pkg/net/http/pprof)")
+	cmd.Flags().String("rpc.pprof-laddr", config.RPC.PprofListenAddress, "pprof listen address (https://golang.org/pkg/net/http/pprof)")
 
 	// p2p flags
 	cmd.Flags().String(
@@ -64,31 +66,31 @@ func AddNodeFlags(cmd *cobra.Command) {
 		config.P2P.ListenAddress,
 		"node listen address. (0.0.0.0:0 means any interface, any port)")
 	cmd.Flags().String("p2p.seeds", config.P2P.Seeds, "comma-delimited ID@host:port seed nodes")
-	cmd.Flags().String("p2p.persistent_peers", config.P2P.PersistentPeers, "comma-delimited ID@host:port persistent peers")
-	cmd.Flags().String("p2p.unconditional_peer_ids",
+	cmd.Flags().String("p2p.persistent-peers", config.P2P.PersistentPeers, "comma-delimited ID@host:port persistent peers")
+	cmd.Flags().String("p2p.unconditional-peer-ids",
 		config.P2P.UnconditionalPeerIDs, "comma-delimited IDs of unconditional peers")
 	cmd.Flags().Bool("p2p.upnp", config.P2P.UPNP, "enable/disable UPNP port forwarding")
 	cmd.Flags().Bool("p2p.pex", config.P2P.PexReactor, "enable/disable Peer-Exchange")
-	cmd.Flags().Bool("p2p.seed_mode", config.P2P.SeedMode, "enable/disable seed mode")
-	cmd.Flags().String("p2p.private_peer_ids", config.P2P.PrivatePeerIDs, "comma-delimited private peer IDs")
+	cmd.Flags().Bool("p2p.seed-mode", config.P2P.SeedMode, "enable/disable seed mode")
+	cmd.Flags().String("p2p.private-peer-ids", config.P2P.PrivatePeerIDs, "comma-delimited private peer IDs")
 
 	// consensus flags
 	cmd.Flags().Bool(
-		"consensus.create_empty_blocks",
+		"consensus.create-empty-blocks",
 		config.Consensus.CreateEmptyBlocks,
 		"set this to false to only produce blocks when there are txs or when the AppHash changes")
 	cmd.Flags().String(
-		"consensus.create_empty_blocks_interval",
+		"consensus.create-empty-blocks-interval",
 		config.Consensus.CreateEmptyBlocksInterval.String(),
 		"the possible interval between empty blocks")
 
 	// db flags
 	cmd.Flags().String(
-		"db_backend",
+		"db-backend",
 		config.DBBackend,
 		"database backend: goleveldb | cleveldb | boltdb | rocksdb | badgerdb")
 	cmd.Flags().String(
-		"db_dir",
+		"db-dir",
 		config.DBPath,
 		"database directory")
 }

cmd/tendermint/commands/show_node_id.go

@@ -23,6 +23,6 @@ func showNodeID(cmd *cobra.Command, args []string) error {
 		return err
 	}
 
-	fmt.Println(nodeKey.ID())
+	fmt.Println(nodeKey.ID)
 	return nil
 }

cmd/tendermint/commands/show_validator.go

@@ -5,9 +5,12 @@ import (
 
 	"github.com/spf13/cobra"
 
+	"github.com/tendermint/tendermint/crypto"
 	tmjson "github.com/tendermint/tendermint/libs/json"
+	tmnet "github.com/tendermint/tendermint/libs/net"
 	tmos "github.com/tendermint/tendermint/libs/os"
 	"github.com/tendermint/tendermint/privval"
+	tmgrpc "github.com/tendermint/tendermint/privval/grpc"
 )
 
 // ShowValidatorCmd adds capabilities for showing the validator info.
@@ -20,16 +23,36 @@ var ShowValidatorCmd = &cobra.Command{
 }
 
 func showValidator(cmd *cobra.Command, args []string) error {
-	keyFilePath := config.PrivValidatorKeyFile()
-	if !tmos.FileExists(keyFilePath) {
-		return fmt.Errorf("private validator file %s does not exist", keyFilePath)
-	}
+	var (
+		pubKey crypto.PubKey
+		err    error
+	)
 
-	pv := privval.LoadFilePV(keyFilePath, config.PrivValidatorStateFile())
+	//TODO: remove once gRPC is the only supported protocol
+	protocol, _ := tmnet.ProtocolAndAddress(config.PrivValidatorListenAddr)
+	switch protocol {
+	case "grpc":
+		pvsc, err := tmgrpc.DialRemoteSigner(config, config.ChainID(), logger)
+		if err != nil {
+			return fmt.Errorf("can't connect to remote validator %w", err)
+		}
+		pubKey, err = pvsc.GetPubKey()
+		if err != nil {
+			return fmt.Errorf("can't get pubkey: %w", err)
+		}
+	default:
 
-	pubKey, err := pv.GetPubKey()
-	if err != nil {
-		return fmt.Errorf("can't get pubkey: %w", err)
+		keyFilePath := config.PrivValidatorKeyFile()
+		if !tmos.FileExists(keyFilePath) {
+			return fmt.Errorf("private validator file %s does not exist", keyFilePath)
+		}
+
+		pv := privval.LoadFilePV(keyFilePath, config.PrivValidatorStateFile())
+
+		pubKey, err = pv.GetPubKey()
+		if err != nil {
+			return fmt.Errorf("can't get pubkey: %w", err)
+		}
 	}
 
 	bz, err := tmjson.Marshal(pubKey)

cmd/tendermint/commands/testnet.go

@@ -15,6 +15,7 @@ import (
 	tmrand "github.com/tendermint/tendermint/libs/rand"
 	"github.com/tendermint/tendermint/p2p"
 	"github.com/tendermint/tendermint/privval"
+	tmproto "github.com/tendermint/tendermint/proto/tendermint/types"
 	"github.com/tendermint/tendermint/types"
 	tmtime "github.com/tendermint/tendermint/types/time"
 )
@@ -74,6 +75,8 @@ func init() {
 		"P2P Port")
 	TestnetFilesCmd.Flags().BoolVar(&randomMonikers, "random-monikers", false,
 		"randomize the moniker for each generated node")
+	TestnetFilesCmd.Flags().StringVar(&keyType, "key", types.ABCIPubKeyTypeEd25519,
+		"Key type to generate privval file with. Options: ed25519, secp256k1")
 }
 
 // TestnetFilesCmd allows initialisation of files for a Tendermint testnet.
@@ -85,7 +88,7 @@ necessary files (private validator, genesis, config, etc.).
 
 Note, strict routability for addresses is turned off in the config file.
 
-Optionally, it will fill in persistent_peers list in config file using either hostnames or IPs.
+Optionally, it will fill in persistent-peers list in config file using either hostnames or IPs.
 
 Example:
 
@@ -180,10 +183,15 @@ func testnetFiles(cmd *cobra.Command, args []string) error {
 	// Generate genesis doc from generated validators
 	genDoc := &types.GenesisDoc{
 		ChainID:         "chain-" + tmrand.Str(6),
-		ConsensusParams: types.DefaultConsensusParams(),
 		GenesisTime:     tmtime.Now(),
 		InitialHeight:   initialHeight,
 		Validators:      genVals,
+		ConsensusParams: types.DefaultConsensusParams(),
+	}
+	if keyType == "secp256k1" {
+		genDoc.ConsensusParams.Validator = tmproto.ValidatorParams{
+			PubKeyTypes: []string{types.ABCIPubKeyTypeSecp256k1},
+		}
 	}
 
 	// Write genesis file.
@@ -255,7 +263,7 @@ func persistentPeersString(config *cfg.Config) (string, error) {
 		if err != nil {
 			return "", err
 		}
-		persistentPeers[i] = p2p.IDAddressString(nodeKey.ID(), fmt.Sprintf("%s:%d", hostnameOrIP(i), p2pPort))
+		persistentPeers[i] = p2p.IDAddressString(nodeKey.ID, fmt.Sprintf("%s:%d", hostnameOrIP(i), p2pPort))
 	}
 	return strings.Join(persistentPeers, ","), nil
 }

cmd/tendermint/main.go

@@ -27,7 +27,6 @@ func main() {
 		cmd.ShowNodeIDCmd,
 		cmd.GenNodeKeyCmd,
 		cmd.VersionCmd,
-		cmd.RollbackStateCmd,
 		debug.DebugCmd,
 		cli.NewCompletionCmd(rootCmd, true),
 	)

config/config.go

@@ -20,9 +20,6 @@ const (
 	LogFormatPlain = "plain"
 	// LogFormatJSON is a format for json output
 	LogFormatJSON = "json"
-
-	// DefaultLogLevel defines a default log level as INFO.
-	DefaultLogLevel = "info"
 )
 
 // NOTE: Most of the structs & relevant comments + the
@@ -66,7 +63,7 @@ type Config struct {
 	StateSync       *StateSyncConfig       `mapstructure:"statesync"`
 	FastSync        *FastSyncConfig        `mapstructure:"fastsync"`
 	Consensus       *ConsensusConfig       `mapstructure:"consensus"`
-	TxIndex         *TxIndexConfig         `mapstructure:"tx_index"`
+	TxIndex         *TxIndexConfig         `mapstructure:"tx-index"`
 	Instrumentation *InstrumentationConfig `mapstructure:"instrumentation"`
 }
 
@@ -154,7 +151,7 @@ type BaseConfig struct { //nolint: maligned
 
 	// TCP or UNIX socket address of the ABCI application,
 	// or the name of an ABCI application compiled in with the Tendermint binary
-	ProxyApp string `mapstructure:"proxy_app"`
+	ProxyApp string `mapstructure:"proxy-app"`
 
 	// A custom human readable name for this node
 	Moniker string `mapstructure:"moniker"`
@@ -162,7 +159,7 @@ type BaseConfig struct { //nolint: maligned
 	// If this node is many blocks behind the tip of the chain, FastSync
 	// allows them to catchup quickly by downloading blocks in parallel
 	// and verifying their commits
-	FastSyncMode bool `mapstructure:"fast_sync"`
+	FastSyncMode bool `mapstructure:"fast-sync"`
 
 	// Database backend: goleveldb | cleveldb | boltdb | rocksdb
 	// * goleveldb (github.com/syndtr/goleveldb - most popular implementation)
@@ -183,39 +180,49 @@ type BaseConfig struct { //nolint: maligned
 	// * badgerdb (uses github.com/dgraph-io/badger)
 	//   - EXPERIMENTAL
 	//   - use badgerdb build tag (go build -tags badgerdb)
-	DBBackend string `mapstructure:"db_backend"`
+	DBBackend string `mapstructure:"db-backend"`
 
 	// Database directory
-	DBPath string `mapstructure:"db_dir"`
+	DBPath string `mapstructure:"db-dir"`
 
 	// Output level for logging
-	LogLevel string `mapstructure:"log_level"`
+	LogLevel string `mapstructure:"log-level"`
 
 	// Output format: 'plain' (colored text) or 'json'
-	LogFormat string `mapstructure:"log_format"`
+	LogFormat string `mapstructure:"log-format"`
 
 	// Path to the JSON file containing the initial validator set and other meta data
-	Genesis string `mapstructure:"genesis_file"`
+	Genesis string `mapstructure:"genesis-file"`
 
 	// Path to the JSON file containing the private key to use as a validator in the consensus protocol
-	PrivValidatorKey string `mapstructure:"priv_validator_key_file"`
+	PrivValidatorKey string `mapstructure:"priv-validator-key-file"`
 
 	// Path to the JSON file containing the last sign state of a validator
-	PrivValidatorState string `mapstructure:"priv_validator_state_file"`
+	PrivValidatorState string `mapstructure:"priv-validator-state-file"`
 
 	// TCP or UNIX socket address for Tendermint to listen on for
 	// connections from an external PrivValidator process
-	PrivValidatorListenAddr string `mapstructure:"priv_validator_laddr"`
+	PrivValidatorListenAddr string `mapstructure:"priv-validator-laddr"`
+
+	// Client certificate generated while creating needed files for secure connection.
+	// If a remote validator address is provided but no certificate, the connection will be insecure
+	PrivValidatorClientCertificate string `mapstructure:"priv-validator-client-certificate-file"`
+
+	// Client key generated while creating certificates for secure connection
+	PrivValidatorClientKey string `mapstructure:"priv-validator-client-key-file"`
+
+	// Path Root Certificate Authority used to sign both client and server certificates
+	PrivValidatorRootCA string `mapstructure:"priv-validator-root-ca-file"`
 
 	// A JSON file containing the private key to use for p2p authenticated encryption
-	NodeKey string `mapstructure:"node_key_file"`
+	NodeKey string `mapstructure:"node-key-file"`
 
 	// Mechanism to connect to the ABCI application: socket | grpc
 	ABCI string `mapstructure:"abci"`
 
 	// If true, query the ABCI app on connecting to a new peer
 	// so the app can decide if we should keep the connection or not
-	FilterPeers bool `mapstructure:"filter_peers"` // false
+	FilterPeers bool `mapstructure:"filter-peers"` // false
 }
 
 // DefaultBaseConfig returns a default base configuration for a Tendermint node
@@ -228,7 +235,7 @@ func DefaultBaseConfig() BaseConfig {
 		Moniker:            defaultMoniker,
 		ProxyApp:           "tcp://127.0.0.1:26658",
 		ABCI:               "socket",
-		LogLevel:           DefaultLogLevel,
+		LogLevel:           DefaultPackageLogLevels(),
 		LogFormat:          LogFormatPlain,
 		FastSyncMode:       true,
 		FilterPeers:        false,
@@ -256,6 +263,21 @@ func (cfg BaseConfig) GenesisFile() string {
 	return rootify(cfg.Genesis, cfg.RootDir)
 }
 
+// PrivValidatorClientKeyFile returns the full path to the priv_validator_key.json file
+func (cfg BaseConfig) PrivValidatorClientKeyFile() string {
+	return rootify(cfg.PrivValidatorClientKey, cfg.RootDir)
+}
+
+// PrivValidatorClientCertificateFile returns the full path to the priv_validator_key.json file
+func (cfg BaseConfig) PrivValidatorClientCertificateFile() string {
+	return rootify(cfg.PrivValidatorClientCertificate, cfg.RootDir)
+}
+
+// PrivValidatorCertificateAuthorityFile returns the full path to the priv_validator_key.json file
+func (cfg BaseConfig) PrivValidatorRootCAFile() string {
+	return rootify(cfg.PrivValidatorRootCA, cfg.RootDir)
+}
+
 // PrivValidatorKeyFile returns the full path to the priv_validator_key.json file
 func (cfg BaseConfig) PrivValidatorKeyFile() string {
 	return rootify(cfg.PrivValidatorKey, cfg.RootDir)
@@ -276,17 +298,41 @@ func (cfg BaseConfig) DBDir() string {
 	return rootify(cfg.DBPath, cfg.RootDir)
 }
 
+func (cfg *BaseConfig) ArePrivValidatorClientSecurityOptionsPresent() bool {
+	switch {
+	case cfg.PrivValidatorRootCA == "":
+		return false
+	case cfg.PrivValidatorClientKey == "":
+		return false
+	case cfg.PrivValidatorClientCertificate == "":
+		return false
+	default:
+		return true
+	}
+}
+
 // ValidateBasic performs basic validation (checking param bounds, etc.) and
 // returns an error if any check fails.
 func (cfg BaseConfig) ValidateBasic() error {
 	switch cfg.LogFormat {
 	case LogFormatPlain, LogFormatJSON:
 	default:
-		return errors.New("unknown log_format (must be 'plain' or 'json')")
+		return errors.New("unknown log format (must be 'plain' or 'json')")
 	}
 	return nil
 }
 
+// DefaultLogLevel returns a default log level of "error"
+func DefaultLogLevel() string {
+	return "error"
+}
+
+// DefaultPackageLogLevels returns a default log level setting so all packages
+// log at "error", while the `state` and `main` packages log at "info"
+func DefaultPackageLogLevels() string {
+	return fmt.Sprintf("main:info,state:info,statesync:info,*:%s", DefaultLogLevel())
+}
+
 //-----------------------------------------------------------------------------
 // RPCConfig
 
@@ -301,58 +347,58 @@ type RPCConfig struct {
 	// If the special '*' value is present in the list, all origins will be allowed.
 	// An origin may contain a wildcard (*) to replace 0 or more characters (i.e.: http://*.domain.com).
 	// Only one wildcard can be used per origin.
-	CORSAllowedOrigins []string `mapstructure:"cors_allowed_origins"`
+	CORSAllowedOrigins []string `mapstructure:"cors-allowed-origins"`
 
 	// A list of methods the client is allowed to use with cross-domain requests.
-	CORSAllowedMethods []string `mapstructure:"cors_allowed_methods"`
+	CORSAllowedMethods []string `mapstructure:"cors-allowed-methods"`
 
 	// A list of non simple headers the client is allowed to use with cross-domain requests.
-	CORSAllowedHeaders []string `mapstructure:"cors_allowed_headers"`
+	CORSAllowedHeaders []string `mapstructure:"cors-allowed-headers"`
 
 	// TCP or UNIX socket address for the gRPC server to listen on
 	// NOTE: This server only supports /broadcast_tx_commit
-	GRPCListenAddress string `mapstructure:"grpc_laddr"`
+	GRPCListenAddress string `mapstructure:"grpc-laddr"`
 
 	// Maximum number of simultaneous connections.
-	// Does not include RPC (HTTP&WebSocket) connections. See max_open_connections
+	// Does not include RPC (HTTP&WebSocket) connections. See max-open-connections
 	// If you want to accept a larger number than the default, make sure
 	// you increase your OS limits.
 	// 0 - unlimited.
-	GRPCMaxOpenConnections int `mapstructure:"grpc_max_open_connections"`
+	GRPCMaxOpenConnections int `mapstructure:"grpc-max-open-connections"`
 
-	// Activate unsafe RPC commands like /dial_persistent_peers and /unsafe_flush_mempool
+	// Activate unsafe RPC commands like /dial-persistent-peers and /unsafe-flush-mempool
 	Unsafe bool `mapstructure:"unsafe"`
 
 	// Maximum number of simultaneous connections (including WebSocket).
-	// Does not include gRPC connections. See grpc_max_open_connections
+	// Does not include gRPC connections. See grpc-max-open-connections
 	// If you want to accept a larger number than the default, make sure
 	// you increase your OS limits.
 	// 0 - unlimited.
 	// Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
 	// 1024 - 40 - 10 - 50 = 924 = ~900
-	MaxOpenConnections int `mapstructure:"max_open_connections"`
+	MaxOpenConnections int `mapstructure:"max-open-connections"`
 
 	// Maximum number of unique clientIDs that can /subscribe
 	// If you're using /broadcast_tx_commit, set to the estimated maximum number
 	// of broadcast_tx_commit calls per block.
-	MaxSubscriptionClients int `mapstructure:"max_subscription_clients"`
+	MaxSubscriptionClients int `mapstructure:"max-subscription-clients"`
 
 	// Maximum number of unique queries a given client can /subscribe to
 	// If you're using GRPC (or Local RPC client) and /broadcast_tx_commit, set
 	// to the estimated maximum number of broadcast_tx_commit calls per block.
-	MaxSubscriptionsPerClient int `mapstructure:"max_subscriptions_per_client"`
+	MaxSubscriptionsPerClient int `mapstructure:"max-subscriptions-per-client"`
 
 	// How long to wait for a tx to be committed during /broadcast_tx_commit
 	// WARNING: Using a value larger than 10s will result in increasing the
 	// global HTTP write timeout, which applies to all connections and endpoints.
 	// See https://github.com/tendermint/tendermint/issues/3435
-	TimeoutBroadcastTxCommit time.Duration `mapstructure:"timeout_broadcast_tx_commit"`
+	TimeoutBroadcastTxCommit time.Duration `mapstructure:"timeout-broadcast-tx-commit"`
 
 	// Maximum size of request body, in bytes
-	MaxBodyBytes int64 `mapstructure:"max_body_bytes"`
+	MaxBodyBytes int64 `mapstructure:"max-body-bytes"`
 
 	// Maximum size of request header, in bytes
-	MaxHeaderBytes int `mapstructure:"max_header_bytes"`
+	MaxHeaderBytes int `mapstructure:"max-header-bytes"`
 
 	// The path to a file containing certificate that is used to create the HTTPS server.
 	// Might be either absolute path or path related to Tendermint's config directory.
@@ -361,19 +407,19 @@ type RPCConfig struct {
 	// the certFile should be the concatenation of the server's certificate, any intermediates,
 	// and the CA's certificate.
 	//
-	// NOTE: both tls_cert_file and tls_key_file must be present for Tendermint to create HTTPS server.
+	// NOTE: both tls-cert-file and tls-key-file must be present for Tendermint to create HTTPS server.
 	// Otherwise, HTTP server is run.
-	TLSCertFile string `mapstructure:"tls_cert_file"`
+	TLSCertFile string `mapstructure:"tls-cert-file"`
 
 	// The path to a file containing matching private key that is used to create the HTTPS server.
 	// Might be either absolute path or path related to tendermint's config directory.
 	//
-	// NOTE: both tls_cert_file and tls_key_file must be present for Tendermint to create HTTPS server.
+	// NOTE: both tls-cert-file and tls-key-file must be present for Tendermint to create HTTPS server.
 	// Otherwise, HTTP server is run.
-	TLSKeyFile string `mapstructure:"tls_key_file"`
+	TLSKeyFile string `mapstructure:"tls-key-file"`
 
 	// pprof listen address (https://golang.org/pkg/net/http/pprof)
-	PprofListenAddress string `mapstructure:"pprof_laddr"`
+	PprofListenAddress string `mapstructure:"pprof-laddr"`
 }
 
 // DefaultRPCConfig returns a default configuration for the RPC server
@@ -414,25 +460,25 @@ func TestRPCConfig() *RPCConfig {
 // returns an error if any check fails.
 func (cfg *RPCConfig) ValidateBasic() error {
 	if cfg.GRPCMaxOpenConnections < 0 {
-		return errors.New("grpc_max_open_connections can't be negative")
+		return errors.New("grpc-max-open-connections can't be negative")
 	}
 	if cfg.MaxOpenConnections < 0 {
-		return errors.New("max_open_connections can't be negative")
+		return errors.New("max-open-connections can't be negative")
 	}
 	if cfg.MaxSubscriptionClients < 0 {
-		return errors.New("max_subscription_clients can't be negative")
+		return errors.New("max-subscription-clients can't be negative")
 	}
 	if cfg.MaxSubscriptionsPerClient < 0 {
-		return errors.New("max_subscriptions_per_client can't be negative")
+		return errors.New("max-subscriptions-per-client can't be negative")
 	}
 	if cfg.TimeoutBroadcastTxCommit < 0 {
-		return errors.New("timeout_broadcast_tx_commit can't be negative")
+		return errors.New("timeout-broadcast-tx-commit can't be negative")
 	}
 	if cfg.MaxBodyBytes < 0 {
-		return errors.New("max_body_bytes can't be negative")
+		return errors.New("max-body-bytes can't be negative")
 	}
 	if cfg.MaxHeaderBytes < 0 {
-		return errors.New("max_header_bytes can't be negative")
+		return errors.New("max-header-bytes can't be negative")
 	}
 	return nil
 }
@@ -473,48 +519,48 @@ type P2PConfig struct { //nolint: maligned
 	ListenAddress string `mapstructure:"laddr"`
 
 	// Address to advertise to peers for them to dial
-	ExternalAddress string `mapstructure:"external_address"`
+	ExternalAddress string `mapstructure:"external-address"`
 
 	// Comma separated list of seed nodes to connect to
 	// We only use these if we can’t connect to peers in the addrbook
 	Seeds string `mapstructure:"seeds"`
 
 	// Comma separated list of nodes to keep persistent connections to
-	PersistentPeers string `mapstructure:"persistent_peers"`
+	PersistentPeers string `mapstructure:"persistent-peers"`
 
 	// UPNP port forwarding
 	UPNP bool `mapstructure:"upnp"`
 
 	// Path to address book
-	AddrBook string `mapstructure:"addr_book_file"`
+	AddrBook string `mapstructure:"addr-book-file"`
 
 	// Set true for strict address routability rules
 	// Set false for private or local networks
-	AddrBookStrict bool `mapstructure:"addr_book_strict"`
+	AddrBookStrict bool `mapstructure:"addr-book-strict"`
 
 	// Maximum number of inbound peers
-	MaxNumInboundPeers int `mapstructure:"max_num_inbound_peers"`
+	MaxNumInboundPeers int `mapstructure:"max-num-inbound-peers"`
 
 	// Maximum number of outbound peers to connect to, excluding persistent peers
-	MaxNumOutboundPeers int `mapstructure:"max_num_outbound_peers"`
+	MaxNumOutboundPeers int `mapstructure:"max-num-outbound-peers"`
 
 	// List of node IDs, to which a connection will be (re)established ignoring any existing limits
-	UnconditionalPeerIDs string `mapstructure:"unconditional_peer_ids"`
+	UnconditionalPeerIDs string `mapstructure:"unconditional-peer-ids"`
 
 	// Maximum pause when redialing a persistent peer (if zero, exponential backoff is used)
-	PersistentPeersMaxDialPeriod time.Duration `mapstructure:"persistent_peers_max_dial_period"`
+	PersistentPeersMaxDialPeriod time.Duration `mapstructure:"persistent-peers-max-dial-period"`
 
 	// Time to wait before flushing messages out on the connection
-	FlushThrottleTimeout time.Duration `mapstructure:"flush_throttle_timeout"`
+	FlushThrottleTimeout time.Duration `mapstructure:"flush-throttle-timeout"`
 
 	// Maximum size of a message packet payload, in bytes
-	MaxPacketMsgPayloadSize int `mapstructure:"max_packet_msg_payload_size"`
+	MaxPacketMsgPayloadSize int `mapstructure:"max-packet-msg-payload-size"`
 
 	// Rate at which packets can be sent, in bytes/second
-	SendRate int64 `mapstructure:"send_rate"`
+	SendRate int64 `mapstructure:"send-rate"`
 
 	// Rate at which packets can be received, in bytes/second
-	RecvRate int64 `mapstructure:"recv_rate"`
+	RecvRate int64 `mapstructure:"recv-rate"`
 
 	// Set true to enable the peer-exchange reactor
 	PexReactor bool `mapstructure:"pex"`
@@ -523,25 +569,22 @@ type P2PConfig struct { //nolint: maligned
 	// peers. If another node asks it for addresses, it responds and disconnects.
 	//
 	// Does not work if the peer-exchange reactor is disabled.
-	SeedMode bool `mapstructure:"seed_mode"`
+	SeedMode bool `mapstructure:"seed-mode"`
 
 	// Comma separated list of peer IDs to keep private (will not be gossiped to
 	// other peers)
-	PrivatePeerIDs string `mapstructure:"private_peer_ids"`
+	PrivatePeerIDs string `mapstructure:"private-peer-ids"`
 
 	// Toggle to disable guard against peers connecting from the same ip.
-	AllowDuplicateIP bool `mapstructure:"allow_duplicate_ip"`
+	AllowDuplicateIP bool `mapstructure:"allow-duplicate-ip"`
 
 	// Peer connection configuration.
-	HandshakeTimeout time.Duration `mapstructure:"handshake_timeout"`
-	DialTimeout      time.Duration `mapstructure:"dial_timeout"`
+	HandshakeTimeout time.Duration `mapstructure:"handshake-timeout"`
+	DialTimeout      time.Duration `mapstructure:"dial-timeout"`
 
 	// Testing params.
 	// Force dial to fail
-	TestDialFail bool `mapstructure:"test_dial_fail"`
-	// FUzz connection
-	TestFuzz       bool            `mapstructure:"test_fuzz"`
-	TestFuzzConfig *FuzzConnConfig `mapstructure:"test_fuzz_config"`
+	TestDialFail bool `mapstructure:"test-dial-fail"`
 }
 
 // DefaultP2PConfig returns a default configuration for the peer-to-peer layer
@@ -556,17 +599,20 @@ func DefaultP2PConfig() *P2PConfig {
 		MaxNumOutboundPeers:          10,
 		PersistentPeersMaxDialPeriod: 0 * time.Second,
 		FlushThrottleTimeout:         100 * time.Millisecond,
-		MaxPacketMsgPayloadSize:      1024,    // 1 kB
-		SendRate:                     5120000, // 5 mB/s
-		RecvRate:                     5120000, // 5 mB/s
-		PexReactor:                   true,
-		SeedMode:                     false,
-		AllowDuplicateIP:             false,
-		HandshakeTimeout:             20 * time.Second,
-		DialTimeout:                  3 * time.Second,
-		TestDialFail:                 false,
-		TestFuzz:                     false,
-		TestFuzzConfig:               DefaultFuzzConnConfig(),
+		// The MTU (Maximum Transmission Unit) for Ethernet is 1500 bytes.
+		// The IP header and the TCP header take up 20 bytes each at least (unless
+		// optional header fields are used) and thus the max for (non-Jumbo frame)
+		// Ethernet is 1500 - 20 -20 = 1460
+		// Source: https://stackoverflow.com/a/3074427/820520
+		MaxPacketMsgPayloadSize: 1400,
+		SendRate:                5120000, // 5 mB/s
+		RecvRate:                5120000, // 5 mB/s
+		PexReactor:              true,
+		SeedMode:                false,
+		AllowDuplicateIP:        false,
+		HandshakeTimeout:        20 * time.Second,
+		DialTimeout:             3 * time.Second,
+		TestDialFail:            false,
 	}
 }
 
@@ -588,49 +634,29 @@ func (cfg *P2PConfig) AddrBookFile() string {
 // returns an error if any check fails.
 func (cfg *P2PConfig) ValidateBasic() error {
 	if cfg.MaxNumInboundPeers < 0 {
-		return errors.New("max_num_inbound_peers can't be negative")
+		return errors.New("max-num-inbound-peers can't be negative")
 	}
 	if cfg.MaxNumOutboundPeers < 0 {
-		return errors.New("max_num_outbound_peers can't be negative")
+		return errors.New("max-num-outbound-peers can't be negative")
 	}
 	if cfg.FlushThrottleTimeout < 0 {
-		return errors.New("flush_throttle_timeout can't be negative")
+		return errors.New("flush-throttle-timeout can't be negative")
 	}
 	if cfg.PersistentPeersMaxDialPeriod < 0 {
-		return errors.New("persistent_peers_max_dial_period can't be negative")
+		return errors.New("persistent-peers-max-dial-period can't be negative")
 	}
 	if cfg.MaxPacketMsgPayloadSize < 0 {
-		return errors.New("max_packet_msg_payload_size can't be negative")
+		return errors.New("max-packet-msg-payload-size can't be negative")
 	}
 	if cfg.SendRate < 0 {
-		return errors.New("send_rate can't be negative")
+		return errors.New("send-rate can't be negative")
 	}
 	if cfg.RecvRate < 0 {
-		return errors.New("recv_rate can't be negative")
+		return errors.New("recv-rate can't be negative")
 	}
 	return nil
 }
 
-// FuzzConnConfig is a FuzzedConnection configuration.
-type FuzzConnConfig struct {
-	Mode         int
-	MaxDelay     time.Duration
-	ProbDropRW   float64
-	ProbDropConn float64
-	ProbSleep    float64
-}
-
-// DefaultFuzzConnConfig returns the default config.
-func DefaultFuzzConnConfig() *FuzzConnConfig {
-	return &FuzzConnConfig{
-		Mode:         FuzzModeDrop,
-		MaxDelay:     3 * time.Second,
-		ProbDropRW:   0.2,
-		ProbDropConn: 0.00,
-		ProbSleep:    0.00,
-	}
-}
-
 //-----------------------------------------------------------------------------
 // MempoolConfig
 
@@ -639,26 +665,26 @@ type MempoolConfig struct {
 	RootDir   string `mapstructure:"home"`
 	Recheck   bool   `mapstructure:"recheck"`
 	Broadcast bool   `mapstructure:"broadcast"`
-	WalPath   string `mapstructure:"wal_dir"`
+	WalPath   string `mapstructure:"wal-dir"`
 	// Maximum number of transactions in the mempool
 	Size int `mapstructure:"size"`
 	// Limit the total size of all txs in the mempool.
 	// This only accounts for raw transactions (e.g. given 1MB transactions and
-	// max_txs_bytes=5MB, mempool will only accept 5 transactions).
-	MaxTxsBytes int64 `mapstructure:"max_txs_bytes"`
+	// max-txs-bytes=5MB, mempool will only accept 5 transactions).
+	MaxTxsBytes int64 `mapstructure:"max-txs-bytes"`
 	// Size of the cache (used to filter transactions we saw earlier) in transactions
-	CacheSize int `mapstructure:"cache_size"`
+	CacheSize int `mapstructure:"cache-size"`
 	// Do not remove invalid transactions from the cache (default: false)
 	// Set to true if it's not possible for any invalid transaction to become
 	// valid again in the future.
 	KeepInvalidTxsInCache bool `mapstructure:"keep-invalid-txs-in-cache"`
 	// Maximum size of a single transaction
-	// NOTE: the max size of a tx transmitted over the network is {max_tx_bytes}.
-	MaxTxBytes int `mapstructure:"max_tx_bytes"`
+	// NOTE: the max size of a tx transmitted over the network is {max-tx-bytes}.
+	MaxTxBytes int `mapstructure:"max-tx-bytes"`
 	// Maximum size of a batch of transactions to send to a peer
 	// Including space needed by encoding (one varint per transaction).
 	// XXX: Unused due to https://github.com/tendermint/tendermint/issues/5796
-	MaxBatchBytes int `mapstructure:"max_batch_bytes"`
+	MaxBatchBytes int `mapstructure:"max-batch-bytes"`
 }
 
 // DefaultMempoolConfig returns a default configuration for the Tendermint mempool
@@ -700,13 +726,13 @@ func (cfg *MempoolConfig) ValidateBasic() error {
 		return errors.New("size can't be negative")
 	}
 	if cfg.MaxTxsBytes < 0 {
-		return errors.New("max_txs_bytes can't be negative")
+		return errors.New("max-txs-bytes can't be negative")
 	}
 	if cfg.CacheSize < 0 {
-		return errors.New("cache_size can't be negative")
+		return errors.New("cache-size can't be negative")
 	}
 	if cfg.MaxTxBytes < 0 {
-		return errors.New("max_tx_bytes can't be negative")
+		return errors.New("max-tx-bytes can't be negative")
 	}
 	return nil
 }
@@ -716,15 +742,13 @@ func (cfg *MempoolConfig) ValidateBasic() error {
 
 // StateSyncConfig defines the configuration for the Tendermint state sync service
 type StateSyncConfig struct {
-	Enable              bool          `mapstructure:"enable"`
-	TempDir             string        `mapstructure:"temp_dir"`
-	RPCServers          []string      `mapstructure:"rpc_servers"`
-	TrustPeriod         time.Duration `mapstructure:"trust_period"`
-	TrustHeight         int64         `mapstructure:"trust_height"`
-	TrustHash           string        `mapstructure:"trust_hash"`
-	DiscoveryTime       time.Duration `mapstructure:"discovery_time"`
-	ChunkRequestTimeout time.Duration `mapstructure:"chunk_request_timeout"`
-	ChunkFetchers       int32         `mapstructure:"chunk_fetchers"`
+	Enable        bool          `mapstructure:"enable"`
+	TempDir       string        `mapstructure:"temp-dir"`
+	RPCServers    []string      `mapstructure:"rpc-servers"`
+	TrustPeriod   time.Duration `mapstructure:"trust-period"`
+	TrustHeight   int64         `mapstructure:"trust-height"`
+	TrustHash     string        `mapstructure:"trust-hash"`
+	DiscoveryTime time.Duration `mapstructure:"discovery-time"`
 }
 
 func (cfg *StateSyncConfig) TrustHashBytes() []byte {
@@ -739,10 +763,8 @@ func (cfg *StateSyncConfig) TrustHashBytes() []byte {
 // DefaultStateSyncConfig returns a default configuration for the state sync service
 func DefaultStateSyncConfig() *StateSyncConfig {
 	return &StateSyncConfig{
-		TrustPeriod:         168 * time.Hour,
-		DiscoveryTime:       15 * time.Second,
-		ChunkRequestTimeout: 10 * time.Second,
-		ChunkFetchers:       4,
+		TrustPeriod:   168 * time.Hour,
+		DiscoveryTime: 15 * time.Second,
 	}
 }
 
@@ -755,49 +777,30 @@ func TestStateSyncConfig() *StateSyncConfig {
 func (cfg *StateSyncConfig) ValidateBasic() error {
 	if cfg.Enable {
 		if len(cfg.RPCServers) == 0 {
-			return errors.New("rpc_servers is required")
+			return errors.New("rpc-servers is required")
 		}
-
 		if len(cfg.RPCServers) < 2 {
-			return errors.New("at least two rpc_servers entries is required")
+			return errors.New("at least two rpc-servers entries is required")
 		}
-
 		for _, server := range cfg.RPCServers {
 			if len(server) == 0 {
-				return errors.New("found empty rpc_servers entry")
+				return errors.New("found empty rpc-servers entry")
 			}
 		}
-
-		if cfg.DiscoveryTime != 0 && cfg.DiscoveryTime < 5*time.Second {
-			return errors.New("discovery time must be 0s or greater than five seconds")
-		}
-
 		if cfg.TrustPeriod <= 0 {
-			return errors.New("trusted_period is required")
+			return errors.New("trusted-period is required")
 		}
-
 		if cfg.TrustHeight <= 0 {
-			return errors.New("trusted_height is required")
+			return errors.New("trusted-height is required")
 		}
-
 		if len(cfg.TrustHash) == 0 {
-			return errors.New("trusted_hash is required")
+			return errors.New("trusted-hash is required")
 		}
-
 		_, err := hex.DecodeString(cfg.TrustHash)
 		if err != nil {
-			return fmt.Errorf("invalid trusted_hash: %w", err)
-		}
-
-		if cfg.ChunkRequestTimeout < 5*time.Second {
-			return errors.New("chunk_request_timeout must be at least 5 seconds")
-		}
-
-		if cfg.ChunkFetchers <= 0 {
-			return errors.New("chunk_fetchers is required")
+			return fmt.Errorf("invalid trusted-hash: %w", err)
 		}
 	}
-
 	return nil
 }
 
@@ -826,8 +829,6 @@ func (cfg *FastSyncConfig) ValidateBasic() error {
 	switch cfg.Version {
 	case "v0":
 		return nil
-	case "v1":
-		return nil
 	case "v2":
 		return nil
 	default:
@@ -842,39 +843,38 @@ func (cfg *FastSyncConfig) ValidateBasic() error {
 // including timeouts and details about the WAL and the block structure.
 type ConsensusConfig struct {
 	RootDir string `mapstructure:"home"`
-	WalPath string `mapstructure:"wal_file"`
+	WalPath string `mapstructure:"wal-file"`
 	walFile string // overrides WalPath if set
 
 	// How long we wait for a proposal block before prevoting nil
-	TimeoutPropose time.Duration `mapstructure:"timeout_propose"`
-	// How much timeout_propose increases with each round
-	TimeoutProposeDelta time.Duration `mapstructure:"timeout_propose_delta"`
+	TimeoutPropose time.Duration `mapstructure:"timeout-propose"`
+	// How much timeout-propose increases with each round
+	TimeoutProposeDelta time.Duration `mapstructure:"timeout-propose-delta"`
 	// How long we wait after receiving +2/3 prevotes for “anything” (ie. not a single block or nil)
-	TimeoutPrevote time.Duration `mapstructure:"timeout_prevote"`
-	// How much the timeout_prevote increases with each round
-	TimeoutPrevoteDelta time.Duration `mapstructure:"timeout_prevote_delta"`
+	TimeoutPrevote time.Duration `mapstructure:"timeout-prevote"`
+	// How much the timeout-prevote increases with each round
+	TimeoutPrevoteDelta time.Duration `mapstructure:"timeout-prevote-delta"`
 	// How long we wait after receiving +2/3 precommits for “anything” (ie. not a single block or nil)
-	TimeoutPrecommit time.Duration `mapstructure:"timeout_precommit"`
-	// How much the timeout_precommit increases with each round
-	TimeoutPrecommitDelta time.Duration `mapstructure:"timeout_precommit_delta"`
+	TimeoutPrecommit time.Duration `mapstructure:"timeout-precommit"`
+	// How much the timeout-precommit increases with each round
+	TimeoutPrecommitDelta time.Duration `mapstructure:"timeout-precommit-delta"`
 	// How long we wait after committing a block, before starting on the new
 	// height (this gives us a chance to receive some more precommits, even
 	// though we already have +2/3).
-	// NOTE: when modifying, make sure to update time_iota_ms genesis parameter
-	TimeoutCommit time.Duration `mapstructure:"timeout_commit"`
+	TimeoutCommit time.Duration `mapstructure:"timeout-commit"`
 
 	// Make progress as soon as we have all the precommits (as if TimeoutCommit = 0)
-	SkipTimeoutCommit bool `mapstructure:"skip_timeout_commit"`
+	SkipTimeoutCommit bool `mapstructure:"skip-timeout-commit"`
 
 	// EmptyBlocks mode and possible interval between empty blocks
-	CreateEmptyBlocks         bool          `mapstructure:"create_empty_blocks"`
-	CreateEmptyBlocksInterval time.Duration `mapstructure:"create_empty_blocks_interval"`
+	CreateEmptyBlocks         bool          `mapstructure:"create-empty-blocks"`
+	CreateEmptyBlocksInterval time.Duration `mapstructure:"create-empty-blocks-interval"`
 
 	// Reactor sleep duration parameters
-	PeerGossipSleepDuration     time.Duration `mapstructure:"peer_gossip_sleep_duration"`
-	PeerQueryMaj23SleepDuration time.Duration `mapstructure:"peer_query_maj23_sleep_duration"`
+	PeerGossipSleepDuration     time.Duration `mapstructure:"peer-gossip-sleep-duration"`
+	PeerQueryMaj23SleepDuration time.Duration `mapstructure:"peer-query-maj23-sleep-duration"`
 
-	DoubleSignCheckHeight int64 `mapstructure:"double_sign_check_height"`
+	DoubleSignCheckHeight int64 `mapstructure:"double-sign-check-height"`
 }
 
 // DefaultConsensusConfig returns a default configuration for the consensus service
@@ -906,7 +906,6 @@ func TestConsensusConfig() *ConsensusConfig {
 	cfg.TimeoutPrevoteDelta = 1 * time.Millisecond
 	cfg.TimeoutPrecommit = 10 * time.Millisecond
 	cfg.TimeoutPrecommitDelta = 1 * time.Millisecond
-	// NOTE: when modifying, make sure to update time_iota_ms (testGenesisFmt) in toml.go
 	cfg.TimeoutCommit = 10 * time.Millisecond
 	cfg.SkipTimeoutCommit = true
 	cfg.PeerGossipSleepDuration = 5 * time.Millisecond
@@ -964,37 +963,37 @@ func (cfg *ConsensusConfig) SetWalFile(walFile string) {
 // returns an error if any check fails.
 func (cfg *ConsensusConfig) ValidateBasic() error {
 	if cfg.TimeoutPropose < 0 {
-		return errors.New("timeout_propose can't be negative")
+		return errors.New("timeout-propose can't be negative")
 	}
 	if cfg.TimeoutProposeDelta < 0 {
-		return errors.New("timeout_propose_delta can't be negative")
+		return errors.New("timeout-propose-delta can't be negative")
 	}
 	if cfg.TimeoutPrevote < 0 {
-		return errors.New("timeout_prevote can't be negative")
+		return errors.New("timeout-prevote can't be negative")
 	}
 	if cfg.TimeoutPrevoteDelta < 0 {
-		return errors.New("timeout_prevote_delta can't be negative")
+		return errors.New("timeout-prevote-delta can't be negative")
 	}
 	if cfg.TimeoutPrecommit < 0 {
-		return errors.New("timeout_precommit can't be negative")
+		return errors.New("timeout-precommit can't be negative")
 	}
 	if cfg.TimeoutPrecommitDelta < 0 {
-		return errors.New("timeout_precommit_delta can't be negative")
+		return errors.New("timeout-precommit-delta can't be negative")
 	}
 	if cfg.TimeoutCommit < 0 {
-		return errors.New("timeout_commit can't be negative")
+		return errors.New("timeout-commit can't be negative")
 	}
 	if cfg.CreateEmptyBlocksInterval < 0 {
-		return errors.New("create_empty_blocks_interval can't be negative")
+		return errors.New("create-empty-blocks-interval can't be negative")
 	}
 	if cfg.PeerGossipSleepDuration < 0 {
-		return errors.New("peer_gossip_sleep_duration can't be negative")
+		return errors.New("peer-gossip-sleep-duration can't be negative")
 	}
 	if cfg.PeerQueryMaj23SleepDuration < 0 {
-		return errors.New("peer_query_maj23_sleep_duration can't be negative")
+		return errors.New("peer-query-maj23-sleep-duration can't be negative")
 	}
 	if cfg.DoubleSignCheckHeight < 0 {
-		return errors.New("double_sign_check_height can't be negative")
+		return errors.New("double-sign-check-height can't be negative")
 	}
 	return nil
 }
@@ -1017,12 +1016,7 @@ type TxIndexConfig struct {
 	//   1) "null"
 	//   2) "kv" (default) - the simplest possible indexer,
 	//      backed by key-value storage (defaults to levelDB; see DBBackend).
-	//   3) "psql" - the indexer services backed by PostgreSQL.
 	Indexer string `mapstructure:"indexer"`
-
-	// The PostgreSQL connection configuration, the connection format:
-	// postgresql://<user>:<password>@<host>:<port>/<db>?<opts>
-	PsqlConn string `mapstructure:"psql-conn"`
 }
 
 // DefaultTxIndexConfig returns a default configuration for the transaction indexer.
@@ -1048,13 +1042,13 @@ type InstrumentationConfig struct {
 	Prometheus bool `mapstructure:"prometheus"`
 
 	// Address to listen for Prometheus collector(s) connections.
-	PrometheusListenAddr string `mapstructure:"prometheus_listen_addr"`
+	PrometheusListenAddr string `mapstructure:"prometheus-listen-addr"`
 
 	// Maximum number of simultaneous connections.
 	// If you want to accept a larger number than the default, make sure
 	// you increase your OS limits.
 	// 0 - unlimited.
-	MaxOpenConnections int `mapstructure:"max_open_connections"`
+	MaxOpenConnections int `mapstructure:"max-open-connections"`
 
 	// Instrumentation namespace.
 	Namespace string `mapstructure:"namespace"`
@@ -1081,7 +1075,7 @@ func TestInstrumentationConfig() *InstrumentationConfig {
 // returns an error if any check fails.
 func (cfg *InstrumentationConfig) ValidateBasic() error {
 	if cfg.MaxOpenConnections < 0 {
-		return errors.New("max_open_connections can't be negative")
+		return errors.New("max-open-connections can't be negative")
 	}
 	return nil
 }

config/config_test.go

@@ -133,7 +133,7 @@ func TestFastSyncConfigValidateBasic(t *testing.T) {
 	assert.NoError(t, cfg.ValidateBasic())
 
 	// tamper with version
-	cfg.Version = "v1"
+	cfg.Version = "v2"
 	assert.NoError(t, cfg.ValidateBasic())
 
 	cfg.Version = "invalid"