* s3: support AWS object form for bucket policy Principal, add NotPrincipal
Bucket policy statements only accepted a bare string or array of strings for
the Principal element, so the AWS-documented object form was rejected:
"Principal": { "AWS": "arn:aws:iam::123456789012:root" }
"Principal": { "AWS": ["arn:...", "999999999999"] }
Add a PolicyPrincipal type that parses the bare string, the bare array
(retained for backward compatibility), and the object form keyed by AWS,
Service, Federated or CanonicalUser (each value a string or array). All keyed
values are flattened for principal matching, and the original JSON is preserved
so PutBucketPolicy/GetBucketPolicy returns the exact shape submitted - keeping
infrastructure-as-code tools (Terraform, Ansible) idempotent.
Also add NotPrincipal support (a statement applies to every principal except the
ones named), compiled and evaluated in both policy evaluators, and reject
statements that specify both Principal and NotPrincipal.
* s3: address review - validate principal object form, honor dynamic NotPrincipal
- Reject unsupported Principal object keys (only AWS/Service/Federated/
CanonicalUser) and empty values, so a form like {"AWS":[]} no longer compiles
to zero matchers and silently relies on the match-all fallback.
- Detect both Principal and NotPrincipal by field presence, not by flattened
length, so a present-but-empty field is still rejected.
- Honor dynamic (policy-variable) NotPrincipal/Principal patterns in the
compiled evaluator; previously a NotPrincipal made only of variables was
treated as absent and its exclusion bypassed.
- Add regression tests for the object-form validation and dynamic NotPrincipal.
* Review comment removed unnecessary success and failure count
* fix: use Gather.Gather() with seeded counter for EC rebuild registration test
- Restore Gather.Gather() to verify MustRegister calls as requested in review
- Seed VolumeServerECRebuildCounter before gathering because CounterVec
only appears after at least one label value is observed
- Use correct fully-qualified metric names (SeaweedFS_volumeServer_*)
* fix: remove preflight checkEcVolumeStatus failure from ec_rebuild_total counter
ec_rebuild_total should only reflect actual rebuild execution failures
(from RebuildEcFiles / RebuildEcxFile), not scan/precheck failures in
the volume status loop. The error is still returned to the caller;
only the misleading counter increment was removed.
* Review comment removed unnecessary observe
* label EC rebuild duration histogram by result
Without a result label, fast failures pull down the success-latency
quantiles shown on the EC Rebuild Duration panel. Make the histogram a
HistogramVec keyed by result, record success/failure through one
recordEcRebuild helper, and split the Grafana quantiles by (le, result).
* reset EC rebuild metric vecs in registration test
The HistogramVec needs a child before Gather emits it, so the test must
observe once; reset both vecs in cleanup so that sample doesn't leak into
other tests.
---------
Co-authored-by: Ubuntu User <ubuntu@example.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
An empty or truncated tasks/*.pb file unmarshals into a TaskStateFile
with a nil Task, and protobufToMaintenanceTask dereferenced it
immediately, panicking the whole admin process on startup. Guard the
nil case so the loader logs a warning and skips the bad file.
Under a herd of concurrent assigns with no writable volume, Assign spun
PickForWrite for the full 10s timeout, pinning a goroutine per request and
starving the master of the cycles it needs to process growth and answer
heartbeats. When growth is the relevant remedy and already in flight, stop
spinning: if free space exists, shed with a fast retryable error so clients
back off and retry once growth lands; if the cluster is out of space, fail fast
with the real out-of-space error instead of masking it as retryable.
The gRPC shed uses ResourceExhausted, not Unavailable: operation.Assign retries
it, but the client connection layer doesn't treat it as a dead channel, so a
per-request shed across a herd doesn't tear down the shared master connection
and cancel every other in-flight assign. The HTTP dirAssignHandler sheds with
503 + Retry-After.
* volume server: route VolumeMarkReadonly to raft leader
After a master raft election, volume servers may still heartbeat a follower
while admin paths such as weed shell volume.mark call notifyMasterVolumeReadonly
via vs.GetMaster(). Followers reject VolumeMarkReadonly with NotLeader, which
breaks tiering and other mark-readonly workflows until the heartbeat loop
reconnects.
Resolve the leader through GetMasterConfiguration on configured -master peers
(same Leader field filer/master clients already use) before calling
VolumeMarkReadonly. When the leader differs from the heartbeat peer, update
currentMaster so the heartbeat loop converges faster.
Adds operation.LookupRaftLeaderMaster with unit tests.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix: address review feedback on volume.mark raft leader routing
Do not update currentMaster during leader lookup — heartbeat owns that
field and uses stream GetLeader() to reconnect. Try the heartbeat peer
first and only resolve the raft leader after a NotLeader rejection.
Add ctx.Err() early exit and quieter logging for context cancellation.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(operation): thread the lookup timeout ctx into connection invalidation
The 5s timeout drove only the RPC; WithMasterServerClient saw the
unbounded outer ctx, so a self-inflicted timeout (slow GetMasterConfiguration
during an election) was treated as a stale channel and tore down the shared
master connection. Pass the timeout ctx into the helper so its own expiry
leaves ctx.Err() set and spares the connection.
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(filer.sync.verify): sort listings client-side before merge
The merge walks both filers' directory listings in lockstep and needs
them in the same byte order. A filer before 4.32 with a locale SQL
collation lists case-insensitively while a 4.32+ peer lists byte-ordered,
so comparing two such clusters returns the same names in a different
order and the merge desyncs into spurious MISSING / ONLY_IN_B.
Buffer and sort each directory client-side so both sides agree on order
regardless of filer version or store backend. Trades the streaming
source's O(buffer) memory for O(directory) per side, fine for a one-shot
verify CLI; both sides still load concurrently.
Claude-Session: https://claude.ai/code/session_01BKsBdKYFNCEjeHLjJfumPF
* fix(filer.sync.verify): surface listing errors before merging
A listing that fails mid-stream leaves a partial, unsorted buffer. Now
that both sides are fully buffered anyway, check each side's error right
after the loads finish and before the merge, so partial entries can't
emit spurious MISSING / ONLY_IN_B before the error aborts the run.
Claude-Session: https://claude.ai/code/session_01BKsBdKYFNCEjeHLjJfumPF
* fix(shell): correct volume.list -writable filter unit and comparison
* fix(shell): correct volume.list -writable filter unit and comparison
* chore(shell): fix typo in EC shard helper param names
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* refactor(shell): drop nil sentinel in splitCSVSet, use len() in callers
* fix: apply collectionPattern during detection in volume.fix.replication
* use existing wildcard.MatchesWildcard for collection matching
It returns a plain bool, so drop the up-front filepath.Match validation
and the path/filepath import that only existed to handle its error.
* trim verbose comments to terse one-liners
* drop redundant per-path collection guards
Detection already filters by replicas[0].info.Collection. The repair guard
re-checked pickOneReplicaToCopyFrom's collection (a different replica), so a
mixed-collection volume could pass detection yet be skipped in repair without
decrementing the counter, spinning the -apply loop. deleteOneVolume keeps its
collectionIsMismatch safety.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
mount: move directory cache state to a side map to shrink InodeEntry
The mount keeps an InodeEntry alive for every inode the kernel references.
On a mount that is almost entirely regular files, each entry carried the full
directory readdir-cache bookkeeping (four time.Time fields plus counters),
bloating it to 152 bytes whether or not the inode was a directory.
Move that state into a dirState held in a side map keyed by inode, and drop the
isDirectory bool: an inode is a directory iff it has a dirState. InodeEntry is
now just paths + nlookup at 32 bytes, landing in a smaller Go allocator size
class; on a mount with tens of millions of cached file inodes that is several GB
less resident heap. As a side effect the readdir-cache scan helpers iterate only
directories instead of every inode.
* fix(volume): fsync .vif and downloaded tier .dat (Rust)
save_volume_info wrote the .vif with a plain write and no fsync, and the
tier download never synced the .dat it wrote. Either could be lost on a
crash before the tier-down path acts on them. fsync both, matching the Go
volume server's util.WriteFile and DownloadFile.
* fix(volume): swap to local before deleting remote on tier-down (Rust)
The tier-down path deleted the shared remote object before trimming the
.vif, so a crash in between left the volume's .vif pointing at a deleted
object. It also dropped the remote backend only on the delete path and
never opened the downloaded local .dat, so reads broke until reload and a
keep-remote download kept serving from the slow remote object.
Trim the .vif and swap to the local .dat on both paths, bracketed by
directory fsyncs, before removing the remote object; gate only the object
removal on keep_remote_dat_file. Matches the Go volume server's crash-safe
ordering.
After VolumeTierMoveDatToRemote uploaded the .dat, the volume closed its
local backend but never opened the remote one, leaving both dat_file and
remote_dat_file empty. The needle read path has no lazy reopen, so reads
returned "dat file not open" until the volume reloaded.
Switch to the remote backend right after saving the .vif, the same as the
Go volume server's LoadRemoteFile, so the volume keeps serving from remote
storage immediately after tiering.
* ci: add per-process memory sampler for perf jobs
Samples VmRSS once a second into a CSV and records peak VmHWM per process
on stop. Linux only; reads /proc/<pid>/status.
* ci: run perf benchmarks on the Rust volume server and report memory
Matrix the throughput and S3 jobs over go/rust volume servers, using a
standalone master (plus filer for S3) and swapping only the volume binary
so the two are directly comparable. Sample peak RSS in every job and surface
it per impl in the run summary.
* ci: harden mem sampler arg handling and peak fallback
Guard against missing args under set -u, and fall back to the max RSS
sampled when a process exits before VmHWM can be read.
* ec: recover EC shards whose .ecx index lives only on a peer server
A volume server that boots with EC shard files on disk but no .ecx index
on any local disk cannot mount the shards, so the master never learns
about them. ec.rebuild works off master-registered shards, so it sees the
volume as short and gives up even though the shard data is intact.
Add an operator-triggered recovery: VolumeEcShardsMount gains a
recover_missing_index flag that makes the volume server fetch the missing
.ecx (plus .ecj/.vif) from a peer holding it and mount the on-disk shards.
ec.rebuild runs this across the cluster before planning, so orphaned
shards register and the rebuild sees the true shard set.
.ecx is an immutable encode-time index, identical on every holder. .ecj
is a per-holder deletion journal that differs across holders, so the
recovered node adopts the source peer's deletion view, like a balanced or
rebuilt shard does.
* ec: mirror missing-index recovery into the Rust volume server
Port the #10104 recovery to seaweed-volume so the Rust volume server
self-heals the same layout: EC shards on disk with the .ecx index only on
a peer. Adds collect_ec_volumes_missing_index / mount_recovered_ec_shards
to the store, recover_missing_ec_indexes (master LookupEcVolume + peer
CopyFile fetch + mount) to the server, and the recover_missing_index flag
on VolumeEcShardsMount.
.ecx is the immutable encode-time index, identical on every holder. .ecj
is a per-holder deletion journal, so the recovered node adopts the source
peer's deletion view, matching the Go path.
* fix(volume): stream copy_file from disk instead of buffering whole file
copy_file pushed every 2MB chunk into a Vec and only then returned tokio_stream::iter(results), so serving a near-limit volume as a copy source (e.g. during volume.fix.replication) held the entire .dat resident and could OOM the process. Stream chunks through a bounded mpsc channel from a spawn_blocking reader instead; caps memory at ~16MB per transfer with backpressure.
* fix(volume): stream volume_incremental_copy from disk instead of buffering
Same buffering pattern as copy_file: every 2MB chunk was pushed into a Vec and only then returned via tokio_stream::iter, holding the entire delta resident. Stream the byte range from an owned file handle through a bounded mpsc channel, mirroring the copy_file fix.
* test(volume): cover streaming copy_file and volume_incremental_copy
Adds a multi-chunk .dat fixture and tests asserting both handlers stream in 2MB chunks (multiple messages), reassemble byte-for-byte, carry modified_ts_ns only on the first copy_file message, and honor stop_offset.
* address review: use u64 byte counters; stream local incremental copy without holding the store lock
- copy_file/volume_incremental_copy: track remaining bytes and offsets as u64 instead of casting uint64 stop_offset/dat_size through i64 (CodeRabbit).
- volume_incremental_copy: for local volumes open the .dat and stream directly with no lock held; only remote/tiered volumes take the per-chunk read_dat_slice path, so a remote S3 read is never performed while holding the store read lock (Gemini).
* volume (Rust): stream tiered incremental copy off the store lock, open .dat under it
Capture the reader for volume_incremental_copy while the volume lookup is still
under the store read lock: an open File for local volumes, a cloned remote
backend handle for tiered ones. Then drop the lock and stream with none held.
Opening under the lock pins the reader to the volume that exists now, so a
concurrent delete/recreate can't stream from the wrong file, and a slow S3
fetch for a tiered .dat no longer blocks store writers (the remote path
previously re-took the store lock per chunk).
Use a non-uniform copy-test payload so chunk reassembly catches duplicated or
reordered chunks a repeated byte would hide.
* volume (Rust): return empty when incremental-copy start offset is past the .dat
A corrupt needle index could locate an offset beyond the captured .dat size,
underflowing the dat_size - start_offset subtraction (panic in debug, wrap in
release). Guard it up front like the other empty-delta early returns.
---------
Co-authored-by: adri <adri@digitalunited.net>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
Drop max-parallel so the 13 per-platform builds run together instead of two
waves of 8 (rocksdb was queuing behind the cap and starting ~8 min late).
Keep cache-to mode=max for rocksdb: its RocksDB static_lib compile is
sha-independent, so it caches across releases and stops being the ~16-min
long-pole that gates the merge fan-in. go-build variants stay mode=min.
docker release: build per-platform on native runners, drop mode=max cache
The build job built every platform of a variant on one runner, so 2-4 Go
cross-compiles fought over a single 2-vCPU box and arm64 ran in an emulated
context. Split the matrix to one platform per job on a native runner
(amd64/386 on ubuntu-latest, arm64/arm-v7 on ubuntu-24.04-arm); only arm/v7
still needs QEMU, and only for its final apk stage. Each job pushes by
digest, and a new merge job assembles the multi-arch tag with imagetools
and mirrors it to Docker Hub.
cache-to mode=max -> mode=min: BRANCH=sha cache-busts the heavy go-build
layer every release, so writing all intermediate layers to the gha backend
spent 3-11 min per variant on a cache the next release's sha can never hit.
* test: add self-contained S3 read/write load tool
Concurrent PUT/GET against the S3 gateway, reporting requests/sec,
transfer rate, and latency percentiles. Built on the aws-sdk-go-v2
client the S3 tests already use, so no extra benchmark binary is needed.
* ci: add performance workflow
Three parallel jobs: cpu/heap pprof of the server under write load,
native throughput via weed benchmark plus the Go micro-benchmarks, and
an S3 read/write benchmark against the gateway. Runs on push to master
and manual dispatch with tunable duration, object count, size, and
concurrency.
* sts: enforce session-policy explicit deny during role chaining
A chained AssumeRole caller authenticates with an STS session token whose
inline session policy can explicitly deny sts:AssumeRole. The deny check only
evaluated the caller's named policies, so such a session could still chain into
any role its trust policy admits. Validate the session token in the deny check
and honor an explicit Deny in the inline session policy too.
* test(sts): integration coverage for AssumeRole authorization
Add an end-to-end AssumeRole authorization test (real weed mini + boto3):
a non-admin caller assumes a role its trust policy admits, an explicit
identity-side deny is blocked, and a session policy's explicit deny blocks
role chaining.
* sts: skip OIDC tokens and reject revoked sessions in the chaining deny check
Review follow-ups on the session-policy deny check:
- Guard session validation with !isOIDCToken so a bearer token our STS service
cannot validate does not error into a false deny.
- Reject a revoked session before evaluating its policy, restoring the
revocation enforcement the AssumeRole path lost when it stopped routing
through IsActionAllowed.
* fix(sts): authorize AssumeRole by the role's trust policy
The role's trust policy already declares who may assume it, but the caller
also had to pass an identity-side sts:AssumeRole check that only the Admin
action could satisfy — legacy static identities have no way to express
sts:AssumeRole on a role. So assuming any role required a full admin
identity. Drop the redundant check and let the trust policy be the authority;
scope it to specific principals to restrict who can assume.
* sts: resolve caller principal ARN for the trust-policy check
A legacy static identity can reach AssumeRole without a PrincipalArn set;
passing the empty value would miss a trust policy that names a concrete
principal. Resolve it to the canonical user ARN, sharing the logic
GetCallerIdentity already used inline.
* sts: enforce explicit identity-side deny for AssumeRole
Authorizing a named role by its trust policy alone dropped identity-side
evaluation entirely, so a caller whose attached policy explicitly denies
sts:AssumeRole could still assume any role the trust policy admits. Re-check
the caller's policies through the IAM manager for an explicit deny
(deny-always-wins) without requiring an allow; the trust policy stays the
allow authority.
* fix(postgres): prevent uint32 underflow & OOM in message parsing
* postgres: drop redundant startup guard, use maxStartupMessageSize const
The msgTotalLen < 8 check already guarantees msgLength >= 4, so the extra
msgLength < 4 guard before reading the protocol version was unreachable.
Point the startup size limit at maxStartupMessageSize instead of a literal.
* postgres: trim query terminator safely, cap pre-auth payloads
Use strings.TrimSuffix for the simple-query null terminator so a
non-null-terminated body isn't silently shortened, matching the auth
handlers. Bound password/MD5 reads with a dedicated maxAuthMessageSize
(10 KiB) instead of the 100 MiB maxMessageSize, since these payloads are
read before authentication.
---------
Co-authored-by: shangshuhan <shangshuhan@cmict.chinamobile.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
A FUSE interrupt is not a process kill. Go's async preemption (SIGURG)
makes a close() under load emit an interrupt on nearly every flush, so
deriving the metadata-flush context from the FUSE cancel channel turned
healthy concurrent close()s into EIO: the interrupt cancelled the
in-flight CreateEntry, which surfaced as "input/output error".
Bound the flush with a deadline instead. A healthy CreateEntry finishes
in well under a second, so the deadline only fires against a genuinely
stuck filer -- still keeping close() from hanging forever -- while
benign preemption no longer aborts a good flush.
Introduce security.BearerPrefix ("Bearer ", RFC 6750) and use it
everywhere an "Authorization: Bearer <token>" header is constructed,
replacing the scattered "BEARER "/"Bearer " string literals. SeaweedFS
matches the scheme case-insensitively when parsing (security.GetJwt), so
behavior is unchanged; this removes the magic string and settles the
casing on the standard form. The parser's upper-case comparison stays as
is on purpose.
The /?proxyChunkId= endpoint forwards the caller's headers to the volume
server but never mints a read token, so proxied chunk reads return 401
once jwt.signing.read.key is configured. Generate a fileId-scoped volume
token the same way the direct filer read path does, which fixes
filer.sync, filer.backup, filerProxy mounts, the MQ broker and the upload
gateway in one place.
* build(deps): bump com.fasterxml.jackson.core:jackson-databind
Bumps [com.fasterxml.jackson.core:jackson-databind](https://github.com/FasterXML/jackson) from 2.18.6 to 2.22.0.
- [Commits](https://github.com/FasterXML/jackson/commits)
---
updated-dependencies:
- dependency-name: com.fasterxml.jackson.core:jackson-databind
dependency-version: 2.22.0
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
* build(deps): pin jackson-annotations to its own 2.22 version
jackson-annotations dropped the patch digit in 2.20 and releases on its
own line, so 2.22.0 does not exist. Sharing jackson.version broke
dependency resolution; give it a dedicated property.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* s3: replicate by fanning out from the gateway to every holder
The S3 gateway uploaded each chunk to one volume server, which then
relayed the copies to the other replica holders. The gateway now uploads
each chunk to every holder in parallel (type=replicate), removing the
primary volume server's receive-then-resend relay.
AssignVolume returns every replica holder (new repeated Location replicas,
forwarded from the master assign), the s3api captures them, and the
chunked uploader fans out whenever a chunk has more than one holder.
Cipher uploads keep the server-driven path since per-call encryption would
diverge the replicas.
* s3: cancel sibling replica uploads on the first failure
* s3: trim replica fan-out comments
* s3: roll back successful fan-out chunk copies when a holder fails
A failed fan-out records no FileChunk, so copies that landed on the holders
that finished before the cancel were leaked as orphans the caller could not
see. Track the holders that succeeded and delete the needle from each
(type=replicate, local-only) on failure, leaving nothing behind.
fix(wdclient): prevent stale cache fallback for empty volume locations
## Problem
During Kubernetes pod restarts, volume servers temporarily disconnect and their
locations are removed from vidMap. The deleteLocation function leaves an empty
array [] in vid2Locations map instead of removing the key entirely.
GetLocations() was checking 'if found && len(locations) > 0', which would fail
for empty arrays and fall back to the cache chain, returning STALE locations
from before the restart. This caused S3 gateway to try connecting to old pod
IPs that no longer exist, resulting in connection timeouts and hanging registry
sync jobs.
Example timeline:
1. Volume pod at 10.131.1.28:8081 registers volumes 10,12
2. S3 gateway caches: vid2Locations[10] = [10.131.1.28:8081]
3. Pod restarts, gets new IP 10.131.1.65:8081
4. Master sends delete → vid2Locations[10] = [] (empty, but key exists)
5. BUG: GetLocations(10) sees found=true, len=0 → falls back to cache
6. Returns stale 10.131.1.28:8081 instead of waiting for new location
7. S3 requests timeout trying to reach unreachable old IP
## Solution
Distinguish between two cases:
- found=true, locations=[] : Volume explicitly has no locations (e.g. restart)
→ Return nil, false (no fallback to cache)
- found=false : Volume never seen in current map
→ Check cache (preserve cache benefits for unknown volumes)
An empty array explicitly means 'this volume currently has no locations',
which is semantically different from 'volume unknown'. Don't fall back to
stale cache for explicitly empty volumes.
## Testing
Added comprehensive tests:
- TestGetLocationsEmptyArrayNoFallback: Verifies empty arrays don't use cache
- TestGetLocationsUnknownVolumeUsesCache: Verifies unknown volumes still use cache
- All existing tests pass
## Impact
Fixes registry sync job hangs during SeaweedFS upgrades/restarts. S3 gateway
will now correctly wait for updated volume locations instead of using stale
cached IPs.
Related: OutSystems.SeaWeedfs Helm chart, vega cluster incident 2026-06-24
A config-file reload (SIGHUP) routed through MergeS3ApiConfiguration,
which skips identities marked static so dynamic admin/filer updates can't
clobber them. That also blocked the config file itself from updating its
own identities, so editing a secretKey and reloading had no effect.
Thread a fromStaticFile flag from the file-load path into the merge: the
authoritative file overwrites its static identities (and reapplies service
accounts under them), while dynamic updates still leave them immutable.
Mark the rebuilt identities static in the merge so a concurrent
RemoveIdentity never observes them as removable mid-reload.
Standalone weed s3 created a master client and registered the receiving
SeaweedS3IamCache gRPC service, but never wrapped its credential store
with the propagating store. Only the filer-embedded path called
SetMasterClient, so IAM mutations on one s3 pod never reached peers; they
served a stale in-memory identity cache and returned InvalidAccessKeyId
until restarted.
Wrap the credential store with the master client when one is available,
mirroring the filer path, so mutations fan out over the existing gRPC
cache service.
* s3tables: allow hyphens in namespace and table names
Iceberg REST clients routinely use hyphenated namespace/table names, but the
S3 Tables charset (a-z, 0-9, _) rejected them with 400. Accept '-' as an
interior character (names must still start, and namespaces end, with a letter
or digit), making the catalog conformant for those clients. A permissive
superset of the AWS S3 Tables charset.
* s3tables: allow hyphens in table ARN parsing too
The ARN regexes still excluded '-', so parseTableFromARN rejected ARNs with
hyphenated namespace/table names and existing reject-the-hyphen tests broke.
Widen the ARN patterns to match the validator, retarget those tests at a
still-invalid leading-hyphen name, and cover ARN parsing with hyphens.
* s3tables: purge decoupled table data without deleting the reused name path
A renamed or created-over-leftover table keeps its data at a location that
differs from its catalog name path. Drop now purges that data location and
clears the marker, instead of recursively deleting the name path, which may
still hold another table's data.
* iceberg: route a table created over a leftover to a unique location
When the default location is occupied by a leftover directory (data kept when
another table was renamed to this name), create the new table at a unique
location so it cannot overwrite that table's metadata. Common case is unchanged.
* iceberg: fail table create when the leftover-path check errors
A transient filer lookup error fell through as "not occupied", routing the
new table back to the default path and risking the very overwrite this check
guards against. Propagate the error and return 500 instead.
* s3tables: assert all catalog xattrs cleared on decoupled drop
Seed the full marker set so the test catches a regression that leaves the
policy, tags, version, or entry-type attribute on the reused name path.
* s3tables: refuse to drop a table whose data path is an ancestor
Corrupt metadata can resolve the data path to the bucket or namespace root,
which the bucket-scope check still admits; a recursive purge there would wipe
sibling tables. Reject an ancestor data path before deleting.
A directory rebuild wiped the cached children, listed the filer once, and
published the directory authoritatively cached over whatever came back. A
transient empty listing -- a momentary list-stream glitch that ends as a
clean EOF with no entries -- then stranded a populated directory cached
over an empty store, hiding every file in it until some unrelated event
happened to rebuild it: stat returns ENOENT and readdir returns nothing
though the files are safe on the filer, and nothing re-triggers a build.
Re-read the directory when the listing comes back empty before trusting
it. The first re-read is immediate, since the likely transient clears on a
fresh stream; later attempts space out. A genuinely empty directory still
lists empty every time and caches as before, so only empty listings pay
the extra read.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
With default_permissions (the mount default) the kernel enforces unix
permission bits from the getattr/lookup attributes before it ever calls
Open, Create, or Mknod. The mount was re-checking permissions in
AcquireHandle and createRegularFile anyway, which duplicated the kernel's
work and kept the supplementary-group lookup on the per-file hot path.
Gate only the mode-bit access check on default_permissions being off, so
a non-root copy does no permission work on open/create. createRegularFile
still loads the parent to validate it exists, since the create RPC skips
the filer-side parent check. With default_permissions off the mount
remains the sole enforcer, so the full check still runs.
* operation: bound AssignVolume with a deadline
AssignVolume ran on context.Background(), so when the filer is overwhelmed
the RPC could block indefinitely and wedge every caller holding the
connection. Give it a 30s deadline so a stuck assign fails and the caller's
retry/error path runs instead of hanging forever.
* mount: abort flush when the FUSE request is interrupted
On close(), a killed process blocks in fuse_flush waiting for the mount to
answer. doFlush ran its metadata CreateEntry on context.Background() and
ignored the kernel interrupt channel, so against an overwhelmed filer the
flush never completed and the process stayed in uninterruptible sleep --
making the pod un-killable.
Derive a context from the FUSE cancel channel in Flush/Fsync and thread it
through doFlush -> flushMetadataToFiler -> streamCreateEntry; the retry loop
stops as soon as the context is cancelled. Release and the pre-rename flush
keep a non-cancellable context since they must finish regardless.
* operation: harden the AssignVolume timeout test
Make the test double's signal send non-blocking and bound the receive with a
timeout so a regression can't wedge the test instead of failing it.
* fix(filer.backup): repair chunk-incomplete and stale destination entries
filer.backup left destinations diverged while metadata advanced — chunk-incomplete
(missing/gapped ranges at full attr.file_size) or holding a chunk superseded by a
missed overwrite. The skip/repair decision keyed on filer.FileSize (the attr),
which a truncated entry keeps full, so it never repaired.
Decide from actual chunk state instead:
- coversReference: range-by-range containment (scalar byte totals and attr
FileSize/Md5 cannot see chunk-level gaps).
- hasStaleBackupChunk: a backup-written chunk (SourceFileId) the source no longer
lists; ignores out-of-band (rsync/direct) chunks.
- destinationMatchesReference: allocation-free positional fast path gating the
above so they run only on divergence (the in-sync path stays cheap).
- A strictly-newer destination is never repaired, so an older out-of-order replay
cannot roll it back. The stale signal is deferred at equal mtime (same-second
versions cannot be ordered; reliable S3 sub-second ordering is a separate fix).
Tests in filer_sink_test.go.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* filer.backup: verify chunk range in destinationMatchesReference fast path
The allocation-free fast path matched a destination chunk to its reference
by SourceFileId alone. That is correct today only because replicateOneChunk
copies the source chunk's Offset/Size verbatim, so SourceFileId identity
implies an identical range — an invariant that lives in another file with no
guard linking the two. If replication ever re-chunks (split/coalesce), a
chunk with the right SourceFileId but a different range would fast-path as a
full match and skip a needed repair (a false positive in the very class this
change otherwise prevents).
Compare Offset/Size alongside SourceFileId so the fast path is self-contained
and can only be more conservative (a range mismatch falls through to the
precise coversReference/hasStaleBackupChunk checks). Add tests for a shifted
offset and a larger size at matching identity.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(filer): apply -filer.disk default to metadata log assigns
Metadata event log writes call operation.Assign directly and used only
FilerConf path rule DiskType. When filer.conf rules were missing or
unmatched, the master received an empty DiskType and grew volumes on the
built-in hdd layout.
Mirror resolveAssignStorageOption: wire FilerOption.DiskType into the
Filer, fall back when the matched path rule has no disk type, and return
the matched rule from resolveMetadataLogAssignDiskType to avoid duplicate
MatchStorageRule lookups.
Co-authored-by: Cursor <cursoragent@cursor.com>
* mini: fall back to -volume.disk for filer default disk type
weed server copies -volume.disk into the filer disk default when
-filer.disk is unset; weed mini did not, so metadata-log assigns sent
an empty disk type on clusters that only tag volumes (e.g. hot/warm).
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
The tyler-smith/go-bip39 repository was deleted from GitHub, so go mod
download fails for anyone resolving it directly (GOPROXY=direct). It
only reaches us transitively through rclone's internxt backend, which
calls IsMnemonicValid and NewSeed. Point it at cosmos/go-bip39, an
API-compatible and maintained fork.
handleCreateTable used a type assertion that fails through WithFilerClient's
'all filers failed' wrap, so a concurrent create that the pre-check missed
fell through instead of returning the existing table. Use errors.As.
* fix(shell): correct volume.list -writable filter unit and comparison
* fix(shell): correct volume.list -writable filter unit and comparison
* chore(shell): fix typo in EC shard helper param names
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* refactor(shell): drop nil sentinel in splitCSVSet, use len() in callers
* fix: avoid reading upload body when writing JSON errors
* s3tables: add RenameTable operation
* iceberg: support table rename
* iceberg: test table rename
* s3tables: keep table data in place on rename
rename is catalog-only: drop the source's catalog xattrs in place instead of recursively deleting its directory, which wiped the metadata.json and data files the renamed destination still points at. treat a missing table-metadata xattr as NoSuchTable in GetTable so the soft-deleted source name stops resolving.
* s3tables: test rename preserves data
make the in-memory filer honor recursive data deletion and seed the source table's metadata/ and data/ children, then assert a rename leaves them intact, the source name resolves to NoSuchTable, and the destination resolves to the preserved location.
* iceberg: map rename errors through wrapped manager error
* s3tables: authorize rename destination namespace
rename moved a table into the destination namespace after only checking the source, letting a source-authorized caller place tables in namespaces they don't control. require CreateTable on the destination namespace and bucket before writing.
* s3tables: purge renamed table data on drop
* s3tables: test table data dir derivation
s3: don't write 503 to a disconnected client during remote cache wait
When the remote-only cache poll returns without chunks, re-check the
request context before emitting 503 + Retry-After. A client that
disconnected during the wait surfaces as context.Canceled, which the
caller already handles silently; writing to the closed connection only
produced broken-pipe log noise.
* s3tables: tag table entries and exclude views from table listings
* s3tables: add view CRUD operations
* iceberg: support view create, load, exists, drop, and list
* iceberg: support view update
* iceberg: test view error classification and metadata round-trip
* iceberg: pre-check existence and write view metadata only after create
* iceberg: map view namespace-not-found to 404
* iceberg: test view create namespace-404 and duplicate no-clobber
* s3tables: tag view metadata and entry type atomically
CreateView wrote ExtendedKeyMetadata and ExtendedKeyEntryType in two
UpdateEntry calls, so a partial failure could leave a view directory
untagged. Add setExtendedAttributes to set both in one UpdateEntry.
* iceberg: roll back view registration when metadata write fails
The metadata file is written after the catalog registers the view. If
that write fails, drop the just-created view so it doesn't linger
pointing at a missing metadata.json. Reuse the DeleteView path via a
shared dropView helper.
* iceberg: support multi-table transaction commit
Add handleCommitTransaction for POST /v1/transactions/commit. Validation
is atomic across all table-changes (resolve, load, evaluate every
requirement before any write); metadata writes and pointer flips are
best-effort with rollback, so this is not crash-atomic.
* iceberg: route transactions/commit with and without prefix
* iceberg: test transaction commit request decoding
* iceberg: restore full prior table state on transaction rollback
* iceberg: test transaction rollback restores full prior table state
* iceberg: only clean up metadata for rolled-back tables
* s3tables: add RegisterTable op
* iceberg: support table register
* iceberg: test register table
* iceberg: parse engine-written metadata version from location
* iceberg: test metadata version parsing for both filename forms
* iceberg: map register errors through wrapped manager error
* iceberg: validate register metadata-location bucket and reject traversal
* iceberg: log register metadata load failure
* filer: treat a directory carrying object data as an S3 key object
A file promoted to a directory by a child write keeps its chunks, inline
content, or remote-tiered entry. Recognize that as a directory key object,
not only when a Mime is set, so the object still lists, demotes on delete,
and is not reclaimed by cleanup like the object it still is.
* filer: keep the empty-folder cleaner from reclaiming a promoted object
The cleaner skips directory key objects, but its check only looked at the
Mime. Mirror the chunks/content/remote check so a file promoted to a
directory is not deleted once its children are gone.
* s3: serve ranged GET for a directory that carries object data
Reject only zero-size directories so a file promoted to a directory streams
range requests instead of returning 404, while empty directories still 404.
* s3: return HEAD metadata for a directory that carries object data
HEAD now 404s a directory only when it has no data, so a promoted object is
retrievable while empty/implicit directories still fall back to LIST.
* feat: add collection.mark shell command
Add collection.mark to mark all existing normal volume replicas in a collection as readonly or writable. The command runs in preview mode by default and requires -apply to execute changes. It reuses existing volume mark RPCs, supports default collection aliases, skips EC shards, and adds unit tests for option parsing and target collection logic.
* Revert "feat: add collection.mark shell command"
This reverts commit 50c2bbf94c.
* feat: support marking volumes by collection
Add a -collection option to volume.mark so operators can mark every normal volume replica in a collection using existing topology data and volume mark RPCs.
The change keeps the single-volume path unchanged and adds tests for collection target selection, EC shard exclusion, and argument validation.
Co-authored-by: Codex <noreply@openai.com>
* volume.mark: reuse eachDataNode for collection traversal
* volume.mark: continue past per-volume failures and report progress
Collection marking aborted on the first failed RPC, leaving the
collection half-marked with no record of which volumes succeeded.
Mark every reachable volume, print per-volume progress to the writer,
and return an aggregated error naming the failures.
* volume.mark: let -collection _default target the unnamed collection
Other volume commands use the _default sentinel to match volumes with
no named collection; volume.mark could not reach them at all. Map
_default to the empty collection name in the filter.
---------
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* worker: don't leak task goroutines on forced shutdown
Stop() drains in-flight tasks for 30s, then terminates the manager loop.
A task still running past that deadline later reports completion through
w.cmds - getAdmin in completeTask, the ActionIncTask* send, removeTask -
but with the loop gone and cmds unbuffered, those sends and the response
reads behind getAdmin/getTaskLoad block forever, leaking the goroutine.
Close a done channel when the loop exits and route the task-goroutine
sends through it so they abort and return zero values instead of
blocking. getAdmin can now return nil mid-shutdown, so collapse its
double-call sites to a single nil-checked call to avoid a deref.
* worker: abort remaining manager-loop sends after shutdown
Extend the post-shutdown abort to the sends that still blocked: Stop()'s
own ActionStop (so a second Stop, e.g. an admin-shutdown timer racing an
explicit one, doesn't hang), setTask, and handleTaskCancellation. Route
them through w.done so they return instead of blocking when the loop is
gone. Stop is now idempotent.
* fix(chunk_cache): close data/index files on initialization error
* chunk_cache: assign outer err on the .dat open path
The error-path defer keys off the function-level err, but the .dat
OpenFile used := and shadowed it, so that path relied on nothing being
open yet rather than the cleanup invariant. Assign the outer err so
every error return is uniform.
* chunk_cache: verify descriptor closure on POSIX, not just Windows
os.Remove succeeds on open files on Linux/macOS, so the removal check
only proved closure on Windows. Compare the open-fd count before and
after the failed load; gate the removal check to Windows.
---------
Co-authored-by: Contributor <contributor@example.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* 修复weedfs_xattr.go 中 XATTR_REPLACE 语义缺失
* mount: fix XATTR_CREATE/XATTR_REPLACE flag semantics in setxattr
XATTR_CREATE fell through into the XATTR_REPLACE branch: creating a new
attribute hit the empty-oldData guard and returned ENODATA instead of
creating it, while creating over an existing attribute silently succeeded
without the EEXIST that setxattr(2) requires. Drop the fallthrough chain
so CREATE returns EEXIST when the attribute already exists, REPLACE
returns ENODATA when it is missing, and otherwise the value is written.
Test existence via the map lookup so an attribute with an empty value is
still treated as present.
---------
Co-authored-by: 王郁文 <wangyuwen@cmict.chinamobile.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix: Resolve inconsistent usage of error variables
* mysql2: guard nil DB on open failure and wrap connect error
---------
Co-authored-by: muminglei <muminglei@cmict.chinamobile.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* iceberg: return 400 for invalid namespace/table names
The S3 Tables name charset (a-z, 0-9, _) is stricter than the Iceberg
REST spec, so clients sending hyphens or uppercase hit a validation
error. That error fell through to 500; it's client input, so map it to
400 BadRequestException across the namespace and table handlers.
* iceberg: tighten name-validation error matching
Match the validator's own phrasings (invalid/must/cannot) instead of a
bare "namespace name"/"table name" substring, so an unrelated fault that
happens to mention a name isn't misreported as a 400. Lowercase first to
stay robust to message capitalization.
* iceberg: support namespace property updates
Add POST /v1/namespaces/{namespace}/properties to the REST catalog. It
applies the request's removals and updates and returns the removed/updated/
missing summary the spec defines. A new UpdateNamespace op on the S3 Tables
manager rewrites the stored namespace properties; AWS S3 Tables namespaces
have no properties, so this is the SeaweedFS-side backing for the catalog.
* iceberg: dedup namespace property removals
A key repeated in removals was deleted on its first occurrence, then
reported as missing on the next — landing in both removed and missing.
Skip keys already processed.
* iceberg: map namespace-update backend errors to REST statuses
UpdateNamespaceProperties returned 500 for every manager failure, masking
the namespace being dropped between read and write, or a denied caller.
Inspect the typed S3TablesError and answer 404/403 accordingly, 500 only
for the rest. Also replaces the GetNamespace not-found string match.
* iceberg: test the namespace-properties conflict path
Cover the 422 returned when a key appears in both removals and updates.
The check runs before any backend call, so it needs no filer.
* fix(s3api): preserve requested AES256 copy encryption
Problem
CopyObject metadata processing ignored an explicit x-amz-server-side-encryption: AES256 request header. A destination copy could lose the requested SSE-S3 metadata even though KMS requests were handled.
Root cause
processMetadataBytes only wrote the destination SSE header when the requested algorithm was aws:kms. Any other explicit SSE algorithm fell through to the source-preservation branch.
Fix
Write the requested SSE algorithm whenever x-amz-server-side-encryption is present, and keep KMS-specific metadata handling limited to aws:kms.
Co-authored-by: Codex <noreply@openai.com>
* fix(s3api): reject unsupported copy encryption algorithms
A mistyped or unsupported x-amz-server-side-encryption value on a copy
request slipped past validation and got persisted as the destination's
algorithm header, advertising encryption that was never applied. Reject
anything other than AES256 or aws:kms up front.
* fix(s3api): write SSE key metadata for empty encrypted copies
A zero-byte source copied with an explicit SSE request took the
no-content branch and never ran the encryption path, leaving the object
with a bare algorithm header but no key. HEAD then advertised SSE while
the encryption-state machine saw the header as orphaned. Run the inline
encryption path when the destination requests encryption so the key
metadata is written too.
* s3api: use SSEAlgorithmKMS constant in copy metadata handling
* test(s3api): cover source SSE preservation on copy
* test(iam): allow the local client's real source IP in SourceIp tests
The aws:SourceIp allow policies hardcoded the loopback CIDRs, but a CI
runner reaching the server over localhost can be observed with one of the
host's RFC1918 addresses (the S3 endpoint is advertised on a 10.x
interface), so the positive-condition PutObject was denied and the allow
assertion flaked while the deny path passed trivially. Broaden the allow
list to loopback plus private ranges via a shared helper, and log the
denial on each failed attempt so any residual failure is diagnosable.
---------
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
In ec_task.go, 23 fmt.Errorf calls used %v verb to wrap errors,
breaking the error chain introduced in Go 1.13. This prevents
callers from using errors.Is() and errors.As() to inspect the
underlying error type.
Changed all fmt.Errorf calls from %v to %w to properly wrap
errors, preserving the error chain for upstream callers.
Note: glog.* logging calls and fmt.Sprintf calls intentionally
keep %v as they are not error wrapping contexts.
Co-authored-by: 吴奇臻 <wuqizhen@cmict.chinamobile.com>
* build(deps): bump github.com/apache/iceberg-go from 0.5.0 to 0.6.0
Bumps [github.com/apache/iceberg-go](https://github.com/apache/iceberg-go) from 0.5.0 to 0.6.0.
- [Release notes](https://github.com/apache/iceberg-go/releases)
- [Commits](https://github.com/apache/iceberg-go/compare/v0.5.0...v0.6.0)
---
updated-dependencies:
- dependency-name: github.com/apache/iceberg-go
dependency-version: 0.6.0
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
* iceberg: adapt worker to iceberg-go 0.6.0 API
Fields() now yields iter.Seq2 (index, value); SortField.SourceID and
PartitionField.SourceID are methods backed by SourceIDs; RemoveSnapshots
takes a postCommit flag (false here, file cleanup runs through the filer).
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(shell): correct volume.list -writable filter unit and comparison
* fix(shell): correct volume.list -writable filter unit and comparison
* chore(shell): fix typo in EC shard helper param names
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* refactor(shell): drop nil sentinel in splitCSVSet, use len() in callers
* fix(shell): exclude failed EC shard copies from rebuild recoverability gate
prepareDataToRecover incremented the remote-shard counter before the copy
RPC, so in apply mode a failed VolumeEcShardsCopy was still counted toward
the DataShardsCount recoverability gate. The gate could then pass with
fewer real shards than required, deferring the failure to the deeper
generateMissingShards/reconstruct step and reporting an inflated shard
count in the "not enough shards" error.
Count the remote shard only after a successful copy (apply mode) or when
planning (dry-run), and rename wouldCopy to recoverableRemoteShards for
clarity. Add a regression test covering an apply-mode copy failure.
* fix(shell): clean up copied EC shards when the recoverability gate fails
A runtime copy failure can trip the gate after earlier copies already
succeeded, stranding those working shards on the rebuilder. Return the
copied shard ids on the error path and run the cleanup defer even when
recovery fails, so the temp shards get deleted.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(filer): propagate proxyChunkId query params to volume server
When weed mount reads via filer proxy mode (-volumeServerAccess=filerProxy),
the mount adds query params like readDeleted=true to chunk read requests.
Two bugs prevented these from working:
1. filer_server_handlers.go extracted fileId from the raw RequestURI, which
includes query params, corrupting the fileId (e.g. '6,abc&readDeleted=true').
Fix: use r.URL.Query().Get("proxyChunkId") for clean extraction.
2. filer_server_handlers_proxy.go didn't forward query params to the volume
server. The urlStrings from LookupFileId already contain the fileId in the
path, so just append the original query string.
* filer: match chunk proxy by query param, not URI prefix order
Order-dependent prefix slicing missed proxyChunkId when it wasn't the
first query param. Gate on root path and read the parsed query value.
* filer: drop internal proxyChunkId from proxied volume query
Lookup URLs already carry the fileId in the path, so forwarding the raw
query duplicated proxyChunkId onto the volume server. Strip it and only
append the remaining caller params (e.g. readDeleted).
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
util/http: lazily init the global HTTP client
GetGlobalHttpClient returned a nil client until InitGlobalHttpClient ran,
which only happens in weed.go's main. Anything that starts a command
in-process bypasses that: the admin server's metrics goroutine seeds a
dashboard sample on startup, reaching fetchPublicUrlMap -> GetGlobalHttpClient().Do,
and nil-derefs the receiver in GetHttpScheme.
Init the client on first Get via sync.Once so it is never nil regardless of
the startup path. InitGlobalHttpClient keeps its eager-init role through the
same Once.
prometheus/common v0.67.5, golang.org/x/sys v0.45.0, klauspost/compress
v1.18.6 to match the root module; readonly build was rejecting the stale
versions.
chore(deps): bump cassandra-gocql-driver to v2.1.2
Picks up upstream fixes for the Cassandra filer store: HostFilter panic
when a keyspace isn't replicated to every DC, broken system.peers
fallback, and pool connection errors under a small Session.Timeout.
* fix(s3api): sort repeated SigV4 query values
Problem
SigV4 canonical query strings must sort repeated parameter values. SeaweedFS preserved the incoming value order, so a correctly signed request with repeated query parameters could fail verification when the request order differed from canonical order.
Root cause
getCanonicalQueryString delegated directly to url.Values.Encode(), which sorts parameter names but preserves each key's value slice order.
Fix
Sort every query value slice before encoding the canonical query string, while still excluding X-Amz-Signature for presigned URLs.
Reproduction
go test ./weed/s3api -run TestGetCanonicalQueryStringSortsRepeatedValues -count=1 failed before the fix with partNumber=2 before partNumber=10.
Co-authored-by: Codex <noreply@openai.com>
* test(s3api): expand canonical query coverage
Co-authored-by: Codex <noreply@openai.com>
---------
Co-authored-by: Codex <noreply@openai.com>
* fix(shell): correct volume.list -writable filter unit and comparison
* fix(shell): correct volume.list -writable filter unit and comparison
* chore(shell): fix typo in EC shard helper param names
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* fix(shell): use exact match for volume.balance -racks/-nodes filter
The old strings.Contains-based filter quietly included any id that was a
substring of the user-supplied flag value (e.g. -racks=rack10 also matched
rack1). Replace it with an exact-match set parsed from the comma-separated
flag value, and add regression tests for both -racks and -nodes paths.
Also fix a small typo in the "remote storage" error returned by
maybeMoveOneVolume.
* refactor(shell): drop nil sentinel in splitCSVSet, use len() in callers
* feat(shell): support batched EC encode and multi-volume selection
Add -volumeIds (comma-separated) and -batchSize flags to ec.encode.
When -batchSize > 0, volumes are processed in independent batches, each
committed separately: encode -> rebalance -> verify -> delete originals.
This bounds the working set and lets source volumes be reclaimed without
waiting for the entire set to finish, at the cost of per-batch rebalancing.
Because each batch deletes its originals, a failure in a later batch is
unrecoverable for already-completed batches.
To let the single-volume, multi-volume, and collection paths share one
per-batch routine, the re-balance scope is now always derived from the
volumes actually selected for encoding (collectCollectionsForVolumeIds),
rather than every collection matching the -collection regex. Practical
effect: with -collection, a collection that matches the pattern but
contributes no encodable volumes is no longer re-balanced as a side effect.
The -volumeId path is unchanged; -batchSize=0 (default) preserves the
original single-pass flow.
The per-batch routine reuses the existing assertEncodableRegularVolumes
guard, doEcEncode skipped-node handling, and verifyEcShardsBeforeDelete
retry loop. The capacity pre-flight check takes the already-fetched
topology instead of issuing another VolumeList to the master per batch.
Also clarify the -collection flag description to note it accepts a regex
pattern, matching the existing command help.
-volumeId and -volumeIds are mutually exclusive; ids in -volumeIds are
validated and de-duplicated.
During leader election, MaybeLeader() returns empty string immediately (non-blocking),
causing master to return NotLeaderError without sending HeartbeatResponse.Leader.
Volume servers depend on HeartbeatResponse.Leader to discover the new leader address,
so they keep retrying the old leader and cannot switch.
Switching to Leader() restores the 20-second exponential backoff retry behavior,
ensuring volume servers receive the new leader address as soon as election completes.
* feat: add Prometheus metric for volume creation operations
Add VolumeServerVolumeCreationCounter metric to track volume creation
attempts by result (success/failure).
Changes:
- Add VolumeServerVolumeCreationCounter in weed/stats/metrics.go
- Instrument GrowByCountAndType in weed/topology/volume_growth.go
- Add unit tests in weed/stats/metrics_volume_creation_test.go
- Add Grafana dashboard panel for volume creation rate
This metric enables monitoring volume creation success/failure rates
in SeaweedFS clusters.
* fix: address CodeRabbit review - move failure counter before early return
- Move failure counter into loop else block before return statement
- Move success counter to after loop completion
- Strengthen test assertion from count < 1 to count != 2
- Add t.Cleanup() for test isolation in TestVolumeCreationCounterIncrement
* fix: count each volume create attempt and move metric to master subsystem
- topology runs on the master, so move volume_creation_total from the
volumeServer subsystem to master (SeaweedFS_master_volume_creation_total);
rename the var to MasterVolumeCreationCounter and group it with the other
master metrics.
- increment the counter per findAndGrow iteration instead of once per
GrowByCountAndType call: each logical volume is now counted, partial
successes before a failure are credited, and a targetCount==0 call no
longer records a spurious success.
- update the Grafana panel query and the unit tests; the registration test
now asserts via the shared Gather registry under the fully-qualified name.
* test: drop volume_creation metric tests
They only exercised the Prometheus client library (CounterVec increment and
registry collection), not any SeaweedFS behavior, so they carried maintenance
cost without verifying anything in this codebase.
---------
Co-authored-by: Ubuntu User <ubuntu@example.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* mini: resolve admin credentials from security.toml and env vars
weed mini started the admin UI without resolving admin.user/admin.password
(and the read-only pair) from security.toml [admin] or WEED_ADMIN_* env vars,
so the only way to protect the UI was the -admin.password flag. The standalone
weed admin command applies these fallbacks in runAdmin via applyViperFallback;
the mini path calls startAdminServer directly and skipped it, leaving
authRequired false and the UI unauthenticated.
* mini: load admin.toml maintenance settings
The mini admin path runs ApplyMaintenanceConfigFromToml (via startAdminServer)
against the global viper, but runMini never merged admin.toml, so file-based
maintenance task settings ([maintenance.vacuum], .balance, .erasure_coding)
were ignored under mini while the standalone weed admin honored them. Load it
alongside master/volume config.
* mini: support -admin.urlPrefix for the admin UI
Expose the reverse-proxy subdirectory prefix that the standalone weed admin
already supports, so the mini admin UI can run under e.g. /seaweedfs. The
prefix is normalized the same way and passed through to startAdminServer.
* feat: add Prometheus metrics for replication operations
Adds 5 metrics to instrument volume server replication (write/delete):
- Operations counter with success/failure labels
- Duration histogram for latency tracking
- Targets gauge for replica fanout
- Failures counter with error reason labels
- Under-replicated volumes gauge on master
* fix: record replication duration histogram only when replicaCount > 0
* fix: update replication targets gauge for all operations including zero
* fix: ensure symmetric replication success/failure counting and proper metrics updates
* fix: change VolumeServerReplicationTargets from Gauge to Histogram
- Replace .Set() with .Observe() in store_replicate.go (2 occurrences)
- Update test to use CollectAndCount for histogram assertion
- Rename TestReplicationTargetsGauge -> TestReplicationTargetsHistogram
- Update documentation to reflect Histogram type and PromQL examples
* Add comments to replication metrics and improve test coverage
* metrics: add replication panels to grafana dashboard
Master row gets an under-replicated volumes timeseries; Volume Servers
row gets replication operations, failures-by-reason, p99 duration, and
average fan-out panels for the new replication metrics.
* metrics: name the replication duration histogram replication_seconds
Match the volumeServer convention (request_seconds, vacuuming_seconds)
rather than the admin/lifecycle _duration_seconds spelling.
* metrics: guard replication fan-out panel against divide-by-zero
clamp_min the _count rate so the avg-targets ratio reads 0 instead of
NaN when there are no replication events in the window.
---------
Co-authored-by: Ubuntu User <ubuntu@example.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* mount: attach Content-MD5 to chunk uploads
Mount writes never set UploadOption.Md5, so FileChunk.ETag stays empty
and filer.ETag() degenerates to md5("")-N: same-size files compare
equal regardless of content, defeating metadata-level verification
like filer.sync.verify.
Compute each chunk's MD5 and send it as Content-MD5. The volume server
verifies it on ingest (rejecting in-flight corruption) and echoes it
back, persisting FileChunk.ETag like filer/S3 writes already do.
The dirty-page flush paths already pass a *util.BytesReader whose
backing slice is the whole chunk, so the digest is taken in place with
no extra read, copy, or allocation (UploadWithRetry unwraps it the same
way downstream). Only the rarer plain-reader callers (e.g. manifest
chunks) fall back to io.ReadAll. Skipped under -cipher, where only the
ciphertext reaches the server.
The digest encoding (std-base64 of the raw md5) is the contract the
volume server verifies against, so it is factored into contentMD5Base64
and covered by a unit test.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* mount: compute chunk Content-MD5 in the uploader, not the caller
Move the WantMd5 hashing into UploadWithRetry, where the chunk is already
buffered for the retry path, so saveDataAsChunk stops type-switching the
reader and re-reading plain readers. One materialization point, and the
cipher exclusion lives next to the hash instead of at every call site.
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* volume: detect phantom volumes held open as deleted FDs
Add disk-file validation in heartbeat collection to prevent reporting
phantom volumes that exist in memory but are deleted from disk. This
unblocks re-replication when files are unlinked while the volume server
holds them open via file descriptors.
Cache disk checks per-volume with 30-second TTL to avoid syscall overhead.
Implement in both Go and Rust volume servers.
* volume: make last_disk_check_ns field public for heartbeat access
* volume: only check for phantom volumes when size > 0
Skip phantom volume detection for zero-size volumes (e.g., test volumes).
Phantom volumes only occur when disk files are deleted while the process
holds them open via FDs - which requires the volume to have had actual data.
Test volumes with zero size should not trigger disk file existence checks.
* volume: only check for phantom volumes when size > 0
Skip phantom volume detection for zero-size volumes (e.g., test volumes).
Phantom volumes only occur when disk files are deleted while the process
holds them open via FDs - which requires the volume to have had actual data.
Test volumes with zero size should not trigger disk file existence checks.
* volume: only check for phantom volumes if file_count > 0
Use file_count as the indicator for whether a volume held actual data,
rather than volume size. Phantom volumes only occur when a volume that
had files is deleted while the process holds open file descriptors.
Test volumes with no file count won't trigger the phantom detection check.
* volume: stat the .dat with its extension when detecting phantom volumes
DataFileName()/IndexFileName() return the extensionless base path, so os.Stat
saw every volume's files as missing and dropped it from the heartbeat, leaving
the master with no locations and breaking deletes/lookups. Stat FileName(".dat")
instead, skip remote-tiered volumes whose .dat lives in cloud storage, and
re-check a missing file every heartbeat rather than caching the negative.
* filer: skip COLLATE "C" list fallback on CockroachDB
CockroachDB string comparison is already byte-ordered, so wrapping the
list queries in COLLATE "C" can never change result order. It reports
datcollate=en_US.utf8 regardless of how the database was created, so the
collation check always misfires and forces the fallback. On 22.1 and
older COLLATE "C" is rejected as an invalid locale, turning every filer
list query into a hard failure. Detect the backend via version() and
keep the default ordering.
* filer: test CockroachDB collation detection
Cover the CockroachDB skip path and the locale-aware Postgres force path
with go-sqlmock.
* fix(mount): run entry invalidations off the meta-cache apply loop
The apply loop ran invalidateFunc inline, which acquires the open file
handle's lock in fhLockTable. Meanwhile flushMetadataToFiler holds that
same fh lock and then waits on the apply loop (applyLocalMetadataEvent).
When both target the same open file concurrently, the loop blocks on the
fh lock while the lock holder blocks on the loop: an ABBA deadlock that
backs up every later readdir/flush and hangs the mount.
Fix: dispatch entry invalidations to a dedicated FIFO worker goroutine so
the apply loop never blocks on locks held by goroutines waiting on it.
Adds a regression test reproducing the interleaving.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* perf(mount): update invalidate counter once per batch
Run the batch's invalidateFunc calls without re-taking invalidateMu per
item, then bump invalidateProcessed and broadcast once after the loop.
WaitForEntryInvalidations only needs the count to reach its target and a
batch always completes together, so the per-item lock + broadcast was
wasted work.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* mount: extract the invalidate worker into util.AsyncBatchWorker
The apply loop's off-thread entry-invalidation queue was a one-off mutex +
cond + slice + counters living inside MetaCache. Pull it out as a generic
unbounded FIFO worker so the deadlock-avoidance contract (never block the
producer, drain on shutdown, wait-for-quiesce) lives in one place.
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
GetObjectStoreUserDetails only returned identity.PolicyNames (attached
managed policies) and omitted per-user inline policies. Inline policies are
stored separately from the identity record and are authoritative at S3
enforcement time (they take precedence over the legacy Actions list), so an
operator could not see what actually governed a user's access via the admin
API/UI.
Include inline policy names (via credentialManager.ListUserInlinePolicies) in
the returned PolicyNames. Adds a unit test using the memory credential store.
* mount: cache supplementary group IDs to improve non-root access performance
* mount: clear supplementary group cache between tests and add cache verification test
* mount: add docstrings and benchmarks for supplementary group cache
* mount: add performance test demonstrating cache effectiveness
* mount: add TTL-based cache expiry for supplementary group IDs (5-minute refresh)
* s3: add streaming reader interface for remote storage
Add RemoteStorageStreamReader optional interface to support efficient
streaming of large remote objects without buffering entire file in memory.
This enables future stream-through caching where data can be served to
clients while simultaneously writing to volume servers.
Implement ReadFileAsStream() for S3, GCS, and Azure backends using their
native streaming APIs. This provides the foundation for improving TTFB
on large remote file access by serving data directly from remote storage
while background cache operation populates local chunks.
The streaming interface allows remote storage backends to return io.ReadCloser,
enabling efficient memory usage for multi-GB objects compared to the
current ReadFile() approach which buffers entire ranges in memory.
* s3: adaptive timeout for remote object caching to improve TTFB
Use size-aware cache polling timeout to balance cache-hit rate against
time-to-first-byte:
- Small files (<50MB): 10s timeout - more likely to complete caching
before timeout, improving subsequent request performance
- Medium files (50-500MB): 5s timeout - default balance
- Large files (>500MB): 2s timeout - fail-fast to improve initial TTFB
for very large downloads
This reduces waiting time for large remote files while maintaining
high cache-hit rate for smaller files that cache quickly.
* s3: address code review feedback for stream-through cache
- Move startBackgroundRemoteCache call after policy recheck to avoid
cache side effects for denied requests (authorization first)
- Make startBackgroundRemoteCache version-aware by accepting versionId
parameter and using buildVersionedRemoteObjectPath
- Add timeout (5 minutes) to background cache context to prevent
goroutine pile-up if RPC stalls under load
- Update cacheRemoteObjectForStreamingWithShortTimeout to return both
entry and error, allowing callers to distinguish transient errors
(timeout/cancellation) from permanent errors (not found, denied)
- Update streamFromVolumeServers to handle permanent cache errors with
appropriate HTTP status codes (404 for not found, 503 for transient)
* helm: reject emptyDir for volume idx
An ephemeral index on a separate volume is wiped on every pod restart
while the .dat/.vif persist on the data PVCs. The volume server then
finds data with no matching .idx and exits via glog.Fatalf, putting the
pod into CrashLoopBackOff with no automatic recovery.
emptyDir is never the right choice for idx: if the data is persistent it
is a durability mismatch, and if the data is also ephemeral the default
(idx co-located with the data) already covers it. Fail the render with a
clear message pointing at the default or a persistent volume instead, and
drop emptyDir from the documented idx options.
* helm: rebuild a missing volume idx on restart
With emptyDir rejected, a separate idx volume is always persistent
(hostPath/PVC/existingClaim) -- but it can still lose its .idx out of
band (e.g. a node-local PVC reprovisioned on reschedule, or a pre-9944
compaction crash that left a .dat without its matching .idx). The
seaweedfs-vol-move-idx init container already moves idx files next to the
data into the index dir; have it first regenerate, via weed fix, any .idx
absent from both the data dir and the index dir, then move it into place.
The rebuild only runs when an idx is genuinely missing, so a healthy
index adds no startup cost.
* volume: validate remote S3 endpoints in FetchAndWriteNeedle (Rust)
Port the Go volume server's SSRF guard to the Rust volume server. The
gRPC FetchAndWriteNeedle reads from a caller-supplied S3 endpoint, so an
unguarded server can be pointed at loopback / link-local / RFC1918 /
CGNAT / cloud-metadata hosts to read internal services. Resolve and
reject those endpoints unless -volume.allowUntrustedRemoteEndpoints is
set (default off), mirroring weed/server/volume_grpc_remote.go.
Connect-time re-validation against DNS rebinding (Go's guardedDialer) is
not yet ported: the aws-sdk-s3 client builds its own connector, so the
up-front resolve-and-check leaves a narrow TOCTOU window. Left as a
follow-up.
* volume: harden remote endpoint guard (IPv4-mapped IPv6, all S3 types)
Address SSRF review feedback:
- Normalize IPv4-mapped IPv6 (::ffff:a.b.c.d) to IPv4 before the deny
checks, so ::ffff:127.0.0.1 / ::ffff:169.254.169.254 no longer slip
past the IPv4 rules.
- Validate the endpoint for every S3-compatible backend, not just type
"s3"; wasabi/backblaze/aliyun/... all dial a caller-supplied endpoint
through the same client. Skip validation when the endpoint is empty
(the provider default, e.g. real AWS S3, which cannot reach internal
hosts).
* volume: set allow_untrusted_remote_endpoints in integration-test state
The tests/http_integration.rs VolumeServerState literal was missed, which
broke cargo test compilation (it builds the integration tests, unlike the
cargo test --lib used locally).
EC bitrot protection is now a fixed default: always on at 16 MiB block
granularity. These volume-server flags exposed needless configurability;
the package defaults in erasure_coding (BitrotProtectionEnabled,
BitrotBlockSize) are retained and still drive sidecar generation. Drop the
now-unused erasure_coding import.
TopicExists can return a transient false-negative for a topic that is in
fact present (a broker/filer blip under load, or a just-created topic whose
existence cache is still stale). The metadata and produce handlers then tried
to auto-create, hit "topic already exists", treated that as a failure, and
dropped the topic from the Metadata response - so the client saw a spurious
UNKNOWN_TOPIC_OR_PARTITION right after the topic was created.
Return a sentinel ErrTopicAlreadyExists from the create paths and add
ensureTopicExists, which treats it as confirmation the topic exists. It also
folds in the repeated TopicExists -> invalidate -> recheck -> create logic
shared by every metadata handler (v0-v8) and both produce paths. v2+ produce
now auto-creates too, matching the auto.create.topics.enable=true behavior the
rest of the gateway already simulates.
Add path filters to workflows that fired on every PR/push regardless
of the diff: CodeQL, go build, the e2e/EC/vacuum/TLS/plugin-worker
integration suites, the Kafka and Postgres gateways, the S3 suites
(Ceph s3tests, s3-go, s3-tables, proxy-signature, https, example,
filer-group), TUS, and the dev binary/container builds. Each scopes
to its subsystem under weed/, its test dir, go.mod/go.sum, and the
workflow file, so docs-, helm-, terraform-, rust- or java-only
changes no longer trigger a full compile-and-test fleet.
* mount: apply cached remote entry without blocking the read
Reading an uncached remote-mounted file hung forever. The read holds the
file-handle shared lock across the on-demand download, then synchronously
waits on the metadata apply loop to apply the cached entry. The filer's
update event for that same object reaches the apply loop first and runs
invalidateFunc, which wants the file-handle exclusive lock — held in shared
mode by the still-running read. The loop blocks on the read; the read blocks
on the loop.
Enqueue the apply without waiting so the read never blocks on the apply loop
while holding the lock. The handle is already updated via SetEntry, and the
filer subscription delivers the same event regardless.
* mount: regression test for uncached remote read deadlock
Drives the real Read path through downloadRemoteEntry with a stub filer that
broadcasts the matching invalidate event before returning, reproducing the
lock-ordering deadlock. Fails (times out) without the fix.
* s3api: add optional request interceptor to circuit breaker
Add an optional Interceptor func(next http.HandlerFunc, action string) http.HandlerFunc
field on CircuitBreaker, applied at the very top of Limit() -- before upload
concurrency limiting and before the 'if !cb.Enabled' early return -- so it runs
for every route regardless of breaker state.
It is nil by default (no behavior change). An interceptor may reject a request
(write its own response and skip next) or wrap next to observe/shape it. This
provides a single per-request extension point at the existing per-route
chokepoint (cb.Limit already wraps nearly every S3 route), useful for tracing,
auditing, or request rate limiting without touching the route table.
* s3api: evaluate circuit breaker interceptor per request
Move the Interceptor nil-check into the returned handler so it is consulted
per request instead of captured at registration time. This:
- lets the interceptor be installed after registerRouter runs (handlers are
built during construction, before request-time dependencies exist), and
- avoids dereferencing a nil CircuitBreaker at registration time, which
panicked tests that register routes on a server with a nil cb
(e.g. TestRouting_STSWithQueryParams).
Adds a regression test for installing the interceptor after Limit() returns.
* fix(shell): return fs.verify topology errors
Problem: fs.verify can silently ignore master topology lookup failures before verifying files.
Root cause: commandFsVerify.Do returned parseErr after collectVolumeIds failed, but parseErr is nil once path parsing succeeds.
Fix: Return the actual collectVolumeIds error so VolumeList and master client failures stop the command.
Co-authored-by: Codex <noreply@openai.com>
* remove the tests
---------
Co-authored-by: Codex <noreply@openai.com>
isLocalOnlyEntry resolved the pinned-child check through inodeToPath. A kernel
Forget drops the path→inode mapping once the lookup count reaches zero, but an
async writeback flush — and the file handle, still in fhMap during the drain —
is keyed by inode and outlives that mapping. Between Release dispatching the
async flush and the flush reaching the filer, a Forget could unpin an in-flight
create, so a concurrent directory rebuild would wipe it and the file would
ENOENT until the flush lands and the cache refreshes.
Key the check off the inode the store entry already carries (createFile stamps
it into the placeholder), so the pin no longer depends on a mapping Forget can
remove.
* s3: bound streaming remote-cache wait so large cold GetObject returns 503, not a hang
A remote-only object whose download outlasts the 30s dedup attempt fell through
to cacheRemoteObjectForStreaming, which waited on the raw request context with no
bound. For multi-GB blobs the client read timeout fires first, so the request was
canceled and surfaced as InternalError rather than the 503 + Retry-After the
handler already emits. The filer keeps caching on a detached context, so the
retry would have streamed from the cached chunks.
Bound the wait under common client read timeouts: the 503 fires while the client
is still connected, and a retry picks up the finished cache.
* s3: make the streaming remote-cache timeout atomic
The bound is a package-level var so tests can shorten it. Hold it as an
atomic int64 so a test that stores a short value can never race the request
path that loads it.
* s3: assert the streaming-cache timeout test waits on the bound
The upper-bound-only check would also pass if the RPC returned immediately on a
setup error. Add a lower bound so the test fails unless the bounded wait fired.
wfs.Create defers the filer create to Flush and inserts a local-only
placeholder into the metaCache (dirtyMetadata=true), so a just-created file
exists locally before the filer has it. When the parent directory falls out of
cache (hot-dir read-through, idle evict) and is rebuilt, EnsureVisited wipes the
store and refills from a filer listing that does not yet include the un-flushed
create, then markCachedFn publishes the directory authoritatively cached without
it. lookupEntry then returns an authoritative ENOENT and ReadDir returns nothing
— the file disappears from the mount although the client created it. Under
concurrent read+write churn on one directory this is the ConcurrentReadWrite
flake.
Preserve children the mount flags as local-only (open dirty handle or pending
async flush — the signal lookupEntry already trusts) across the rebuild's wipe
instead of blind-deleting them. Unpinned stale children are still dropped so a
rebuild cannot resurrect a deleted entry.
The s3 and rclone tiered-storage backends were registered via blank imports
in weed/storage (volume_tier.go and volume_info/volume_info.go). That forced
every library consumer of weed/storage -- weed/shell, and through it external
tools -- to link aws-sdk-go and, under the rclone build tag, the full rclone
backend set and its cloud-storage SDKs, even though those consumers never tier
volumes.
Move the registrations into a new weed/storage/backend/all aggregator and
blank-import it once from weed/command, the binary's composition root. The weed
binary still registers both backends; weed/storage and its library consumers no
longer pull the backend SDKs into their dependency graph.
* SECURITY.md: require working repro and trust-boundary impact
Funnel reports through GitHub private vulnerability reporting, require a
reproduction against a supported version, and spell out the trust model so
internal-cluster exposure and example-config issues are out of scope.
Unvalidated scanner/AI output is handled as hardening, not as an advisory.
CVEs minted by third parties outside this process may be disputed.
* SECURITY.md: drop email channel, GitHub private reporting only
* mount: tolerance-window write pattern detection for concurrent writeback
WriterPattern decides whether each dirty chunk is buffered in RAM
(NewMemChunk) or spilled to an on-disk swap file (NewSwapFileChunk), so a
sequential stream misclassified as random is pushed through disk-backed
swap.
The old detector compared each write's start to the previous write's
exact stop offset (atomic.Swap of lastWriteStopOffset, then
lastOffset == offset). That is brittle under concurrent FUSE writeback:
MonitorWriteAt runs before the per-handle write lock, so parallel Write
upcalls interleave the swap, and writeback flushes dirty pages slightly
out of offset order. A genuinely sequential stream then repeatedly reads
as random and spills to swap.
Replace the exact match with the same frontier + tolerance approach used
on the read side: track a never-regressing max frontier (offset+size) via
a CAS loop and treat a write whose start is within SeqTolerance (8 MiB) of
that frontier as sequential. The existing +/-ModeChangeLimit hysteresis is
kept, so a single outlier write can't flip the mode.
Adds page_writer_pattern_test.go covering sequentiality, hysteresis,
reorder tolerance, the inclusive tolerance boundary, frontier
non-regression (the CAS invariant), and recovery back to sequential mode.
* mount: read write frontier inside the CAS loop
Capture the frontier from the CAS loop's own load rather than a separate
up-front snapshot, so the sequentiality diff is judged against the freshest
pre-image even if a concurrent writeback upcall advances the frontier while
we loop. Also drops the now-redundant load. Behavior is unchanged for the
single-threaded tests; addresses review feedback on #9984.
* filer: tolerance-window read pattern detection for concurrent readahead
ReaderPattern detected sequential access via strict contiguity (lastReadStopOffset
== offset). Under concurrent/reordered ReadAt (parallel readahead, which ReadAt
already supports via RLock + atomics), that exact match frequently misses even for
a genuinely sequential stream, drifting toward random mode and disabling prefetch.
Track a read frontier (max offset+size, advanced with a lock-free CAS loop) and
treat a read as sequential when its start is within SeqTolerance (8 MiB) of the
frontier. The window absorbs reordered/concurrent readahead while still rejecting
far random jumps; the existing ModeChangeLimit hysteresis is unchanged. API
(NewReaderPattern/MonitorReadAt/IsRandomMode) is unchanged, so reader_at is
unaffected. Adds reader_pattern_test.go.
* filer: read the read frontier inside the CAS loop
Capture the frontier from the CAS loop's own load rather than a separate
up-front snapshot, so the sequentiality diff is judged against the freshest
pre-image even if a concurrent readahead advances the frontier while we loop.
Also drops the now-redundant load. Mirrors the same fix on the write-side
ReaderPattern twin (review feedback on the companion PR).
* filer: add frontier/boundary/recovery guard tests for ReaderPattern
Mirror the regression guards added to the write-side WriterPattern: assert
the max-frontier never regresses on a backward read (the CAS invariant), pin
both sides of the inclusive SeqTolerance boundary, and verify sustained near
reads recover sequential mode out of the negative floor. Each guards an
invariant the original four tests left uncovered.
* test: add FUSE database load/durability/perf benchmark
Runs MySQL (InnoDB) and SQLite with ~1GB datadirs on a SeaweedFS FUSE
mount. Two parts:
- durability: normal shutdown, kill -9, and crash-during-write all keep
every fsync-committed row (verified by integrity check + row count +
contiguous prefix + per-row CRC).
- performance: FUSE vs the same local disk. fsync/commit latency is the
dominant cost (~0.13ms -> ~1.18ms), so small transactions run ~9-12x
slower while bulk loads and warm reads stay close.
Harness is path-independent (runtime under $SEAWEED_BENCH_WORK) and only
touches its own processes on non-default ports.
* test/benchmark/fuse_db: portable to Linux + crash-safe progress
- export MYSQL_BIN; mysql_bench.py falls back to PATH when unset
- unmount via fusermount/fusermount3 (non-root Linux), then umount/diskutil
- atomic progress write (tmp+fsync+rename); treat empty progress file as 0
- reuse a single PRNG in the perf probe so RNG init doesn't skew timings
* test/benchmark/fuse_db: validate inputs, add subprocess timeout
- mysql_bench.py: 1800s timeout on mysql CLI calls; reject db names that
aren't plain identifiers (interpolated into SQL)
- sqlite_gen.py / sqlite_verify.py: allowlist journal/synchronous modes and
the verify mode so a typo can't silently weaken durability or relax checks
- run_mysql.sh: durable atomic progress write (tmp+fsync+rename), matching
sqlite_gen.py; quote $LB in both crash-test verify calls
security.toml: document WEED_ env override for the jwt signing keys
These keys are HMAC secrets; spell out the env-var mapping so they can be
injected from a secret store instead of living in the config file.
* fix(command): preserve fuse option after writers
Problem: FUSE mount option parsing skipped the option immediately following concurrentWriters, so values such as concurrentReaders could be silently ignored.
Root cause: runFuse incremented the options loop index inside the concurrentWriters case in addition to the loop increment.
Co-authored-by: Codex <noreply@openai.com>
* test: save and restore mountOptions pointers, not their values
The fields are reassigned to fresh heap variables during runFuse, so
dereferencing to back up/restore mutated throwaways instead of the
flag-bound originals and could nil-panic on unset fields.
---------
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* admin: add connected mount clients page and dashboard section
The filer is the authority on who is subscribed to its metadata stream
(FUSE/VFS mounts, S3, peer filers, ...), but its in-memory listener
registry only tracked clientId->epoch and was not exposed.
- Enrich the filer subscriber registry with name/type/address/path/
connected-time, populated in addClient and cleared in deleteClient so
it reflects currently-connected clients only.
- Add a ListMetadataSubscribers filer gRPC (optional client-type filter).
- Admin server fans out to every filer, filters to mount types
("mount" Go weed mount, "sw-vfs" Rust VFS), and renders a new
Cluster > Mount Clients page plus a Mount Clients dashboard section.
Read-only; no behavior change to the subscribe hot path.
* admin: address review — parallelize filer fan-out, guard nil map, robust CSV
- GetMountClients now queries filers concurrently, each under a 5s
timeout, so a slow/unreachable filer can't stall the admin dashboard.
- Defensively initialize fs.subscribers before first write.
- Mount Clients CSV export uses a Blob with quote-escaping instead of a
data: URI, so special characters in paths export correctly.
* filer: keep metadata-subscription send gauge fresh on idle heartbeat
last_send_timestamp_of_subscribe only advanced when a real matching
metadata event was streamed to a subscriber. On a quiet path an idle but
perfectly healthy subscriber therefore looked increasingly stale, and the
dashboard panel rendered a large, misleading 'lag'.
An idle heartbeat is a send too, so advance the gauge when one is emitted.
Subscribers that opt into idle heartbeats (filer.sync) now report true
freshness; the rest still show time since the last real event.
Rename the dashboard panel 'Metadata Subscription Lag' ->
'Time Since Last Subscription Send' and clarify its description to match.
* filer: guard nil option when advancing heartbeat gauge
maybeSendIdleHeartbeat is unit-tested with a bare &FilerServer{} (nil
option), so dereferencing fs.option.Host for the sourceFiler label
panicked. Guard it: production always has option set; the test now gets
an empty sourceFiler label instead of a nil-pointer panic.
* s3: register account-less identities' synthesized account in the lookup
#9962 gave each account-less identity a distinct account id derived from
its name (instead of collapsing into admin), but never registered that
account in the id->account map. GetAccountNameById then returned empty
for such ids, so ACL grantee validation rejected canonical grants to the
caller's own account with InvalidRequest, and bucket/object owner display
was dropped as 'owner is invalid'.
This broke a canned PutObjectAcl by an account-less identity (e.g.
TestVersionedObjectAcl with the default 'some_admin_user' identity):
ValidateAndTransferGrants -> GetAccountNameById -> 'account id is not
exists' -> 400 InvalidRequest.
Register the synthesized account at config load so its id resolves to a
display name. Add a regression test.
* s3: reuse explicitly-configured account for account-less identity
Address review: if an account with the same id as an account-less
identity's synthesized account is explicitly configured (custom display
name/email), reuse it instead of the synthesized one. Add a test.
* metrics: add per-bucket S3 panels and volume slot utilization to dashboard
The S3 Gateway/Buckets rows sliced requests only by type, never by bucket,
though SeaweedFS_s3_request_total and the request/TTFB histograms all carry a
bucket label. Add a Bucket template variable and four per-bucket panels to the
S3 Buckets row (request rate, response codes, request p95, TTFB p95), plus a
Volume Slots Utilization panel (volumes/max_volumes) to the Volume Servers row.
* metrics: scope bucket variable to cluster and guard slot utilization divide-by-zero
Source the Bucket variable from SeaweedFS_s3_bucket_size_bytes (a gauge emitted
for every bucket, including idle ones) scoped to the selected cluster, so the
dropdown lists all buckets in the cluster rather than only those that received
requests. Wrap the volume slot utilization denominator in clamp_min(..., 1) to
avoid +Inf/NaN when max_volumes is briefly zero or absent.
* metrics: guard time()-based panels against unset (zero) gauges
Several dashboard panels compute "time() - <gauge>" (uptime, time-since-
last-scrub, lifecycle cursor lag, last daily walk). When the underlying
gauge is unset it reports 0, so the panel rendered ~56 years (time since
the Unix epoch). This is the common case for "Volume Server Uptime": the
Rust volume server doesn't set SeaweedFS_volumeServer_start_time_seconds,
and Go components expose it registered-but-zero.
Guard each such expression with "> 0" so unset/zero series drop out (the
panel shows no data) instead of rendering a nonsensical epoch value.
Affected panels: Master Uptime, Volume Server Uptime, Time Since Last
Scrub, Lifecycle Cursor Lag, Time Since Last Daily Walk.
* metrics: guard Filer Sync Offset Lag and Metadata Subscription Lag panels too
Extend the > 0 guard to the two remaining time()-<gauge> panels that
share the same unset/zero failure mode (filerSync sync offset and the
metadata subscribe last-send timestamp), so they don't render ~56-year
lag when the gauge is absent.
admin: fold dashboard sparklines into the existing cards
The trend sparklines added in #9957 lived in a separate "Cluster Trends"
row that duplicated the existing summary cards (Volumes, Files, Disk Used,
EC Shards). Remove that row and instead render each sparkline inside the
matching summary card, so every headline number shows its recent trend
without duplication. The two maintenance metrics that have no existing
card — Active Tasks and Workers — now fill the previously-empty columns of
the EC row (also with sparklines).
DashboardTrends changes from a Cards slice to named per-card sparkline
SVGs (+ current values for the two maintenance cards). Drops the now-unused
trendBytes helper (disk size keeps using the existing formatBytes).
* s3tables: resolve account-less identities to a distinct principal
Static identities with no account block default to the shared admin
account, so getAccountID returned "admin" for every such user and the
permission checks treated them all as the admin principal. Only keep the
admin account when the identity actually carries an admin action;
otherwise fall back to the unique identity name.
* s3tables: limit the open-by-default fallback to anonymous access
The legacy permission path allowed any request that no policy explicitly
denied whenever default-allow was on, which is the zero-config default.
That let an authenticated identity without table permissions reach table
resources owned by others. Restrict the fallback to requests with no
identity or the anonymous identity; authenticated callers must pass an
explicit action or policy check. Zero-config and anonymous access are
unchanged.
* s3tables: drop the no-op ListTableBuckets account gate
The top-level check passed the principal as its own owner, so it always
allowed. Per-bucket filtering in the loop is the real authority; remove
the dead gate and the now-unused locals.
* s3tables: derive the Iceberg catalog's default-allow from auth state
The Iceberg catalog reuses the S3 Tables Manager, which hardcoded
default-allow on. Authenticated callers were enforced only because the
identity struct happens to propagate into the handler; if it were ever
dropped, a secured catalog would fall open. Mirror the S3 port and set
the Manager's default-allow from the authenticator, so an authenticated
caller is enforced regardless. Shell and admin keep their own trusted
Manager. Regression test covers the struct, name-only, and admin paths.
* s3tables: drop redundant ACTION_ADMIN string conversion
ACTION_ADMIN is an untyped string constant, so the conversion is a no-op.
* s3tables: enforce name-only authenticated callers, add trusted bypass
defaultAllowFor treated a request with no identity object as anonymous,
but the Manager path forwards only the identity name (not the struct).
A name-only authenticated caller could therefore be misclassified as
anonymous and allowed under the open default. Treat a server-set identity
name as authenticated too, and add an explicit trusted flag for the local
shell/admin tooling that legitimately bypasses authorization.
* s3tables: trim verbose comments
* admin: native at-a-glance trend sparklines on the dashboard
Add a "Cluster Trends" row to the admin Dashboard with inline-SVG
sparklines for volumes, EC shards, disk used, files, active maintenance
tasks, and workers.
The data comes entirely from what the admin already holds — the cached
cluster topology and the in-process maintenance queue — sampled into a
small bounded ring buffer on the existing maintenance-metrics ticker
(~15 min of history). No Prometheus/Grafana dependency, no JS chart
library, no extra goroutine: the sparklines are self-contained SVG
rendered server-side via templ.
This gives basic trend visibility out of the box for clusters that don't
run Prometheus, and a quick glance next to the cluster controls; Grafana
remains the place for deep/historical dashboards.
* admin: cap trendBytes unit index to avoid out-of-bounds panic
A value >= 1 ZiB would push exp past the end of the units string and
panic on units[exp]; cap exp at the last unit (EiB).
* s3: give STS sessions a distinct owner account, not admin
STS sessions were built with Account: &AccountAdmin, so every assumed-role
session shared the admin account for ownership and ACL checks. Use the
assumed-role user as the account id instead, matching the JWT auth path.
Session permissions are unchanged: they come from the session policies,
and admin is granted only through Actions.
* s3: resolve STS session identity to the OIDC subject
Use sessionInfo.Subject (falling back to the assumed-role user when
absent) for the session identity name and account id, so the SigV4 and
JWT auth paths resolve the same session to the same identity instead of
diverging on AssumedRoleUser vs Subject.
* s3: trim verbose comments
* s3: stop collapsing account-less identities into the admin account
Identities configured without an account block all defaulted to the
shared admin account, so distinct users got the same owner id and
ownership checks could not tell them apart. checkAccessByOwnership also
treated that id as an admin bypass, so any account-less caller passed
ownership for any bucket. Give such identities a distinct account id from
their name, and decide the ownership admin bypass by Admin capability
rather than by the account id. isUserAdmin is now nil-safe.
* s3: use the context identity in isUserAdmin before re-authenticating
The Auth middleware already verifies and stores the identity in the
request context. Read it there first so the ownership/admin checks don't
re-run signature verification, which is redundant and fails once the
request body has been consumed.
* s3: nil-guard the context identity in isUserAdmin
A non-nil interface wrapping a typed-nil *Identity passes the type
assertion; guard against it before calling isAdmin().
* s3: trim verbose comments
The bundled dashboard (other/metrics/grafana_seaweedfs.json) covered only
18 of the 84 metrics weed/stats exposes and was a legacy Grafana 8 export
(graph panels, schemaVersion 30). Rebuild it as a modern dashboard
(timeseries panels, schemaVersion 39) with 100% metric coverage, targeting
the direct-scrape model used by Prometheus / seaweed-up / Kubernetes.
- Full coverage of every weed/stats metric: master, volume server, filer,
filer store/sync, s3, s3 buckets, s3 lifecycle, admin/maintenance, build,
wdclient, upload errors, plus Go runtime/process per component.
- Organized into collapsible rows with an always-on Overview.
- Scrape label model: group by `instance`; generic go_*/process_* panels
use `job=~"seaweedfs-.*"` to separate components; an optional `cluster`
template variable (from SeaweedFS_build_info, defaults to All) supports
multi-cluster setups and is transparent when no cluster label is present.
- Same uid (nh02dOVnz) and title so it upgrades in place; drops the dead
"AWS monthly cost" panel.
This is also the single source of truth bundled by seaweed-up's
`cluster dashboard install`.
* refactor(ec_balance): make the balance planner per-volume ratio-capable
Thread a per-volume EC ratio through the balance planner: Plan resolves each
volume's data/parity from a new Options.VolumeRatio (falling back to the
collection Ratio, then the build default, when it reports 0), and keys the
global phase's ratio maps by volume instead of collection. The shell and
worker balance paths build the per-volume lookup from each shard's heartbeat
via the new ecbalancer.VolumeShardRatio.
In OSS this is behavior-preserving: VolumeShardRatio returns 0 because the
per-volume data_shards/parity_shards heartbeat fields are an enterprise
feature, so every volume falls back to the collection ratio -- the existing
standard-scheme behavior. The refactor keeps the shared planner in sync with
the enterprise fork, which overrides VolumeShardRatio to classify and spread
a mixed-ratio collection by each volume's own data/parity split.
* perf(ec_balance): hoist the collection ratio out of the per-volume loop
The collection ratio is constant for every volume in a collection, so
resolve it once per collection instead of per volume; a custom Ratio func
may do map lookups or locking. Addresses a review comment.
* fix(ec): recover EC shards with the volume's own ratio, not the build default
recoverOneRemoteEcShardInterval rebuilt a missing shard with a hardcoded
10+4 Reed-Solomon matrix (and counted sufficiency / iterated shards
against the 10+4 constants). For a custom-ratio volume (e.g. 9+3) that
reconstructs with the wrong matrix and corrupts the recovered bytes, and
cachedLookupEcShardLocations could wrongly reject a degraded but
recoverable custom-ratio read. Use the volume's own ECContext (loaded
from its .vif) for the encoder, the shard-iteration bound, and the
data-shard sufficiency checks. In OSS the ratio is always 10+4 so this is
a no-op; it brings the Go volume server in line with the Rust one, which
already reconstructs with the volume's ratio.
* fix(ec): close data races in the EC read-recovery path
Address review: the freshness check in cachedLookupEcShardLocations read
ecVolume.ShardLocations / ShardLocationsRefreshTime without the lock while
recover goroutines mutate them via forgetShardId -- snapshot both under
ShardLocationsLock.RLock(). The recover goroutines also wrote the shared
is_deleted return concurrently -- collect it via an atomic and fold it in
after they join. Also size availableShards/missingShards by the volume's
ECContext ratio rather than the 10+4 constants.
* fix(ec): remove the shared EC index only when no shard remains node-wide
deleteEcShardIdsForEachLocation removed the shared .ecx/.ecj/.vif index
as soon as a single disk's shard count hit 0, even when a sibling disk
of the same node still held shards of the volume (split-disk reconciled
layout) -- orphaning those shards without their index. Split the
non-teardown delete into two passes: delete the requested shard files
(and now-orphaned per-disk bitrot sidecars) on every disk, then remove
the shared index only once no shard of the volume remains on ANY disk.
This brings the Go volume server in line with the Rust one, which already
gates the index removal on a node-wide check.
* refactor(ec): reuse checkEcVolumeStatus across the two delete passes
Address review: cache hasEcxFile/hasIdxFile from the node-wide count pass
and pass them to removeEcSharedIndexFiles instead of re-listing each
location's directory.
* fix(ec): clean an orphaned EC .vif even when its .ecx is already gone
Address review: removeEcSharedIndexFiles returned early on !hasEcxFile,
so a node-wide teardown left a stale EC .vif behind when its .ecx was
already removed. Decouple the .vif removal (gated on !hasIdxFile) from
.ecx presence so the generation metadata doesn't leak once no shard
remains node-wide.
* fix(storage): delete and unmount every copy of a duplicate volume id
NewStore has no cross-disk duplicate guard (unlike the Rust volume
server, which refuses to start in that state), so a stale twin of a
volume id can mount on a second disk after a disk repair. DeleteVolume
and UnmountVolume returned after the first matching disk, leaving the
twin to survive and re-register as the volume's content. Walk every disk
and act on all copies, emitting one heartbeat delta per copy.
* fix(storage): surface partial delete/unmount failures across duplicate copies
Address review: if removing one copy of a duplicate volume id fails with a
real error (disk IO, permissions), the loop logged it and could still
return success once another copy was removed -- leaving the stale copy to
re-register, the exact divergence this guards against. DeleteVolume and
UnmountVolume now accumulate such errors and return them (still attempting
every disk), so a copy left behind is never reported as success. Add a
DeleteVolume duplicate-copies regression test.
* feat(ec): add encode_ts_ns to the EC task params, shard-unmount, and shard-delete RPCs
The generation fence for stale EC-worker cleanup needs the encode
generation on three messages: ErasureCodingTaskParams (admin issues it),
VolumeEcShardsUnmountRequest, and VolumeEcShardsDeleteRequest (the worker
carries it to the volume server). Additive fields only; 0 preserves the
existing unfenced behavior. Mirror the two volume-server fields in the
Rust volume server's proto copy.
* feat(ec): issue the EC encode generation from the admin and carry it on the worker
Stamp each EC proposal's encode_ts_ns from the admin's per-cycle
DetectionSequence (a single-clock value) so generations are globally
ordered even though detection runs on a rotating worker. The worker
writes that generation into the distributed .vif and passes it on its
shard unmount/delete RPCs; it falls back to a local timestamp for the
.vif only on the unfenced legacy/shell path (keeping the read guard on).
* fix(ec): fence the stale-worker EC shard unmount and teardown by generation
A reaped-but-still-running EC worker's cleanupStaleEcShards issued a
generation-blind unmount + full teardown that could unmount and then
overwrite a newer run's live shards on a shared node. Both RPCs now
carry the encode generation: the volume server unmounts/deletes a disk
only when its .vif generation is strictly older than the request, and
preserves a same-or-newer generation, a generation-0 (recovered or
pre-upgrade) volume, and an unreadable .vif. Unload is per-disk, never
node-wide. Request generation 0 keeps the blanket teardown for the shell
pre-encode cleanup and pre-upgrade callers. Mirrored in the Rust volume
server.
* test(ec): cover the generation-fenced teardown and unmount
End-to-end volume-server tests: a fenced FullTeardown wipes a strictly-
older generation, preserves a newer one, preserves a generation-0 volume,
and blanket-wipes on request generation 0; the gen-aware unmount preserves
a same-or-newer mounted generation; and the .vif generation reader handles
present/absent/no-config cases.
* test(ec): pin the fenced .vif==teardown generation and the unreadable-.vif preserve
A fenced run must stamp the admin generation verbatim into the .vif so it
matches the generation sent on the teardown RPCs; add a regression test
that sets the task generation and asserts the .vif carries it exactly.
Also cover the present-but-unparseable .vif case (reads as generation 0,
preserved) and correct the readEcGenerationTsNs docstring accordingly.
* fix(ec): surface EC full-teardown filesystem errors in the Rust volume server
remove_ec_volume_files(_full_teardown) discarded every fs::remove_file
error, so a teardown that failed on permissions or a full disk still
returned full_teardown_done=true and left stale artifacts to collide with
the next encode. Return io::Result, ignore NotFound, propagate the first
real error, and have the teardown RPC surface it -- matching the Go
contract. The best-effort reconcile/load-cleanup callers keep ignoring it.
* refactor(ec): reuse the EC volume lookup on unmount and short-circuit the gen read
Address review: the Rust unmount fence reuses the ec_vol it already
fetched instead of a second find_ec_volume; the Go .vif generation reader
breaks out of the data/idx loop early when the two dirs are the same.
* s3: preserve checksums for copied multipart parts
* s3: return checksums from multipart copy
* s3: pin the upload's checksum algorithm on copy-part re-stream
* s3: note why UploadPartCopy uses the re-stream slow path
* s3: explain the TLS proxy in the multipart copy checksum test
* s3: cover nil and unknown-algorithm edge cases in copy checksum tests
* s3: cover all checksum algorithms in the multipart copy test
* s3: run all checksum integration tests, not just presigned
* feat(ec): carry the encode generation through the topology heartbeat
Add encode_ts_ns (field 14) to VolumeEcShardInformationMessage and
populate it from each EC volume's .vif identity. The volume server emits
it on the full and incremental heartbeats; the master stores it on
EcVolumeInfo and re-emits it via GetTopologyInfo, so the admin/worker
layer can see which encode run produced each shard set. Field 14 avoids
the enterprise fork's reserved 10-13. Mirror the proto field and both
heartbeat emit sites in the Rust volume server.
* fix(ec): group orphan-source shard completeness by encode generation
countExistingEcShardsForVolume ORed EcIndexBits across every disk, so two
interrupted encode runs whose shard sets overlap unioned into a
false-complete set -- triggering the orphaned-source delete while no
single generation was actually complete. Group shards by encode_ts_ns and
return the largest single generation's count, so the trigger fires only
when one run holds the full set. Shards from pre-upgrade servers
(encode_ts_ns==0) form their own bucket.
The heartbeat carries one encode_ts_ns per (volume, disk), so this
separates generations on different disks; same-disk mixing is prevented
upstream by the pre-encode artifact wipe and the cross-run read guard.
* fix(ec): guard against a nil Ec shard info entry in the generation count
Defensive: a manually-constructed or corrupted topology could carry a nil
entry in EcShardInfos. Skip it rather than dereference.
* fix(ec): carry the encode generation on the EC shard unmount delta
The mount delta sets EncodeTsNs; the unmount deletion delta left it 0.
Populate it from the Ec volume before unloading so both incremental
deltas are consistent (the Rust volume server already does this via its
snapshot diff).
When an EC volume's .vif was missing, NewEcVolume wrote a stub holding
only the version. That stub implies the default 10+4 ratio with
DatFileSize=0 and no encode identity, which the custom-ratio resolver
and the startup credibility checks then read as an authoritative config
-- masking the real ratio of a custom-ratio volume and defeating the
byte-exact .vif gate. Mount with in-memory defaults instead and leave
the real .vif to the encoder or a recovery tool. The Rust volume server
already behaves this way.
* preserve compression state during replication
* explain why ParseUpload skips compression for replica writes
* fix data race on err result in FetchAndWriteNeedle
The local-write and replica-write goroutines all wrote the named err return under an unsynchronized err==nil check. Give each goroutine its own error slot and combine after wg.Wait(): local error wins, then the first replica failure.
* skip redundant decompression of compressed needles during replication
doUploadData decompressed a compressed input only to report the clear-data length on UploadResult.Size, which both replication callers discard. Skip the decompress when IsReplication.
* fix(ec): persist the EC source replica readonly mark
markReplicasReadonly marked each regular replica readonly without
persisting it, so a source-server restart during or after encoding
silently reopened the volume to writes. Those writes are not in the EC
shards, and the later orphan-source cleanup would then delete the
replica, losing them. Send Persist:true so the mark survives a restart;
rollbackReadonly still clears it via VolumeMarkWritable on a failed
encode.
* fix(ec): don't delete a writable source replica during orphan cleanup
cleanupOrphanSourceReplicas issued VolumeDelete to every regular replica
once the EC shard set looked complete, without checking the replica's
current state. A replica that came back writable may hold writes the EC
shards do not contain, so deleting it loses data. Re-probe each replica
via VolumeStatus and skip any that is no longer readonly, logging a
warning instead of deleting.
* fix(ec): check decode .idx writes and fsync decoded .dat/.idx
WriteIdxFileFromEcIndex silently dropped io.Copy and Write errors, so a
short or failed write of the reconstructed .idx went unnoticed and the
caller proceeded to delete the source EC shards. Propagate those errors.
Also fsync the decoded .dat and .idx before returning, so the bytes are
durable before the shards that produced them are removed cluster-wide.
Mirror the .idx fsync into the Rust volume server (its .dat already
syncs and its writes already propagate errors).
* fix(ec): publish decoded .dat/.idx atomically via temp file and rename
WriteDatFile and WriteIdxFileFromEcIndex wrote in place at the final
name with O_TRUNC. A crash mid-write left a truncated .dat/.idx at the
final name beside the still-present EC shards; on restart that partial
file could be mounted as the live volume even though the shards held the
real data. Write to a .tmp file, fsync it, then rename into place and
fsync the directory, so the final name is only ever absent or complete.
A failed decode removes its own temp file rather than leaking it.
Add util.FsyncDir as the shared directory-fsync primitive and reuse the
Rust volume server's fsync_dir for the mirrored change.
* fix(ec): propagate .ecj read errors in the Rust decoder
Path::exists returned false for any error (permission denied, transient
IO), silently skipping the deletion journal and resurrecting deleted
needles as live. Read the journal directly and treat only NotFound as
absent, propagating other errors. The Go decoder already behaves this
way (FileExists returns false only for IsNotExist, then the open
surfaces other errors).
* fix(ec): remove rename destination on Windows in the Rust decoder publish
std::fs::rename does not replace an existing file on every Windows
version. Remove the destination first under a Windows guard before the
atomic publish rename, matching the compaction commit path.
* tiering: stop a shared remote object being deleted while replicas still point at it
A remote-tiered volume's .dat content lives only in one cloud object that all
N replica .vif files point at. Deleting that object while destroying any one
replica, or before a downloaded replica is durable, bricks the survivors.
- volume.tier.move cleanup now deletes old replicas with keepRemoteData=true so
surviving replicas keep the shared object. Document why the alreadyPlaced
anchor needs no replica sync (same-object replicas are byte-identical).
- VolumeTierMoveDatFromRemote now fsyncs the downloaded .dat, fsyncs the
containing directory, trims the .vif (fsynced) and swaps to the local DiskFile
BEFORE deleting the remote object, on both the keep-remote and delete paths.
Only the final DeleteFile is gated by keep_remote_dat_file, so a keep-remote
download leaves the replica served from local disk rather than the shared
object, and a crash before delete merely leaks the object.
- volume.tier.download keeps the shared object for every replica except the
last, which deletes it.
- s3 and rclone download paths fsync the .dat before close.
* storage: swap the volume data backend under the data lock
The tier-download swap closed v.DataBackend and assigned the new local DiskFile
without holding dataFileAccessLock, racing concurrent reads/writes (use of a
closed file / nil deref). Add an exported Volume.SwapDataBackend that performs
the close-and-replace under the lock, and call it from the tier download.
* server: skip directory fsync on Windows in the tier download path
os.Open(dir).Sync() is unsupported on Windows and returns an error, which would
fail VolumeTierMoveDatFromRemote entirely there. Skip the directory fsync on
Windows, matching how the storage-side helper tolerates the unsupported case.
* shell: make multi-replica tier.download resilient to already-local replicas
If a multi-replica download is interrupted and retried, a replica made local
in the prior attempt returns "already on local disk", which aborted the whole
command and left the remaining remote replicas dangling. Treat that case as a
skip-and-continue so a retry completes the rest.
* server: assert downloaded .dat content, not just length, in the tier test
A length-only check passes even if the bytes are corrupted; compare the full
content of the local .dat against the original.
* storage: make vacuum/compaction commit crash-safe with a durable .cpc marker
A crash mid-compaction-commit could lose or corrupt volume data. The
two-rename commit (.cpd->.dat, .cpx->.idx) was not atomic, fsync results
were discarded before renaming over a healthy .dat, a stale .ldb could
poison the needle map, and a duplicate/late commit could delete the live
.dat/.idx outright.
Introduce a durable .cpc commit marker so the swap is atomic across a
crash:
- CommitCompact writes and fsyncs the .cpc marker after makeupDiff
fsyncs the .cpd/.cpx, then runs applyCompactSwap: an existence-guarded
rename of .cpd->.dat and .cpx->.idx, a directory fsync, removal of the
stale .ldb/.rdb, and finally removal of the marker.
- reconcileCompactState recovers an interrupted commit on load: roll
forward (finish the renames) when the marker is present, roll back
(delete the orphan .cpd/.cpx) when it is absent. It runs from a
directory pre-pass keyed on .cpd/.cpc existence, since the per-volume
loader is keyed on .idx/.vif and misses the marker-only and
already-renamed-.idx states.
- applyCompactSwap verifies BOTH .cpd and .cpx exist before touching the
live files, so a stale-state commit (including the Windows
RemoveAll-then-rename path) errors without deleting anything.
- Error-check the fsyncs that gate the swap: the .cpd close-fsync and
.cpx fsync in copyDataBasedOnIndexFile, the makeupDiff .idx fsync, and
MemDb.SaveToIdx.
- generateLevelDbFile rebuilds from offset 0 when the stored watermark
sits past the end of the .idx, instead of replaying zero entries and
poisoning the needle map.
- removeVolumeFiles and cleanupCompact sweep the .cpc marker; cleanup
refuses to unlink the temp files while a marker is present.
Mirror the commit-marker, fsync-before-rename, guard, and
load/reconcile logic in the Rust volume server.
* storage: don't reconcile an already-loaded volume's compaction state on reload
reconcileCompactStates runs in loadExistingVolumes, which is re-invoked at
runtime on SIGHUP (Store.LoadNewVolumes). For a volume that is already loaded
and mid-vacuum, its .cpd/.cpx are live temp files, not crash leftovers --
rolling them back would clobber the in-flight compaction (and remove a live
.ldb out from under an open handle). Skip any vid already present in the
volume map; genuine startup recovery runs before any volume is loaded, so the
map is empty then. Mirrored in the Rust volume server.
Also drop the .note keepVif change that crept into this branch; it belongs to
the replica-copy/verify workstream and is restored to master's behavior here
so the two changes don't collide.
* storage: roll a compaction commit forward per-file, not all-or-nothing
A crash after the .cpd->.dat rename but before .cpx->.idx leaves .cpd gone,
.cpx and .cpc present, and a stale .idx. The roll-forward required BOTH temp
files, so it skipped the swap and cleared the marker, pairing the fresh .dat
with the stale .idx (index corruption). Finish whichever temp file remains:
extract finishCompactSwap to rename .cpd->.dat and/or .cpx->.idx independently;
applyCompactSwap keeps the both-present guard for the normal commit. Existence
in the Rust mirror is checked robustly so a transient error never skips the swap.
* seaweed-volume: propagate directory fsync failures on the compaction commit path
fsync_dir dropped every sync_all error, so the commit could proceed with an
undurable marker or rename and a later restart could recover the wrong
generation. Return the error and check it at the commit call sites (marker write
and the swap), matching the Go fsyncDir which already propagates. Directory
fsync stays a no-op on Windows, where it is unsupported.
* storage: overflow-safe stale-watermark check when rebuilding the leveldb index
watermark*NeedleMapEntrySize can overflow uint64 for a corrupted watermark and
wrap below the file size, defeating the stale-.ldb guard. Compare in entries
(watermark > size/NeedleMapEntrySize) instead, which is equivalent and cannot
overflow. LevelDb-backed needle map is Go-only; no Rust mirror.
* storage: propagate idxFile.Close error when writing the compacted index
SaveToIdx writes the .cpx that is renamed to .idx at commit; a discarded Close
error (buffered data not flushed) could leave a partially-written index after a
crash. Surface it in the same durability gate as the fsync.
* volume: verify before destroy in VolumeCopy and replication repair
Four data-safety fixes around copy/repair paths that could destroy or
resurrect data before verifying the source or survivors.
(a) VolumeCopy no longer deletes a pre-existing local replica up front.
The delete is deferred until ReadVolumeFileStatus on the source succeeds,
so a transient source outage (or a retry after one) can no longer wipe a
healthy destination replica. Gated on source readability only; size/count
comparisons are intentionally not used because they invert legitimately
after divergent vacuum/compaction. Mirrored in the Rust volume server.
(b) volume.check.disk no longer resurrects vacuumed-deleted needles. A
key present-and-live on the source but entirely absent on the target is
ambiguous: it may be a genuine missing write, or a needle deleted on the
target and then vacuumed (its index entry and any tombstone are gone). An
individual needle AppendAtNs has no monotonic relation to a vacuum
watermark, so the old cutoff heuristic could not tell them apart. Without
positive proof the absence is a missing write, the safe default is to NOT
push it back. Tradeoff: a real missing write may go unrepaired until a
tombstone-aware path exists, but we never raise back deleted data.
(c) Over-replication trim no longer resurrects needles or removes the
wrong replica. The pre-delete sync now runs read-only (divergence check
only) instead of writing the doomed replica's needles into the survivor.
pickOneReplicaToDelete only ever removes the smallest of multiple healthy
writable replicas; it refuses the trim when doing so would leave only
read-only/integrity-flagged survivors, since file_count>0 alone cannot
prove the survivor's .dat is readable.
(d) Incomplete-volume (.note) cleanup keeps the shared .vif when an .ecx
for the same vid coexists on the disk, so removing an interrupted regular
copy cannot strip a coexisting EC volume's info file. VolumeCopy now
surfaces .note write/remove errors instead of ignoring them. In the Rust
volume server (where a persisting note is actually reachable) the .note
check moves below the empty-stub sweep and EC validation, keeps the .vif
on EC coexistence, and the mount path fails when a .note still persists.
* shell: scope the over-replication writable-survivor guard to the trim path only
The writable-survivor guard (never trim down to a read-only survivor) lived
inside the shared pickOneReplicaToDelete, so it also gated the misplaced-volume
relocation via pickOneMisplacedVolume -- a misplaced read-only volume (e.g. a
full one) would silently stop being rebalanced. Extract pickSmallestReplica
for the relocation path (which deletes-and-recreates and must act on read-only
replicas), and keep the writable-survivor guard only in pickOneReplicaToDelete
used by the over-replication trim.
* seaweed-volume: recompute keep_vif after invalid-EC cleanup in the .note path
keep_vif used the pre-validation ecx_exists snapshot, so when the EC-validation
step above removed the invalid .ecx/shards, the .note cleanup still preserved a
now-orphaned .vif. Re-check .ecx existence at cleanup time, matching the Go
hasEcxFile re-check.
* shell: keep placement when picking an over-replication victim to delete
The trim picked the smallest writable replica without regard to placement, so
it could delete the only replica in a required failure domain (e.g. with "100"
and replicas dc1 + two in dc2, deleting dc1 leaves both survivors in dc2).
Prefer a writable replica whose removal still satisfies placement, falling back
to the smallest writable only when none does.
* fix(tier): preserve volume data modification time
* fix(tier): best-effort restore of data mtime on download
A failed Chtimes should not abort an otherwise complete tier-down; warn
and continue, matching the EC copy path.
* fix(tier): preserve volume data mtime in rust volume server
Mirror the Go fix: store the source .dat mtime on upload instead of the
upload time, and restore it on the downloaded .dat. Without this a
tiered-then-restored volume loads last_modified_ts_seconds from the
upload/download time, extending its TTL across a restart or remount.
* fix(tier): read source mtime via DiskFile.GetStat()
GetStat() is nil-safe when the backend is closed concurrently and skips a
redundant stat syscall; its cached modTime is the on-disk mtime a reload
reads, since every .dat write or Chtimes is followed by a DiskFile (re)open.
* fix(tier): surface mtime-restore failures on rust tier-down
set_file_mtime now returns io::Result; the tier-down path warns on a
failed restore instead of dropping it silently, so a wrong local .dat
mtime (and the TTL drift it causes) is observable. Matches the Go
download. The EC copy path keeps its best-effort silence.
* fix(ec): never delete recoverable shards on startup/reconcile (size-direction + byte-exact .dat)
EC startup validation and the cross-disk reconcile could delete the only
copy of distributed-EC shards whenever a non-empty .dat sat beside them.
This is the same data-loss class as the empty-.dat-stub fix, now for a
real (non-empty) stale or partial .dat.
validateEcVolume: the discriminating signal is the shard size relative to
the .dat's full encode, not the shard count.
- shards smaller than expected: an interrupted local encode left partial
shards and the .dat is the complete source -> reclaim the .dat.
- shards equal to expected: a valid (or still-distributing) EC volume ->
keep; the shards may be the only copy.
- shards larger than expected: the .dat is the stale/partial side (e.g. an
interrupted decode left a half-written .dat next to the real shards) ->
keep.
Previously any size mismatch, a low shard count beside a .dat, or a
transient stat error returned "delete", wiping sole-copy shards. Now every
ambiguity (size mismatch in either direction, inconsistent shard sizes,
transient I/O error, partial shard set) keeps the data; only a credible
full source .dat with no partial set to lose is reclaimed.
handleFoundEcxFile: a shard load failure (corrupt/locked .ecx, EMFILE
during a mass restart, transient I/O) no longer deletes the EC files when a
.dat exists -- it only unloads and keeps the files for retry. All deletion
authority now flows through validateEcVolume.
pruneIncompleteEcWithSiblingDat: count shards NODE-WIDE (a set split across
sibling disks summing to >= dataShards is independently recoverable and is
left alone), and require the sibling .dat to byte-exactly match the size
.vif recorded at encode time before deleting -- the prior "at least this
big, or bigger than a superblock" gate could trust a stale .dat and wipe
sole-copy shards. EC encode records the source size in .vif, so this gate
works for real volumes; older volumes without it fail safe (kept).
Rust volume server mirrors all of the above: size-direction + keep-on-
ambiguity in validate_ec_volume, keep-on-load-failure in
handle_found_ecx_file, and the node-wide + byte-exact gate in the prune.
The Rust validate/prune paths now resolve the data-shard count from the
volume's own .vif instead of hardcoding 10+4, so custom-ratio volumes are
not mis-sized and wrongly deleted on reboot.
Existing tests that encoded the old (unsafe) "delete on low count / size
mismatch" behavior are updated to the safe expectation, and new regression
tests cover the partial-decode-.dat-keeps-shards and transient-error-keeps
cases (Go and Rust); they fail on the pre-fix code.
* fix(ec): record DatFileSize in planted EC .vif for the prune test; trim comments
The multi-disk lifecycle e2e test planted a partial EC leftover with an
empty .vif, so the byte-exact prune gate (which a real encoded volume
satisfies via its recorded source size) kept it instead of cleaning up.
Record DatFileSize + the EC ratio in the planted .vif, matching production.
Also condense the verbose comments added in this change to the repo's
concise style.
* shell: stop ec.encode/ec.rebuild from destroying live EC shards
Three operator-triggered shell paths could destroy data with no crash:
ec.encode -volumeId on an already-EC volume tore down its shards before
failing. The volume-id path never checked the id was a regular volume:
the collection lookup scans only VolumeInfos (so an EC-only id maps to
""), and volumeLocations succeeds via the EC-location fallback, so
clearPreexistingEcShards full-teardown-deleted every shard cluster-wide
before doEcEncode failed. An EC volume has no .dat, so this is its only
copy. Add assertEncodableRegularVolumes: each requested id must be a
regular volume in the topology snapshot; an EC-only or unknown id is
refused before any teardown. A volume present as both a regular .dat and
stale orphan shards (a failed-encode retry) still passes. This closes
the operator-rerun/script-retry path; a worker racing the snapshot is a
fencing problem handled separately.
ec.rebuild dry-run (the default, without -apply) still issued real
VolumeEcShardsDelete RPCs: prepareDataToRecover appended every
would-copy shard to copiedShardIds even though the copy was skipped, and
the cleanup defer deleted that set unconditionally. Now a dry-run copies
nothing and records nothing to delete (a separate would-copy counter
drives the recoverability check so the dry-run still reports its plan),
and the cleanup runs only under -apply.
ec.rebuild could also self-destruct a live shard: localShardsInfo was
overwritten per disk instead of unioned, so a shard the rebuilder holds
on a non-last disk looked remote, got copied onto itself (in-place
O_TRUNC) and then node-wide deleted. Union local shards across all
disks, and never copy/delete a shard whose only listed holder is the
rebuilder itself.
* shell: address ec destructive-guards review comments
- countLocalShards: union shards across all of the rebuilder's disks so
slot accounting matches what prepareDataToRecover treats as local;
first-match counting overstated slotsNeeded on multi-disk rebuilders
- VolumeEcShardsCopy: resolve SourceDataNode via
pb.NewServerAddressFromDataNode instead of the raw node id, which may
not be a dialable host:port
- assertEncodableRegularVolumes: skip nil DiskInfo map entries, matching
the other topology walks in this file; rename ecOnly to hasEcShards
since the map marks any volume with shards, not only shard-only ones
* fix(ec): make ecx-journal fold and shard rebuild crash-safe
Two EC rebuild paths could silently lose or corrupt data:
RebuildEcxFile folded the .ecj deletion journal into .ecx (in-place
WriteAt tombstones) and then unlinked the journal without flushing the
.ecx writes first. A crash could persist the unlink ahead of the
tombstones, resurrecting deleted needles on the next load. It also read
journal records with a bare n!=size break, so a torn tail silently
dropped the remaining tombstones before the unlink. Now: read records
with io.ReadFull (io.EOF ends cleanly, a torn tail aborts and leaves
.ecj in place for retry), fsync .ecx before removing the journal.
rebuildEcFiles treated a zero/short ReadAt as a clean end-of-input and
discarded the read error, so a truncated or unreadable input shard
produced truncated regenerated shards that were then published as
restored redundancy; the regenerated shards were also never fsynced on
the no-sidecar path. Now: derive the expected shard size from the
present inputs up front (rejecting a divergent/zero-size input), drive
the loop by that size, fail on any short read or short write, and fsync
every regenerated shard before it is mounted/renamed.
Rust volume server mirrors the rebuild fix: rebuild_ec_files now checks
the read_at byte count (it previously discarded it, the same truncation
bug). The Rust ecx fold already synced .ecx before removing the journal.
Custom EC ratios are unaffected: the shard size derives from the input
shards and the loop uses the .vif-resolved data/parity counts, never a
hardcoded 10+4.
* storage: close ecx journal files via defer in RebuildEcxFile
Per review: a single deferred Close per file replaces the per-error-path
manual closes, so new early returns cannot leak descriptors. The journal
is still closed explicitly before its unlink since Windows cannot delete
an open file; the deferred second Close is a harmless no-op.
* fix(util): ignore comment only sql input
Problem: sqlutil.SplitStatements strips SQL comments while scanning, but when no statements remain it falls back to returning the original query. Inputs that contain only comments are therefore reported as executable SQL statements.
Root cause: The no-statements fallback did not distinguish a real single statement from input that had been fully removed by comment filtering.
Fix: Remove the original-query fallback and return an explicit empty slice when scanning produces no statements.
Reproduction: env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/util/sqlutil -run TestSplitStatements -count=1 failed before the fix because comment-only inputs returned the comment text as a statement.
Validation: gofmt -w weed/util/sqlutil/splitter.go weed/util/sqlutil/splitter_test.go; env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/util/sqlutil -run TestSplitStatements -count=1; env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/util/sqlutil -count=1; git diff --check; git diff --cached --check.
Duplicate check: Searched /private/tmp/seaweedfs-codex0610-old-branch-index.tsv and existing tests for sqlutil, SplitStatements, comments, and comment-only. Old PostgreSQL query branches cover malformed wire frames and SQL engine numeric parsing, not comment-only statement splitting.
Co-authored-by: Codex <noreply@openai.com>
* Update weed/util/sqlutil/splitter.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
---------
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* s3: validate indirect filer path inputs
* s3: avoid query parsing on common request path
* filer: scope copy/move source against JWT AllowedPrefixes
maybeCheckJwtAuthorization only checked r.URL.Path, but copy and move read
their source from the cp.from / mv.from query params. A prefix-restricted
token could copy or move data out of a subtree it cannot otherwise reach.
Check every path the request touches, reusing pathHasComponentPrefix so
`..` in the source is collapsed before the prefix match.
* s3: confine iceberg CreateTable location to the catalog bucket
CreateTable derived the metadata bucket and path from the client-supplied
req.Location / req.Name and wrote there directly, so a caller scoped to one
table bucket could place metadata in another bucket (and path.Join collapsed
any `..`). Require the parsed bucket to equal the request's catalog bucket
and reject traversal segments in the table path.
* webdav: clean client path before subFolder confinement
wrappedFs concatenated subFolder + name before the underlying FileSystem
ran path.Clean, so `..` in the request path or COPY/MOVE Destination
resolved across the FilerRootPath confinement boundary. Clean the name as a
rooted path first so traversal segments collapse below subFolder. Only the
non-default -filer.path (non-empty subFolder) setup was affected.
* filer: enforce read-only rule on real write path with destination header
The x-seaweedfs-destination header overrides the path used for storage-rule
matching while the entry is written at r.URL.Path, letting a caller select a
writable rule for a read-only target. When the header is present, also check
the read-only/quota rule against the actual write path.
* fix(storage): never let an empty .dat delete healthy distributed EC shards
A leftover empty .dat stub (a phantom from the pre-fix loader; zero
needles) next to a distributed EC volume's local shards made startup
classify the volume as an interrupted local encode: validateEcVolume
requires >= dataShards local shards when a .dat is present, fails with
the 1-2 shards a distributed volume keeps per disk, and the cleanup
deletes those shards -- the only copies of that part of the volume.
Repeated across restart waves this destroys enough shards cluster-wide
to make the volume unrecoverable.
Go:
- loadExistingVolume: hoist the empty-stub sweep above the EC presence
checks. Previously the .vif-next-to-.ecx guard returned before the
sweep ever ran, so exactly the dangerous layout (stub + .ecx + local
shards) kept its stub and then lost its shards in loadAllEcShards.
- validateEcVolume / checkDatFileExists: treat a .dat <= a superblock
(zero needles) as absent. An empty .dat cannot be the encode source,
so it must never gate shard deletion; this also covers stubs without
a .vif, which the sweep cannot prove are EC leftovers.
Rust mirror (seaweed-volume): the same gate in validate_ec_volume and
check_dat_file_exists (the Rust sweep already ran before validation);
the volume-load skip keeps a plain existence check so fresh,
needle-less volumes still load.
Regression tests in Go and Rust reproduce the production layout (a
zero-byte .dat beside .ecx/.ecj and two shards of a 10+4 volume, with
and without a .vif) and fail without the fix with the shards deleted.
* fix(ec): gate source volume deletion on a recoverable shard set
After EC encode, the shell command and the (plugin) worker task refused
to delete the source volume unless every shard was present, and aborted
otherwise -- leaving the source .dat next to live shards, exactly the
mixed state the startup cleanup mishandles.
Replace the full-set requirement with a recoverability gate shared by
both callers (RequireRecoverableShardSet): deleting a non-empty source
.dat requires at least dataShards distinct shards cluster-wide. Below
that the source is kept and the encode fails as before. A degraded but
recoverable set (>= dataShards, < total) now proceeds with a warning
instead of aborting: the missing shards can be rebuilt from the
survivors, while keeping the source would preserve the dangerous mixed
state. Empty stub replicas are still swept unguarded (OnlyEmpty) -- an
empty .dat has nothing to lose.
dataShards/totalShards stay parameters so enterprise custom EC ratios
share the helper verbatim.
* test(ec): use recoverable shard verification gate
Reject copy sources whose bucket/object fail IsValidBucketName /
IsValidObjectKey, the helpers validateRequestPath already applies to the
request URL. The object is joined onto the bucket path and `.`/`..`
segments are collapsed by the filer, so without this the source need not
stay within the parsed bucket. Route UploadPartCopy through
ValidateCopySource too; it previously only checked for empty bucket/object.
* feat(storage): sweep leftover empty EC .dat stubs on volume server startup
An EC volume keeps no local .dat. The pre-fix loader left empty 8-byte
superblock .dat stubs next to EC metadata (one per lone .vif). Left in
place each loads as a phantom empty volume, and the same vid's stub on
two disks of one server blocks Rust startup via the duplicate-vid check
in Store::add_location -- the prior fix stops creating new stubs but does
not clean up existing ones.
On startup, when a .dat is empty (<= a superblock, i.e. zero needles) and
its .vif marks the volume erasure-coded, remove the stub (+ empty .idx)
instead of loading it. The real data is in the EC shards, so the empty
stub holds nothing to lose. Non-EC empty .dat files (e.g. freshly
allocated volumes) are left alone.
Done in both Rust (load_existing_volumes) and Go (loadExistingVolume),
with regression tests that fail without the sweep.
* refactor(storage): extract empty EC .dat stub sweep into its own function
Move the startup stub-sweep into remove_empty_ec_dat_stub (Rust) and
removeEmptyEcDatStub + vifIsEcVolume (Go) for clearer logic, and look up
the .vif in both the data and idx directories (each read at most once) so
a stub is still found when -dir.idx is configured. Adds direct tests for
the idx-directory lookup on both engines.
* admin: configure maintenance tasks via admin.toml
Maintenance task settings could only be edited in the admin UI and live
under <dataDir>/conf, so they silently reverted to defaults whenever the
data directory was recreated. An optional admin.toml now declares vacuum,
balance, and erasure coding settings; keys set there are written through
to the persisted task configs at every startup, overriding UI edits, so
the configuration stays declarative. Generate an example with
"weed scaffold -config=admin".
* vacuum: round min volume age up to whole hours
MinVolumeAgeSeconds was truncated by integer division when converted to
the hour-granular protobuf field, so a sub-hour setting silently became
0 and disabled the age guard.
* admin: split and normalize preferred_tags from admin.toml
A comma-separated string, as set via environment variable, came through
viper as a single slice element. Split on commas and reuse
util.NormalizeTagList, matching the plugin config path.
* scaffold: clarify admin.toml wording
* shell: volume.tier.move can move volumes between data centers
-fromDataCenter scopes volume selection to volumes with a replica in
that data center. -toDataCenter constrains move destinations and
replication fulfillment. With identical disk types both flags are
required, moving full volumes between data centers on the same tier.
* shell: assert node identity in data center filter test
* shell: tier move resumes when the volume is already on the target
A replica already on the target tier and data center, typically left by
an interrupted earlier run, anchors the move: skip the copy and only
complete replication fulfillment and old replica cleanup. Previously
such volumes hit the no-destination path and the stale source replicas
were never removed.
386 test binaries execute natively on the amd64 runner, so the suite
catches what vet cannot: unaligned 64-bit atomics and arithmetic that
wraps at runtime. -short keeps the e2e suites on amd64 only.
* fix(tests): keep EC e2e fid cookie arithmetic in uint32
The cookie constants 0x9490CA00 and 0x9500CA00 were added to the int
loop variable before conversion, overflowing 32-bit int at compile
time on linux/386 and linux/arm. Convert the loop variable instead so
the addition stays in uint32.
* fix(tests): pass s3client max backoff in milliseconds
MaxBackoffDelay is documented as milliseconds and multiplied by 1e6
before use, but the example set it to 5s in nanoseconds, yielding an
absurd backoff on 64-bit and a compile-time int overflow on 32-bit.
* ci: type-check code and tests for linux/386
64-bit-only constant arithmetic keeps slipping into test files and
breaking 32-bit downstream builds. Vet the whole root module under
GOOS=linux GOARCH=386 so these fail in CI instead of after release.
* fix(tests): convert s3client backoff to Duration before scaling
The ms-to-ns multiplication ran in int, wrapping at runtime on 32-bit;
scale by time.Millisecond after the Duration conversion instead.
The quota enforcement loop already computes each bucket's configured
quota and effective read-only flag every minute, but neither was
visible to monitoring, so operators could not alert before a bucket
flips read-only.
Add two gauges next to the existing bucket size metrics:
SeaweedFS_s3_bucket_quota_bytes configured quota; the series is only
present while the quota is enabled,
so size/quota utilization queries
never divide by zero
SeaweedFS_s3_bucket_read_only 1 when the bucket's location rule is
read-only (over quota or manually
locked), 0 otherwise
Both are cleaned up with the other per-bucket gauges on bucket
deletion and inactivity TTL.
* feat(ec): add encode_ts_ns to EC shard metadata and the shard read RPC
EcShardConfig and VolumeEcShardReadRequest gain an int64 encode_ts_ns
(encode time in unix nanos). It rides in .vif and the read request so a
read can be scoped to the encode run that produced the index.
* fix(ec): stamp each encode and reject cross-run shard reads
Generate stamps EncodeTsNs into the volume's .vif. Reads carry it to the
shard's owning volume (resolved together via FindEcVolumeWithShard, so a
multi-disk server validates the disk that actually serves the bytes) and
reject a shard from a different encode run, recovering from parity. A
zero on either side (pre-upgrade volume) skips the guard.
* fix(ec): stamp the encode identity on the worker-generated .vif
The worker-local encode path now writes EncodeTsNs (and the resolved EC
ratio) into the .vif, so the read guard is not silently off for volumes
encoded by the maintenance worker.
* fix(ec): wipe stale EC artifacts before re-encoding
VolumeEcShardsGenerate evicts any in-memory EcVolume for the volume and
removes its on-disk shard/index/sidecar files before writing fresh ones,
so a retried encode never builds on a partial prior run and the unlink
frees the inodes instead of leaving open fds serving old bytes.
* fix(ec): unmount EC shards across all disks
UnmountEcShards walked only the first disk holding the shard, leaving a
duplicate copy mounted on a sibling disk (split-disk reconciled volumes)
still serving and heartbeating. Traverse every disk and emit one
deletion delta per disk.
* fix(ec): delete orphan shards without a local .ecx
deleteEcShardIdsForEachLocation gated shard-file removal on a local .ecx,
so it could not clean an orphan .ecNN left by a failed copy on a disk
with no index. Delete the requested shard files unconditionally; the
index-file (.ecx/.ecj/.vif) routing stays gated as before.
* fix(ec): clear stale EC shards cluster-wide before re-encoding
ec.encode unmounts and deletes EC shards for the target volumes on every
node before regenerating: fatal for the shards the topology reports
(mounted leftovers), best-effort for the rest (a sweep that catches
unmounted failed-copy orphans). A down node is a no-op.
* fix(ec): don't nil EC fds on close so reads can't race eviction
A reader resolves an EcVolume/shard under the lock then reads after it is
released, so an eviction that nils ecxFile/ecdFile would race that read
and panic. Close the fds without nilling the fields: the field is now
write-once (no data race) and a concurrent read hits a closed fd, getting
a clean error that the caller recovers from parity.
* fix(ec): wipe stale EC artifacts on every disk and surface failures
The pre-encode wipe only deleted beside the source volume, so a stale
shard on a sibling disk survived and could be mounted against the new
index at reconcile. Sweep every disk. Removal also ignored os.Remove
errors, reporting a failed cleanup as success and letting a stale shard
join the next generation; surface the first real failure (treating
already-gone as success) from removeStaleEcArtifacts and the shard delete.
* fix(ec): log when a local shard is skipped for a different encode run
The cross-run guard returned errShardNotLocal, indistinguishable in logs
from a genuinely-absent shard. Add a V(1) line naming both EncodeTsNs so
operators can tell "wrong encode generation" from "shard not here".
* fix(ec): surface metadata removal failures in the shard delete path
deleteEcShardIdsForEachLocation still dropped os.Remove errors on the
.ecx/.ecj/.vif/sidecar cleanup. A surviving stale .ecx is the orphan-index
condition this path prevents, so route those through removeFileIfExists and
return the first real failure instead of reporting cleanup as success.
* fix(ec): fail orphan cleanup when a reachable node's delete fails
The pre-encode orphan sweep swallowed every error for unreported (node,
volume) pairs. That is only safe for an unreachable node, which cannot
receive this encode's new generation. A reachable node whose delete
genuinely failed (permission/IO) keeps an orphan shard that a later copy
re-stamps with the new run's volume-level .vif identity, so the read guard
would accept stale data. Surface those; stay best-effort only for
unreachable nodes (gRPC Unavailable / no status).
* fix(ec): guard ecjFile under its lock in the EC delete path
EcVolume.Close nils ecjFile under ecjFileAccessLock; a delete that resolved
its .ecx lookup before a concurrent eviction (the generate-time
UnloadEcVolume) could then reach the journal append with a nil fd. Bail
with a clear "volume closed" error under the lock instead.
* fix(ec): reject an unstamped shard when the caller has an encode identity
The read guard required both identities nonzero, so a current (stamped)
caller accepted a holder with identity 0 and could be served a stale
pre-upgrade shard. Reject when the caller is stamped and the holder
differs (including unstamped); stay lenient only when the caller itself
has no identity (pre-upgrade reader). A skipped shard recovers from parity.
* fix(ec): full-teardown delete so cluster cleanup wipes a whole generation
The pre-encode cluster sweep deleted only the listed canonical shards on
remote nodes, leaving index/sidecar (and, on builds with versioned
generations, those too) behind. Add a full_teardown flag to
VolumeEcShardsDelete that evicts the volume and wipes every EC artifact for
it on every disk via removeStaleEcArtifacts; the shell and worker pre-encode
cleanup paths set it. Other delete callers (balance/decode/repair) are
unchanged.
* fix(ec): take ecjFileAccessLock before the nil-check in Sync and Close
Sync and Close read ev.ecjFile before acquiring ecjFileAccessLock while
Close nils it under the lock, a data race on the field. Take the lock
first, then nil-check inside, in both.
* fix(ec): acknowledge full_teardown so a pre-upgrade server can't fake success
An old volume server silently ignores full_teardown and returns success
for an ordinary delete, so the caller wrongly believes the generation was
wiped and copies a fresh gen-0 onto an unwiped node. Echo full_teardown_done
in the response; the worker destination cleanup fails when it is absent, and
the shell cluster sweep fails for a reported (mounted) leftover while staying
best-effort for an unreported node. encode_ts_ns stays an accepted transient
(an old server just skips the new read guard, no regression).
* fix(ec): fail the pre-encode sweep for any reachable node that can't ack teardown
A reachable pre-upgrade server ignores full_teardown and returns success
without wiping an orphan, which a later copy then folds into the new
generation. Treat a missing full_teardown_done ack as fatal for every
reachable node (best-effort only for a gRPC-unreachable one), not just for
topology-reported pairs.
* fix(ec): return the served shard identity and validate it client-side
The encode identity was only enforced server-side, so a pre-upgrade server
ignored the request field and served bytes unchecked. Echo the served
shard's EncodeTsNs on every read response chunk and have the client reject a
mismatch (including 0 from an old server), so the guard holds regardless of
server version; a rejected read recovers from parity.
* fix(ec): reject a short/empty remote shard read instead of serving zeros
doReadRemoteEcShardInterval accepted an immediate EOF or a short stream and
returned success with a partly zero-filled, unvalidated buffer (the server
stamps the identity only on chunks that carry bytes). A non-deleted interval
must arrive whole: require n == len(buf), exempting the is_deleted
short-circuit (n=0), matching readLocalEcShardInterval's local check. A short
read now fails so the caller recovers from parity.
* test(ec): fake volume server echoes the full_teardown acknowledgement
The worker now fails a teardown delete that isn't acknowledged (so a
pre-upgrade server can't silently skip the wipe). The fake server's no-op
VolumeEcShardsDelete returned an empty response, which the worker read as a
skipped teardown and aborted the encode. Echo full_teardown_done.
* feat(ec): mirror the encode-run identity guard + full_teardown into the Rust volume server
The Go volume server stamps an encode-run identity (encode_ts_ns) into the .vif
and rejects a read served from a shard of a different run; full_teardown wipes a
whole generation and acknowledges it. The Rust volume server had none of it.
Mirror the shared logic: load encode_ts_ns from the .vif onto the EcVolume,
stamp it on every read response, and reject a request/response mismatch on both
the server and the distributed-read client (recovering from parity); handle
full_teardown by evicting the volume and wiping every EC artifact on each disk,
echoing full_teardown_done so the caller can detect a server that ignored it.
* fix(ec): remove a stale .vif on full teardown of a shard-only node
A shard copy installs shards + .ecx before .vif, so an interrupted copy after a
teardown could mount the new files under the previous run's identity / version /
shard ratio / dat_file_size carried by the surviving .vif. Remove .vif during
full teardown, gated on .idx absence so a source-volume holder keeps its live
.vif. In Rust this lives in a teardown-only helper so the reconcile / load-
fallback paths (which share the base removal) still preserve .vif.
* fix(ec): treat a missing teardown ack as fatal, not as an unreachable node
isNodeUnreachable returned true for any non-gRPC-status error, so a reachable
pre-upgrade server's missing full_teardown_done ack (a plain error) was
classified unreachable and the unreported pair was silently skipped. Classify
only a real codes.Unavailable as unreachable, and wrap the missing ack in a
sentinel the sweep treats as fatal regardless. A genuinely down node still
surfaces as Unavailable from the RPC and stays best-effort.
* fix(ec): reject a short shard read in the local EC needle reader
read_ec_shard_needle ignored the byte count from shard.read_at and appended the
whole pre-sized buffer, so a truncated shard's zero-filled tail passed the later
length check and parsed as garbage. Require n == buf.len() per interval, erroring
on a short read like the local interval reader already does.
* fix(ec): probe reachability before skipping a node that returns Unavailable
The pre-encode sweep skipped any node whose teardown delete returned
codes.Unavailable, but a reachable volume server in maintenance mode also
returns that code for the maintenance-gated delete, so its stale EC files were
left behind on a node that can still receive the new generation. Confirm with a
non-maintenance-gated empty-target Ping: skip only when the node fails the probe
too (genuinely unreachable).
* fix(ec): use try_exists for the teardown .vif .idx guard
The teardown-only .vif removal gated on Path::exists(), which returns false on a
permission/IO stat error, so a stat failure on a present .idx would read as a
shard-only node and delete the live source volume's .vif. Gate on
try_exists() == Ok(false) instead, preserving the sidecar on any stat error.
* fix(ec): only skip a sweep node when a Ping confirms it is transport-down
The pre-encode sweep skipped a node whenever its teardown delete and a liveness
Ping both failed, but it treated ANY Ping error as down — an application-level
Internal/ResourceExhausted, or Unimplemented from a pre-Ping server, left a
reachable node's stale generation in place. Classify the Ping tri-state and skip
only when it transport-fails with codes.Unavailable; a reachable or inconclusive
node stays fatal.
* fix(ec): exclude sweep-skipped nodes from the encode's rebalance
The pre-encode sweep skips a genuinely-down node best-effort, but the rebalance
then recollected the current topology — a node that recovered between the two
could become a copy target and receive the new generation while still holding
its stale, never-cleared shards. Have the sweep return the skipped set and
exclude those nodes from the rebalance for this encode, so a node we could not
clean cannot receive the new generation. Standalone ec.balance is unaffected.
* fix(ec): re-sweep recovered nodes before generation so they aren't stranded
A node skipped as down by the pre-encode sweep is excluded from the rebalance,
but it can recover and become the generation host — mounting all shards locally,
then being excluded from distribution. Union-only verification accepts all
shards on one node and deletes the originals: a single point of failure. Re-sweep
the skipped nodes just before generation; one whose teardown now succeeds leaves
the skipped set and rebalances normally, while a node still down stays skipped.
* fix(ec): abort the encode if a selected source is still skipped after re-sweep
The re-sweep un-skips a recovered node, but the source was selected before it and
a node can stay down through the re-sweep then recover just in time to be the
generation host — mounting all shards locally while still excluded from the
rebalance, which union-only verification accepts before deleting the originals.
Abort the encode when a selected source remains skipped after the re-sweep.
* fix(ec): batch delete returns retriable 503 when a volume became EC mid-batch
If a volume is not EC at the batch-delete classification but is encoded to EC and
its .dat deleted before the regular-volume mutation, the mutation returns an exact
"not found" that the filer chunk-GC treats as completed, dropping the delete.
Recheck EC presence under the mutation lock and return a retriable 503 with the
"try again" token so the filer requeues it onto the EC path.
* fix(ec): recheck EC state before the regular batch-delete mutation
ec.encode mounts EC shards (copied from the .dat) before deleting the originals,
so a volume can be EC while its .dat still exists. The batch delete only rechecked
EC after a NotFound, so a successful regular-volume delete in that window wrote a
tombstone to the soon-removed .dat — the delete was lost and the needle resurrected
from the pre-tombstone shards. Recheck has_ec_volume under the write lock before
delete_volume_needle and return a retriable 503 so the filer requeues onto the EC path.
* fix(volume): make the metrics push test independent of test order
test_push_metrics_once asserted the pushed body contains the request-counter
family without ever touching the counter — a CounterVec with no children emits
nothing, so the assertion only held when another test had already created a
labelset in the shared registry. Create one in the test itself.
On volumes failing scrubs, the detail output can get very verbose, which makes
reading results difficult. Most users won't care about this information to
begin with - just whether or not volumes pass scrub tests.
This MR gates the display of scrub result details behind a `--details` flag.
* ci(s3tables): drop docker pre-pull from Lakekeeper job
The lakekeeper repro is pure Go against the local weed binary; the job
kept failing on Docker Hub timeouts pulling python:3 and localstack
images the test never runs. Also drop the stale python-in-docker
comments left from the old harness.
* ci(s3tables): serve python:3 from GHA cache in the STS job
Retried pulls still die when both mirror.gcr.io and registry-1.docker.io
are unreachable from the runner. Cache the saved image tarball under a
weekly key: an exact hit skips the registry entirely, a miss pulls fresh
and refreshes the cache, and a stale tarball from a previous week is the
fallback when Docker Hub is down.
* ci(spark): pre-pull the spark tag the test actually runs
The workflow warmed apache/spark:3.5.8 with retries while the
testcontainers setup runs apache/spark:3.5.1, so the real image was
pulled at test time with no retry at all.
* Filter metadata events before unmarshaling them per subscriber
Every subscriber unmarshaled every log entry into a full event just to
run the path filter, and entries carry complete chunk lists, so a fleet
of path-filtered subscribers spends almost all replay CPU materializing
events it then discards. A shallow wire scan now extracts just the
directory, entry names and rename destination into a skeleton event,
feeds the same matcher, and skips the decode for entries the subscriber
cannot match. Any scan surprise (malformed bytes, merged duplicate
message fields) falls back to the full decode, and the unsynced-events
heartbeat keeps firing for skipped entries.
* Raise the legacy replay cap
The cap was sized when every replay pinned a private chunk reader per
source filer. Replays now share decoded chunks, so sixteen needlessly
serializes subscriber catch-up; the expensive part stays bounded by the
cache's load gate.
* Weight concurrent log-chunk loads by size
The flat eight-load gate let eight tiny chunks through as reluctantly as
eight full ones. Charge each load's chunk size against a 128MB in-flight
budget instead: small chunks decode wide open while full-size ones still
serialize enough to cap the transient peak. Oversized weights clamp to
the budget so they can always acquire.
* Propagate heartbeat send failures and reset the skip counter
A failed heartbeat send means the stream is gone, so end the replay
instead of scanning on. A delivered event also resets the skip counter,
keeping the heartbeat cadence relative to the last thing the client
actually received.
* Share the unsynced-events counter across the prefilter and delivery
Two independent counters could starve the heartbeat: alternating drops
reset each side before either reached its threshold. One shared counter
increments on every dropped entry, prefiltered or not, and only an
actual delivery resets it, restoring the original cadence exactly.
* Tighten comments
* Benchmark the subscription match paths
For a thousand-chunk event that the subscriber filters out, the shallow
scan matches in 10us and 9 allocations against 175us and 4031
allocations for the full decode.
The admin UI served embedded static files uncompressed and without
cache headers: embed.FS has zero mod times, so no Last-Modified, no
ETag, no 304s -- every page load re-downloaded ~700KB of css/js in
full, which gets painful over slow or tunneled links.
Gzip the static tree at generation time (go generate ./weed/admin)
and embed only the compressed mirror, shrinking the binary ~1.5MB.
The handler hands the pre-compressed bytes to gzip-capable clients,
decompresses for the rest, and sets Cache-Control, per-variant
content-hash ETags and Vary so repeat loads revalidate with a 304.
bootstrap.min.css goes 232KB -> 30KB on the wire.
A drift test keeps static_gz/ in sync with static/.
The eachLogDataFn error path printed the full LogEntry proto. For an
entry carrying a large chunk manifest that is hundreds of KB of escaped
bytes in a single log line, burying the actual error -- often just a
subscriber disconnect -- at the very end. Log the key, timestamp,
offset and data size instead.
* elastic: fix listing against a missing or empty directory index
The refresh 404 leaked into the named return, so the first listing of a
directory whose index does not exist yet returned an error instead of an
empty result. Sorting also fails on an index with no documents
("No mapping found for [_id] in order to sort on"); unmapped_type
keeps the resumed-listing path working there.
* add elastic8 filer store for Elasticsearch 8
Elasticsearch 8 disables _id fielddata by default, so the elastic7
store's directory listings fail with "Fielddata access on the _id
field is disallowed". elastic8 uses the same client and configuration
options, but also indexes the document id as an Id field and sorts
listings on Id.keyword.
Problem: Signature V4 SignedHeaders parsing accepted empty header name segments such as host; or ;host. Malformed Authorization headers could continue into signature verification instead of failing during header parsing.
Root cause: parseSignedHeader only checked that the SignedHeaders value was non-empty, then split it on semicolons without validating each element.
Fix: reject empty or whitespace-only signed header elements with ErrMissingFields before returning the parsed header list.
Reproduction: go test ./weed/s3api -run TestParseSignedHeaderRejectsEmptyHeaderNames -count=1 failed before the fix because SignedHeaders=host; returned ErrNone.
Validation: gofmt -w weed/s3api/auth_signature_v4.go weed/s3api/auth_signature_v4_test.go; git diff --check; go test ./weed/s3api -run TestParseSignedHeaderRejectsEmptyHeaderNames -count=1; go test ./weed/s3api -count=1
Co-authored-by: Codex <noreply@openai.com>
* Bound the metadata-log flush queue
A stalled flush, e.g. slow volume servers under a reconnect storm, let up
to 256 queued 8MB buffer copies pin two gigabytes per log buffer while
producers kept filling the queue. Cap the queue at 16 so a sustained
stall backpressures writers instead of growing the heap. The flush
goroutine never feeds back into the buffer (system-log paths skip event
notification), so blocked producers cannot deadlock the consumer.
* Don't drop a force-flushed buffer on a full queue
ForceFlush enqueued with a two-second timeout, but by then the live
buffer was already sealed and reset, so a timed-out send silently lost
the copy. Block until the flush is queued; the wait for completion stays
bounded since the data is durable once the flush loop drains it.
* Never close the flush channel
ShutdownLogBuffer closed flushChan while producers could still be
blocked sending into it, which panics. Terminate loopFlush with a nil
sentinel instead, so the channel is never closed, and give every
producer-side send a shutdown escape so none parks forever once the
flush loop exits. Everything queued before the sentinel still drains,
preserving IsAllFlushed semantics.
* Copy the shutdown flush under the buffer lock
Every other copyToFlush call site holds the lock; the shutdown path read
the live buffer unlocked while producers could still be appending.
* Share metadata-log replays per chunk instead of per file
Log file chunks are immutable: each metadata-log flush uploads one whole
buffer of complete records as a new chunk, and appends only add chunks.
So cache decoded entries per chunk, with no age gate and no fingerprint
revalidation. The per-file cache excluded files younger than two flush
intervals, which is exactly the hot tail that every tailing or
reconnecting subscriber replays — each through a private chunk reader
holding an 8MB buffer and decoding the whole file from byte zero.
A chunk's flush time also upper-bounds every record timestamp inside it,
so a tail replay now skips cold chunks without reading them at all.
If a chunk does not decode standalone (records spanning chunk
boundaries, or a corrupt size prefix), fall back to streaming the whole
file as one byte stream, resuming after the last yielded entry.
* Evict idle metadata-log cache entries
The replay cache only evicted on insert, so once filled it held its full
budget forever. Stamp entries on use and sweep the LRU tail every minute,
dropping anything untouched for five minutes; the cache now holds memory
only while subscribers actually replay.
* Reject implausible records when decoding log chunks
proto.Unmarshal is permissive: empty payloads and unknown-field garbage
parse without error, so a chunk starting mid-record could decode by
coincidence and get cached instead of falling back to the byte stream.
Enforce what the writer guarantees - records are never empty and carry
strictly increasing positive timestamps within one flushed buffer.
* Gate the singleflight test on an open flight
The sleep alone only probabilistically created concurrent misses; a
started channel now proves the loader holds the flight before callers
are released.
Problem: SigV4 chunked upload checksum trailer parsing rejected mixed-case checksum header names even though HTTP header field names are case-insensitive.
Root cause: extractChecksumAlgorithm compared the x-amz-trailer value and trailer header key against exact lowercase strings.
Fix: Trim and lowercase checksum trailer header names before matching supported checksum algorithms.
Reproduction: go test ./weed/s3api -run TestExtractChecksumAlgorithmIsCaseInsensitive -count=1 with X-Amz-Checksum-Crc32; before the fix it returned unsupported checksum algorithm.
Validation: gofmt -w weed/s3api/chunked_reader_v4.go weed/s3api/chunked_reader_v4_test.go; git diff --check; go test ./weed/s3api -run TestExtractChecksumAlgorithmIsCaseInsensitive -count=1; go test ./weed/s3api -count=1
Co-authored-by: Codex <noreply@openai.com>
* ci(s3tables): route Docker Hub pulls through mirror, drop unused buildx
The integration jobs set up docker/setup-buildx-action only to docker
pull/run images; the buildx bootstrap pulls moby/buildkit from
registry-1.docker.io, which times out and fails the whole job before any
test runs. These jobs never docker build with buildx, so the setup is
pure overhead and an extra registry dependency.
Replace it with a daemon registry-mirror pointing at mirror.gcr.io (a
pull-through cache for Docker Hub) and retry the pre-pulls a few times.
That removes the buildkit pull entirely and routes the rest through the
cache, with graceful fallback to Docker Hub on a miss.
* ci: route Docker Hub through mirror in remaining docker test workflows
Same registry-1.docker.io timeout fix for the other integration jobs.
s3-spark only docker pulls/runs an image, so drop the vestigial buildx
setup and pull through the mirror with retries, matching s3-tables.
kafka-quicktest, s3-proxy-signature, e2e and postgres build/compose and
genuinely need buildx (e2e/postgres export a local layer cache, which the
default driver can't), so keep it and just configure the mirror first —
that way even the moby/buildkit bootstrap pull is served from the cache.
Left samba/pjdfstest alone: they build-push to a local registry and pull
from localhost, so buildx is required and there's no Docker Hub runtime
pull to mirror.
perf(filer): share decoded log entries across metadata replays
Concurrent SubscribeMetadata replays of the same persisted log history each
opened a chunk reader per source filer and re-decoded the same files, so a
reconnect storm multiplied into many GB of buffers. Cache the decoded entries
of completed log files in a bounded LRU, coalescing concurrent loads with
single-flight and bounding concurrent decodes. Each hit is validated against
the file's current chunk set, so a file that received a late append is
reloaded rather than served stale; reads that stop on an unreachable chunk are
delivered but not cached so a transient outage re-probes on the next replay.
* fix(filer.sync): replicate a rename as create-then-delete, not an in-place update
A rename arrives as a single metadata event carrying both the old and new
entry. The filer sink was routed to UpdateEntry, which looks up the old
path but issues the update against the new parent without changing the
name — and the filer UpdateEntry RPC cannot move an entry. So the rename
was dropped: the old path lingered and the new path never appeared
(same-dir renames rewrote the old name in place).
Route a real move (the sink path changed) through CreateEntry(new) then
DeleteEntry(old) in both the replicator and the filer.sync/backup driver,
the way the other sinks already handle it; reach UpdateEntry only for true
in-place updates. Create before delete so a crash between the two leaves
the entry visible rather than lost.
* fix(filer.sync): derive the rename delete key like the create key, guard the watched root
The rename delete leg rebuilt the old key with a raw util.Join, bypassing the
sink-side key normalization the create leg gets from buildKey — so a rename
could create the new entry and then fail to delete the old one under a
transformed key. Build the old key through buildKey too, and skip the delete
when the moved entry is the watched root itself (where the old key would
resolve to the target root and recursively delete the whole sink tree).
* test(filer.sync): cover the in-place update delete-then-create fallback order
The recording sinks always reported foundExisting, so the fallback that an
in-place update takes when the entry is missing on the sink was never run.
Make it configurable and assert the fallback deletes before it recreates the
same key, in both the replicator and the filer.sync drivers.
* feat(filer.sync): move filer-sink renames natively via AtomicRenameEntry
create-then-delete is unsafe for the filer sink: CreateEntry returns nil
without creating on a transient chunk-copy error, so the paired delete could
remove the only valid destination copy; a directory rename also deleted the
old subtree before descendants were recreated, and left old chunks behind.
Add an optional EntryMover sink capability and implement it on the filer sink
via AtomicRenameEntry — one atomic, metadata-only move that relocates a whole
subtree in a single transaction. Renames prefer it; sinks without a native
move keep create-then-delete. When the old path is already gone (a descendant
the parent rename moved, or one never replicated) MoveEntry creates the new
path instead, re-checking existence with a lookup so a rolled-back move that
left the old entry intact is retried rather than mistaken for gone.
* docs(filer.sync): note entryMissing's gRPC not-found string fallback is deliberate
* fix(http): accept no content delete responses
Problem: util/http.Delete reports an error for a successful HTTP 204 No Content response.
Root cause: Delete only treats 200 OK, 202 Accepted, and 404 Not Found as non-error responses, omitting the standard 204 status commonly returned by DELETE endpoints.
Fix: Include http.StatusNoContent in the Delete success status set.
Reproduction: go test ./weed/util/http -run TestDeleteTreatsNoContentAsSuccess -count=1 fails before the fix with an empty error for a 204 response.
Validation: go test ./weed/util/http -run TestDeleteTreatsNoContentAsSuccess -count=1; go test ./weed/util/http -count=1; git diff --check; git diff --cached --check
Co-authored-by: Codex <noreply@openai.com>
* Update weed/util/http/http_global_client_util_test.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
---------
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* fix(filer): propagate multi-filer metadata log read errors
A genuine (non not-found) read error in one filer's log stream was logged
and skipped, then the merged cursor advanced past the gap, silently
dropping that file's events. Abort the whole replay so the subscriber
re-reads from the unchanged position; chunk-not-found still skips.
* perf(mount): read persisted metadata log chunks directly from volume servers
Set LogFileReaderFn so the filer returns log file references and the mount
reads the chunk data itself, instead of the filer reading, decoding, and
streaming every persisted entry. Keeps a reconnect storm of many mounts
from concentrating hundreds of concurrent log replays in filer memory.
* perf(filer): pre-size chunk stream reader buffer to view size
The chunk size is known up front, so grow the buffer once instead of
letting bytes.Buffer double as the streamed pieces arrive (which
transiently overshoots to ~2x per reader).
* fix(filer): bound concurrent persisted-log replays
Each server-side replay holds an open chunk reader per source filer plus a
readahead buffer, so a reconnect storm of clients that predate the
metadata-chunks offload multiplies into many GB. Gate replays with a
semaphore; abort the acquire when the subscriber's stream is gone so
cancelled clients do not pile up parked goroutines.
* feat(filer): record object size distribution histogram
Add SeaweedFS_filer_object_size_bytes, a histogram sampled when an
object is first created in the filer namespace, covering every write
protocol (S3, WebDAV, FUSE mount, direct HTTP). Buckets follow the
1KB/100KB/1MB/100MB/1GB ranges operators use to size collections.
Directories, overwrites, and metadata-only updates are not sampled, so
the bucket counts track the size distribution of distinct objects.
* feat(metrics): add filer object size distribution dashboard panels
Add a write-rate-by-size-range graph and a size-distribution bar gauge,
driven by SeaweedFS_filer_object_size_bytes, to the standalone and Helm
Grafana dashboards. Per-range subtractions are clamped at zero so
transient negative rate() samples do not render below the axis.
* fix(filer.sync): scope filesystem key sanitization to the local sink
destKey ran every sink key through escapeKey, whose Windows build strips
colons. Colons are illegal in NTFS filenames so the local sink needs that,
but s3/filer/azure/gcs/b2 accept them as ordinary key bytes — stripping
them silently diverged the destination key (a source a:b replicated as ab).
Move the sanitization into the local sink behind a Windows build tag,
applied at every entry point so the previously-unescaped in-place-update
paths stay consistent. Non-local sinks now keep the raw key; non-Windows
builds are unchanged; a leading drive-letter colon is preserved.
* test(filer.sync): cover incremental destKey and localsink update/delete sanitization
Lock the colon-preserving behavior for the incremental destKey branch, and
extend the Windows local-sink test to assert UpdateEntry and DeleteEntry also
sanitize the key, not just CreateEntry.
* fix(filer.backup): skip replay events whose chunk no longer exists on the source
"Source" is the filer we replicate FROM (e.g. green in a green->blue backup).
Replaying the metadata log from a checkpoint can hit an event whose chunk was
since overwritten/deleted and garbage-collected on the source volume. Fetching
it returns 0 bytes (a permanent size mismatch), which the sink propagated to the
subscription — so the same offset retried forever and replication stalled.
Skip the event only when proven stale; otherwise keep refusing so genuine loss
of a live file still halts loudly:
- onCorruptChunk centralizes the three errChunkSizeMismatch sites.
- getEntryMtimeNs compares mtime at nanosecond precision so same-second rewrites
(git's config.lock dance) are ordered correctly.
- sourceSupersedes re-reads the entry's current state on the source: gone
(ErrNotFound) or a strictly-newer mtime than the replayed version -> skip;
any other lookup error keeps the entry.
Skipping is lossless: events are full-entry snapshots, so a later event
re-carries the current chunks and a delete event reconciles a removed file.
* test(filer.backup): cover the superseded-chunk skip decision
- TestSourceSupersedes: not-found (sentinel / wrapped / gRPC string) and nil
entry -> skip; network error -> keep; source newer -> skip; same/older -> keep.
- TestGetEntryMtimeNs: nanosecond precision, same-second ordering, nil safety.
- TestOnCorruptChunkRefusesWhenSupersessionUnconfirmed: never skip silently when
supersession cannot be confirmed.
* fix(filer.backup): don't infer supersession for incremental sinks
In incremental mode the sink key carries a date prefix
(sinkDir/YYYY-MM-DD/relPath) that cannot be reversed to a real source path, so a
source lookup would always be ErrNotFound and wrongly classify a live entry as
deleted — skipping it. Make targetPathToSourcePath report "unmappable" in
incremental mode; hasSourceNewerVersion already declines to skip when the source
path cannot be mapped.
Found in code review. Non-incremental sinks (filer.backup green->blue) are
unaffected.
* refactor(filer.backup): name the mtime param sourceMtimeNs; note ns overflow bound
- Rename the threaded sourceMtime parameter to sourceMtimeNs across the internal
replicate/fetch helpers so the unit is explicit (it only feeds
hasSourceNewerVersion, which compares in nanoseconds).
- Document that getEntryMtimeNs's int64 ns arithmetic is safe until ~year 2262.
No behavior change.
* fix(filer.backup): order same-second versions in the CreateEntry skip and update gates
The CreateEntry already-replicated short-circuit and chooseUpdateAction
still compared second-grained mtime, so a newer version written within
the same second could be skipped as already-replicated or overwritten by
an older same-second replay. Route both through getEntryMtimeNs, matching
the precision the chunk-replication path already uses.
* test(filer.backup): cover same-second update-action ordering
* docs(filer.backup): trim verbose comments to terse why
* fix(filer.backup): check supersession against the rename's new path
For a rename the filer sink updates in place (the delete+create branch is
skipped for sink name "filer"), so the corrupt-chunk supersession check
queried the pre-rename key. Its source-side ErrNotFound was read as
"superseded", silently advancing the checkpoint without applying the rename.
Map the incoming entry's new path (newParentPath/newEntry.Name) for both
update branches.
* fix(filer.backup): detect a deleted source even when the replayed mtime is epoch
hasSourceNewerVersion returned early when sourceMtimeNs <= 0, skipping the
source lookup, so a deleted entry with mtime 0 (a valid epoch timestamp) never
got the gone verdict and wedged on permanent retries. Always look up; gate only
the newer-mtime comparison on a valid replayed mtime.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
Problem: Re-storing object-lock default retention with Days left a previous Years extended attribute in place, so later loads could see both Days and stale Years.
Root cause: StoreObjectLockConfigurationInExtended only wrote period fields that were set on the new configuration and did not delete old Days or Years keys before writing the replacement rule.
Fix: Clear stored default-retention Days and Years keys before writing the current default retention period fields.
Reproduction: go test ./weed/s3api -run TestStoreObjectLockConfigurationClearsStaleYears -count=1 failed before the fix because the stale years key remained.
Validation: go test ./weed/s3api -run TestStoreObjectLockConfigurationClearsStaleYears -count=1; go test ./weed/s3api -count=1; git diff --check; git diff --cached --check
Co-authored-by: Codex <noreply@openai.com>
* fix(mongodb): merge URI auth fields with username/password override
SetAuth replaced the whole Credential parsed from the URI, dropping
AuthSource and AuthMechanism. Start from the URI-parsed Auth and only
override the username and password so credentials scoped to a specific
auth database keep working.
* fix(mongodb): set PasswordSet for explicit credentials
Required by GSSAPI auth when a password is supplied; ignored for other
mechanisms.
processExplicitDirectory appended a directory-key object as a version
without checking it against the prefix. A versioned listing descends
through ancestor markers to reach a deeper prefix, so every ancestor
(Veeam/, Veeam/Backup/, ...) leaked into Versions even though none of
them match the prefix - which makes Veeam's immutable repository scan
abort on an unexpected key. Guard on the prefix so only keys at or under
it surface, matching ListObjectsV2 and AWS.
* fix(shell): move files into existing destination directories
Problem: fs.mv /src/file /dst/dir treats an existing destination directory as a destination file path, so it renames the source to /dst/dir instead of moving it into /dst/dir/file.
Root cause: commandFsMv builds the destination LookupDirectoryEntryRequest with Directory and Name swapped, so the destination directory lookup misses.
Fix: Populate LookupDirectoryEntryRequest with Directory=destinationDir and Name=destinationName before deciding whether the destination is a directory.
Reproduction: env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/shell -run TestFsMvMovesIntoExistingDestinationDirectory -count=1
Validation: gofmt -w weed/shell/command_fs_mv.go weed/shell/command_fs_mv_test.go; git diff --check; git diff --cached --check; env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/shell -run TestFsMvMovesIntoExistingDestinationDirectory -count=1; env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/shell -count=1
* Update weed/shell/command_fs_mv_test.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* fix(seaweed-volume): stop EC shard deletion from phantom .dat on restart
On startup load_existing_volumes() scans .vif/.idx entries (not just
.dat). For distributed EC, a volume's .vif can be mirrored onto a disk
whose .ecx lives on a sibling disk, so the per-disk ecx check is false
and the loader falls through to Volume::new, which always creates the
.dat if missing -> a phantom 8-byte superblock stub. The store-level
prune_incomplete_ec_with_sibling_dat then treats that stub as the
authoritative source and deletes the real EC shards on sibling disks. Go
guards the same case (disk_location.go: 'Without this guard NewVolume
below would create a phantom empty .dat') but only same-disk.
Fix A (root cause): in load_existing_volumes, don't create a .dat during
load. Skip the entry when there is no local .dat AND the .vif does not
reference remote files -- remote-tiered volumes have no local .dat but
must still load via the remote path. Uses the robust check_dat_file_exists
helper so a transient stat error doesn't skip a real volume. New volumes
go through create_volume(). Covers the cross-disk .vif/.ecx split Go's
same-disk hasEcxFile() misses.
Fix B (defense in depth, Go + Rust): when the EC .vif records no source
size (dat_file_size==0), require the sibling .dat to be strictly larger
than a bare superblock, so an empty 8-byte stub can't pass the
credibility gate. Previously it fell back to SUPER_BLOCK_SIZE, which an
8-byte stub exactly meets.
Adds regression tests reproducing the cross-disk lone-.vif phantom and
the 8-byte stub gate; updates an existing prune test to use a real
collection so its .ecx lookup matches the loaders.
* fix(storage): don't create phantom .dat from lone .vif on Go volume load
Mirror Fix A on the Go side. loadExistingVolume scans .vif/.idx entries,
and for distributed EC a .vif can be mirrored onto a disk whose .ecx is
on a sibling disk. The same-disk hasEcxFile() guard does not fire there,
so the loader falls through to NewVolume(createDatIfMissing=true) and
writes an 8-byte phantom .dat, which the sibling-.dat prune then uses to
delete the real EC shards on sibling disks. Skip the entry when there is
no local .dat AND the .vif has no remote file (via MaybeLoadVolumeInfo);
remote-tiered volumes have no local .dat but must still load.
Adds TestLoneVifDoesNotCreatePhantomDat (fails without the guard) and
TestRemoteTier_DiskScanLoadsRemoteOnlyVolume (fails if the guard skips a
remote-only volume).
Problem: RandomUint64 generated eight random bytes but returned int32, truncating the value before mount file and directory handles converted it to uint64. This reduced handle entropy to 32 bits and produced sign-extended handle values.\n\nRoot cause: the helper cast BytesToUint64 to int32 and exposed int32 as its return type.\n\nFix: make RandomUint64 return uint64 and return the full BytesToUint64 result.\n\nReproduction: go test ./weed/util -run TestRandomUint64ReturnsUint64 -count=1 failed before the fix because RandomUint64() had kind int32.\n\nValidation: gofmt -w weed/util/bytes.go weed/util/bytes_test.go; git diff --check; go test ./weed/util -run TestRandomUint64ReturnsUint64 -count=1; go test ./weed/util -count=1; go test ./weed/mount -count=1; git diff --cached --check
Adds an "Export All (JSON)" button on the Cluster Volumes page that pulls
the whole cluster's volume list from the master in one call, a superset of
volume.list. Beyond the table columns it carries garbage and fullness
ratios, modified time, compact revision, remote tiering keys, per-disk
capacity counts, EC shard sizes with file/delete counts, and a cluster-wide
duplicate-volume-id scan. Honors the active collection filter. The existing
per-page CSV export stays as "Export Page".
Mini auto-sizes a few large volume slots, but the master pre-grows 7
volumes per new collection. Under a filer group each S3 bucket is its
own collection, so the first buckets claimed every slot and later
writes failed to assign a volume. Cap mini's volume_growth copy counts
to 1.
* fix(filer.sync): guard batched events against nil EventNotification
The server folds a backlog into one response: the first event in the
top-level fields, the rest in resp.Events, and the pipelined sender can
drain an idle heartbeat (nil EventNotification) into that tail. Only the
envelope got the freshness-signal guard, so a batched heartbeat reached
AddSyncJob and nil-derefed in IsEmpty while replaying a backlog buffered
during a peer outage.
Route every event, envelope and batched, through one handler that sends
freshness signals (nil heartbeat, empty marker) to OnIdleHeartbeat.
* fix(filer): guard MetaAggregator batched events against nil EventNotification
The peer subscription's envelope is nil-guarded but its batched tail was
not. The aggregator doesn't enable idle heartbeats today, so the server
can't fold a nil EventNotification into the batch yet, but make the two
loops consistent so it can't nil-deref if that changes.
fix: don't mangle filer paths with the OS separator on Windows
filepath.Dir/Join use the platform separator, so on Windows they rewrite
a forward-slash filer path like /buckets/x into \buckets\x. The mangled
value then goes into a filer RPC and operates on the wrong key, so the
op silently targets nothing.
The admin file browser hit this in New Folder (the entry landed under
\buckets\my-bucket and never showed up under /buckets/my-bucket), and
the same way in delete, view and properties. MQ topic retention and
consumer-offset listing, and the SFTP home dir plus create-permission
parent lookup, had the same bug.
Switch all of these to the path package, which always uses "/".
* fix(remote): reject short reads when caching remote objects
A short read from the remote (stale listing size, truncated or flaky
response) was silently zero-padded: the S3 and Azure clients pre-size
the buffer and discard the downloaded byte count, and the chunk is
recorded with the requested size. The cached file then matched the
expected size but its tail was NULL, and the entry was marked cached
so it never re-fetched.
Check the byte count against the requested size in both clients, and
add a backend-agnostic guard in FetchAndWriteNeedle. The cache now
fails loudly and the entry stays remote-only for a later retry.
* fix(remote): match S3 default modes when syncing remote metadata
Remote object listings carry no POSIX mode, so synced entries were
created with a hardcoded 0644. Against a SeaweedFS remote, whose S3
layer writes objects as 0660 and auto-creates directories as 0771
(0660|0111), the mounted copy ended up 0644/0755 and the permissions
visibly diverged from the source.
Default to the S3 modes instead (files 0660, directories 0771). The
filer derives parent-dir modes from the child as fileMode|0111, so
fixing the file default also brings the directories into line.
Directory mtimes still reflect sync time: S3 listings don't enumerate
directories, so the remote's directory timestamps aren't available.
TopicExists and getTopicConfFromCache negative-cached a topic for the full
30s TTL whenever a filer lookup failed for any reason, including timeouts.
A topic created earlier then looked gone until the TTL expired, and the
metadata auto-create path couldn't heal it (CreateTopic rejects an
already-persisted conf), so producers saw UNKNOWN_TOPIC_OR_PARTITION.
Only negative-cache on a definitive ErrNotFound; let transient errors fall
through and retry against the filer.
* fix(s3api): accept HTTP-date conditionals
Problem: Object conditional headers rejected valid HTTP-date values in RFC850 or ANSIC format for If-Modified-Since and If-Unmodified-Since.
Root cause: parseConditionalHeaders used time.Parse(time.RFC1123), accepting only one HTTP-date representation instead of the standard formats accepted by net/http.ParseTime.
Fix: Parse conditional date headers with http.ParseTime so RFC1123, RFC850, and ANSIC HTTP-date forms are accepted.
Reproduction: go test ./weed/s3api -run TestParseConditionalHeadersAcceptsHTTPDateFormats -count=1 failed before the fix with ErrInvalidRequest for RFC850 and ANSIC date values.
Validation: env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/s3api -run TestParseConditionalHeadersAcceptsHTTPDateFormats -count=1; env GOCACHE=/private/tmp/seaweedfs-go-cache go test ./weed/s3api -count=1; git diff --check; git diff --cached --check
* fix(s3api): accept HTTP-date copy-source conditionals
Mirror the put-path http.ParseTime switch onto the copy-source If-Modified-Since / If-Unmodified-Since headers, which still rejected valid RFC850 and ANSIC dates.
* fix(s3api): keep RFC1123 UTC-zone dates working alongside http.ParseTime
http.ParseTime rejects the "UTC" zone that Go clients emit via t.UTC().Format(time.RFC1123), which the old RFC1123 parser accepted. Add a parseHTTPDate helper that tries http.ParseTime first and falls back to RFC1123, so the put and copy-source conditional date headers accept the union of HTTP-date formats plus the UTC zone.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* feat(filer.backup): add -resetCheckpoint to force a fresh sync
filer.backup resumes from a per-sink offset persisted in the source filer's KV.
There was no first-class way to discard that checkpoint and re-run from the
beginning short of guessing a large -timeAgo, which also skips -initialSnapshot.
Add -resetCheckpoint: before reading the offset, write 0 for this sink so
getOffset returns 0, isFreshSync stays true, and -initialSnapshot re-runs a full
walk. Effective only when -timeAgo is 0.
The flag is cleared after the first successful reset: runFilerBackup retries
doFilerBackup forever on error, so leaving it set would re-zero the checkpoint
on every retry and never make forward progress after a transient failure. Later
retries resume from the persisted checkpoint instead.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(filer.backup): keep fresh-sync intent when offset read fails after reset
After -resetCheckpoint writes offset 0, a transient getOffset read-back error
flipped isFreshSync to false, which skipped the -initialSnapshot walk the reset
explicitly requested. Track that the reset happened this iteration and, on a
getOffset error, preserve isFreshSync=true in that case (the non-reset path
keeps treating a read error as "not fresh" to avoid re-walking on transients).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* refactor(filer.backup): skip offset read-back on reset instead of tracking a flag
Replace the didReset bool by branching: on -resetCheckpoint, clear the offset and
start fresh without reading it back (we just wrote 0, so the state is known);
otherwise read the offset as before. This drops the redundant getOffset RPC after
a reset and removes the read-back error case entirely, so no separate flag is
needed to preserve isFreshSync.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* filer.backup: -initialSnapshot re-seeds on every start; drop -resetCheckpoint
-initialSnapshot now walks the live tree whenever -timeAgo is 0, seeds the
destination, and overwrites the saved checkpoint, rather than running only on a
fresh sync. That re-seeds a reinitialized destination on its own, so the
separate -resetCheckpoint flag is gone.
The walk runs once per process: the in-memory flag is cleared after the
watermark is persisted, so the retry loop resumes from the persisted checkpoint
instead of re-walking on every transient error. A process restart re-walks, so
remove the flag once the backup is caught up.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* rust release: publish .md5 checksums alongside weed-volume binaries
The versioned rust volume release built and uploaded the tarballs/zips but
no checksum sidecars (the Go releases get .md5 automatically via
go-release-action; this workflow uses softprops/action-gh-release directly).
Generate an .md5 next to each asset (md5sum on linux/windows-bash, md5 -r on
macOS) and include them in the release/artifact uploads, so downloaders
(e.g. seaweed-up, which verifies md5 before installing weed-volume) can
check integrity. Covers linux amd64+arm64, darwin amd64+arm64, windows amd64.
* rust release: build large-disk and normal into separate target dirs
Both cargo builds wrote to target/<triple>/release/weed-volume, so the
second (normal, --no-default-features) overwrote the first, and the Package
step then copied that same binary into BOTH tarballs — the large-disk asset
actually shipped the normal binary. Build each variant into its own
--target-dir (target/large-disk and target/normal, both under target/ so the
existing cache still covers them) and copy each tarball's binary from its
own dir.
* admin/maintenance: reload in-flight tasks on startup instead of discarding
LoadTasksFromPersistence deleted all persisted task files on startup and
relied on the scanner to re-detect, so saved task state was never consumed
— the persistence was effectively write-only. Reload non-terminal tasks
(pending/assigned/in_progress) into the queue, resetting in-flight ones to
pending since their worker is gone after a restart (maintenance tasks are
idempotent). Terminal task files are dropped; the scanner still backfills
anything not persisted.
* address review: nil-guard reloaded tasks and SyncTask to ActiveTopology
- skip nil entries from LoadAllTaskStates (corrupted state)
- re-sync restored tasks with MaintenanceIntegration so ActiveTopology
(in-memory, empty on startup) knows about them; otherwise GetNextTask's
AssignTask rejects them as unknown and they never get assigned
* vacuum: compact a read-only volume when an explicit volumeId is given
The on-demand path no longer skips read-only volumes, so an operator can
reclaim a benignly read-only (full/oversized) volume without marking it
writable first. The background scan and all-volumes sweep still skip
read-only, where the flag usually signals an unhealthy disk.
* vacuum: copy locationList under lock for on-demand vacuum
The volumeId>0 path passed the live vid2location entry into the async
vacuum, where heartbeat-driven Register/UnRegister can mutate the slice
concurrently. Snapshot it under accessLock, matching the sweep path.
* ec.balance: verify shard(s) landed on the destination before deleting source
The EC balance task copied/mounted a shard to the destination and then
immediately unmounted+deleted it from the source, reporting success as soon
as the RPCs returned. A copy/mount can return OK while the shard isn't
actually registered/loadable on the destination, so deleting the source
then loses the shard (and the scanner re-issues the same move every cycle).
Add a verification step (VolumeEcShardsInfo via VerifyShardsAcrossServers,
the same check the EC encode task uses before deleting originals): if the
destination doesn't report every moved shard, fail the task and keep the
source so the move is retried instead of losing data.
* address review: use comma-ok when reading destination shard inventory
Problem: Default object-lock retention accepted an explicitly provided Years value of zero, even though a default retention period must be positive when present.
Root cause: validateDefaultRetention rejected zero Days but only rejected negative Years, leaving YearsSet with Years=0 as a successful validation path.
Fix: Treat an explicitly provided zero Years value as ErrInvalidRetentionPeriod, matching the existing Days validation.
Reproduction: go test ./weed/s3api -run TestValidateDefaultRetention -count=1 failed before the fix because the Zero years case returned nil.
Validation: go test ./weed/s3api -run TestValidateDefaultRetention -count=1; go test ./weed/s3api -count=1; git diff --check; git diff --cached --check
* ec placement: steer shards to less-loaded machines, not the lowest id
EC encode places every volume against one shared topology snapshot (it reserves the
shards it assigns so later volumes see reduced capacity), but node selection ranked
only by this volume's shard count and broke ties by sorted id. So the lowest-id
machine won the first shard of every volume and accumulated far more total shards
than the rest -- on a 6-machine cluster the first machines drifted to ~1.5x.
Rank eligible nodes by the machine's shards of this volume, then the machine's free
capacity, then the node's shards of this volume, then the node's free capacity. Free
capacity reflects the load already placed, so ties steer toward the least-loaded
machine instead of the lowest id, keeping total EC shards even across machines.
* test: ec.balance converges to even per-machine load from a skew
Starts machine 10.0.0.1 at 4 shards/volume and the rest at 2, then runs repeated worker-style capped passes; asserts convergence to an even per-machine total (reaches exactly even in ~13 rounds).
* reduce comments on the placement fix
Trim narration to the non-obvious why.
* test: assert convergence and count zero-shard machines
Seed the per-machine map with every host so a fully drained machine still registers, and fail explicitly if balance doesn't converge before the round cap.
admin: default -dataDir to "." so maintenance task state persists
Previously -dataDir defaulted to empty, so the admin ran maintenance in
memory only: task state was never saved and maintenance tasks (notably EC
balance/rebuild) were re-issued every scan cycle without converging,
churning EC shards (moves landed shards without their .ecx index, leaving
EC volumes unloadable/missing shards).
Default -dataDir to "." (the process working directory, which under the
standard systemd unit is the admin's data dir) so state persists out of
the box.
* admin/topology: carry the volume server address on DiskInfo
The planning DiskInfo exposed only the node id, which can be an opaque label rather than ip:port. Record the address too so callers can resolve the physical machine a disk sits on.
* ec.balance: spread a volume's shards across machines, not just nodes
Volume servers sharing a host are one fault domain, but the within-rack spread treated them as independent nodes, so one box could end up holding more shards of a volume than EC can afford to lose. Add a machine (host) tier between rack and node: the within-rack pass spreads each volume across machines, and the global load phase no longer re-concentrates a volume onto a machine it already sits on. Host defaults to the node id, so clusters with one server per host are unchanged.
* ec placement: prefer machines holding fewer of a volume's shards
EC allocation and repair picked the least-loaded node in a rack with no regard for which physical machine it sits on, so a volume's shards could pile onto several servers of one box. Rank candidate nodes by their machine's shard count first, then the node's own. The machine is derived from the volume server address carried on DiskInfo, falling back to the node id, matching how the balancer resolves it.
* volume.balance: don't move a replica onto a machine already holding one
isGoodMove only rejected a move onto the same data node, so two replicas could land on two volume servers of one box and a single machine failure would lose both. Reject a target whose host already holds another replica of the volume. Best-effort: balancing simply skips and tries the next target.
* volume allocation: spread same-rack replicas across machines
PickNodesByWeight filled the same-rack replica picks by weight alone, so replicas could co-locate on one box. Prefer candidates on not-yet-used hosts, falling back when too few distinct machines exist. Data-center and rack tiers have no host, so their ordering is unchanged.
* ec.balance: harden machine spread against re-concentration and capped machines
Two cases where the machine-aware spread could still leave a volume badly placed:
- The global load phase could move a shard of a volume onto a machine that
already held it, raising that machine's count and undoing the within-rack
spread (a 4/4/3/3 layout could become 3/5/3/3, past parity for 10+4). Limit
the load-only fallback to same-machine moves, which leave a machine's count
unchanged; cross-machine concentration is no longer allowed for load alone.
- The within-rack spread chose a destination machine by free slots alone, so if
that machine's only nodes were already at the SameRackCount cap it skipped the
move instead of trying another machine. Require a machine to have a node that
can actually take the shard before selecting it.
* reduce comments across the machine-affinity change
Trim narration down to the non-obvious why; one terse line where a block was overkill.
* ec.balance: gate machine spread on fault-tolerance feasibility
Spreading a volume evenly across machines only helps when there are enough that
each can stay within EC's parity tolerance (numMachines >= ceil(total/parity)).
With fewer -- or wildly unequal -- machines it can't make a machine loss
survivable anyway, and forcing it fights capacity: e.g. a cluster of 12 volume
servers on one host and 2 on another would have half of every volume crammed onto
the 2-server box. So spread across machines only when it's achievable; otherwise
fall back to per-node spread and let capacity/global balancing decide.
The global load phase applies the same test: it protects a volume's machine spread
(no cross-machine move that raises a machine's count past the source's) only where
that spread is achievable, so heterogeneous clusters still level by fullness.
* ec.balance worker: group servers by host when planning
The worker built its planner topology without recording each server's host, so
automated ec.balance treated ports on one machine as independent nodes and could
concentrate a volume's shards on one physical box. Set the host from the volume
server address, matching the shell path.
* volume.balance worker: don't move a replica onto a machine holding one
The worker compared only node ids, and the replica map dropped the server address,
so it could move replicas onto different ports of one machine. Carry the host on
ReplicaLocation (from the server address) and reject a target whose host already
holds another replica of the volume. Best-effort, matching the shell.
* ec.balance: judge machine-spread feasibility by the rack's shards
The within-rack and global feasibility checks compared the whole volume's shard
count against a rack's machine count, so a rack holding only part of a volume after
cross-rack spreading -- e.g. 7 of a 10+4 volume across 2 machines -- was wrongly
judged infeasible and fell back to node spread, which could pile 6 shards onto one
host, past parity. Gate on the rack's own shard count of the volume instead.
* ec.balance: spread a volume's shards across machines by combined count
EC recovers from any loss within parity regardless of shard type, so what bounds a
machine's exposure is its total shards of the volume, not data and parity
separately. Spreading the two independently let each type's remainder land on the
same machine -- ceil(d/M)+ceil(p/M) can exceed ceil(total/M), e.g. a 5/3 split where
4/4 was achievable, past parity. Balance the combined count in one pass; disk-level
data/parity anti-affinity stays in pickBestDiskOnNode.
* ec.balance: don't let the imbalance threshold skip an over-parity machine
The within-rack spread gated on relative skew ((max-min)/avg > threshold), so a
worker threshold of 0.5 skipped an exactly-50%-skewed layout like 5/4/3 for a 10+4
volume, leaving 5 shards -- past parity -- on one machine. The even cap
(ceil(shards/groups)) is the real bound and the move loop already sheds only what
exceeds it, so drop the threshold gate from the within-rack phase (machine and node):
a balanced rack stays a no-op while any over-cap machine is always fixed.
* ec.balance: keep the imbalance threshold for the node fallback
Dropping the threshold from the whole within-rack phase made the node fallback too
eager: it runs only when machine fault tolerance is unachievable, so it is cosmetic
load distribution that should defer to the global utilization phase. Without the
gate it would, for a one-server-per-host 6/4 split at threshold 0.5, schedule a count
move that worsens utilization balance. Restore the threshold there; machine spreading
keeps bypassing it, since that bound is durability, not cosmetic skew.
* fix(s3api): require space in v2 auth prefix
Problem: Signature V2 Authorization headers with a malformed algorithm token such as AWSX... are accepted as if they were AWS ... headers.
Root cause: validateV2AuthHeader checks HasPrefix("AWS") but then slices past an assumed trailing space, so an extra character after AWS is skipped and the rest is parsed as credentials.
Fix: Require the Authorization header to start with the exact AWS plus space prefix before parsing fields.
Reproduction: go test ./weed/s3api -run 'TestValidateV2AuthHeader/algorithm_prefix_without_space|TestDoesSignV2Match/malformed_auth_-_no_space_after_AWS' -count=1 fails before the fix because AWSXAKIA... is accepted.
Validation: go test ./weed/s3api -run 'TestValidateV2AuthHeader/algorithm_prefix_without_space|TestDoesSignV2Match/malformed_auth_-_no_space_after_AWS' -count=1; go test ./weed/s3api -count=1; git diff --check; git diff --cached --check
* Update weed/s3api/auth_signature_v2.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
---------
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
Problem: Multipart uploads where the first part was a form field and a later part contained the file used the first part's Content-Type for the file metadata.
Root cause: After finding a later part with a filename, parseUpload copied data and MD5 from part2 but read Content-Type from the original part variable.
Fix: Read Content-Type from the discovered file part.
Reproduction: go test ./weed/storage/needle -run TestParseUploadUsesDiscoveredFilePartContentType -count=1 failed before the fix because the parsed MIME type was text/plain instead of application/x-seaweed-test.
Validation: go test ./weed/storage/needle -run TestParseUploadUsesDiscoveredFilePartContentType -count=1; go test ./weed/storage/needle -count=1; git diff --check; git diff --cached --check
VidCache.cache was a []VidInfo indexed directly by volume id, so caching
one volume with a large id grew the backing array to that many entries
(each 48 bytes), allocating a zeroed slot for every unused id below it. A
single id of 32M cost ~1.5GB resident, plus geometric realloc churn as the
append loop doubled the array.
Use map[uint32]VidInfo so memory scales with the number of volumes actually
cached rather than the largest id seen. Parse ids with ParseUint(.,32) so
values outside the uint32 volume-id range are rejected instead of silently
wrapping into a key.
* s3: set outbound bind IP before the first filer dial
Standalone weed s3 dialed the filer for GetFilerConfiguration before
SetOutboundLocalIP ran, so that gRPC conn was created with the stock
dialer and no source address. gRPC caches conns by address and reuses
the original dialer on reconnect, so the s3->filer connection kept
leaving from the OS-chosen source for the life of the process even
after the bind IP was set a moment later.
* grpc: install the outbound-bind dialer unconditionally
The dialer was installed only when OutboundLocalAddr was already set at
GrpcDial time, baking the source-address decision into the cached conn,
so a conn dialed before the bind IP was configured never bound.
Install the context dialer always and decide per dial: bind through
OutboundDialContext once a source is set, otherwise fall back to the
stock net.Dialer so default deployments keep gRPC's dial timeout and
keepalive behavior. The bind now applies on the next reconnect
regardless of ordering, matching the HTTP transport's unconditional
DialContext.
- Different-users bucket test: use getNewBucketName() so the bucket carries the
tracked prefix and run id and gets swept if the test leaks, instead of an
untracked name.
- Makefile: clarify that '.' matches the opt-in stress tests but they self-skip
without ENABLE_STRESS_TESTS, so they don't execute in the default run.
- Versioned list test: guard the Object.Size dereference with require.NotNil.
A suspended-versioning DELETE was recorded with createDeleteMarker, which mints a
fresh real version id each time, so repeated suspended deletes piled up delete
markers instead of overwriting a single null marker as S3 specifies. Record the
suspended delete as a 'null' marker with a fixed file name (v_null) and point the
latest-version pointer at it explicitly; putSuspendedVersioningObject's existing
null-version cleanup removes it on the next suspended PUT, so the object undeletes
cleanly and at most one null marker exists. Enabled-versioning deletes are
unchanged (still distinct historical markers).
Update TestSuspendedVersioningDeleteBehavior to the AWS-correct counts: one null
marker after a suspended delete, and the null marker plus one real marker after a
re-enabled delete.
* test(s3): correct bucket-recreate expectations and cover the different-owner case
A same-owner CreateBucket on an existing bucket returns BucketAlreadyOwnedByYou
(idempotent recreate); the suite expected BucketAlreadyExists, which only applies
when the name is owned by someone else. Fix the same-owner cases (plain and
Object-Lock) and implement the previously-skipped different-owner test, which now
exercises the BucketAlreadyExists path via a second identity.
* test(s3): assert the deletion invariant for suspended-versioning delete
A suspended-versioning DELETE removes the null version and records a delete marker
so the object reads as deleted; the test expected no marker, which would let an
older version resurface. Assert that a marker is recorded (and read DeleteMarker
through aws.ToBool) rather than an exact count, so it holds whether or not the
suspended-marker id/dedup is later collapsed to AWS's single null marker.
* test(s3): run the whole versioning suite by default
TEST_PATTERN was TestVersioning, which left bucket-creation, suspended-delete and
directory/version-listing tests ungated. Default to '.' so every test runs; opt-in
stress tests self-skip without ENABLE_STRESS_TESTS and keep their own targets.
TestVersionedObjectListBehavior compared int64 against listedObject.Size,
which is *int64, so the assertion always failed on a type mismatch once
reached. Dereference it (and in the log line).
ListObjectVersions gated explicit directory objects on Mime ==
FolderMimeType, but an SDK PutObject of "dir/" carries a default
Content-Type (e.g. application/octet-stream), so those directory keys
were dropped from the version listing while ListObjectsV2 - which keys
off IsDirectoryKeyObject (any non-empty mime) - still showed them. Use
the same IsDirectoryKeyObject check so the two listings agree.
The directory test's storage-class assertion compared an ObjectStorageClass
constant against ObjectVersion.StorageClass (ObjectVersionStorageClass);
the values matched but the SDK enum types did not, so it only surfaced
once the directories started appearing. Use the matching constant.
* s3: rescan .versions when the cached latest pointer is missing on a list
ListObjectsV2 resolves each versioned object's current version from the
latest-version pointer cached on the .versions directory entry. When that
pointer is absent on the filer serving the list, the object was dropped
from the listing. Fall back to a read-only rescan of .versions/ to pick
the newest version - the version files are present locally even when the
cached pointer is not - so the object still lists. This mirrors the read
path's recoverLatestVersionWithoutPointer; the scan loop is shared.
Read-only by design: a list can touch many objects, so it does not persist
a pointer.
* s3: copy scanned Extended before stamping the version id
applyRecomputeLatest wrote the .versions latest-version pointer and the
demoted prior version's stamp through UpdateEntry without a following
NotifyUpdateEvent, so neither change entered the metadata log. Across
filers the pointer then lived only on whichever filer ran the mutation,
and ListObjects served by any other filer dropped those objects from a
versioned bucket. Emit the events the way PATCH_EXTENDED already does,
keeping a pre-update image for the notification diff.
Stamping an Expiration.Days rule as a volume TTL at write time bakes an
irreversible TTL into the object: removing or lengthening the rule later
can't un-expire it, unlike worker-driven expiration. The metadata-only
delete it enables also skips per-chunk DeleteFile, so dead bytes linger in
a not-yet-expired TTL volume with no deleted-byte accounting until the
whole volume ages out.
Gate the resolver on a per-bucket flag, off by default; toggle with the
s3.bucket.lifecycle.fastpath shell command. Default writes take the worker
path: real deletes that honor current policy and let vacuum reclaim space.
* fix(helm): deduplicate all-in-one extra environment variables
The all-in-one Deployment looped global.seaweedfs.extraEnvironmentVars and
allInOne.extraEnvironmentVars in two separate ranges, so any key present in
both maps was emitted as two env entries with conflicting values. It also
computed a merged map for the cluster-default lookup but never used it for
the env loop.
Use the existing seaweedfs.mergeExtraEnvironmentVars helper (as the filer,
master and s3 templates already do) so a key set in both maps renders once
with the component value taking precedence, and add a chart-CI render
assertion covering it.
Assisted-By: Claude <noreply@anthropic.com>
Signed-off-by: Aleksei Sviridkin <f@lex.la>
* ci(helm): drop checkmark glyphs from chart test output
---------
Signed-off-by: Aleksei Sviridkin <f@lex.la>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(helm): suspend bucket versioning for YAML bool false
createBuckets[].versioning accepts both a YAML bool and a string. The
string branch maps "false"/"disable"/"suspended" to Suspended, but the
bool branch only handled true (Enabled) and left false as a silent no-op.
The same logical value therefore behaved differently depending on its
YAML type: `versioning: false` did nothing while `versioning: "false"`
suspended the bucket.
Mirror the string behaviour in the bool branch so bool false suspends the
bucket, and add a chart-CI render assertion covering it.
Assisted-By: Claude <noreply@anthropic.com>
Signed-off-by: Aleksei Sviridkin <f@lex.la>
* ci(helm): trim versioning regression-test comment
* chart: document bool false for createBuckets versioning
---------
Signed-off-by: Aleksei Sviridkin <f@lex.la>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* ip.bind: bind outbound connections to the configured address
-ip.bind only governed listeners; outbound gRPC and HTTP connections let
the OS pick the source IP, which may not even be able to reach the
target. Mirror the bind address into a process-global source address and
apply it to outbound TCP dials: the gRPC context dialer, the per-client
HTTP transports, and the default transport. Loopback targets and unix
sockets keep the OS-chosen source so same-host traffic still works.
* ip.bind: first-write-wins source IP, skip on address-family mismatch
Make SetOutboundLocalIP first-write-wins so a `weed server` component's own
bind setting (run in its goroutine) can't clobber the process-wide source
address the top-level -ip.bind already established for the other components.
Skip source binding when the target is a literal IP of a different family
than the bind address, since forcing a mismatched source fails the dial.
* fix(s3api): standardize ETag calculation across S3 API handlers
* s3: make copyEntryETag nil-safe
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* master: grow rack-spanning volumes once per DC, capped at copy_N
The periodic rack-aware growth scan grew once per rack. For rack-spanning
replication (DiffRackCount > 0) a single logical volume already covers every
rack the placement needs, so a crowded volume made every rack report
should-grow and the scan created racks×step too many volumes: with "010"
across two racks that is 2 racks x step 2 = 4 logical (8 physical) volumes.
Plan one DC-wide grow for rack-spanning replication, and cap the per-event
step at master.volume_growth.copy_N so lowering it reduces periodic growth.
* master: distribute lastGrowCount evenly across uneven DCs
The non-rack-spanning grow divisor used the current DC's rack count, so DCs
with different rack counts each over-grew. Sum every rack up front and divide
lastGrowCount by that global count instead.
* security: reload JWT signing keys on SIGHUP
Signing keys were read once in the server constructors and never
refreshed. After a key rotation (Secret update, divergent reads) the
in-memory key stayed stale and every request kept failing "wrong jwt"
until the affected process was restarted.
Add Guard.UpdateSigningKeys and call it from the master, volume and
filer reload paths and the s3 reload hook, next to the existing
whitelist refresh. Make the global chunk-read JWT cache reloadable via
an atomic swap, and register the master's Reload with grace.OnReload --
it was never wired, so the master ignored SIGHUP entirely.
Mirror the same refresh in the Rust volume server's SIGHUP handler.
* security: swap signing keys behind an atomic pointer
Addresses review feedback on the in-place key swap: SigningKey is a
[]byte, so reassigning the Guard fields while a request handler reads
them is a data race that can tear the multi-word slice header and read
out of bounds.
Hold the four signing-key fields in an immutable signingConfig snapshot
behind atomic.Pointer; UpdateSigningKeys swaps the whole pointer, so a
reader sees either the old keys or the new ones. Reads go through new
SigningKey/ExpiresAfterSec/ReadSigningKey/ReadExpiresAfterSec accessors.
The Rust guard is already safe: every read and the SIGHUP write go
through the shared RwLock<Guard>.
* security: fold whitelist + auth state into the atomic snapshot
Review follow-up. UpdateSigningKeys still wrote isWriteActive while the
request path read it (and the whitelist maps) unsynchronized, so a SIGHUP
under load could expose an inconsistent mix of activation bits and
whitelist contents.
Move all hot-reloadable Guard state -- keys, expirations, whitelist, and
the activation flags -- into a single immutable guardState swapped behind
one atomic.Pointer. The Update* methods take a small mutex to serialize
the read-modify-write; readers stay lock-free. The concurrency test now
also rotates the whitelist and probes IsWhiteListed under -race.
Also read each signing key once per branch in the volume/filer JWT auth
checks, so a reload landing mid-check can't take the allow-fast-path
after auth was enabled or verify against a different key than the branch
saw.
* fix(master): advance maxVolumeId when registering EC shards
After EC encoding the original normal volume is deleted, so a
high-numbered volume can exist only as EC shards. Only regular volumes
advanced maxVolumeId (Disk.doAddOrUpdateVolume), so a master that
rebuilt its state from heartbeats (raft state not resumed) undercounted
the max and NextVolumeId could re-issue an id that EC shards still
occupy. A new volume then gets created on top of the EC volume id; new
writes land on it, but reads route to the old EC shards whose .ecx never
held the new needle, returning 404 and corrupting that object.
Advance maxVolumeId when EC shards are registered, mirroring the
regular-volume path. RegisterEcShards is the chokepoint both the full
and incremental heartbeat sync paths funnel through.
* test: cover incremental heartbeat path for EC maxVolumeId
Both SyncDataNodeEcShards and IncrementalSyncDataNodeEcShards funnel
through RegisterEcShards; assert the invariant on the incremental path
too.
* s3: return BucketAlreadyOwnedByYou when recreating your own bucket
PutBucket returned BucketAlreadyExists for every existing bucket, even
when the caller already owns it, so idempotent re-creation (e.g. a
container that creates its bucket on startup) couldn't tell "someone
else took the name" from "it's already mine".
Recreating a bucket you own now returns BucketAlreadyOwnedByYou, unless
the request conflicts with the existing bucket: a different Object Lock
setting, or an ACL on the request or the existing bucket. To detect the
latter, a requested non-default canned/grant ACL is now persisted on
creation instead of being dropped.
* s3: fail PutBucket when the existing bucket's config can't be read
When a bucket already exists, an unreadable config left the recreate
defaulting to BucketAlreadyOwnedByYou, masking the backend error and
possibly accepting a conflicting recreate (Object Lock / ACL unknown).
Surface the read error instead.
* s3: return the stored bucket ACL from GetBucketAcl
GetBucketAcl always returned the owner's default full-control grant and
ignored any stored ACL, so a bucket created with a canned ACL or one set
via PutBucketAcl never read back correctly. Decode the stored grants
instead, sharing one grants-to-XML helper with the object ACL handler.
The shared helper also emits each grantee's real xsi:type (e.g. Group for
public-read) instead of a hardcoded CanonicalUser, so group grants read
back correctly for both bucket and object ACLs.
* s3: resolve the right already-exists error on the concurrent-create race
When two requests create the same bucket at once, the loser's mkdir
fails and the handler fell back to a flat BucketAlreadyExists, bypassing
the same-owner idempotency check. Route both the pre-check and the race
fallback through one existingBucketError helper so a same-owner recreate
still gets BucketAlreadyOwnedByYou.
* s3: record the bucket owner's account id at creation
setBucketOwner only stored the creating identity name, so the canonical
account id wasn't available later. Persist it under ExtAmzOwnerKey too,
the same field PutBucketAcl writes, so the bucket owner can be reported
independently of whoever reads it.
* s3: report the bucket owner from GetBucketAcl, not the caller
GetBucketAcl built the ACL Owner from the caller's account header, so an
admin or cross-account read returned the wrong owner. Use the owner
persisted on the bucket, falling back to the caller only when none is
recorded.
* mysql: keep S3 list order byte-lexicographic regardless of name column collation
ORDER BY name and the name > ? pagination predicate follow the column
collation, so a case-insensitive filemeta.name (e.g. utf8mb3_general_ci)
returns S3 keys out of byte order and breaks clients that merge two sorted
listings.
Detect the live name collation at startup; only when it isn't binary, wrap
the list comparison, prefix, and ORDER BY in BINARY name so order and
pagination stay consistent. Correctly configured utf8mb4_bin tables keep
their indexed range scan unchanged, and the operator gets a warning to
convert the column.
* postgres: keep S3 list order byte-lexicographic regardless of name column collation
ORDER BY name and the name > $n pagination predicate follow the column or
database collation, so a locale-aware filemeta.name (e.g. the en_US.UTF-8
database default) returns S3 keys out of byte order and breaks clients that
merge two sorted listings.
Detect the live name collation at startup; only when it isn't byte-ordered,
wrap the list comparison, prefix, and ORDER BY in COLLATE "C" so order and
pagination stay consistent. A byte-ordered (C/POSIX/C.UTF-8) column keeps its
indexed range scan unchanged, and the operator gets a warning to declare the
column COLLATE "C".
* filer: stream persisted log files when serving metadata subscriptions
readFileEntries buffered every LogEntry of a whole log file into memory
before returning them one by one, making a subscription read O(entries in
one log file) instead of O(one entry). On a filer with large per-entry
metadata, many concurrent SubscribeMetadata streams each loading a full
log file exhausted memory.
Keep a current LogFileIterator and return one entry at a time, advancing
files as each is exhausted. The deleted-volume skip is preserved.
* filer: close the log file iterator on read errors too
A genuine read error returned early without closing the current
LogFileIterator, leaving its ChunkStreamReader alive until GC. Close on
every exit path and propagate only a real error.
* filer: close persisted-log iterators when a subscription stops early
The streaming iterator keeps a log file reader open across calls, so a
subscription that returns before EOF (early stop, cancellation) left the
reader alive until GC. Add idempotent Close on LogFileQueueIterator and
OrderedLogVisitor, and have ReadPersistedLogBuffer wait for the readahead
goroutine and close the visitor on the way out.
* fix: log meta backup offset errors
* fix: log meta backup offset errors
* fix: exit on meta backup offset errors
Exit with a non-zero status when the initial metadata backup offset cannot be persisted.
Classify offset-read failures during streaming so the backup process exits instead of retrying forever, allowing supervisors to restart and bootstrap from a missing checkpoint.
* meta backup: read offset in the loop, drop offset error type
Reading the saved offset inside the retry loop makes an offset read
failure a clean exit and a stream error a retry, without a typed error
to tell them apart. streamMetadataBackup now takes the start time.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* s3: keep dynamic IAM live when -iam.config is set
-iam.config was treated like a static -config identity file: it set
useStaticConfig, which makes the filer metadata subscription skip
reloads. Identities and policies created at runtime (the IAM gRPC API)
then never took effect, so advanced IAM (OIDC/STS) and dynamic IAM were
mutually exclusive.
Gate useStaticConfig on whether inline identities were actually loaded.
An OIDC/STS-only config carries none, so it keeps the dynamic credential
store live; a -config identity file still freezes its identities as
before.
* s3: mark static identities on config reload too
A -config reload (grace.OnReload) re-reads the file, but only the startup
path marked its identities static, so identities added to the file and
reloaded were left unprotected from dynamic filer updates. Move the
marking into loadS3ApiConfigurationFromFile and make it additive and
scoped to the file's identities, so a reload protects newly added ones
without freezing dynamic filer-managed identities.
* s3: sync reloaded static identities into the credential manager
After marking a (re)loaded config file's identities static, push the
updated set into the credential manager so reloaded identities still
appear in listings and survive later dynamic merges. Centralize the sync
in loadS3ApiConfigurationFromFile and drop the now-redundant call in the
reload hook.
2026-06-03 23:28:25 -07:00
Fabian HardtGitHubgemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>Chris Lu
* sftpd: support SSH user certificates signed by a trusted CA
Adds a new "certificate" auth method to weed sftp. When enabled, the server
loads trusted CA public keys from -trustedUserCAKeysFile (OpenSSH
authorized_keys format, one or more keys) and accepts only ssh.Certificate
blobs of type UserCert on the public-key channel. Validation uses
ssh.CertChecker: CA signature, ValidAfter/ValidBefore, non-empty
ValidPrincipals and SSH login user must appear in ValidPrincipals. The
authenticated user must exist in the user store; home dir and permissions
resolve as before.
Behaviour mirrors MinIO's --sftp=trusted-user-ca-key and OpenSSH's
TrustedUserCAKeys: when certificate auth is active, plain (non-cert) public
keys are rejected even if "publickey" is also listed. Default authMethods
remain "password,publickey", so existing deployments are unaffected.
* Update weed/sftpd/auth/certificate.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* sftpd: address review feedback on certificate auth
- Pre-marshal trusted CA public keys in IsUserAuthority instead of
re-marshaling on every authentication attempt (gemini-code-assist).
- Differentiate user-not-found from underlying store errors via
errors.As(*user.UserNotFoundError) so backend/read failures are no
longer reported as bad credentials (coderabbitai).
- Fix the corresponding sanity check in the missing-file test to use
errors.As instead of errors.Is (UserNotFoundError has no Is method,
so the previous check never matched) (coderabbitai).
* sftpd: register trustedUserCAKeysFile flag in filer and server commands
The new field on SftpOptions is dereferenced unconditionally in
resolvePaths(), but only the standalone `weed sftp` command was wiring
its flag. `weed filer` and `weed server` both embed an SftpOptions value
and call resolvePaths() on it, so they hit a nil pointer dereference at
startup.
Register `-sftp.trustedUserCAKeysFile` in both commands and update the
-sftp.authMethods help text to mention the new "certificate" method.
Fixes the SFTP Integration Tests CI failure on this PR.
* helm: expose SFTP certificate auth in the SeaweedFS chart
Adds Helm-chart support for the new SSH user-certificate auth method:
- values.yaml (sftp:) gains `trustedUserCAKeys` (inline OpenSSH
authorized_keys-format CA public keys) and `existingCAKeysSecret`
(reference an externally managed Secret). Same pair added under
allInOne.sftp with a null default that falls back to the top-level
sftp.* setting.
- New template templates/sftp/sftp-ca-secret.yaml renders a
chart-managed Secret <release>-sftp-ca-secret with `ca_user.pub`,
but only when SFTP is enabled, "certificate" is in authMethods,
inline keys are provided, and no existingCAKeysSecret is set.
- templates/sftp/sftp-deployment.yaml and the all-in-one deployment
template add `-trustedUserCAKeysFile=/etc/sw/sftp_ca/ca_user.pub`
to the weed sftp command, mount the CA secret at /etc/sw/sftp_ca
and add the corresponding volume. All cert-auth bits are guarded
by `contains "certificate" authMethods` so existing users see no
change.
- authMethods help text updated to mention "certificate".
Verified end-to-end on a local k3d cluster: cert login succeeds,
plain-pubkey login is rejected with "public key without certificate
not allowed".
* helm: fail render when SFTP certificate auth lacks CA keys
When certificate is in authMethods but neither trustedUserCAKeys nor
existingCAKeysSecret is set, the deployment mounted a secret that the
chart never renders, leaving the pod stuck on a missing volume. Fail at
template time with a clear message instead.
* sftpd: fix stale auth-method list in SFTPServiceOptions comment
keyboard-interactive was never implemented; certificate is the new
supported method. Match the CLI help text.
* sftpd: test Manager wiring of certificate vs public-key channel
Cover the channel takeover at the Manager level: certificate auth
displaces plain public-key auth when both are enabled, public-key auth
stays put otherwise, and enabling certificate without a CA file errors.
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* filer: bound TraverseBfsMetadata memory by queuing directory paths
The BFS enqueued every entry, so it held the whole subtree in memory
including each file's chunk list. A filer serving a peer's first-time
bootstrap traversal of a large tree could exhaust memory and get killed.
Stream each entry as it is visited and queue only directory paths to
descend into. Memory is now bounded by the number of directories rather
than the entire tree, and the streamed output order is unchanged.
* filer: match excluded prefixes on path-component boundaries
Only treat an excluded prefix as a match when it ends at a path
boundary, so excluding /a/b does not also drop a sibling like /a/bc.
Short-circuit the trie walk on the first real match.
Blanking preferred kept route-by-key reads from dialing a flagged owner first,
but withFilerClientFailover always re-adds the current filer, so when the owner
is the gateway's current filer it stayed in the candidate list and got dialed
anyway. Treat a recently-unreachable filer as unhealthy in the health partition
so it is deferred to the last-resort tail instead of tried before healthy
replicas; preferred is still tried first, and a live owner is unaffected.
* s3: route object reads to the key's owner filer
Writes already route by key to the owner filer on the lock ring, where the
entry is created. Reads went to the gateway's local filer and treated its
NotFound as authoritative, so a GET on one gateway could miss an object
another gateway had just written until the filers' metadata replication
caught up.
Resolve an object's entry from the key's owner first, failing over to the
gateway's filer set only on transport errors. An owner NotFound stays
authoritative: no fan-out across filers, and no resurrecting a peer's
not-yet-replicated tombstone, so a delete routed to the owner is visible at
once and a genuine miss costs one lookup. Keys owned by the local filer are
unchanged. Objects written through the non-routed lock path land on a
gateway's local filer, so they can still read as absent on the owner until
they replicate.
withFilerClientFailover takes a preferred start filer; the object-entry
reads pass the owner, every other caller passes "" and keeps the
current-filer fast path.
* s3: consult the prior owner on a rebalance-window read miss
Owner-first reads route a key to its current ring owner. When a filer joins,
~1/N of keys reassign to it, and the new owner may not have replicated a
just-moved key yet, so an owner NotFound would surface a transient 404 for an
object that already exists elsewhere.
Retain the previous ring on the gateway's LockClient for a cooling-off window
(PriorOwnerForKey, mirroring the master's LockRing.PriorOwner) and, on the
owner's NotFound, probe the key's previous owner once before treating the miss
as final. The probe is scoped to keys whose ownership actually moved and only
within the window, so steady-state reads are untouched.
This trades the transient scale-up 404 for a transient stale read if a delete
routed to the new owner races the same window — the same authoritative-NotFound
tradeoff, narrowed to the rebalance.
* s3: try healthy filers before unhealthy ones on failover
The candidate list probed its first entry (usually the current filer)
unconditionally, so a health-flagged current filer cost a transport timeout on
every ordinary call before failover reached a replica. Partition candidates into
healthy and unhealthy, keep priority within each, and fall back to unhealthy
ones only when all healthy ones fail.
* reduce comments on the routed read and lock client paths
* s3: skip a recently-unreachable owner on route-by-key reads
The gateway's filer health tracking no-ops for an owner outside the static
-filer list, so during a sustained owner outage every route-by-key read
re-dials the dead owner before failing over. Flag an owner whose owner-first
read hit a transport error and skip it (read local-first) for a short TTL, so
reads pay one dead dial per TTL instead of one per request; the flag expires so
owner-first reads resume once the owner or the ring recovers.
* s3: always try the preferred owner first, health-order only the rest
The healthy/unhealthy partition also demoted a health-flagged preferred owner
behind healthy replicas, so a replica's authoritative NotFound could mask a
write that had only reached the owner — the read-after-write race this routing
exists to close. Pull preferred out of the partition and keep it first; the
recently-unreachable gate already steers reads away from a genuinely dead owner.
* fix(iam): return a valid user ARN from CreateUser and GetUser
The terraform aws provider 6.41 reads a user back after creating it and
blocks until GetUser returns a value that passes arn.IsARN. We only set
UserName, so the ARN was empty and apply hung until the 2m timeout.
Populate Arn (and Path) via a shared iam.NewUser helper in both the
embedded and standalone IAM handlers.
* fix(iam): use the userName parameter directly in NewUser
Drop the redundant local copy; the value parameter is already function-local.
* fix(iam): return full user objects with ARNs from GetGroup
GetGroup listed members with only UserName set. Build them via the shared
NewUser helper so group members carry a valid Arn and Path like the other
user responses, in both the embedded and standalone IAM handlers.
ReadFromBuffer and HasData() take the read lock separately, so a write
that lands between them can make a subscriber which just read a
momentarily empty buffer return ResumeFromDiskError even though the data
is now servable from memory. Re-read under a fresh lock and only bail
when the position is genuinely behind the in-memory window (flushed to
disk); otherwise loop back and read it.
* fix(iam): implement CreatePolicyVersion for managed policies
The AWS Terraform provider updates a managed policy in place via
CreatePolicyVersion, which returned 501 NotImplemented and broke
terraform apply on any policy change.
Implement CreatePolicyVersion (plus ListPolicyVersions, GetPolicyVersion
and DeletePolicyVersion) on both the standalone IAM server and the
embedded S3 IAM API. Managed policies keep a single current document, so
each is modeled as one default version "v1": CreatePolicyVersion replaces
the document, List/GetPolicyVersion expose it, and DeletePolicyVersion
rejects deleting the default. GetPolicy now reports DefaultVersionId so
the provider's read can fetch the document. The standalone path also
refreshes the cached Identity.Actions of every identity the policy is
attached to so the new document takes effect.
* fix(iam): reject CreatePolicyVersion unless SetAsDefault=true
With a single always-default managed-policy version, a request with
SetAsDefault=false (or omitted) would stage a non-default version on AWS
but here silently replaced the active document. Reject it on both the
standalone and embedded paths.
Isolate the new policy-version tests from the shared package fixtures so
they stay order-independent, and assert IsDefaultVersion on the response.
The username-isolation policy denied s3:ListBucket through an object-path
NotResource. ListBucket is bucket-level, so its resource ARN is the bucket
and never matches an object path: the Deny always fired and a user could
not list their own prefix. Scope the per-user List deny with a StringNotLike
s3:prefix condition instead, the same mechanism the matching Allow uses.
* fix(s3api): keep ListBucket resource ARN at bucket level
ListObjects with ?prefix= was denied for IAM users granted s3:ListBucket
on the bucket ARN. authRequestWithAuthType promotes the prefix into object
so the legacy CanDo path can honor prefix-scoped Action strings, and that
promoted object leaked into the policy resource ARN, producing
arn:aws:s3:::bucket/<prefix> which never matches a bucket-level statement.
Keep the resource bucket-level for List in the bucket-policy and
IAM-attached-policy evaluators; prefix scoping stays in the s3:prefix
Condition. The CanDo path is untouched.
* fix(s3api): resolve List action at bucket level when prefix is promoted
The IAM evaluator built a bucket-level resource ARN but still passed the
prefix-promoted object to ResolveS3Action, so listing with a prefix made
hasObject true and misresolved ListBucketVersions/ListBucketMultipartUploads
to ListBucket. Resolve the action against the same zeroed object, and trim
the resource-ARN comments.
Bulk DeleteObjects carries the keys in the request body, so the route Auth
middleware ran a single bucket-level check with object="", building the
resource ARN as arn:aws:s3:::<bucket>. That never matches an s3:DeleteObject
policy scoped to <bucket>/*, so the entire batch was denied even though the
single-key DELETE worked with the same credentials.
Defer authorization to the handler and check each key via AuthorizeBatchDeleteKey,
mirroring AuthorizeCopySource: a synthetic DELETE /<bucket>/<key> request resolves
s3:DeleteObject (or s3:DeleteObjectVersion when a versionId is given) against the
object ARN. Denied keys come back as per-key errors while authorized keys still
delete, matching AWS semantics.
* fix(mount): don't strand a directory cached-but-empty when an off-loop wipe races a rebuild
Idle eviction, kernel Forget, and the copy-range fallback cleared a
directory's cached entries directly, off the metaCache apply loop, after
resetting the cached flag in inodeToPath as a separate step. A concurrent
rebuild could publish a fresh listing (markCachedFn) in between, so the late
DeleteFolderChildren left the directory flagged cached over an empty store.
lookupEntry then returns an authoritative ENOENT and ReadDir returns nothing,
so every file in the directory disappears from the mount although it is still
present on the filer.
Route those wipes through a new apply-loop step that resets the flag and wipes
the store together, serialized with a build's markCachedFn, and skips a
directory while it is building.
* fix(mount): route the meta-event retry cleanup through the apply-loop purge
The subscription-retry callback wiped the mount root's cached children
directly off the apply loop and reset the cache flags as a separate step — the
same pattern that can leave a concurrently-rebuilding root cached-but-empty.
Invalidate all flags (safe on its own, it never deletes entries) then purge the
root's children through the apply loop.
* [CheckDisk][GRPC]: implement MVP for disk health detection, added timeout for new grpc connections
* fix(volume): build disk health check on every platform
setDiskStatus only existed behind the statfs build tag, so disk.go failed
to compile on windows, openbsd, solaris, netbsd and plan9. Move the timeout
wrapper and failure tracking into the shared disk.go and have each platform's
fillInDiskStatus return an error, so every platform gets the same protection
from a stuck filesystem.
Also restore the uint64(fs.Bavail) cast: Bavail is int64 on freebsd, so the
unguarded multiply broke the freebsd build.
* fix(volume): keep one outstanding statfs probe per disk
A stuck statfs used to leave isChecking cleared by the timeout path, so the
next check spawned another goroutine while the previous one was still blocked
in the syscall, leaking one goroutine per minute on a hung disk. Clear the
flag only when statfs returns and treat an overlapping check as a failure, so
a hung filesystem keeps a single outstanding probe and still gets reported.
* fix(volume): assume disk available until the first health check
isDiskAvailable defaulted to false, and CollectHeartbeat skips locations that
are not available. A freshly started volume server would therefore omit every
volume from its first heartbeats until the async CheckDiskSpace ran, so the
master could briefly treat all of them as missing.
* fix(volume): label the disk error metric by data directory
The new gauge tagged the series with IdxDirectory while every neighbouring
resource gauge uses Directory, so the error series would not line up with them
in dashboards. Also log the underlying error instead of a generic message.
* test(volume): cover disk health success and repeated-failure paths
* fix(volume): make a healthy disk the zero-value default
Track the disk as isDiskUnavailable instead of isDiskAvailable so the safe
state is the zero value, matching isDiskSpaceLow. CollectHeartbeat only skips a
location once a check has actively marked it unavailable, so any DiskLocation
built without running CheckDiskSpace (tests, future call sites) still reports
its volumes instead of silently dropping them.
* feat(disk): detect degraded disks using IO latency probes
* feat(stats): introduce configurable disk I/O health probe with EWMA-based latency detection
* feat(disk): replace EWMA with sliding window algorithm for disk health detection and added user-friendly options
* feat(disk): improve disk health probing and recovery
* feat(volume): configure disk health checks via volume.toml
* fix(volume): Remove disk IO probe CLI options
---------
Co-authored-by: ptukha <ptukha@tochka.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
Explain:
- problem: Delete and DeleteProxied could panic on malformed URLs when a JWT was provided.
- root cause: maybeAddAuth was called before checking the error returned by http.NewRequest, so req could be nil.
- fix: return the request construction error before adding the Authorization header.
- validation: go test ./weed/util/http -run 'TestDelete(ReturnsInvalidRequestErrorBeforeAddingAuth|ProxiedReturnsInvalidRequestErrorBeforeAddingAuth)' -count=1; git diff --check
* fix(seaweed-volume): bound request body and stored-content expansion to prevent OOM
The Rust volume server buffered the entire upload body with
to_bytes(usize::MAX) and only checked the file-size limit afterward, so a
single large upload — or many concurrent uploads, since the in-flight byte
throttle defaults to 0 (unlimited) — could exhaust memory and get the process
OOM-killed under load. The read path had two more single-request OOM vectors:
`vec![0u8; manifest.size]` allocated from an attacker-controlled chunk-manifest
size, and gzip decompression was unbounded (gzip bomb).
- Bound the upload body read by file_size_limit_bytes (plus a margin for
multipart framing), mirroring Go's io.LimitReader(sizeLimit+1), and reject
oversize before the whole body is buffered.
- Validate manifest.size (reject negative / oversized) before allocating.
- Cap gzip output in maybe_decompress_gzip and route the inline GzDecoder sites
through it.
* fix(seaweed-volume): address review - chunk offset, 32-bit cast, decompress errors
- Validate chunk.offset before indexing in chunk-manifest expansion: a negative
offset wrapped to a huge usize and underflowed `end - offset` (panic from a
crafted manifest). Reject negative, skip out-of-range, use saturating math.
- Use usize::try_from for the upload body limit instead of `as usize`, so a
>usize::MAX file_size_limit on 32-bit caps at usize::MAX rather than silently
truncating to a tiny value.
- maybe_decompress_gzip now returns Result<_, GunzipError> distinguishing a
decode failure (callers fall back to raw bytes, as before) from hitting the
size cap (TooLarge), which now returns 413 instead of silently serving the
still-compressed bytes.
* fix(seaweed-volume): inflate manifest chunks into the result window to cap peak memory
The chunk-manifest expansion still doubled memory: `result` was already allocated
at manifest.size (<=2 GiB) and each compressed chunk was inflated into a separate
Vec (also up to 2 GiB), so a single request could peak near 4 GiB.
Decompress compressed chunks directly into their result[offset..] window (bounded
by the remaining space) so a chunk never allocates a second large buffer; peak
stays at ~manifest.size. Bytes past the window are dropped (matching the prior
truncation), and a fully-undecodable chunk still falls back to its raw bytes.
* fix(seaweed-volume): fall back to raw chunk bytes on any decode failure
Per review: the gzip fallback must run on any decode error, not only when no
bytes were decoded. Clear the partially-written output and copy the chunk's raw
bytes (truncated to the window), restoring the prior decode-failure behavior.
* docker: cross-compile the Go binary instead of emulating it under QEMU
The builder stage ran as the target platform, so arm64/arm/386 images
emulated the whole Go compile (and the full git clone) under QEMU. The
binary is CGO-free, so pin the builder to $BUILDPLATFORM and cross-compile
with GOOS/GOARCH (GOARM for v7), keeping every target's compile native.
* ci: build all release container variants in parallel
The build matrix throttled to two variants at a time on a stale rate-limit
worry. Pulls go through mirror.gcr.io and pushes target GHCR only, so the
five variants can all build at once.
* ci: copy each variant to Docker Hub from its build job
The separate copy-to-dockerhub job waited on the whole build matrix before
any GHCR -> Docker Hub copy could start. Move the crane copy into the build
job so each variant copies as soon as it is built, overlapping with the
others still compiling. tag-latest and helm-release now depend on build.
GetObject on a versioned object returned NoSuchKey forever when the
.versions directory existed but carried no latest-version pointer (empty
Extended metadata) while real version files remained inside it. The
self-heal path only fired for a dangling pointer (present but referencing
a missing file), not an absent one, so doGetLatestObjectVersion fell
straight through and errored on every read.
- doGetLatestObjectVersion now calls recoverLatestVersionWithoutPointer
when the pointer is missing or empty. An absent pointer is the legitimate
signal that a pre-versioning or suspended-versioning "null" object is
current, so that object wins; only when it is absent do we rescan
.versions/ and rebuild the pointer from the version files present.
Transient rescan failures propagate instead of being masked as NotFound.
- selectLatestVersion derives the version id from the v_<versionId> file
name when the Seaweed-X-Amz-Version-Id attribute is absent, so version
files written outside the normal versioned-PUT path (replicated or
restored entries) are still promotable. The orphan diagnostic uses the
same detection so an entry can't be both promoted and counted an orphan.
* fix(ec): pass per-volume data-shard count to the parity-shard split
ShardsInfo.DeleteParityShards/MinusParityShards looped ids 10..13, assuming
the fixed 10+4 layout. For a non-default ratio this splits data vs parity
wrong — a wide ratio (12+4, 16+6) drops real data ids >= 10, which breaks
ec.decode. They now take a dataShards argument (<= 0 falls back to
DataShardsCount) and clear ids dataShards..MaxShardCount. ec.decode threads
the data-shard count from collectEcNodeShardsInfo to both split call sites,
and admin LogicalSize passes DataShardsCount.
Also: EC cleanup now sets an explicit per-disk storage impact
(-len(ShardIds)) instead of falling back to the TotalShardsCount constant,
so freed-capacity accounting matches the shards actually removed.
OSS is always 10+4, so behavior is unchanged here; this keeps the split
ratio-correct and the API aligned with the enterprise per-volume override.
Adds parity-split ratio tests.
* ec: clear parity shards in one locked pass
Address review: DeleteParityShards looped si.Delete, taking the lock once per
id. shards is sorted by Id and shardBits is a bitmap, so mask off the high
bits and truncate the sorted slice at the first parity id (binary search) under
a single lock. Preserves the dataShards<=0 -> DataShardsCount default.
* fix(ec): resolve EC data-shard count from the volume's .vif on reboot
A volume server never loads a cluster EC config into memory, so startup
decisions that assumed 10 data shards mishandled volumes whose .vif
records a different ratio:
- validateEcVolume sized the expected shard against 10 data shards and
required >=10 local shards, so a volume with a non-default ratio and a
coexisting .dat could be wiped on reboot. Read the ratio from the .vif.
- pruneIncompleteEcWithSiblingDat used the hardcoded 10-shard threshold,
so a full data set for a non-default ratio with a healthy sibling .dat
was wiped as a partial leftover. Use the EcVolume's .vif-derived ratio.
Behavior is unchanged for the standard 10+4 layout (the .vif resolves to
10). Adds storage-level reboot tests.
* ec: avoid per-call allocations in ecDataShardsFromVif
Address review: the helper runs once per EC volume at startup. Replace the
slice+map dedup of the two dirs with direct conditional checks via a small
ecDataShardsFromVifDir helper, eliminating the heap allocations and GC
pressure when loading many volumes.
A Canceled/DeadlineExceeded from the caller's per-request context was
treated like a dead channel: it closed the shared cached ClientConn and
cancelled every other in-flight RPC on it with "the client connection is
closing". Under a burst of concurrent chunk assigns (e.g. a large S3
multipart upload) one slow assign hitting its 10s attempt timeout could
poison the connection for all the rest, cascading into a flood of 500s.
Thread the caller's context into shouldInvalidateConnection and only
invalidate on Canceled/DeadlineExceeded while that context is still live,
which isolates the genuine stale-channel signal (a peer restart behind a
k8s Service VIP). To carry the context, add a ctx parameter to the
existing WithGrpcClient, WithMasterClient, and WithMasterServerClient; the
master assign and volume-lookup paths pass their per-attempt context and
every other caller passes context.Background().
makeupDiff replays post-snapshot changes onto the compacted volume. For a
replayed deletion it appended a tombstone to the new .dat but recorded the
.idx entry with offset 0. When that deletion is the last replayed change the
tombstone lands at the .dat tail, and the post-commit integrity check skips
offset-0 entries, so it sees 32 trailing bytes it can't account for and flips
the volume read-only, reloading it as a SortedFileNeedleMap instead of the
writable map.
Record the tombstone's real .dat offset, matching the normal delete path; the
needle map still treats it as deleted off the negative size, so lookups are
unchanged. Mirror the same fix into the Rust volume server.
* s3: auto-enforce bucket quota read-only both ways
Quota read-only only ever flipped when an admin re-ran
s3.bucket.quota.enforce, so a bucket that went over quota stayed
read-only forever even after usage dropped back under.
Fold enforcement into the per-minute, leader-locked bucket-size loop
the s3 gateway already runs for metrics: it now flips each bucket's
read-only flag to match its quota in both directions, rewriting
filer.conf only when a flag actually changes. The set/clear decision
lives in one shared FilerConf.ApplyBucketQuotaReadOnly helper so the
shell command and the gateway can't drift.
* only manage read-only when a quota is set, never clobber manual locks
* trim comments
When the destination's stored mtime is newer than the incoming source version, UpdateEntry skips the update (last-writer-wins). A copy left truncated by an earlier failed replication trips this: the source kept the file's original mtime while the partial copy was written recently, so it looks "newer" and is never corrected. When the destination is strictly shorter than the source, re-replicate the full source content and replace the chunk list instead of skipping. Same shorter-than-source bypass for CreateEntry.
* s3api: use getEtagFromEntry for multipart part ETag to prefer Extended metadata
* s3api: add tests for getEtagFromEntry Extended ETag preference in multipart upload
* s3api: avoid double-quoting ETags in ListParts output
* s3api: add docstring for filer_multipart_etag_test.go
* fix(http): handle invalid gzip stream errors
Explain:
- problem: ReadUrlAsStream could panic when a response claimed gzip encoding but the body was not a valid gzip stream.
- root cause: the gzip reader error was ignored and a nil reader was deferred and read from.
- fix: return the gzip.NewReader error before registering Close or reading.
- validation: go test ./weed/util/http -run TestReadUrlAsStreamReturnsGzipReaderError -count=1; git diff --check.
* test: avoid closing shared global HTTP client in unit test
* filer: name the read-only path in the write rejection
The write path rejected creates under a read-only rule with a bare
"read only", giving no hint which path was locked or why. Wrap the
error with the matched location prefix and a quota hint so a FUSE
mkdir or S3 put points straight at the offending bucket.
* return the read-only reason over HTTP and drop any query string from the fallback prefix
A destination volume server that hits its idle deadline while reading a large upload body under load returns 400 "read tcp ...: i/o timeout". fetchAndWrite retried that on the flat ~1s RetryUntil backoff, hammering the already-overloaded destination. Route i/o timeout, connection reset, broken pipe and net.Error timeouts through the same escalating 10s-2min backoff already used for EOF so it can recover.
shell: only skip system-log subtree in fs.meta.save, not fsck/verify
The SystemLogDir skip lived in the shared BFS traversal, so volume.fsck
built its in-use set without the /topic/.system/log chunks and flagged
every referenced log needle as orphan. -reallyDeleteFromVolume would then
delete live log data and leave dangling filer entries. Gate the skip
behind a flag that only fs.meta.save sets.
* fix(ec_bitrot): cap sidecar block_size in ValidateBitrotManifest
A sidecar loaded from disk (or supplied via a backfill/peer RPC) could carry a
huge power-of-two block_size that passed validation, then force a multi-GiB
scratch-buffer allocation in scrub/verify. Add a shared MaxBitrotBlockSize
(64 MiB) constant, enforce it as an upper bound in isPow2MultipleOf1MiB, and
derive the volume flag cap from the same constant so they cannot drift.
* fix(ec_bitrot): don't destroy a valid destination sidecar on an optional copy
writeToFile opened the destination with O_TRUNC before knowing whether the
source had the file, so an optional copy (ignoreSourceFileNotFound) from a source
that lacks the .ecsum truncated and then removed a valid pre-existing destination
sidecar. Stage the optional copy into a temp sibling and commit it with an atomic
rename only when the source actually delivered the file; a missing source is now
a no-op. Mandatory copies keep their in-place behavior.
* ec: add EC bitrot checksum protobuf
EcBitrotProtection/EcShardChecksums/ChecksumAlgorithm sidecar messages,
copy_ecsum_file and unsafe_ignore_sidecar fields, and a CHECKSUM scrub mode.
* ec: bitrot checksum sidecar format, validation, and per-volume load
Per-shard CRC32C block checksums in an optional <base>.ecsum sidecar with a
self-integrity header; validation, rolling builder, backfill primitive, and
EcVolume load on mount + removal on destroy.
* ec: capture per-shard checksums at encode; verify-and-exclude on rebuild
WriteEcFilesWithContext returns the protection computed inline during encoding.
generateMissingEcFiles verifies present inputs against the sidecar, excludes
corrupt ones, regenerates in place, and re-verifies; fail-closed unless
unsafe_ignore_sidecar, removing all generated outputs on failure.
* ec: read-only checksum scrub with Reed-Solomon arbiter
ChecksumScrub verifies each local shard against the sidecar and reconstructs
flagged shards from the clean shards so stale-sidecar false positives are not
reported. Wired to the gRPC CHECKSUM mode and ec.scrub -mode checksum.
* ec: server-side bitrot sidecar write, copy, cleanup, and opportunistic backfill
Write .ecsum at fresh encode; propagate it with copy_ecsum_file (tolerant);
remove it on full delete and decode; rebuild honors unsafe_ignore_sidecar and
opportunistically backfills a sidecar when all shards are reachable.
* ec: volume server bitrot config flags
-ec.bitrotChecksum (default on) and -ec.bitrotBlockSizeMB (default 16).
* fix(ec_bitrot): bound -ec.bitrotBlockSizeMB before the int64 multiply
Validate the MiB value is in [1, 1024] before multiplying by 1 MiB, so a huge
flag value cannot overflow int64 and slip past the power-of-two check, and a
block size cannot collapse a sidecar to a few oversized blocks.
* fix(ec_bitrot): distribute the .ecsum sidecar from the worker encode path
The worker EC encode wrote the generation-0 sidecar locally but never added it
to shardFiles, so DistributeEcShards never shipped it and the distributed
holders came up unprotected. Append it to shardFiles and map the ecsum shard
type to its extension in the sender so it travels with the shards.
* fix(ec_bitrot): remove orphaned sidecars when the generation is gone
Gate sidecar removal on existingShardCount==0 alone rather than also requiring a
stray .ecx. A sidecar whose shards have all been deleted is orphaned and must be
removed even when no .ecx remains, or it leaks. .ecx/.ecj/.vif removal stays
gated on hasEcxFile as before.
* fix(ec_bitrot): do not fold checksum blocks scanned into TotalFiles
ChecksumScrub's first return is blocks scanned, not files. Discard it so the
scrub response's TotalFiles (a needle/file count) is not inflated by the block
count for CHECKSUM mode.
* test(ec_bitrot): clean up generated .ecsum sidecars in removeGeneratedFiles
* fix(ec_bitrot): reject an oversized sidecar payload before the uint32 cast
The header stores payload_len as a uint32; bound the payload before the
conversion so a pathological manifest cannot truncate the length field and
corrupt the sidecar. A real manifest is a few KB, so this never trips.
* fix(ec_bitrot): cap -ec.bitrotBlockSizeMB at 64 MiB
The block size becomes the per-shard scratch buffer the scrub/backfill path
allocates, so an over-large value (e.g. 1 GiB) is a memory hazard per concurrent
scrub worker. Lower the upper bound from 1024 to 64 MiB.
* fix(ec_bitrot): add -ecUnsafeIgnoreSidecar to weed tool fix -ecx
The -ecx recovery path reconstructs missing shards via RebuildEcFilesWithContext,
which fails closed on a malformed/stale .ecsum. Without an override flag an
operator could not complete the rebuild without manually deleting the sidecar.
Expose -ecUnsafeIgnoreSidecar (default false) and thread it through.
* fix(ec_bitrot): bound sidecar payload with a direct int constant; drop readFull
Guard len(payload) against a plain int constant (1 GiB) before the allocation
instead of a uint64 MaxUint32 compare, so the allocation-size value is provably
bounded (clears the CodeQL overflow alert) and the math import is no longer
needed. Inline os.File.ReadAt with io.EOF handling in verifyShardFileBlocks and
remove the now-redundant readFull helper (os.File.ReadAt fills the slice or
errors).
* test(ec_bitrot): use slices.Contains instead of a hand-rolled containsU32
* refactor(ec): fold the EcFiles WithContext variants into the base functions
RebuildEcFiles now takes the *ECContext directly (nil => derive from .vif as
before) and WriteEcFiles takes it too (nil => default), removing the parallel
RebuildEcFilesWithContext / WriteEcFilesWithContext names. Callers that had an
explicit context drop the WithContext suffix; the default-context callers pass
nil. No behavior change.
* refactor(ec): pass BackgroundECContext instead of nil to Write/RebuildEcFiles
Add a non-nil BackgroundECContext placeholder (analogous to context.Background())
and have callers with no specific layout pass it instead of a nil *ECContext.
WriteEcFiles resolves a zero/background context to the default ratio and
RebuildEcFiles resolves it from the .vif, so behavior is unchanged.
* fix(ec_bitrot): make BackgroundECContext a func; RebuildEcFiles fails closed on bad .vif
- BackgroundECContext is now a function returning a fresh *ECContext, so callers
cannot mutate a shared singleton or race on it (and it mirrors context.Background,
which is also a function).
- RebuildEcFiles now propagates the MaybeLoadVolumeInfo error: a present-but-
unreadable .vif fails closed instead of silently rebuilding with the default
ratio (which would corrupt a custom-ratio volume). Pass an explicit ctx to override.
* shell: warn in volume.list when a volume id spans collections
A reused volume id, the result of the master handing out an id already
used by another collection (for example after losing its max-volume-id
counter on restart), makes collection.delete destroy the wrong
collection's data and makes any bare-id lookup, move, or vacuum
ambiguous. volume.list now scans the full topology and warns on ids
present in more than one collection so the clash is visible before any
destructive operation.
* volume.list: track duplicate ids lazily, sort with slices.Sort
Allocate the per-id collection set only on the first cross-collection clash
instead of one set per volume, so allocations scale with duplicates rather
than the volume count.
filemeta is the filer SQL store's default table name. A bucket of that
name passes VerifyS3BucketName but is rejected by the store's isValidBucket
guard on every operation, so it creates fine yet can't be deleted and wedges
fsck. Reject it at creation so both checks agree.
* s3: commit a versioned PutObject and its latest pointer in one transaction
A versioned PutObject wrote the version file and flipped the .versions
latest pointer in two separate routed transactions. Fold the
RECOMPUTE_LATEST into the version file's PUT so both commit atomically
under the object's per-path lock: the recompute, applied after the PUT in
the same transaction, scans the directory and sees the new version. A
crash can no longer leave the version present with a stale pointer.
putToFiler now takes a putFinalize describing the finalize step — routed
mutations folded into the PUT, or an afterCreate run under the object
write lock off the ring. Suspended-versioning keeps its afterCreate-only
form; multipart, copy, and delete-marker finalizes are unchanged.
* s3: trim verbose finalize comments
uploadFileGrpc passed SaveSmallInline with a 256 KiB limit, so uploads under
that size were written to entry.Content instead of a volume. The filer's own
upload path never inlines unless saveToFilerLimit is set (default 0), and the
S3 server shares that path. Drop the inline options so admin uploads always
land in volumes.
The viewer embedded images and PDFs through the download URL, which sent
Content-Disposition: attachment, so the browser downloaded them instead of
rendering. Add an inline mode to the download endpoint, limited to images and
PDFs so a hostile upload (HTML, SVG) can't run as same-origin script, set
X-Content-Type-Options: nosniff, and resolve the MIME the same way the viewer
does. The viewer now requests the inline URL.
* volume: don't drop the last writable slot on auto-sized disks
MaybeAdjustVolumeMax subtracted 1 from the per-disk slot count, so a disk
with room for exactly one volume (free between 1x and 2x the size limit)
reported 0 slots. The master then never grew a writable volume and every
assign drained its retry budget, so writes failed with context deadline
exceeded. Count the full volumes that actually fit, floored at one for an
auto-sized disk that has free space.
* mini: show disk and volume capacity in the startup banner
Print free space, volume size, total volume count and free volume count
under the data directory line, so a volume size limit that outstrips the
disk is visible at startup instead of surfacing later as failed writes.
* terraform: add cloud-agnostic core renderer module
Renders per-node weed argv, systemd units, config files, disk-mount and secret-fetch scripts, and cloud-init from an address map. Creates zero cloud resources. Flags verified against the weed binary: volume uses -mserver for the master list, gRPC is -port.grpc (auto http+10000), minFreeSpacePercent is a string, filer store via -defaultStoreDir.
* terraform: add mTLS and JWT security module
Generates the CA, per-component certs with distinct CNs, and JWT signing keys via the tls/random providers. Emits a core_security object plus PEMs for secret-store delivery.
* terraform: add AWS deployment module and examples
Reserves stable ENIs first, renders config via the core, then creates instances, prevent_destroy EBS data disks mounted at /data, and the cluster security group. With enable_security, generates certs/JWT, stores them in SSM SecureString, grants an instance role, and fetches them at boot so secrets stay out of user_data. Keyed for_each on every stateful tier.
* terraform: add local cluster test harnesses
run_local_cluster.sh and run_local_secure.sh render a cluster with the core and run real weed processes, asserting master quorum, volume registration, filer/s3 round-trips, mutual-TLS formation, and JWT enforcement. Use an isolated high port range with a guard so they never touch a cluster already running on the machine. The weed binary defaults to $(go env GOPATH)/bin/weed.
* terraform: add CI workflow and README
fmt/validate/tofu-test plus smoke jobs that build weed and run both harnesses.
* terraform: guard against empty filesystem UUID in mount script
An empty UUID made grep -q match any fstab line, skipping the fstab entry and breaking the mount. Fail fast when blkid returns no UUID.
* terraform: sanitize cluster name in WEED_CLUSTER env keys
Hyphens or spaces in cluster_name produced invalid systemd/bash env var names; map non-alphanumerics to underscores.
* terraform: omit empty jwt.signing block from security.toml
With enable_security and no JWT key, the template emitted [jwt.signing] key="". Gate the block on a non-empty key and cover it with a test.
* terraform: mark core security input as sensitive
The security object carries JWT signing keys; keep them out of plan output and known values.
* terraform: enforce jwt_length minimum of 32
* terraform: note region/AZ coupling in HA example
* terraform: guard WORKDIR before recursive delete in test harnesses
* terraform: fix README fence language and test count
* terraform: handle embedded s3 with no filer nodes
Indexing sort(keys(var.filers))[0] errored at plan time when embedded S3 was enabled but no filers were defined; fall back to an empty config source.
* terraform: scope kms:Decrypt to a configurable key arn
Replace the hardcoded Resource="*" with a kms_key_arn variable (default "*") so production can restrict decrypt to a specific CMK.
* terraform: encrypt EBS data volumes at rest
Set encrypted = true on the volume/filer data disks and the all-in-one example disk.
* terraform: protect filer instances from API termination
Filers hold the leveldb2 metadata store, so they are stateful and get the same disable_api_termination as masters and volumes.
* terraform: stop instance before detaching in all-in-one example
* terraform: drop stale references to the removed plan doc
* terraform: correct stale mount-step comment in aws module
* terraform: mark Terraform support as experimental in README
GET/HEAD object with an explicit versionId that does not exist returned
NoSuchKey. AWS S3 returns NoSuchVersion (404) for this case; tools that
distinguish "key gone" from "this version gone" rely on that code.
Add the ErrNoSuchVersion error code and use it on the GET and HEAD
specific-version lookups. Only a genuine not-found maps to NoSuchVersion;
a transient or internal filer error now maps to InternalError (500)
instead of a misleading 404. getSpecificObjectVersion wraps its lookup
error with %w so callers can detect filer_pb.ErrNotFound.
Add a per-row Export button (files and folders) that downloads the filer
metadata in the length-prefixed FullEntry protobuf format that weed shell
fs.meta.load reads, gzipped as <name>.meta.gz like fs.meta.save. Folders are
walked recursively via the filer BFS metadata stream, excluding the system
log subtree. Streamed over gRPC so it keeps working with the filer HTTP
listener disabled.
withFilerClientFailover treated a filer's ErrNotFound like a transport
failure: it kept the result, re-queried every other filer, and finally
wrapped the answer as "all filers failed, last error: ... no entry is
found in filer store".
For workloads with many legitimate misses (e.g. GET object?versionId=X
for a version that was deleted or expired), this turned each 404 into N
filer round-trips and produced a misleading error string.
A reachable filer that answers ErrNotFound has given an authoritative
answer; failover exists to route around unreachable or unhealthy filers,
not to look harder for an entry the store reports as absent. Return
ErrNotFound directly instead of fanning out. Callers that need
read-after-write retries already handle that at the S3 semantic layer
(e.g. getLatestObjectVersion).
* perf(s3.iam.GetUser): Make the API default to the request username if not
specified
This makes the Embedded S3 IAM API align with the documented behavior of the AWS IAM
API as per AWS Docs: https://docs.aws.amazon.com/IAM/latest/APIReference/API_GetUser.html
BREAKING CHANGE: This changes the default behavior of the Embedded IAM API to use the
username of the user holding the accesskey used to make the request in
the GetUsername request handler.
* test: cover GetUser implicit username default
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* operation: bound upload retries and honor context cancellation
retriedUploadData hardcoded 3 attempts and an uninterruptible backoff
sleep. A synchronous replica write to a dead host therefore paid the
full dial timeout three times over before failing.
Add UploadOption.MaxAttempts (<=0 keeps the default of 3) so callers can
cap attempts, and make the loop return as soon as the context is
cancelled so an abandoned upload unwinds instead of retrying.
* topology: fail replica writes fast when a replica is unreachable
DistributedOperation already returns on the first error, but a single
dead replica is itself the slow result: its goroutine retries the upload
three times through the dial timeout (~30s) before any error surfaces,
stalling the originating client write the whole time.
Make the replica write a single attempt (MaxAttempts=1) so a dead
replica fails after one dial timeout instead of three, and thread a
context into DistributedOperation that is cancelled once the outcome is
decided, so a healthy replica is no longer held hostage by one stalled
in a dial. The originating client write is what retries.
* topology: keep replica deletes off the client request context
ReplicatedDelete runs after the local needle is already deleted. Driving
the replica deletes off r.Context() means a client disconnect cancels
them and orphans needles on the replicas, so use a background context.
* operation, topology: trim comments on the replica fail-fast path
* fix: return immediately on first error in DistributedOperation
* simplify DistributedOperation fail-fast to a single buffered channel
Drop the separate errCh: the collector now fails fast on the first error
it reads off the buffered resultCh and returns ret.Error(), so the early
return carries the same [host]: err annotation as the aggregated path and
there is no select race between two channels.
---------
Co-authored-by: Ubuntu User <ubuntu@example.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
A volume removed from writables by the write-assign path stamps fullSince
in RecordAssign, which UpdateVolumeSize's recovery branch needs to re-add
it once it decays back under the limit. A volume removed by the heartbeat
capacity path (SetVolumeCapacityFull) never stamped it, so after the
reported size dropped — vacuum, TTL expiry, bulk deletes — the volume
stayed out of writables forever, even though every heartbeat carried the
smaller size.
Stamp fullSince when the capacity path actually removes a volume from
writables, so the existing recovery branch fires. Gating on the removal
keeps it paired with the caller's activeVolumeCount decrement, matching
RecordAssign. Oversized volumes still stay out, as before.
* fix(vacuum): notify master writable after worker vacuum commit
Add Phase 3 (markWritableOne) that walks vacuumTargets and calls
VolumeMarkWritable on each replica's volume server, mirroring
batchVacuumVolumeCommit's per-replica SetVolumeAvailable. Failures are
logged at WARN; the task does not fail because the vacuum itself
already succeeded. See upstream seaweedfs#9685.
* fix(vacuum): delay Phase 3 to let post-commit heartbeats settle
Phase 3's VolumeMarkWritable can race with the volume server's first
post-commit heartbeat. SetVolumeWritable adds the vid to writables,
but a racing heartbeat whose ReadOnly value changed re-runs
EnsureCorrectWritables against the master's per-replica cache, and any
replica still cached as ReadOnly=true silently removes the vid again
— with no further heartbeat change to trigger another recovery.
Sleep 30s after Phase 2 (Commit) so every replica's post-vacuum
heartbeat has reached the master before Phase 3 fires. Cancel cleanly
on ctx.Done so a shutdown during the wait still exits.
* fix(vacuum): reduce post-commit settle from 30s to 10s
VolumePulsePeriod is 5s, so 10s (2x) is enough margin for every
replica's post-commit heartbeat to reach the master before Phase 3
fires. 30s was overly conservative and made TestVacuumExecutionIntegration
hit its 30s context deadline.
* fix(vacuum): use flat 1m timeout for VolumeMarkWritable RPC
VolumeMarkWritable on the volume server is a metadata operation
(reopen idx + flags + master ReadOnly=false heartbeat), independent
of volume size. Scaling via vacuumTimeout(time.Minute) gave it tens
of minutes — even hours on TB volumes — so a single unresponsive
replica could block Phase 3 indefinitely. Use a flat 1m cap.
* fix(vacuum): gate post-vacuum mark-writable on commit read-only state
Phase 3 force-called VolumeMarkWritable on every replica unconditionally,
clearing the read-only flag and persisting ReadOnly=false even for a
replica left read-only by an operator, an EIO quarantine, or low disk.
That overrode states the master deliberately keeps out of writables;
master built-in vacuum gates the same step on the commit's IsReadOnly via
SetVolumeAvailable.
Capture the VacuumVolumeCommit response and skip Phase 3 when any replica
came back read-only, letting it recover on its own ReadOnly=false
heartbeat. Drop the 10s post-commit settle sleep: the heartbeat race it
guarded needed a replica cached read-only at the master, which the gate
now excludes.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* wdclient, dailyrun: add equal jitter to retry backoff
Prevents thundering-herd retries when many clients recover from a
transient failure at the same instant (e.g., filer restart, network
partition healing).
Uses equal jitter: wait in [d/2, d) instead of deterministic d.
This bounds the maximum wait while still desynchronizing clients.
Files:
- weed/wdclient/filer_client.go (LookupVolumeIds retry loop)
- weed/s3api/s3lifecycle/dailyrun/dispatch.go (dispatchWithRetry)
Tests added for bounds, zero/negative inputs, and distribution sanity.
Closes#9735
* wdclient: honor ctx cancellation during LookupVolumeIds backoff
---------
Co-authored-by: Mohamed Chorfa <mohamed.chorfa@thalesgroup.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
Adds standard Kubernetes liveness/readiness endpoints to all HTTP
servers that were missing them:
- S3: adds /readyz (already had /healthz)
- IAM: adds /healthz and /readyz (had none)
- Volume: adds /readyz (already had /healthz)
- Filer: adds /readyz on default and readonly mux
- Master: adds /healthz and /readyz at root level
(preserves existing /cluster/healthz)
All endpoints reuse existing health handlers or return 200 OK as a
minimal foundation. Future PRs can enhance /readyz with dependency
checks without breaking the contract.
Closes#9736
Co-authored-by: Mohamed Chorfa <mohamed.chorfa@thalesgroup.com>
On a read-only watched path the idle heartbeat keeps sync_offset fresh,
but a busy source filer still emits a MaxUnsyncedEvents marker after many
filtered events. The marker has a non-nil but empty EventNotification, so
the client routed it to the event path, where it advanced no real
watermark yet drove offsetFunc to republish the stale processed
watermark — regressing the gauge between heartbeats and spiking the
derived lag every time a filtered-event burst landed.
Route the empty marker through OnIdleHeartbeat like the idle heartbeat so
its fresh timestamp keeps the gauge current; it still advances the
in-stream resume cursor.
* fix(shell): verify volume.merge output before overwriting replicas
volume.merge overwrote every replica with the merged copy without checking it was complete. Read back the merged copy and refuse to overwrite unless it holds at least as many live needles as the most complete source replica, leaving the originals intact on a short or empty merge.
* fix(shell): keep merged volume until all replicas are rebuilt
On a copy failure partway through the overwrite loop, the temporary merged copy was deleted along with the half-rebuilt replicas. Stop deleting it until every replica has been rebuilt; on failure the verified copy is kept so the merge can be re-run to completion.
* refactor(shell): reuse readVolumeStatus in ensureVolumeReadonly
* fix(shell): guard against nil volume status response
A bearer-token client whose SDK appends a CRC32 trailer sends an
unsigned-streaming PUT (STREAMING-UNSIGNED-PAYLOAD-TRAILER) with no SigV4
signature, so getRequestAuthType classifies it as authTypeStreamingUnsigned.
The auth dispatch ignored the bearer token and fell back to anonymous, and
newChunkedReader tried to verify the bearer token as a SigV4 seed signature
and failed, so the body could not be decoded either.
Dispatch the streaming-unsigned auth on whatever credential is present
(SigV4 / JWT / anonymous), and skip the SigV4 seed-signature recompute for
JWT requests in the chunked reader.
* fix(volume): verify the .dat-tail needle in the integrity check
CheckVolumeDataIntegrity checked the last entry by file position in the .idx
and, for a live needle, flipped the volume read-only when fileSize > fileTailOffset.
That entry is the .dat tail only when the .idx is in append order; a key-sorted
.idx (weed fix and other rebuilds listed entries by key) puts the highest-key
needle last, whose tail sits mid-file, so healthy volumes went read-only on every
load and re-running weed fix only reproduced the sorted index.
Locate the needle at the maximum offset — the one physically last in the .dat —
and verify the .dat ends exactly at it, regardless of .idx ordering. The
append-ordered common case stays O(1) (the last entry's on-disk end matches the
.dat size); only a key-sorted index pays a single linear scan. Deletion
tombstones at the tail are now verified too, instead of skipping the file-size
check.
* fix(command): weed fix rebuilds the .idx in .dat offset order
SaveToIdx wrote entries via AscendingVisit — sorted by key, the .sdx/.ecx shape
— so the rebuilt .idx put the highest-key needle last instead of the .dat-tail
needle, and dropped tombstones whose live needle was gone. Collect the live and
deleted entries, sort by .dat offset, and write them in append order so the .idx
stays a faithful log whose last entry is the real .dat tail.
Modern botocore attaches a CRC32 trailer to plain PutObject, turning the
payload into STREAMING-UNSIGNED-PAYLOAD-TRAILER. An anonymous upload then
carries that header but no Authorization, so it was classified as
authTypeStreamingUnsigned and sent straight to SigV4 verification, which
rejected it as AccessDenied while explicit credentials kept working.
Fall back to the anonymous identity when an unsigned-streaming request
carries no signature, mirroring the plain anonymous path. The request
stays classified as unsigned-streaming so the chunked body is still
decoded.
* test(framework): support multiple disks per server in MultiVolumeCluster
StartMultiVolumeClusterWithDisks gives each volume server N data
directories (one DiskLocation each), passed to -dir as a comma list, with
a per-server disk-dir accessor for file inspection. StartMultiVolumeCluster
keeps its one-disk default.
* test(ec): end-to-end encode over a multi-server multi-disk stuck layout
A volume in the stuck state — real .dat source, a 0-byte stub replica, and
partial stale EC shards from an interrupted encode — must converge to one
valid EC layout. Asserts the full shard set across servers, .ecx/.vif kept
per server (info file survives the source-volume delete), stale shards
cleared, and no regular .dat/.idx left behind.
* fix(storage): keep EC .vif when deleting a coexisting regular volume
A regular volume and an EC volume for the same id share <base>.vif. When
EC shards are distributed onto a server that still holds the regular
volume — the encode source, or any replica the planner targets — the
post-encode VolumeDelete ran removeVolumeFiles and stripped the shared
.vif, leaving the freshly built EC volume without its info file.
Skip the .vif in removeVolumeFiles when an EC volume for the same id
exists on the disk (mounted, or a sealed .ecx on disk). The regular
volume's .dat/.idx still go; the EC sidecars survive.
A two-server end-to-end test encodes a volume whose source and a stub
replica both also receive shards, and asserts the final on-disk layout:
both .dat/.idx gone, each server holding only its assigned shards plus
.ecx/.vif. Storage unit tests cover the with-EC and no-EC cases, and the
Rust seaweed-volume port carries the same guard and tests.
* test(storage): assert .idx is removed in the no-EC destroy case
Strengthen TestDestroyRemovesVifWhenNoEc to confirm the full regular
volume cleanup (.dat, .idx, .vif) when no EC volume coexists.
* fix(filer): derive inodes by hash instead of a snowflake sequencer
Compute the same inode the FUSE mount would: non-hard-linked entries hash path + crtime, hard links hash their shared HardLinkId so every link resolves to one inode. Removes the snowflake inodeSequencer and the SEAWEEDFS_FILER_SNOWFLAKE_ID knob; inodes are now deterministic across filers.
* chore: remove the experimental NFS gateway
The NFS frontend ('weed nfs') was the only consumer of the inode->path index. Remove the weed/server/nfs package, the command and its registration, the integration test harness, and the CI workflow; go mod tidy drops the willscott/go-nfs and go-nfs-client dependencies.
* refactor(filer): drop the inode->path index
With the NFS gateway gone, nothing reads it. A regular file's inode is a pure hash of its path and a hard link's is a hash of its shared HardLinkId -- both derivable on demand -- so the secondary KV index and its write/remove hooks are dead. Removes filer_inode_index.go and the recordInodeIndex hooks from the store wrapper.
* add make test_keylock_s3 for local develop and debug
* fix typos
* add condition oidc:azp
* docker: reuse test/s3/iam realm and iam config for keycloak dev compose
Point the keycloak dev compose at the existing test/s3/iam configs instead
of a parallel realm/port/key/role set. Adds one declarative realm import
(seaweedfs-test-realm.json) as the single realm source and drops the
duplicated iam.json/s3.json.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(ec): delete empty stub replicas before distributing EC shards
An interrupted encode can leave a 0-byte .dat replica behind. Until now
the only thing that removed it was deleteOriginalVolume, which runs after
distribute+mount and calls VolumeDelete -> removeVolumeFiles. A regular
volume and an EC volume share the same <collection>_<vid>.vif path, so
deleting the stub at that point strips the .vif out from under the
freshly distributed shards.
Sweep the original replicas with VolumeDelete(OnlyEmpty=true) before
distribute: doIsEmpty uses the same superblock threshold, so only the
0-byte stubs go and any data-bearing replica is refused and kept for the
post-verify delete. Servers cleared in the sweep are skipped by
deleteOriginalVolume so it never touches a server that now holds only EC
shards.
* fix(ec): fail the encode when an empty-replica sweep can't confirm a node
The sweep swallowed every VolumeDelete(OnlyEmpty) error, so a transient
failure on a stub node fell through to the post-verify force-delete on
that node — the shared-.vif clobber the sweep exists to avoid.
Treat only the expected cases (volume not empty, or already gone) as
leave-in-place; any other error propagates and fails the encode, which
rolls back the readonly marks and retries next cycle.
* fix(ec): prefer credible replica as canonical metric in EC detection
An interrupted encode can leave a 0-byte .dat replica behind. When that
stub sits on a lower-sorting server than the real replica, the
lowest-server canonical pick reported Size=0, tripped the min-size gate,
and the volume was stranded in skippedTooSmall: detection never proposed
an encode, so the partial EC shards were never cleared and re-distribute
kept hitting the mounted-volume guard.
selectCanonicalMetric now prefers the lowest-server credible replica
(data-bearing, not already EC), falling back to the lowest-server metric
only when nothing is credible so the downstream gates skip as before. A
leftover EC shard set on a lower server no longer short-circuits the
volume at the IsECVolume guard either, so the orphan-source cleanup and
re-encode paths get their chance.
* fix(ec): treat a bare superblock .dat as a stub too
An interrupted encode or copy can write the 8-byte superblock and then
fail, leaving an 8-byte .dat with no data. isStubReplica used a strict <
so that file slipped through as credible, could win the canonical pick on
a low server, and re-tripped the min-size gate. Use <= the superblock so a
data-less .dat never shadows a real replica.
* fix(s3): honor MetadataDirective=REPLACE for system metadata on CopyObject
* fix(s3): match copy metadata keys case-insensitively for legacy data
Legacy / non-S3 write paths (FUSE mount, direct filer HTTP API, older
versions) may persist Cache-Control etc. in lowercase form. Make
isManagedCopyMetadataKey case-insensitive so mergeCopyMetadata still
clears stale source values under REPLACE, and let the COPY branch of
processMetadataBytes fall back to a lowercase key on the source so
legacy values survive into the destination (re-emitted as canonical).
Mirrors the existing x-amz-meta-* backward-compat path.
* fix(s3): keep legacy non-canonical tag and system metadata across COPY
The previous case-insensitive isManagedCopyMetadataKey caused
mergeCopyMetadata to delete legacy lowercase x-amz-tagging-* and
mixed-case system headers, but the COPY branch in processMetadataBytes
only matched canonical or strict-lowercase keys when re-populating
them, so any non-canonical key was permanently dropped on COPY.
- COPY now scans existing in a single pass and uses strings.EqualFold
against the system header whitelist, re-emitting under the canonical
header name. Handles any case folding (CACHE-CONTROL, Cache-control,
etc.), not just strings.ToLower.
- COPY tagging branch now uses hasPrefixFold(k, AmzObjectTagging) and
re-emits the canonical X-Amz-Tagging-<suffix>, mirroring the existing
X-Amz-Meta-* migration path.
- Tests cover lowercase/uppercase/mixed-case system headers and tags
surviving COPY.
* fix(s3): make COPY of system metadata and tags deterministic across case variants
Single-pass EqualFold matching let Go's randomized map iteration pick
either the canonical or a legacy-cased value when both lived on the
source, so the COPY result varied between calls.
Both COPY branches now use two passes: a canonical-exact lookup first,
then a case-insensitive fallback that only writes when the canonical
slot is still empty. Mirrors the collision-check pattern used by the
X-Amz-Meta-* migration path.
Tests run the canonical-vs-legacy collision 32 times each to exercise
varied map orders.
* fix(s3): apply REPLACE Content-Type on in-place copy
The metadata-only self-copy path never set Attributes.Mime, so a same-key
CopyObject with REPLACE and a new Content-Type silently kept the old type.
Route in place only when the Mime is unchanged; otherwise take the locked
clone path (still metadata-only, reuses source chunks) and set the new Mime
there. Also covers the versioned self-copy path.
* perf(s3): drop per-key ToLower in isManagedCopyMetadataKey
Use the allocation-free hasPrefixFold helper instead of lowercasing the key
and both constant prefixes on every metadata-key check.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* chore(weed/storage/backend/s3_backend): remove unused function
* fix(s3_backend): cache session under the composite region|endpoint key
createSession looked up sessions by region|endpoint but stored them by
region alone, so the cache never hit and a new session was built every
call. With getSession gone the lock can also drop to a plain Mutex.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(shell): don't halt volume.fsck purge on a stuck read-only volume
A failed VolumeMarkWritable on one volume aborted the entire fsck purge
run; per-volume errors now log and continue so remaining volumes still
get purged.
* fix(shell): unify volume.fsck per-volume skip logging at the caller
Return the mark-writable error from purgeOneVolume instead of logging
in two places — the caller already prints "skip purging volume N: %v"
and defers still fire on the error return.
* fix(shell): collect volume.fsck purge-skipped volumes and report at end
Track volume IDs whose purge was skipped (mark-writable failure or
other per-volume errors) and print a sorted summary so operators don't
have to scrape the run log to find them. Deletes for those volumes are
already skipped; this just makes them explicit.
* fix(s3tables/iceberg): make metadata spec-compliant and accept real-world manifest names
Two related issues prevent SeaweedFS S3 Tables from interoperating with
strict Iceberg clients (Java/Spark/Flink/Trino):
1. iceberg-go v0.5.0 serializes empty TableMetadata state by dropping
keys via `omitempty` on optional pointer/slice fields. The Iceberg
table spec, however, requires `current-snapshot-id`, `snapshots`,
`snapshot-log`, `metadata-log`, and `refs` to be present even when
empty (`current-snapshot-id` must be -1 for a table with no
snapshots). Java's TableMetadataParser uses JsonUtil.getLong on
`current-snapshot-id` and throws "Cannot parse missing long
current-snapshot-id" against responses produced by this server.
2. The Iceberg layout validator only accepts manifest filenames that
match Iceberg's internal naming (`{uuid}-m{n}.avro`,
`snap-{n}-{n}-{uuid}.avro`). Real writers — notably Flink's sink —
emit manifests like
`{flink-job-id}-{checkpoint}-{operator-id}-{n}.avro`, which the
validator rejects with 403, breaking INSERT commits.
Fixes:
* Add ensureMetadataSpecCompliance helper that backfills the five
spec-required empty-state fields when iceberg-go omits them or emits
explicit JSON null. Apply it on every code path that writes
v*.metadata.json to S3 or returns metadata to clients
(handlers_table create-table, handlers_commit, commit_helpers
create-on-commit, plus MarshalJSON on LoadTableResult and
CommitTableResponse). Real values from non-empty tables are never
overwritten.
* Add catch-all regex entries to metadataFilePatterns accepting any
*.avro / *.metadata.json filename composed of [A-Za-z0-9._-]. The
Iceberg spec does not mandate filename format; the strict patterns
remain for documentation. Metadata-directory subdirectory rejection
and the data-file path validation are unchanged.
No upstream dependencies are forked: iceberg-go stays at v0.5.0 and
go.mod is untouched. The compliance layer can be removed once upstream
emits spec-compliant output.
Tests (all pass under `go test -race`):
- metadata_compliance_test.go: 5 cases covering missing fields,
preserved real values, explicit null, invalid JSON, empty input.
- iceberg_layout_test.go: 3 groups (16 subtests) covering real-world
manifest names from Flink/Spark/Iceberg, security boundary
(subdirectories, bad extensions), and data-file regression.
* fix(s3tables/iceberg): preserve metadata key order and keep config field stable
Two small follow-ups on the spec-compliance fix:
* ensureMetadataSpecCompliance now splices missing keys in at the byte
level just before the closing brace, so iceberg-go's struct-declared
key order survives the backfill. The previous unmarshal/remarshal
through map[string]json.RawMessage silently alphabetized every key in
the document, which is spec-legal but breaks byte-equality fixtures
and any downstream hashing of the persisted metadata. The slower
remarshal path is kept for the rare explicit-null replacement case.
* LoadTableResult.MarshalJSON now serializes Config without omitempty,
matching the struct field tag. The custom marshaler had silently
flipped the tag to ,omitempty, which made the "config" key disappear
from the response whenever s3Endpoint was unset (since
buildFileIOConfig returned an empty but non-nil Properties map).
Tests:
- PreservesOriginalKeyOrder pins the byte-level output against
iceberg-go's emitted shape; would have caught the alphabetization
regression.
- EmptyObjectBackfilled covers the {} -> sentinels-only case (no
leading comma).
- AllPresentReturnsSameBytes confirms the no-op path returns input
bytes unchanged, with whitespace intact.
- iceberg_layout_test pins the catch-all $ anchor: metadata/file.avro.txt
must still be rejected.
* fix(s3tables/iceberg): guard ensureMetadataSpecCompliance against top-level null
json.Unmarshal of a JSON `null` literal succeeds but leaves the map nil.
The current byte-append path no-ops gracefully on this input, but the
slow remarshal path would panic with "assignment to entry in nil map"
if the input ever combined `null` with the explicit-null detection. Add
an explicit nil-map short-circuit so the safety property is obvious
from the source, and a test that pins the contract.
* test(s3tables/iceberg): assert full byte equality in AllPresentReturnsSameBytes
The prefix check only caught a missing "{\n " opener, so the test
would have passed even if the function silently reordered keys or
collapsed whitespace later in the document. Switch to a full string
comparison so any future regression in the no-op path is loud.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(filer/postgres): default to ON CONFLICT upsert to keep tx alive
A KvPut from the inode-index secondary write could fail with 23505
(duplicate key) inside a rename's transaction, after which the next
statement returned 25P02 and rename surfaced to FUSE as EIO. Default
the postgres upsert query when enableUpsert=true so INSERTs are
idempotent; the enableUpsert=false escape hatch is preserved for
non-PG-compatible backends.
* fix(filer/mysql): default to ON DUPLICATE KEY UPDATE upsert
Same shape as the postgres default: when enableUpsert=true but no
upsertQuery is configured, install a sensible default so the
inode-index KvPut does not waste a duplicate-key roundtrip on every
entry write. Uses the VALUES() form so the default works on MariaDB
and MySQL >=5.7; the MySQL 8.0.19 row-alias form is left to explicit
config.
* fix(filer): default enableUpsert=true for sql stores
The default-template fallback only kicks in when enableUpsert=true,
so minimal configs that omit the flag entirely were still exposed.
Default it on for postgres/postgres2/mysql/mysql2; an explicit false
in filer.toml still wins because SetDefault only fills absent keys.
fix(remote_storage/gcs): forward entry.Attributes.Mime as ContentType
Same gap as the S3 client: filer.remote.sync to GCS never populated
the object's ContentType, so HTML/CSS/etc. ended up stored as the GCS
default and didn't render correctly in browsers.
Mirrors the existing Azure client behavior
(weed/remote_storage/azure/azure_storage_client.go).
* fix(replication/s3sink): forward entry.Attributes.Mime as ContentType
Same gap as the remote_storage S3 client: filer.replicate uploads via
s3manager.Uploader without populating ContentType, so replicated objects
on S3-compatible backends (e.g. Backblaze B2) store binary/octet-stream
and browsers refuse to render HTML, CSS, etc.
Pass entry.Attributes.Mime through to UploadInput.ContentType, leaving
the header unset when no Mime is recorded so the remote keeps its own
default.
* fix(replication/s3sink): nil-guard entry.Attributes when reading Mime
* Revert "fix(replication/s3sink): nil-guard entry.Attributes when reading Mime"
This reverts commit 08c3698e44.
The function already dereferences entry.Attributes.Mtime and
entry.Attributes.Md5 unconditionally on the same path, so a nil guard
on Mime alone is inconsistent and provides no real safety.
fix(remote_storage/s3): forward entry.Attributes.Mime as ContentType
filer.remote.sync was uploading every object without a Content-Type, so
S3-compatible backends (e.g. Backblaze B2) stored binary/octet-stream
and browsers refused to render HTML, CSS, etc.
Pass entry.Attributes.Mime through to UploadInput.ContentType, leaving
the header unset when no Mime is recorded so the remote keeps its own
default behavior.
LastIndex returns -1 when the separator is missing and can return any
position when both are present. A path like /vol/file.jpg,abc gives
dotSep<commaSep, so path[commaSep+1:dotSep] slices with start>end and
panics. Only treat the dot as an extension boundary when it sits after
the comma.
* fix(util): guard BytesToUint{16,32,64} against short input
length is computed as uint, so length-1 on an empty slice underflows
to MaxUint and the loop indexes b[0] on a zero-length slice. BytesToUint16
also indexed b[0]/b[1] with no length check. All call sites today gate
the slice length explicitly, so this hardens the API for new callers
rather than fixing a live crash.
Return 0 on short input, matching the existing variable-length contract.
* BytesToUint16: match variable-length contract of the 32/64 helpers
A 1-byte slice should return uint16(b[0]) rather than 0, matching how
BytesToUint32 and BytesToUint64 treat short input.
* fix(vacuum): batch all replicas in a single plugin worker task
The plugin worker vacuum path emitted one TaskDetectionResult per
(volume, server) replica, but the dispatcher gates duplicate tasks per
volume via ActiveTopology.HasAnyTask. The first replica's task was
created and the remaining N-1 replicas were silently dropped, so only
one replica per volume was ever vacuumed — leaving the others with all
their garbage intact.
Mirror the master built-in flow (topology.vacuumOneVolumeId →
batchVacuumVolumeCheck/Compact/Commit/Cleanup) by:
- aggregating detection metrics by VolumeID so a single task carries
every replica in TaskParams.Sources
- having VacuumTask accept []string servers (instead of a single
string), re-check each replica's garbage ratio at execute time to
derive a vacuumTargets subset, and run Compact/Commit/Cleanup against
only that subset
- updating the dispatcher (plugin_handler.Execute, register.CreateTask)
to forward every Sources node to NewVacuumTask
* fix(vacuum): run all-replica vacuum in two phases to keep failure atomic
The prior implementation iterated Compact → Commit → Cleanup against
each replica in sequence. A Compact failure on the second replica left
the first one already committed (its active files swapped with the
.cp* files), producing replica divergence with no automatic recovery.
Split performVacuum into two phases, matching topology.vacuumOneVolumeId:
Phase 1 — Compact all targets. If any fails, run VacuumVolumeCleanup
on every target to drop the .cpd/.cpx/.cpldb temp files, then abort.
No replica has swapped yet, so every replica returns to its original
state.
Phase 2 — Commit all targets. Best-effort, matching
batchVacuumVolumeCommit: per-replica errors are collected and
surfaced together. Once any replica has swapped there is no clean
rollback, so a partial Phase 2 failure requires operator
reconciliation.
Adds compactOne / commitOne / cleanupOne / cleanupAll helpers and
removes the old performVacuumOne.
* fix(vacuum): abort when any replica's garbage check fails
The prior check tolerated per-replica RPC errors and only failed the
task if every replica errored — partial failures were silently treated
as "ineligible" so the responding replicas would still be vacuumed.
That produces divergence the moment the unreachable replica comes
back: it still carries the original garbage while the others have
been compacted.
Match topology.batchVacuumVolumeCheck's contract instead — its return
value (errCount == 0 && len(vacuumLocationList.list) > 0) gates the
whole vacuum on every replica's check succeeding. If any replica is
unreachable or its VacuumVolumeCheck RPC errors, abort the task; the
volume will be retried on the next detection cycle once the replica
is healthy.
* fix(vacuum): guard against nil metrics and TaskSource entries
Detection's bucket-building loop dereferenced m.VolumeID without
checking m for nil. VacuumTask.Validate built sourceSet from
params.Sources without checking each entry for nil. Both paths would
panic on a malformed protobuf payload that managed to deliver a nil
slot. Skip nil entries in both loops — neutral with the existing
nil/empty filtering already done in register.CreateTask and
plugin_handler.Execute.
* test(vacuum): success path no longer calls VacuumVolumeCleanup
The plugin worker vacuum is now two-phase (Compact-all → Commit-all,
with Cleanup only invoked on Compact failure to roll back .cp* temp
files). This matches topology.vacuumOneVolumeId, where
batchVacuumVolumeCleanup runs only on the Compact-failure branch.
On a successful Commit the temp files do not linger:
- CommitCompactVolume renames .cpd → .dat and .cpx → .idx
- leveldb needle map renames .cpldb → .ldb (needle_map_leveldb.go)
so calling VacuumVolumeCleanup afterwards is a redundant no-op. The
prior worker code called it unconditionally and the integration test
asserted that — switch the expectation to cleanupCalls == 0 to
document the new (and master-aligned) contract.
* fix(filer.sync): resolve manifest chunks against source filer
`UpdateEntry` was passing `filer.LookupFn(fs)` — the sink filer client —
into `compareChunks`. But `oldEntry`/`newEntry` chunks come from the
source cluster, so manifest resolution must hit the source filer's
volume servers. With two clusters that have overlapping volume IDs
(common once they grow past a few hundred volumes), the sink lookup
returns its own volume's URLs and the fetch 404s on the source's
fileKey:
compare chunks error: fail to read manifest 631,0babe...: 404 Not Found
The 404 aborts the diff, the manifest chunk never gets replicated, and
the target ends up with whatever flat chunks happened to land from
earlier partial syncs — visible as `SIZE_MISMATCH` in filer.sync.verify
on files large enough to use chunk manifests (~150 GB+ in practice).
Only the manifest path was wrong; flat-chunk reads in `fetchAndWrite`
already use `fs.filerSource.ReadPart`.
* trim comment
* test(filer.sync): regression test for source-filer manifest lookup
Two recording filer gRPC servers stand in for source and sink. Driving
UpdateEntry with a manifest chunk and observing which one receives
LookupVolume proves compareChunks routes source-side lookups through
fs.filerSource, not fs. Reverting the fix flips the call onto the sink
filer and fails the assertion.
* drop test
* fix(filer.sync): validate chunk size in FilerSink to prevent 0-byte propagation
FilerSink.fetchAndWrite previously trusted the source response and the
upload result blindly: a 200 OK / Content-Length: 0 reply from a broken
source volume was happily uploaded as a 0-byte needle to the destination,
and the destination filer metadata was then written with the source
chunk size. The result was permanent silent corruption -- ls shows the
file at its original size but reads fail with EIO.
Add two cheap defenses inside fetchAndWrite:
1. After assembling fullData, compare its length against sourceChunk.Size.
2. After a successful upload, compare uploadResult.Size against
sourceChunk.Size.
Both checks wrap a new sentinel errChunkSizeMismatch that the retry
callback recognizes and refuses to retry -- needle.size=0 on disk is a
persistent state, not a transient network error, so the sync should stop
loudly on the affected entry instead of looping or, worse, silently
propagating it.
Tests:
* TestValidateReplicatedChunkSize -- table-driven coverage of healthy,
legitimately empty, zero-byte read, short read, and truncated upload
cases.
* TestFetchAndWriteRejectsZeroByteSource -- end-to-end: an httptest
source that returns 200 OK with an empty body must cause fetchAndWrite
to return errChunkSizeMismatch after exactly one source hit (fail
fast, no retry storm).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* filer.sync: bubble size-mismatch past CreateEntry/UpdateEntry
Three follow-ups on the chunk-size validation:
- Use %w in replicateOneChunk so the errChunkSizeMismatch sentinel
survives the wrap and reaches errors.Is callers up the stack.
- In FilerSink.CreateEntry/UpdateEntry, surface errChunkSizeMismatch
instead of warning-and-nil. Other errors (deleted source chunk,
transient network) keep the existing swallow so a hiccup doesn't
stall the stream.
- Drop validateReplicatedUploadSize: uploadResult.Size is set
client-side from the same len(fullData) we already validated
pre-upload, so the second check can't fail.
Test: scope the RetryWaitTime override to the one test that needs it,
add a regression that locks in the errors.Is chain through
replicateChunks.
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* wdclient: prune filers dropped from master discovery
Filer discovery only appended new addresses; it never removed ones that
disappeared from the master snapshot. After a K8s filer pod rolled to a
new IP the old address lingered in filerAddresses and got retried again
every resetTimeout window, stalling S3 uploads on i/o timeouts.
Treat the master snapshot as authoritative: keep survivors (preserving
their health counters and the active round-robin index), append newcomers
with fresh health, drop the rest. Empty snapshots are still ignored so a
transient master outage can't wipe the list.
* wdclient: skip discovery snapshots with no usable addresses
Guard against the defensive case where master returns updates whose
addresses are all empty; reconciling against an empty discovered set
would prune every filer.
* fix(volume): avoid nil-deref when needle map loader errors
A corrupt .idx whose size is not a multiple of NeedleMapEntrySize sends
the read-only load path into NewSortedFileNeedleMap, which returns
(*SortedFileNeedleMap)(nil) when reverseWalkIndexFile rejects the file.
The multi-value assignment `v.nm, err = NewSortedFileNeedleMap(...)`
parks that typed-nil pointer in the v.nm NeedleMapper interface, so the
subsequent `v.nm != nil` guard still passes — and the post-load
MaxNeedleEnd structural check dispatches through the promoted mapMetric
accessor on a nil receiver, segfaulting the whole volume server at
load time.
Reset v.nm explicitly after every loader failure so the interface is
truly nil, and skip the MaxNeedleEnd check when err is non-nil since
the value would come from a partial walk anyway. NewLevelDbNeedleMap
has the same typed-nil-on-error shape and is fixed the same way.
* fix(volume): close indexFile when needle map load errors
Pre-fix the typed-nil v.nm path either leaked indexFile silently
(SortedFileNeedleMap.Close had a nil-receiver early return) or crashed
(LevelDbNeedleMap.Close had no such guard). With v.nm cleared to nil
on error, the defer cleanup no longer calls Close at all, so the
LoadCompactNeedleMap success-with-error path now also leaks indexFile.
Close indexFile explicitly on each loader error to keep ownership
balanced.
* trim comments
Random allocation could pick 33646 = admin.port (23646) + GrpcPortOffset.
weed mini reserves that as Admin's gRPC port even when the test only
overrides Master/Filer/S3/Iceberg, so the explicit Filer flag failed
with "reserved for gRPC calculation" and TestRisingWaveIcebergCatalog
flaked. Pre-seed the reserved set with every mini default HTTP port
plus its +10000 offset so a random pick (or its own gRPC offset) cannot
land on a service the caller left at its default.
* master: timeout AllocateVolume/DeleteVolume and defer growRequest cleanup
The volume-grow goroutine clears the layout's growRequest flag only after
ms.DoAutomaticVolumeGrow returns, and AllocateVolume / DeleteVolume were
calling the volume-server RPC with context.Background(). A volume server
that hung mid-call (heavy I/O, stuck lock, dead peer behind a stable VIP)
would park the goroutine forever, leaving growRequest=true and silently
blocking every subsequent automatic grow for that layout — Assign retries
then drained their 30s budget with "context deadline exceeded" until the
operator restarted the master.
Bound both RPCs with a 5-minute deadline (creating/removing a volume is
sub-second normally, generous for contended disks) and move the flag
clear + filter delete into defers so a panic in DoAutomaticVolumeGrow
doesn't strand the layout either.
* allocate_volume: shorten timeout to 1m for faster recovery
Volume create/delete is sub-second under normal conditions; 1 minute is
generous even on a contended disk and clears the growRequest flag well
before too many client Assigns drain their own retry budget.
* trim comments
KvPut/KvGet/KvDelete bypassed store.getKey(), so filer.store.id and
other KV writes landed outside the configured prefix. With a Redis
ACL restricted to the prefix this errored with NOPERM; without the
ACL the keys silently lived in the wrong namespace.
* writeJson: drop unused JSONP branch
No in-tree caller uses ?callback=. Always serve application/json
with X-Content-Type-Options: nosniff.
* seaweed-volume: drop unused JSONP branch
Mirror Go: always serve application/json with
X-Content-Type-Options: nosniff.
* writeJson: drop unreachable StatusNotModified check
bodyAllowedForStatus already returns early for 304.
* test/volume_server: rename and rewrite JSONP test to assert callback is ignored
CI: /status?callback=myFunc now returns plain application/json
with X-Content-Type-Options: nosniff.
* s3,iceberg: reject `..`/NUL in URL path vars
Both gateway routers use mux.NewRouter().SkipClean(true), so a request like
`GET /bucket-A/../evil-bucket/key` survives routing as bucket=bucket-A,
object=../evil-bucket/key. The captured key is then joined into a filer path;
util.JoinPath / path.Join collapse the `..` server-side and the read lands in
evil-bucket. With auth on, IAM still authorizes against bucket-A (the mux var),
so policy is evaluated against the wrong target.
Add a middleware on the S3 bucket subrouter and the Iceberg REST router that
rejects any `.`, `..`, NUL, or — for single-segment slots — embedded slash in
the captured path vars before any handler runs. NormalizeObjectKey already
folds `\` to `/` and decoding happens in mux, so `%2e%2e` and `..\` are caught.
* s3,iceberg: reject empty captured vars and empty namespace parts
Comma-ok the var lookup so we only check captured slots, then treat an empty
captured value as a rejection on its own — downstream path.Join would
otherwise collapse it and let the next segment pick the bucket.
For iceberg, also reject empty parts after splitting the namespace on \x1F so
leading/trailing/consecutive unit separators (which parseNamespace silently
folds out) don't let distinct route values collapse to the same parsed
namespace.
Register loggingMiddleware before validateRequestPath on the iceberg router
so rejected requests still produce an audit-log line.
Adds two FUSE integration tests on the existing dlm cluster harness (the
-dlm mounts route advisory locks to the owner filer):
- TestPosixLockCrossMount: an flock taken on one mount blocks the other,
and is grantable after release — the routed-to-owner path end to end.
- TestPosixLockSurvivesFilerLoss: hold flocks on many files, stop filer1
so keys it owned migrate to filer0; after the ring settles and the
holding mount re-asserts, every lock is still honored. Asserts only the
settled state; the transient migration window is unit-covered.
Locks are taken on read-only fds so the -dlm whole-file write lock (a
different mechanism, held until close) isn't involved. Skipped on
non-Linux: only Linux forwards advisory locks (SETLK) to the FUSE server;
macFUSE handles flock in-kernel per mount.
The codec (Set.Marshal/Unmarshal) and its posix_lock.proto were built to
let the lock set ride in an inode's entry metadata, but the authority is
in-memory and ownership handoff/restart is handled by mounts re-asserting
their held locks over the RPC — neither serializes the set. Nothing calls
the serde outside its own tests, so drop it (codec, proto, generated pb,
Makefile). The in-memory Set/Manager are unchanged.
After a (re)start the owner defers would-be grants for posixLockWarmup
while mounts re-assert, trusting only locally-visible conflicts, so it
does not double-grant from empty state; a deferred grant is a retry for
SetLkw and EAGAIN for non-blocking SetLk, never a spurious grant. Cooling
now fail-closes: if the previous owner is unreachable during a ring
change, defer rather than risk a double-grant. readyAt is atomic so the
handler reads it without locking.
While the ring changed within the last snapshot interval, a fresh owner
asks the key's previous owner (LockRing.PriorOwner) whether it still
holds a conflicting lock before granting TRY_LOCK or answering GET_LK, so
it does not double-grant before re-assertion rebuilds its local state.
The probe is marked cooling_probe so the previous owner answers from
local state without recursing. PriorOwner uses the snapshot's prebuilt
ring rather than rebuilding a hash ring per call.
* mount: renew POSIX lock leases via keepalive
The mount tracks the inode keys it holds locks on and a background loop
renews its session lease (KEEP_ALIVE) with each key's owner filer every
5s, within the filer's 15s TTL. A live mount is never reaped; a dead one
stops renewing and owners reclaim its locks. Tracking is a superset:
holds are added on grant and dropped only on owner release, so a still
held lock is never under-renewed.
* mount,filer: re-assert held POSIX locks via keepalive
The owner filer holds POSIX advisory locks as in-memory soft state, so a key's
owner change (ring rebalance) or an owner restart lost or stranded them: the new
or restarted owner was blind to existing holders and would double-grant.
Make the keepalive carry the mount's held lock ranges per key. The mount mirrors
its own granted locks (posixOwn), and each tick re-asserts them to the key's
current owner, which rebuilds that session's locks from the assertion — self
-healing after a takeover or restart. The owner arbitrates re-asserted locks
against other sessions so it never double-grants; a lock that lost a migration
race is reported, not forced. A bare keepalive (no ranges) still just renews.
* filer: session lease + reaping for POSIX locks
A mount renews its session lease by keepalive (new KEEP_ALIVE op); the
owner filer records last-seen per session and a background sweeper reaps
the locks of leased sessions that stop renewing — a dead or partitioned
mount. Only sessions that have renewed are leased, so this is inert until
mounts run with -posixLock.
* mount: route POSIX advisory locks to the owner filer (-posixLock) (#9665)
mount: route POSIX advisory locks to the owner filer under -dlm
With -dlm, GetLk/SetLk/SetLkw and the flush/release cleanup paths go to
the inode's owner filer via the PosixLock RPC instead of the local table,
so flock/fcntl are honored across mounts. Advisory locking rides the same
switch as whole-file write coordination — and is therefore off under
writeback cache, which implies single-writer. The mount calls its filer
and relies on filer-side forwarding to reach the owner. Keys are the inode
identity (HardLinkId else path); SetLkw is client-side polling with the
FUSE cancel channel (no server wait queue); a per-mount session id
namespaces owners; a local hint avoids a release RPC on every close.
* mount,filer: bound posix-lock release RPCs and stop the reaper on shutdown
The unlock/release RPCs run off the syscall path (close/flush) and used
context.Background() with no deadline, so a slow or unreachable filer could
hang close() indefinitely; bound them to 5s (they still aren't cancelled by
an interrupt). The lease-reaping sweeper now selects on a stop channel that
FilerServer.Shutdown closes, instead of looping for the process lifetime.
routedReleasePosixOwner dropped the local owner hint before sending
RELEASE_POSIX_OWNER, so a transient RPC failure left the lock held on the
owner filer with no local record to retry from — stranded until session-lease
reaping. Drop the hint only after a successful release; on failure keep it so
a later flush retries, with lease reaping as the backstop.
With -dlm, GetLk/SetLk/SetLkw and the flush/release cleanup paths go to
the inode's owner filer via the PosixLock RPC instead of the local table,
so flock/fcntl are honored across mounts. Advisory locking rides the same
switch as whole-file write coordination — and is therefore off under
writeback cache, which implies single-writer. Keys are the inode identity
(HardLinkId else path); SetLkw is client-side polling with the FUSE cancel
channel (no server wait queue); a per-mount session id namespaces owners;
a local hint avoids a release RPC on every close. Background unlock/release
RPCs are bounded so a stuck filer can't hang close().
* mount: hold the entry lock while reading chunk size in GetAttr/SetAttr
Async upload workers append chunks to an open handle's shared entry under
the LockedEntry lock (FileHandle.AddChunks), but GetAttr and SetAttr
computed FileSize by iterating entry.Chunks without taking it. A concurrent
append that reallocated the backing array tore the slice read and crashed in
filer.TotalSize. Surfaces with -writebackCache, where handles stay open and
flush asynchronously while metadata ops keep arriving.
Take the LockedEntry lock for those reads (and SetAttr's truncate rewrite).
* mount: re-read entry under the lock in GetAttr/SetAttr
If SetEntry swapped the handle's entry pointer between maybeReadEntry and the
lock acquisition, the old pointer is orphaned. Re-read fh.entry.Entry under
the lock so SetAttr mutates the live entry instead of losing the update, and
GetAttr reports the current one.
* mount: cover the truncate path in TestAttrChunkRace
Alternate SetAttr between mtime-only and a shrinking size so the test also
exercises the entry.Chunks rewrite under fh.entry.Lock, not just the read-side
size walk.
* mount: snapshot chunks under the entry lock on the read path
readFromChunks holds fh.entryLock (excludes SetAttr) but not the LockedEntry
lock the async uploader appends under, so IsInRemoteOnly, the FileSize
fallback, and the RDMA/peer chunk walks read entry.Chunks while AddChunks
reallocated it — the same torn-slice crash as GetAttr/SetAttr.
Snapshot size, inline content, and the chunk list under a brief LockedEntry
RLock, then hand the snapshot to the RDMA/peer helpers instead of holding the
lock across network I/O. The captured slice stays valid: append never mutates
the old backing array, and truncate is excluded by the fh.entryLock.
* filer: in-memory POSIX lock authority (Manager)
Concurrent multi-inode authority over the per-inode Set: a Set per opaque
inode key (path, or hl:<HardLinkId>) plus a session->keys index so a dead
mount's locks reap in O(locks held). Lock state stays in memory like the
distributed lock manager's, off the replicated meta-log. TryLock/Unlock/
GetLk/ReleasePosixOwner/ReleaseFlockOwner/ReleaseSession; empty sets and
stale index entries are pruned on release.
* filer: routed PosixLock RPC over the in-memory authority
Adds the PosixLock RPC (try/unlock/get_lk + the flush/release owner
drops) that the owner filer answers from its in-memory Manager. The
request key is the inode identity ring key; a non-owner filer forwards
one hop (is_moved-bounded), mirroring ObjectTransaction, so the owner's
table stays the single authority under a stale ring view. Strictly
non-blocking; SetLkw polling lives in the mount.
Concurrent multi-inode authority over the per-inode Set: a Set per opaque
inode key (path, or hl:<HardLinkId>) plus a session->keys index so a dead
mount's locks reap in O(locks held). Lock state stays in memory like the
distributed lock manager's, off the replicated meta-log. TryLock/Unlock/
GetLk/ReleasePosixOwner/ReleaseFlockOwner/ReleaseSession; empty sets and
stale index entries are pruned on release.
* filer: POSIX advisory lock set primitive (phase 1)
Pure per-inode conflict/coalesce/range-split logic for fcntl byte-range
and flock whole-file locks, extracted from the mount's PosixLockTable
without its wait queue or inode-map concurrency. Owner identity is
(Sid, Owner) so the same FUSE owner on different mounts never aliases,
and ReleaseSession reaps a dead mount's locks. The owner filer will hold
one Set per inode under the per-path lock; no concurrency control here.
* test: tolerate transient FUSE invisibility in ConcurrentReadWrite
A concurrent truncating overwrite leaves a short-lived dentry/cache window
where the file is momentarily ENOENT to another opener. Retry the reads and
writes a few times before failing, as ConcurrentDirectoryOperations does.
* filer: serialize the POSIX lock set for entry metadata
Versioned fixed-width binary encoding of a Set, so an inode's held locks
can ride in its entry metadata: a lock op materializes the Set from the
blob, applies under the per-path lock, and writes it back. Empty set
encodes to nil so a lock-free inode carries no blob.
* filer: encode the POSIX lock set as protobuf
Replace the hand-rolled fixed-width codec with a LockSetProto message, so the
metadata blob can gain fields without a format-version migration. proto.Unmarshal
already rejects a malformed blob, so the explicit version and length checks go
away. Marshal now returns an error to match.
* filer: POSIX advisory lock set primitive (phase 1)
Pure per-inode conflict/coalesce/range-split logic for fcntl byte-range
and flock whole-file locks, extracted from the mount's PosixLockTable
without its wait queue or inode-map concurrency. Owner identity is
(Sid, Owner) so the same FUSE owner on different mounts never aliases,
and ReleaseSession reaps a dead mount's locks. The owner filer will hold
one Set per inode under the per-path lock; no concurrency control here.
* test: tolerate transient FUSE invisibility in ConcurrentReadWrite
A concurrent truncating overwrite leaves a short-lived dentry/cache window
where the file is momentarily ENOENT to another opener. Retry the reads and
writes a few times before failing, as ConcurrentDirectoryOperations does.
A disconnect/reconnect race could drop a volume from vid2location while it stayed in the data node's disk map, so it showed in volume.list and the admin UI but LookupVolume returned "volume id not found" and never self-healed (the full heartbeat only registered volumes new to the disk map). The full heartbeat now re-registers any reported volume missing from the lookup index, reusing the already-resolved VolumeLayout.
A non-owner filer forwards the whole transaction to the ring owner of route_key, so the owner's per-path lock stays the single serialization point even when the caller's ring view is stale. is_moved bounds forwarding to one hop. The gateway stamps route_key on every routed builder via the shared objectRouteKey helper. Completes taking S3 object mutations off the distributed lock.
* admin: add -metricsPort flag to expose Prometheus metrics
The admin command had no metrics endpoint, so passing -metricsPort
(as the operator does for spec.admin.metricsPort) crashed the process
with "flag provided but not defined". Wire up -metricsPort/-metricsIp
and start the shared Prometheus metrics server, matching filer, master,
and volume.
* admin: emit maintenance task and worker fleet metrics
Add Prometheus metrics for the admin server's distinctive work: the
maintenance task queue and the worker fleet that executes it.
Task lifecycle: maintenance_tasks_by_status / _by_type gauges (snapshot
of the queue), maintenance_tasks_completed_total{type,outcome} counter
and maintenance_task_duration_seconds{type} histogram (recorded when a
task reaches a terminal state), and last/next scan timestamp gauges.
Worker fleet: workers_connected and worker_slots{used,max} gauges, plus
worker_events_total{event} counting register/unregister/stale removals.
Gauges are snapshotted by a background goroutine on the admin server;
counters and the histogram are recorded at their event sites.
* admin: read worker slot totals under lock, clear next-scan gauge when idle
GetWorkers returns live worker pointers; summing CurrentLoad/MaxConcurrent
outside the queue lock races with task assignment and completion. Add
GetWorkerSlotTotals to aggregate under the lock.
Also reset maintenance_next_scan_timestamp_seconds to 0 when the scanner
is not running, so it can't retain a stale value after a stop.
Probe one throwaway write once per process before the lifecycle tests run, absorbing the post-start volume-growth window so the first real PutObject doesn't race volume growth and 500. Each call is bounded by the remaining 60s budget; CreateBucket is retried within it.
A non-versioned metadata-only self-copy (CopyObject with source == destination
and the REPLACE directive) is a read-modify-write of one entry, which is why it
held the distributed lock. It now routes to the owner as a serialized
PATCH_EXTENDED: the owner merges the new managed metadata (set the replacements,
delete the dropped keys) onto a fresh read of the entry under its per-path lock,
so a concurrent change to non-managed keys (legal hold, retention, version id) is
preserved instead of clobbered, and bumps mtime.
PATCH_EXTENDED gains touch_mtime for the mtime bump. Versioned and suspended
self-copies create a new version (already routed via the copy finalize) and the
no-owner bootstrap keep the lock.
A version-specific DELETE (real version or the null version, including
object-lock WORM-checked ones and governance-bypass) now runs as one routed
transaction on the object's owner instead of holding the distributed lock.
For a real version: recompute the .versions pointer excluding the version
(repoint-before-delete, so a crash leaves a recoverable orphan rather than a
dangling pointer), then delete the version file, under the object's per-path lock.
The null version is the regular object entry, deleted directly (no pointer).
Object-lock buckets gate the delete on the version's WORM guards evaluated on the
owner: legal hold (always) + retention (while not elapsed). Governance bypass
scopes the retention guard to COMPLIANCE mode, so the filer allows a
governance-mode delete while still denying compliance and legal hold — the
gateway never reads the version.
Three primitives make this expressible:
- ObjectTransaction.condition_key: evaluate the condition against a named entry
(the version) while the lock stays on lock_key (the object).
- Recompute.exclude_name: omit a child from the scan, to repoint before delete.
- WriteCondition.Clause gate_key/gate_value: scope IF_EXTENDED_TIME_ELAPSED to a
mode, expressing governance bypass without a gateway-side read.
completeMultipartUpload routes its writes to the object's owner filer when an
owner is known, off the distributed lock. Idempotent replay is handled
gateway-side in prepareMultipartCompletionState (it returns the existing result
when the object already carries this UploadId), so the lock is not needed to
dedupe retries; with no owner yet, the lock remains as the bootstrap path.
Versioned completion flips the .versions pointer via routedVersionedFinalize
(RECOMPUTE_LATEST). Non-versioned and suspended completion write the object via
routedMkFile (a routed PUT) so the write serializes with concurrent writes to
the same key on the owner's per-path lock. The version file itself is a unique
path and stays a plain mkFile.
s3: route versioned/suspended delete markers and versioned COPY off the lock
createDeleteMarker flips the .versions pointer via routedVersionedFinalize
(RECOMPUTE_LATEST on the owner filer) when an owner is known, so an Enabled or
Suspended DeleteObject takes its pointer flip off the distributed lock; the
delete marker file is written first and the owner re-derives the pointer.
DeleteObjectHandler routes a versioned/suspended delete with no specific version
straight to the owner, off the lock. A specific-version delete and object-lock
buckets keep the lock (the former needs a recompute-after-delete handled
separately; the latter needs gateway-side enforcement).
CopyObject into a versioned bucket finalizes the new version through the same
routed pointer flip.
routableWriteOwner no longer excludes object-lock buckets, so a versioned PUT
(which creates a new version, never overwriting a locked one) and a
non-versioned overwrite (WORM-checked gateway-side before dispatch) route to the
owner filer like any other write.
routedObjectOwner still excludes object-lock: an unversioned object-lock delete
enforces WORM under the lock, so it stays there rather than routing past the
check. Version-specific deletes likewise stay on the lock — routing them needs
the WORM check (on the version entry) and the latest-pointer recompute (on the
object) under one transaction, which the current single condition target cannot
express.
s3: route versioned PutObject finalize off the distributed lock
A versioned write's finalize (flip the .versions pointer to the newest version,
demote the prior latest) now runs as a single RECOMPUTE_LATEST ObjectTransaction
on the object's owner filer, under its per-path lock, instead of the unserialized
updateLatestVersionInDirectory. The version file is written first; the owner
re-derives the pointer by scanning the directory.
RECOMPUTE_LATEST gains size_to_key / mtime_to_key to cache the chosen version's
size and mtime on the pointer, and demote_key / demote_value to stamp the
displaced prior latest (NoncurrentSinceNs for lifecycle) when the pointer moves.
Falls back to updateLatestVersionInDirectory when no owner is known yet.
PutBucketVersioning and PutBucketEncryption ran concurrently each did a
whole-entry read-modify-write of the bucket entry, so one could overwrite the
other's field with a stale copy. Each config write is now a field-level
PATCH_EXTENDED (extended attributes) or set_content (the metadata blob)
ObjectTransaction, routed to the bucket's owner filer and merged onto a fresh
read under its per-path lock. Disjoint fields no longer clobber each other.
s3: route non-versioned object PUT and DELETE off the distributed lock
A non-versioned, non-object-lock object write now goes straight to the key's
owner filer as a single-mutation ObjectTransaction, which serializes it with the
owner's per-path lock and evaluates the precondition, instead of taking a
cluster-wide lock. PUT and DELETE use the object's full path as the lock key, so
a concurrent create and delete of the same key serialize against each other.
The fast path is taken only when the precondition reduces to clauses the filer
can evaluate (existence and a single strong-ETag match); time-based conditions,
ETag lists, weak ETags, post-create hooks, and an unknown owner fall back to the
lock. A routed mutation error other than a failed precondition also falls back,
so the lock path stays the authority for the cases it alone covers.
PrimaryForKey returns "" until the ring view arrives, keeping writes on the lock
until routing is known.
* s3: dial the object lock's primary filer directly
The S3 object write lock builds a fresh short-lived lock per write, each
starting at the seed filer. When the seed isn't the key's hash-ring primary
the filer forwards the request to the primary, and in multi-cluster setups
that forward crosses clusters on every write.
Give the lock client a view of the filer lock ring, fed by the master's
LockRingUpdate broadcasts the gateway already receives, so it dials the
primary directly. The view tracks filer membership by version; a stale view
stays correct because the filer still forwards as a fallback.
Also send the initial ring snapshot to S3 clients, not just filers.
* s3: subscribe to lock-ring updates before starting the master loop
The master delivers the initial LockRingUpdate once, on connect. Registering the
callback after KeepConnectedToMaster started left a window where that first
update could arrive before the handler was set and be dropped, delaying the ring
view until the next membership change. Build the lock client and register the
callback in the masters block before launching the loop; the filers block reuses
that client (or creates a plain one when no masters are configured).
* lock_manager: build the hash ring in a deterministic server order
rebuildRing ranged over the server set (a map), whose iteration order is
randomized per process. On a vnode hash collision the last writer into
vnodeToServer wins, so two nodes holding the same server set could resolve the
collision to different servers and disagree on the primary for keys near that
slot. Now that the S3 gateway also computes PrimaryForKey, such a disagreement
would route the same key to different filers and defeat per-path serialization.
Iterate the servers in sorted order so the ring is identical on every node with
the same set, regardless of discovery order.
* lock_manager: skip redundant ring rebuilds, trim comments
SetRing now ignores a non-zero version at or below the current one once a ring
exists, so repeated LockRingUpdate broadcasts on reconnect no longer rebuild the
ring.
* s3: hold the lock-ring client on the server for route-by-key
Store the object-write lock client on S3ApiServer so handlers can resolve a
key's owner filer via PrimaryForKey.
2026-05-24 00:40:43 -07:00
Chris LuGitHubgemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* filer: let PATCH_EXTENDED replace Entry.content
PATCH_EXTENDED merges extended attributes under the per-path lock, reading the
entry fresh, so concurrent patches to different keys don't clobber each other.
Some single-key state lives in Entry.content rather than an extended attribute
(e.g. the S3 bucket metadata blob). Add set_content/content to the mutation so a
patch can replace content the same way -- read fresh, set content, preserve the
rest -- letting a content write and an extended-attribute write on the same
entry serialize on the lock instead of racing whole-entry rewrites.
* Update weed/server/filer_grpc_server.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* filer: test set_content FileSize sync; note chosen content-patch approach
Cover the FileSize behavior of a set_content patch: a file's size follows the
new content length (including when it shrinks), a directory's stays zero. Also
document, in the bucket-config design, that extending PATCH_EXTENDED with
set_content is the implemented path for content-backed config.
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
CreateEntry starts with a FindEntry to load the current entry. A conditional
CreateEntry already fetched that entry to evaluate the precondition under the
per-path lock, so the create repeated the lookup.
Add an existing *Entry parameter: when non-nil it is used as the current entry
and the internal lookup is skipped; nil keeps the lookup. The gRPC CreateEntry
handler passes the entry it fetched for the precondition, removing the redundant
read while the lock is held. All other callers pass nil.
A multi-object delete spans many keys that route to different owner filers. The
gateway groups keys by owner and sends one batch per owner; the filer applies
each transaction under its own per-path lock, independent of the others.
A failed transaction (precondition or mutation error) is reported in its own
response without aborting the rest, matching S3 multi-object semantics where
each key succeeds or fails on its own. There is no cross-key atomicity, which S3
batch delete does not require.
* s3: use oidc: prefix for trust-policy conditions in IAM example
Trust-policy conditions for AssumeRoleWithWebIdentity see OIDC claims
under the oidc: prefix, so the docker example's bare "roles" key never
matched and denied every web-identity assume against those roles. Switch
the three roles to oidc:roles.
Also document the available trust-policy condition keys (oidc:iss/sub/aud,
oidc:<claim>, aws:FederatedProvider, aws:userid, sts:DurationSeconds) and
note that roleMapping selects the role for direct OIDC bearer auth while
STS uses the explicit RoleArn plus trust policy.
* s3: clarify aws:userid differs between trust policy and request auth
aws:userid is the raw sub claim during trust-policy evaluation, but a
stable sub+iss hash (ComputeParentUser) during S3 request authorization
after the role is assumed. Note both so the two contexts aren't conflated.
Routing object-lock buckets off the distributed lock needs the retention and
legal-hold check to run atomically with the write, under the per-path lock. Move
just the comparison into the filer, not the S3 semantics: two generic clause
kinds on an extended attribute.
IF_EXTENDED_NOT_EQUAL blocks while extended[ext_key] equals ext_value (a legal
hold). IF_EXTENDED_TIME_ELAPSED blocks while extended[ext_key], read as a unix-
second deadline, is in the future against the filer's clock (retention); a
malformed deadline fails safe. The caller composes these from the object-lock
state and, for a governance bypass, simply omits the retention clause once the
bypass is authorized -- the filer makes no authorization decision and keeps no
S3 knowledge.
Deleting a specific version that happens to be the latest needs the new latest
re-derived from the remaining versions, and that scan must run under the same
lock as the delete. The gateway can't do it atomically across RPCs.
Add a RECOMPUTE_LATEST mutation: it scans a directory under the transaction
lock, picks the child that sorts last (descending) or first by name, copies the
mapped extended keys from it into a pointer entry, and stores its name under
name_to_key. An empty directory clears the pointer keys. The filer stays
mechanical and S3-agnostic: the caller, which knows the versioning scheme,
supplies the sort direction and the key mappings. A missing pointer entry is a
no-op, so a replayed transaction is idempotent.
A versioned object write touches several entries that must change together: the
main object, a delete marker or version file, and the latest pointer on the
.versions directory. Holding a distributed lock across separate RPCs to do this
is what the per-path lock was meant to replace, but a single CreateEntry only
covers one entry.
Add ObjectTransaction: a request carries a lock_key (the object path), an
optional WriteCondition, and an ordered list of mutations (PUT / DELETE /
PATCH_EXTENDED). The filer holds the per-path lock on lock_key for the whole
call, checks the condition against the entry at lock_key, then applies the
mutations in order. Callers route the object's writes to its owner filer so the
lock is authoritative across all of the object's entries.
DELETE and PATCH of an absent entry are no-ops, so a replayed transaction is
idempotent. PUT entries are metadata-scoped; data-bearing writes (chunks) are
written before the transaction, as today.
Add an optional WriteCondition to CreateEntryRequest. When set, the filer
evaluates it against the current entry while holding the per-path lock, so the
check and the write are atomic on this filer, and returns PRECONDITION_FAILED
when it does not hold. The caller must route the key's writes to the owner filer
for the check to be authoritative.
A condition is a list of clauses that all must hold (logical AND). One clause is
the common case; several express what a single comparison cannot: an ETag set
(If-Match / If-None-Match with multiple values), weak-ETag comparison, and
compound conditions. ETag comparison mirrors the S3 gateway's precedence (stored
Seaweed ETag attribute, then the Md5/chunk fallback) and follows RFC 7232
strong/weak rules, so results match without coupling the filer to S3 handling.
Condition parsing and evaluation live in filer_grpc_server_condition.go.
CreateEntry is a FindEntry-then-write with no lock, so concurrent creates to the
same path race: OExcl can admit two creators, and a conditional check-then-act
has no atomicity. Add a per-path exclusive lock (util.LockTable, which evicts
idle keys so it stays bounded) on the FilerServer and take it in CreateEntry, so
the existence check and the write are atomic on this filer.
This is the local serialization point that lets callers route a key's writes to
its owner filer and drop the distributed lock for that key. AppendToEntry keeps
its distributed lock for now; it can move to the per-path lock once its callers
route to the owner.
2026-05-23 14:22:42 -07:00
Chris LuGitHubgemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* EC detection: build placement snapshot once per cycle, not per volume
planECDestinations rebuilt the full ecbalancer snapshot (FromActiveTopology) for
every eligible volume, and resolved each shard destination's address via
ResolveServerAddress, which rebuilds the whole node map on every call. Both are
O(volumes x topology) and made detection time out on large clusters
(TestErasureCodingDetectionLargeTopology: 300k volumes hit the 2-minute
deadline).
Build the snapshot and the node-address map once per detection cycle and pass
them in. planECDestinations now reserves the shards it assigns directly into the
shared snapshot, so volumes planned later in the same cycle still see the reduced
capacity (previously this was observed by rebuilding from ActiveTopology's
pending tasks). Large-topology detection drops from a 120s timeout to ~3.5s.
* Update weed/worker/tasks/erasure_coding/detection.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
Delete the EC placement package and the dead encode planner code
Now that encode (and repair) place via ecbalancer.Place, nothing uses the
erasure_coding/placement package or the EC-only planner machinery
(ecPlacementPlanner, diskInfosToCandidates, calculateECScoreCandidate,
distributeECShards) in detection.go. Removes them and the package, along with the
planner-direct unit tests.
* Add shared super_block.ResolveReplicaPlacement; use it in ec_balance
* Add ecbalancer.FromActiveTopology snapshot constructor for EC encode/repair
* Add ecbalancer.Place greenfield/repair placement core (strict + durability-first)
* topology: add GetEffectiveAvailableEcShardSlots; FromActiveTopology uses shard-granular free slots
GetDisksWithEffectiveCapacity flattens reserved shard slots into volume slots via
integer truncation, so an in-flight EC task reserving a non-multiple-of-
DataShardsCount number of shards was lost from the snapshot and freeSlots was
over-reported. GetEffectiveAvailableEcShardSlots subtracts the full reservation
impact at shard granularity.
* ecbalancer.Place: reject nodes without a free disk of the requested type
FromActiveTopology keeps all disk types in the snapshot, so an SSD-only request
could be routed to a node with only HDD capacity (pickBestDiskOnNode then returns
disk 0 on the wrong tier). Filter rack/node selection to those with a free disk
of the requested type.
* ecbalancer.Place: enforce ReplicaPlacement DiffDataCenterCount (per-DC shard cap)
* ecbalancer: enforce DiffDataCenterCount in balance (cross-DC phase + cross-rack DC cap)
Adds a cross-DC corrective phase that drains data centers holding more than
DiffDataCenterCount shards of a volume, and a per-DC cap on cross-rack move
targets. Both are no-ops when DiffDataCenterCount is unset, so balance output is
unchanged for non-DC placements.
* topology: ratio-aware EC shard slots and provisional empty-disk slot
GetEffectiveAvailableEcShardSlots now takes the target collection's data-shard
count, so a 4+2 volume's larger shards are not over-counted at 10 per volume slot;
and it keeps the one provisional slot for freshly started empty servers that
report max=0, matching getEffectiveAvailableCapacityUnsafe. FromActiveTopology
threads the ratio through.
* ecbalancer.Place: explicit disk-type filter signal (fix HDD vs any ambiguity)
HardDriveType normalizes to "", which collided with "" meaning any disk. Add
Constraints.FilterDiskType and normalize both sides so a hdd request matches disks
reported as "" and never leaks to SSD, while filter=false still means any.
* ecbalancer: add clearShardAccounting for repair snapshot reconciliation
Clears one disk's copy of a shard from per-domain accounting and recomputes the
node-level union (preserving a kept copy on another disk of the same node), without
crediting capacity. Repair uses it to drop to-be-deleted copies before placing
missing shards.
* ecbalancer: don't cap cross-DC target racks when DiffRackCount is unset
len(racks)+1 wrongly limited each target rack (3 in a 2-rack cluster), so draining
a DC could stop short of the DiffDataCenterCount cap. Use MaxShardCount+1 as the
effectively-unlimited default.
* topology/ecbalancer: ratio-correct EC capacity accounting
Reservation shard slots (default ShardsPerVolumeSlot units) are now converted to
the target ratio before subtracting, and existing EC shards are charged by size
(targetDataShards/shardDataShards) so a 2+1 shard isn't counted as one 10+4 slot.
Per-shard ratio lookup is behind shardDataShards (OSS uses the standard ratio).
* ecbalancer.Place: candidate tiering and eligible-rack caps
Adds a per-disk eligibility/preference abstraction so Place supports:
- preferred-tag whole-plan retry (try disks carrying the earliest tags first,
widen to all only if a tier cannot place every shard; reports
SpilledOutsidePreferredTags),
- soft disk-type spill via DiskTypePolicy (Any/Prefer/Require): Prefer fills the
preferred type then spills, reporting SpilledToOtherDiskType; Require filters,
- even per-rack caps that divide by racks holding an eligible disk, so a tiered
cluster (e.g. SSDs in 2 of 4 racks) isn't capped impossibly low.
Disk tags carried via Node.AddDiskTags + FromActiveTopology.
* ecbalancer: export ClearShardAccounting for repair snapshot reconciliation
* ecbalancer: address review feedback (ratio rounding, bitmap walk, same-DC moves)
- topology/ecbalancer: round shard-reservation and existing-shard footprint up
when converting to target-ratio shard slots, so a sub-slot reservation is not
truncated to zero and free capacity is not overstated for low-data-shard
layouts (targetDataShards < ds).
- erasure_coding: add ShardBits.All iterator and use it across the balancer,
cross-DC phase, and placement scoring instead of scanning 0..MaxShardCount and
probing Has on every id.
- ecbalancer: allow same-DC cross-rack moves when a DC already sits at its
DiffDataCenterCount cap; a same-DC move leaves the DC total unchanged. Add a
regression test that fails without the guard.
- ecbalancer cross-DC phase: pick targets via the eligible-aware
pickNodeInRackEligible/pickBestDiskEligible helpers so the disk-type filter is
honored and a 0 disk id is not mistaken for a valid selection.
* ecbalancer: test ecShardSlotsOnDisk fractional round-up
Cover the mixed-ratio path (targetDataShards < existing data shards) so a
shard's fractional footprint is never floored to zero and free capacity is not
overstated. Exercises the round-up via the targetDataShards parameter; OSS uses
the standard ratio at runtime while the enterprise build hits it with real
per-volume ratios.
* ecbalancer: assert node B rack in TestFromActiveTopology
* ecbalancer: split Destination into separate DataCenter and bare Rack
Replace the composite "dc:rack" Rack field on Destination with separate
DataCenter and bare Rack values, matching topology.DiskInfo and the worker-task
convention. Callers (and tests) read the data center directly instead of parsing
the composite with strings.SplitN.
* shell ec.balance: use utilization-based global balancing (parity with worker)
The shell's global rebalance phase balanced by raw shard count; switch it to
fractional fullness (shards/capacity), as the worker already does. On uniform
capacity the two agree; on heterogeneous capacity it fills nodes proportionally
instead of driving small-capacity nodes toward full.
Updates the heterogeneous-capacity regression test to assert even fullness
(~equal shards/capacity per node) rather than even shard count.
* ecbalancer: bounded-proportional per-DC shard spread
DiffDataCenterCount was enforced only as a ceiling (drain-to-cap), which could
leave a within-cap-but-lopsided DC distribution under a loose cap (e.g. 10/4 of 14
with cap=10). Now the cross-DC phase, the cross-rack DC guard, and Place all target
boundedMaxPerDC = min(DiffDataCenterCount, max(ceil(total/numDCs), parityShards)):
shards spread proportionally across DCs, but no tighter than the durability floor
(once each DC holds <= parityShards a DC loss is recoverable, so further spreading
only adds cross-DC/WAN traffic). No-op when DiffDataCenterCount is 0; identical to
before when the cap is the binding constraint.
* ecbalancer: drop DiffDataCenterCount enforcement for EC placement
The 1-byte volume ReplicaPlacement packs xyz into x*100+y*10+z<=255, so the DC
digit can only be 0-2 -- far too small to be a meaningful per-DC EC shard cap (a
cap of 1-2 would demand 7-14 DCs for a 10+4 volume). It's volume replica-placement,
not an EC spec. Removes the cross-DC balance phase, the DC guard in the cross-rack
phase, and the per-DC cap in Place (and the just-added bounded-proportional logic);
EC relies on the RP-independent rack/node even spread instead. Rack/node caps
(DiffRackCount/SameRackCount) are unchanged. Per-domain EC caps are left for a real
EC placement spec.
* ecbalancer: enforce per-disk durability cap; symmetric reserve/release
Place now refuses to put more than parityShards shards of a volume on a single
disk (pickBestDiskEligible skips a disk once it holds parityShards of the volume,
a hard cap not relaxed even in durability-first). Previously Place assigned by
free capacity, so a skewed near-full cluster could pile >parityShards onto one
disk -> losing it loses the volume; only distinct-disk count was checked. This
covers encode and repair (both route through Place); the caller skips/leaves the
volume rather than minting an unrecoverable layout.
Also makes reserveShard decrement freeSlots unconditionally, symmetric with
releaseShard's unconditional increment (the old guarded decrement could credit a
phantom slot on release if a shard were ever reserved onto a full disk).
* ecbalancer: add Topology.ReleaseVolumeShards (clear + credit) for greenfield encode
Releases all of a volume's shards from the snapshot and credits the freed disk
capacity, so a greenfield encode can plan as if stale EC shards from a prior failed
attempt are gone. Safe to credit because the encode task deletes stale shards
(cleanupStaleEcShards) before distributing the new ones. Distinct from
ClearShardAccounting (repair), which does not credit.
* ecbalancer: ReleaseVolumeShards credits node freeSlots, not just disks
releaseShard only increments per-disk freeSlots, but rack capacity is summed from
node freeSlots (buildRacks) and node freeSlots gates node eligibility. Crediting
only disks left a node/rack looking full after releasing stale shards, so a
greenfield encode still couldn't use the freed capacity. Now credits the node by
the total disk-slots freed.
* ecbalancer: correct PlacementMode docs (encode uses durability-first)
PlaceStrict was labeled '(encode)' but encode uses PlaceDurabilityFirst. Clarify
that durability-first is used by both encode and repair, reports relaxations in
PlaceResult.Relaxed, and never relaxes the per-disk durability cap.
* ecbalancer: treat SameRackCount as a direct per-node shard cap
The 3rd ReplicaPlacement digit now caps shards per node at exactly the digit
value, matching how DiffRackCount (2nd digit) caps per rack, instead of allowing
digit+1 per node. This makes the per-rack and per-node caps consistent and
matches the documented "digits cap EC shards per rack and per node" semantics;
e.g. 011 now means at most one shard per rack and one per node.
* EC encode: place shards via ecbalancer.Place + configurable replica placement
Encode now plans destinations through the shared ecbalancer.Place policy
(durability-first: prefers the source disk type and honors replica placement /
caps / anti-affinity, relaxing rather than failing when capacity is tight) instead
of the EC-only placement planner. Targets and capacity reservations use Place's
actual per-disk shard assignment, not a round-robin guess; cross-volume in-cycle
capacity is tracked by ActiveTopology's pending task, so the cached planner is no
longer consulted. Adds a configurable replica_placement (proto field 6 + worker
form + reader) that overrides the master default replication.
The placement-package planner code is left in place (now unused) and removed in a
follow-up that drops the package.
* EC encode: drop unused dataShards param from createECTargets
Addresses review feedback: after switching to Place's per-disk shardsPerPlan
assignment, createECTargets no longer needs the data-shard count.
* EC encode: fix packed-target validation, greenfield stale-shard accounting, RP docs
- Validate counts distinct shard ids across targets, not target rows, so packed
plans (fewer (node,disk) targets than shards) aren't rejected.
- planECDestinations releases the volume's stale EC shards from the snapshot before
Place (ReleaseVolumeShards), crediting their capacity. The encode task deletes
stale shards before distributing, so a retry on tight capacity no longer fails
planning by counting shards that are about to be removed.
- replica_placement config/form help no longer claims a data-center limit (the DC
digit is ignored for EC); detection logs a warning when a DC digit is set.
* EC encode: surface relaxed placement; mark replica_placement best-effort
Encode places with PlaceDurabilityFirst (the chosen lenient behavior), which can
relax caps/anti-affinity/replica-placement to avoid deferring. That was silent
(only disk-type/tag spills were logged). Now logs PlaceResult.Relaxed so a tight
replica placement isn't weakened unnoticed, and the config/form help states the
rack/node caps are best-effort during encode (enforced by rebalancing).
* EC encode: key per-disk shard grouping by struct, not formatted string
planECDestinations grouped destinations using a fmt.Sprintf("%s:%d") map key
per shard; use a {node,diskID} struct key and pre-size the map/slice to the
shard count to drop the per-shard string allocation.
* Add shared super_block.ResolveReplicaPlacement; use it in ec_balance
* Add ecbalancer.FromActiveTopology snapshot constructor for EC encode/repair
* Add ecbalancer.Place greenfield/repair placement core (strict + durability-first)
* topology: add GetEffectiveAvailableEcShardSlots; FromActiveTopology uses shard-granular free slots
GetDisksWithEffectiveCapacity flattens reserved shard slots into volume slots via
integer truncation, so an in-flight EC task reserving a non-multiple-of-
DataShardsCount number of shards was lost from the snapshot and freeSlots was
over-reported. GetEffectiveAvailableEcShardSlots subtracts the full reservation
impact at shard granularity.
* ecbalancer.Place: reject nodes without a free disk of the requested type
FromActiveTopology keeps all disk types in the snapshot, so an SSD-only request
could be routed to a node with only HDD capacity (pickBestDiskOnNode then returns
disk 0 on the wrong tier). Filter rack/node selection to those with a free disk
of the requested type.
* ecbalancer.Place: enforce ReplicaPlacement DiffDataCenterCount (per-DC shard cap)
* ecbalancer: enforce DiffDataCenterCount in balance (cross-DC phase + cross-rack DC cap)
Adds a cross-DC corrective phase that drains data centers holding more than
DiffDataCenterCount shards of a volume, and a per-DC cap on cross-rack move
targets. Both are no-ops when DiffDataCenterCount is unset, so balance output is
unchanged for non-DC placements.
* topology: ratio-aware EC shard slots and provisional empty-disk slot
GetEffectiveAvailableEcShardSlots now takes the target collection's data-shard
count, so a 4+2 volume's larger shards are not over-counted at 10 per volume slot;
and it keeps the one provisional slot for freshly started empty servers that
report max=0, matching getEffectiveAvailableCapacityUnsafe. FromActiveTopology
threads the ratio through.
* ecbalancer.Place: explicit disk-type filter signal (fix HDD vs any ambiguity)
HardDriveType normalizes to "", which collided with "" meaning any disk. Add
Constraints.FilterDiskType and normalize both sides so a hdd request matches disks
reported as "" and never leaks to SSD, while filter=false still means any.
* ecbalancer: add clearShardAccounting for repair snapshot reconciliation
Clears one disk's copy of a shard from per-domain accounting and recomputes the
node-level union (preserving a kept copy on another disk of the same node), without
crediting capacity. Repair uses it to drop to-be-deleted copies before placing
missing shards.
* ecbalancer: don't cap cross-DC target racks when DiffRackCount is unset
len(racks)+1 wrongly limited each target rack (3 in a 2-rack cluster), so draining
a DC could stop short of the DiffDataCenterCount cap. Use MaxShardCount+1 as the
effectively-unlimited default.
* topology/ecbalancer: ratio-correct EC capacity accounting
Reservation shard slots (default ShardsPerVolumeSlot units) are now converted to
the target ratio before subtracting, and existing EC shards are charged by size
(targetDataShards/shardDataShards) so a 2+1 shard isn't counted as one 10+4 slot.
Per-shard ratio lookup is behind shardDataShards (OSS uses the standard ratio).
* ecbalancer.Place: candidate tiering and eligible-rack caps
Adds a per-disk eligibility/preference abstraction so Place supports:
- preferred-tag whole-plan retry (try disks carrying the earliest tags first,
widen to all only if a tier cannot place every shard; reports
SpilledOutsidePreferredTags),
- soft disk-type spill via DiskTypePolicy (Any/Prefer/Require): Prefer fills the
preferred type then spills, reporting SpilledToOtherDiskType; Require filters,
- even per-rack caps that divide by racks holding an eligible disk, so a tiered
cluster (e.g. SSDs in 2 of 4 racks) isn't capped impossibly low.
Disk tags carried via Node.AddDiskTags + FromActiveTopology.
* ecbalancer: export ClearShardAccounting for repair snapshot reconciliation
* ecbalancer: address review feedback (ratio rounding, bitmap walk, same-DC moves)
- topology/ecbalancer: round shard-reservation and existing-shard footprint up
when converting to target-ratio shard slots, so a sub-slot reservation is not
truncated to zero and free capacity is not overstated for low-data-shard
layouts (targetDataShards < ds).
- erasure_coding: add ShardBits.All iterator and use it across the balancer,
cross-DC phase, and placement scoring instead of scanning 0..MaxShardCount and
probing Has on every id.
- ecbalancer: allow same-DC cross-rack moves when a DC already sits at its
DiffDataCenterCount cap; a same-DC move leaves the DC total unchanged. Add a
regression test that fails without the guard.
- ecbalancer cross-DC phase: pick targets via the eligible-aware
pickNodeInRackEligible/pickBestDiskEligible helpers so the disk-type filter is
honored and a 0 disk id is not mistaken for a valid selection.
* ecbalancer: test ecShardSlotsOnDisk fractional round-up
Cover the mixed-ratio path (targetDataShards < existing data shards) so a
shard's fractional footprint is never floored to zero and free capacity is not
overstated. Exercises the round-up via the targetDataShards parameter; OSS uses
the standard ratio at runtime while the enterprise build hits it with real
per-volume ratios.
* ecbalancer: assert node B rack in TestFromActiveTopology
* ecbalancer: split Destination into separate DataCenter and bare Rack
Replace the composite "dc:rack" Rack field on Destination with separate
DataCenter and bare Rack values, matching topology.DiskInfo and the worker-task
convention. Callers (and tests) read the data center directly instead of parsing
the composite with strings.SplitN.
* shell ec.balance: use utilization-based global balancing (parity with worker)
The shell's global rebalance phase balanced by raw shard count; switch it to
fractional fullness (shards/capacity), as the worker already does. On uniform
capacity the two agree; on heterogeneous capacity it fills nodes proportionally
instead of driving small-capacity nodes toward full.
Updates the heterogeneous-capacity regression test to assert even fullness
(~equal shards/capacity per node) rather than even shard count.
* ecbalancer: bounded-proportional per-DC shard spread
DiffDataCenterCount was enforced only as a ceiling (drain-to-cap), which could
leave a within-cap-but-lopsided DC distribution under a loose cap (e.g. 10/4 of 14
with cap=10). Now the cross-DC phase, the cross-rack DC guard, and Place all target
boundedMaxPerDC = min(DiffDataCenterCount, max(ceil(total/numDCs), parityShards)):
shards spread proportionally across DCs, but no tighter than the durability floor
(once each DC holds <= parityShards a DC loss is recoverable, so further spreading
only adds cross-DC/WAN traffic). No-op when DiffDataCenterCount is 0; identical to
before when the cap is the binding constraint.
* ecbalancer: drop DiffDataCenterCount enforcement for EC placement
The 1-byte volume ReplicaPlacement packs xyz into x*100+y*10+z<=255, so the DC
digit can only be 0-2 -- far too small to be a meaningful per-DC EC shard cap (a
cap of 1-2 would demand 7-14 DCs for a 10+4 volume). It's volume replica-placement,
not an EC spec. Removes the cross-DC balance phase, the DC guard in the cross-rack
phase, and the per-DC cap in Place (and the just-added bounded-proportional logic);
EC relies on the RP-independent rack/node even spread instead. Rack/node caps
(DiffRackCount/SameRackCount) are unchanged. Per-domain EC caps are left for a real
EC placement spec.
* ecbalancer: enforce per-disk durability cap; symmetric reserve/release
Place now refuses to put more than parityShards shards of a volume on a single
disk (pickBestDiskEligible skips a disk once it holds parityShards of the volume,
a hard cap not relaxed even in durability-first). Previously Place assigned by
free capacity, so a skewed near-full cluster could pile >parityShards onto one
disk -> losing it loses the volume; only distinct-disk count was checked. This
covers encode and repair (both route through Place); the caller skips/leaves the
volume rather than minting an unrecoverable layout.
Also makes reserveShard decrement freeSlots unconditionally, symmetric with
releaseShard's unconditional increment (the old guarded decrement could credit a
phantom slot on release if a shard were ever reserved onto a full disk).
* ecbalancer: add Topology.ReleaseVolumeShards (clear + credit) for greenfield encode
Releases all of a volume's shards from the snapshot and credits the freed disk
capacity, so a greenfield encode can plan as if stale EC shards from a prior failed
attempt are gone. Safe to credit because the encode task deletes stale shards
(cleanupStaleEcShards) before distributing the new ones. Distinct from
ClearShardAccounting (repair), which does not credit.
* ecbalancer: ReleaseVolumeShards credits node freeSlots, not just disks
releaseShard only increments per-disk freeSlots, but rack capacity is summed from
node freeSlots (buildRacks) and node freeSlots gates node eligibility. Crediting
only disks left a node/rack looking full after releasing stale shards, so a
greenfield encode still couldn't use the freed capacity. Now credits the node by
the total disk-slots freed.
* ecbalancer: correct PlacementMode docs (encode uses durability-first)
PlaceStrict was labeled '(encode)' but encode uses PlaceDurabilityFirst. Clarify
that durability-first is used by both encode and repair, reports relaxations in
PlaceResult.Relaxed, and never relaxes the per-disk durability cap.
* ecbalancer: treat SameRackCount as a direct per-node shard cap
The 3rd ReplicaPlacement digit now caps shards per node at exactly the digit
value, matching how DiffRackCount (2nd digit) caps per rack, instead of allowing
digit+1 per node. This makes the per-rack and per-node caps consistent and
matches the documented "digits cap EC shards per rack and per node" semantics;
e.g. 011 now means at most one shard per rack and one per node.
* fix(s3api/list): cancel ListEntries stream in hasChildren
* fix(s3api): use filer_pb.List in hasChildren
filer_pb.List already wraps the ListEntries stream in a cancellable
context, so the single-entry probe needs no separate helper or manual
context plumbing to avoid the leaked gRPC stream goroutine.
* fix(s3api): propagate request context into hasChildren
Thread r.Context() through listFilerEntries and hasChildren so the
implicit-directory probe cancels when the client disconnects, instead
of running on context.Background().
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
feat(helm): add volume.rust to run the Rust volume server
When set, the volume statefulset execs /usr/bin/weed-volume instead of
'weed volume', dropping the Go-only -logtostderr/-logdir/-v flags and the
'volume' subcommand. All shared flags and extraArgs carry over unchanged.
GitHub Actions artifacts drop the executable bit, so the pre-built Rust
volume server lands in the image as 0644 and 'weed-volume' fails to start
with 'exec: Permission denied'. chmod it 0755 after copying.
* fix(s3): list empty directories as directory markers
A real but empty directory created out of band (mount, mkdir, filer API)
carries no MIME, so it was hidden from S3 listings. hadoop-aws getFileStatus
probes LIST prefix=dir/ &delimiter=/ and reads an empty result as a missing
path, which breaks Spark's eventLog.dir when it points at an empty directory.
Surface such directories as directory markers, matching directories created
via PutObject with a trailing "/". Emptiness comes from the recursion result,
and the marker MIME is set only on the in-memory listing entry, so empty
directories stay eligible for empty-folder cleanup.
* fix(s3): only surface empty directory markers for explicit dir probes
Restrict the empty-directory marker to a trailing-slash prefix probe
(prefix=dir/), the pattern hadoop-aws getFileStatus uses. Plain listings
are left as before, so an empty directory left behind by deleted objects
(e.g. after lifecycle expiration) is no longer shown as a phantom key.
The maintenance scanner tries to plan EC destinations for every
eligible volume, so clusters that can't place EC logged a warning per
volume every cycle. The min-node gate already skips clusters with fewer
nodes than parity shards; demote the rest to V(2).
cluster.check asks every master to ping every volume server, but the
Ping gate validated volume-server targets only against the local
topology. Only the leader receives volume-server heartbeats, so a
follower's topology is empty and every probe through it failed with
"unknown ping target ... of type volumeServer".
Fall back to the volume-server set the master learns over its own
MasterClient subscription to the leader, the same source the filer gate
already trusts. The anti-SSRF intent is preserved: Ping still only dials
recognized cluster members.
fix(storage): harden zero-size idx scrub and mirror to rust
When a zero-size .idx is found, openIndex stats the backing .dat through
v.DataBackend: wrap that GetStat failure with %w, fix the indices typo, and
guard both openIndex and scrubVolumeData against a nil DataBackend (closed or
remote-only volumes) instead of panicking.
Add rust scrub tests for empty (superblock-only .dat, zero-size .idx) and
healthy volumes, keeping the volume server in parity with the go zero-size
scrub handling.
test(volume): wait for master to register both replicas before replicated upload
TestReplicatedUploadSucceedsImmediatelyAfterAllocate allocated the volume on
both nodes via direct AllocateVolume gRPC calls, then uploaded immediately. The
master only learns about replica locations through volume-server heartbeats,
which lag behind those direct gRPC calls, so the replicated write could look up
the master before the second replica was registered and fail with a 500
("replicating operations [1] is less than volume replication copy count [2]").
In production a client obtains its fid from the master assign flow, which
guarantees the master already knows every replica. The test crafts the fid by
hand, bypassing that guarantee, so wait until the master reports both replicas
before uploading.
The disk-spread assertion raced volume growth and heartbeats. volume.grow
-count is a writable-target topup, not add-N, and swallows partial-failure
errors, so one grow could leave a node's data on a single disk; ec.encode
then piles all that node's shards there and ec.balance can't spread them.
Retry grow on under-spread nodes until the master topology shows every node
holding volumes on at least two physical disks, then encode.
* fix(s3): keep server-side copy data in the bucket collection
UploadPartCopy and SSE-C CopyObject assigned destination volumes against
r.URL.Path, the S3 request URI. The filer derives a bucket's collection
only when the assign path sits under its buckets folder, so an S3 URI
routed copied bytes to the default collection instead of the destination
bucket's. Assign against the destination's real filer path.
* refactor(s3): centralize copy-part path and thread dstPath into SSE-C copy
Extract copyPartLocation so the fast path and writeEmptyCopyPart share one
definition of the .uploads/<id>/<n>_copy.part location. Pass the destination
filer path into copyChunksWithSSEC instead of re-deriving it from the request,
and thread it through key rotation so re-encrypt copies also assign in the
destination bucket's collection.
ChunkTransferStatus embeds a sync.RWMutex, so returning a slice of it
made callers copy the lock when ranging. Split out a copyable
ChunkTransferSnapshot holding the data fields and return that instead.
NameList, NameBatch and their serde were an earlier in-memory directory
batch implementation. The redis3 filer store uses its own ItemList
backed by Redis sorted sets, so these types had no production callers
(NameList only via its own test, LoadNameList none at all). Drop them
and the now-orphaned NameBatchData proto message, regenerating
skiplist.pb.go with the repo-standard protoc-gen-go v1.36.6.
* refactor(volume): extract replica sync/select into shared volume_replica package
Move the volume replica reconciliation helpers (status, union builder,
SyncAndSelectBestReplica, ReadNeedleMeta) out of the shell into a new
weed/storage/volume_replica package so both the shell (ec.encode, volume.tier.move,
volume.check.disk) and the EC encode worker can reuse them. No behavior change.
* fix(ec): bring ec.encode worker to parity with the shell
- Sync replicas and encode the most-complete one (via the shared
volume_replica.SyncAndSelectBestReplica) instead of a possibly-stale replica,
marking all replicas readonly first. Prevents silent data loss when a stale
replica is encoded and the originals deleted.
- Skip remote/tiered volumes in detection (shell ec.encode excludes them).
- Min-node safety gate: refuse to encode when cluster nodes < parity shards.
- Align default thresholds with the shell (fullness 0.95, quiet 1h).
* fix(vacuum): plugin path honors min_volume_age_seconds override
deriveVacuumConfig hard-coded MinVolumeAgeSeconds=0, dropping any configured
value. Read it from worker config (default 0, matching the shell/master vacuum
which has no age gate) so an explicit override is honored.
* address review feedback
- config.go: align GetConfigSpec schema defaults (quiet_for_seconds=3600,
fullness_ratio=0.95) with the runtime defaults so UI/bootstrap flows match the
shell (coderabbitai).
- ec_task.go: roll back readonly when markReplicasReadonly fails partway, so
already-marked replicas don't stay readonly (coderabbitai).
- volume_replica: pass the caller's replica statuses into buildUnionReplica instead
of re-fetching them, and skip the per-needle ReadNeedleMeta RPC when the source
replica is read-only (gemini-code-assist).
* test(plugin_workers/ec): make fixtures eligible under the new defaults
The default EC encode thresholds were raised to match the shell (fullness 0.95,
quiet 1h), but the plugin-worker integration fixtures still used 90%-full /
10-minute-old volumes, so detection found no eligible volumes and the tests failed
in CI. Bump the eligible fixtures to 96% full and 2h old.
* fix(redis3): prevent filer crash from inconsistent skiplist ends
DeleteByKey updated the two ends asymmetrically: the start side decided
whether to clear StartLevels[index] by comparing a cached reference key,
while the end side cleared EndLevels[index] structurally. The redis3
ItemList re-keys a node while keeping its id, so that cached key drifts.
When such a node was the only one at a level and got deleted, the stale
key comparison left StartLevels dangling while EndLevels was cleared to
nil. The next InsertByKey then dereferenced a nil EndLevels[0] and took
down the whole filer during a rename or delete.
Match the deleted node by its unique id so both ends stay consistent,
and guard each end in InsertByKey so an already-corrupted skiplist
persisted in Redis self-heals instead of crashing on load.
* fix(redis3): propagate errors from WriteName node split
The case 2.3 split path returned nil instead of the error in seven
branches. Because the split runs a multi-step sequence (DeleteByKey on
the skiplist, ItemAdd, redis range-delete, ItemAdd), a swallowed failure
let WriteName report success while the skiplist was half-updated, which
the caller then persisted - silently corrupting the directory listing
and setting up the very inconsistent-ends state that crashes the filer.
The plugin cluster context forwarded filers as gRPC-only addresses
(host:grpcPort). The admin-script worker stored that in
ShellOptions.FilerAddress, whose shell commands re-derive the gRPC port
via ToGrpcAddress() and re-add the +10000 offset, dialing a non-existent
host:28888.
Carry filers in pb.ServerAddress form (host:httpPort.grpcPort) and let
each consumer convert when it dials: the admin shell uses it verbatim,
while the s3_lifecycle and iceberg workers collapse it to a gRPC address.
Rename the proto field filer_grpc_addresses -> filer_addresses so the
name matches the content.
weed fix -ecx reconstructs the .dat from the local data shards, scans the
needles, and writes a fresh ascending-sorted .ecx containing only live
entries — the same on-disk index WriteSortedFileFromIdx emits at encode
time. When the .vif is also missing it is regenerated from the inferred
EC ratio (flags > .vif > shard-count inference / 10+4) and the .dat size
recovered from the scan.
When some data shards are missing but at least dataShards shards survive,
the missing shards are first reconstructed from the survivors via
Reed-Solomon, so a partial shard set is repaired too.
Also makes erasure_coding.WriteDatFile de-stripe using len(shardFileNames)
instead of the DataShardsCount constant, so the caller's actual data-shard
count is honored (behavior-preserving for the default 10, and fixing the
existing caller that already passes ECContext.DataShards).
This recovers an EC volume whose sealed index was lost from every node
while enough shards survive, a state neither ec.rebuild nor ec.decode can
repair because both require an existing .ecx.
Flags: -ecx, -ecDataShards, -ecParityShards. Run with the volume server
stopped.
* fix(s3): sync IAM policies to advanced IAM Manager policy engine
* test(s3): add unit tests for PutPolicy/DeletePolicy IAM Manager sync
* fix(s3): flush loaded policies in SetIAMIntegration, drop extra reload
Sync the policies already loaded from the credential store into the IAM
Manager's engine from SetIAMIntegration itself, instead of re-running a
full LoadS3ApiConfigurationFromCredentialManager after setup. This covers
both startup orderings without a second filer round-trip or racing the
async loader goroutine: if the load won, the policies are in memory to
push; if SetIAMIntegration won, the load's own sync runs afterward.
Move the runtime PutPolicy/DeletePolicy sync out of the iam.m write lock
so the per-request auth RLock path isn't blocked by the policy recompile.
* fix(s3): serialize IAM manager policy resync to avoid stale snapshots
SyncRuntimePolicies replaces the manager's full policy set, so applying a
policy view captured before a later mutation can resurrect a deleted
policy or drop a new one. Funnel every path (PutPolicy, DeletePolicy,
SetIAMIntegration, and the credential-manager load) through a single
resyncIAMManagerPolicies that serializes on a dedicated mutex and reads
iam.policies fresh at apply time, so the live map always wins regardless
of interleaving. The load now installs the config into iam.policies
before resyncing, closing the window where the manager held policies the
map didn't yet have.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
test(ec): pre-populate disks so multi-disk EC balance spread is deterministic
The multidisk shard-loss regression asserts EC shards spread across more
than one disk per node, but that only holds for disks the balancer can see.
The master enumerates a physical disk only when it already holds a volume
or EC shard — an empty disk leaves no trace, since heartbeats aggregate
capacity per disk type, not per physical disk. So whether the post-encode
balance spread shards depended on how the master happened to place the
filler volumes across disks, which varies by environment: the test passed
locally (shards on 5 disks) but produced one disk per node in CI and failed
the "got 3 disks across 3 nodes" assertion.
Grow a few volumes on each server before encoding so every physical disk
holds a volume and is visible to the balancer. The volume server places
each new volume on its least-loaded disk, so a handful of grows touches
every disk, making the spread deterministic. The assertion still has teeth:
it counts disks holding shard files, so a balancer that failed to spread
would still collapse to one disk per node.
* fix(shell): count physical disks in cluster.status on multi-disk nodes
The master keys DataNodeInfo.DiskInfos by disk type, so several same-type
physical disks on one node collapse into a single DiskInfo entry. cluster.status
(printClusterInfo) and CountTopologyResources counted len(DiskInfos), reporting
one disk per node instead of the real physical disk count, while volume.list and
the admin ActiveTopology already split per physical disk.
Route both counters through DiskInfo.SplitByPhysicalDisk so a node with N
same-type disks reports N. Cosmetic/diagnostic only; placement already uses the
per-disk activeDisk map.
* fix(ec): attribute EC balance source disk per shard and reject same-node moves
On multi-disk nodes the EC balance worker built a node-level view that kept only
the first physical disk id per (node, volume), so a move of a shard living on a
different disk reported the wrong source disk. That source disk drives the
per-disk capacity reservation, so the wrong disk drifts the capacity model the
EC placement planner relies on. Track shards per physical disk and resolve the
actual source disk for every emitted move (dedup, cross-rack, within-rack,
global), keeping the per-disk view consistent as simulated moves are applied.
Also close a data-loss trap: VolumeEcShardsDelete is node-wide (it removes the
shard from every disk on the node) and copyAndMountShard skips the copy when
source and target addresses match, so a same-node move would erase a shard it
never copied. isDedupPhase now requires the same node AND disk, and Validate /
Execute reject same-node cross-disk moves outright.
* fix(ec): spread EC balance moves across destination disks
Port the shell ec.balance pickBestDiskOnNode heuristic to the EC balance
worker so a moved shard is placed on a good physical disk instead of always
deferring to the volume server (target disk 0). The detection now builds a
per-physical-disk view of each node (free slots split from the node total, exact
EC shard count, disk type, discovered from both regular volumes and EC shards)
and, for each cross-rack, within-rack, and global move, chooses the destination
disk by ascending score:
- fewer total EC shards on the disk,
- far fewer shards of the same volume on the disk (spread a volume's shards
across disks for fault tolerance), and
- data/parity anti-affinity (a data shard avoids disks holding the volume's
parity shards and vice versa).
Planned placements are reserved on the in-memory model during a run so multiple
shards moved to the same node spread across its disks rather than piling on one.
* fix(ec): bring EC balance worker to parity with shell ec.balance
The worker's cross-rack and within-rack balancing balanced shards by total
count; the shell balances data and parity shards separately with anti-affinity
and honors replica placement. Port that logic so the automatic balancer makes
the same fault-tolerance-aware decisions as the manual command:
- Cross-rack and within-rack now run a two-pass balance: data shards spread
first, then parity shards spread while avoiding racks/nodes that already hold
the volume's data shards (anti-affinity), mirroring doBalanceEcShardsAcrossRacks
and doBalanceEcShardsWithinOneRack.
- Optional replica placement: a new replica_placement config (e.g. "020")
constrains shards per rack (DiffRackCount) and per node (SameRackCount); empty
keeps the previous even-spread behavior.
- The data/parity boundary is resolved from a per-collection EC ratio (standard
10+4 here), replacing the previously hardcoded constant at the call sites.
Selection is deterministic (sorted keys) to keep behavior reproducible.
* refactor(ec): extract shared ecbalancer package for shell and worker
The EC shard balancing policy was duplicated between the shell ec.balance
command and the admin EC balance worker, and the two had drifted (multi-disk
handling, data/parity anti-affinity, replica placement). Extract the policy into
a new pure package, weed/storage/erasure_coding/ecbalancer, that both callers
share so it cannot drift again.
- ecbalancer.Plan(topology, options) runs the full policy (dedup, cross-rack and
within-rack data/parity two-pass with anti-affinity, global per-rack balance,
and diversity-aware disk selection) over a caller-built Topology snapshot and
returns the shard Moves. It depends only on erasure_coding and super_block.
- The worker builds the Topology from the master topology and turns Moves into
task proposals; the shell builds it from its EcNode model and executes Moves
via the existing move/delete RPCs. Per-collection EC ratio resolution stays in
each caller (passed as Options.Ratio).
- Options expose the two genuine policy differences: GlobalUtilizationBased
(worker balances by fractional fullness; shell by raw count) and
GlobalMaxMovesPerRack (worker moves incrementally across cycles; shell drains
in one pass).
The shell keeps pickBestDiskOnNode for the evacuate command. Policy tests move to
the ecbalancer package; the shell and worker keep their adapter/execution tests.
* fix(ec): restore parallelism and per-type/full-range balancing after ecbalancer refactor
Address regressions and gaps from the ecbalancer extraction:
- Shell ec.balance honors -maxParallelization again: planned moves run phase by
phase (preserving cross-phase dependencies) with bounded concurrency within a
phase. Apply mode does only the RPCs concurrently; dry-run stays sequential and
updates the in-memory model for inspection.
- Rack and node balancing gate on per-type spread (data and parity separately)
instead of combined totals, so a data/parity skew is corrected even when the
per-rack/node totals are even.
- Global rack balancing iterates the full shard-id space (MaxShardCount) so
custom EC ratios with more than the standard total are candidates.
- Cross-rack planning decrements the destination node's free slots per planned
move, so limited-capacity targets are no longer over-planned.
* fix(ec): make EC dedup keeper deterministic and capacity-aware
When a shard is duplicated across nodes, keep the copy on the node with the most
free slots and delete the duplicates from the more-constrained nodes, relieving
capacity pressure where it is tightest. Tie-break on node id so the choice is
deterministic. This unifies the shell and worker (the shell previously kept the
least-free node, an incidental default) on the more sensible behavior.
* fix(ec): restore global volume-diversity and per-volume move serialization
Two more behaviors lost in the ecbalancer refactor:
- Global rack balancing again prefers moving a shard of a volume the destination
does not hold at all before adding another shard of an already-present volume
(two-pass, mirroring the old balanceEcRack), keeping each volume's shards
spread across nodes.
- Shell apply-mode execution serializes a single volume's moves within a phase
while still running different volumes in parallel, so concurrent moves of the
same volume cannot race on its shared .ecx/.ecj/.vif sidecar files.
* fix(ec): key EC balance shards by (collection, volume id)
A numeric volume id can be reused across collections, and EC identity is
(collection, vid) (see store_ec_attach_reservation.go). The ecbalancer keyed
Node.shards by vid alone, so volumes sharing an id across collections merged into
one entry — letting dedup delete a "duplicate" that is actually a different
collection's shard, and letting moves act across collections. Key shards by
(collection, vid) throughout so each volume stays distinct.
* fix(ec): credit freed capacity from dedup before later balance phases
Dedup deletions are simulated only by applyMovesToTopology, which cleared shard
bits but did not return the freed disk/node/rack slots. Later phases reject
destinations with no free slots, so a slot opened by dedup could not be reused in
the same Plan/ec.balance run. applyMovesToTopology now credits the freed
disk/node/rack capacity for dedup moves (non-dedup moves still rely on the inline
accounting their phase already did).
* test(ec): add multi-disk EC balance integration test
Cover issue 9593 end-to-end at the unit level the old tests missed: build the
master's actual multi-disk wire format (same-type disks collapsed into one
DiskInfo, real DiskId only in per-shard records), run it through a real
ActiveTopology and the Detection entry point, then replay the planned moves with
the volume server's true semantics (node-wide VolumeEcShardsDelete) and assert no
EC shard is ever lost. Covers a balanced spread, a one-node-concentrated volume,
and a multi-rack spread, and asserts moves are safe (no same-node cross-disk),
correctly attributed to the source disk, and redistribute concentrated volumes
across both other racks and multiple destination disks.
* fix(ec): aggregate per-disk EC shards when verifying multi-disk volumes
collectEcNodeShardsInfo overwrote its per-server entry for each EcShardInfo of a
volume. A multi-disk node reports one EcShardInfo per physical disk holding shards
of the volume, so only the last disk's shards survived — the node looked like it
was missing shards it actually had. This made ec.encode's pre-delete verification
(and ec.decode) under-count volumes whose shards are spread across disks on one
server, falsely aborting the encode on multi-disk clusters. Union the per-disk
shard sets per server instead.
Also make verifyEcShardsBeforeDelete poll briefly: shard relocations reach the
master via volume-server heartbeats, so a freshly distributed shard set may not be
fully visible the instant the balance returns. Retry before concluding the set is
incomplete; genuine loss still fails after the retries are exhausted.
* test(ec): end-to-end multi-disk EC balance shard-loss regression
Start a real cluster of multi-disk volume servers (3 servers x 4 disks),
EC-encode a volume, run ec.balance, and assert hard invariants the prior
integration tests only logged: after encode all 14 shards exist, ec.balance loses
no shard, shards span more than one disk per node, and cluster.status counts
physical disks (not one per node). This reproduces issue 9593 end to end and would
have caught the multi-disk shard-aggregation bug fixed alongside it.
* fix(ec): bring EC balance worker/plugin path to parity with shell
- Per-volume serialization and phase order: key the plugin proposal dedupe by
(collection, volume) instead of (volume, shard, source), so the scheduler runs
only one of a volume's moves at a time (within a run and against in-flight jobs).
Concurrent same-volume moves raced on the volume's .ecx/.ecj/.vif sidecars; and
because the planner emits a volume's moves in phase order, they now execute in
order across detection cycles, matching the shell.
- disk_type "hdd": normalize via ToDiskType (hdd -> "" HardDriveType) while keeping
a "filter requested" flag, so disk_type=hdd matches the empty-keyed HDD disks
instead of nothing; apply the canonical type to planner options and move params.
- Replica placement: expose shard_replica_placement in the admin config form and
read it into the worker config, mirroring ec.balance -shardReplicaPlacement.
* test(ec): rename worker in-process test (not a real integration test)
The worker-package multi-disk tests build a fake master topology and simulate
move execution; they are not real-cluster integration tests. Rename
integration_test.go -> multidisk_detection_test.go and drop the Integration
prefix so 'integration' refers only to the real-cluster E2Es in test/erasure_coding.
* ci(ec): remove redundant ec-integration workflow
ec-integration.yml duplicated EC Integration Tests under the same workflow name
but ran only 'go test ec_integration_test.go' (one file), so it never ran new
test files (e.g. multidisk_shardloss_test.go) and was a strict, path-filtered
subset of ec-integration-tests.yml, which already runs 'go test -v' over the whole
test/erasure_coding package on every push/PR.
* fix(ec): worker falls back to master default replication for EC balance
For strict parity with the shell, the EC balance worker now uses the master's
configured default replication as the replica-placement fallback when no explicit
shard_replica_placement is set, instead of always defaulting to even spread.
The maintenance scanner reads it via GetMasterConfiguration each cycle and passes
it through ClusterInfo.DefaultReplicaPlacement; detection resolves the constraint
(explicit config wins, else master default, else none) in resolveReplicaPlacement.
A zero-replication default (the common 000 case) still means even spread, so the
common configuration is unchanged.
* fix(ec): plugin path populates master default replication too
The plugin worker built ClusterInfo with only ActiveTopology, so the master
default replication fallback added for the maintenance path never reached
plugin-driven EC balance detection — empty shard_replica_placement still meant
even spread there. Fetch the master default via GetMasterConfiguration (new
pluginworker.FetchDefaultReplicaPlacement) and set ClusterInfo.DefaultReplicaPlacement
so both detection paths resolve replica placement identically to the shell.
* docs(ec): empty shard replica placement uses master default, not even spread
The EC balance config text (admin plugin form, legacy form help text, and
the struct/proto field comments) still said an empty shard_replica_placement
spreads evenly. The runtime resolves empty to the master default replication
(resolveReplicaPlacement), matching shell ec.balance, with even spread only
when that default is empty or zero. Update the text to match and regenerate
worker_pb for the proto comment change.
test(mount): fix fd leak that deadlocked the DLM handoff check
The cross-mount handoff checks held a file open on mount 2 via fd 9 to
keep the distributed lock, then started the SMB writer in a background
subshell. The subshell inherited fd 9, so the SMB writer kept the file
open and waited on a lock held by its own descriptor; the put could
never complete, and the two checks were parked as expected-fail.
Close fd 9 in the subshell (9>&-) so the writer does not hold the file.
The waiter now acquires the freed lock within ~1s, so the two checks are
real assertions and the xfail machinery is gone.
* test(mount): add Samba over FUSE integration test
Export a SeaweedFS FUSE mount over SMB with smbd and drive it with
smbclient: file round-trips, directories, rename, large-file chunking,
recursive upload, cross-protocol consistency, and deletes.
A second -dlm mount adds locking coverage: POSIX fcntl byte-range locks,
distributed-lock write coordination, and concurrent writers. The two
cross-mount handoff checks currently fail and pin a known limitation -
the distributed lock is released on FUSE Release, which the kernel can
delay under contention.
Runs locally via test/samba/run.sh or in Docker via the compose file;
wired into CI as samba-integration.yml.
* fix(cluster): release distributed lock without racing the renewal goroutine
Stop() closed the cancel channel, slept 10ms, then unlocked using
renewToken. A renewal in flight during that window rotates the token on
the server, so the unlock may be sent with a stale token, fail with a
mismatch, and leave the lock to linger until its TTL expires - stalling
other mounts waiting to write the same file.
Wait for the renewal goroutine to exit before unlocking. The channel
close also makes the renewToken read happen-after the last renewal.
* fix(cluster): poll for distributed lock acquisition without exponential backoff
A mount waiting to write a file held by another mount acquired through
util.RetryUntil, whose backoff grows to several seconds. Once the holder
released, the waiter could sleep that long before retrying, stretching
the cross-mount handoff past client timeouts.
Poll at the steady ~1s cadence AttemptToLock already enforces instead.
* test(mount): tighten Samba harness and mark the DLM handoff checks xfail
Run the workflow for weed/cluster changes, fail fast when the filer or
smbd port never opens, and fold the recursive mput result into its own
assertion so it cannot false-pass.
Mark the two cross-mount handoff checks expected-fail: they pin the
remaining DLM liveness bug (the lock is freed only on the delayed FUSE
Release) without failing CI, and turn the suite red if the handoff is
ever fixed.
* fix(cluster): keep a wedged renewal shutdown from sending a stale unlock
If the renewal goroutine is stuck in a slow RPC, Stop() fell through to
unlock anyway once it timed out waiting. A late renewal can rotate
renewToken, so that unlock races it, is rejected on a stale token, and
leaves the lock lingering until its TTL regardless. On the timeout path,
skip the unlock and let the TTL expire the lock instead.
* fix(cluster): wake the long-lived lock renewal loop promptly on Stop
StartLongLivedLock's renewal loop slept uninterruptibly between attempts,
up to 5*renewInterval (2.5*lockTTL) while unlocked. Stop() waits only
lockTTL+2s for the goroutine to exit, so a Stop() during that backoff
would time out before the goroutine woke and closed renewalDone,
breaking the shutdown synchronization. Sleep on a timer with a select on
cancelCh so the loop exits immediately.
* fix(filer): don't disable the SQL idle connection pool when unconfigured
The mysql/mysql2/postgres stores called SetMaxIdleConns(maxIdle)
unconditionally, so an unset connection_max_idle (0) actively kept zero
idle connections - every query opened and closed a fresh connection
instead of reusing the pool.
Only apply the value when it's set; otherwise leave database/sql's
default idle pool of 2 in place.
* comments: shorten idle-pool note
* fix(filer): default the SQL idle pool via config, keep explicit 0 honored
Apply the idle-pool default at the config layer with SetDefault instead of
guarding the SetMaxIdleConns call. An absent connection_max_idle now reads
back as 2 (pool stays on), while an explicit 0 flows through to
SetMaxIdleConns(0) so operators can still disable idle pooling on purpose.
The planner refused to create an EC task unless it found totalShards
distinct (server, disk_id) targets, so a cluster with fewer disks than
shards (e.g. 8 single-disk servers for a 10+4 scheme) could never encode.
A disk safely holds several distinct shards of one volume: each is its own
.ecNN file and ReceiveFile keys by that extension. Drop the strict check and
let createECTargets round-robin shards across the available disks, matching
ec.encode's "4,4,3,3" fallback. The minTotalDisks floor (ceil(total/parity))
already keeps any disk under parityShards shards, so the volume still
survives losing any one disk.
Reserve capacity for the actual per-disk shard count rather than assuming
one shard each, so packing doesn't over-commit disk slots.
* fix(filer.sync): keep sync_offset fresh while the source is read-only
sync_offset holds the timestamp of the last replicated source event, so
monitoring derives lag from now-sync_offset. A read-only source emits no
metadata events, so the gauge froze at the last write and the derived lag
grew without bound, making thresholds unusable.
The source filer now sends an idle heartbeat carrying its current time
while a subscriber is caught up to the buffer head. filer.sync uses it to
advance the gauge, so now-sync_offset reflects real lag. Heartbeats are
opt-in (client_supports_idle_heartbeat), are never written to the metadata
log, and do not move the resume checkpoint, so a restart still resumes
from the last real event.
* fix(filer.sync): gate idle heartbeat on the read cursor, not SinceNs
In metadata-chunks mode persisted entries replay as log file refs and
never reach eachLogEntryFn, so lastSeenTsNs stays put and a caught-up
subscriber with an old SinceNs would never get a heartbeat. Use the
read cursor (lastReadTime), which advances in that mode too, max'd with
lastSeenTsNs so the in-memory backlog-then-idle case still works while
the cursor returned to the caller has not yet updated.
adjustAfterMove now removes the moved volume from the source disk's
VolumeInfos in place: it swaps the entry with the last one and nils the
tail. evacuateNormalVolumes ranges directly over that same slice, so the
niled tail slot is later read as a nil *VolumeInformationMessage and the
move attempt panics on vol.DiskType.
Iterate over a snapshot of the slice so in-place removals during a move
cannot leave nil holes in the loop.
Authentication records the identity with r.WithContext, which returns a
request copy. Handlers that log their own audit entry (PUT, DELETE,
tagging) see it, but GET/HEAD object and IAM operations rely on track()'s
fallback entry, which is built from the original request the auth copy
never reached - so requester came out empty.
Install a mutable identity holder on the request before authentication
and have SetIdentityNameInContext record into it. The holder is shared by
pointer across every request copy, so the fallback entry recovers the
authenticated requester. The per-request context value still takes
precedence, so nothing changes for handlers that see the auth copy.
* fix(shell): volume.balance no longer drains all volumes onto one server
The density-based capacity function reads per-disk VolumeInfos sizes, but
adjustAfterMove only updated VolumeCount and the selectedVolumes map. The
planner re-read a stale topology after every move, so the source node's
density never dropped and it kept moving volumes until that node was empty.
Move the volume's size accounting between disks after each planned move so the
density recomputes and the loop converges to an even distribution.
* refactor(shell): O(1) volume removal and direct disk lookup in adjustAfterMove
removeVolumeInfo swaps with the last element instead of shifting, and the disk
is fetched by key rather than ranging the DiskInfos map.
* fix(mount): keep periodic metadata flush from dropping concurrent chunk uploads
The periodic flush snapshotted entry.Chunks, then ran CompactFileChunks and
MaybeManifestize (the manifest upload is a network round trip) before
reassigning entry.Chunks. Async uploaders append freshly uploaded chunks
during that window, and the reassignment overwrote them: the data stayed on
the volumes but the file lost those chunk references, leaving zero-filled
holes on read. Large sequential writes such as cat of two 15 GiB files hit
several flush cycles and ended up corrupted.
Snapshot the chunk list under the entry lock with a length marker, do the
slow compaction and manifestization on the snapshot, then splice the
processed prefix back in front of whatever chunks arrived after the
snapshot.
* mount: drop redundant slice copies in the flush splice
processedPrefix is freshly built and the tail sub-slice is consumed
immediately under the entry lock, so append straight onto processedPrefix
instead of allocating two throwaway copies.
* chore(weed/command): prune unused functions
* drop now-unused closed field and renderLocked guard
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* feat(s3): add TagUser, UntagUser, ListUserTags IAM actions
Adds AWS IAM-compatible user tag operations on the embedded IAM
endpoint. Tags persist in the Identity proto as a repeated UserTag
field; the existing 50-tag / 128-byte-key / 256-byte-value AWS limits
are enforced. Pagination is stubbed (IsTruncated=false) since the
50-tag cap means all tags fit in a single response.
* review: validate UntagUser TagKeys entries
parseTagKeysParams now rejects empty keys and keys past
MaxUserTagKeyLength; UntagUser additionally requires at least one
TagKeys.member.N entry to match AWS validation behavior.
* review: pre-allocate user-tag merge and filter slices
mergeUserTags now allocates the combined existing+incoming capacity
up front; UntagUser builds the filtered slice via make with the full
ident.Tags capacity instead of ident.Tags[:0:0], which forced a
reallocation on every append.
* review: cover duplicate-in-request and invalid TagKeys cases
Regression tests assert TagUser rejects two members with the same key
in one request, and UntagUser rejects missing/empty/oversized TagKeys
entries.
* feat(s3): add four bucket configuration handlers
- GetBucketPolicyStatus: computes IsPublic from the existing bucket policy
- PutBucketRequestPayment: companion writer to the existing GET; accepts
only BucketOwner
- GetBucketAccelerateConfiguration: returns <Status>Suspended</Status>
- GetBucketLogging: returns an empty BucketLoggingStatus
Lets AWS SDK probes succeed instead of returning MethodNotAllowed.
* review: route GetBucketPolicyStatus through checkBucket
Mirrors the existence/auth gating used by other bucket handlers and
drops the bespoke filer_pb lookup so NoSuchBucket precedence is
consistent across the API surface.
* review: cap PutBucketRequestPayment body with MaxBytesReader
The body is unmarshalled as RequestPaymentConfiguration, which is a
handful of bytes; reject excessively large payloads up front and
defer Close immediately after wrapping.
* review: gate static getters on checkBucket
GetBucketAccelerateConfiguration and GetBucketLogging now run the
standard bucket existence check before returning the static
Suspended / empty-status response so a missing bucket cannot appear
to have valid configuration.
* review: share cache helper across misc tests; check io.ReadAll error
Accelerate and Logging tests now run through newMiscTestServer like
the others so the checkBucket guard sees a cached bucket; the
ReadAll error is explicitly checked.
* feat(s3): stub bucket configuration list endpoints
Adds Get and List handlers for Analytics, Inventory, IntelligentTiering,
and Metrics bucket configurations. List returns an empty result with
IsTruncated=false; single-get returns NoSuchConfiguration so SDK error
parsing remains predictable.
* review: gate stubs on bucket existence
All eight stub handlers now call checkBucket via stubBucketGuard so
NoSuchBucket takes precedence over NoSuchConfiguration / empty-list
responses, matching AWS S3 precedence. Tests provide a cached bucket
so the guard sees it as present.
* test(s3api): cover IAM inline policy aws:SourceIp + group inline gap
Unit tests under weed/s3api/ drive PutUserPolicy / PutGroupPolicy → reload
→ VerifyActionPermission with a synthetic 127.0.0.1 request and assert that
the policy's IpAddress condition flips the outcome.
The user-policy cases pass on master (hydrateRuntimePolicies already routes
inline docs through the policy engine, so Condition blocks are honored end-
to-end). The group-policy case fails: PutGroupPolicy still returns
NotImplemented, so a group inline doc never lands in the engine.
Integration counterparts live under test/s3/iam/ and exercise the same
paths against a live SeaweedFS S3+IAM endpoint.
* s3api: support group inline policies + Condition enforcement
PutGroupPolicy/GetGroupPolicy/DeleteGroupPolicy/ListGroupPolicies used to
return NotImplemented in embedded IAM mode, so anything attached to a
group as an inline doc — including aws:SourceIp or any other Condition —
was simply unreachable.
Wire the four endpoints to the credential-store methods that were
already in place (memory, postgres, filer_etc all implement
GroupInlinePolicyStore). On every config reload, hydrateRuntimePolicies
now also walks LoadGroupInlinePolicies, registers each doc in the IAM
policy engine under __inline_group_policy__/<group>/<policy>, and
appends that key to Group.PolicyNames so evaluateIAMPolicies picks it up
through its existing group walk. PutGroupPolicy/DeleteGroupPolicy are
added to the ReloadConfiguration trigger list in DoActions.
Side fix: MemoryStore.LoadConfiguration now surfaces store.groups too.
Without it iam.groups never repopulated on a memory-store reload, so
group policy evaluation silently no-op'd whether the policy was inline
or attached. The existing tests didn't notice because no test reloaded
through cm after creating a group.
The NotImplemented unit test is inverted to drive the new round-trip.
* s3api: drop redundant refreshIAMConfiguration from Put/DeleteGroupPolicy
DoActions already triggers ReloadConfiguration for both actions via the
explicit reload list, so calling refreshIAMConfiguration inline runs the
load twice per request. Per PR review.
* s3api: scope group-policy resource names per test; tighten deny polling
- Integration test resource names get a per-test suffix so retried or
parallel CI jobs don't trip EntityAlreadyExists / BucketAlreadyExists.
- Deny-path Eventually loops gate on AccessDenied via a typed helper
rather than any non-nil error; transient setup errors no longer end
the wait prematurely.
- ListGroupPolicies returns ServiceFailure when the credential manager
is nil, matching Put/Get/DeleteGroupPolicy.
* test(s3 iam): cover both IPv4 and IPv6 loopback in allow CIDRs
CI runners with happy-eyeballs resolve `localhost` to ::1 first, in
which case a 127.0.0.0/8-only allow would silently never match and the
deny-driven enforcement test would hang for the allow case. Add ::1/128
to every loopback-matching policy so the allow path works regardless of
which loopback family the SDK lands on.
* fix(ec): VolumeEcShardsInfo walks every disk on multi-disk servers
When a volume server holds EC shards for the same vid across more than
one disk, each DiskLocation registers its own EcVolume entry and
Store.FindEcVolume returns whichever one it hits first. The shard-info
RPC iterated only that single EcVolume's Shards, so the response missed
every shard mounted on a sibling disk.
The worker's verifyEcShardsBeforeDelete sums the per-server responses
into a union bitmap and refuses to delete the source volume when the
union falls short of dataShards+parityShards. On multi-disk
destinations, the union was systematically under-counted and source
deletion got blocked even though all shards were physically present and
mounted.
Walk every DiskLocation in the handler and emit the deduplicated union
of all shards. The .ecx-backed fields (file counts, volume size) still
come from a single EcVolume since every disk's entry opens the same
.ecx via NewEcVolume's cross-disk fallback.
Tests:
- TestVolumeEcShardsInfo_AggregatesAcrossDisks unit test in
weed/server/.
- test/volume_server/grpc/ec_verify_multi_disk_test.go integration test
drives the full generate -> mount -> redistribute -> restart ->
reconcile path and asserts both VolumeEcShardsInfo and
VerifyShardsAcrossServers + RequireFullShardSet (the production
source-deletion gate) report all 14 shards.
- ec_multi_disk_lifecycle_test.go tightened: replaces the
"VolumeEcShardsInfo only sees one disk's EcVolume" workaround with a
full-shard-set assertion.
* review: use ShardBits bitmask + cap-pre-allocation for shard dedup
* fix(s3): stop S3 Tables routes from swallowing buckets named "buckets" or "get-table"
The S3 Tables REST endpoints share top-level paths with the regular S3
API (/buckets for ListTableBuckets/CreateTableBucket, /get-table for
GetTable). They are registered first on the same router as the bucket
subrouter, so a path-style request such as GET /buckets?list-type=2 on
a bucket actually named "buckets" matched ListTableBuckets and returned
JSON. AWS SDK V2 (and Hadoop s3a / Spark) then failed XML parsing with
"Unexpected character '{' (code 123) in prolog".
Disambiguate by requiring the AWS V4 credential scope to name the
s3tables service on the colliding routes. Regular S3 SDKs sign with
service=s3, S3 Tables SDKs sign with service=s3tables, and the scope is
present in both the Authorization header and the X-Amz-Credential query
parameter for presigned URLs, so the matcher works for both flavors.
ARN-bearing S3 Tables routes (/buckets/<arn>, /namespaces/<arn>, etc.)
already cannot collide because colons are not valid in bucket names, so
they are left untouched.
* fix(s3): accept AWS JSON RPC content type as S3 Tables intent signal
The Iceberg catalog integration tests send unsigned PUT /buckets with
Content-Type: application/x-amz-json-1.1 to create table buckets. With
only the credential-scope check, those requests fell through to the
regular S3 CreateBucket handler and the suite went red on this branch.
Extend the matcher so a request is recognized as S3 Tables when either:
- its AWS V4 credential scope names SERVICE=s3tables; or
- it carries the canonical AWS JSON RPC 1.1 content type and is
unsigned (a request explicitly signed for SERVICE=s3 still wins).
The regular S3 SDKs do not send application/x-amz-json-1.1, so the
signal is safe for the colliding paths (/buckets, /get-table).
Also add an AWS SDK V2 for Go integration test under
test/s3/sdk_v2_routing/ that drives the SDK's own XML deserializer
against a bucket literally named "buckets" and "get-table" — the SDK
errors before the test asserts if the server returns the wrong body
shape. Wired up via .github/workflows/s3-sdk-v2-routing-tests.yml,
mirroring the etag/acl workflow.
* s3api: extend service matcher to all S3 Tables routes; simplify scope check
- Apply serviceMatcher to every S3 Tables route, not just the bare-path
ones. ARN-bearing paths could otherwise be hit by an S3 object key
that starts with arn:aws:s3tables:..., inside a bucket named
"buckets", "namespaces", "tables", or "tag". One matcher everywhere
closes both collision classes.
- Replace strings.Split + index lookup with strings.Contains for the
credential-scope check. The scope shape is fixed at
AK/DATE/REGION/SERVICE/aws4_request, slashes only delimit components,
and access keys are alphanumeric — so /s3tables/ matches iff SERVICE
is exactly s3tables. Existing unit cases (including the
access-key-substring case) still pass.
- Read the GetObject body in the SDK v2 routing test with io.ReadAll;
the single Read could return short and make the equality check flaky.
* s3api: drop content-type fallback; sign s3 tables harness traffic instead
The content-type fallback in isS3TablesSignedRequest let an anonymous
regular-S3 request whose body type is application/x-amz-json-1.1 hit
an S3 Tables route when the path-style object key happened to be
shaped like an S3 Tables ARN (e.g. PutObject on bucket "buckets"
with key arn:aws:s3tables:.../bucket/foo/policy). Narrow the matcher
back to the AWS V4 credential scope so only requests signed for
SERVICE=s3tables match the S3 Tables routes.
Update the Iceberg catalog test harness — the only caller still
sending unsigned PUT /buckets — to sign with SERVICE=s3tables. The
mini instance runs in default-allow mode, so the signature itself is
not verified; only the credential scope matters for the route match.
Drop the stale unit cases for the JSON-RPC content-type signal and
the routing test that exercised unsigned harness traffic.
* fix(volume): pass on-disk tombstone size to ReadData in verifyDeletedNeedleIntegrity
verifyDeletedNeedleIntegrity was forwarding TombstoneFileSize (-1) into
Needle.ReadData. A deletion tombstone is appended to .dat with DataSize=0
so the on-disk needle header carries Size=0; TombstoneFileSize is only
the .idx sentinel for "this entry is deleted" and is never written into
a needle header.
ReadBytes' size check therefore mismatched on every tombstone
(-1 != 0), returned ErrorSizeMismatch, and triggered the
4-byte-offset wrap-around retry in ReadData (offset + 32 GB). On any
volume large enough that offset+32 GB exceeds dat fileSize the retry
read EOF, CheckVolumeDataIntegrity reported corruption, and the loader
set noWriteOrDelete = true. Every volume whose last 10 .idx entries
included a deletion went read-only on startup — i.e. any healthy
volume where the most recent operations included a delete.
Pass Size(0) so the size check matches the on-disk tombstone header.
Add a regression test that writes three needles, deletes one, and
asserts CheckVolumeDataIntegrity succeeds with a tombstone at the .idx
tail. Without this fix the test reproduces the exact log shape from
the bug report:
read 0 dataSize 32 offset <orig+32GB> fileSize <much smaller>: EOF
verifyDeletedNeedleIntegrity ...idx failed: read data [N,N+32) : EOF
The Rust port guards its integrity-check size comparison with
!size.is_deleted() (seaweed-volume/src/storage/volume.rs) and never
hits this path, so no Rust mirror change is needed.
* test(seaweed-volume): mirror Go regression for deletion-tombstone integrity
The Rust integrity check already guards its size-mismatch comparison
with !size.is_deleted() (volume.rs:1859) and reads tombstone AppendAtNs
with body_size=0, so the Go regression fixed in the previous commit
does not apply. Lock that guarantee in with a parallel reload test:
write three needles, delete one, sync, reopen via Volume::new, assert
the volume is not flipped read-only.
Catches any future change that removes the deleted-entry guard or
re-introduces a size-strict path in check_volume_data_integrity for
tombstones.
* fix(volume): propagate io.EOF and ErrorSizeMismatch from verifyDeletedNeedleIntegrity
CheckVolumeDataIntegrity relies on identity comparison against io.EOF
and ErrorSizeMismatch to walk back through the last ten .idx entries
and tolerate a partial truncation at the tail (the "fix and continue"
loop). The live-needle branch in doCheckAndFixVolumeData already
returns those sentinels unwrapped; the deletion branch wrapped them
in fmt.Errorf, so a genuine .dat truncation past a tombstone offset
broke the recovery and flipped the volume read-only.
Mirror the live-needle handling: both verifyDeletedNeedleIntegrity
and doCheckAndFixVolumeData now short-circuit on io.EOF /
ErrorSizeMismatch and pass them through unwrapped. Other errors keep
their existing context wrapping.
Also tighten the regression test to capture lastAppendAtNs and assert
it's non-zero, so a future regression that skips the tombstone body
(and therefore never populates AppendAtNs) is caught even when the
err check still passes.
fix(s3): keep anonymous access working with EnableIam default
`docker run seaweedfs` (and `weed mini` with no config) start with
EnableIam=true but no IAM config file and no identities. The advanced-IAM
init path was failing in 4.25 because of the missing STS signing key,
which masked a latent bug: SetIAMIntegration unconditionally flipped
isAuthEnabled to true, and isEnabled() also treated a non-nil
iamIntegration as auth-on. Once the mini SSE-S3 KEK landed in 4.26 the
STS fallback started succeeding, the integration got installed end to
end, and every anonymous S3 request bounced as AccessDenied.
Separate the two concerns: SetIAMIntegration just plumbs in the OIDC /
embedded-IAM machinery, and a new EnableAuthEnforcement opts in to
enforcement. The startup path calls it only when -s3.iam.config is
actually provided, so operators with explicit IAM configs still get auth
(preserves #7726). isEnabled() now reads isAuthEnabled only.
* feat(filer): add atime field and TouchAccessTime RPC to filer proto
Introduce POSIX-style access-time tracking on the filer:
- FuseAttributes gains atime (field 22) and atime_ns (field 23).
- New TouchAccessTime RPC (and Touch{Access,Time}{Request,Response})
lets read paths bump atime without going through UpdateEntry's
chunk-rewrite/EqualEntry short-circuit.
Additive proto changes only; zero atime is treated as unset and
existing clients are unaffected. Java client proto is kept in lock
step.
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(filer): wire Atime through Attr codec with mtime fallback
Add Attr.Atime and round-trip it through EntryAttributeToPb /
EntryAttributeToExistingPb / PbToEntryAttribute. A zero proto atime
decodes as Mtime, so legacy entries report a sensible value and
freshly-created/updated entries default Atime to Mtime when callers
do not set it explicitly.
CreateEntry and UpdateEntry stamp Atime = Mtime (or Crtime) when it
is zero. TouchAccessTime later bypasses this path to write atime
alone via Store.UpdateEntry.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(filer): preserve atime in first epoch second on decode
The Atime decode branch previously treated any attr.Atime == 0 as
unset and overwrote it with Mtime, which drops valid timestamps in
the first second of the unix epoch where attr.Atime is 0 but
attr.AtimeNs > 0. Check both fields so we only fall back to Mtime
when both are zero.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Volumes written by versions before 3.09 (commit 056c480eb) store the
needle checksum using the deprecated CRC.Value() transform. When the
read path moved into readNeedleTail, the fallback that accepts both
encodings was dropped, so .dat files copied from old installs now fail
verification with "invalid CRC ... data on disk corrupted" even though
the data is intact. Restore the dual check, matching the surviving
fallback in volume_read.go.
* s3api: verify source permission on CopyObject and UploadPartCopy
The Auth middleware only authorized the destination because routes key on
the request URL. The source from X-Amz-Copy-Source was never evaluated,
so an STS session token scoped to one prefix could copy from any other
prefix in the same bucket.
Add AuthorizeCopySource on IdentityAccessManagement to run the full
bucket-policy + IAM/identity flow against the source, using a synthetic
GetObject request so action resolution lands on s3:GetObject (or
s3:GetObjectVersion when a source versionId is supplied). Both
CopyObjectHandler and CopyObjectPartHandler now invoke it before reading
the source.
* s3api: preserve presigned-URL session token on copy-source check
Presigned CopyObject / UploadPartCopy requests carry the STS session
token in the query string (X-Amz-Security-Token), not in a header.
Rebuilding the synthetic source URL from scratch dropped that token, so
the source authorization would fall through to non-STS paths and miss
session policy enforcement. Forward X-Amz-Security-Token from the
original query (alongside versionId), still excluding unrelated params
like uploadId/partNumber that would steer ResolveS3Action away from
s3:GetObject.
* fix(volume): reopen .idx writable after MarkVolumeWritable
When .vif has ReadOnly=true, load() opens .idx as O_RDONLY and builds a
SortedFileNeedleMap whose Put returns os.ErrInvalid. MarkVolumeWritable
only flipped noWriteOrDelete back to false and rewrote .vif, so writes
still failed at v.nm.Put. Reopen .idx in O_RDWR and rebuild v.nm in its
writable form (in-memory or leveldb small/medium/large) before flipping
the flag.
Mirror the same fix in seaweed-volume: the Rust load path leaves
CompactNeedleMap/RedbNeedleMap with no idx_file writer when the volume
boots read-only, so post-MarkVolumeWritable puts silently succeeded
in-memory only and were lost on the next restart. set_writable now
reattaches an append-mode writer when one is missing.
* fix(volume): keep old needle map until replacement is built; defer writable flag
Go: build the writable needle map into a local before swapping. A
construction failure now leaves v.nm pointing at the original
SortedFileNeedleMap so MarkVolumeWritable can roll back, instead of
stranding the volume with v.nm == nil.
Rust: attach the .idx writer before flipping no_write_or_delete to
false. A transient open/metadata failure used to leave the volume
marked writable with no writer attached, and subsequent puts would
silently skip the on-disk append.
* fix(admin): switch file browser upload/download to filer gRPC + volume HTTP
The admin file browser proxied uploads and downloads through the filer's
HTTP listener, so the whole feature 404'd against filers started with
-disableHttp=true even though S3 still worked on its own port. Re-route
through the filer gRPC service: LookupDirectoryEntry + StreamContent for
reads (chunks flow straight from the volume servers), AssignVolume +
volume HTTP POST + CreateEntry for writes. Volume read tokens come from
jwt.signing.read.key when configured; the old jwt.filer_signing tokens
no longer apply since the filer HTTP surface is bypassed.
* admin file browser: propagate request context + track response writes
Pass r.Context() into uploadFileToFiler so a client disconnect cancels
the in-flight chunked upload instead of letting it run to completion
against the volume servers. For DownloadFile, replace the Content-Type
probe with a small response-writer wrapper that records whether headers
or bytes have actually been sent, so the error path can't silently
convert a pre-stream failure into a partial response if future code
moves the header-setting around.
When s3.domainName is set, all bucket-prefix routes were gated on a
matching Host header. Requests that arrive via an IP, an unlisted
hostname, or a reverse proxy that rewrites Host hit no router and bounce
back as 405/404 (and 503 once a proxy maps the upstream error).
Register the path-style catch-all unconditionally, after the
host-specific routers, so it only fires when no Host matcher applies.
TaskSource and TaskTarget carry disk_id on the wire, but the execution
plan map built for the admin UI dropped the field entirely. On a
multi-disk node holding shards of the same volume, there was no way to
tell from the plan which disk would receive each shard. Include
disk_id on each endpoint and target_disk_id on each shard assignment,
and extend the existing execution-plan test to set and assert the
field.
Updated the README to reflect the current status of MinIO, noting its ceased development and security concerns, along with changes in the descriptions of its features compared to SeaweedFS.
* fix(ec_distribute): remove partial files on copy stream error
writeToFile opens the destination with O_TRUNC and streams into it. On
a mid-stream receive / write / cancellation error it returned the
failure but left the destination behind in whatever state had been
written so far — typically 0 bytes when the source errored before
sending any FileContent. VolumeEcShardsCopy distributes .ecx by
calling doCopyFile, so this same stub-leaving behaviour produced the
0-byte .ecx files seen on EC encoding failures: the source claims a
non-zero ModifiedTsNs (so the existing "source not found" cleanup
doesn't fire), the stream then errors immediately, and the receiver
ends up with a 0-byte .ecx that downstream code mistook for a valid
empty index.
Clean up the partial file on every error path that returns from the
streaming loop (receive, write, and cancellation). Skip cleanup when
isAppend=true so resumable appends keep their existing content. As
defense in depth, VolumeEcShardsCopy also stats the .ecx after copy
and removes / errors on a 0-byte result so the orchestrator can pick
a different source.
The Rust volume server has only the source side of CopyFile (no
client-side stream-to-disk consumer) and no .ecx subsystem yet, so
this fix has no Rust mirror.
* fix(ec_distribute): close file before remove, fail fast on stat error
Address review feedback:
- writeToFile's mid-stream removeIncomplete called os.Remove while the
destination file handle was still open. On Windows os.Remove fails
while a handle is open, so the cleanup wouldn't run there. Wrap the
handle close in a once-only helper, call it from removeIncomplete
and from the existing "source not found" cleanup, and keep a deferred
close as the safety net for the normal-return path.
- VolumeEcShardsCopy's post-copy .ecx check silently passed when
os.Stat returned an error: doCopyFile had reported success but if
the file was already gone, unreadable, or somehow a directory, the
orchestrator only learned at mount time with no useful context.
Treat any non-nil stat error and any directory result as a copy
failure here and surface it immediately.
* fix(ec_mount): reject 0-byte .ecx and aggregate cross-disk failures
MountEcShards's per-disk loop bailed on the first disk returning a
non-ENOENT error, and NewEcVolume wrapped its ENOENT with %v so the
caller's `err == os.ErrNotExist` check never matched. On a multi-disk
volume server where ec.balance / ec.rebuild had distributed shards
across sibling disks while the matching .ecx never arrived, the mount
loop bailed after disk 0 with "cannot open ec volume index" and the
operator never saw that the rest of the disks were also empty. The
companion failure mode is a 0-byte .ecx stub left by EC distribute's
writeToFile after a mid-stream copy failure: Stat() succeeds, treating
the stub as a valid index, and downstream mount work proceeds against
an empty file.
Wrap the ec-volume open errors with %w, treat a 0-byte .ecx as
os.ErrNotExist (in NewEcVolume, findEcxIdxDirForVolume, and
HasEcxFileOnDisk), and have MountEcShards collect per-disk failures
before returning a single aggregated error. The "no .ecx anywhere"
case gets a distinct error so the orchestrator can re-copy the index
from a healthy replica rather than retry against the same broken
state.
* fix(ec_reconcile): indexEcxOwners also rejects 0-byte .ecx stubs
findEcxIdxDirForVolume already skipped 0-byte .ecx during MountEcShards,
but indexEcxOwners (used by reconcileEcShardsAcrossDisks at startup)
still recorded the first .ecx by name only. On a store where one disk
holds a 0-byte stub left by a failed EC distribute and a sibling disk
holds the real index, the stub would win the owner selection — and
NewEcVolume's new size check would then refuse to load against it,
leaving the orphan shards unloaded even though a valid index exists.
Mirror the size check from findEcxIdxDirForVolume: skip directory
entries whose .ecx Info() reports size 0 or whose Info() call fails.
* fix(ec_mount): accept 0-byte .ecx as valid empty index
The previous commit treated a 0-byte .ecx in NewEcVolume as
os.ErrNotExist, on the assumption that any empty .ecx was a stub left
by a failed copy stream. That broke the legitimate empty-volume case:
when an EC volume's source .idx has no live entries (e.g. all needles
deleted before WriteSortedFileFromIdx), the sorted .ecx is genuinely
0 bytes and must mount. The integration test
TestEcShardsToVolumeMissingShardAndNoLiveEntries fails with
"MountEcShards: no .ecx index found on any local disk" because the
mount path now refuses the legitimate empty index.
A 0-byte .ecx left by a failed copy stream is indistinguishable from
the legitimate empty case by file size alone. Preventing stub files
from being written is the receiver-side cleanup in writeToFile's job
(the companion EC distribute PR), not NewEcVolume's at mount time.
The cross-disk lookup helpers (findEcxIdxDirForVolume, HasEcxFileOnDisk,
indexEcxOwners) keep their size > 0 preference: when a real .ecx
exists on a sibling disk alongside a stub, we still want to route
mounts and reconcile at the real one. If no non-zero .ecx exists
anywhere, the per-disk fallback in MountEcShards can still open the
0-byte .ecx and the volume mounts.
Replace TestMountEcShards_ZeroByteEcxOnlyDisk with
TestMountEcShards_EmptyEcxMountsSuccessfully, which pins the
empty-volume invariant.
* fix(volume.list): show one entry per physical disk on multi-disk nodes
DataNodeInfo.DiskInfos is keyed by disk type, so several same-type
physical disks on one node collapse to a single map entry at the master.
volume.list iterated that map directly and reported one "Disk hdd ...
id:0" line per node, hiding the per-disk volume and shard layout. EC
operators on multi-disk volume servers had no way to verify which
physical disk a shard landed on.
Lift the per-physical-disk split into a DiskInfo.SplitByPhysicalDisk()
method on the proto type so consumers outside admin/topology can use
it. Apply it in writeDataNodeInfo so the verbose Disk block shows one
entry per physical disk, ordered by DiskId. Capacity counters are
split evenly across reconstructed disks since the wire format doesn't
carry per-disk capacity yet.
This is a display-only change. ActiveTopology already did the split on
its own and is now updated to call the shared helper.
* fix(volume.list): preserve totals, count active/remote exactly, dedupe header
Address review feedback on the per-physical-disk split:
- share() truncated remainders so reconstructed per-disk counters could
sum to less than the original aggregate (10 / 3 = 3+3+3). Distribute
the remainder to the lowest disk ids so MaxVolumeCount and
FreeVolumeCount sum exactly back to the node totals.
- ActiveVolumeCount and RemoteVolumeCount are derivable per disk from
the VolumeInfos already grouped by DiskId, so count them exactly
(ReadOnly=false and RemoteStorageName!="" respectively) instead of
approximating with an even split.
- writeDataNodeInfo's per-disk callback fired the DataNode header on
every iteration after the split, so a node with 6 physical disks
emitted 6 DataNode headers. Guard the callback with headerPrinted so
the header still appears at most once per node.
- Sort split disks deterministically using explicit DiskId comparison
to avoid int overflow risk on 32-bit systems.
- Tighten the volume.list test substring to "id:N\n" so unrelated
tokens like "ec volume id:101" don't accidentally match the id:1
needle, and assert the rack callback fires once.
The 127.0.0.1-only reservation in AllocateMiniPorts/AllocatePortSet let
another process hold the gRPC port on a different interface, so weed
mini's isPortAvailable check failed and it shifted master.grpc. weed
shell -master=<HTTP> still derives grpc as HTTP+10000 and dialed the
unused port, hanging until the 30s context deadline killed it. Bind the
reservation listeners on :port to match mini's check.
Also bound listFilerContents in catalog_risingwave with a 30s
exec.CommandContext so a hung weed shell during failure-cleanup can't
burn the 20-minute test budget.
When jwt.filer_signing.key is set, the filer's IamGrpcServer requires
a Bearer token on every IAM RPC. The shell's s3.* IAM commands dialed
without that header and failed with Unauthenticated. Route them through
a small helper that mints a token from the same key viper-loaded from
security.toml and appends it as outgoing metadata, matching the credential
grpc_store pattern.
When weed filer started its embedded S3 gateway with -s3 -s3.config, only
the S3 server loaded the s3.json static identities — the filer's own
CredentialManager stayed empty, so the IAM gRPC service backing the admin
UI and weed shell returned only dynamic users. Mirror the wiring weed
server already does and hand the same config path to the filer.
fix(mount): don't release file handles from Forget
Forget(nodeid, nlookup) only decrements the kernel inode lookup count.
File handle lifecycle belongs to FUSE Open/Release. Driving the FH
refcount from Forget coupled two unrelated counters and could tear down
a still-live handle if Forget ever raced ahead of Release.
Drop the ReleaseByInode call (and the now-unused method).
* fix(iceberg): dial filer gRPC address verbatim in plugin worker
dialFiler was running its address argument through pb.ServerAddress.ToGrpcAddress,
whose single-port fallback adds +10000 to any host:port — so when the admin
forwards ClusterContext.FilerGrpcAddresses (already host:grpcPort) to the worker,
the iceberg handler turns the real gRPC port (e.g. 18888) into a non-existent
28888 and dispatched jobs fail with connection refused.
Drop the conversion; the address is already dialable. Tests that produced fake
filer addresses in dual-port form now return host:grpcPort to match the new
contract.
* test(ec): use renamed detection_interval_minutes field
The admin_runtime.detection_interval_seconds field was renamed to
detection_interval_minutes back in May. This integration test was not
updated, so the unknown JSON field was silently ignored and the scheduler
fell back to the default detection interval (17 min for erasure_coding),
which exceeds the test's 5-minute wait and times out.
Switch to detection_interval_minutes: 1 — local run completes in ~120s.
* fix(ec): mirror EC sidecars onto every shard-bearing disk at startup
In a multi-disk volume server, ec.balance and ec.rebuild can land shards
on a disk that does not also hold the matching .ecx / .ecj / .vif index
files. The orphan-shard reconciler in reconcileEcShardsAcrossDisks
already loads those shards by pointing the EcVolume at the sibling
disk's index files; reads work, but any failure on the index-owning
disk silently disables every shard on the other disk, even though those
shards are physically fine.
This change adds mirrorEcMetadataToShardDisks, a startup pass that
physically replicates .ecx / .ecj / .vif onto each disk that holds
shards but is missing them. Each copy is atomic (tmp + fsync + rename)
and idempotent (a destination that already has the sidecar is
preserved). After mirroring, the cross-disk reconciler prefers the
local IdxDirectory so the EcVolume mounts self-contained; the
cross-disk virtual mount remains as a fallback for volumes whose mirror
failed (read-only target, out of space, partial copy on a previous
boot).
The same-disk invariant the EC lifecycle (encode / decode / balance /
vacuum / repair) was already documented as promising is now actually
restored at boot, so a future failure of one disk in a split-shards
layout no longer takes the other disk's shards with it.
Tests cover the orphan-layout mirror (dir0 receives the .ecx / .ecj /
.vif from dir1) and idempotency (an existing destination .ecx is not
overwritten with the owner's copy).
* fix(ec): handle legacy pre-dir.idx sidecar layout in mirror skip-check
hasAllEcSidecarsLocally checked only the modern destination path
(IdxDirectory for .ecx/.ecj, Directory for .vif). A destination disk
that still had a legacy .ecx in its data dir (written before -dir.idx
was set) would report "not present" and the mirror would write a
second copy to IdxDirectory, leaving two .ecx files on disk.
Matches HasEcxFileOnDisk's open-with-fallback contract: check the
modern path first, then the opposite directory. Factored the
exists-and-not-a-dir check into a small statRegular helper so the
fallback ladder stays readable.
* rust(seaweed-volume): mirror EC sidecars onto shard-bearing disks at startup
Port of the Go fix (commit 088e26ea6) to the Rust volume server.
Adds Store::mirror_ec_metadata_to_shard_disks, called from
add_location / load_new_volumes before the cross-disk orphan
reconciler. Physically copies .ecx / .ecj / .vif from the disk that
owns the index files onto every disk holding shards but missing
sidecars, so each shard-bearing disk ends up self-contained.
The reconciler now prefers the local idx_directory when the mirror
has installed a .ecx there; the cross-disk virtual mount remains as
the fallback for volumes whose mirror failed (read-only target, out
of space, partial copy on a previous boot). Adds ec_local_ecx_path
helper shared between reconcile and mirror to detect the post-mirror
fast path.
Mirrors the Go-side fallback in hasAllEcSidecarsLocally: when
-dir.idx is configured and the destination still has a legacy .ecx
in its data dir, that's recognized so the mirror does not write a
duplicate copy into idx_directory.
Tests cover the two key cases: orphan layout (dir0 receives the
sidecars from dir1) and idempotency (a pre-existing destination .ecx
is not overwritten).
* trim verbose comments on EC mirror code
Comments now lead with the WHY (non-obvious constraints, the
post-mirror fast path, why local copies are authoritative) and drop
restate-the-code blocks, headers, and section dividers. Behavior is
unchanged; all existing tests still pass on both the Go volume
server and the seaweed-volume Rust port.
* drop github issue refs from added comments
Two stray "#9212" references slipped into comments I added on the
cross-disk reconciler call site. The git log carries the issue
history; comments stand on their own.
* test(ec): accept rebuild on either disk after sidecar mirror
TestEcLifecycleAcrossMultipleDisks asserted the rebuilt shard 9 must
land at the disk-0 path. With the boot-time sidecar mirror, every
shard-bearing disk owns its own .ecx, so VolumeEcShardsRebuild now
picks whichever disk hosts the most shards — disk 1 in this layout
after the deletion. The shard can legitimately rebuild on either
disk; the test now accepts both and uses the chosen path for the
subsequent mount + read verification.
* mini: quieter startup with a docker-compose-style progress board
Replaces noisy startup/shutdown logs with a single in-place progress
table on a TTY (or one line per state change off-TTY). Each component
renders as `pending -> starting -> ready` during startup and
`stopping -> stopped` during shutdown, with elapsed time on transition.
Also folds in a few cleanups uncovered while making this readable:
- route the admin.go startup prints through glog so quietMiniLogs()
filters them under mini but standalone weed admin still shows them
- generate a dev SSE-S3 KEK + passphrase on first run via WEED_S3_SSE_KEK
and WEED_S3_SSE_KEK_PASSPHRASE env vars (viper.Set has a nested-key
conflict between s3.sse.kek and s3.sse.kek.passphrase); persisted under
the data folder so restarts reuse the same key
- demote worker/master gRPC Recv 'context canceled' to V(1); those are
the normal shutdown signal, not Errors/Warnings
- drop the 'Optimized Settings' block and the 'credentials loaded from
environment variables' message from the welcome banner
- only show the credentials setup hints when no S3 identities exist
(new s3api.HasAnyIdentity accessor backed by an atomic.Bool)
- use S3_BUCKET in the credentials hint so it pairs with
AWS_ACCESS_KEY_ID / AWS_SECRET_ACCESS_KEY
- reorder running-services list to master / volume / filer / webdav /
s3 / iceberg / admin
* mini: refuse in-memory-only SSE-S3 dev keys; surface admin serve errors
loadOrCreateMiniHexSecret returns "" when os.WriteFile fails, so SSE-S3
won't encrypt data under a KEK that the next restart can't reproduce
(which would orphan whatever was written this run). The caller already
treats "" as "skip setting WEED_S3_SSE_* env vars", so SSE-S3 and IAM
just stay disabled for this run.
startAdminServer's serve goroutine used to only log ListenAndServe
failures, so a bind error left the caller blocked on ctx.Done() with
no listener. Forward the error through a buffered channel and select
on it alongside ctx.Done().
* ci(s3-proxy-signature): match weed mini's new progress-board ready line
The readiness probe grepped for "S3 (gateway|service).*(started|ready)",
which matched weed mini's old "S3 service is ready at ..." line. Mini
now emits " S3 ready (Xs)" from its progress board, so the
old pattern misses and the test timed out at the 30-second wait.
Widen the alternation to also accept "S3\s+ready". The curl HEAD
fallback already covers any remaining cases.
* iamapi: route managed policies through credential manager (fixes#9518)
CreatePolicy via the IAM API wrote straight to the filer
/etc/iam/policies.json, ignoring any non-filer credential store. When
credential.postgres was configured, policies created via the IAM API
landed only in the filer while the Admin UI wrote to postgres,
producing a split-brain where ListPolicies/GetPolicy never saw the
Admin UI's policies and vice versa.
GetPolicies/PutPolicies on IamS3ApiConfigure now load managed policies
from credentialManager and persist Create/Update/Delete as a delta
against the store. Inline user/group policies still live in the legacy
policies.json file (no credential-store API for them yet). Pre-existing
managed policies in the legacy file are merged on read so deployments
don't lose data, and re-persisted to the store on the next write so
the legacy file is drained over time.
* credential: route IAM API inline policies through credential manager
Extends the #9518 fix to user-inline and group-inline policies so the
IAM API never writes the legacy /etc/iam/policies.json bundle directly.
The previous patch only routed managed policies; this one finishes the
job for the other two policy types.
- Add GroupInlinePolicyStore + GroupInlinePoliciesLoader optional
interfaces, mirroring the existing user-inline ones, and matching
Put/Get/Delete/List/LoadAll wrappers on CredentialManager.
- Implement group-inline storage in memory (new map), filer_etc (new
field on PoliciesCollection, reusing the legacy file under policyMu),
and postgres (new group_inline_policies table with ON DELETE CASCADE
off the groups FK).
- Wire the new methods through PropagatingCredentialStore so wrapped
stores still delegate correctly.
- IamS3ApiConfigure.PutPolicies now applies managed + user-inline +
group-inline as deltas through the credential manager; the legacy
/etc/iam/policies.json file is never written when a credential
manager is wired up. GetPolicies still reads the legacy bundle once
as a fallback so unmigrated data is picked up and re-persisted into
the store on the next write.
* credential: propagate SaveConfiguration writes to running S3 caches
Postgres (and any non-filer) credential stores never fired the S3 IAM
cache invalidation path on bulk identity / group updates. The
PropagatingCredentialStore had explicit Put/Remove handlers for
single-entity calls (CreateUser, PutPolicy, etc.) but inherited
SaveConfiguration unchanged from the embedded store, so the bulk path
the IAM API takes at the end of every handler was silent. Inline-policy
changes recompute identity.Actions and persist via SaveConfiguration,
so until restart the cached Actions on each S3 server stayed stale and
authorization decisions used the pre-change view.
Override SaveConfiguration to snapshot the prior user / group lists,
delegate the save, then fan out PutIdentity / PutGroup for what's in
the new config and RemoveIdentity / RemoveGroup for what got pruned.
Reuses the existing SeaweedS3IamCache RPCs, no protobuf changes.
* iamapi: drain legacy policies.json after authoritative credential-store writes
Review pointed out a resurrection bug: GetPolicies still reads
/etc/iam/policies.json as a one-way migration fallback, but PutPolicies
in the credential-manager path never wrote that file, so legacy-only
entries reappeared on the next read even after the IAM API "deleted"
them. PutPolicies now overwrites the bundle with an empty {} after a
successful credential-store write, unless the store is filer_etc
(which owns the bundle as its own inline-policy backing — clearing it
would wipe filer_etc's data). Also wraps the filer read, JSON
unmarshal, and marshal errors with context per the other review
comments.
The master returns each registered filer in pb.ServerAddress dual-port
form (host:httpPort.grpcPort, e.g. 10.0.0.1:8888.18888). The admin's
plugin context builder forwarded that string verbatim as
filer_grpc_address, so workers calling grpc.DialContext on it failed
every job in ~3ms with "dial tcp: lookup tcp/8888.18888: unknown port".
Run each entry through pb.ServerAddress.ToGrpcAddress before populating
ClusterContext.FilerGrpcAddresses.
The lifecycle integration test now pins filer.port.grpc to a value that
breaks the FILER_PORT+10000 assumption, and a new dispatch test drives
the admin's /api/plugin/job-types/s3_lifecycle/run path end-to-end and
asserts the dispatched job both reaches the filer and deletes the
backdated object.
* fix(ec): blanket-clean every destination over the full shard range
The previous cleanup pass walked t.sources only, with the shard ids the
topology had reported at detection time. In the wild, a destination can
end up with EC shards mounted that the topology snapshot didn't list —
shards on a sibling disk that hadn't heartbeated, or shards left over
from a concurrent attempt's mount step. FindEcVolume still returns
true, so the next ReceiveFile trips the mounted-volume guard.
Cleanup now unions t.sources (with ShardIds) and t.targets and issues
unmount + delete over [0..totalShards-1] on each. Both RPCs are
idempotent on missing shards, so the wider sweep is free.
Two new tests cover the gap: shards mounted beyond what t.sources
lists, and a target-only destination with no source row.
* log(ec): include disk_id in EC unmount/delete/refusal log lines
The current logs identify the volume and shard but leave disk_id off,
which makes the cross-server cleanup story hard to follow when
multiple disks of one server hold pieces of the same volume:
UnmountEcShards 4121.1 -> add disk_id
ec volume video-recordings_4121 shard delete [1 5] -> add per-loc disk_id
volume server X:Y deletes ec shards from 4121 [...] -> add disk_id
ReceiveFile: ec volume 4121 is mounted; refusing... -> add disk_ids
ReceiveFile's refusal now names the disk_ids actually holding the
mount so operators can see whether the next cleanup pass needs to
target a sibling disk. Added Store.FindEcVolumeDiskIds /
Store::find_ec_volume_disk_ids as the supporting primitive.
Mirrored in seaweed-volume/src/ (unmount log in Store::unmount_ec_shard,
heartbeat delete log in diff_ec_shard_delta_messages, refusal in the
ReceiveFile handler).
* test(ec): stub VolumeEcShardsUnmount/Delete on the fake volume server
The plugin-worker EC tests boot a fake volume server that embeds
UnimplementedVolumeServerServer. After the worker started calling
VolumeEcShardsUnmount + VolumeEcShardsDelete pre-distribute, the
default Unimplemented response surfaced as fourteen "method not
implemented" errors and TestErasureCodingExecutionEncodesShards
failed. Both RPCs are no-ops here — nothing on the fake server has
mounted state or persisted shard files to remove.
* fix(ec): mount falls back to sibling-disk .ecx (fixes#9519)
MountEcShards iterated DiskLocations and on each disk called LoadEcShard
with that disk's IdxDirectory as the .ecx home. When ec.balance lands the
.ec?? shard on disk A but the .ecx on sibling disk B of the same volume
server, NewEcVolume ENOENTs the .ecx and returns "cannot open ec volume
index ...". That error is not os.ErrNotExist, so the per-disk continue
branch did not engage and the mount loop bailed before trying any other
disk.
The startup reconciliation in reconcileEcShardsAcrossDisks already
handles this layout for orphan shards discovered on boot (issue #9212).
This change mirrors the same primitive on the mount path: look up the
.ecx owner across all DiskLocations once and route NewEcVolume at that
directory whenever the disk being mounted does not own its own copy of
the .ecx. Same-disk mounts are unaffected because HasEcxFileOnDisk keeps
LocalIdxDirectory in play.
Adds a regression test that plants the index files on a sibling disk
AFTER NewStore returns (so the startup reconcile is a no-op for that
vid) and verifies MountEcShards succeeds; also pins the same-disk
baseline against accidental re-routing.
* fix(ec): skip redundant stats in cross-disk .ecx lookup (review)
Two follow-ups from gemini-code-assist on #9521:
1. MountEcShards: when findEcxIdxDirForVolume already returned a path
that lives on this disk's IdxDirectory or Directory, the disk owns
the .ecx — skip the HasEcxFileOnDisk stat and use the local idx dir
directly. Only re-check when the disk's directories are neither, so
the duplicate-.ecx-on-multiple-disks edge case is still honored.
2. findEcxIdxDirForVolume: hoist the seen map across the location loop
so a shared IdxDirectory (one -dir.idx paired with several -dir
entries) is only stat'd once per call.
Both are I/O optimizations; behavior is unchanged. Existing
cross-disk and same-disk regression tests still pass.
* docs(ec): drop issue/PR references from cross-disk mount comments
Comments and test docstrings stand on their own; the issue number
adds nothing a reader can act on and goes stale across forks. Keep
the description of *what* the layout is and *why* the fallback
exists, just without the reference.
* feat(seaweed-volume): distributed EC read across peer servers
EcVolume::read_ec_shard_needle previously errored with NotFound when
any interval's shard wasn't local. In an RS(10,4)-across-N deployment
each server holds one shard, so every read needed >=9 peer fetches and
post-EC GETs returned 404 on volumes whose shards lived on more than
one server.
Mirror of weed/storage/store_ec.go's readOneEcShardInterval ->
readRemoteEcShardInterval -> recoverOneRemoteEcShardInterval chain:
* server/store_ec.rs (new): entry point
read_ec_shard_needle_distributed. Snapshots locate-needle + local
reads under the Store sync lock, drops the lock, then async-fetches
missing intervals via the peer's VolumeEcShardRead RPC. Falls back
to Reed-Solomon reconstruction (read every other shard at the same
(shard_offset, size) and run rs.reconstruct) when the direct peer
read fails. Refreshes the per-EcVolume shard_locations cache from
the master's LookupEcVolume RPC using Go's freshness thresholds
(11s / 7min / 37min).
* erasure_coding/ec_volume.rs: shard_locations now sits behind a
std::sync::RwLock so the read path can refresh the map without
holding the Store write lock. Adds shard_locations_refresh_time
(Mutex<Option<Instant>>) for the staleness heuristic. Mirrors Go's
ShardLocationsLock / ShardLocationsRefreshTime fields. set/get
helpers updated for interior mutability.
* server/handlers.rs: GET handler now tries the local-only fast
path first, then falls through to the distributed path on
NotFound.
* review: address PR 9516 feedback on distributed EC read
Five of the six PR-review comments addressed; the sixth (JWT on
outgoing peer gRPC) is deferred with an explicit TODO because the
crate-wide outgoing-JWT signing surface doesn't exist yet — adding it
in this one call site would split the credential plumbing across
peer paths that already lack it (copy_file_from_source, batch_delete,
…). Revisit when an outgoing-JWT helper lands.
Fixed in this commit:
* Handlers: drop the two-tier (local-first, then distributed)
read in handlers.rs. read_ec_shard_needle_distributed already
does the local-first pass under the same store read lock; the
redundant outer attempt re-read local intervals twice for any
needle that spanned mixed-locality shards.
* Scanner snapshot: replace inline locate-needle math with
`ecv.locate_needle(needle_id)`. Same routine the local-only
read path uses, so byte-identical on shard-size + interval
boundaries.
* EcVolume::set_shard_locations also advances
shard_locations_refresh_time so the staleness check honors
callers that populate the cache directly without going through
the master LookupEcVolume RPC.
* parse_grpc_address moved from grpc_server.rs into
grpc_client.rs as `pub` and is reused by both grpc_server.rs
and the new store_ec module. Single source of truth for the
HTTP↔gRPC port-offset convention.
* Reconstruction (recover_one_remote_ec_shard_interval) now seeds
bufs from locally-mounted survivor shards BEFORE the remote
fan-out. Previously the fan-out was remote-only, so when the
shard_locations cache was cold or the master lookup failed,
reconstruction errored even though enough siblings were on
local disk to recover the missing interval.
* review: tighten parse_grpc_address; atomic shard-locations cache swap
Two follow-up findings from the PR 9516 review round 2:
* `parse_grpc_address` now validates BOTH port components in the
dotted form (`host:port.grpcPort`) — previously a non-numeric
HTTP port like `host:abc.18080` slipped through and tripped a
less-useful downstream URI parse error. The implicit form
(`host:port` → port + 10000) also gains an overflow check so
inputs like `host:60000` (which silently wrap past u16) are
rejected here instead of producing an opaque connection
failure later. Six unit tests cover each rejection path.
* `EcVolume::set_shard_locations` no longer bumps the per-volume
refresh timestamp. The previous fix introduced a freshness
race: a multi-shard population that inserts shard-by-shard
would flip `needs_refresh == false` on the first write, letting
a concurrent reader observe a half-populated map already
marked "fresh" and return NotFound for the not-yet-inserted
shards. Added `EcVolume::replace_shard_locations(map)` for the
atomic bulk swap; `write_back_shard_locations` in the
distributed-read path uses it so the cache transitions
old → fresh in a single observable step.
* helm(admin): support secretExtraEnvironmentVars
The admin statefulset only honored extraEnvironmentVars, forcing the
OIDC client secret (and any other sensitive WEED_* value) to be inlined
as plain text in values.yaml — not GitOps-friendly. The filer chart has
had secretExtraEnvironmentVars for this exact case; mirror that pattern
on admin so secrets can be projected via valueFrom.secretKeyRef.
Surfaced by an enterprise OIDC deployment (issue #9511) where the only
workaround was hardcoding WEED_ADMIN_OIDC_CLIENT_SECRET in values.yaml.
* helm(admin): sort secretExtraEnvironmentVars keys for stable output
Helm/Go template map iteration is non-deterministic, so the env entries
could shuffle between renders and trigger spurious StatefulSet rollouts
in GitOps tooling (ArgoCD/Flux). Sort the keys with sortAlpha, mirroring
the extraEnvironmentVars block immediately above.
Flagged by gemini-code-assist and coderabbitai on PR #9513.
PR #9442 made the filer refuse to register the IAM gRPC service unless
jwt.filer_signing.key was set in security.toml, which broke the admin
UI Users/Groups/Policies pages for every deployment that ships without
a security.toml — weed mini, plain Helm, vanilla weed filer. The Users
tab returns Unimplemented and the page is unusable. Issues #9504,
#9505 and #9509 all trace to this gap.
The rest of the filer's gRPC surface is unauthenticated by default;
treat IAM the same way. The service now always registers, and the
auth gate is a no-op when no signing key is configured. When the key
is set, every RPC still requires an admin-signed Bearer token, matching
the post-#9442 behaviour. Operators who expose the filer gRPC port
beyond a trusted network should set the key on both filer and admin.
The admin client (IamGrpcStore.withIamClient) already skips attaching
the authorization metadata when its key is empty, so no changes there.
* helm(security): decouple JWT signing from cert-manager mTLS
The filer needs jwt.filer_signing.key to register the IAM gRPC service the
Admin UI Users tab calls (PR #9442). The chart only rendered security.toml
under enableSecurity, which also pulls in cert-manager for mTLS — much heavier
than the Admin UI needs. Operators on Helm without cert-manager have no way
to flip the JWT key on, so the Users tab fails with Unimplemented after
upgrading past 4.24.
Introduce seaweedfs.securityConfigEnabled, true when enableSecurity OR any
explicit jwtSigning toggle (volumeRead/filerWrite/filerRead) is set. The
configmap renders under that helper; the [grpc.*]/[https.*] sections inside
stay gated on enableSecurity. Each pod template splits the security-config
mount onto the helper and keeps the cert volume mounts on enableSecurity.
volumeWrite is intentionally excluded from the helper trigger because it
defaults to true; including it would silently start mounting security.toml on
every fresh install. With this change, enableSecurity=false + defaults
renders nothing (unchanged), enableSecurity=true renders the full toml
(unchanged), and enableSecurity=false + filerWrite=true renders just the
[jwt.*] sections so the Admin UI works without mTLS.
Fixes#9506.
* helm(security): trim verbose comments
* helm(security): handle null securityConfig in helper
Address review feedback: (.Values.global.seaweedfs.securityConfig).jwtSigning
errored if a user explicitly set securityConfig: null in their values. Drop
into intermediate $sec/$jwt with default dict at each step so a missing or
nulled-out parent is tolerated.
* helm(ci): cover IAM gRPC decoupling (issue #9506)
Five regression assertions exercised against the rendered chart so a
future change cannot silently re-couple jwt.filer_signing to mTLS:
1. defaults render no security-config ConfigMap (preserves baseline)
2. filerWrite=true alone renders [jwt.filer_signing] with no [grpc.*]
3. filerWrite=true mounts security-config on filer + admin without
pulling in cert volumes — the actual fix for the Admin UI Users tab
4. enableSecurity=true still produces the full toml with [grpc.master]
5. securityConfig=null and securityConfig.jwtSigning=null both render
cleanly (gemini-code-assist review nit, applied chart-wide)
Patch a pre-existing direct-access in filer-statefulset.yaml that
crashed on securityConfig=null, surfaced by the new null assertion.
* helm(ci): drop issue numbers from comments
* helm(ci): install pyyaml; assert [jwt.signing] in mTLS path
Address coderabbit review:
- The new IAM gRPC test block uses `import yaml` but ran before the
later `pip install pyyaml -q` step that the security+S3 block
performs. CI happens to pass because the runner image carries
PyYAML, but make the dependency explicit so a future runner change
cannot silently break the regression test.
- The enableSecurity=true assertion only checked for [grpc.master].
Also assert [jwt.signing] so a refactor that drops the volume-side
JWT stanza from the mTLS path fails the test instead of slipping
through.
fix(tests): make 32-bit GOARCH tests build and run (#9503)
verifyTestFilerClient had bare int64 atomic counters after a map header,
so atomic.AddInt64 panicked with "unaligned 64-bit atomic operation" on
linux/386. Switch to atomic.Int64, which the stdlib guarantees is
8-byte aligned on all platforms.
rpc_version_filter_test.go passed the untyped constant 0xdeadbeef to
t.Errorf, where it default-promoted to int and overflowed 32-bit int.
Bind it to a typed uint32 const used in both the comparison and the
error message.
* fix(ec): clear cross-server stale EC shards before re-distribute (#9478)
A previous failed encode leaves partial .ec?? shards mounted on
destination volume servers that are not the .dat owner. PR #9480 only
prunes when the .dat sits on a sibling disk of the SAME store, so the
cross-server case stays stuck: every retry trips
volume_grpc_copy.go:570's "ec volume %d is mounted; refusing overwrite"
guard and the scheduler loops.
Detection already lists existing EC shards as CleanupECShards sources;
plumb the shard ids through (ActiveTopology.GetECShardLocations,
TaskSourceSpec, TaskSource.shard_ids) and have the EC worker call
VolumeEcShardsUnmount + VolumeEcShardsDelete on each destination after
the local shard set is generated and before distributeEcShards. Skip
EC-shard sources in getReplicas so the post-encode VolumeDelete step
does not target destination-only nodes.
Integration test mounts a partial shard subset, asserts the
mounted-volume refusal, runs cleanupStaleEcShards, and asserts the
next ReceiveFile lands.
* chore(ec): tighten code comments in stale-shard cleanup
Drop issue-number refs from code comments and shorten the docstrings
on cleanupStaleEcShards / unmountAndDeleteEcShards / getReplicas plus
the new test file. Behavior unchanged.
* fix(ec): skip empty-ShardIds locations; dedupe getReplicas by node
GetECShardLocations dropped entries where ecShardMatchesCollection saw a
phantom info record with EcIndexBits=0 — without ShardIds, getReplicas
misread the resulting source as a regular replica and would have called
VolumeDelete on a destination-only node.
getReplicas now dedupes by Node since VolumeDelete is server-wide;
per-disk source rows on the same server collapse to one call.
* refactor(ec): use MaxShardCount and ShardBits in collectShardIdsForDisk
Drop the literal 32 bit-iteration bound for erasure_coding.MaxShardCount
and treat the EcIndexBits union as a ShardBits so Count() drives the
slice preallocation. Keeps the helper aligned with the rest of the EC
code and survives any future expansion of the shard-count ceiling.
The separate container_latest.yml workflow rebuilt the latest image from
scratch on every tag push (full multi-arch build + QEMU + trivy gate),
which is slow and frequently fails — leaving `latest` stranded on the
prior release (e.g. 4.23 after 4.24 shipped, #9497).
Drop the rebuild. The unified release workflow already publishes the
exact same content as `<tag>` and `<tag>_large_disk`, so just re-tag
those manifests with `crane tag` on both GHCR and Docker Hub once
copy-to-dockerhub completes. Seconds, not hours, and no QEMU.
Move the trivy scan into the unified workflow as report-only: SARIF
still uploads to GitHub Security for visibility, but vuln findings
no longer block the release.
container_latest.yml stays as a workflow_dispatch-only manual fallback.
Refs #9497.
* admin: attach admin-signed Bearer token on filer IAM gRPC calls
PR #9442 added Bearer-JWT enforcement on the filer's IAM gRPC service
but didn't update its only production client, IamGrpcStore. The admin
UI Users/Groups pages went through that client and started failing in
4.24 with either Unimplemented (filer refuses to register the service
when jwt.filer_signing.key is empty) or Unauthenticated (the client
sent no token). Issues #9495 and #9496 both trace to this gap.
Plumb jwt.filer_signing.key into IamGrpcStore via a new SetAdminSigning
hook called from the admin server, and append a freshly minted Bearer
token to outgoing metadata on every call. The mint helper
security.GenJwtForFilerAdmin existed since #9442 but had no production
caller; this wires it up.
Add an integration test alongside grpc_store.go that runs a real
IamGrpcServer over a real grpc.Server listener and exercises the store
end-to-end: matching key succeeds, wrong key returns Unauthenticated,
no key returns Unauthenticated. Without the client-side token attach
the success path fails, so the regression cannot land again.
* address review: include adminSigningExpiresAfterSec in mu comment
thrift v0.23.0 uses math.MaxUint32 as an untyped int constant in
lib/go/thrift/framed_transport.go:206, which overflows int on 32-bit
targets (openbsd/arm, linux/arm, freebsd/arm, netbsd/arm) and breaks
the release binary builds.
* fix(ec): verify full shard set before deleting source volume (#9490)
Before this change, both the worker EC task and the shell ec.encode
command would delete the source .dat as soon as MountEcShards returned —
even if distribute/mount failed partway, leaving fewer than 14 shards
in the cluster. The deletion was logged at V(2), so by the time someone
noticed missing data the only trace was a 0-byte .dat synthesized by
disk_location at next restart.
- Worker path adds Step 6: poll VolumeEcShardsInfo on every destination,
union the bitmaps, and refuse to call deleteOriginalVolume unless all
TotalShardsCount distinct shard ids are observed. A failed gate leaves
the source readonly so the next detection scan can retry.
- Shell ec.encode adds the same gate after EcBalance, walking the master
topology with collectEcNodeShardsInfo.
- VolumeDelete RPC success and .dat/.idx unlinks now log at V(0) so any
source destruction is traceable in default-verbosity production logs.
The EC-balance-vs-in-flight-encode race is intentionally left for a
follow-up; balance should refuse to move shards for a volume whose
encode job is not in Completed state.
* fix(ec): trim doc comments on the new shard-verification path
Drop WHAT-describing godoc on freshly added helpers; keep only the WHY
notes (query-error policy in VerifyShardsAcrossServers, the #9490
reference at the call sites).
* fix(ec): drop issue-number anchors from new comments
Issue references age poorly — the why behind each comment already
stands on its own.
* fix(ec): parametrize RequireFullShardSet on totalShards
Take totalShards as an argument instead of reading the package-level
TotalShardsCount constant. The OSS callers continue to pass 14, but the
helper is now usable with any DataShards+ParityShards ratio.
* test(plugin_workers): make fake volume server respond to VolumeEcShardsInfo
The new pre-delete verification gate calls VolumeEcShardsInfo on every
destination after mount, and the fake server's UnimplementedVolumeServer
returns Unimplemented — the verifier read that as zero shards on every
node and aborted source deletion. Build the response from recorded
mount requests so the integration test exercises the gate end-to-end.
* fix(rust/volume): log .dat/.idx unlink with size in remove_volume_files
Mirror the Go-side change in weed/storage/volume_write.go: stat each
file before removing and emit an info-level log for .dat/.idx so a
destructive call is always traceable. The OSS Rust crate previously
unlinked them silently.
* fix(ec/decode): verify regenerated .dat before deleting EC shards
After mountDecodedVolume succeeds, the previous code immediately
unmounts and deletes every EC shard. A silent failure in generate or
mount could leave the cluster with neither shards nor a valid normal
volume. Probe ReadVolumeFileStatus on the target and refuse to proceed
if dat or idx is 0 bytes.
Also make the fake volume server's VolumeEcShardsInfo reflect whichever
shard files exist on disk (seeded for tests as well as mounted via
RPC), so the new gate can be exercised end-to-end.
* fix(ec): address PR review nits in verification + fake server
- Drop unused ServerShardInventory.Sizes field.
- Skip shard ids >= MaxShardCount before bitmap Set so the ShardBits
bound is explicit (Set already no-ops on overflow, this is for
clarity).
- Nil-guard the fake server's VolumeEcShardsInfo so a malformed call
doesn't panic the test process.
* refactor(s3/lifecycle): drop Per-Run Time Limit knob; use scheduler's Execution Timeout
"Per-Run Time Limit (minutes)" duplicated the admin scheduler's
"Execution Timeout (s)" — both are wall-clock caps on the same
Execute call, stacked via context.WithTimeout. Whichever was shorter
won. Under defaults the scheduler's 90s timeout always clobbered the
worker's 60-min cap, so the "Per-Run Time Limit" knob was effectively
dead unless an operator also raised Execution Timeout, and operators
had to keep two values in agreement.
Remove the worker-side knob and declare a sane scheduler default on
the handler descriptor:
- WorkerConfigForm: nil (was: one section with one field)
- Config.MaxRuntime removed; ParseConfig drops max_runtime_minutes
- Handler no longer wraps ctx in context.WithTimeout(MaxRuntime);
runCtx is just the ctx the scheduler passes
- AdminRuntimeDefaults.ExecutionTimeoutSeconds = 3600 (1h) and
JobTypeMaxRuntimeSeconds = 3600 — the scheduler's global 90s
default would otherwise kill every real run
Tests:
- TestParseConfigDefaults loses the MaxRuntime check; new
TestParseConfigIgnoresWorkerValues documents the contract
- TestDescriptor_WorkerConfigFormIsAbsent pins that the form is gone
so a future re-add forces a conscious revisit
- TestDescriptor_AdminRuntimeDefaultsBoundExecutionTimeout pins the
1h default with a comment about the 90s scheduler floor
* fix(s3/lifecycle): no per-pass timeout by default
Lifecycle is a scheduled batch — its natural duration is "as long as
today's events take." The 1h default ExecutionTimeoutSeconds from the
previous commit was still a footgun: too low truncates legitimate
large-bucket passes; too high makes the value meaningless.
Set both ExecutionTimeoutSeconds and JobTypeMaxRuntimeSeconds to
math.MaxInt32 (~68 years) to say "no timeout in practice" in a
code-review-readable way. Operators who genuinely want a wall-clock
cap can set one in the admin UI; the scheduler's context.WithTimeout
machinery is unchanged (we just hand it an effectively-infinite
duration).
Note: the scheduler floors ExecutionTimeout at 90s
(defaultScheduledExecutionTimeout in weed/admin/plugin/plugin_scheduler.go),
so 0 doesn't mean "unlimited" — it clamps back to 90s. A literal
math.MaxInt32 is the way to express the intent without touching the
shared scheduler code.
Test updated to pin math.MaxInt32 and document the rationale so a
future tighter cap fails the test and forces conscious revisit.
* docs(s3/lifecycle): refresh DESIGN.md as-built + add wiki pages
DESIGN.md was written as a phased implementation plan ("Phase 2 will
ship X, Phase 4 will ship Y"). All phases are now merged, plus the
post-cutover changes from #9477/#9481/#9484/#9485/#9486 substantially
changed the worker model (single subscription, walker throttle,
observability gauges). Rewrite the doc in present tense describing
what's actually there.
Net changes vs the prior plan-style doc:
- Algorithm pseudo-code reflects the single-subscription fan-out plus
walkedThisPass within-pass guard.
- Walker invocation table replaces the implicit "two distinct calls"
prose with three call sites (recovery / steady-state / empty-replay)
and their throttle gates.
- New section on the subscription model (one Reader, ShardPredicate,
fan-out by ev.ShardID).
- New section on cursor.LastWalkedNs and the WalkerInterval throttle.
- Observability section: gauges, heartbeat tokens, what each means.
- "Implementation history" table maps phases to merged PRs.
- "Future work" lists the four optimizations we deferred (long-lived
subscription, bucket-coordinated walker, per-bucket lag metric,
filer meta-log retention).
Drop the "Phase N — ..." narrative from the bottom; the PR history
table is the durable artifact now.
Add wiki pages under docs/wiki/s3-lifecycle/ as source-of-truth for
the operator-facing docs. README explains the sync workflow with the
external seaweedfs.wiki.git repo. Five pages:
- Home.md — landing page, supported rule shapes, what the worker does
- Operator-Guide.md — config knobs, when to change each, walker
interval recommendations by cluster size
- Monitoring.md — Prometheus metric reference + heartbeat token table
+ suggested PromQL alerts
- Troubleshooting.md — stuck cursor, walker stuck, failure outcomes,
cursor schema for manual inspection
- Architecture.md — high-level overview for newcomers; sits between
Home.md (operator) and DESIGN.md (developer)
* docs(s3/lifecycle): address PR review feedback on docs
Coderabbit + gemini findings on #9491:
- Monitoring.md: clarify the "matches all dispatched" phrasing; note
that LIFECYCLE_DELETE_OUTCOME_UNSPECIFIED is the proto zero-value
(shouldn't appear in healthy systems); filter PromQL alerts to
ignore zero-valued gauges so fresh-install heartbeats don't trip.
- Operator-Guide.md, Troubleshooting.md: clarify weed shell -master
format as host:http_port.grpc_port (SeaweedFS ServerAddress).
- Troubleshooting.md: pause the s3_lifecycle job in the admin UI
before manually editing a cursor file, otherwise the worker's
save races with the operator's edit.
- Architecture.md, Home.md, Operator-Guide.md, Monitoring.md,
Troubleshooting.md, DESIGN.md: add language tags (`text`) to
fenced code blocks for markdownlint MD040 compliance.
- DESIGN.md: standardize on the S3 spec rule names
(`ExpiredObjectDeleteMarker`, `NewerNoncurrentVersions`,
`AbortIncompleteMultipartUpload`) and add a one-line note mapping
them to the engine's `ActionKind*` constants.
- README.md: prepend `cd "$(git rev-parse --show-toplevel)"` to the
sync workflow so the `cp` commands' repo-root-relative paths work
whether the operator's shell is at the repo root or at
docs/wiki/s3-lifecycle/.
- Home.md: was lagging the wiki-repo merged version (had the older
pre-merge content). Re-sync from the wiki repo so source matches.
* docs(s3/lifecycle): remove wiki pages from PR
The wiki pages belong in seaweedfs.wiki.git, not the main repo. The
source-of-truth concern that motivated adding them here is real but
the cost — every code-review touchpoint requires reviewers to load
operator-facing pages too — outweighs it. The wiki pages are already
pushed locally (~/dev/seaweedfs.wiki); they'll publish on the
operator-side workflow.
This PR remains scoped to DESIGN.md (the developer-facing reference
that does belong with the code).
* docs(s3/lifecycle): drop Implementation history section
git log is the durable record of what shipped when; the prose table
duplicates it and goes stale faster than commit metadata.
* docs(s3/lifecycle): soften 'exactly once per run' in Goal
The prior phrasing overstated the guarantee versus the failure model
documented later in the same file. Reword to: 'process due objects
each pass; retryable/blocked outcomes get retried from the cursor on
later runs.' Surfaces the head-of-line-blocking semantics up front so
the rest of the doc reads consistently.
Also: drop the stale 'see docs/wiki/s3-lifecycle/' pointer — those
pages live in the wiki repo, not the main repo.
S3 lifecycle is a standard bucket feature — operators set
PutBucketLifecycleConfiguration through the S3 API expecting the
configured expirations to actually fire. With the prior default
(scheduler enabled=false), buckets with lifecycle XML silently
retained data past their declared expiration until an operator
noticed and turned the scheduler on.
The failure mode of enabled-by-default is "worker runs every day
and fast-exits on buckets with no lifecycle rules" — cheap.
The failure mode of disabled-by-default is "data lingers, looks
like it expired, doesn't" — bad. Enabled-by-default matches both
the AWS S3 default behavior and the operator's natural mental
model.
Operators who want the worker off can still disable it via the
admin UI; once a persisted config exists, this descriptor default
no longer applies (the persisted Enabled state wins).
Test pins the choice so a future flip to false fails loud.
Operator visibility was the last item on the daily-replay must-have
list. The `S3LifecycleCursorMinTsNs` gauge already existed but nothing
ever set it — leftover from the streaming worker that got deleted.
Wire it up and add a parallel one for the walker so a single PromQL
query answers "is this thing working?":
- `cursor_min_ts_ns{shard}` set after each cursor save. Operators read
`now - cursor_min_ts_ns` as the per-shard replay lag.
- `daily_run_last_walked_ns{shard}` new — set in parallel so operators
can confirm WalkerInterval is actually being honored. A stuck value
means the scheduler isn't invoking the worker, the throttle is too
long, or the walker is failing.
- saveCursorAndPublish wraps every Save call site in runShard so the
gauges and the persisted state stay aligned (gauges only advance on
successful saves).
- Enhance the `daily_run: status=... duration=...` heartbeat with
`cursor_lag_max=` and `walked_max_age=` summary tokens for ops grep.
Existing tokens stay positional-stable; new ones append at the end.
Marker `cold` distinguishes "not started" from "0s caught up."
Tests pin the summary line: cold-start state, max-across-shards
selection, and partial-fill (some shards drained, others walked).
Stacked on #9485.
* feat(s3/lifecycle): throttle steady-state walker by cfg.WalkerInterval
The steady-state and empty-replay walker fired on every dailyrun.Run
invocation, which is fine when Run is called at the bucket-walk cadence
the operator intends (e.g., once per hour or once per day), but
catastrophic when a fast driver like the s3tests CI workflow or the
admin worker scheduler invokes Run at multi-second cadence — each tick
ran a full subtree scan per shard, crushing the filer.
Decouple walker cadence from Run() invocation cadence: persist
LastWalkedNs in the per-shard cursor and fire the steady-state /
empty-replay walker only when (runNow - LastWalkedNs) >= cfg.WalkerInterval.
Cold-start and recovery walker fires (RecoveryView) stay unconditional
since those are bounded events that must run when their trigger
condition (no cursor, hash mismatch) is met. Recovery walker fires also
update LastWalkedNs so the subsequent steady-state pass doesn't
double-walk.
cfg.WalkerInterval=0 keeps the prior "fire every pass" behavior — the
in-repo integration tests and s3tests fast driver continue to work
unchanged. Production deployments should set this to the walk cost
budget (typically 1h-24h depending on cluster size).
Cursor file is back-compat: last_walked_ns is omitempty, so cursor
files written before this change decode as LastWalkedNs=0, which
walkerDue treats as "never walked steady-state" → walker fires next
pass to establish the anchor (same path a cold-start cursor takes).
No version bump.
Operator surface for WalkerInterval is the dailyrun.Config struct;
plumbing through worker.tasks.s3_lifecycle.Config and the admin
schema is a follow-up.
* fix(s3/lifecycle): suppress walker double-fire within a single pass
Two gemini-code-assist findings:
1. walkerDue with interval=0 returned true even when lastWalkedNs ==
runNow.UnixNano() — the cold-start / recovery branch already fired
the walker this pass, and the steady-state fall-through fired it
again. RecoveryView is a superset of every per-shard partition, so
the second walk added zero coverage and burned a full subtree scan.
Add a within-pass guard at the front of walkerDue: if the cursor's
LastWalkedNs equals runNow's UnixNano, the walker already ran this
pass — skip.
2. The empty-replay branch passed persisted.LastWalkedNs to walkerDue
instead of the local lastWalkedNs variable the rest of runShard
threads through. Trivially equal at this point in the function, but
the inconsistency would mask a future bug if any code above the
branch ever sets lastWalkedNs.
Test updates: TestWalkerDue gains the within-pass guard case plus a
companion "earlier same pass still fires" sanity check.
TestRunShard_ColdStartDoesNotDoubleWalk is new and pins the integration:
cold-start runShard with WalkerInterval=0 must call cfg.Walker exactly
once, not twice.
* fix(s3/lifecycle): reject negative WalkerInterval + lift within-pass guard
Two coderabbit findings:
1. validate() now rejects negative cfg.WalkerInterval. A typo like
-1h previously fell through walkerDue's `interval <= 0` branch and
silently re-enabled "walk every pass" — the exact behavior the
throttle was added to prevent. The admin-config parser already
clamps negative input to zero, but callers using dailyrun.Config
directly (tests, embedders) now get a loud error instead.
2. Within-pass double-fire suppression moves out of walkerDue and
into runShard's walkedThisPass local flag. walkerDue's equality
check (lastWalkedNs == runNow.UnixNano) was correct in production
(each pass freezes runNow at time.Now().UTC, no collisions) but
fragile in tests that inject the same runNow across distinct
passes — the test would see false suppression. Separating the
concerns also makes walkerDue answer one question (persisted-state
throttle) and runShard another (within-pass call-site dedup).
walker_interval_test.go: TestValidate_RejectsNegativeWalkerInterval
pins the new validation. TestWalkerDue's within-pass cases move out
(the function is pure throttle now); TestRunShard_ColdStartDoesNot
DoubleWalk still pins the integration behavior end-to-end.
* feat(s3/lifecycle): plumb WalkerInterval through worker admin config
#9484 added cfg.WalkerInterval to dailyrun.Config but left the worker
side wired to zero — operators couldn't actually use the throttle
without recompiling. Add the admin-schema knob:
- New constant WalkerIntervalMinutesAdminKey = "walker_interval_minutes"
follows the MetaLogRetentionDaysAdminKey pattern (Int64, minutes
unit, 0 = unbounded / fire every pass).
- New Config.WalkerInterval populated in ParseConfig from
adminValues; negative / zero stay at zero so the prior "fire every
pass" semantics keep the in-repo integration tests and the s3tests
sub-minute driver working unchanged.
- handler.go: admin form field with operator-facing label and
description, default in DefaultValues, value forwarded to
dailyrun.Run via cfg.WalkerInterval.
Tests cover the default-zero, positive, and negative cases — same
shape as the MetaLogRetention tests so the parsing contract stays
consistent.
Stacked on #9484; rebase after that lands.
* feat(s3/lifecycle): throttle steady-state walker by cfg.WalkerInterval
The steady-state and empty-replay walker fired on every dailyrun.Run
invocation, which is fine when Run is called at the bucket-walk cadence
the operator intends (e.g., once per hour or once per day), but
catastrophic when a fast driver like the s3tests CI workflow or the
admin worker scheduler invokes Run at multi-second cadence — each tick
ran a full subtree scan per shard, crushing the filer.
Decouple walker cadence from Run() invocation cadence: persist
LastWalkedNs in the per-shard cursor and fire the steady-state /
empty-replay walker only when (runNow - LastWalkedNs) >= cfg.WalkerInterval.
Cold-start and recovery walker fires (RecoveryView) stay unconditional
since those are bounded events that must run when their trigger
condition (no cursor, hash mismatch) is met. Recovery walker fires also
update LastWalkedNs so the subsequent steady-state pass doesn't
double-walk.
cfg.WalkerInterval=0 keeps the prior "fire every pass" behavior — the
in-repo integration tests and s3tests fast driver continue to work
unchanged. Production deployments should set this to the walk cost
budget (typically 1h-24h depending on cluster size).
Cursor file is back-compat: last_walked_ns is omitempty, so cursor
files written before this change decode as LastWalkedNs=0, which
walkerDue treats as "never walked steady-state" → walker fires next
pass to establish the anchor (same path a cold-start cursor takes).
No version bump.
Operator surface for WalkerInterval is the dailyrun.Config struct;
plumbing through worker.tasks.s3_lifecycle.Config and the admin
schema is a follow-up.
* fix(s3/lifecycle): suppress walker double-fire within a single pass
Two gemini-code-assist findings:
1. walkerDue with interval=0 returned true even when lastWalkedNs ==
runNow.UnixNano() — the cold-start / recovery branch already fired
the walker this pass, and the steady-state fall-through fired it
again. RecoveryView is a superset of every per-shard partition, so
the second walk added zero coverage and burned a full subtree scan.
Add a within-pass guard at the front of walkerDue: if the cursor's
LastWalkedNs equals runNow's UnixNano, the walker already ran this
pass — skip.
2. The empty-replay branch passed persisted.LastWalkedNs to walkerDue
instead of the local lastWalkedNs variable the rest of runShard
threads through. Trivially equal at this point in the function, but
the inconsistency would mask a future bug if any code above the
branch ever sets lastWalkedNs.
Test updates: TestWalkerDue gains the within-pass guard case plus a
companion "earlier same pass still fires" sanity check.
TestRunShard_ColdStartDoesNotDoubleWalk is new and pins the integration:
cold-start runShard with WalkerInterval=0 must call cfg.Walker exactly
once, not twice.
* fix(s3/lifecycle): reject negative WalkerInterval + lift within-pass guard
Two coderabbit findings:
1. validate() now rejects negative cfg.WalkerInterval. A typo like
-1h previously fell through walkerDue's `interval <= 0` branch and
silently re-enabled "walk every pass" — the exact behavior the
throttle was added to prevent. The admin-config parser already
clamps negative input to zero, but callers using dailyrun.Config
directly (tests, embedders) now get a loud error instead.
2. Within-pass double-fire suppression moves out of walkerDue and
into runShard's walkedThisPass local flag. walkerDue's equality
check (lastWalkedNs == runNow.UnixNano) was correct in production
(each pass freezes runNow at time.Now().UTC, no collisions) but
fragile in tests that inject the same runNow across distinct
passes — the test would see false suppression. Separating the
concerns also makes walkerDue answer one question (persisted-state
throttle) and runShard another (within-pass call-site dedup).
walker_interval_test.go: TestValidate_RejectsNegativeWalkerInterval
pins the new validation. TestWalkerDue's within-pass cases move out
(the function is pure throttle now); TestRunShard_ColdStartDoesNot
DoubleWalk still pins the integration behavior end-to-end.
* fix(master): include GrpcPort in LookupEcVolume response
LookupVolume already passes loc.GrpcPort through to the client; LookupEcVolume
builds Location with only Url / PublicUrl / DataCenter, so callers fall back to
ServerToGrpcAddress (httpPort + 10000). On any deployment where that
convention does not hold — multi-disk integration tests, custom port layouts
— EC reads dial the wrong port and quietly degrade to parity recovery.
* fix(volume/ec): probe every DiskLocation when serving local shard reads
reconcileEcShardsAcrossDisks (issue 9212) registers each .ec?? against the
DiskLocation that physically owns it, so a multi-disk volume server can hold
shards for the same vid in two separate ecVolumes — one per disk — with .ecx
on whichever disk owned the original .dat. The read path only consulted the
single EcVolume FindEcVolume picked, so requests for shards on the sibling
disk fell through to errShardNotLocal and then to remote/loopback recovery.
Walk all DiskLocations after the first probe in both readLocalEcShardInterval
and the VolumeEcShardRead gRPC handler; the latter also covers the loopback
that recoverOneRemoteEcShardInterval falls back to when a peer dial fails.
* test(volume/ec): cover the multi-disk EC lifecycle end-to-end
Two integration tests against a real volume server with two data dirs:
TestEcLifecycleAcrossMultipleDisks drives encode -> mount -> HTTP read ->
drop .dat -> stop -> redistribute shards across disks -> restart -> verify
reconcileEcShardsAcrossDisks attached the orphan shards and reads still
work -> blob delete -> stop -> drop a shard -> restart -> VolumeEcShardsRebuild
pulls input from both disks -> reads still work.
TestEcPartialShardsOnSiblingDiskCleanedUpOnRestart is the issue 9478
reproducer at the cluster level: seed a healthy .dat on disk 0, plant the
on-disk footprint of an interrupted EC encode on disk 1, restart, and assert
pruneIncompleteEcWithSiblingDat wipes disk 1 without touching disk 0.
Framework gets RestartVolumeServer / StopVolumeServer helpers; the previous
run's volume.log is rotated to volume.log.previous so a startup regression on
the second run does not lose the first run's diagnostics.
* review: trim verbose comments
* review: drop racy fast-path, use locked findEcShard directly
gemini-code-assist flagged the two-step lookup in readLocalEcShardInterval
and VolumeEcShardRead: the first probe (ecVolume.FindEcVolumeShard) reads
the EcVolume's Shards slice without holding ecVolumesLock, so a concurrent
mount / unmount could race with it. findEcShard already walks every
DiskLocation under the right lock, so the fast-path adds nothing but the
race. Collapse both call sites to a single locked call.
Also note in RestartVolumeServer why the log-rotation error is swallowed:
absence on first call is benign; anything else surfaces in the next
os.Create in startVolume.
* feat(s3/versioning): grep-able heal logs + scan-anomaly diagnostics + audit cmd
Three diagnostic additions on top of #9460, all aimed at making the next
production incident faster to triage than the one we just spent hours on.
1. [versioning-heal] grep prefix on every heal-related log line, with a
small fixed event vocabulary (produced / surfaced / healed / enqueue /
drain / retry / gave_up / anomaly / clear_failed / heal_persist_failed
/ teardown_failed / queue_full). One grep gives operators a single
event stream across the produce-to-drain lifecycle.
2. Escalate the "scanned N>0 entries but no valid latest" case in
updateLatestVersionAfterDeletion from V(1) Infof to a Warning that
names the orphan entries it saw. This is the listing-after-rm
inconsistency signature that pinned down 259064a8's failure — it
should not be invisible at default log levels.
3. New weed shell command `s3.versions.audit -prefix <path> [-v] [-heal]`
that walks .versions/ directories under a prefix and reports the
stranded population. With -heal it clears the latest-version pointer
in place on stranded directories so subsequent reads return a clean
NoSuchKey instead of replaying the 10-retry self-heal loop.
* fix(s3/versioning): audit pagination, exclusive categories, ctx-aware retry
Address PR review:
1. s3.versions.audit walked only the first 1024-entry page of each
.versions/ directory, false-positiving "stranded" on large dirs.
Loop until the page returns < 1024 entries, advancing startName.
2. clean and orphan-only categories double-counted when a directory
had no pointer and at least one orphan: incremented both. Make them
mutually exclusive so report totals sum to versionsDirs.
3. retryFilerOp's worst-case ~6.3s backoff was a bare time.Sleep,
non-interruptible by ctx. A server shutdown / client disconnect
would wait out the budget per in-flight delete. Thread ctx through
deleteSpecificObjectVersion -> repointLatestBeforeDeletion /
updateLatestVersionAfterDeletion -> retryFilerOp; backoff now uses
a select{<-ctx.Done(), <-timer.C}. HTTP handlers pass r.Context();
gRPC lifecycle handlers pass the stream ctx.
New test pins the behavior: cancelling ctx mid-backoff returns
ctx.Err() in <500ms instead of blocking ~6.3s.
* fix(s3/versioning): clearStale outcome + escape grep-able log fields
Two coderabbit follow-ups:
1. Successful pointer clear should suppress `produced`.
updateLatestVersionAfterDeletion's transient-rm fallback called
clearStaleLatestVersionPointer best-effort, then unconditionally
returned retryErr. The caller (deleteSpecificObjectVersion) saw the
error and emitted `event=produced` + enqueued the reconciler, even
though clearStaleLatestVersionPointer had just driven the pointer to
consistency and the next reader would get NoSuchKey via the
clean-miss path. Make clearStaleLatestVersionPointer return cleared
bool; on success the caller returns nil so neither produced nor the
reconciler enqueue fires. Concurrent-writer aborts, re-scan errors,
and CAS mismatches still report false so genuinely stranded state
keeps surfacing.
2. Escape user-controlled fields in heal log lines.
versioningHealInfof / Warningf / Errorf interpolated raw bucket /
key / filename / err text into a single-space-separated line. An S3
key (or error string from gRPC) containing whitespace, newlines, or
`event=...` could split one event into multiple tokens and spoof
fake fields downstream. Sanitize each arg in the helper: safe
values pass through; anything with whitespace, quotes, control
chars, or backslashes is replaced with its strconv.Quote form. No
caller changes — the format strings remain unchanged.
Tests pin both behaviors: sanitization table covers the field
boundary cases; an end-to-end shape test confirms a key containing
`event=spoof` stays inside a single quoted token.
* fix(volume): seed indexFileOffset in SortedFileNeedleMap so Delete appends
NewSortedFileNeedleMap never initialised the inherited
baseNeedleMapper.indexFileOffset, so it stayed at zero. The compact and
leveldb constructors both seed it from stat().Size(); this one did not.
When a read-only or noWriteCanDelete volume processed a Delete, the
inherited appendToIndexFile wrote the tombstone via WriteAt at
indexFileOffset=0 and advanced 16 bytes at a time. Every delete since
the SortedFileNeedleMap path was first exercised for writes (#5633,
which switched .sdx to O_RDWR) overwrote the front of .idx with
tombstones for unrelated keys.
Net effect on disk: the first N entries of .idx become sequentially
written tombstones with .dat offsets at the tail, while the original
Put records that lived in slots [0..N) are gone. fsck sees ~N phantom
orphans whose keys' runtime needle-map entries are already tombstoned
in .sdx, so the volume server replies 304 to every purge and the
orphan count is stable across retries.
Stat the .idx at open and seed indexFileOffset = size. The .idx now
grows on delete instead of being clobbered. Add a regression test that
populates .idx via the compact map, opens it as a SortedFileNeedleMap,
deletes one needle, and verifies the file grew by one entry, the
original Put records survived, and the tombstone landed at the tail.
The fix only stops further corruption. .idx files already damaged by
this bug have to be rebuilt from .dat before the next restart, or
isSortedFileFresh will regenerate .sdx from the bad .idx and propagate
the damage.
Refs #9479
* test: harden SortedFileNeedleMap regression assertions
Address PR review (gemini-code-assist, coderabbit):
- Close the writer before t.Fatalf in the Put loop so a failing seed
doesn't leak the .idx file descriptor.
- Verify offset and size of preserved Put records, not just the key.
Front-overwrite damage would clobber all three fields, but a key-only
check would miss a different regression that corrupted offset/size
while leaving the key intact.
* fix(s3/versioning): repair dangling latest-version pointer after partial delete
deleteSpecificObjectVersion did two non-atomic filer ops: rm the version
blob, then update the .versions/ pointer. Step 2 failures were silently
logged and the client got 204 OK, so any transient blip (filer timeout,
process restart between RPCs, lock contention) left the .versions/
directory naming a missing file. Subsequent GETs paid the 10-retry
self-heal cost and returned NoSuchKey — surfacing as "Storage not found"
to Veeam, which is what triggered this investigation.
Three changes:
1. Pre-roll the pointer for the singleton / multi-version-deleting-latest
cases. The pointer is repointed (multi) or cleared (singleton) before
the blob rm. A failure between leaves a recoverable orphan blob —
pointer is consistent, GETs succeed or correctly miss without
entering the stale-pointer self-heal path.
2. Wrap the load-bearing filer ops in updateLatestVersionAfterDeletion
with bounded retries (~6.3s worst case). When retries are exhausted
the function now returns a non-nil error instead of swallowing it.
The caller logs at Error level and queues the path for the
reconciler.
3. Background reconciler drains stranded .versions/ pointer-to-missing
states off the hot path. Bounded in-memory queue with capped retries;
read-path heal remains as a last-resort safety net.
* fix(s3/versioning): address review on #9460
Four fixes addressing review on PR #9460. All four are correctness;
no behavioural change for the happy path.
1. repointLatestBeforeDeletion: discriminate NotFound from transient
errors when re-fetching the .versions/ entry. Previously any error
returned rolled=true,nil — a transient filer hiccup at that point
would cause the caller to skip the post-delete reconciliation AND
proceed with the blob rm, producing exactly the dangling pointer
state the PR aims to prevent. NotFound stays "vacuously consistent"
(directory already gone); other errors surface so the caller aborts
before removing the blob.
2. Move the singleton .versions/ teardown out of
repointLatestBeforeDeletion (where it ran BEFORE the blob rm and
always failed with "non-empty folder") into deleteSpecificObjectVersion
AFTER the blob rm. Adds a wasSingleton return value so the caller
knows when to run the teardown. Without this, every singleton-version
delete in a versioned bucket leaked an empty .versions/ directory.
3. Wrap the list, getEntry, and mkFile calls inside
repointLatestBeforeDeletion with retryFilerOp so the pre-roll has
the same transient-failure resilience as the post-roll path. Without
retries, a single transient blip causes the caller to fall back to
the legacy non-atomic flow even when the filer recovers immediately.
4. healVersionsPointer in the reconciler: same NotFound-vs-transient
discrimination on both the .versions/ getEntry and the latest-file
presence probe. Previously a transient filer error would silently
evict the candidate from the queue as "healed", leaving the real
stranded state until a client read happened to surface it.
Also fixes the gemini-flagged consistency nit: the queued-for-reconciler
error log now uses normalizedObject instead of object so it matches the
queue entry's key.
* fix(s3/versioning): short-circuit terminal errors in retryFilerOp
Add isRetryableFilerErr that returns false for filer_pb.ErrNotFound,
gRPC NotFound, context.Canceled, and context.DeadlineExceeded.
retryFilerOp now bails immediately on a terminal error and returns it
unwrapped, so callers like repointLatestBeforeDeletion.getEntry and
updateLatestVersionAfterDeletion.rm see the raw NotFound instead of
paying the ~6.3 s retry-budget delay AND parsing it out of an
"exhausted N retries" wrapper.
errors.Is and status.Code already walk the %w chain so today's call
sites still work, but the delay was real on the hot DELETE path
whenever a key was genuinely absent. Test added covering all five
terminal-error shapes — each must run the wrapped fn exactly once and
return in under 50 ms.
* fix(storage): prune partial EC shards when sibling disk has healthy .dat (#9478)
handleFoundEcxFile only checks for .dat in the same disk location as the
EC shards. In a multi-disk volume server an interrupted encode can leave
.ec?? + .ecx on disk B while the source .dat still lives on disk A: the
per-disk loader sees no .dat next to .ecx, mistakes the leftover for a
distributed-EC layout, and mounts the partial shards. The volume server
then heartbeats both a regular replica and an EC shard for the same vid
and the master keeps both.
Sweep the store after per-disk loading and before the cross-disk
reconcile to delete partial EC files when a healthy .dat for the same
(collection, vid) exists on a sibling disk. Push DeletedEcShardsChan for
every pruned shard so master forgets the new-shard message the per-disk
pass already emitted, instead of waiting for the next periodic heartbeat.
* fix(seaweed-volume): mirror prune of partial EC with sibling .dat (#9478)
Rust port of the same Store-level prune added to weed/storage. The
per-disk EC loader in disk_location.rs only checks for .dat in the same
disk as the EC shards, so an interrupted encode that leaves .ec?? + .ecx
on disk B while the source .dat sits on disk A is mounted as if it were
a distributed-EC layout. The volume server then heartbeats both a
regular replica and an EC shard for the same vid.
Sweep the store after per-disk loading and before the cross-disk
reconcile, dropping in-memory EcVolumes with fewer than DATA_SHARDS_COUNT
shards when a .dat for the same (collection, vid) exists on a sibling
disk, and remove all on-disk EC artefacts for them. The Rust heartbeat
path already diff-emits deletes from the next ec_volumes snapshot, so no
explicit delete-channel push is needed here.
Tests cover both the issue 9478 layout and a distributed-EC layout with
no .dat anywhere on the store, which must be left alone.
* fix(storage): validate sibling .dat size before deleting partial EC (#9478)
The earlier prune deleted partial EC files whenever any .dat for the
same vid existed on a sibling disk — including a zero-byte shell. A
shell is no more useful than the partial shard it would replace, and
the partial shard might still combine with shards on other servers
in a recoverable distributed-EC layout. Wiping it based on a corrupt
sibling .dat is data loss masquerading as cleanup.
Tighten the check: when the EC's .vif recorded a non-zero source size
in datFileSize, require the sibling .dat to be at least that many
bytes; otherwise fall back to "at least a superblock". The .vif value
is what the encoder wrote at the moment the source was sealed, so a
sibling .dat smaller than that is provably truncated. Carry the size
through indexDatOwners alongside the location.
The Rust port had the same gap and an additional bug behind it:
EcVolume::new wasn't reading datFileSize from .vif, so the safety
check always fell back to the superblock floor. Wire datFileSize
through. The existing shard-size calculation in
LocateEcShardNeedleInterval already uses dat_file_size when non-zero,
so populating it also matches Go's behaviour there.
Tests cover the truncated-sibling case in both ports.
* fix(s3/audit): emit audit log for successful GET/HEAD
Successful GET/HEAD object requests never produced a fluent audit entry
because those handlers write the response directly (streaming for GET,
WriteHeader for HEAD) and never reach a PostLog call site. The wiki
advertises GET as an audited verb, so the asymmetry surprises operators
who rely on the log for read-access auditing.
Move the safety net into the track() middleware: tag each request with
an audit-tracking flag, let PostLog/PostAccessLog (delete path) mark it,
and emit a single fallback entry after the handler returns when nothing
fired. The recorder's status flows into the fallback so the audit row
still reflects 200/206 vs 404 etc. No double logging for handlers that
already emit (write helpers, error paths, bulk delete).
Refs #9463
* fix(s3/audit): defensive nil checks on audit-tracking helpers
Address PR review: guard against nil request and nil *atomic.Bool stored
under the audit-tracking key. The conditions are unreachable today (the
key is private and we only ever store new(atomic.Bool)), but the checks
are free and keep the helpers safe if a future caller misbehaves.
* test(s3/audit): track() audit fallback coverage + stale comment cleanup (#9469)
test(s3/audit): cover track() fallback wiring + cleanup
Adds two unit tests in weed/s3api/stats_test.go that exercise the
audit-tracking flag set up by track(): one verifies the fallback path
fires when a handler writes the response directly (the GET/HEAD object
regression in #9463), the other verifies the flag is set when a handler
emits PostLog itself so the fallback is skipped.
To make the wiring observable without standing up fluent, PostLog now
marks the audit flag before short-circuiting on a nil Logger; production
behavior is unchanged (no logger, no posting) but the flag stays
consistent.
Also drops two stale comments in s3api_object_handlers.go that still
referenced proxyToFiler — that helper was removed when GET/HEAD started
streaming from volume servers directly.
Stacks on #9467.
Phase 4b shipped the walker without plugging it into the cluster
rate.Limiter that processMatches honors. A walker hitting a large
bucket on the recovery branch could burst LifecycleDelete RPCs past
the cluster_deletes_per_second cap that streaming-replay respects.
WalkerDispatcher now takes a *rate.Limiter and waits on it before
each RPC, observing the wait time on S3LifecycleDispatchLimiterWaitSeconds
just like processMatches does. The handler passes the same limiter
to both paths so replay + walk share one budget; nil disables
throttling (unchanged default).
Tests pin: the limiter actually delays a dispatch when the burst
token is drained, and a ctx cancellation in Limiter.Wait surfaces
as an error without sending the RPC.
* refactor(s3/lifecycle): one meta-log subscription per dailyrun.Run pass
Per-shard Reader subscriptions multiplied filer load by len(cfg.Shards)
even though the same gRPC stream could serve every shard in a worker
process. Replace with one SubscribeMetadata stream covering all shards
in cfg.Shards: the Reader's ShardPredicate accepts the shard set, and
a fan-out goroutine routes events to per-shard channels by ev.ShardID.
drainShardEvents now reads from a passed-in channel; shards whose
persisted cursor is fresher than the global floor (runNow - maxTTL)
filter ev.TsNs <= startTsNs locally. The fan-out cancels the reader
when the first ev.TsNs > runNow arrives — meta-log order means the
rest of the stream is past the pass boundary too.
cfg.Workers no longer gates shard concurrency: with the shared
subscription, every shard goroutine must be live to drain its channel,
or the fan-out stalls. The field is retained for back-compat and
ignored. Dispatch throttling still goes through cfg.Limiter.
Filer load: 16x -> 1x SubscribeMetadata streams per pass.
* fix(s3/lifecycle): shared subscription floor is min(per-shard cursor)
The shared subscription used runNow - maxTTL as its starting TsNs, but
that's the cold-start floor. For shards whose persisted cursor sits
below the floor — exactly the case a rule with TTL == maxTTL produces,
where a pending event's PUT TsNs ends up at runNow - maxTTL — events
that the per-shard drain still needs are filtered out before the
Reader even forwards them.
Same regression I fixed in 6796ab6db for the per-shard subscription;
now applied at the shared level. computeGlobalStartTsNs loads every
shard's cursor and picks the minimum, falling back to the cold-start
floor only for shards with no persisted cursor.
* fix(s3/lifecycle): WalkerDispatcher uses entry.Path for ABORT_MPU + shell announces load
Two CI-surfaced bugs caught by PR #9471's S3 Lifecycle Tests run on
master after PRs #9475 + #9466:
1. Walker dispatch for ABORT_MPU was sending entry.DestKey as
req.ObjectPath. The server's ABORT_MPU handler
(weed/s3api/s3api_internal_lifecycle.go) strips the .uploads/
prefix to extract the upload id and reads the init record from
that directory, so it expects the .uploads/<id> path verbatim.
DestKey looks like a regular object path; the server's prefix
check fails and the dispatch returns BLOCKED with
"FATAL_EVENT_ERROR: ABORT_MPU object_path missing .uploads/
prefix". The test fix renames TestWalkerDispatcher_MPUInitUsesDestKey
to ...UsesUploadsPath and inverts the assertion to match the
actual server contract.
DestKey is still used for the WalkBuckets shard predicate and
for rule-prefix matching in bootstrap.walker; both surfaces want
the user's intended path, while DISPATCH wants the .uploads/<id>
directory. The bootstrap test
(TestLifecycleAbortIncompleteMultipartUpload) caught this when
the walker's BLOCKED error surfaced as FATAL output.
2. test/s3/lifecycle/s3_lifecycle_empty_bucket_test.go asserts the
shell command logs "loaded lifecycle for N bucket(s)" so a
regression that produces half-shaped output (no load summary)
is caught. The restored shell command (PR #9475) didn't print
that line; add it back on the first pass that finds non-zero
inputs.
* fix(s3/lifecycle): walker fires for walker-only buckets (empty replay path)
runShard's empty-replay sentinel (rsh == [32]byte{}) was returning
BEFORE the steady-state walker check. A bucket whose only lifecycle
rule was walker-only (ExpirationDate / ExpiredDeleteMarker /
NewerNoncurrent) would never have it dispatched because:
- ReplayContentHash only hashes replay-eligible kinds, so
walker-only-only snapshots produce rsh == empty.
- The early-return persisted the empty cursor and exited before
the steady-state walker block at the bottom of the function.
Move the walker invocation INTO the empty-replay branch so walker-
only rules dispatch on the same path as mixed-rule buckets.
TestLifecycleExpirationDateInThePast and
TestLifecycleExpiredDeleteMarkerCleanup were both timing out their
"object must be deleted" Eventually polls because of this. Caught
on PR #9471's S3 Lifecycle Tests run after PR #9475 restored the
shell entry point that exercises the integration tests.
* fix(s3/lifecycle): cold-start walker covers pre-existing objects
runShard only walked the bucket tree on the recovery branch (found
&& hash mismatch). For a fresh worker with no persisted cursor,
found=false, so the recovery walker never fired and the meta-log
replay only scanned runNow - maxTTL of events. Objects PUT before
that window — including pre-existing objects in a newly-rule-enabled
bucket — never matched the rule.
The streaming worker handled this with scheduler.BucketBootstrapper.
Daily-replay needed the equivalent: walk the live tree once on the
first run for each shard so pre-existing objects get evaluated even
when their PUT events are outside meta-log scan window.
Restructured the recovery branch to fire the walker on either
(found && mismatch) OR !found. On cold-start the cursor isn't
rewound — we keep TsNs=0 and let the drain below floor to
runNow - maxTTL like before; the walker just handles whatever the
sliding window can't reach.
TestLifecycleBootstrapWalkOnExistingObjects was the exact CI failure
this addresses (https://github.com/seaweedfs/seaweedfs/actions/runs/25777823522/job/75714014151).
* fix(s3/lifecycle): restore walker tag and null-version state
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* fix(s3/lifecycle): parallelize shell shard sweeps
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* fix(s3/lifecycle): bound each runPass ctx + refresh in runLifecycleShard
Two CI bugs surfaced after PR #9466 deleted the streaming worker:
1. The shell command's -refresh loop never fires. runPass used the
outer ctx (full -runtime), so dailyrun.Run blocked for the entire
1800s s3tests window — the background worker only ran one pass
and never re-loaded configs that tests created mid-run.
test_lifecycle_expiration sees 6 objects when expecting 4 because
expire1/* never reaches the worker's snapshot. Cap each pass to
cadence+5s when cadence>0; one-shot (cadence=0) keeps the full ctx.
2. TestLifecycleExpiredDeleteMarkerCleanup's docstring says
"pass 1 cleans v1; pass 2 removes the now-orphaned marker," but
runLifecycleShard invoked with no -refresh — only one pass ran.
The marker rule can't fire in the same pass that dispatches v1's
delete because v1 is still in .versions/. Add -refresh 1s so the
10s runtime gets multiple passes.
* fix(s3/lifecycle): persist cursor with fresh ctx after passCtx timeout
drainShardEvents only exits via ctx cancellation for an idle subscription
— that's the steady-state when all replayed events are already past.
Saving the cursor with the canceled passCtx silently drops every
advance, so the next pass re-subscribes from the same floor and
re-replays the same events. Symptom in s3tests: status=error shards=16
errors=16 on every pass, and 1/6 expire3/* dispatches lost to a race
between concurrent shard drains all retrying the same events.
Use a 5s timeout derived from context.Background for the save, and
treat passCtx Deadline/Canceled from drain as a clean end-of-pass —
not a shard-level error to log.
* fix(s3/lifecycle): trust persisted cursor; never bump past pending events
The drain freezes cursorAdvanceTo at the last pre-skip event so pending
matches (DueTime > runNow) re-enter the subscription next pass. Combined
with the new cursor persistence, the floor bump (runNow - maxTTL) then
orphans the very events the drain stopped at.
Concrete: a rule with TTL == maxTTL fires at runNow == PUT_TIME +
maxTTL, so floor (= runNow - maxTTL) lands exactly on PUT_TIME. If the
last advance saved a cursor right before the not-yet-due PUT (e.g.,
keep2/* between expire1/* and expire3/* on the same shard), the floor
bump on pass 9 skips past the expire3 event itself — the worker never
re-reads it. Test symptom: expire3/* never expires when worker shards
include other earlier no-match events.
Cold start (found=false) still subscribes from runNow - maxTTL. Steady
state honors the cursor verbatim.
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
The s3tests workflow (.github/workflows/s3tests.yml) backgrounds
`weed shell -c 's3.lifecycle.run-shard -shards 0-15 -s3 ... -refresh 2s'`
and then runs `kill -0 $pid` to confirm the worker stayed alive.
The PR-9475 restore ran dailyrun.Run once and exited cleanly — even
faster when no buckets had lifecycle rules yet ("nothing to run").
The aliveness check then failed and the s3tests job died with
"lifecycle worker died on startup". Caught on
https://github.com/seaweedfs/seaweedfs/actions/runs/25772523143/job/75698413401.
Fix:
- -refresh now drives an inter-pass loop. cadence=0 (default) is
one-shot, matching the test/s3/lifecycle/ integration-test
invocation that omits -refresh and expects synchronous return.
cadence>0 (the CI case) keeps the command alive until -runtime
expires, running a fresh dailyrun.Run on every tick.
- Each iteration re-loads bucket configs via
scheduler.LoadCompileInputs so rules created mid-run (the s3tests
flow creates rules AFTER the worker starts) get picked up.
- The "no rules; nothing to run" early return is gone — the
command stays alive even with an empty initial snapshot, waiting
for tests to add rules.
- -dispatch, -checkpoint, -bootstrap-interval stay accepted-but-
ignored (legacy streaming flags).
fix(shell): restore s3.lifecycle.run-shard as a dailyrun.Run wrapper
PR #9466 deleted weed/shell/command_s3_lifecycle_run_shard.go on the
premise that it was a debug-only tool. It wasn't: the s3tests CI
workflow (.github/workflows/s3tests.yml) and the test/s3/lifecycle/
integration tests invoke it via `weed shell` to drive lifecycle
expirations on demand. Both started failing with
"unknown command: s3.lifecycle.run-shard".
This PR restores the command with the same flag set so existing
callers (CI scripts and integration tests) work unchanged. The
implementation no longer drives the streaming dispatcher.Pipeline +
scheduler.BucketBootstrapper (deleted) — instead it does one bounded
dailyrun.Run pass through the same daily-replay code path the
production worker exercises. The walker fires for walker-bound
rules just like in the worker.
Obsolete streaming flags (-dispatch / -checkpoint / -refresh /
-bootstrap-interval) are accepted-but-ignored so existing scripts
don't need to drop them.
* feat(s3/lifecycle): operator-declared meta-log retention activates PromotedHash
dailyrun.Config.RetentionWindow has been wired since Phase 4b but the
handler never supplied a value, so runShard always fell back to
maxTTL and engine.PromotedHash hashed nothing. The partition-flip
recovery trigger was dormant by design "until the handler plumbs the
real meta-log retention here."
This PR plumbs it via a new admin form field:
Meta-Log Retention (days) — 0 = unbounded (current behavior).
When set, ParseConfig converts days to a time.Duration on
cfg.MetaLogRetention. The handler passes it as
dailyrun.Config.RetentionWindow, which runShard then feeds to
engine.PromotedHash. Rules whose TTL exceeds the declared window
land in the walk partition; the next time an operator shrinks
retention so a previously replay-eligible rule slips past it,
PromotedHash mismatches → recovery branch fires → walker re-evaluates
the rule across the whole filer tree.
0 stays the default, so existing deployments see no behavior change.
* chore(s3/lifecycle): rephrase days->duration conversion
gemini-code-assist flagged the original form as a compile error,
which it wasn't (time.Duration is a named int64 and supports * with
other time.Durations — the test suite verified the value was
correct). The suggested form is more idiomatic regardless:
days*24 happens in int64 space before the lift to time.Duration,
so the unit is unambiguous.
Revert "master: bind heartbeat claims to the connecting peer (#9443)"
This reverts commit f28c7ce6df.
The strict heartbeat-ip-vs-peer match in authorizeHeartbeatPeer rejects
every hostname-based deployment. In docker-compose / k8s the volume
server is started with -ip=<service-name> and the gRPC peer surfaces
as the container/pod IP, so the two never match and every heartbeat
fails with `heartbeat ip "volume" does not match peer "172.18.0.3"`.
The master therefore never learns about any volume, growth fails, and
fio writes against the mount return EIO.
After the #9440 revert merged (43a8c4fdc), the e2e workflow is still
failing for this reason; see
https://github.com/seaweedfs/seaweedfs/actions/runs/25767265775 .
Reverting to unblock e2e. A narrower re-do should accept the heartbeat
when heartbeat.Ip resolves (DNS) to the peer address, so the spoof
hardening can return without breaking hostname-based clusters.
* Revert "volume: fail closed in admin gRPC gate when no whitelist is configured (#9440)"
This reverts commit 21054b6c18.
The fail-closed gate broke any multi-host cluster: in compose / k8s /
remote-host deployments the master's IP isn't loopback, so every
master->volume admin RPC (AllocateVolume, BatchDelete, EC reroute,
vacuum, scrub, ...) is rejected with PermissionDenied unless the
operator manually configures -whiteList. The e2e workflow has been
failing since 10cc06333 with `not authorized: 172.18.0.2` on
AllocateVolume; downstream symptom is fio fsync EIO because zero
volumes can be grown.
The gate's intent was to lock down destructive admin tooling, but the
same RPCs are the master's normal mechanism for growing and managing
volumes. Reverting to restore cluster-internal operation; a narrower
re-do should distinguish operator/admin callers from the master peer
(e.g. trust IPs resolved from -master) before going back in.
* security: skip invalid CIDR in UpdateWhiteList so IsWhiteListed can't panic
The revert in the previous commit also rolled back an unrelated bug fix
that lived inside #9440: UpdateWhiteList logged on net.ParseCIDR error
but did not continue, so the nil *net.IPNet was stored in whiteListCIDR
and IsWhiteListed would panic dereferencing cidrnet.Contains(remote) on
the next gRPC admin check.
Restore the continue. Orthogonal to the fail-closed semantics this PR
is reverting.
SendHeartbeat used to accept whatever Ip/Port/Volumes the caller put on
the wire. Three changes tighten that:
- Reject heartbeats whose Ip does not match the gRPC peer's source
address. Loopback peers are still trusted; operators behind a proxy
can opt out with -master.allowUntrustedHeartbeat.
- Track which (ip, port) first claimed a volume id or an ec shard slot
and drop foreign re-claims. Non-EC volume claims are bounded by the
replica copy count so legitimate replicas still register. EC
ownership is keyed by (vid, shard_id) so the same vid can legitimately
be split across many peers as long as their EcIndexBits are disjoint;
rejected bits are cleared from the bitmap and the parallel ShardSizes
array is compacted in lock-step.
- Maintain reverse indexes owner -> volumes and owner -> ec shard slots
so disconnect cleanup is O(M) in what that peer held rather than O(N)
over the whole map.
Bindings are also released when a heartbeat reports that the peer no
longer holds an id, either via explicit Deleted{Volumes,EcShards}
entries or by omitting it from a full snapshot. Without this, a planned
rebalance that moved a vid or an ec shard from peer A to peer B would
leave B's heartbeats permanently filtered out until A disconnected,
breaking ec encode/decode flows that delete shards on the source as
soon as the move completes.
The (vid -> owners) binding still does not track which replica slot
each peer occupies, so the first N claims under the copy count win;
strict per-slot mapping is a follow-up.
Ping previously dialled whatever host:port the caller asked for. Gate
each server's Ping handler on cluster membership: masters check the
topology, registered cluster nodes, and configured master peers; volume
servers only accept their seed/current masters; filers accept tracked
peer filers, the master-learned volume server set, and configured
masters.
Use address-indexed peer lookups to keep Ping target validation O(1):
- topology maintains a pb.ServerAddress -> *DataNode index alongside
the dc/rack/node tree, kept in sync from doLinkChildNode and
UnlinkChildNode plus the ip/port-rewrite branch in
GetOrCreateDataNode. GetTopology now returns nil on a detached
subtree instead of panicking, so the linkage hooks can no-op safely.
- vid_map tracks a refcount per volume-server address so
hasVolumeServer answers without scanning every vid location. The
add path skips empty-address entries the same way the delete path
already does, so a zero-value Location cannot leak a permanent
serverRefCount[""] bucket.
- masters reuse a cached master-address set from MasterClient instead
of walking the configured peer slice on every request.
- volume servers compare against a pre-built seed-master set and
protect currentMaster reads/writes with an RWMutex, fixing the
data race with the heartbeat goroutine. The seed slice is copied
on construction so external mutation cannot desync it from the
frozen lookup set.
- cluster.check drops the direct volume-to-volume sweep; volume
servers no longer carry a peer-volume list, and the note next to
the dropped probe is reworded to make clear that direct
volume-to-volume reachability is intentionally not validated by
this command.
Update the volume-server integration tests that drove Ping through the
new admission gate: success-path coverage now targets the master peer
(the only type a volume server tracks), and the unknown/unreachable
path asserts the InvalidArgument the gate now returns instead of the
old downstream dial error.
Mirror the same admission gate in the Rust volume server crate: a
seed-master HashSet built once at startup plus a tokio RwLock over the
heartbeat-tracked current master, both consulted in is_known_ping_target
on every Ping, with InvalidArgument returned for any target that isn't
a recognised master.
* feat(s3/lifecycle): delete streaming algorithm path (Phase 5b)
Phase 5a (PR #9465) retired the algorithm flag and made daily_replay
the only execution path. The streaming-side code (scheduler.Scheduler,
scheduler.BucketBootstrapper, dispatcher.Pipeline, dispatcher.Dispatcher,
dispatcher.FilerPersister, and their tests) has had no in-tree caller
since then. This PR deletes it.
Net change: ~4800 lines removed, ~130 added (the scheduler/configload
tests' helper file the deleted bootstrap_test.go used to host).
Removed:
- weed/s3api/s3lifecycle/scheduler/{bootstrap,bootstrap_test,
scheduler,scheduler_test,pipeline_fanout_test,
refresh_default,refresh_s3tests}.go
- weed/s3api/s3lifecycle/dispatcher/{dispatcher,dispatcher_test,
dispatcher_helpers_test,edge_cases_test,multi_shard_test,
pipeline,pipeline_test,pipeline_helpers_test,toproto_test,
dispatch_ticks_default,dispatch_ticks_s3tests}.go
- weed/s3api/s3lifecycle/dispatcher/filer_persister_test.go
(FilerPersister deleted; FilerStore tests don't need their own
file)
- weed/shell/command_s3_lifecycle_run_shard{,_test}.go
(debug-only shell command that only ever wrapped the streaming
pipeline; the production worker now exercises the same path
every daily run)
Trimmed:
- dispatcher/filer_persister.go down to FilerStore +
NewFilerStoreClient — the small interface daily_replay's cursor
persister (dailyrun.FilerCursorPersister) plugs into.
Kept (still consumed by daily_replay):
- scheduler/configload.{go,_test.go} (LoadCompileInputs,
AllActivePriorStates)
- dispatcher/sibling_lister.{go,_test.go} (NewFilerSiblingLister,
FilerSiblingLister)
- dispatcher/filer_persister.go (FilerStore, NewFilerStoreClient)
scheduler/testhelpers_test.go restores fakeFilerClient, fakeListStream,
dirEntry, fileEntry — helpers the configload tests used to share with
the deleted bootstrap_test.go.
Updates the handler-package doc strings and one reader-package
comment that still named the streaming pipeline.
* fix(s3/lifecycle): hold lock through tree read in test filer client
gemini caught an inconsistency in scheduler/testhelpers_test.go:
LookupDirectoryEntry reads c.tree under c.mu, but ListEntries was
releasing the lock before reading c.tree. The map is effectively
static during tests so there's no actual race today, but matching
the convention keeps the helper safe if a future test mutates the
tree mid-run.
feat(s3/lifecycle): remove algorithm flag, daily_replay is the only path (Phase 5a)
With Phase 4b on master the daily_replay path covers every rule kind
and the streaming algorithm has no remaining responsibilities. This
PR retires the algorithm flag from the worker:
- Drop the "Algorithm" enum field from AdminConfigForm and its
DefaultValues entry.
- Drop the if/else routing in Execute — every Execute call now
routes straight into executeDailyReplay.
- Drop the streaming-only worker fields (DispatchTick,
CheckpointTick, RefreshInterval, BootstrapInterval) and their
matching form fields. None of them are read by the daily_replay
path; keeping them in the form would suggest tuning knobs that
don't do anything.
- Drop AlgorithmStreaming / AlgorithmDailyReplay constants and the
Config.Algorithm field.
The streaming-path packages (s3lifecycle/scheduler, s3lifecycle/dispatcher)
remain on the tree; they're now reachable only by the
weed shell s3.lifecycle.run-shard debug command and the few helpers
(LoadCompileInputs, FilerStore, FilerSiblingLister) the daily_replay
worker still uses. Phase 5b deletes the dead code.
Tests prune the cadence-default assertions to the single remaining
field (max_runtime_minutes).
Follow-up to PR #9459 (merged before this fix landed). The walker
dispatcher's RPC failure paths were labeled "TRANSPORT_ERROR" and
"NIL_RESPONSE"; streaming (dispatcher/dispatcher.go) and the replay
drain (processMatches in run.go via #9462) use "RPC_ERROR" for the
same condition. Aligning so a single Prometheus query covers all
three delete paths.
Folds nil-response under RPC_ERROR rather than a separate label —
operationally it's the same class of failure (server returned no
usable response).
* shell: expose retention flags on mq.topic.configure
The ConfigureTopicRequest proto already carries a TopicRetention message
({retention_seconds, enabled}), and GetTopicConfigurationResponse / the
admin UI both surface it — but the `mq.topic.configure` shell command
sent Retention: nil unconditionally, leaving CLI and IaC users with no
way to set retention without going through the admin UI. Add three
flags so the shell matches the existing surface:
-retention <duration> Go duration string (e.g. 168h, 30m)
-retentionSeconds <int> raw seconds (mutually exclusive with -retention)
-retentionEnabled bool toggle for retention enforcement
Behavior:
- If none of the retention flags are set, the request omits Retention
(`nil`) — preserving the prior "leave server-side state alone"
semantics for callers that only care about partition count.
- Setting any retention flag populates TopicRetention with both fields
so existing operators keep working when only one is provided.
- -retention and -retentionSeconds together is a hard error (ambiguous);
negative values are rejected.
The new behavior is detected via flag.FlagSet.Visit so default values
of 0 / false are distinguishable from "not provided".
Help text updated with examples for both setting a TTL and disabling
retention on an existing topic. No proto / server changes needed; this
is a CLI-only patch.
* broker, shell: address review for mq.topic.configure retention
Three follow-up fixes for the review comments on the original commit:
1. Server-side: detect retention changes in the early-return path.
Previously ConfigureTopic returned without persisting when
partitionCount + schema were unchanged, even if the request supplied
a different Retention. Now the early-return branch checks both
schema and retention, persists either or both when they differ, and
logs which fields actually changed.
2. Server-side: preserve existing retention when request.Retention is
nil in the fresh-allocation path. Capture the prior resp.Retention
before overwriting `resp = &mq_pb.ConfigureTopicResponse{}`, and
only overwrite the new resp.Retention with `request.Retention` when
the request actually supplies one. Otherwise carry the previous
retention forward, so partition-count changes (or any path that
bypasses the early-return branch) don't accidentally clear retention.
3. CLI: switch the `-retention` / `-retentionSeconds` mutual-exclusion
check from value-based (`!= 0`) to flag.FlagSet.Visit-based, so an
explicit `-retention=0 -retentionSeconds=N` is also rejected.
4. CLI: when any retention flag is set, fetch the current
GetTopicConfiguration and fill in the fields the user didn't
explicitly provide. This means `-retentionEnabled` alone no longer
zeros the existing duration, and `-retention 24h` alone preserves
the existing enabled flag. When the topic doesn't exist yet, the
GetTopicConfiguration error is treated as "no current state" and
we proceed with just the user-supplied values.
Build / vet / gofmt / `go test ./weed/shell/... ./weed/mq/broker/...`
clean.
Add Guard.IsAdminAuthorized, a fail-closed variant of IsWhiteListed, and use
it to gate destructive volume admin RPCs. IsWhiteListed keeps its
allow-all-when-empty semantics for HTTP compatibility.
For TCP peers with an empty whitelist, off-host callers are rejected but
loopback (127.0.0.0/8, ::1) is still trusted. A volume server commonly
cohabits with the master/filer on a single host and in integration-test
clusters; the loopback exception keeps cluster-internal admin traffic
working without -whiteList while still locking out off-host attackers.
Non-TCP peers (in-process / bufconn / unix-socket) bypass the host check
entirely. When `weed server` runs master+volume+filer in a single process
the master dials the volume server in-process and the peer address surfaces
as "@", which has no parseable IP. Such a caller shares our OS process and
cannot be spoofed by a remote attacker, so we treat it as trusted by
construction.
The gate also tolerates a nil guard (developmental / embedded path) and only
enforces once a guard is wired up. UpdateWhiteList skips entries whose CIDR
fails to parse so the IP-iteration path can no longer hit a nil *net.IPNet.
* feat(s3/lifecycle): daily-replay observability metrics + per-run summary log
Operators have no Prometheus signal today for the daily_replay path
beyond the cluster-rate-limiter wait histogram. Phase 6 adds the
three baseline questions: how long does a shard take, how many events
did it scan, and what did dispatch produce.
- S3LifecycleDailyRunShardDurationSeconds (histogram, label=shard):
wall-clock per shard. p95 climbing toward MaxRuntime means the
shard is brushing its budget.
- S3LifecycleDailyRunEventsScanned (counter, label=shard): meta-log
events drainShardEvents processed. Pairs with the duration so a
spike in events-per-shard correlates with a slow shard.
- S3LifecycleDispatchCounter (existing, reused): processMatches now
increments this with the outcome label, so streaming and
daily_replay paths share one outcome view. Transport errors are
counted under outcome="TRANSPORT_ERROR".
dailyrun.Run logs a per-run summary at V(0): status / shards /
errors / duration. The summary is the at-a-glance line operators read
in /var/log to confirm a run completed.
Test pins the dispatch-counter increment with a unique
bucket/kind/outcome triple so a refactor that drops the
instrumentation call surfaces as a test failure.
* fix(s3/lifecycle): align dispatch error label + clean test labels
Two PR-9462 review fixes from gemini:
1. processMatches' transport-failure label was "TRANSPORT_ERROR";
streaming's dispatcher uses "RPC_ERROR" for the same condition
(see dispatcher/dispatcher.go). Use "RPC_ERROR" here too so
the same Prometheus query covers both delete paths.
2. The dispatch-counter assertion test now deletes its label row
on exit so the in-process Prometheus registry doesn't accumulate
per-test state across the suite.
* feat(s3/lifecycle): plumb RetentionWindow into dailyrun.Config
Adds a Config.RetentionWindow field that runShard threads into
engine.PromotedHash. Zero (the default) falls back to maxTTL, which
matches Phase 4a behavior — PromotedHash stays empty and the
partition-flip recovery trigger stays dormant.
Pure plumbing. The handler still passes zero so nothing changes at
runtime. The walker work (Phase 4b proper) sets a real retention from
the meta-log boundary and the partition-flip trigger starts firing.
* feat(s3/lifecycle): WalkerDispatcher adapter for the daily-run walker
Phase 4b prep. Implements bootstrap.Dispatcher on top of LifecycleClient
so the same LifecycleDelete RPC drives both the meta-log replay path
and the walker. No CAS witness — the server's identityMatches treats
nil ExpectedIdentity as a bootstrap call and rebuilds the witness from
the live entry, which is the right contract for a full-tree walk.
Adds VersionID to bootstrap.Entry so versioned-bucket walks address
the right version. MPU init uses DestKey for ObjectPath (matching the
prefix-match contract); rejecting empty DestKey keeps malformed init
records out of the dispatch path.
Not wired yet — runShard still doesn't invoke the walker. Follow-up
commits add the ListFunc adapter and the recovery-branch wiring.
* feat(s3/lifecycle): wire Walker hook into runShard's recovery branch
Adds a Config.Walker callback that fires on rule-content edit /
partition flip BEFORE the cursor rewinds, so already-due objects across
the rewritten rule set get caught instead of waiting on meta-log
replay alone. The callback receives engine.RecoveryView(snap) and the
per-shard ID; nil disables it (Phase 4a behavior preserved).
Decoupling the wiring from the implementation: the handler-side
WalkerFunc that drives bootstrap.Walk via the filer is the follow-up
commit, and tests can stub the callback without standing up the full
filer/client/lister harness.
Tests pin: walker fires exactly once on hash mismatch, walker error
propagates and leaves the cursor unchanged, nil Walker is a no-op.
* feat(s3/lifecycle): WalkBuckets composes ListFunc + Dispatcher per shard
Adds dailyrun.WalkBuckets — the composable driver the handler-side
WalkerFunc will call. Iterates a bucket list, wraps the supplied
bootstrap.ListFunc with a per-shard filter (Path for non-MPU, DestKey
for MPU init), and runs bootstrap.Walk per bucket using the supplied
Dispatcher. First bucket error wins; remaining buckets log and run to
completion so one filer flake doesn't kill the shard.
Composable rather than monolithic so callers and tests can swap parts:
production uses a filer-backed ListFunc + WalkerDispatcher; tests use
bootstrap.EntryCallback + a stub. The filer-backed ListFunc is the
next commit.
Tests pin: shard filter routes only matching entries, MPU shard uses
DestKey not the .uploads/<id> path, single-bucket error propagates
while other buckets still run, ctx cancellation short-circuits between
buckets, nil guards on view/list/dispatch.
* feat(s3/lifecycle): filer-backed ListFunc for the daily-run walker
Phase 4b: dailyrun.FilerListFunc returns a bootstrap.ListFunc that
streams entries under <bucketsPath>/<bucket> by paginated SeaweedList.
Recurses into regular directories; .versions/ and .uploads/ are
skipped at this stage so they don't surface as raw children — the
sibling expansion (versioned NoncurrentDays state, MPU init dispatch)
lands in the next commit.
listAll and isVersionsDir are ported from scheduler/bootstrap.go's
same-named helpers. Phase 5 deletes the scheduler copies along with
the streaming path.
Tests pin: flat listing, recursion through nested directories,
.versions/ and .uploads/ skipped, kill-resume via the start path
contract, nil-client error, attribute propagation (mtime / size /
IsLatest default).
* feat(s3/lifecycle): versioned-sibling expansion in FilerListFunc
Adds the .versions/<key>/ expansion to the daily-run's filer-backed
ListFunc. Each call emits one bootstrap.Entry per sibling (real
version files + the bare null version, when found) with the same
sibling state the streaming bootstrap injects via reader.Event:
- Path = logical key (not the .versions/<file> physical path), so
bootstrap.Walk's MatchPath uses the user's intended path.
- VersionID per sibling (version_id or "null").
- IsLatest resolved via parent's ExtLatestVersionIdKey, falling back
to explicit-null-bare, falling back to newest-by-mtime.
- NoncurrentIndex rank computed against the latest's position.
- SuccessorModTime: SuccessorFromEntryStamp if stamped, else the
previous-newer sibling's mtime (legacy derivation).
- IsDeleteMarker from ExtDeleteMarkerKey.
- NumVersions = len(siblings).
Two-pass walk so .versions/ dirs run before regular files; the bare
null-version path is recorded in skipBare so pass 2 doesn't emit it
twice.
expandVersionsDir and lookupNullVersion are ported from
scheduler/bootstrap.go. Sort order, latest resolution, and successor
derivation must agree with that path verbatim so streaming and walker
reach the same verdict on the same objects. Phase 5 deletes the
scheduler copy.
MPU init (.uploads/<id>) remains skipped — the dedicated commit emits
it with IsMPUInit and DestKey.
Tests pin: pointer-wins latest resolution, no-pointer newest-sibling
fallback, explicit-null-is-latest with skipBare suppression of the
bare emission, coincidentally-named .versions folder recursing as a
regular subdir, delete-marker propagation.
* feat(s3/lifecycle): emit MPU init records from FilerListFunc
Last gap in the filer-backed ListFunc. A directory at .uploads/<id>
carrying ExtMultipartObjectKey is the MPU init record; emit one
bootstrap.Entry with IsMPUInit=true and DestKey set to the user's
intended path. The walker's MatchPath uses DestKey for prefix
matching; the WalkerDispatcher uses it for the LifecycleDelete RPC's
ObjectPath. .uploads/<id> directories without the extended key are
mid-write before metadata landed and stay skipped.
isMPUInitDir is upgraded from the path-shape-only stub to the full
shape + extended-attr check that mirrors router.mpuInitInfo and
scheduler/bootstrap.go's same-named helper.
Tests pin: valid init record emits with the right DestKey, missing
ExtMultipartObjectKey skips the directory.
* feat(s3/lifecycle): wire walker into executeDailyReplay
Activates the recovery-branch walker. The handler composes the three
Phase 4b building blocks — FilerListFunc + WalkerDispatcher + WalkBuckets
— into a dailyrun.WalkerFunc and passes it via Config.Walker. The
bucket list is derived from the compiled inputs so it matches the
engine snapshot exactly.
Effect on master behavior: when a worker observes a RuleSetHash or
PromotedHash mismatch on its persisted cursor (rule content edited /
partition flip), runShard now walks the live filer tree under the
RecoveryView before rewinding the cursor. Already-due objects across
the rewritten rule set fire immediately instead of waiting on the
sliding meta-log replay.
Still scoped to replay-eligible action kinds because
checkSnapshotForUnsupported continues to reject walker-bound rules
(ExpirationDate / ExpiredDeleteMarker / NewerNoncurrent) and
scan_only-promoted rules at the top of Run. The follow-up commit
relaxes the gate once the steady-state walker over RulesForShard's
walk view is wired so those rules fire every day, not just on rule
edits.
* feat(s3/lifecycle): steady-state walker + drop unsupported-rule gate
Adds the second walker invocation in runShard. After the recovery
check passes, runShard derives the walk view via snap.RulesForShard
(using the same retentionWindow PromotedHash used, so the partition
is consistent) and runs the walker over it. The view holds
walker-bound action kinds (ExpirationDate / ExpiredDeleteMarker /
NewerNoncurrent) plus any replay-eligible rules promoted to walk by
retention shortage; an empty view skips the call so non-versioned,
replay-only deployments don't pay an O(N) bucket walk per run.
With the walker now servicing every rule kind, checkSnapshotForUnsupported
and its UnsupportedRuleError type are obsolete. router.Route gates
replay on Mode == ModeEventDriven, so walker-bound and scan_only
rules are silently dropped by replay and picked up by the walker
instead — no double-dispatch. Drop the gate, delete replayability.go
+ replayability_test.go, and remove the handler's redundant
IsUnsupportedRule branch.
* fix(s3/lifecycle): walker dispatcher nil-response guard + retention-comment
Two PR-review fixes on 9459:
1. WalkerDispatcher.Delete used to panic on a (nil, nil) RPC return —
add a defensive nil-response check so the walk halts cleanly
instead. Spotted by coderabbit.
2. The retentionWindow=maxTTL comment in runShard claimed PromotedHash
"stays empty" in fallback mode, which gemini correctly pointed out
is only true once rules are active. During bootstrap (rules
compiled but IsActive=false) MaxEffectiveTTL is 0 while
PromotedHash counts every non-disabled rule, so promoted becomes
non-empty and the next post-activation run hits the recovery
branch. That's the intended bootstrap walk — rewrite the comment
to explain it rather than misstate the invariant.
Test: pins nil-response → error path on WalkerDispatcher.
* fix(s3/lifecycle): explicit stale-pointer fallback in versioned expansion
Reviewer caught a structural bug in expandVersionsDir's latest
resolution: when ExtLatestVersionIdKey was set but no scanned sibling
carried that id (stale pointer), the code left latestPos at the
default 0 without ever entering the no-pointer fallback. Today the
two paths yield the same value (newest sibling wins), but the
implicit fall-through makes the intent unclear and would break
silently if the no-pointer branch ever did anything more than
latestPos=0.
Track a pointerResolved flag explicitly so the no-pointer branch
(including the explicit-null-bare check) re-runs on a stale pointer.
Behavior unchanged today.
Test pins: stale pointer + two real versions falls back to
newest-sibling (vnew, not vold).
* feat(s3/lifecycle): walker-side dispatch metrics in WalkerDispatcher
Mirrors the Phase 6 instrumentation already on the replay side
(processMatches) onto the walker's Delete dispatch. Every walker
dispatch now bumps S3LifecycleDispatchCounter with the resolved
outcome (or TRANSPORT_ERROR / NIL_RESPONSE for the failure paths) so
streaming, daily_replay's replay drain, and daily_replay's walker
share a single per-(bucket, kind, outcome) counter view.
Lands together with the rest of Phase 4b — no new metric, just an
extra observation site for the existing one.
volume: require admin auth and refuse loopback endpoints in FetchAndWriteNeedle
Gate the RPC behind checkGrpcAdminAuth for parity with the rest of the
destructive volume-server RPCs, and reject cluster-internal remote S3
endpoints (loopback / link-local / IMDS / RFC 1918 / CGNAT) before
dialing. Pin the validated address against DNS rebinding by routing the
AWS SDK through an HTTP transport whose DialContext re-resolves the host
and re-applies the deny list on every dial, so an endpoint that resolves
to a public IP at validate-time and then flips to 127.0.0.1 at connect
time is refused. Operators that legitimately fetch from private hosts
can opt out with -volume.allowUntrustedRemoteEndpoints.
Every IAM RPC (CreateUser, PutPolicy, CreateAccessKey, ...) now requires
a Bearer token in the authorization metadata, signed with the filer
write-signing key. The service refuses to register on a filer that has
no jwt.filer_signing.key set, so the unauthenticated default is gone:
operators who use these RPCs must configure the key and attach a token
on every call.
Bearer scheme matching is case-insensitive (RFC 6750), every handler
nil-checks req before dereferencing it, and tests now cover the
expired-token path.
The allowed_prefixes check used a literal byte-prefix match, so a token
scoped to /tenant1 also matched /tenant1234, /tenant1-old, and similar
sibling paths. Match on /-separated path components after path.Clean
normalisation instead.
fix(storage): refuse to load .vif-only entry as regular volume when .ecx exists
Defensive root-cause fix for issue #9448. The detection-side guard in
the EC plugin worker already breaks the infinite re-encode loop, but
the underlying volume-server state — `.vif` preserved next to EC shards
when the source replica is destroyed — can still re-arm a phantom
regular volume via the MountVolume / LoadVolume path.
In loadExistingVolume, the existing `.ecx`-present check is gated on
the caller passing `skipIfEcVolumesExists=true`. The startup-scan path
(concurrentLoadingVolumes) does pass that flag and correctly skips
the `.vif`. The LoadVolume → loadExistingVolume(…, false, …) path
used by VolumeMount does NOT, so it falls through to NewVolume, which
calls v.load with createDatIfMissing=true and creates a phantom
empty `.dat`. The master then reports the volume as regular and EC
detection re-proposes it.
Hoist the `.ecx`-present check so it runs unconditionally for `.vif`
entries: if the EC index is on the disk, the `.vif` belongs to those
EC shards, never to a regular volume that should be resurrected.
Pure OSS clusters never reach this exact state today (OSS deletes
`.vif` unconditionally during Destroy), but the guard hardens the
load path against any future path that leaves the same state.
Test:
- TestLoadExistingVolumeSkipsVifWhenEcxPresent builds the exact
post-#9448 disk layout (`.vif` + `.ecx`, no `.dat`) and asserts
loadExistingVolume(skipIfEcVolumesExists=false) returns false,
does not create a placeholder `.dat`, and does not register a
phantom volume in l.volumes.
* fix(ec): skip re-encode when EC shards already exist for the volume (#9448)
When an earlier EC encoding succeeded but the post-encode source-delete
left a regular replica behind on one of the servers, the next detection
cycle proposes the same volume again. The new encode tries to redistribute
shards to targets that already have them mounted, the volume server
returns `ec volume %d is mounted; refusing overwrite`, the task fails,
and detection re-queues the volume. The cycle repeats forever — issue
#9448.
The existing `metric.IsECVolume` skip catches the case where the canonical
metric is reported on the EC-shard side of the heartbeat, but when the
master sees BOTH a regular replica AND its EC shards in the same volume
list, the canonical metric we pick is the regular replica and
IsECVolume is false. Add a second guard that checks the topology
directly via `findExistingECShards` (already present and indexed) and
skip the volume when any shards exist, logging a warning that points
the admin at the stuck source.
This breaks the loop. Auto-cleanup of the orphaned replica is left as
follow-up work — deleting a source replica from inside the detector is
only safe with a re-verification step right before the delete, plus a
config opt-in, and is best done in its own change.
* fix(ec): #9448 guard only fires when EC shard set is complete
The first version of the #9448 guard tripped on `len(existingShards) > 0`,
which is broader than necessary. The existing recovery branch in the
encode arm (around the `existingECShards` block, ~line 216) is designed
to fold partial leftover shards from a previously failed encode into
the new task as cleanup sources. Skipping unconditionally on any
existing shards made that branch dead code, regressing the recovery
behavior Gemini flagged in the review of af09e1ec7.
Two corrections:
1. New helper `countExistingEcShardsForVolume` walks each disk's
`EcIndexBits` bitmap and ORs the results into a `ShardBits`,
returning the distinct-shard popcount. This is the right unit:
a single `VolumeEcShardInformationMessage` can carry several
shards, so `len(EcShardInfos)` is not the same as the number
of present shards. Per Gemini's "use helper functions that walk
the actual shard bitmap" note.
2. The guard now fires only when `shardCount >= totalShards`.
Partial shard sets fall through to the existing recovery branch,
unchanged.
Tests:
- TestDetectionSkipsWhenECShardsAlreadyExist: complete shards →
no proposal (the regression test for #9448 itself, unchanged
intent, rewritten on top of new helpers).
- TestDetectionAllowsRegularReplicaWhenShardsPartial: partial
shards → guard does NOT swallow the volume; the encode arm
still gets a chance.
- TestCountExistingEcShardsForVolume: the helper walks the
bitmap correctly even when one info entry packs multiple
shards on one disk.
The dangerous `volume.delete` hint in the warning is unchanged for
now — it gets fixed in the next commit.
* fix(ec): drop dangerous shell-command hint from #9448 warning
The previous warning told operators to run `volume.delete -volumeId=%d`
in the SeaweedFS shell to clean up the orphaned source replica. That
command is cluster-wide — it deletes every replica of the volume,
including the EC shards, which share the same volume id. Running it
in the state the message describes would cause the data loss the
guard exists to prevent.
Replace it with explicit guidance that the cleanup must be a targeted
VolumeDelete RPC against the source server only, and that the
shell command is the exact wrong thing to use here. The next two
commits add the plumbing and the auto-execution of that targeted
delete so most operators never see this hint at all.
Per Gemini comment on af09e1ec7.
* feat(worker): plumb grpc dial option through ClusterInfo
Add ClusterInfo.GrpcDialOption (optional) and set it in the
erasure_coding plugin handler. Lets the detector make targeted
gRPC calls during detection — used by the follow-up commit to
auto-clean orphan source replicas via VolumeDelete RPCs.
Zero-value safe: existing detectors that don't need RPC access
get a nil DialOption and ignore the field.
* feat(ec): auto-clean orphan source replica via targeted VolumeDelete
Builds on the previous commits: the guard now identifies the
#9448 stuck-source state and a gRPC dial option is available on
ClusterInfo. When both are true, detection auto-cleans the
orphaned regular replica instead of just warning the operator.
New helper `cleanupOrphanSourceReplicas`:
1. Re-verifies the EC shard set is still complete via
`countExistingEcShardsForVolume` against the live topology
snapshot. If the count dropped between detection start and
the cleanup decision (a volume server going down mid-cycle),
it aborts — the source replica is the only complete copy and
deleting it without a healthy shard set would be data loss.
2. Issues targeted VolumeDelete RPCs to each regular-replica
server via `operation.WithVolumeServerClient`. That RPC only
touches the regular volume on the targeted server; EC shards
live in a separate store path and are not affected. This is
the safe alternative to the cluster-wide `volume.delete`
shell command we previously warned against.
If the cleanup partially fails (one replica delete errors, others
succeed), detection logs the failure and continues to skip the
volume. The next detection cycle will try again. We deliberately
don't fall back to a re-encode because that would just collide
with the mounted shards on the targets again.
When no dial option is available the existing warning still
points operators at the safe manual procedure.
* feat(s3/lifecycle): swap daily_run to engine hash APIs (Phase 4a)
Replace the local replay-content-hash / max-effective-TTL helpers in
dailyrun with the engine package's canonical versions (ReplayContentHash,
MaxEffectiveTTL, PromotedHash) that landed with the Phase 4 view surface.
Adds PromotedHash to the cursor's recovery triggers: a partition flip
(rule moving between replay and walk because retention shifted) now
fires the rule-change branch alongside RuleSetHash mismatch. The
retentionWindow is set to MaxEffectiveTTL today, which keeps the
promoted set empty and the trigger dormant; Phase 4b will plumb the
real meta-log retention boundary so true scan_only promotions are
detected.
Cursor schema is unchanged — PromotedHash was already persisted as
the zero hash in Phase 2.
* docs(s3/lifecycle): note the one-time cursor rewind on hash format change
gemini-code-assist flagged that swapping localReplayContentHash for
engine.ReplayContentHash changes the persisted RuleSetHash byte layout
(sort order + tagged-field encoding). Phase-2 cursors mismatch on first
post-upgrade run and drop into the rule-change branch.
Going with option 3 (document the intentional one-time rewind). The
rewind is bounded to runNow - maxTTL (not time-zero), self-healing on
the next save, and daily_replay is off by default so the affected
population is limited to early adopters of the algorithm flag. A
migration shim or a hash-compat layer would carry the legacy encoder
forever for one bounded re-scan; not worth it.
Comment in runShard makes the trade explicit so a future reader doesn't
hunt for the "why does my cursor rewind once after upgrade" mystery.
* chore(s3/lifecycle): trim verbose comments in dailyrun
Cut multi-paragraph headers and narration that just described what the
code does. Kept the small WHY notes (per-match skip vs per-rule, the
one-time post-upgrade cursor rewind, scan_only rejection rationale).
Same behavior, ~150 fewer lines of comment.
* fix(s3/lifecycle): persist PromotedHash on the successful runShard save
The comment-trim pass dropped the field alongside a "stays empty in
Phase 2" comment. Harmless today (promoted is always zero), but Phase 4b
turns promoted into a real value — and a save that writes zero would
make the next run falsely detect drift and rewind. Spotted by
gemini-code-assist on PR 9457.
Other save paths (recovery, drain-error) already persisted it; the
success path is the only one that was missing it. Now consistent.
* fix(ec): carry source disk type on VolumeEcShardsMount (#9423)
When EC shards land on a target whose disk type differs from the
source volume's, master heartbeats wrongly reported under the target
disk's type. Add source_disk_type to VolumeEcShardsMountRequest; the
target server applies it to the in-memory EcVolume via SetDiskType so
the mount notification and steady-state heartbeat both carry the
source's disk type. Empty value falls back to the location's disk
type (used by disk-scan reload paths).
The override is not persisted with the volume — disk type stays an
environmental property and .vif remains portable.
* fix(ec): plumb source disk type through plugin worker (#9423)
Add source_disk_type to ErasureCodingTaskParams (field 8; 7 reserved),
populate it from the metric the detector already collects, thread it
through ec_task into the MountEcShards helper, and forward it on the
VolumeEcShardsMount RPC.
* fix(ec): mirror source disk type plumbing in rust volume server (#9423)
The volume_ec_shards_mount handler now forwards source_disk_type into
mount_ec_shard → DiskLocation::mount_ec_shards. When non-empty it
overrides ec_vol.disk_type (and each mounted shard's disk_type) via
the new set_disk_type method; empty value keeps the location's disk
type, so disk-scan reload and reconcile paths are unchanged.
Also picks up two pre-existing proto drifts that 'make gen' synced
from weed/pb (LockRingUpdate in master.proto, listing_cache_ttl_seconds
in remote.proto).
* feat(ec): bias placement toward preferred disk type (#9423)
Add DiskCandidate.DiskType and PlacementRequest.PreferredDiskType.
When PreferredDiskType is non-empty, SelectDestinations partitions
suitable disks into matching/fallback tiers and runs the rack/server/
disk-diversity passes on the matching tier first; the fallback tier
is only consulted if the matching pool can't satisfy ShardsNeeded.
PlacementResult.SpilledToOtherDiskType lets callers warn on spillover.
Empty PreferredDiskType keeps the existing single-pool behavior.
* fix(ec): plumb source disk type into placement planner (#9423)
diskInfosToCandidates now copies DiskInfo.DiskType into the placement
candidate, and ecPlacementPlanner.selectDestinations forwards
metric.DiskType as PreferredDiskType so EC shards land on disks
matching the source volume's disk type when possible. A glog warning
fires when placement had to spill to other disk types.
* test(ec): integration coverage for source-disk-type plumbing (#9423)
store_ec_disk_type_test exercises Store.MountEcShards end-to-end: a
shard physically lives on an HDD location, MountEcShards is called
with sourceDiskType="ssd", and the test asserts that the in-memory
EcVolume, the mounted shard, the NewEcShardsChan notification, and
the steady-state heartbeat all report under the source's disk type.
A companion test pins the empty-source path so disk-scan reload
keeps the location's disk type.
detection_disk_type_test exercises the worker plumbing: with a
cluster of nodes carrying both HDD and SSD disks, planECDestinations
must place every shard on SSD when metric.DiskType="ssd"; with only
one SSD node and 13 HDD nodes it must still satisfy a 10+4 layout
via spillover (and log a warning).
* revert(ec): drop unrelated proto drift in seaweed-volume/proto (#9423)
make gen pulled two pre-existing OSS changes into the rust proto
tree (LockRingUpdate / by_plugin in master.proto,
listing_cache_ttl_seconds in remote.proto). Reviewers flagged it as
scope creep — none of the rust EC fix references those fields.
Restore both files to origin/master so this branch only touches
EC-related symbols.
* fix(ec placement): treat empty disk type as hdd and skip used racks on spill (#9423)
partitionByDiskType used raw string comparison, so a PreferredDiskType
of "hdd" never matched candidates whose DiskType is "" (the
HardDriveType sentinel that weed/storage/types uses). EC encoding of
an HDD source would spill onto any HDD reporting "" even when the
cluster has plenty of matching capacity. Normalize both sides
through normalizeDiskType, which lowercases and folds "" → "hdd",
mirroring types.ToDiskType without taking a dependency on it.
selectFromTier's rack-diversity pass also kept revisiting racks the
preferred tier had already used when running on the fallback tier,
which negated PreferDifferentRacks on spillover. Skip racks already
in usedRacks so fallback placements still spread onto new racks.
* fix(ec): empty-source remount must not clobber existing disk type (#9423)
mount_ec_shards_with_idx_dir runs more than once per vid (RPC mount,
disk-scan reload, orphan-shard reconcile). After an RPC sets the
source-derived disk type, any later call passing source_disk_type=""
was resetting ec_vol.disk_type back to the location's value, which
reintroduces the heartbeat drift this PR is meant to fix. Only
default to the location's disk type when the EC volume is fresh
(no shards mounted yet); otherwise leave the recorded type alone so
empty-source reloads preserve whatever the original mount RPC set.
* feat(s3/lifecycle): cluster rate-limit allocation (Phase 3)
Admin computes a per-worker share of cluster_deletes_per_second at
ExecuteJob time and ships it to the worker via
ClusterContext.Metadata. The worker reads the share, constructs a
golang.org/x/time/rate.Limiter, and passes it to dailyrun.Run via
cfg.Limiter (Phase 2 already plumbed the field). Phase 5 deletes the
streaming path; until then streaming ignores the cap.
Why allocate at admin: the cluster cap is a single knob operators
care about. Dividing it locally per worker would either need
out-of-band coordination or accept N× the configured budget. Admin
is the only party that knows how many execute-capable workers there
are, so it owns the math.
Admin side (weed/admin/plugin):
- Registry.CountCapableExecutors(jobType) returns the number of
non-stale workers with CanExecute=true.
- New file cluster_rate_limit.go: decorateClusterContextForJob clones
the input ClusterContext and injects two metadata keys for
s3_lifecycle. cloneClusterContext duplicates Metadata so per-job
decoration doesn't race shared base state.
- executeJobWithExecutor calls the decorator after loading the admin
config; other job types pass through unchanged.
Worker side (weed/worker/tasks/s3_lifecycle):
- New cluster_rate_limit.go declares the constants both sides agree
on (admin-config field names, metadata keys). Plain strings on the
admin side keep weed/admin/plugin free of a dependency on the
s3_lifecycle worker package; the two sets of constants are pinned
to identical values and a mismatch would silently disable rate
limiting.
- handler.go executeDailyReplay reads ClusterContext.Metadata,
builds a rate.Limiter, and passes it into dailyrun.Config{Limiter}.
Missing/empty/non-positive values → no limiter (legacy unlimited
behavior). burst defaults to 2 × rate, clamped to ≥1 to avoid a
bucket that never refills.
- Admin form gains two fields under "Scope": cluster_deletes_per_second
(rate, 0 = unlimited) and cluster_deletes_burst (0 = 2 × rate).
Metric:
- New S3LifecycleDispatchLimiterWaitSeconds histogram observes how
long each Limiter.Wait blocks before a LifecycleDelete RPC.
Operators tune the cap by reading p95 — near-zero means the cap
isn't binding, a long tail at 1/rate means it is.
Tests:
- weed/admin/plugin/cluster_rate_limit_test.go: 9 cases covering
pass-through for non-allocator job types, rps=0 / no-executors
skip, even sharing, burst sharing, burst=0 omit (worker default
kicks in), burst floor of 1, no mutation of input metadata, nil
input.
- weed/worker/tasks/s3_lifecycle/cluster_rate_limit_test.go: 7 cases
covering nil/empty/missing metadata, non-positive/invalid rate,
positive rate builds correctly, burst missing defaults to 2× rate,
tiny rate clamps burst to ≥1.
Build clean. Phase 2 (#9446) and Phase 4 engine (#9447) are the
parents; this branch stacks on Phase 2 since it consumes
dailyrun.Config{Limiter} which lands there.
* fix(s3/lifecycle): divide cluster budget by active workers, not all capable
gemini pointed out that s3_lifecycle has MaxJobsPerDetection=1
(handler.go:189) — it's a singleton job, only one worker is ever active.
Dividing the cluster_deletes_per_second budget by the count of capable
executors gave the single active worker just 1/N of the configured cap.
Pass adminRuntime.MaxJobsPerDetection through to the decorator. Divisor
is now min(executors, maxJobsPerDetection), clamped to >=1. For
s3_lifecycle (maxJobs=1) the active worker gets the full budget; for a
hypothetical parallel-dispatch job (maxJobs>1) the budget divides
across the running-set.
Tests swap the SharedEvenly case for two pinned scenarios:
- SingletonJobGetsFullBudget: maxJobs=1 across 4 executors => 100/1
- SharedEvenlyWhenParallelLimited: maxJobs=4 across 4 executors => 25/worker
- MaxJobsExceedsExecutors: maxJobs=10 across 4 executors => divisor 4
* feat(s3/lifecycle): drop Worker Count knob from admin config form
The "Worker Count" admin field controlled in-process pipeline goroutines
across the 16-shard space — per-worker tuning, not a cluster-wide scope
concern. Operators looking at the form alongside Cluster Delete Rate
reasonably misread it as the number of workers in the cluster.
Drop the form field and DefaultValues entry. cfg.Workers is now hardcoded
to shardPipelineGoroutines (=1) inside ParseConfig; the rest of the
plumbing through dailyrun.Config.Workers stays so a future need can
re-introduce it as a worker-local knob (or just bump the constant).
handler_test.go pins that "workers" must NOT appear in the form so the
removal doesn't silently regress.
* feat(s3/lifecycle/engine): daily-replay view surface (Phase 4 engine)
Adds the engine-side API the new daily-replay worker reaches for:
per-view snapshot construction (RulesForShard, RecoveryView), the two
cursor hashes that gate recovery (ReplayContentHash, PromotedHash),
and the cursor sliding-window helper (MaxEffectiveTTL). CurrentSnapshot
is a stub keyed on a package-level atomic that the worker startup wiring
populates.
Views return new *Snapshot instances holding cloned *CompiledAction
values so per-clone active/Mode never leak across partitions. Replay
clones force Mode=ModeEventDriven to rehabilitate any persistent
ModeScanOnly carried over from PriorState; walk and recovery clones
preserve Mode as-is. Disabled actions are excluded from all views.
No production caller is wired here — Phase 4's walker/dailyrun
integration is the follow-up. dailyrun's local helpers
(localReplayContentHash, localMaxEffectiveTTL) become one-line
redirects to these exports.
API surface:
- CurrentSnapshot() *Snapshot — stub until Phase 4 wiring.
- SetCurrentEngine(*Engine) — Phase 4 wiring entry point.
- Snapshot.RulesForShard(shardID, retentionWindow) (replay, walk *Snapshot)
- RecoveryView(s *Snapshot) *Snapshot — force-active over the full set.
- ReplayContentHash(s *Snapshot) [32]byte — partition-independent.
- PromotedHash(s *Snapshot, retentionWindow) [32]byte — partition-flip.
- MaxEffectiveTTL(s *Snapshot) time.Duration — over active replay only.
30 unit tests covering clone isolation, Mode rewrite, partition
membership including the multi-action-kind XML rule split,
RecoveryView activating pre-BootstrapComplete actions,
ReplayContentHash partition-independence, PromotedHash sensitivity to
promotion in either direction, MaxEffectiveTTL aggregation. Build +
race-tests green.
* refactor(s3/lifecycle/engine): consolidate hash helpers; clarify shardID semantics
Addresses PR #9447 review feedback. Three medium-priority items from
gemini, all code-quality refinements (no behavior change):
1. Duplicated sort comparator between ReplayContentHash and
PromotedHash. Extract sortHashItems shared helper so the two
hashes use the same ordering by construction — if one drifted, the
cursor could see a spurious "rule changed" on a no-op snapshot
rebuild.
2. Duplicated writeField/writeInt closures. Extract hashWriter struct
holding the sha256 running hash + lenbuf, with method helpers.
Same allocation profile (one Hash, one tiny stack buffer per
helper); just deduplicates ~20 lines.
3. shardID parameter on RulesForShard is unused. Per the design's
open question, every shard sees every rule today (shard filter
runs at the entry-iteration site, not view construction). Keep
the parameter for API stability — removing it now would force
a breaking change when bucket-shard ownership lands — and update
the doc comment to explain why it's reserved.
go build ./... clean; engine test suite green.
* docs(s3lifecycle): design for daily-replay worker
Captures the algorithm and dev plan iterated on in PR #9431 and the
discussion leading up to it: per-shard daily meta-log replay, walker
as a per-day pass for ExpirationDate/ExpiredDeleteMarker/NewerNoncurrent
plus a recovery branch over engine.RecoveryView(snap), explicit
retention-window input to RulesForShard, two cursor hashes
(ReplayContentHash + PromotedHash) that together detect every
invalidation case. Implementation phases are sequenced so each can
ship independently — Phase 1 (noncurrent_since stamp) just landed.
* feat(s3/lifecycle): daily-replay worker behind algorithm flag (Phase 2)
New weed/s3api/s3lifecycle/dailyrun package implementing the bounded
daily meta-log scan from the design doc. One pass per Execute per
shard: load cursor, scan events forward, route each through router.Route,
dispatch any due Match, advance the cursor on success. Halt-on-failure
keeps the cursor at the last fully-processed event so tomorrow resumes
from the same point — head-of-line blocking is the deliberate failure
signal.
Replay-only in this phase. Phase 4 wires the walker for ExpirationDate,
ExpiredDeleteMarker, NewerNoncurrent, and scan_only-promoted rules.
Until then a typed UnsupportedRuleError refuses runs on those buckets:
operators see the rejection in the activity log rather than silently
losing rules.
Behavior:
- Per-shard cursor {TsNs, RuleSetHash, PromotedHash} JSON-persisted
under /etc/s3/lifecycle/daily-cursors/. PromotedHash always-empty in
Phase 2; Phase 4 turns it on.
- Rule-change branch rewinds cursor to now - max_ttl when the
replay-content hash mismatches. Cold start uses the same floor.
- Transport errors retry 3x with exponential backoff capped at 5s;
server outcomes (RETRY_LATER / BLOCKED) halt the run without retry.
- Empty-replay sentinel: cursor TsNs=0 when no replay-eligible rules
exist, only the hash gates a future addition.
Worker shape:
- New admin config field "algorithm" with enum streaming|daily_replay,
default streaming. Existing deployments are unaffected.
- handler.Execute branches on the flag: streaming routes through the
current scheduler.Scheduler, daily_replay routes through
dailyrun.Run.
- dispatcher.NewFilerSiblingLister exported so both paths share the
same .versions/ + null-bare lookup.
Engine integration:
- Local replayContentHash + maxEffectiveTTL helpers in dailyrun. Phase
4's engine surface (ReplayContentHash, MaxEffectiveTTL) will replace
them with one-line redirects; the local versions hash the same
fields so the cursor stays valid across the swap.
Tests cover cursor persistence, unsupported-rule rejection,
hash stability under rule reordering, hash sensitivity to TTL edits,
max-TTL aggregation, dispatch retry budget, and request shape
including the identity-CAS witness.
Includes the design doc at weed/s3api/s3lifecycle/DESIGN.md so reviewers
and future phases share the same spec.
* feat(s3/lifecycle): default to daily_replay; streaming becomes the fallback knob
The streaming dispatcher hasn't shipped to users yet, so there's no
backward-compat surface to preserve. Flip the algorithm default from
streaming to daily_replay so the new path is the standard from day
one. Streaming stays as an explicit opt-in escape hatch during the
Phase 4 walker rollout; Phase 5 deletes both the flag and the
streaming code.
Buckets whose lifecycle rules require walker-bound dispatch
(ExpirationDate, ExpiredDeleteMarker, NewerNoncurrent, scan_only)
will fail the daily_replay run with the existing
UnsupportedRuleError until Phase 4 walker integration ships. Operators
hitting that case can set algorithm=streaming until the follow-up
lands.
Updates the test for the default value and renames the
unknown-value-fallback case to reflect the new default.
* fix(s3/lifecycle/dailyrun): drop per-rule done flag — it suppressed due matches
The done map was keyed by ActionKey = {Bucket, RuleHash, ActionKind}.
That's only safe when each event produces at most one match per
ActionKey with a single deterministic due-time formula —
ExpirationDays and AbortMPU fit that shape because due_time
= ev.TsNs + r.days is monotonic in event TsNs.
But NoncurrentDays paired with NewerNoncurrentVersions > 0 (allowed
in Phase 2 since it compiles to ActionKindNoncurrentDays) routes
through routePointerTransitionExpand, which emits matches for every
noncurrent sibling — each with its own SuccessorModTime taken from
the demoting event for that specific sibling. A single event can
therefore produce two matches for the same ActionKey on different
objects with wildly different DueTimes.
With the old code, a not-yet-due sibling encountered first would set
done[ActionKey] = true and then the next sibling — even though its
DueTime had already passed — would be skipped. Future events for the
same rule would also be suppressed for the rest of the run. Objects
that should have been deleted weren't.
Fix: drop the early-stop optimization. Process every match
independently. A future-DueTime match is now silently skipped without
affecting any later match. The performance hit is small (Phase 2 is a
single bounded daily pass, and the rate limiter is the real
throughput governor); the correctness gain is non-negotiable.
Also fixes the inverted comment in processMatches that described the
old check as "due_time is past now" when it actually checked
DueTime.After(now) (i.e., NOT yet due).
Adds four targeted tests:
- not-yet-due match first in slice does not suppress two later
due matches for the same rule;
- reversed slice ordering produces identical dispatch;
- BLOCKED outcome halts the loop before later due matches are sent;
- empty match slice is a no-op.
Phase 4's walker-and-recovery integration can revisit a
per-(rule, object) memoization if profiling argues for it.
* fix(s3/lifecycle/dailyrun): address PR review — cursor advance, mode gate, ctx cancel, snapshot consistency
Addresses PR #9446 review feedback. Eight distinct fixes:
1. CURSOR ADVANCEMENT (gemini, critical). The old code advanced the
persisted cursor to lastOK = TsNs of the last event processed,
including events whose matches were skipped as not-yet-due. Those
skipped matches would never be re-scanned, so objects under
long-TTL rules would never expire.
Track a "stuck" flag in drainShardEvents: the first event with a
skipped (future-DueTime) match stops cursorAdvanceTo from rising,
but the loop keeps processing later events to dispatch any that ARE
due. The persisted cursor sits at the last fully-processed event so
tomorrow's run re-scans from the skipped event onward and the
future-due matches get re-evaluated when they age in.
processMatches now returns (skippedAny, halted, err) so the drain
loop can tell apart "event fully drained" from "event had pending
future-due matches."
2. MODE GATE (gemini). checkSnapshotForUnsupported only checked the
ActionKind. A replay-eligible kind with Mode != ModeEventDriven
(e.g. ModeScanOnly via retention promotion) passed the check but
then got silently ignored by router.Route, which gates dispatch
on Mode == ModeEventDriven. Reject loudly with the typed error
so admin sees the rejection in the activity log.
3. WORKERS CONFIG (gemini). The handler hardcoded 16 concurrent shard
goroutines regardless of cfg.Workers. Add a Workers field to
dailyrun.Config and gate the goroutine fan-out on a semaphore of
that size; the handler now passes cfg.Workers through.
4. SINGLE SNAPSHOT PER RUN (coderabbit). Run() validated against one
snapshot but runShard() pulled a fresh cfg.Engine.Snapshot() per
shard. Mid-run Compile would let shards process different rule
sets. Capture snap at the top of Run, pass it down to every shard.
5. FROZEN runNow (coderabbit). drainShardEvents and processMatches
accepted a `now func() time.Time` and called it multiple times.
DueTime comparisons would slip as the run wore on. Capture runNow
once at the top of Run and thread it through as a time.Time value.
6. CTX CANCELLATION (coderabbit). The drain loop's <-ctx.Done() case
broke out of the loop and returned nil, marking interrupted runs as
successful. Return ctx.Err() instead so the caller propagates the
interrupt; cursorAdvanceTo carries whatever progress was made.
7. CURSOR LOAD VALIDATION (coderabbit + gemini). The persister silently
accepted empty files, mismatched shard_ids, and hash slices shorter
than 32 bytes (copy() would zero-pad). Each now returns a typed
error so the run halts and an operator investigates rather than
silently re-scanning from time zero or persisting a zero-padded
hash that masks corruption forever.
8. DEAD BRANCH (coderabbit). The "lastOK < startTsNs → keep persisted"
guard in runShard was unreachable because drainShardEvents
initialized lastOK := startTsNs and only ever raised it. Removed
along with the new cursor-advancement semantics that handle the
"no events processed" case implicitly.
Plus markdown lint: DESIGN.md fenced code blocks now carry a `text`
language identifier to satisfy MD040.
Skipped from the review:
- gemini's "maxTTL == 0 incorrectly skips immediate expirations":
actions with Days <= 0 don't compile to a CompiledAction (see
weed/s3api/s3lifecycle/action_kind.go: `if rule.X > 0`). The new
empty-replay sentinel uses `rsh == [32]byte{}` for clarity per
gemini's suggested form, but the behavior is equivalent.
Tests added/updated:
- TestProcessMatches_AllDueNoSkippedFlag pins skippedAny=false when
all matches are past their DueTime.
- TestCheckSnapshotForUnsupported_NonEventDrivenModeRejected pins
the new Mode check.
- TestFilerCursorPersister_EmptyFileReturnsError,
_ShardIDMismatchReturnsError, _HashLengthMismatchReturnsError pin
the new validation rules.
- Existing process-matches tests reshaped for the
(skippedAny, halted, err) return tuple.
Full build clean. Dailyrun + worker test packages green.
Run BatchDelete through checkGrpcAdminAuth like the other destructive
volume-server RPCs (VolumeDelete, DeleteCollection, vacuum, EC, ...),
so a whitelist-configured server denies non-admin callers.
* feat(s3): stamp noncurrent_since on versioned demotions
A version's noncurrent TTL clock starts when the next version is
written, not at its own mtime. Today the lifecycle engine derives
that moment from the next-newer sibling's mtime — a heuristic that
drifts if the sibling is later modified and is unavailable when
the demoting event sits outside meta-log retention.
Stamp Seaweed-X-Amz-Noncurrent-Since-Ns on the demoted entry at
the two places where a PUT flips the latest pointer:
updateLatestVersionInDirectory and
updateIsLatestFlagsForSuspendedVersioning. Timestamp source is
time.Now().UnixNano() captured once per demotion — the documented
Phase 1 fallback until the filer write API surfaces its own TsNs.
Engine reads the stamp on both the bootstrap walker path and the
event-driven router; missing/zero falls back to the legacy
sibling-mtime derivation, so pre-stamp entries keep working.
Prerequisite for the daily-replay lifecycle worker (Phase 2+).
* fix(s3): address CI failure and PR review feedback
- Backdating tests must move both clocks: the lifecycle integration
tests backdate version mtimes to simulate aging, but my earlier
commit made the engine prefer the explicit demotion stamp over
sibling mtime, so a real-now stamp dominated a backdated mtime and
the rule never fired. Update backdateVersionedMtime to also rewrite
Seaweed-X-Amz-Noncurrent-Since-Ns when the entry already carries it.
This is a test simplification — production stamps record when the
successor was written, not the demoted version's own mtime — but the
resulting clock is correctly old enough.
- Refactor stamp parsing into one shared helper. Per gemini-code-assist:
the parsing logic for ExtNoncurrentSinceNsKey was duplicated in
router/router.go and scheduler/bootstrap.go. Move it to a new
weed/s3api/s3lifecycle/noncurrent_since.go as exported
SuccessorFromEntryStamp; both call sites now go through it.
- Make the parser ordering test deterministic. Per coderabbitai:
time.Now().UnixNano() drops the monotonic clock component, so
two back-to-back calls can decrease if the wall clock steps
backward — the prior test was exercising OS clock behavior rather
than the parser. Replace with fixed nanosecond values.
- Close a suspended-versioning race. Per coderabbitai: the prior
putSuspendedVersioningObject called updateIsLatestFlagsForSuspendedVersioning
after putToFiler returned, i.e. after the object write lock released.
A concurrent PUT could promote a newer latest version, which we'd
then wipe — leaving the older "null" object incorrectly current.
Move the cleanup into the afterCreate callback so the null write and
the .versions pointer clear (including the new demotion stamp) run
atomically under the same lock. Best-effort logging is preserved.
* fix(s3/lifecycle): clear noncurrent_since stamp on test backdate
Backdating a version's mtime in tests is not a coherent claim about
when it became noncurrent — production stamps record the successor's
PUT time, which the test doesn't manipulate. The prior commit rewrote
the stamp to the backdated instant, but for TestLifecycleNewerNoncurrent
that creates an inconsistent state: v3's stamp says "demoted 30 days
ago" while v4's mtime (the supposed demoter) is real-now. With both
NewerNoncurrentVersions and NoncurrentDays in the same rule, the
NoncurrentDays floor passes against the backdated stamp and the
rank-based check then deletes v3 via the meta-log historical replay
that misranks against current state.
Clearing the stamp instead lets the lifecycle engine fall back to the
sibling-mtime derivation the tests were originally written against:
the legacy code path is preserved end-to-end while the new explicit-
stamp path is exercised by the unit tests in s3lifecycle/noncurrent_since_test.go
and the bootstrap-walker integration in scheduler/bootstrap_test.go.
The deeper interaction — historical meta-log replay ranking against
current state inside routePointerTransitionExpand — is pre-existing
and is no longer masked by the freshly-PUT successor's mtime once the
stamp is read. Tracked separately; not blocking this PR.
* fix(s3): stamp noncurrent_since before the .versions/ pointer flip
The pointer-flip on the .versions/ directory emits a meta-log event that
the lifecycle router consumes via routePointerTransition. The router
then calls LookupVersion on the demoted version's id. With the prior
ordering — pointer flip first, stamp second — the router could read
the demoted entry before markVersionNoncurrent landed and fall back to
the legacy sibling-mtime derivation.
Versioned COPY is the clean break: the new latest version keeps the
source object's mtime instead of recording the moment v_old was
demoted, so the fallback's successor clock can be arbitrarily wrong.
Reorder both updateLatestVersionInDirectory and
updateIsLatestFlagsForSuspendedVersioning so the stamp is written
first; the pointer flip then emits an event into a state where the
stamp is already present.
Failure of the stamp write remains non-fatal — lifecycle still falls
back to the legacy derivation in that case, with the same caveats as
before the PR but no race window.
lookupEntry returned ENOENT whenever the metaCache had the parent marked
cached but the child entry was absent. That's only correct when the
kernel has no record of the path either — when inodeToPath still maps
it, the three layers disagree (#9139). Triggers in practice under bursts
of concurrent metadata ops and after delete/rename events from another
mount drop the local entry without clearing the inode mapping; the test
flake fixed in b94ad8247 was the same shape on a smaller scale.
Trust the filer in that case: fall through to the existing
GetEntry path, which already loudly logs (Warningf with layer state)
when the filer also returns ErrNotFound, and otherwise serves the live
entry. Drop the Warningf from the cached-dir miss branch; it fires
thousands of times under 16-task rclone imports while the real error
path downstream covers the genuine-drift signal.
* fix(master): route ec shard vids to NewEcVids on initial subscribe
ToVolumeLocations appended EC shard volume IDs to NewVids, so a freshly
subscribing master client registered them in the regular-volume map via
addLocation instead of addEcLocation until the next heartbeat-driven
delta arrived. Append to NewEcVids to match the incremental path.
Fixes#9429
* fix(master): dedupe ec vids in initial subscribe snapshot
dn.GetEcShards returns per-(vid, diskId) entries, so a single EC volume
spread across multiple physical disks on one DataNode emitted the same
vid multiple times in NewEcVids. Dedupe so the snapshot carries each
vid once.
ParseUpload runs util.DecompressData on every gzipped multipart upload
just to record OriginalDataSize. The decompress materializes the full
uncompressed slice via bytes.Buffer.ReadFrom inside util.GunzipStream;
for a 64 MiB chunk that's a ~128 MiB heap spike per call (geometric
grow). On 6-way concurrent UploadPartCopy the spike dominated the
remaining heap profile after #9420/#9421/#9422/#9424/#9425.
When no Content-MD5 verification is requested the uncompressed bytes
aren't needed — only the length is. Stream the gunzip through
io.Discard and count: the pooled gzip.Reader's working set replaces
the materialized slice.
Unlike the previous attempt in #9426 the size still comes from the
real bytes, not from a client-set header.
TotalAlloc per call, 4 MiB uncompressed body:
materialize (was, still runs when MD5 is set): ~16.8 MiB
stream-count (no MD5): ~28 KiB
Refs #6541, #9426 (reverted in #9432).
ParseUpload runs util.DecompressData on every gzipped multipart upload
just to record OriginalDataSize. The decompress materializes the full
uncompressed slice via bytes.Buffer.ReadFrom inside util.GunzipStream;
for a 64 MiB chunk that's a ~128 MiB heap spike per call (geometric
grow). On 6-way concurrent UploadPartCopy the spike dominated the
remaining heap profile after #9420/#9421/#9422/#9424/#9425.
When no Content-MD5 verification is requested the uncompressed bytes
aren't needed — only the length is. Stream the gunzip through
io.Discard and count: the pooled gzip.Reader's working set replaces
the materialized slice.
Unlike the previous attempt in #9426 the size still comes from the
real bytes, not from a client-set header.
TotalAlloc per call, 4 MiB uncompressed body:
materialize (was, still runs when MD5 is set): ~16.8 MiB
stream-count (no MD5): ~28 KiB
Refs #6541, #9426 (reverted in #9432).
The same-host gRPC fast path registered /tmp/...sock paths and dialed
them with net.Listen("unix", ...) / net.Dial("unix", ...). Those paths
are POSIX-only, so on Windows the listener failed at startup and every
local gRPC call routed through the registered port lost its transport.
Gate RegisterLocalGrpcSocket to return early on Windows. ServeGrpcOnLocalSocket
and resolveLocalGrpcSocket already short-circuit when no socket is registered,
so all same-host RPCs fall back to TCP without touching any callsite.
Reverts #9426. The header had the volume server record OriginalDataSize
from a value set by the multipart upstream — a client-controlled
metadata field. On a volume server that isn't JWT-protected, a caller
can lie and the needle stores the lie; bounds-checking the value
doesn't change the trust shape, only the magnitude of the lie. Derive
the size from the bytes again.
The optimization only fired on multipart Content-Encoding: gzip parts
(the s3 chunk-copy fast path), a narrow case that doesn't justify the
trust dependency. A future change can attack the same heap profile by
stream-decompressing to count bytes instead of materializing the
uncompressed slice — no client-trust surface.
Refs https://github.com/seaweedfs/seaweedfs/pull/9426#issuecomment-4417862793
Dispatch Tick / Cursor Checkpoint Tick / Engine Refresh / Bootstrap Re-walk
are internal terms — operators tuning the form had to read the descriptions
to guess what each field meant. Renames the visible labels and the section
blurb; underlying field names are unchanged so stored configs still load.
* feat(volume): X-Seaweedfs-Original-Size hint skips redundant gunzip
The full-chunk gzip pass-through (#9425) fixed source-volume
decompression but moved the cost to the destination volume:
parseUpload still ran util.DecompressData on the forwarded gzipped
bytes, just to learn the uncompressed length so it could record
OriginalDataSize in the needle metadata. For 6-way concurrent 64 MiB
UploadPartCopy that decompress-and-discard pass dominated the
remaining heap profile after the streaming chain landed (~297 MiB
inuse via bytes.Buffer.ReadFrom inside util.GunzipStream).
Add an X-Seaweedfs-Original-Size header on the multipart part. When
the upstream sets it (the s3 chunk-copy fast path always knows the
uncompressed size — it's the source chunk's logical size) and no
Content-MD5 verification is requested (which would require
decompressed bytes to compute against), parseUpload uses the hint
directly and skips the decompress.
Header is X-* prefixed (not Seaweed-*) so it doesn't get auto-stored
as a needle pair by PairNamePrefix.
Backward compatible:
- old s3 servers don't set the header, parseUpload decompresses as
before
- new s3 servers talking to old volumes: header is ignored, volume
decompresses
- bad header values (non-numeric, negative, garbage) fall back to the
existing decompress path
End-to-end repro impact (512 MiB src, 6 parallel UploadPartCopy,
post-#9420/#9421/#9422/#9424/#9425 baseline):
RSS, round 2: 1149 MiB → 594 MiB
heap inuse_space: 545 MiB → 349 MiB
HeapSys: 1.35 GiB → 777 MiB
TotalAlloc cum: ~9 GiB → 3.5 GiB
Total reduction from pre-#9420 baseline: 3134 → 594 MiB (-81%).
Test exercises the four matrix corners (hint+no-MD5,
hint+part-MD5, hint+req-MD5, no-hint, garbage-hint) and bounds
allocation per case so a regression that re-introduces the
unconditional decompress fails the hint-present-no-MD5 case.
* review: bound X-Seaweedfs-Original-Size by sizeLimit and uint32
CodeQL on PR 9426 traced a new taint flow: the strconv.Atoi(hint)
value flows into pu.OriginalDataSize -> originalSize -> the existing
uint32(originalSize) cast in volume_server_handlers_write.go:73. The
cast was always there but its input was previously bounded by the
ParseUpload read path (capped at sizeLimit). Adding a user-controlled
hint bypassed that bound, so a malicious header could overflow the
uint32 silently.
Bound the hint at parse time by sizeLimit (the largest needle this
volume will accept anyway) and by math.MaxUint32 (belt-and-suspenders
in case sizeLimit is configured > 4 GiB).
Building on the io.Pipe streaming chunk copy: when a copy operation
covers an entire source chunk (the common case for Harbor's
part-size = chunk-size assemble pattern), ask the source volume for
compressed bytes via Accept-Encoding: gzip and forward them to the
destination as-is.
This trades a Range fetch (where the volume decompresses the chunk
internally to satisfy the byte range) for a full-chunk fetch that
returns whatever wire bytes the chunk is stored as. For gzipped
chunks the source volume avoids the decompression entirely; we never
allocate a chunk-sized decompress buffer.
Implementation: build the source GET directly instead of going
through ReadUrlAsStream, because that helper auto-decompresses gzip
responses (which would defeat the point). Trust the response's
Content-Encoding header over caller hints — for partial ranges the
volume always returns raw bytes regardless of how the chunk is
stored, so labeling those as gzip would corrupt subsequent reads.
End-to-end repro impact (512 MiB src, 6 parallel UploadPartCopy):
+ #9420/#9421/#9422 : 2236 MiB
+ io.Pipe streaming : 1521 MiB
+ this commit : 1149 MiB (round 2 RSS, perfectly flat)
Round 3 now completes (was hitting volume-full before, since
chunks took up uncompressed space on disk; we now store the gzipped
chunks the volume gives us, which fit in the test's 8 GiB volume
budget).
Heap inuse_space (after force GC):
before all: ~1.5 GiB
this PR: 266 MiB
Volume-side bytes.Buffer.ReadFrom inuse:
before: 611 MiB
streaming: 571 MiB
this PR: 297 MiB (now in destination-volume parseUpload's
size-hint decompression — separate
optimization opportunity for a hint header)
* fix: cap pool retention so chunk-copy buffers don't hoard memory
Two pool-retention sites kept the runaway-RSS pattern in #6541 visible
even after #9420 and #9421:
* weed/util/buffer_pool: SyncPoolPutBuffer dropped a buffer back into
sync.Pool regardless of how big it had grown. After a 64 MiB chunk
upload through volume.PostHandler -> needle.ParseUpload, the pool
hoarded a 64 MiB byte array per cached entry for the rest of the
process's lifetime. Cap retention at 4 MiB; oversized buffers are
dropped so GC can reclaim the backing array.
* weed/s3api/...copy.go: uploadChunkData left UploadOption.BytesBuffer
unset, so operation.upload_content fell back to the package-global
valyala/bytebufferpool. That pool also retains high-water buffers
forever, and concurrent UploadPartCopy filled it with one chunk-sized
buffer per concurrent upload. Provide a fresh per-call bytes.Buffer
pre-sized to chunk + multipart framing; it's GC'd as soon as the
upload returns.
Tests:
- weed/util/buffer_pool/sync_pool_test.go: pin the cap (oversized
buffers don't round-trip), the inverse (right-sized buffers do), and
nil-safety.
- weed/s3api/...copy_chunk_upload_test.go: extract newChunkUploadOption
and pin that BytesBuffer is always non-nil and pre-sized, and that
each call gets a distinct buffer.
* feat(s3api): stream chunk copy via io.Pipe to cut peak working set
Final piece for #6541. The buffered chunk-copy path holds two
chunk-sized buffers per copy in flight (download buffer + multipart-
encoded upload buffer). Under concurrent UploadPartCopy that put a
floor on RSS at concurrency × 2 × chunk_size — about 768 MiB for the
6-way / 64 MiB Harbor-style assemble repro, even after the previous
pool/retention fixes.
Replace the buffered path with an io.Pipe between the source GET and
the destination POST: ReadUrlAsStream pumps data into the pipe via a
multipart.Writer, the http.Client reads from the pipe end and POSTs
the body. In-flight per copy is now ~32 KiB (pipe hand-off + http
buffers), regardless of chunk size.
The streaming path is gated by canStreamCopyChunk: only used when no
in-transit transformation is needed (no per-chunk CipherKey, no SSE).
SSE-C / SSE-KMS / SSE-S3 paths still go through the buffered path,
which already handles re-encryption correctly.
Benchmarks (Apple M4, httptest source/dest, B/op = bytes per copy):
Buffered 1 MiB: 6.0 MB B/op, 443 MB/s
Streamed 1 MiB: 374 KB B/op, 727 MB/s
Buffered 8 MiB: 56 MB B/op, 559 MB/s
Streamed 8 MiB: 379 KB B/op, 1138 MB/s
Buffered 64 MiB: 455 MB B/op, 718 MB/s
Streamed 64 MiB: 304 KB B/op, 1387 MB/s
End-to-end repro (512 MiB src, 6 parallel UploadPartCopy):
pre-#9420 RSS round 2: 3134 MiB
+ #9420/#9421/#9422 : 2236 MiB
+ this PR : 1521 MiB
heap inuse_space : 350 MiB (was 1422 / 1187 MiB)
HeapSys (MemStats) : 1.74 GiB (was 2.49 GiB)
* review: surface shouldRetry, add int32 guard, drop redundant drains
Address review on PR 9424:
* coderabbit (HIGH, line 122): ReadUrlAsStream can set shouldRetry=true
with readErr=nil. Before this fix, that fell through to mw.Close()
and the destination POST succeeded against a possibly-truncated
multipart body. Mirror downloadChunkData's explicit check and
surface shouldRetry as a producer error so the dst POST aborts.
* gemini (line 98): chunk size is int64 but ReadUrlAsStream takes int.
Reject sizes above MaxInt32 up front so the int(size) cast can't
truncate negative on 32-bit platforms — same guard downloadChunkData
uses.
* gemini (line 151): util_http.CloseResponse already drains the body
(io.Copy(io.Discard, ...) inside the helper) before closing, so the
manual io.Copy drains we added are redundant. Drop them.
* review: cancel source GET when destination POST fails
Address coderabbit review (line 165 / second pass on PR 9424): when
the POST leg fails or returns an error status, closing pipeReader
only fails the producer's *writes*. ReadUrlAsStream's own read loop
runs under the parent ctx, so it keeps draining the source body in
the background until EOF — wasting source-volume bandwidth and CPU
on a copy that's already failed.
Wrap streamCopyChunkRange in a child context cancelled on return.
ReadUrlAsStream checks ctx.Done() per 256 KiB tick, so the in-flight
read aborts on the next iteration once the function returns. The POST
also moves to streamCtx so the in-flight request can be cancelled the
same way if the producer fails first.
Defer-cancel runs after both legs return, so the success path still
sends EOF cleanly through pipeWriter.Close before cancellation.
Two pool-retention sites kept the runaway-RSS pattern in #6541 visible
even after #9420 and #9421:
* weed/util/buffer_pool: SyncPoolPutBuffer dropped a buffer back into
sync.Pool regardless of how big it had grown. After a 64 MiB chunk
upload through volume.PostHandler -> needle.ParseUpload, the pool
hoarded a 64 MiB byte array per cached entry for the rest of the
process's lifetime. Cap retention at 4 MiB; oversized buffers are
dropped so GC can reclaim the backing array.
* weed/s3api/...copy.go: uploadChunkData left UploadOption.BytesBuffer
unset, so operation.upload_content fell back to the package-global
valyala/bytebufferpool. That pool also retains high-water buffers
forever, and concurrent UploadPartCopy filled it with one chunk-sized
buffer per concurrent upload. Provide a fresh per-call bytes.Buffer
pre-sized to chunk + multipart framing; it's GC'd as soon as the
upload returns.
Tests:
- weed/util/buffer_pool/sync_pool_test.go: pin the cap (oversized
buffers don't round-trip), the inverse (right-sized buffers do), and
nil-safety.
- weed/s3api/...copy_chunk_upload_test.go: extract newChunkUploadOption
and pin that BytesBuffer is always non-nil and pre-sized, and that
each call gets a distinct buffer.
* fix(volume): pre-size ParseUpload buffer to request ContentLength
The volume server's PostHandler reads the multipart upload body via
bytes.Buffer.ReadFrom inside parseUpload. The buffer comes from a
sync.Pool and may have cap=0 when the pool dropped the prior entry,
which makes ReadFrom geometric-grow on each chunk: a 64 MiB upload
allocates roughly 1+2+4+...+64 ≈ 128 MiB just to receive the body.
Under concurrent uploads (every s3 chunk-copy lands here on the
destination volume) this is one of the main contributors to the
runaway-RSS pattern in #6541 — pprof shows ~458 MiB cum in
parseUpload's bytes.Buffer.ReadFrom under Harbor-style assemble load.
Grow the buffer once up front, bounded by the existing sizeLimit so
a misreported Content-Length can't over-allocate. The receive then
fills in place.
Add a regression test that drives ParseUpload with a 16 MiB multipart
body and bounds TotalAlloc at 1.5x the chunk size (pre-fix measures
~4x, so the bound trips deterministically).
* fix(volume): guard ParseUpload pre-grow against int overflow on 32-bit
Address PR review feedback: r.ContentLength is int64, and on 32-bit
platforms int is 32 bits wide, so int(r.ContentLength) for a value above
math.MaxInt32 wraps negative and bytes.Buffer.Grow panics with
"bytes.Buffer.Grow: negative count". Skip the pre-grow optimization in
that range; the existing geometric-grow path remains correct, just
slightly more allocator pressure for that one call.
64-bit platforms (math.MaxInt == math.MaxInt64) are unaffected — the
guard only kicks in for 32-bit builds with very large sizeLimit.
* fix(volume): cap ParseUpload pre-grow at 4 MiB to bound DoS surface
Address PR review: pre-growing the receive buffer to r.ContentLength
trusts the header before any body bytes arrive. A bad header or slow /
idle client could declare a large Content-Length up to sizeLimit (256
MiB by default for volume writes) and force per-request preallocation
without sending data, turning many concurrent slow connections into
avoidable memory pressure.
Cap eager pre-grow at maxEagerPreGrow (4 MiB). Larger uploads still
benefit from the higher starting cap and fall back to ReadFrom's grow
path for the remainder. Per-request waste from a misreported
Content-Length is now bounded at 4 MiB regardless of sizeLimit.
Extract the policy as eagerPreGrow so the unit test can exercise the
gates structurally — replaces the prior TotalAlloc bound (which became
uninformative once savings were capped at 4 MiB).
* fix(s3api): cap copy-chunk receive buffer to avoid append-grow blowup
downloadChunkData accumulated the streamed chunk into a nil []byte via
`chunkData = append(chunkData, data...)`. ReadUrlAsStream pumps in 256 KiB
ticks, so a 64 MiB chunk grew the slice geometrically (256K → 512K →
1M → ... → 64M), allocating ~2x the chunk size for every transferred
byte. Combined with the 4-way per-request concurrency and any number of
in-flight UploadPartCopy calls (Harbor multipart assemble), this is what
produces the runaway-RSS pattern reported in #6541.
Pre-size the receive buffer to the known sizeInt so the callback fills
in place. Add a regression test that downloads a 16 MiB chunk through
httptest and asserts TotalAlloc stays under 1.5x the chunk size — the
pre-fix code allocates ~5x and trips the bound.
Local repro (weed 4.23, 6 parallel UploadPartCopy on a 512 MiB source):
before: baseline 96 MiB → peak 3124 MiB, never reclaimed
pprof: 650 MiB inuse in bytes.growSlice + 461 MiB in
downloadChunkData.func1
* test(s3api): assert downloaded chunk content matches payload
Address PR review feedback: the allocation-bound check alone would still
pass if a future regression silently truncated or corrupted the chunk.
Compare the returned bytes against the source payload (after the
TotalAlloc measurement window so bytes.Equal doesn't pollute it).
* test(s3/lifecycle/engine): pin delay-group dedup across buckets
Compile a 100-bucket × 5-rule snapshot where the five Days values
include duplicates (1, 1, 7, 7, 30) and assert:
- snap.actions has 500 entries — every (bucket, rule) compiles to its
own ActionKey, no collapse.
- snap.originalDelayGroups has exactly 3 entries — the routing index
is keyed by Delay, so same-day rules across all buckets share a
group. This is the property that lets the dispatcher index by
delay group rather than per-rule.
- Per-group key count = (rules with that day) × buckets, so every
action is reachable from its group entry.
* docs(s3/lifecycle): reflect shipped reader, obsolete Phase 6
The reader didn't end up building per-filer-shard cursors,
RetainedLogRangePerShard / EarliestRetainedPositionPerShard probes,
tail_drained_streams GC, or CollectLogFileRefs heap-merge. The
filer's SubscribeMetadata already aggregates persisted + in-memory
logs across peer filers, so a single global cursor on a single
subscription is sufficient.
Mark the per-shard architecture and lost-log GC pseudocode as
implementation-note + obsoleted, rewrite Phase 6 to call out what
was descoped and why, point readers at the narrow ResumeFromDiskError
auto-degrade follow-up that is the only residual gap, and update
Layer 4 to note no multi-filer test harness is needed.
* docs(s3/lifecycle): drop stale per-shard cursor wording in Phase 3
The "one sweep per delay group" bullet still described
last_processed_original / last_processed_predicate as per-shard maps,
contradicting the implementation note added a few lines above. The
shipped reader stores one global (ts_ns, offset) position per delay
group; rewrite the bullet to match.
Compile a 100-bucket × 5-rule snapshot where the five Days values
include duplicates (1, 1, 7, 7, 30) and assert:
- snap.actions has 500 entries — every (bucket, rule) compiles to its
own ActionKey, no collapse.
- snap.originalDelayGroups has exactly 3 entries — the routing index
is keyed by Delay, so same-day rules across all buckets share a
group. This is the property that lets the dispatcher index by
delay group rather than per-rule.
- Per-group key count = (rules with that day) × buckets, so every
action is reachable from its group entry.
* test(s3/lifecycle): integration coverage for versioning + filters
First integration-test bundle building on the existing single-test
backdating harness. Each scenario follows the same shape: create
bucket, set lifecycle, PUT object, backdate mtime via filer
UpdateEntry, run the shell command for one shard sweep, assert
S3-side state.
Five new tests:
- TestLifecycleVersionedBucketCreatesDeleteMarker: Expiration on a
versioned bucket must produce a delete marker (latest after worker
runs is a marker) AND keep the original version directly addressable
by versionId. ListObjectVersions confirms IsLatest=true on the
marker.
- TestLifecycleNoncurrentVersionExpiration: NoncurrentVersionExpiration
fires only on demoted versions. PUT v1, PUT v2 (so v1 → noncurrent),
backdate v1, run worker. v1 must be gone, v2 still current.
- TestLifecycleExpiredDeleteMarkerCleanup: combined rule (noncurrent +
expired-delete-marker) cleans up a sole-survivor marker. PUT v1,
DELETE (creates marker), backdate both, run worker. Every version
AND marker must be gone for the key.
- TestLifecycleDisabledRuleSkipsObject: rule with Status=Disabled
must not produce dispatches even on a backdated match. Negative
test for the engine's enabled-status gate.
- TestLifecycleTagFilter: rule with And{Prefix, Tag} only matches
objects carrying the tag. Two backdated objects (one tagged, one
not) — only the tagged one is removed.
Helpers extracted to keep each test focused: putVersioningEnabled,
putNoncurrentExpirationLifecycle, putExpiredDeleteMarkerLifecycle,
backdateVersionedMtime (ages a specific .versions/v_<id> entry),
runLifecycleShard (one-shot shell invocation with FATAL guard).
* test(s3/lifecycle): tighten noncurrent expiration diagnostics
Local run showed TestLifecycleNoncurrentVersionExpiration failing
with a bare 404 on HEAD(latest), not enough to tell whether v2 was
deleted, the bare-key pointer was removed, or a delete marker was
synthesized. Strengthen the test to:
- HEAD by versionId=v2 first, so we pin "v2 file still on disk"
separately from "the latest pointer resolves to v2"
- on HEAD(latest) failure, log ListObjectVersions output (versions +
markers, with IsLatest) so the next failure shows which side the
bug is on rather than just NotFound
* test(s3/lifecycle): integration coverage for AbortIncompleteMultipartUpload
Exercises the lifecycleAbortMPU handler path that the prefix-based
expiration tests can't reach — routing keys off of .uploads/<id>/
directory events, not regular object events, and the dispatcher uses
a different RPC path (rm on the .uploads/<id>/ folder).
Setup: AbortIncompleteMultipartUpload rule with DaysAfterInitiation=1,
CreateMultipartUpload, UploadPart (so the directory carries the
right shape), backdate the .uploads/<uploadID>/ directory entry 30
days, run the worker. The upload must drop out of
ListMultipartUploads.
Helpers added: putAbortMPULifecycle, backdateUploadDir.
* test(s3/lifecycle): integration coverage for NewerNoncurrentVersions
NewerNoncurrentVersions=N keeps the N most recent noncurrent versions
and expires the rest. Distinct from per-version NoncurrentDays —
depends on per-version rank, not just per-version age — and routes
through routePointerTransition's "needs full expansion" path.
Setup: PUT v1, v2, v3, v4 on a versioned bucket (v4 current; v1-v3
noncurrent), backdate v1+v2+v3 so all satisfy the NoncurrentDays>=1
floor, run the worker. Expect v1+v2 expired (older noncurrent),
v3 (newest noncurrent within keep=1) and v4 (current) preserved.
Helper added: putNewerNoncurrentLifecycle.
* test(s3/lifecycle): integration coverage for suspended-versioning Expiration
Suspended versioning takes a distinct code path in lifecycleDispatch:
the VersioningSuspended branch first deletes the null version (via
deleteSpecificObjectVersion(versionId="null")) and then writes a
fresh delete marker on top. Other branches (Enabled → only writes a
marker; Off → straight rm) miss this two-step.
Setup: enable versioning, PUT v1 (real versionId), suspend
versioning, PUT again (creates the null version, demotes v1 to
noncurrent), set the Expiration rule, backdate the null at the
bare path. Expect: latest is now a fresh delete marker, the
"null" version is gone from ListObjectVersions, and v1 (noncurrent
under Enabled) still addressable directly — suspended Expiration
must only touch the null, not other versions.
Helper added: putVersioningSuspended.
* test(s3/lifecycle): integration coverage for multi-bucket sweep
A single shell-driven shard sweep must process every bucket carrying
lifecycle config, not just the first one alphabetically. Pinned
because the scheduler iterates the buckets directory and a regression
that returns early after the first match would silently disable
lifecycle for every later bucket.
Two buckets, each with their own prefix-expiration rule and a
backdated object. Both must be expired after the same sweep.
* test(s3/lifecycle): integration coverage for ObjectSizeGreaterThan filter
ObjectSizeGreaterThan is a strict > gate (filterAllows uses
ev.Size <= rule.FilterSizeGreaterThan to reject). Pinned at the
boundary: an object whose size equals the threshold must remain;
only an object strictly larger expires. Catches a > vs >= flip.
Two backdated objects on the same prefix, sizes 100 and 150 with
threshold=100 — boundary survives, larger expires.
* test(s3/lifecycle): scrub bucket lifecycle config + versions on cleanup
Tests share one weed mini server. Two pollution modes were producing
order-dependent failures:
- A later test's shard sweep would still load the prior test's
lifecycle config (the worker reads every bucket's XML from filer
state, and DeleteBucket alone doesn't drop lifecycle config
cleanly on this codebase).
- Versioned-bucket tests left versions + delete markers behind that
ListObjectsV2 can't see, so the existing best-effort empty-then-
delete didn't actually empty those buckets.
- The AbortMPU test intentionally leaves an in-flight upload; without
an explicit AbortMultipartUpload the bucket DELETE hits NotEmpty.
Cleanup now runs DeleteBucketLifecycle, ListObjectVersions →
DeleteObject(versionId), ListObjectsV2 → DeleteObject (catches what
ListObjectVersions missed), ListMultipartUploads → AbortMultipartUpload,
then DeleteBucket. Best-effort throughout so a half-torn-down bucket
doesn't fail the cleanup chain.
* test(s3/lifecycle): backdate both versions for NoncurrentDays clock
Per codex review: NoncurrentDays is clocked from the SUCCESSOR
version's mtime (when the displaced version became noncurrent), not
from the displaced version's own mtime. Backdating only v1 left the
clock (v2's mtime) at "now" and the rule never fired — the test was
wrong, not the production path.
Backdate v1=31d and v2=30d so v1 sits past the 1-day threshold
relative to v2, the noncurrent rule fires, and v2 stays current.
* test(s3/lifecycle): assert specific NotFound on multi-bucket deletion
Per codex review: TestLifecycleMultipleBucketsInOneSweep treated any
HeadObject error as "deleted", which lets a transport failure or
dead endpoint mask a real bug. Recognize NoSuchKey/NotFound/HTTP-404
specifically via a small isS3NotFound helper so the assertion
actually proves deletion happened, not just that the call broke.
* test(s3/lifecycle): gofmt size-filter test
* test(s3/lifecycle): integration coverage for Object Lock skip
Object Lock retention must override the lifecycle rule. The handler's
enforceObjectLockProtections check (s3api_internal_lifecycle.go:47)
returns an error when retention is active; the dispatcher then
classifies the outcome as SKIPPED_OBJECT_LOCK and the object stays.
No existing integration test reaches that outcome.
Setup: bucket created with ObjectLockEnabledForBucket=true, expiration
rule on prefix "lock/", two backdated objects under the same prefix —
one with GOVERNANCE retention until 1h from now, one without. After
the worker runs, the unlocked object expires (positive control); the
locked one survives.
Custom cleanup uses BypassGovernanceRetention so the test can drop
the locked version when the test finishes — otherwise the retention
window keeps the bucket from being deleted.
* test(s3/lifecycle): integration coverage for config update between sweeps
An operator changes the lifecycle rule between two shell-driven
sweeps. The second sweep must respect the NEW rule, not a cached
copy of the old one. Each runLifecycleShard invocation spawns a
fresh weed shell subprocess, so cached engine state from a previous
sweep doesn't persist — but a regression that caches rules across
PutBucketLifecycleConfiguration calls within the S3 server itself
would still surface here.
Sweep 1: rule prefix="first/", PUT + backdate firstKey, run worker
→ firstKey expires.
Update rule to prefix="second/", PUT + backdate secondKey AND a
new key under the OLD prefix ("first/post-update.txt"). Sweep 2
must expire only the second-prefix object; the post-update old-
prefix one must survive — config replacement, not merge.
* test(s3/lifecycle): integration coverage for ExpirationDate (past)
Rules with Expiration{Date: <past>} route through ScanAtDate in the
engine (decideMode's ActionKindExpirationDate case) — a separate
compile + dispatch branch from the EventDriven delay-group path the
Days-based tests exercise.
Past date + in-prefix object → must expire. Out-of-prefix object →
must remain. Object also backdated as defense-in-depth so the
assertion doesn't depend on whether the dispatcher consults
MinTriggerAge for date kinds.
* test(s3/lifecycle): integration coverage for bootstrap walk on existing objects
Production scenario: operator enables lifecycle on a bucket that
already holds objects from before the policy. The worker must
discover them via the bootstrap walk (BucketBootstrapper) — there
were no meta-log events to observe because the objects predate the
rule. Without the bootstrap path, only NEW writes would ever match.
Setup: PUT 5 objects (no lifecycle config yet) + 1 out-of-prefix
survivor, backdate all, THEN set the Expiration rule, run the
worker. Every in-prefix pre-existing object must be expired; the
out-of-prefix one must remain.
* test(s3/lifecycle): integration coverage for DeleteBucketLifecycle stops dispatching
Operator UX: after DeleteBucketLifecycle, the worker must observe the
removal on the next sweep and stop expiring objects under the now-gone
rule. A regression that caches old configs across
PutBucketLifecycleConfiguration → DeleteBucketLifecycle would keep
silently dropping objects.
Setup: positive control (rule active, backdated obj expires) →
DeleteBucketLifecycle → PUT + backdate a fresh object → second
sweep. The fresh object must remain.
* test(s3/lifecycle): integration coverage for empty bucket sweep no-op
A bucket carrying lifecycle config but no objects must produce a
successful sweep — no hangs, no errors, no dispatches. Pinned
because the bootstrap walker iterates bucket directories, and an
empty directory is a corner of that traversal that's easy to break
(slice-bounds bug on the first listing returning zero entries).
Asserts: worker logs "loaded lifecycle for" and "shards 0-15
complete", no FATAL output, bucket still exists after the sweep.
* test(s3/lifecycle): fix Object Lock backdate path + skip unwired ScanAtDate
ObjectLock: enabling Object Lock on a bucket implicitly enables
versioning, so PUT objects land at .versions/v_<id>, not at the bare
key. The test was calling backdateMtime (bare path) and failing in
the helper with "filer: no entry is found". Switch to
backdateVersionedMtime with the versionId returned by PutObject.
ExpirationDate: ScanAtDate dispatch path isn't wired to the run-shard
shell command yet — the bootstrap walker explicitly skips actions in
ModeScanAtDate (walker.go:141 says "SCAN_AT_DATE runs its own date-
triggered bootstrap" but no such bootstrap exists in the scheduler or
shell). Skip with a t.Skip + explanation so the test activates the
moment the date-triggered path lands.
* fix(s3/lifecycle): wire ExpirationDate dispatch through bootstrap walker
The walker explicitly skipped ModeScanAtDate actions on the comment
"SCAN_AT_DATE runs its own date-triggered bootstrap" — but no such
bootstrap exists in the scheduler or shell layer. The result: rules
with Expiration{Date: ...} compiled correctly, populated the
snapshot's dateActions map, and were never dispatched.
ExpirationDate is silently a no-op in production.
EvaluateAction already handles ActionKindExpirationDate correctly
(rejects when now.Before(rule.ExpirationDate), otherwise emits
ActionDeleteObject). The walker just needed to fall through instead
of skipping. Pre-date walks become no-ops via EvaluateAction's date
check; post-date walks expire eligible objects.
Un-skip TestLifecycleExpirationDateInThePast — it now exercises the
fixed path end-to-end.
* test(s3/lifecycle): integration coverage for multiple rules per bucket
A single bucket carries two independent Expiration rules with disjoint
prefix filters and different Days thresholds. Each rule must fire
only on its prefix; objects outside both prefixes must survive.
Pinned because Compile builds one CompiledAction per rule per kind
all sharing the same bucket index — a bug that lets one rule's
prefix or threshold leak into another (e.g. last-write-wins on a
shared map) would silently expire wrong objects.
Setup: rule A with prefix=logs/ Days=1, rule B with prefix=tmp/
Days=7. Three backdated objects: logs/access.log, tmp/scratch.bin,
data/keep.bin. After the worker runs, logs/ + tmp/ are gone;
data/ — outside both rule prefixes — survives.
* fix(s3/lifecycle): mark ScanAtDate actions active in Compile
Two layers were silently filtering ScanAtDate actions out of routing:
the walker's mode skip (fixed in e785f59d6) and Compile only marking
ModeEventDriven actions active. MatchPath / MatchOriginalWrite both
require IsActive() to emit a key, so a ScanAtDate action that's never
marked active never reaches a dispatch path even after the walker
falls through.
ScanAtDate's only dispatch path is the bootstrap walk's MatchPath
call — there's no bootstrap-completion rendezvous to wait on. Make
the active flag include ModeScanAtDate alongside the
EventDriven+BootstrapComplete combination.
ExpirationDate-based rules now actually fire end-to-end. The
TestLifecycleExpirationDateInThePast integration test exercises this.
* fix(s3/lifecycle): route date kinds via ComputeDueAt
ExpirationDate has MinTriggerAge=0, so router computed
dueTime = info.ModTime + 0 = info.ModTime. For a backdated entry
that mtime is BEFORE rule.ExpirationDate, so EvaluateAction's
now.Before(rule.ExpirationDate) check returned ActionNone and the
date rule never fired through the event-driven path.
ComputeDueAt already knows the per-kind shape — rule.ExpirationDate
for date kinds, ModTime+Days for the rest — so use it as the
single source of truth for dueTime in Route's main loop.
* test(s3/lifecycle): pin bootstrap walker date dispatch
The original TestWalk_DateActionsSkipped pinned the pre-e785f59d6
behavior that the regular walker skipped ExpirationDate. That
walker was rewired to fire date rules whose date has passed (the
SCAN_AT_DATE bootstrap was never wired); update the test to match.
Split into two: post-date entries dispatch, pre-date entries don't.
* test(s3/lifecycle): drop unused putExpiredDeleteMarkerLifecycle
The helper was never called — TestLifecycleExpiredDeleteMarkerCleanup
constructs a combined noncurrent + expired-marker rule inline, which
the helper doesn't cover. The blank-assignment workaround was just
hiding dead code; remove both.
* test(s3/lifecycle): tighten HeadObject termination check to typed not-found
Generic err != nil also passes on transport/auth/timeouts, letting
the test go green without proving the lifecycle action actually
fired. Switch the three Eventuallyf HeadObject predicates to
isS3NotFound, matching the pattern already in the multi-bucket and
expiration-date tests.
* test(s3/lifecycle): guard ListObjectVersions diagnostic against nil
When ListObjectVersions errors, listOut is nil and the diagnostic
log path panics on listOut.Versions before the real assertion fires.
Branch on (listErr != nil || listOut == nil) so the failure log is
robust whatever ListObjectVersions returned.
* refactor(s3/lifecycle): extract entryUsesMetadataOnlyDelete predicate
The metadata-only delete decision (entry.Attributes.TtlSec > 0) was
inlined in lifecycleDispatch with no direct test. Lift it into a
named predicate with the rationale comment moved onto the function
and pin the four edge cases: nil entry, nil attributes, TtlSec=0,
TtlSec>0, plus a defensive check that TtlSec<0 doesn't flip the
path on.
* test(s3/lifecycle): integration coverage for versioning + filters
First integration-test bundle building on the existing single-test
backdating harness. Each scenario follows the same shape: create
bucket, set lifecycle, PUT object, backdate mtime via filer
UpdateEntry, run the shell command for one shard sweep, assert
S3-side state.
Five new tests:
- TestLifecycleVersionedBucketCreatesDeleteMarker: Expiration on a
versioned bucket must produce a delete marker (latest after worker
runs is a marker) AND keep the original version directly addressable
by versionId. ListObjectVersions confirms IsLatest=true on the
marker.
- TestLifecycleNoncurrentVersionExpiration: NoncurrentVersionExpiration
fires only on demoted versions. PUT v1, PUT v2 (so v1 → noncurrent),
backdate v1, run worker. v1 must be gone, v2 still current.
- TestLifecycleExpiredDeleteMarkerCleanup: combined rule (noncurrent +
expired-delete-marker) cleans up a sole-survivor marker. PUT v1,
DELETE (creates marker), backdate both, run worker. Every version
AND marker must be gone for the key.
- TestLifecycleDisabledRuleSkipsObject: rule with Status=Disabled
must not produce dispatches even on a backdated match. Negative
test for the engine's enabled-status gate.
- TestLifecycleTagFilter: rule with And{Prefix, Tag} only matches
objects carrying the tag. Two backdated objects (one tagged, one
not) — only the tagged one is removed.
Helpers extracted to keep each test focused: putVersioningEnabled,
putNoncurrentExpirationLifecycle, putExpiredDeleteMarkerLifecycle,
backdateVersionedMtime (ages a specific .versions/v_<id> entry),
runLifecycleShard (one-shot shell invocation with FATAL guard).
* test(s3/lifecycle): tighten noncurrent expiration diagnostics
Local run showed TestLifecycleNoncurrentVersionExpiration failing
with a bare 404 on HEAD(latest), not enough to tell whether v2 was
deleted, the bare-key pointer was removed, or a delete marker was
synthesized. Strengthen the test to:
- HEAD by versionId=v2 first, so we pin "v2 file still on disk"
separately from "the latest pointer resolves to v2"
- on HEAD(latest) failure, log ListObjectVersions output (versions +
markers, with IsLatest) so the next failure shows which side the
bug is on rather than just NotFound
* test(s3/lifecycle): integration coverage for AbortIncompleteMultipartUpload
Exercises the lifecycleAbortMPU handler path that the prefix-based
expiration tests can't reach — routing keys off of .uploads/<id>/
directory events, not regular object events, and the dispatcher uses
a different RPC path (rm on the .uploads/<id>/ folder).
Setup: AbortIncompleteMultipartUpload rule with DaysAfterInitiation=1,
CreateMultipartUpload, UploadPart (so the directory carries the
right shape), backdate the .uploads/<uploadID>/ directory entry 30
days, run the worker. The upload must drop out of
ListMultipartUploads.
Helpers added: putAbortMPULifecycle, backdateUploadDir.
* test(s3/lifecycle): integration coverage for NewerNoncurrentVersions
NewerNoncurrentVersions=N keeps the N most recent noncurrent versions
and expires the rest. Distinct from per-version NoncurrentDays —
depends on per-version rank, not just per-version age — and routes
through routePointerTransition's "needs full expansion" path.
Setup: PUT v1, v2, v3, v4 on a versioned bucket (v4 current; v1-v3
noncurrent), backdate v1+v2+v3 so all satisfy the NoncurrentDays>=1
floor, run the worker. Expect v1+v2 expired (older noncurrent),
v3 (newest noncurrent within keep=1) and v4 (current) preserved.
Helper added: putNewerNoncurrentLifecycle.
* test(s3/lifecycle): integration coverage for suspended-versioning Expiration
Suspended versioning takes a distinct code path in lifecycleDispatch:
the VersioningSuspended branch first deletes the null version (via
deleteSpecificObjectVersion(versionId="null")) and then writes a
fresh delete marker on top. Other branches (Enabled → only writes a
marker; Off → straight rm) miss this two-step.
Setup: enable versioning, PUT v1 (real versionId), suspend
versioning, PUT again (creates the null version, demotes v1 to
noncurrent), set the Expiration rule, backdate the null at the
bare path. Expect: latest is now a fresh delete marker, the
"null" version is gone from ListObjectVersions, and v1 (noncurrent
under Enabled) still addressable directly — suspended Expiration
must only touch the null, not other versions.
Helper added: putVersioningSuspended.
* test(s3/lifecycle): integration coverage for multi-bucket sweep
A single shell-driven shard sweep must process every bucket carrying
lifecycle config, not just the first one alphabetically. Pinned
because the scheduler iterates the buckets directory and a regression
that returns early after the first match would silently disable
lifecycle for every later bucket.
Two buckets, each with their own prefix-expiration rule and a
backdated object. Both must be expired after the same sweep.
* test(s3/lifecycle): integration coverage for ObjectSizeGreaterThan filter
ObjectSizeGreaterThan is a strict > gate (filterAllows uses
ev.Size <= rule.FilterSizeGreaterThan to reject). Pinned at the
boundary: an object whose size equals the threshold must remain;
only an object strictly larger expires. Catches a > vs >= flip.
Two backdated objects on the same prefix, sizes 100 and 150 with
threshold=100 — boundary survives, larger expires.
* test(s3/lifecycle): scrub bucket lifecycle config + versions on cleanup
Tests share one weed mini server. Two pollution modes were producing
order-dependent failures:
- A later test's shard sweep would still load the prior test's
lifecycle config (the worker reads every bucket's XML from filer
state, and DeleteBucket alone doesn't drop lifecycle config
cleanly on this codebase).
- Versioned-bucket tests left versions + delete markers behind that
ListObjectsV2 can't see, so the existing best-effort empty-then-
delete didn't actually empty those buckets.
- The AbortMPU test intentionally leaves an in-flight upload; without
an explicit AbortMultipartUpload the bucket DELETE hits NotEmpty.
Cleanup now runs DeleteBucketLifecycle, ListObjectVersions →
DeleteObject(versionId), ListObjectsV2 → DeleteObject (catches what
ListObjectVersions missed), ListMultipartUploads → AbortMultipartUpload,
then DeleteBucket. Best-effort throughout so a half-torn-down bucket
doesn't fail the cleanup chain.
* test(s3/lifecycle): backdate both versions for NoncurrentDays clock
Per codex review: NoncurrentDays is clocked from the SUCCESSOR
version's mtime (when the displaced version became noncurrent), not
from the displaced version's own mtime. Backdating only v1 left the
clock (v2's mtime) at "now" and the rule never fired — the test was
wrong, not the production path.
Backdate v1=31d and v2=30d so v1 sits past the 1-day threshold
relative to v2, the noncurrent rule fires, and v2 stays current.
* test(s3/lifecycle): assert specific NotFound on multi-bucket deletion
Per codex review: TestLifecycleMultipleBucketsInOneSweep treated any
HeadObject error as "deleted", which lets a transport failure or
dead endpoint mask a real bug. Recognize NoSuchKey/NotFound/HTTP-404
specifically via a small isS3NotFound helper so the assertion
actually proves deletion happened, not just that the call broke.
* test(s3/lifecycle): gofmt size-filter test
* test(s3/lifecycle): integration coverage for Object Lock skip
Object Lock retention must override the lifecycle rule. The handler's
enforceObjectLockProtections check (s3api_internal_lifecycle.go:47)
returns an error when retention is active; the dispatcher then
classifies the outcome as SKIPPED_OBJECT_LOCK and the object stays.
No existing integration test reaches that outcome.
Setup: bucket created with ObjectLockEnabledForBucket=true, expiration
rule on prefix "lock/", two backdated objects under the same prefix —
one with GOVERNANCE retention until 1h from now, one without. After
the worker runs, the unlocked object expires (positive control); the
locked one survives.
Custom cleanup uses BypassGovernanceRetention so the test can drop
the locked version when the test finishes — otherwise the retention
window keeps the bucket from being deleted.
* test(s3/lifecycle): integration coverage for config update between sweeps
An operator changes the lifecycle rule between two shell-driven
sweeps. The second sweep must respect the NEW rule, not a cached
copy of the old one. Each runLifecycleShard invocation spawns a
fresh weed shell subprocess, so cached engine state from a previous
sweep doesn't persist — but a regression that caches rules across
PutBucketLifecycleConfiguration calls within the S3 server itself
would still surface here.
Sweep 1: rule prefix="first/", PUT + backdate firstKey, run worker
→ firstKey expires.
Update rule to prefix="second/", PUT + backdate secondKey AND a
new key under the OLD prefix ("first/post-update.txt"). Sweep 2
must expire only the second-prefix object; the post-update old-
prefix one must survive — config replacement, not merge.
* test(s3/lifecycle): integration coverage for ExpirationDate (past)
Rules with Expiration{Date: <past>} route through ScanAtDate in the
engine (decideMode's ActionKindExpirationDate case) — a separate
compile + dispatch branch from the EventDriven delay-group path the
Days-based tests exercise.
Past date + in-prefix object → must expire. Out-of-prefix object →
must remain. Object also backdated as defense-in-depth so the
assertion doesn't depend on whether the dispatcher consults
MinTriggerAge for date kinds.
* test(s3/lifecycle): integration coverage for bootstrap walk on existing objects
Production scenario: operator enables lifecycle on a bucket that
already holds objects from before the policy. The worker must
discover them via the bootstrap walk (BucketBootstrapper) — there
were no meta-log events to observe because the objects predate the
rule. Without the bootstrap path, only NEW writes would ever match.
Setup: PUT 5 objects (no lifecycle config yet) + 1 out-of-prefix
survivor, backdate all, THEN set the Expiration rule, run the
worker. Every in-prefix pre-existing object must be expired; the
out-of-prefix one must remain.
* test(s3/lifecycle): integration coverage for DeleteBucketLifecycle stops dispatching
Operator UX: after DeleteBucketLifecycle, the worker must observe the
removal on the next sweep and stop expiring objects under the now-gone
rule. A regression that caches old configs across
PutBucketLifecycleConfiguration → DeleteBucketLifecycle would keep
silently dropping objects.
Setup: positive control (rule active, backdated obj expires) →
DeleteBucketLifecycle → PUT + backdate a fresh object → second
sweep. The fresh object must remain.
* test(s3/lifecycle): integration coverage for empty bucket sweep no-op
A bucket carrying lifecycle config but no objects must produce a
successful sweep — no hangs, no errors, no dispatches. Pinned
because the bootstrap walker iterates bucket directories, and an
empty directory is a corner of that traversal that's easy to break
(slice-bounds bug on the first listing returning zero entries).
Asserts: worker logs "loaded lifecycle for" and "shards 0-15
complete", no FATAL output, bucket still exists after the sweep.
* test(s3/lifecycle): fix Object Lock backdate path + skip unwired ScanAtDate
ObjectLock: enabling Object Lock on a bucket implicitly enables
versioning, so PUT objects land at .versions/v_<id>, not at the bare
key. The test was calling backdateMtime (bare path) and failing in
the helper with "filer: no entry is found". Switch to
backdateVersionedMtime with the versionId returned by PutObject.
ExpirationDate: ScanAtDate dispatch path isn't wired to the run-shard
shell command yet — the bootstrap walker explicitly skips actions in
ModeScanAtDate (walker.go:141 says "SCAN_AT_DATE runs its own date-
triggered bootstrap" but no such bootstrap exists in the scheduler or
shell). Skip with a t.Skip + explanation so the test activates the
moment the date-triggered path lands.
* fix(s3/lifecycle): wire ExpirationDate dispatch through bootstrap walker
The walker explicitly skipped ModeScanAtDate actions on the comment
"SCAN_AT_DATE runs its own date-triggered bootstrap" — but no such
bootstrap exists in the scheduler or shell layer. The result: rules
with Expiration{Date: ...} compiled correctly, populated the
snapshot's dateActions map, and were never dispatched.
ExpirationDate is silently a no-op in production.
EvaluateAction already handles ActionKindExpirationDate correctly
(rejects when now.Before(rule.ExpirationDate), otherwise emits
ActionDeleteObject). The walker just needed to fall through instead
of skipping. Pre-date walks become no-ops via EvaluateAction's date
check; post-date walks expire eligible objects.
Un-skip TestLifecycleExpirationDateInThePast — it now exercises the
fixed path end-to-end.
* test(s3/lifecycle): integration coverage for multiple rules per bucket
A single bucket carries two independent Expiration rules with disjoint
prefix filters and different Days thresholds. Each rule must fire
only on its prefix; objects outside both prefixes must survive.
Pinned because Compile builds one CompiledAction per rule per kind
all sharing the same bucket index — a bug that lets one rule's
prefix or threshold leak into another (e.g. last-write-wins on a
shared map) would silently expire wrong objects.
Setup: rule A with prefix=logs/ Days=1, rule B with prefix=tmp/
Days=7. Three backdated objects: logs/access.log, tmp/scratch.bin,
data/keep.bin. After the worker runs, logs/ + tmp/ are gone;
data/ — outside both rule prefixes — survives.
* fix(s3/lifecycle): mark ScanAtDate actions active in Compile
Two layers were silently filtering ScanAtDate actions out of routing:
the walker's mode skip (fixed in e785f59d6) and Compile only marking
ModeEventDriven actions active. MatchPath / MatchOriginalWrite both
require IsActive() to emit a key, so a ScanAtDate action that's never
marked active never reaches a dispatch path even after the walker
falls through.
ScanAtDate's only dispatch path is the bootstrap walk's MatchPath
call — there's no bootstrap-completion rendezvous to wait on. Make
the active flag include ModeScanAtDate alongside the
EventDriven+BootstrapComplete combination.
ExpirationDate-based rules now actually fire end-to-end. The
TestLifecycleExpirationDateInThePast integration test exercises this.
* fix(s3/lifecycle): route date kinds via ComputeDueAt
ExpirationDate has MinTriggerAge=0, so router computed
dueTime = info.ModTime + 0 = info.ModTime. For a backdated entry
that mtime is BEFORE rule.ExpirationDate, so EvaluateAction's
now.Before(rule.ExpirationDate) check returned ActionNone and the
date rule never fired through the event-driven path.
ComputeDueAt already knows the per-kind shape — rule.ExpirationDate
for date kinds, ModTime+Days for the rest — so use it as the
single source of truth for dueTime in Route's main loop.
* test(s3/lifecycle): pin bootstrap walker date dispatch
The original TestWalk_DateActionsSkipped pinned the pre-e785f59d6
behavior that the regular walker skipped ExpirationDate. That
walker was rewired to fire date rules whose date has passed (the
SCAN_AT_DATE bootstrap was never wired); update the test to match.
Split into two: post-date entries dispatch, pre-date entries don't.
* test(s3/lifecycle): drop unused putExpiredDeleteMarkerLifecycle
The helper was never called — TestLifecycleExpiredDeleteMarkerCleanup
constructs a combined noncurrent + expired-marker rule inline, which
the helper doesn't cover. The blank-assignment workaround was just
hiding dead code; remove both.
* test(s3/lifecycle): tighten HeadObject termination check to typed not-found
Generic err != nil also passes on transport/auth/timeouts, letting
the test go green without proving the lifecycle action actually
fired. Switch the three Eventuallyf HeadObject predicates to
isS3NotFound, matching the pattern already in the multi-bucket and
expiration-date tests.
* test(s3/lifecycle): guard ListObjectVersions diagnostic against nil
When ListObjectVersions errors, listOut is nil and the diagnostic
log path panics on listOut.Versions before the real assertion fires.
Branch on (listErr != nil || listOut == nil) so the failure log is
robust whatever ListObjectVersions returned.
* test(s3/lifecycle): final unit-test cleanup before integration suite
Closes the residual coverage gaps in the lifecycle packages so the
next track (Layer 3 integration tests) starts from a clean baseline.
Big coverage lifts: lifecycletest 88.7→100.0, engine 81.7→95.1,
s3lifecycle 87.8→95.0, dispatcher 60.3→67.6, router 86.1→88.8,
bootstrap 90.7→92.6. Remaining sub-100% surfaces (reader.Run,
Pipeline.Run, scheduler.Run, multi-step bootstrap orchestration)
need a live filer and belong with the integration suite.
router/helpers_test.go (formerly #9409, now stale on master because
9410-9413 absorbed adjacent surface): direct tests for the pure
helpers Route exercises indirectly — successorModTimeFromContainer
(missing/empty/non-numeric/non-positive/positive round-trip),
logicalKeyFromVersionPath (extracts logical, rejects non-.versions
parent / root-level / no-slashes / bare container), isVersionsContainerKey
(table over container forms), isVersionFolderPath (table over child
forms), isDeleteMarkerEntry (only literal "true" matches),
extractTags (nil/empty, AmzObjectTagging-prefixed only, no-tag
returns nil), hasActiveEventDrivenAction (matches only active+
event-driven, scan-only rejected, unknown skipped). Plus engine
Snapshot accessors: BucketVersioned (compiled flag, unknown bucket
false), BucketActionKeys (full list, unknown nil), Action (unknown
nil), AllActions (every kind), SnapshotID (strictly monotonic).
s3lifecycle/final_cleanup_test.go: ActionKind.String default branch
(unspecified + future-unknown render "unspecified" rather than
empty); HashExtended direct from the lifecycle package (covers it
in this package's coverage report, not just the s3api one) including
nil/empty produces no bytes and identical content hashes the same.
bootstrap/has_prefix_test.go: thin wrapper around strings.HasPrefix
exported by the package; trivial but at 0% pre-fix.
lifecycletest/eventbuilder_old_entry_test.go: pins the OldEntry
fall-through path on Delete events for WithModTime / WithTtlSec /
WithVersionID / WithExtended / WithChunks (existing tests cover
Create events that hit NewEntry only). Adds WithBootstrapVersion
across all three event shapes. Defensive: every With* option is a
no-op on a degenerate event with neither entry populated.
* test(s3/lifecycle): address coderabbit nitpicks on final cleanup
- eventbuilder empty-event test now exercises WithBootstrapVersion
too, with an honest claim about its scope: it targets the event
itself (not an entry), so it sets BootstrapVersion regardless of
whether NewEntry/OldEntry are populated. Renamed the test from
AllAreNoOpsOnEmptyEvent to NoPanicOnEmptyEvent since the original
name overstated the contract.
- HashExtended stability check uses a 3-key map with different
literal orders so the helper's sort path actually does work; a
single-key check can't catch an iteration-order regression.
- HasPrefix test refactored to table-driven so adding a new edge
case is one row instead of two assertion lines.
* test(s3/lifecycle): bundle dispatcher + engine edge-case coverage
Two-package bundle covering uncovered branches in production code that
the existing happy-path tests don't reach. Dispatcher 58.1% → 60.2%
and engine 81.0% → 81.7% (engine lift modest because most branches
were already hit; the nil-rule defensive case is otherwise unreachable
from a Compile flow).
dispatcher (4 tests):
- FilerPersister.Load with nil Store errors with a "nil Store"
message rather than panicking at the Read call.
- FilerPersister.Save with nil Store same.
- FilerPersister.Load with a non-NotFound transport error wraps the
shard ID into the message AND keeps the underlying error
recoverable via errors.Is.
- FilerPersister.Load with successful empty []byte returns an empty
map, not a JSON-decode error — pinning that an existing-but-empty
cursor file is treated as "no entries".
- Tick initializes the retries map on first call without panic so a
freshly-constructed Dispatcher works.
- Tick with already-canceled ctx re-queues the popped Match, returns
zero, and never invokes the LifecycleDelete client — the Match
must not be lost across worker restart.
engine (4 tests):
- rulePredicateSensitive(nil) returns false rather than panicking on
the FilterTags dereference. The non-nil paths run through Compile,
but a defensive nil-rule arrival isn't reachable that way.
- rule with no FilterTags / empty FilterTags map returns false (the
check is len(FilterTags) > 0, so empty must classify as
non-sensitive — pinning catches a flipped >= comparison).
- rule with a populated FilterTags returns true.
* fix(s3/lifecycle): Tick must requeue every drained Match on shutdown
Per codex review on #9413: Tick called Schedule.Drain to pop ALL due
matches at once, then iterated. If ctx canceled mid-loop, only the
current Match was re-added — everything past that index was silently
lost across the worker restart. With N due matches, up to N-1 were
dropped.
Fix: on cancellation, re-add due[i:] (current + remaining) before
returning. Matches already dispatched (due[:i]) stay processed; the
schedule is left exactly as it would be if Drain had returned only
the dispatched prefix.
Strengthen the existing test to enqueue three due matches and assert
sched.Len()==3 after a pre-canceled Tick. Pre-fix the test would have
seen Len()==1 because only the first popped Match was re-added.
* test(s3/lifecycle): bundle reader + scheduler helper coverage
Bundles direct tests for previously-uncovered helpers in two
packages. Bumps reader 73.2% → 79.2% and scheduler 71.6% → 73.6%.
Reader Event predicates (4):
- IsCreate: NewEntry-only event classifies as create
- IsDelete: OldEntry-only event classifies as delete
- both entries (update): neither IsCreate nor IsDelete (strict
exclusivity so router routes updates through their own path)
- no entries (degenerate): neither (so a metadata-only filer event
with no payload doesn't trigger spurious dispatches)
Reader LogStartup (4): exercises both shape branches (single-shard
ShardID vs ShardPredicate), the explicit-StartTsNs override path, and
the Cursor.MinTsNs fallback when StartTsNs=0. Side-effect-only
function; tests pin compile-time shape and visit each code path.
Scheduler pipelineFanout.InjectEvent (5):
- nil event silently absorbed (no follow-up panic in receiving
pipeline)
- unknown shard returns nil (forward-compat for future shard-mapping
gaps)
- known shard succeeds
- ctx cancellation propagates when underlying pipeline's buffer fills
- routes to the correct pipeline among multiple, with cross-pipeline
isolation proven via per-pipeline buffer state
* test(s3/lifecycle): rename canceled to canceledCtx in fanout test
Per gemini review on #9412: a bare 'canceled' identifier reads like
a bool. Rename to canceledCtx so the type is obvious at the call site.
* test(s3/lifecycle): bundle dispatcher pipeline helper coverage
Five untested helpers in dispatcher/pipeline.go and one accessor in
dispatcher.go that previously sat at 0% coverage. Bumps the dispatcher
package from 58.8% → 64.7%.
observeScheduleDepth: gauge tracks Schedule.Len; pinned for empty,
populated, and post-Drain states with a unique shard label so the
test doesn't bleed into other parallel tests sharing the global
counter.
ensureEventsChan: positive EventBuffer sizes the channel; zero and
negative fall back to defaultEventBuffer so a misconfigured operator
doesn't end up with a zero-cap channel that blocks every InjectEvent;
sync.Once contract holds under 32-goroutine concurrent invocation.
InjectEvent: delivers the same pointer to p.events (no defensive
copy); a canceled ctx propagates context.Canceled rather than
silently dropping the event; allocates the channel via
ensureEventsChan so a caller can inject before Run starts.
isCtxShutdown: nil → false; context.Canceled / DeadlineExceeded →
true; gRPC-wrapped Canceled / DeadlineExceeded codes → true (so
shutdown isn't misclassified as transport failure when filer/S3
RPCs unwrap as status); other errors (Unavailable, Internal, plain)
→ false.
cursorFileName: shard 0 / 1 / 9 / 10 / 15 all pad to two digits so
on-disk filenames stay sorted by shard ID — pinned so a refactor that
drops %02d doesn't break existing cursor files.
* test(s3/lifecycle): drop ScheduleDepthGauge label series at test end
Per gemini review on #9411: even with a unique shard label, the gauge
series persists in the global Prometheus registry across test runs in
the same process. Add a defer to DeleteLabelValues so the registry
stays clean.
* test(s3/lifecycle): bundle dispatcher + engine accessor coverage
Two-package bundle covering pure helpers and snapshot read-side
accessors that the router and dispatcher reach for at runtime. None
were directly tested; regressions previously surfaced only as
downstream Tick / Match / Compile failures.
dispatcher (10 tests):
- keyOf: derives every retryKey field from the Match; equal Match
values produce equal keys (so the second dispatch hits the first's
retry counter); distinct VersionIDs and ActionKinds produce
distinct keys (so a noisy version can't starve a healthy one,
and two kinds on the same object don't share a budget).
- budget(): configured value when set; defaultRetryBudget when zero
or negative — pins the >0 guard against a flipped comparison.
- backoff(): same pattern as budget for RetryBackoff.
engine snapshot accessors (8 tests):
- OriginalDelayGroups exposes the compiled per-delay groups; rules
with multiple kinds at different cadences land in distinct entries;
scan-only actions don't leak into delay groups so the dispatcher
doesn't try to drive them event-driven.
- PredicateActions populated for tag-sensitive rules, empty for non-
tag-sensitive ones (so MatchPredicateChange doesn't route
irrelevant kinds).
- DateActions surfaces ExpirationDate verbatim for date kinds; empty
for non-date rules.
- MarkActive on an unknown key is a no-op (durable bootstrap-complete
write races a recompile that drops the rule; panic here would crash
the worker).
- MarkActive flips a fresh-no-prior-state action from inactive to
active.
- BucketActionKeys covers every kind RuleActionKinds reports.
* test(s3/lifecycle): strengthen snapshot accessor content assertions
Per gemini review on #9410: assertions previously only checked counts
and non-empty status. Verify the specific ActionKeys land where
expected so an indexing regression that produces the right number of
items with wrong kinds gets caught.
OriginalDelayGroups: each delay group's slice asserts.Contains the
specific (bucket, rule_hash, kind) ActionKey instead of just
NotEmpty.
PredicateActions: assert.Contains the expected key instead of just
NotEmpty.
BucketActionKeys: every key.Bucket must equal the test bucket (catches
cross-bucket leak), and ElementsMatch pins kinds against
RuleActionKinds.
Both helpers were exercised indirectly through MatchOriginalWrite /
MatchPath; pinning them directly catches a regression at the helper
level so a Match-test failure isn't the first signal of a broken
filter.
prefixMatches: empty prefix fast path; exact-prefix match; non-match
rejection; path shorter than prefix.
filterAllows: no-filter accepts any event; FilterSizeGreaterThan is
strictly > (boundary value rejected); FilterSizeLessThan is strictly
<; zero-size thresholds mean "not set" (must let any size through —
a regression treating 0 as a real threshold would reject everything);
required tag present accepts; missing key, empty tags map, wrong
value, and missing-among-multiple all reject; size + tag filters are
AND'd so either failing rejects.
* test(s3/lifecycle): meta-log Event builder + monotonic clock fixture
Several test files build *reader.Event ad-hoc; consolidate the common
shape into the lifecycletest package as task #12 spec calls out
("fixture meta-log generator"). New tests using the builder don't
have to thread Mtime / ShardID / leaf-name semantics by hand, and
existing helpers can migrate over time without churning this PR.
NewCreate / NewDelete / NewUpdate cover the three event shapes;
WithSize / WithModTime / WithTtlSec / WithVersionID / WithExtended /
WithChunks / WithBootstrapVersion / WithShardID compose deterministic
overrides. ShardID defaults to s3lifecycle.ShardID(bucket, key) so
events route through the same shard the production reader would.
MetaLogClock issues monotonic timestamps with a configurable step
(default 1s); concurrent-safe so fan-out fixtures don't have to lock
externally.
15 unit tests pin every option, the IsCreate/IsDelete/IsUpdate
discriminators, leaf-name extraction for nested keys, ShardID
derivation, option-ordering semantics, the concurrent clock contract
under -race, and a Peek-doesn't-advance check.
* test(s3/lifecycle): address review comments on event builder
- leafOf strips trailing slashes before splitting so directory-key
fixtures (e.g. "folder/") get the slashless leaf "folder" — pre-fix
it returned "" which would break router tests for directory markers.
- NewUpdate now seeds OldEntry.Attributes.Mtime with the event ts
(matching NewDelete), so a downstream router that compares mtimes
doesn't see a synthetic 1970 epoch on the pre-update state.
- New WithOldSize / WithOldChunks / WithOldModTime options let Update
events configure pre-update state independently. The unprefixed
variants still target NewEntry on Update events; the With Old*
options are no-ops on Create (no OldEntry to mutate) and never bleed
into NewEntry.
5 new tests pin: directory-key + multi-slash leaf extraction; OldEntry
mtime default on Update; the WithOld* targeting + Create-event
no-bleed contract.
Three branches: gRPC error from GetFilerConfiguration must propagate
(else Execute would proceed to dial S3 with an empty buckets path
and never dispatch); a non-empty DirBuckets is honored verbatim so
operators with a non-default layout aren't force-routed to /buckets;
an empty DirBuckets falls back to the documented "/buckets" default
rather than returning empty (which would route to root). stubFilerConfigClient
embeds filer_pb.SeaweedFilerClient so methods other than the one
under test panic if called — keeps the surface narrow.
Compile tests cover decideMode indirectly; these direct tests pin
every branch so a regression in the classifier itself can't slip
behind a more elaborate Compile failure.
Pinned: nil rule and Disabled status both → Disabled; ExpirationDate
→ ScanAtDate without consulting retention; metaLogRetention=0 means
unbounded so any horizon → EventDriven; horizon within retention →
EventDriven; horizon exceeding retention → ScanOnly; bootstrapLookback
adds to horizon (not retention) so a near-threshold case is still
gated; zero horizon (rule field unset) skips the gate. RuleMode.String
must render the documented names for every variant; an unknown value
collapses to "unspecified" rather than empty or panic.
* test(s3/lifecycle): pin Schedule edge cases beyond happy path
Pre-existing schedule_test covered the happy path (ordered Drain,
empty schedule, duplicates, boundary-inclusive). Five new tests pin
edge cases the dispatcher relies on:
- Drain at a time before any DueTime returns nil and leaves the heap
intact, so the dispatcher can't accidentally consume future-due
matches.
- NextDue after partial Drain points to the next earliest, catching
a Drain that forgets the heap invariant.
- Add after Drain bubbles a fresh earlier DueTime to the front, so
late-arriving high-priority matches don't sit behind older ones.
- Drain returns Matches in ascending DueTime order regardless of
insert order — explicit pinning of the documented contract.
- Concurrent Add+Drain across 64 goroutines under -race.
* test(s3/lifecycle): actually exercise Drain in AddAfterDrain test
Per coderabbit review on #9403: the test name promised "after Drain"
but the previous body only Add'd both items without ever calling
Drain in between. Insert a real Drain (popping "drain_me") before
the second Add, so the heap-invariant-across-Drain-then-Add path is
actually pinned. Bumps the after-Drain Match's DueTime out of the
way so the Drain in step 3 returns it deterministically.
test(s3/lifecycle): pin toProtoActionKind + toProtoIdentity
The two converters are the worker-side wire to LifecycleDelete; a
miss in toProtoActionKind sends ACTION_KIND_UNSPECIFIED that the
server rejects FATAL, and a wrong toProtoIdentity flips the CAS
witness so every dispatch comes back NOOP_RESOLVED with STALE_IDENTITY
even though the entry hasn't changed.
10 tests pin: every listed s3lifecycle.ActionKind maps to its proto
counterpart (table-driven, one subtest per kind); ActionKindUnspecified
and a future unknown kind both collapse to ACTION_KIND_UNSPECIFIED
(forward compat); nil EntryIdentity stays nil (preserves the no-CAS
sentinel); a populated identity copies every field; a zero-valued
identity still produces a non-nil output so the server treats it as
a real CAS witness rather than no-CAS.
* test(s3/lifecycle): pin Pipeline.Run dependency + shard validation
Pre-existing TestPipelineRunRequiresDependencies only checked that an
empty Pipeline errors; it didn't pin which specific dependency must be
present. A refactor that makes one nilable accidentally would slip
through.
8 new tests pin every validation branch in Pipeline.Run: missing
Engine / Persister / Client / FilerClient each error with "missing
required dependency"; missing BucketsPath errors with its own
distinct message so operators can spot the missing wiring; ShardID =
-1 / ShardCount errors with a range message (covers the half-open
[0, ShardCount) boundary so a < to <= refactor can't introduce a
one-past-the-end shard); and a multi-shard config with one
out-of-range entry refuses the whole run rather than silently
disabling the rest.
* test(s3/lifecycle): refactor Pipeline.Run validation tests as table-driven
Per gemini review on #9402: collapse the eight per-branch tests into
TestPipelineRunValidation with a slice of (name, mutate, wantErr)
cases. Same coverage, ~30 fewer lines, idiomatic Go pattern that
makes adding a new validation case trivial.
* test(s3/lifecycle): pin Descriptor structural invariants
Pre-existing handler tests covered Capability and Detect; Descriptor
was previously untested. A drift between the form fields it advertises
and the defaults config.go reads silently breaks the admin UI in two
ways: the form renders blank (admin can't tune) or the worker clamps
to a hardcoded fallback ignoring the admin's edits. The new tests
catch both directions.
Pinned: jobType / DisplayName / Description / DescriptorVersion;
AdminConfigForm exposes a workers field whose default matches
defaultWorkers; WorkerConfigForm has a default and a field for every
cadence knob ParseConfig reads (dispatch_tick / checkpoint_tick /
refresh_interval / bootstrap_interval / max_runtime); AdminRuntime-
Defaults hits a daily cadence with bounded detection timeout and
single job per detection.
* test(s3/lifecycle): tighten Descriptor invariant assertions
Per gemini review on #9401: pin DetectionTimeoutSeconds to its exact
value (60) instead of ">0" so an accidental tweak is caught, and
assert WorkerConfigForm fields are INT64 (matching ParseConfig's
readInt64) so a STRING-type drift can't silently make the worker
ignore admin edits.
Three pure-validation paths in lifecycleDispatch return BLOCKED before
any filer call; without coverage a refactor could let them fall
through to a real delete. ABORT_MPU at dispatch time is a defensive
catch (the route bypass should never happen, but if it does the
fallthrough must not become a default-case rm). Unknown ActionKind
gets the same treatment for forward-compatibility with new proto
values. Empty version_id on noncurrent / EXPIRED_DELETE_MARKER kinds
must be rejected before deleteSpecificObjectVersion is called, so a
malformed event can't silently delete the latest pointer.
Operator-visible signal for the metadata-only delete path landed in
PR 9390. Increment seaweedfs_s3_lifecycle_metadata_only_total{bucket,
rule_hash} after each successful unversioned or noncurrent / expired-
marker delete that took the skip-chunk path. Suspended-versioning
null delete is intentionally not counted: that path's nil err can
mean "deleted" or "NotFound", so a count there would over-report.
rule_hash is hex-encoded for label safety; nil bytes collapse to
"". DeleteBucketMetrics tears the new series down alongside the
existing lifecycle counters when a bucket is removed.
7 tests pin the Execute early-return surface that runs without a
filer or S3 dial: nil request / nil Job / nil sender all error;
foreign JobType errors with the offending name in the message; no
S3 endpoints in cluster context errors (Execute is stricter than
Detect — the admin shouldn't have routed the job there); missing
filer_grpc_address parameter errors (proposal must have been tampered
with or dropped); empty JobType is accepted as broadcast routing and
flows through to the next validation step. The dial path itself is
intentionally not covered here — those tests would need an in-process
gRPC server and belong with the integration suite.
* test(s3/lifecycle): cover InMemoryPersister deep-copy contract
8 tests pin the persister contract other lifecycle tests rely on for
cursor checkpointing: Load on an unknown shard returns an empty map
(not an error); Save then Load roundtrips; Save copies the input so
caller-side mutation doesn't bleed into stored state; Load returns a
copy so caller-side mutation of the snapshot doesn't bleed back; Save
replaces (not merges) prior state so stale resume points don't survive
restart; different shards stay isolated; saving an empty map clears
state; concurrent Save+Load is race-free under -race. A regression on
any of these silently corrupts downstream tests.
* test(s3/lifecycle): assert.NotContains for InMemoryPersister key absence
assert.Empty on a map[K]V index returns true when the value is the
zero value, which would mask a key that leaked through with int64(0).
Use assert.NotContains so the assertion fails on key presence
regardless of the stored value.
* test(s3/lifecycle): cover worker handler Detect + helpers
13 tests pin the worker-handler surface that runs without a live filer
or S3 server. Pure helpers: clusterS3Endpoints (nil context, empty
list, filter empty entries while preserving order, all-valid
passthrough); readString (missing key, nil ConfigValue, wrong kind
falls back, string returned). Capability advertises jobType with
single-job concurrency caps. Detect: nil request / nil sender / wrong
JobType all error; no S3 endpoints emits a 'skipped' activity and
completes with success; no filer addresses behaves the same; the
happy path proposes one job parameterized with the first filer
address; empty JobType is accepted (broadcast detect); a
SendProposals failure propagates without firing complete.
* test(s3/lifecycle): cover SendComplete error propagation in worker Detect
The recordingSender already supported forcing an err on SendComplete
via errOn, but no case exercised it. A SendComplete failure must
propagate so the admin learns the completion signal never landed;
proposals went out before the failure so they remain recorded.
* test(s3/lifecycle): cover scheduler configload surface
LoadCompileInputs is the bridge between the filer's bucket directory
and the engine snapshot the scheduler compiles every refresh; a missed
or misclassified bucket silently disables lifecycle for that prefix
until the next refresh. Tests pin: empty bucket dir, files at the
bucket level skipped, buckets without the lifecycle XML extended key
skipped, empty-bytes XML skipped, valid XML becomes a CompileInput,
versioning attr propagates to CompileInput.Versioned, malformed XML
surfaces as a ParseError without aborting the walk, and pagination
across the 1024 page boundary preserves bucket order.
Also covers the IsBucketVersioned (case + whitespace tolerance,
rejection of garbage values) and AllActivePriorStates (one entry per
(bucket, ruleHash, actionKind), bucket-keyed isolation) helpers.
* test(s3/lifecycle): tighten configload pagination boundary check
Switch the bucket-count check to require.Len so a regression that
returns the wrong number of buckets fails fast before the boundary
asserts panic on out-of-range index. Add explicit assertions on the
last entry of page 1 (b01023) and the first entry of page 2 (b01024)
so a pagination-loop bug that drops or duplicates the seam is caught
directly rather than only via the count check.
* test(s3/lifecycle): cover CompareVersionIds tiebreak surface
13 tests pin every documented branch of the version-id comparator and
its helpers (isNewFormatVersionId, getVersionTimestamp): equality and
short-circuit paths, null sorting last, both-new-format with smaller-
=-newer ordering, both-old-format with larger-=-newer ordering, mixed-
format compared by parsed timestamp, mixed-format with synthesized
equal timestamps, length / null / non-hex rejection, the strictly-
greater-than threshold boundary at 0x4000000000000000, and the
inverted-value invariant the comparator relies on. Getting any axis
wrong silently inverts retention rankings, which would resurrect
deleted versions or evict live ones.
* test(s3/lifecycle): use plain assert.Equal in mixed-format compare test
The previous local require := assert.New(t) shadowed testify's require
package while actually returning an assert.Assertions (continue-on-fail
semantics, not fail-fast). Use plain assert.Equal(t, ...) calls so the
behavior matches the variable's name and the rest of the file.
* test(s3/lifecycle): cover dispatcher's filerSiblingLister surface
Tests pin the four routing-critical filer interactions on the
filerSiblingLister: Survivors (count cap, LoneEntry semantics,
null-version detection across regular files and directory-key
markers, error propagation in both list and lookup paths),
ListVersions (NotFound collapse, dir/missing-id filtering,
1024-page boundary, error propagation), LookupNullVersion (regular
file, explicit-null flag, directory-key marker accept, plain-dir
reject, NotFound collapse, error propagation), and LookupVersion
(empty version-id no-op, v_ prefix, NotFound collapse, error
propagation).
The fake SeaweedFilerClient mirrors the real filer's NotFound
shape — gRPC succeeds at stream creation and the first Recv()
surfaces filer_pb.ErrNotFound — which is what the lister's
errors.Is check depends on. NewFullPath strips a trailing slash
before splitting so directory-key markers are stored under their
slashless Name.
* test(s3/lifecycle): gofmt sibling_lister_test.go
Trailing comment alignment.
test(s3/lifecycle): assert per-goroutine errors in concurrent fake test
The previous TestFake_ConcurrentCallsSerializeWithoutDeadlock dropped
the err return from each LifecycleDelete call, so a regression in the
concurrent path could pass the length-only assertion. Capture each
err on a buffered channel and require.NoError after wg.Wait().
* test(s3/lifecycle): fake LifecycleDelete server for component tests
A reusable double for SeaweedS3LifecycleInternalServer with per-key
FIFO outcome queues, a fallback Default, and recorded request capture.
Tests of the worker pipeline that need to hit the proto boundary can
queue up DONE/NOOP/RETRY/FATAL/SKIPPED_OBJECT_LOCK responses per
(bucket, objectPath, versionId) and assert dispatch order against
Recorded(). SetError flips the server into transport-failure mode
without polluting the request log.
* test(s3/lifecycle): use struct map key for FakeLifecycleServer queues
Bucket / object path / version-id are user-supplied strings that can
contain "/" or "@", which would collide if the queue map were keyed by
"<bucket>/<object>@<version>". Switch to a struct key so the
components stay separate.
* test(s3/lifecycle): deep-copy recorded LifecycleDelete requests
Tests that mutate a Recorded() entry — or a request pointer they
already passed in — were able to corrupt the fake's bookkeeping
because the slice carried shared pointers. Clone with proto.Clone at
both record and read time so the fake holds an independent snapshot
of every arriving request and hands callers an independent snapshot
back. Tightened TestFake_VersionIDPartOfKey error checks while there.
* refactor(s3): thread metadataOnly into delete helpers
Add a metadataOnly bool to deleteUnversionedObjectWithClient and
deleteSpecificObjectVersion. When true the helper sends IsDeleteData=
false to the filer's DeleteEntry RPC so per-chunk DeleteFile RPCs are
skipped — the volume server reclaims chunks on its own at TTL drop.
Non-lifecycle callers (DELETE handlers, batch delete) pass false to
preserve today's eager-chunk-delete behavior; only the lifecycle
handler in the next commit will pass true.
* feat(s3/lifecycle): metadata-only delete when entry TtlSec > 0
Per-write TTL stamping (PR 9377) sets Attributes.TtlSec on every
lifecycle-fitting entry. When the live entry the LifecycleDelete
handler fetched carries TtlSec > 0 the volume server is guaranteed
to reclaim chunks at TTL drop, so the filer can skip per-chunk
DeleteFile RPCs and just remove the entry record. lifecycleDispatch
now computes metadataOnly from the live entry and threads it through
the unversioned, suspended-null, and noncurrent/expired-marker delete
paths. createDeleteMarker is unaffected — it creates a marker, never
deletes chunks.
* test(s3/lifecycle): cover reader cursor + Run validation contracts
Layer 2 tests pinning four reader-package contracts the dispatcher
pipeline depends on: MinTsNs anchors at frozen positions, Snapshot
returns a deep copy in both directions, Restore replaces (not merges),
and Run validates ShardID/Events/BucketsPath before subscribing.
* test(s3/lifecycle): tighten cursor composition assertions
Snapshot deep-copy: also assert cursor doesn't see keys added to the
returned map. Restore replace: freeze before second Restore and assert
IsFrozen returns false after, pinning the contract that Restore wipes
frozen state alongside the value map. Run validation: bound the call
with a 5s context timeout so a regression that lets Run reach the nil
client surfaces as a failure instead of a hang.
* test(s3/lifecycle): Layer 2 multi-shard composition for the dispatcher
The existing dispatcher unit tests cover individual outcomes
(DONE / RETRY_LATER / BLOCKED / etc.) on a single shard, and
pipeline_test.go has only one end-to-end happy-path assertion.
Multi-shard composition — the contract Pipeline.Run wires up at
runtime — was untested at the component level.
Add four Layer 2 tests in dispatcher/multi_shard_test.go:
Two events for two shards land in different schedules, dispatch
independently, and each cursor advances only for its own event
(no cross-contamination on the action-key map).
A poison event on shard 0 returns BLOCKED and freezes shard 0's
cursor; shard 1's normal event continues to dispatch and its
cursor advances. Per-shard isolation contract.
Save/Load round-trips a per-shard cursor snapshot through the
Persister: a fresh dispatcher restores the same TsNs map. Pins
the contract Pipeline.Run drives on the checkpoint ticker.
RETRY_LATER respects RetryBackoff against the wall clock — a
Tick within the backoff window doesn't re-dispatch; a Tick past
the new DueTime does. Guards against premature retries from
refresh ticks landing inside the backoff.
Pipeline.Run itself can't run here (it builds a real reader.Reader),
so the tests share the same fakeClient pattern dispatcher_test.go
uses and drive Tick directly.
* test(s3/lifecycle): drop unused snapshot helper and addAndTick parameter
* feat(s3/lifecycle): bootstrap re-walk cadence + operator hooks (Phase 8)
scan_only actions only fire from the bootstrap walk: the engine
classifies a rule as scan_only when its retention horizon exceeds the
meta-log retention, so event-driven routing can't be trusted. Today
each bucket walks once per process, so a long-running worker never
revisits — scan_only retention only catches up when the worker
restarts.
Replace BucketBootstrapper.known (set) with BucketBootstrapper.lastWalk
(name -> completion time). KickOffNew now re-walks a bucket whose
last walk completed more than BootstrapInterval ago. Zero interval
preserves the legacy walk-once-per-process behavior so existing
deployments don't change cadence by default. walkBucket re-stamps
on success and clears the stamp on failure (via MarkDirty), so the
next KickOffNew picks failed walks back up.
Add MarkDirty / MarkAllDirty operator hooks for forced re-walks, and
a Now func() for testable time travel.
weed shell run-shard grows --bootstrap-interval (cadence knob) and
--force-bootstrap (drop in-memory state at startup so every bucket
walks again immediately, useful when a config change should take
effect without a restart).
Tests: cadence respected (skip inside interval, re-walk past it);
zero interval keeps once-per-process; MarkDirty forces re-walk
under a 24h interval; MarkAllDirty resets every record. The
fakeClock helper guards the test clock with a mutex so race-detector
runs are clean.
* fix(s3/lifecycle): split walk state, thread BootstrapInterval through worker, drop dead flag
Three issues with the Phase 8 cadence work as it landed:
1. lastWalk did double duty as both completed-walk timestamp and
in-flight debounce. A walk that took longer than BootstrapInterval
would have a fresh KickOffNew start a duplicate goroutine on the
next refresh tick because the stamp from KickOffNew looked stale
against the interval. Split into lastCompleted (set on success)
and inFlight (set on dispatch, cleared after the walk goroutine
returns success or failure). KickOffNew skips inFlight buckets
regardless of cadence.
2. The cadence knob existed on `weed shell` but not on the production
path: scheduler.Scheduler constructed BucketBootstrapper without
BootstrapInterval, and weed/worker/tasks/s3_lifecycle/Config had
no field for it. Add Scheduler.BootstrapInterval, parse
`bootstrap_interval_minutes` in ParseConfig (zero = legacy walk-
once-per-process; negative clamps to zero), and forward it from
the handler. Tests cover default, override, clamp, and explicit-zero.
3. --force-bootstrap was a no-op: BucketBootstrapper is freshly
allocated at command start, so MarkAllDirty on empty state does
nothing, and the flag couldn't influence an already-running
process anyway. Remove it; a real runtime trigger (SIGHUP, control
RPC) is a separate change.
In-flight regression: a blockingInjector pins the first walk in
progress while the test advances the clock past the interval. The
second KickOffNew is a no-op (inFlight check). After release, the
post-completion KickOffNew within the interval is also a no-op.
* test(s3/lifecycle): wait for lastCompleted stamp before advancing fake clock
The cadence test polled listedN to know "the walk happened" — but
that fires once both list passes are issued, while the success-stamp
lands later, after walkBucketDir returns. A clock.Advance(30m)
between those two events would record the stamp at clock+30m
instead of T0; the next assertion would then see now.Sub(last) < 1h
and skip the expected re-walk. Tight in practice but exposed under
-race / load.
Add a waitForCompleted helper that polls b.lastCompleted directly,
and use it before each clock advance in both the cadence and zero-
interval tests.
* fix(s3/lifecycle): expose bootstrap interval in worker UI; honor MarkDirty during walks
Two follow-ups on Phase 8.
The worker config descriptor had no bootstrap_interval_minutes field,
so the production operator UI couldn't enable the cadence — only the
internal ParseConfig + Scheduler wiring knew about it. Add the field
to the cadence section (MinValue=0 since 0 is the legacy default) and
include the default in DefaultValues so existing deployments see the
knob with the right preset.
MarkDirty / MarkAllDirty silently lost their effect when a walk was
in flight: the methods cleared lastCompleted, but the walk's success
path then wrote a fresh timestamp, hiding the operator's invalidation.
Track a pendingDirty set; the walk goroutine consumes the flag on
exit and skips the success stamp, so the next KickOffNew picks the
bucket up immediately.
Regression: pin a walk in progress with a blockingInjector, MarkDirty
the bucket, release the walk, and assert lastCompleted stayed empty
plus the next KickOffNew triggers a new walk inside the
BootstrapInterval window.
* refactor(s3/lifecycle): drop unused MarkDirty / MarkAllDirty + pendingDirty
These methods were the operator-hook half of Phase 8, but the only
caller (--force-bootstrap on the shell command) was removed when it
turned out to be a no-op against a freshly-allocated bootstrapper.
Nothing in production calls them anymore.
Strip the dead surface: MarkDirty, MarkAllDirty, the pendingDirty
set, the dirty-suppression branch in walkBucket, and the three tests
that only exercised those methods. BootstrapInterval-driven
re-bootstrap is the live mechanism. A real runtime trigger (SIGHUP,
control RPC) is a separate change with a real call site.
* feat(s3/lifecycle): pointer-transition routing for live PUTs (Phase 5b/4)
Bootstrap covers existing versions, but a live PUT that creates a new
.versions/<v-new> file and updates the parent's ExtLatestVersionIdKey
didn't fire NoncurrentDays / NewerNoncurrent on the displaced prior
version until the next bootstrap. Close that runtime gap.
The meta-log already emits an Update event for the .versions/
directory itself when the latest pointer changes; the router was
dropping it because buildObjectInfo returns nil for directories. New
branch in Route detects that shape (versioned bucket, NewEntry +
OldEntry both directories with the .versions/ suffix, ExtLatestVersionIdKey
changed, ID different from the new ID) and emits a Match against the
LOGICAL key with VersionID=oldID. Match.Identity comes from a single
LookupVersion RPC for the displaced version file; SuccessorModTime is
the directory update's mtime, which is the moment the displaced
version became noncurrent.
SiblingLister grows LookupVersion(bucket, key, versionID) for that
single-RPC fetch. filerSiblingLister implements it; routing path
treats NotFound as "displaced version was hard-deleted in the
meantime, suppress" rather than an error.
The router gates the lookup on at least one active event-driven
NoncurrentDays / NewerNoncurrent rule for the bucket, so most buckets
pay nothing per directory update.
Tests: pointer-flip fires NoncurrentDays with displaced version_id;
unchanged pointer skips; empty old pointer skips (first-PUT scenario);
displaced-version NotFound suppresses; no-rule skips lookup;
NewerNoncurrentVersions retains rank-0; unversioned bucket skips.
* fix(s3/lifecycle): SuccessorModTime cache + NewerNoncurrent expansion
Two correctness gaps in pointer-transition routing.
The .versions/ directory's own Attributes.Mtime is preserved across
pointer updates by updateLatestVersionInDirectory: it's a stale clock
relative to the freshly-written latest version. Using it as the
displaced version's SuccessorModTime made NoncurrentDays compute
due = staleMtime + days, which fires immediately on a fresh PUT
into an old .versions/ container. Read ExtLatestVersionMtimeKey
written by setCachedListMetadata; suppress (return no matches) when
the cache is missing rather than fall back to dir mtime.
Single-oldID lookup is only enough for pure
NoncurrentVersionExpirationDays. Any rule with NewerNoncurrentVersions
> 0 cares about the noncurrent ranks, and a pointer flip shifts every
prior noncurrent's index by one — the version that just crossed the
keep-count threshold needs to be evaluated too. When any matching
rule needs ranks, list the full .versions/ container, sort newest-
first with mtime + version-id tiebreak, and route every noncurrent
with its real index. Identity-CAS dedups against earlier schedules.
SiblingLister grows ListVersions(bucket, key); filerSiblingLister's
implementation paginates the container fully.
Two regression tests: stale dir mtime + correct cached mtime
schedules ~30 days out (not immediate); NewerNoncurrentVersions=2
with 4 versions fires on the rank-2 entry that just crossed the
threshold while rank-0/1 are retained.
* fix(s3/lifecycle): bound pointer-transition expansion to threshold crossings
routePointerTransitionExpand emitted a Match for every eligible
noncurrent on every PUT. Schedule.Add doesn't dedup, so identity-CAS
at dispatch only saved the wasted RPC, not the heap slot. A hot key
with many already-eligible versions and a count rule would push
O(versions) entries per flip, repeatedly, until dispatch caught up.
Bound the emission to versions that newly entered eligibility on
this specific flip: rank 0 (the displaced version, for the
NoncurrentDays clock) plus rank == rule.NewerNoncurrentVersions
for each active count-gated rule (the version that just crossed
from kept to expired). Bootstrap still owns full backfill for
versions that were already over-threshold.
Adds a regression with 6 versions and NewerNoncurrentVersions=2:
asserts only the rank-2 entry that just crossed fires, not the
already-over-threshold rank-3/rank-4 entries.
* fix(s3/lifecycle): suppress pointer-transition expansion when newID missing
routePointerTransitionExpand defaulted latestPos to 0 if newID wasn't
found in the listing. That made the actual newest sibling latest
against the pointer's intent, then misranked every other version. A
race between the pointer write and the version write could land us
there.
Default latestPos to -1, set it only on a real match, and suppress
the expansion when the search misses. Bootstrap repairs state on
the next walk.
The NewerNoncurrentVersions retention test was setting only
lookupEntry, so Route never reached the expansion path it claimed to
exercise. Repoint to listVersions and assert ListVersions was
consulted while LookupVersion was not. Adds a regression covering
the missing-newID suppression directly.
* fix(s3/lifecycle): include bare null version in pointer-transition routing
Bootstrap models the bare-key object as a "null" sibling alongside
.versions/ children, but the live pointer-transition path didn't.
Two cases lost:
1. oldID == "" was treated as "nothing displaced". A pre-versioning
bare object becomes noncurrent when the first versioned PUT lands
and the pointer flips to a real id, but live routing skipped it
and waited for the next bootstrap.
2. The expansion path's ListVersions returned only .versions/
children. With a bare null in the picture, the noncurrent ranks
were wrong, so NewerNoncurrentVersions could keep the wrong
versions and delete the right ones (or vice versa).
SiblingLister grows LookupNullVersion(bucket, key) returning the
bare entry plus an explicit-null flag (matches the bootstrap shape).
filerSiblingLister implements it via util.NewFullPath +
filer_pb.LookupEntry.
routePointerTransitionDisplaced: oldID == "" now consults
LookupNullVersion. When the bare entry exists, route it as
VersionID="null" against the LOGICAL key.
routePointerTransitionExpand: collect .versions/ children plus the
null entry into one sibling slice before sorting and ranking. The
threshold-crossing logic now sees the same N-version set that
bootstrap would compute.
Three new tests: oldID == "" with no null is a no-op (one null
lookup, no version lookup); oldID == "" with a bare null schedules
NoncurrentDays as VersionID="null"; expansion with a bare null
between .versions/ siblings places null at its mtime-correct rank
and only that rank-N entry fires.
* fix(s3/lifecycle): atomic listPageSize so test cleanup doesn't race
KickOffNew dispatches walks via `go b.walkBucket(...)`. A test that
finishes before its goroutines drain leaves them running into the
next test's t.Cleanup, which mutates listPageSize. -race spots the
read/write collision intermittently. Convert listPageSize to
atomic.Uint32; tests use Load/Store. No production semantics change.
* fix(s3/lifecycle): null becomes latest when suspended PUT clears pointer
The router treated newID == "" as if the cached
ExtLatestVersionMtimeKey were still authoritative — but that cache
holds the displaced version's mtime, written by setCachedListMetadata
when the prior version became latest. Using it as SuccessorModTime
made NoncurrentDays=30 immediately fire on a 100-day-old displaced
version even though it became noncurrent today.
When newID == "" the bare null is the new latest. Look it up,
substitute its mtime as the successor clock, and substitute "null"
as the latestPos target for the expansion path's id match. Both
displaced and expand paths now derive the right clock.
updateIsLatestFlagsForSuspendedVersioning was the upstream cause of
the staleness — it cleared ExtLatestVersionIdKey and FileNameKey but
left the cached size/mtime/etag/owner/delete-marker behind. Call
clearCachedVersionMetadata so the .versions/ container is consistent
with "null is latest". The router-side guard is still needed for
older deployments that ran the buggy code, but new writes won't
exercise the workaround.
Two regressions: 100-day-old displaced under NoncurrentDays=30 with
a today-null PUT schedules ~30d out (not immediate); same shape with
NewerNoncurrentVersions=2 ranks the null at latest and only the
rank-2 entry fires.
* feat(s3/lifecycle): NoncurrentVersionExpiration via bootstrap (Phase 5b/3)
Bootstrap now expands every <key>.versions/ directory into one event
per version with sibling state pre-computed. The router fires
NoncurrentDays / NewerNoncurrent off these events using
SuccessorModTime as the noncurrent clock; previously these rules
never ran on a versioned bucket because buildObjectInfo couldn't
classify version-folder events without the latest pointer.
Mechanics
walkBucketDir treats a directory ending in .versions and carrying
ExtLatestVersionIdKey as a SeaweedFS .versions container — emit it
once and skip the recursion. Coincidentally-named directories without
the latest pointer recurse normally.
BucketBootstrapper.expandVersionsDir lists the children, sorts
newest-first by mtime, resolves the latest position from the pointer,
and injects a synthesized reader.Event per version with
BootstrapVersion populated. NoncurrentIndex is 0-based among
noncurrents in newest-first order; SuccessorModTime is the immediate
newer sibling's mtime (zero for the latest). Pointer naming a missing
or absent version falls back to the newest-by-mtime sibling so a
race window can't flag every entry as noncurrent.
routeBootstrapVersion uses BootstrapVersion to build ObjectInfo
directly (bypassing the version-folder skip in buildObjectInfo) and
runs the standard match loop. ABORT_MPU is excluded by kind-shape
gate. The schedule clock uses SuccessorModTime for noncurrents and
ModTime for the latest, so the dispatcher fires when the rule's days
threshold is met. Match.ObjectKey is the LOGICAL key,
Match.VersionID is the marker's stored version_id — the dispatcher
reaches deleteSpecificObjectVersion or createDeleteMarker correctly.
Layer 2 tests cover both sides. Router: latest fires ExpirationDays;
noncurrent fires NoncurrentDays; NewerNoncurrentVersions retains the
N newest noncurrents; ABORT_MPU never matches. Bootstrap: .versions
dir emitted once and not recursed; missing latest pointer falls back
to newest; backdated PUT (latest pointer is older by mtime) keeps
the right noncurrent index; delete-marker flag propagates.
* fix(s3/lifecycle): no VersionID for latest expirations, child-based dir disambig
Two correctness gaps in Phase 5b/3.
Bootstrap was pinning the version_id on every Match. For
EXPIRATION_DAYS / EXPIRATION_DATE on the latest version this is
unsafe: between schedule and dispatch a fresh PUT can land, the
dispatcher would still identity-match against the original version's
bytes (it still exists at that path) and the resulting delete marker
would hide the new latest. Drop VersionID for those kinds; an empty
VersionID makes the dispatcher fetch the current latest, where
identity-CAS resolves to STALE_IDENTITY and bootstrap re-schedules
with the new latest's identity. NoncurrentDays / NewerNoncurrent /
EXPIRED_DELETE_MARKER still pin the version_id since those are
version-targeted.
isVersionsDir gating on ExtLatestVersionIdKey lost a race window:
createDeleteMarker writes the version file before updating the
parent's Extended pointer, so a walk between those two steps would
see a .versions/ dir without the pointer, recurse into it, and emit
raw version files that the router drops. Match the suffix only and
let expandVersionsDir disambiguate by child inspection: if any child
carries ExtVersionIdKey it's a real .versions container and we expand;
otherwise it's a coincidentally-named user folder and we recurse via
the bucket-walk's own callback so nested entries still flow through.
Tests: latest-expiration assertion flipped to expect empty VersionID;
new tests cover the coincidentally-named-folder recursion and the
race-window expansion (children present, pointer absent).
* fix(s3/lifecycle): filter directory + missing-version-id children at listing
expandVersionsDir's listing callback collected every child with
attributes; subdirectories or entries without ExtVersionIdKey would
make it past the empty-id skip in the inner loop but still inflate
NumVersions and skew NoncurrentIndex (the rank derives from the
filtered slice's position, which was wrong when the unfiltered slice
was sorted). Drop directories at listing time and partition the
file children into a versions slice that's the actual rank source.
Test cleanups: out-of-order-mtime test now sets v1 older than v2 so
latestPos > 0 actually exercises the rank-skip branch in
expandVersionsDir; bootstrapVersionEntry preserves nanosecond
precision via MtimeNs to match markerLoneEntry's pattern; drop a
leftover unused idx variable.
* fix(s3/lifecycle): null version + canonical version-id tiebreak
Two correctness gaps in Phase 5b/3 bootstrap.
Null versions live at the bare logical path, not under .versions/.
Bootstrap previously expanded only .versions/<key>/ children, so:
- pre-versioning objects with newer .versions/ history never had
their null version expired by NoncurrentDays
- suspended-bucket writes (which clear the .versions/ latest pointer
so null becomes current) had every .versions/ child wrongly
classified as latest by the buildObjectInfo fallback
expandVersionsDir now looks up the bare key via NewFullPath +
LookupEntry, accepts a regular file or an explicit S3 directory-key
marker (Mime set), and folds it into the sibling set with
VersionID="null". Latest resolution: pointer present + names a real
id wins; pointer absent + null exists makes null latest; otherwise
falls back to newest sibling. The walker's regular emission for the
bare entry would otherwise duplicate, so walkBucketDir now does a
two-pass walk per directory level — .versions/ first, then everything
else with a per-walk skipBare set keyed by bucket-relative path that
expandVersionsDir populates when it claims a bare null sibling.
Sort tiebreak: PUTs only set second-level Mtime, so two versions
written in the same second tied. The unstable secondary order let
old-format version filenames sort oldest-first and corrupt
NoncurrentIndex under NewerNoncurrentVersions retention. Add
CompareVersionIds to s3lifecycle/version_time.go (mirrors the
canonical comparator in s3api/s3api_version_id.go to avoid the
import cycle) and use it as a secondary key after mtime equality.
Tests: pre-versioning null-as-noncurrent, suspended null-as-current,
directory-key marker as null version, end-to-end claim through
walkBucketDir's two-pass ordering, and same-second tiebreak via
canonical version-id ordering. fakeFilerClient grows a
LookupDirectoryEntry implementation backed by the same in-memory tree.
* fix(s3/lifecycle): only treat explicit-null bare entries as current
The pointer-missing branch in expandVersionsDir made null latest as
soon as a bare object was found. That's correct for suspended-bucket
writes (s3api_object_handlers_put.go writes the bare entry with
ExtVersionIdKey="null") but wrong for the pre-versioning race window:
a brand-new version under .versions/<file> exists before the parent's
ExtLatestVersionIdKey update lands, and a pre-versioning bare object
has no version-id marker. Marking that older bare object latest hides
the real new version and skips noncurrent expiration of the null
until the next process restart/bootstrap.
Distinguish the two: lookupNullVersion now returns whether the bare
entry's Extended map carries ExtVersionIdKey="null" (the suspended
write marker). expandVersionsDir's pointer-missing branch only
promotes null to latest when explicit; otherwise it falls back to
newest-sibling, which is safe for the race window since the new
version's mtime is fresher than the bare object's.
The existing suspended-null test now uses a new helper that adds the
explicit marker. New regression test covers the race window: bare
entry without the marker + a fresh .versions/<v1> file + missing
parent pointer must keep v1 as latest and the null as noncurrent.
* fix(s3/lifecycle): only the newest item can be the explicit-null latest
The pointer-missing branch in expandVersionsDir scanned every item for
an explicit null and promoted it to latest. After a suspended->enabled
transition that's the wrong call: createVersion writes the version
file before updating ExtLatestVersionIdKey, so a bootstrap that lands
in the race window sees an older bare null with ExtVersionIdKey="null"
plus a newer .versions/<v-new> child and no parent pointer. Promoting
the null misclassifies v-new as noncurrent and skips both the new
version's current-version expiration and the null's noncurrent
scheduling until the next bootstrap.
Constrain the explicit-null branch to items[0]: if the suspended-null
write is genuinely current it'll be the newest by mtime AND tagged.
Anything else falls through to the newest-sibling default.
Adds a regression test for the suspended->re-enabled race.
* fix(s3/lifecycle): paginate bootstrap directory listings
SeaweedList(..., limit=0) is a single-page request: the filer caps
limit=0 at DirListingLimit (1000 by default) and returns whatever fits
in one round trip. expandVersionsDir and walkBucketDir both relied on
that, so any directory bigger than the cap silently truncated. For
noncurrent retention this is correctness, not just scale — a hot key
with more versions than the cap had its rank/sort math computed off
the first page only, NumVersions, NoncurrentIndex, SuccessorModTime,
and the latest-fallback all wrong, with the older versions never
scheduled until a future bootstrap.
Add a listAll helper that drives pagination via StartFromFileName +
inclusive=false, looping until a page returns fewer entries than the
configured page size. Use it in both call sites. Page size is a var
(listPageSize, default 1024) so tests can shrink it without
generating thousands of entries.
The fake filer client now mirrors the real semantics: sort children
by name, honor StartFromFileName/InclusiveStartFrom, cap at Limit.
New regression tests force a small page size and assert the full
result set is processed and the call count matches what pagination
should drive.
* perf(s3/lifecycle): stream bucket walk in two passes instead of buffering
walkBucketDir was paginating into a children slice and then iterating
twice (pass 1: .versions/, pass 2: everything else). For flat buckets
with millions of entries the buffer is a real memory spike. Drop the
materialization: each pass now drives its own listAll over the same
directory and acts on entries as they stream in. The skipBare ordering
contract is preserved — pass 2 still runs after pass 1 finishes — and
the per-pass paging keeps memory bounded by listPageSize.
Tradeoff: each directory level is listed twice. For workloads where
that matters more than the memory headroom, we can revisit; the
correctness/scale dial here is what the noncurrent rules need.
Updated three tests for the new call count: each walk now records 2
listings per directory (pass 1 + pass 2). The KickOffNew dedup tests
expect 2 calls per bucket; the pagination test expects 6 instead of 3.
Two follow-ups on PR #9382:
1. Quarantine wasn't sticky. Once CollectHeartbeat crossed the streak
threshold and hid the replica, a subsequent successful read called
checkReadWriteError(nil), wiping the streak; the next heartbeat
then re-announced the suspect replica as read-only and master could
send reads back to a disk that already failed IoErrorTolerance.
Added an ioErrorQuarantined sticky flag set on the first heartbeat
that observes the threshold and cleared only by MarkVolumeWritable
(resetIoErrorState). clearIoError continues to reset just the
streak so successful ops don't accumulate phantom errors.
2. Streamed reads bypassed the EIO counter. readNeedleDataInto and
ReadNeedleBlob — the hot paths for large/range GETs — returned
ReadNeedleData / needle.ReadNeedleBlob errors without threading
them through checkReadWriteError, so a disk failing only on those
paths would never trip IoErrorTolerance. Both now route the
backend error through the tracker, and a fully clean
readNeedleDataInto call clears the streak.
Tests cover the sticky flag (TestQuarantineIsSticky) and the streamed
read path (TestReadNeedleBlobTracksEIO via a fake EIO backend).
* fix(volume): don't nuke local data on transient IO error (#9378)
A single syscall.EIO from any read/write/delete set v.lastIoError, and
the next CollectHeartbeat then called Volume.Destroy on the replica —
removing the .dat/.idx/.vif/.sdx/.ldb/.rdb files. A brief NFS / fabric
/ controller blip hitting several replicas at once could cascade into
removal of the last healthy copy, with no recovery for non-tiered
volumes.
Now require IoErrorTolerance (3) consecutive EIOs before acting, and on
that threshold mark the volume read-only and stop announcing it to the
master so re-replication kicks in from healthy peers — never delete
the data files. The on-disk copy stays for operator inspection /
recovery.
* review: fix race, accounting, recovery, non-EIO streak break
Addressing PR #9382 review:
- Data race on lastIoError: guard lastIoError + lastIoErrorCount with a
RWMutex and expose them through note/clear/get helpers so the
heartbeat reader sees a consistent snapshot. Verified with -race.
- Collection-size accounting: when a volume is quarantined for sustained
EIO, skip the entire per-volume bookkeeping (`continue`) instead of
flipping shouldDeleteVolume — the old branch subtracted a size that
was never added, dragging the collection gauge to zero / negative.
- Recoverability: MarkVolumeWritable now also calls clearIoError so an
operator can rejoin a quarantined replica. The next failed op
re-arms the streak if the disk is still bad.
- Non-EIO streak break: a non-EIO error (e.g. ENOSPC) now resets the
consecutive-EIO counter, so a sequence EIO,EIO,ENOSPC,EIO is treated
as a streak of one — the counter only tracks consecutive EIOs.
Reads already call checkReadWriteError (volume_read.go), so successful
reads also clear the streak — no change needed there.
* feat(s3/lifecycle): sole-survivor delete-marker routing (Phase 5b/2)
Production stores delete markers under <object>.versions/<version-file>;
buildObjectInfo skips every version-folder event because it can't tell
current from noncurrent without sibling state. EXP_DM is the one rule
that can be routed from the file path alone: if the marker is the only
entry under .versions/<key>/ then it's necessarily the latest.
Add SiblingLister; gate the listing on (versioned, version-folder path,
delete-marker entry, EXP_DM rule active for the bucket, lister supplied)
so non-marker version writes pay nothing. The Match carries the LOGICAL
key in ObjectKey and the marker's version_id in VersionID so the
dispatcher can reach deleteSpecificObjectVersion(bucket, logical, vid);
without a version_id the dispatcher would BLOCK and freeze the cursor.
Server-side dispatch re-checks sole-survivor before deleting: another
PUT can land between schedule and dispatch, and identity-CAS only covers
the marker entry, not the directory shape. Lists .versions/<key>/ with
limit 2 and returns NOOP_RESOLVED if count != 1 or the surviving entry
is not the same version.
Fix isDeleteMarkerEntry to compare string(v) == "true" — production
writes []byte("true"), not {1}; every other reader of ExtDeleteMarkerKey
in this repo uses the string predicate.
filerSiblingLister.Count caps at limit 2 — callers only distinguish
"sole survivor" (1) from "more than one" (>=2).
Follows #9373.
* fix(s3/lifecycle): gate sibling listing on active event-driven EXP_DM
hasActionKind tested key presence only; an EXP_DM rule whose action was
inactive (BootstrapComplete=false) or scan-only would still trigger the
sibling-listing RPC even though no match could fire. Replace with a
helper that mirrors the per-key filter Route already applies before
emitting matches: kind matches, snap.Action returns non-nil, IsActive,
and Mode == ModeEventDriven.
Add a regression test that builds a versioned snapshot with the rule
but no PriorStates (action stays inactive) and asserts the lister is
never consulted.
* chore(s3/lifecycle): trim verbose comments
* fix(s3/lifecycle): null version, hard-delete trigger, latest pointer
Three correctness gaps in EXP_DM routing.
1. Null version. SiblingLister.Count saw only .versions/<key>/, but a
pre-versioning bare-key object survives outside that folder when
versioning is enabled later. Marker + null would look like count==1
and EXP_DM would re-expose the old object. Replace Count with
Survivors which also reports HasNullVersion; route- and dispatch-time
suppress when set.
2. Hard-delete trigger. The router skipped events with NewEntry==nil so
a noncurrent hard-delete that left the marker as sole survivor never
fired EXP_DM. Allow version-folder hard-deletes through; the lister's
LoneEntry carries the surviving marker's version_id and identity.
3. Latest pointer. checkSoleSurvivorMarker only checked count and
filename. The worker can race createDeleteMarker between the file
write and the .versions/ directory metadata update. Require
ExtLatestVersionIdKey == versionId; missing pointer returns
retry-later instead of deleting.
Adds a null-version exists check on the dispatch path too.
* fix(s3/lifecycle): normalize null-version lookup errors and detect dir markers
Two correctness bugs in the null-version check.
Route-side: filerSiblingLister called client.LookupDirectoryEntry
directly. SeaweedList wraps not-found via filer_pb.LookupEntry, which
normalizes the gRPC string-mapped not-found into ErrNotFound. The raw
client returns it as a generic error instead, so every absent
null-version (the common case) bubbled up as an error and the router
suppressed every otherwise-valid match. Use filer_pb.LookupEntry.
Both sides: explicit S3 directory-key markers (object names ending in /)
are stored as directory entries with Attributes.Mime set;
processExplicitDirectory in the listing path treats them as null
versions. The previous check was !IsDirectory only, which let the
marker delete proceed and re-expose the directory key. Add
IsDirectoryKeyObject() to both predicates. Also use
util.NewFullPath(...).DirAndName() for the parent/name split so a
trailing-slash key resolves to the same underlying entry path as the
listing code.
* fix(s3/lifecycle): EXP_DM ctx propagation, nil-entry guard, fast-path skip
Three small follow-ups on the EXP_DM dispatch path.
checkSoleSurvivorMarker now takes ctx instead of context.Background()
so worker shutdown / deadlines cancel the SeaweedList RPC instead of
stalling.
If SeaweedList fires the lone callback with entry==nil, firstName
stays empty and the marker-replaced check would short-circuit; that's
the one shape that bypasses the dispatch guard, so retry-later instead.
routeSoleSurvivorMarker now skips the Survivors RPC on regular
non-marker version creates — those always have Count >= 2, so the
listing was wasted load on every versioned write under an EXP_DM rule.
Hard-delete events (NewEntry==nil) and marker creates still flow
through. Added a regression test asserting the regular-create case
doesn't consult the lister.
Documented that logicalKeyFromVersionPath rejects bucket-root markers
intentionally.
Locks down isMPUInitDir, walkBucketDir (regular/nested/MPU/error/cancel
paths), and BucketBootstrapper.KickOffNew (per-bucket fanout and
in-process dedup) against a fake SeaweedFilerClient.
2026-05-08 22:14:45 -07:00
1197 changed files with 111036 additions and 28716 deletions
org.opencontainers.image.description=SeaweedFS is a distributed storage system for blobs, objects, files, and data lake, to store and serve billions of files fast!
@@ -425,7 +426,7 @@ If the hot/warm data is split as 20/80, with 20 servers, you can achieve storage
## SeaweedFS Filer ##
Built on top of the blob store, SeaweedFS Filer adds directory structure to create a file system. The directory sturcture is an interface that is implemented in many key-value stores or databases.
Built on top of the blob store, SeaweedFS Filer adds directory structure to create a file system. The directory structure is an interface that is implemented in many key-value stores or databases.
The content of a file is mapped to one or many blobs, distributed to multiple volumes on multiple volume servers.
@@ -509,20 +510,22 @@ SeaweedFS Filer uses off-the-shelf stores, such as MySql, Postgres, Sqlite, Mong
### Compared to MinIO ###
MinIO follows AWS S3 closely and is ideal for testing for S3 API. It has good UI, policies, versionings, etc. SeaweedFS is trying to catch up here. It is also possible to put MinIO as a gateway in front of SeaweedFS later.
Please note, as Apr 25, 2026 MinIO ceased developement. It's strongly discouraged to use that unmaintained software with multiple security bugs.
MinIO metadata are in simple files. Each file write will incur extra writes to corresponding meta file.
MinIO followed AWS S3 closely and was ideal for testing for S3 API. It had good UI, policies, versionings, etc. SeaweedFS is trying to catch up here.
MinIO does not have optimization for lots of small files. The files are simply stored as is to local disks.
MinIO metadata were in simple files. Each file write will incur extra writes to corresponding meta file.
MinIO did not have optimization for lots of small files. The files were simply stored as is to local disks.
Plus the extra meta file and shards for erasure coding, it only amplifies the LOSF problem.
MinIO has multiple disk IO to read one file. SeaweedFS has O(1) disk reads, even for erasure coded files.
MinIO had multiple disk IO to read one file. SeaweedFS has O(1) disk reads, even for erasure coded files.
MinIO has full-time erasure coding. SeaweedFS uses replication on hot data for faster speed and optionally applies erasure coding on warm data.
MinIO had full-time erasure coding. SeaweedFS uses replication on hot data for faster speed and optionally applies erasure coding on warm data.
MinIO does not have POSIX-like API support.
MinIO did not have POSIX-like API support.
MinIO has specific requirements on storage layout. It is not flexible to adjust capacity. In SeaweedFS, just start one volume server pointing to the master. That's all.
MinIO had specific requirements on storage layout. It is not flexible to adjust capacity. In SeaweedFS, just start one volume server pointing to the master. That's all.
@@ -110,7 +110,9 @@ This is more state than the previous "single subscription, single cursor" claim
**Cursor-skip semantics.** `last_processed[filer_id]` points at the *last resolved event* for that shard. Resume must skip events with position `<= cursor[filer_id]` (using the `(ts, offset)` order per shard) — strict `<=`, not `<`, otherwise the last processed event is replayed on every resume. Equivalently: deliver events with `(event.ts, event.offset) > cursor[filer_id]`. Phase 3 introduces a new API variant that takes per-shard `MessagePosition`s and applies this comparator — see "API change" below. The existing `pb.ReadLogFileRefs` filter `logEntry.TsNs <= startTsNs` (`weed/pb/filer_pb_direct_read.go:333`) is the wrong shape because it can't disambiguate equal-ts events.
**Required API addition** (Phase 3 dependency): `pb.ReadLogFileRefsWithPosition` extending the current `ReadLogFileRefs`:
> **Implementation note:** the API addition described below was not built. The shipped reader uses `SubscribeMetadata` with a single global cursor (the filer's server-side `MetaAggregator` already does the merge). The pseudocode is preserved as design context for a future per-shard architecture.
**~~Required API addition~~ (Phase 3 dependency, not built)**: `pb.ReadLogFileRefsWithPosition` extending the current `ReadLogFileRefs`:
- Take a per-shard `start_positions: map<filer_id, MessagePosition>` instead of a single `startTsNs`.
@@ -565,6 +567,8 @@ Policy changes during a bucket bootstrap: the bootstrap is bound to a specific `
### Reader — single subscription, client-side merge
> **Implementation note (post-Phase 3):** the production reader uses `client.SubscribeMetadata(...)` directly with a single global cursor. The filer's `SubscribeMetadata` server (`weed/server/filer_grpc_server_sub_meta.go`) already aggregates across peer filers — it reads disk-persisted logs from every filer via `sendLogFileRefs` then drains `MetaAggregator.MetaLogBuffer` for the in-memory tail — so the worker doesn't have to assemble its own multi-filer merge. The per-filer-shard cursor model below was designed before this was wired and was not built; the proto fields (`last_processed_original` map keyed by `filer_id`, `tail_drained_streams`) remain as forward-compat stubs. The pseudocode below describes the alternative the design considered, kept here for context. See "Multi-filer durability" and the obsoleted Phase 6 section.
The reader is one cluster-singleton task subscribed to one filer at a time. `Filer.CollectLogFileRefs(start_position, stop_ts)` returns chunk refs from log files in directory order. The worker passes those refs to `pb.ReadLogFileRefsWithPosition` (the new API — see Task #19), which heap-merges per-filer chunks by event ts client-side and applies the per-shard `(ts, offset)` skip filter. Chunk *bodies* are read in parallel from volume servers via the returned fileIds.
Cursors are per-filer-shard. `last_processed_original[D.seconds]` is `map<filer_id, MessagePosition>`; `MessagePosition = {ts_ns, offset}` disambiguates equal-ts events within a per-filer chunk. Resume skips events with `(event.ts, event.offset) <= cursor[filer_id]` — strict `<=` so the last resolved event isn't replayed.
@@ -1394,6 +1398,8 @@ Why a separate lane matters here:
### Multi-filer durability
> **Implementation note (post-Phase 3):** the worker did not end up building its own multi-filer merge. `SubscribeMetadata` on the filer server (`weed/server/filer_grpc_server_sub_meta.go:154`) routes through `MetaAggregator` when peer filers exist: it reads from every filer's disk-persisted logs first (via `sendLogFileRefs`/`Filer.CollectLogFileRefs`), then drains the aggregator's in-memory tail. Workers get an aggregated, durable stream from a single subscription. The per-filer-shard cursor architecture below describes what would be needed if the worker had to assemble the merge itself; we kept it here as design context and as a reference for the proto stubs (`LOST_LOG`, `tail_drained_streams`) that remain forward-compatible if the architecture ever changes. The genuine residual gap — auto-degrading the worker on `ResumeFromDiskError` — is tracked separately as a narrow follow-up rather than a Phase.
`MetaAggregator` is **in-memory only** — `weed/filer/meta_aggregator.go:39`: *"MetaAggregator only aggregates data 'on the fly'. The logs are not re-persisted to disk. The old data comes from what each LocalMetadata persisted on disk."*
So the aggregator can't be the worker's source of truth: a worker restart, a crash, or a peer outage all lose unpersisted aggregated events. The persistent source is per-filer logs at `/topics/.system/log/<date>/<hour-min>.<filerId>` — written by each filer for its own events, durable, and queryable via `Filer.CollectLogFileRefs` and `Filer.ReadPersistedLogBuffer`.
@@ -1904,11 +1910,13 @@ Phasing changed: **the back-stamp cannot be removed until the worker can take ov
- Implement`s3.lifecycle.read` task: cluster singleton, subscribed to one filer at a time. `Filer.CollectLogFileRefs` returns chunk refs in directory order; the worker uses `pb.ReadLogFileRefsWithPosition` (Task #19) to heap-merge per-filer chunks by event ts client-side, with per-shard `MessagePosition` skip filtering. Worker reads chunk bodies in parallel from volume servers. Cursors are per-filer-shard: `last_processed_original: map<delay_seconds, map<filer_id, MessagePosition>>` and `last_processed_predicate: map<filer_id, MessagePosition>` — `LogEntry.Offset` is per-buffer (per filerId), not globally unique, so per-shard cursors are required. Resume skips events with `(ts, offset) <= cursor[filer_id]` (strict `<=`). Listing uses the low-water-mark across per-filer cursors. New shards seeded lazily via `seedNewlyDiscoveredShardsLazily` using`EarliestRetainedPositionPerShard` (Task #19), and seeding clears any matching `tail_drained_streams` marker. Tail-drain GC at task entry uses `RetainedLogRangePerShard` (Task #19) to remove cursor entries where `cursor >= range.latest`, record the matching `tail_drained_streams` key, and downgrade to `scan_only` with `LOST_LOG` if logs vanished before a stream caught up. Failover to another filer endpoint on connection error; per-filer cursor map is portable. Periodic checkpointing (default every 1000 events or 5s) bounds crash redo.
- **Tail-drain tests required in this phase**: (a) cursor at exactly `range.latest` for a shard → tail-drained, entry GC'd, matching `tail_drained_streams` key updated, low-water-mark recovers; (b) cursor before `range.latest` → not GC'd, entry preserved; (c) shard removed from cluster but logs still retained → not GC'd until each stream cursor catches up to `range.latest`; (d) verify low-water-mark advances after GC (otherwise the tail-drain wasn't effective); (e) **lost-log**: shard's logs pruned with a stream cursor still behind `range.latest` and no matching `tail_drained_streams[...]` marker → cursor NOT GC'd, all reader-driven rules promoted to `mode = scan_only` with `degraded_reason = LOST_LOG`, `lifecycle_lost_log_total{filer_id}` increments, warning log emitted; verify `s3.lifecycle.reseed -ack-lost-log --reason <text>` is the only path that clears the lost-log cursor entries and degraded flag together; (f) cross-stream guard: a tail-drained 30-day original stream does not permit GC of the same filer's 60-day original stream or predicate stream; (g) rejoin guard: when a previously tail-drained shard reappears and is lazily seeded, the matching `tail_drained_streams` marker is cleared.
> **Implementation note:** the shipped reader uses `client.SubscribeMetadata(...)` with a single global `(ts_ns, offset)` cursor (`weed/s3api/s3lifecycle/reader/reader.go`). The filer's `SubscribeMetadata` server already aggregates persisted + in-memory logs across peer filers, so the per-filer-shard cursor map and the `RetainedLogRangePerShard` /`EarliestRetainedPositionPerShard` filer RPCs (Task #19) were not built. The tail-drain matrix and lost-log tests below were written against that unbuilt architecture and are obsoleted; the only residual gap — auto-degrading on `ResumeFromDiskError` — is tracked as a separate narrow follow-up. The retention mode-gate, engine routing, predicate-change pass, SKIPPED_OBJECT_LOCK, TRANSPORT_ERROR, and cursor-trail tests remain valid and were exercised against the production reader/router/engine stack.
- Implement `s3.lifecycle.read` task: cluster singleton, subscribed to one filer at a time. ~~`Filer.CollectLogFileRefs` returns chunk refs in directory order; the worker uses `pb.ReadLogFileRefsWithPosition` (Task #19) to heap-merge per-filer chunks by event ts client-side, with per-shard `MessagePosition` skip filtering.~~ The shipped task uses a direct `SubscribeMetadata` subscription; the filer server-side does the multi-filer merge. Cursor is one global `(ts_ns, offset)` position resumed via `SinceNs`. Failover to another filer endpoint on connection error; cursor is portable (one ts). Periodic checkpointing bounds crash redo.
- ~~**Tail-drain tests required in this phase**~~ — obsoleted by the single-cursor architecture; see Phase 6 for context.
- **Retention mode-gate tests** (per `eventLogHorizon` table, kinds beyond age-based): inject a rule of each reader-driven kind and toggle `metaLogRetention` above and below `eventLogHorizon(rule) + bootstrapLookbackMin`; verify the rule is `event_driven` above and `scan_only` with `degraded_reason = RETENTION_BELOW_HORIZON` below. Cover `EXPIRATION_DAYS`, `NONCURRENT_DAYS`, `ABORT_MPU`, `NEWER_NONCURRENT`, `EXPIRED_DELETE_MARKER`. Verify `EXPIRATION_DATE` bypasses the gate regardless of retention.
- Engine drives event routing: `engine.MatchOriginalWrite(event, delay=D)` and `engine.MatchPredicateChange(event)`.
- **One sweep per delay group** (e.g. `1d`, `30d`, `60d`, `90d`); each sweep advances `reader_state.last_processed_original[D.seconds]` (a `map<filer_id, MessagePosition>` — per-shard cursors, not a single position). Single predicate-change sweep clamped to `min(now - smallDelay, now - flushSafetyLag)` advances `reader_state.last_processed_predicate` (also per-shard).
- **One sweep per delay group** (e.g. `1d`, `30d`, `60d`, `90d`); each sweep advances `reader_state.last_processed_original[D.seconds]` (a single global `(ts_ns, offset)``MessagePosition`). Single predicate-change sweep clamped to `min(now - smallDelay, now - flushSafetyLag)` advances `reader_state.last_processed_predicate` (also a single global position).
- One filer fetch per event (`fetchLiveEntryOnce`), reused across all candidate rules.
- Per-event resolution-or-stop: `Resolved` outcomes advance the cursor; `TRANSPORT_ERROR` halts the batch and the cursor stays.
- Engine refreshes when the reader observes a lifecycle-xattr `UpdateEntry` event.
@@ -1941,20 +1949,26 @@ Phasing changed: **the back-stamp cannot be removed until the worker can take ov
- `AbortIncompleteMultipartUpload` driven by events under `.uploads/`.
- Tests covering: new version PUT, delete marker creation, non-current expiration, expired-delete-marker, MPU abort.
The shared-reader design (Phase 3) already reads from the shared filer namespace, so multi-filer correctness is largely subsumed. This phase fills in:
**Status: not built. Architecture moved on; the production reader uses the filer's existing aggregation surface.**
- Per-shard cursors keyed by `filerId` are already in the reader-state proto (Phase 3).
- Filer-set discovery: list `/topics/.system/log/<date>/` and observe filerId suffixes (Phase 3).
- Tail-drain GC implementation using `RetainedLogRangePerShard` (Task #19): cursor entries where `cursor >= range.latest` are removed at task entry AND the stream-specific key is recorded in `reader_state.tail_drained_streams`. Phase 3 tests verify single-shard tail-drain; Phase 6 adds multi-filer convergence tests:
- Two filers actively writing, racing writes against the same key — events from both shards merged correctly, per-shard cursors advance independently.
- Filer A departs (stops writing); its logs are still retained → cursor for A continues to advance until A's `range.latest`; not GC'd before then.
- Filer A reaches `range.latest` for one stream (e.g. original delay 30d), then its logs are pruned: probe returns no range, but the matching `tail_drained_streams[(ORIGINAL,30d,A)]` entry is set → that stream cursor is GC'd as safe; no degradation.
- Filer A later reappears and writes retained logs for that same stream: lazy seeding creates a new cursor and clears `tail_drained_streams[(ORIGINAL,30d,A)]`, so the old safe-drain marker cannot mask a future lost-log event.
- **Lost-log: Filer A's logs are pruned BEFORE another stream cursor reaches `range.latest`** (probe returns no range AND the matching `tail_drained_streams[...]` entry is unset): the reader does NOT GC that cursor; instead, all reader-driven rules are promoted to `mode = scan_only` with `degraded_reason = LOST_LOG`; `lifecycle_lost_log_total{filer_id="A"}` increments; warning logged. Verify cursor stays put until `s3.lifecycle.reseed -ack-lost-log --reason <text>` clears the lost-log cursor entries and degraded flag.
- Worker restart mid-merge → resumes per-filer cursors correctly; both shards continue from their persisted positions; `tail_drained_streams` survives restart.
- Failover to a different primary filer mid-batch — cursor portable, no events skipped or replayed.
What the original Phase 6 set out to add — per-filer-shard cursor maps, `EarliestRetainedPositionPerShard` and `RetainedLogRangePerShard` filer RPCs, `tail_drained_streams` GC, `CollectLogFileRefs` heap-merge, lost-log degraded promotion — was designed under the assumption that the lifecycle worker would have to assemble its own multi-filer view because `MetaAggregator` is in-memory only.
`SubscribeMetadata` already does that work server-side: when the filerhas peer filers it reads disk-persisted logs from every filer first (via `sendLogFileRefs` → `Filer.CollectLogFileRefs`) and only then drains the in-memory aggregator. A single subscription returns a durable, multi-filer-mergedstream. The Phase 3 shipped reader (`weed/s3api/s3lifecycle/reader/reader.go`) consumes that stream with one global `(ts_ns, offset)` cursor and never needed the per-shard cursor map.
What the design's per-shard architecture would have bought us, and why each piece is no longer required:
| Per-filer-shard cursor map | Single global cursor suffices because the filer presents one merged stream. Resume-replay overhead is bounded by `LogFlushInterval` (~1m) and the dispatcher's tick interval (~200ms), so the worst-case redundant work per batch is one minute of events that the cursor compare immediately skips. |
| `RetainedLogRangePerShard` / `EarliestRetainedPositionPerShard` filer RPCs | No per-shard cursor → no need for per-shard probe. `SubscribeMetadata` already returns `ResumeFromDiskError` when the cursor predates retained logs. |
| Tail-drain GC + `tail_drained_streams` | No per-shard cursor → no entries to GC. Departed filers' events are absorbed into the aggregated stream and the global cursor advances past them. |
| Lazy seeding `seedNewlyDiscoveredShardsLazily` | No per-shard cursor → no shards to seed. New filers' events appear automatically through the aggregator. |
Forward-compat stubs that stay in the proto: `LifecycleState.DegradedReason.LOST_LOG`, `ReaderState.tail_drained_streams`, `last_processed_original` keyed by `filer_id`. They cost nothing and keep the on-disk state file readable if a future deployment ever needs a per-shard architecture.
The single residual gap — and the only piece worth building — is auto-degrading the reader when `SubscribeMetadata` returns `ResumeFromDiskError`. Tracked as a separate narrow follow-up (catch the error in `reader.Run`, mark reader-driven actions `scan_only` with `degraded_reason = LOST_LOG`, increment the counter, advance the cursor to retained-earliest, expose `s3.lifecycle.reseed -ack-lost-log` to flip back to event_driven once safety scans cover the gap). It is a ~50-line change, not a Phase.
## Phase 7 — Observability
@@ -1979,7 +1993,7 @@ The shared-reader design (Phase 3) already reads from the shared filer namespace
- Date-rule deletions (`SCAN_AT_DATE` mode: a single scheduled bucket-level bootstrap at `rule.date` deletes all matches inline).
- Periodic safety scans (re-run bootstrap on the per-kind cadence) catch drift over time.
Not-yet-due age-based discovery via meta-log events arrives in Phase 3 (the reader). Versioned buckets remain unhandled until Phase 5; the worker skips them with a logged warning until then. The existing back-stamp keeps simple `Expiration.Days` working in parallel.
- Phase 3 brings steady-state event-driven expiration. The reader is a cluster singleton subscribed to one filer; the worker heap-merges per-filer log chunks client-side via `pb.ReadLogFileRefsWithPosition` (Task #19) with per-shard `MessagePosition` cursors. Multi-filer clusters work the same as single-filer clusters from this point forward.
- Phase 3 brings steady-state event-driven expiration. The reader is a cluster singleton subscribed to one filer via `SubscribeMetadata`, which the filer's `MetaAggregator` already merges across peer filers. Single global `(ts_ns, offset)` cursor; multi-filer clusters work the same as single-filer clusters from this point forward.
- Phase 4 makes `PUT` constant-time. Required dependency: Phase 2 + Phase 3 shipped and stable.
Location: `test/plugin_workers/lifecycle/multi_filer_test.go` (component) plus a multi-filer scenario in `test/s3/lifecycle/` if needed.
**Not built.** Phase 6 was obsoleted by `SubscribeMetadata`'s server-side aggregation (see the Phase 6 section). With a single global cursor on a server-merged stream, there are no per-filer-shard convergence properties for the worker to test — any merge correctness lives inside the filer's `MetaAggregator`, which has its own coverage in `weed/filer/`.
Patterns to copy: `test/multi_master/`, `test/metadata_subscribe/` — both spin up multi-node clusters in-process.
Cases:
- Racing writes to the same key on different filers, **including events with identical `event.ts`** — reader merges per-filer logs by `(event.ts, filer_id, event.offset)` (deterministic ordering across shards because `event.offset` is per-buffer/per-filer and not globally unique). Test asserts the same merge order across runs and that equal-ts events from different filers don't swap relative position.
{{- if and $volume.idx (eq ($volume.idx.type | toString) "emptyDir") }}
{{- fail (printf "%s: idx.type \"emptyDir\" is not supported. An ephemeral index is wiped on every pod restart while the data persists, forcing a full index rebuild from the .dat on each start (a fatal crash on older versions). Use the default (idx: {}, kept next to the data) or a persistentVolumeClaim/hostPath/existingClaim for a separate persistent index." $volumeName) }}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
github-actions[bot]
Chris LuandGitHub
jayandGitHub
os-pradipbabarandGitHub
patrickandGitHub
Lisandro PinandGitHub
msementsovandGitHub
Bruce ZouandGitHub
Sergey ZinchenkoandGitHub
Minsoo KimandGitHub
Ruslan Bel'kovandGitHub
Konstantin LebedevandGitHub
Lars LehtonenandGitHub
ahalaunandGitHub
steve.weiandGitHub
ᎠᎡ. Ѕϵrgϵ ѴictorandGitHub
Parviz MiriyevandGitHub
